Check out "Motomizer" in google play. Trust me on this one.
P.S. I don't know how it's doing it but it's allowing me to overclock and settings remain even after reboot. That's just one of the many goodies.
DX2 running CM7.
Did you just use the one click set up or did you manually set it up?
Travisdroidx2 said:
Did you just use the one click set up or did you manually set it up?
Click to expand...
Click to collapse
I did the one click but seriously look through the whole menu, There are some really cool settings!
Ya I did the one click also and have been looking through the menu. However I do not know enough about the settings to know what to change but it is impressive what you can do with the app.
I found the most cool features to be the screen density and the overclocking
Sent from my CM7 DX2
Where is the overclock and what did you set them both to? This is my first android and its been locked down so not sure what the overclocking does.
set CPU policy, it speeds up your phone basically. Change the minimum.
Sent from my CM7 DX2
Thanks, i will check it out and report back.
Sent from my MB860 using XDA
Ohschit said:
Check out "Motomizer" in google play. Trust me on this one.
P.S. I don't know how it's doing it but it's allowing me to overclock and settings remain even after reboot. That's just one of the many goodies.
DX2 running CM7.
Click to expand...
Click to collapse
Not really overclocking though....we can't due to the bootloader...changing the minimum clock speed just will not let your processor idle at 216, which is the stock minimum I believe, when the min is changed that would be your minimum idle speed....so whatch for higher battery drains when set higher
Sent from my DROID X2 using Tapatalk 2 Beta-5
Thanks for the tip on this app, I've been running it for 4 hours and my X2 is blazin!
ehhhh.... I'm skeptical (guess that's my specialty on these forums ), but I'll try it for myself.
If we have a kernel locked down tight, I don't know why this app would allow us to get around that, but I'll have to see.
Free or paid? What does it set and does that interfere with CM7's built in optimizations? What happens when you remove the one click, does it remove anything that was in CM7 or there before, that it overwrote? Anyone test to see if this effects Bluetooth? I too am skeptical. Someone with more knowledge pull some logcats and see what this does.
y0himba said:
Free or paid? What does it set and does that interfere with CM7's built in optimizations? What happens when you remove the one click, does it remove anything that was in CM7 or there before, that it overwrote? Anyone test to see if this effects Bluetooth? I too am skeptical. Someone with more knowledge pull some logcats and see what this does.
Click to expand...
Click to collapse
There is a donate version with extra features as well as a free version. I am fairly new to this app, I'm not sure it would play nice with CM7s performance settings
Sent from my Milestone X2 using Tapatalk 2 Beta-5
theredvendetta said:
ehhhh.... I'm skeptical (guess that's my specialty on these forums ), but I'll try it for myself.
If we have a kernel locked down tight, I don't know why this app would allow us to get around that, but I'll have to see.
Click to expand...
Click to collapse
That's exactly why I was shocked at what this app was seemingly allowing us to do.
Sent from my MB870 using Xparent Cyan Tapatalk
So an increase in performance should be revealed in Smartbench '12?
skwoodwiva said:
So an increase in performance should be revealed in Smartbench '12?
Click to expand...
Click to collapse
Three tests, 1901, 1921, 1916. Completely stock 2.3.6 Milestone X2 with all bloatware. No mods, only rooted with tweaks applied from within Motomizer. Will run de-blur script in a little while and test again
skwoodwiva said:
So an increase in performance should be revealed in Smartbench '12?
Click to expand...
Click to collapse
Says smartbench 12 is not compatible with my phone (DX2 CM7). Cant download from market
Sent from my MB870 using Xparent Cyan Tapatalk
Weird '12 won't work w/ cm7.
On my mx2 port beta I get~ 2150/1750 simi bloated, deodexed , speedyV7.
skwoodwiva said:
Weird '12 won't work w/ cm7.
On my mx2 port beta I get~ 2150/1750 simi bloated, deodexed , speedyV7.
Click to expand...
Click to collapse
Same as above w/ motomizer & 2nd core (manual method) : 2450/1900
Ohschit said:
Says smartbench 12 is not compatible with my phone (DX2 CM7). Cant download from market
Sent from my MB870 using Xparent Cyan Tapatalk
Click to expand...
Click to collapse
Figured it out. Just had to change screen density to 160. Now all is compatible again.
Sent from my MB870 using Xparent Cyan Tapatalk
Related
anybody able to achieve overclock with x2 on rooted gb yet? or know a working overclocking app. let me know thanks guys!
No and I doubt we will tell we have kernel access
Sent from my DROID X2 using XDA Premium App
Please rename this tread and put ' [Q] ' before it. I thought that someone has achieved overclock.. haha.
0vermind said:
Please rename this tread and put ' [Q] ' before it. I thought that someone has achieved overclock.. haha.
Click to expand...
Click to collapse
Same here, got so excited for a minute there, lol.
Me too i'm kinda pissed now
Yeah. With all the chatter about an unlocked bootloader yesterday I thought someone was dropping an H-Bomb of goodness on the X2 forum this evening.
Sent from my DROID X2 using XDA Premium App
lol i wish i could have figure out how to overclock this thing first that would be awesome!!
I wonder how far off we are from a fully unlocked boot loader.......One could only wish for this, its the only piece missing
0vermind said:
Please rename this tread and put ' [Q] ' before it. I thought that someone has achieved overclock.. haha.
Click to expand...
Click to collapse
lol...eyes got all big!
0vermind said:
Please rename this tread and put ' [Q] ' before it. I thought that someone has achieved overclock.. haha.
Click to expand...
Click to collapse
+1. You really got my hopes up reading that...
I realized overclocking would be a massive achievement for the X2... But is it even really necessary at this time? We are running 1ghz, dual core, tegra2 chips.
What app or game out there right now we cant already run smooth as butter?
Why is it wanted so bad right now is what I'm asking i guess. When i over clocked my d1 to 1.1ghz It didn't seem like a nearly 50% increase in performance even though i nearly doubled the clock speeds. Sure my quadrant went up but real world applications meh.
infinity8x3 said:
I realized overclocking would be a massive achievement for the X2... But is it even really necessary at this time? We are running 1ghz, dual core, tegra2 chips.
What app or game out there right now we cant already run smooth as butter?
Why is it wanted so bad right now is what I'm asking i guess. When i over clocked my d1 to 1.1ghz It didn't seem like a nearly 50% increase in performance even though i nearly doubled the clock speeds. Sure my quadrant went up but real world applications meh.
Click to expand...
Click to collapse
Why would you ask such a goofy question? We want to because we can't now. Duh! =-)
Sent from my DROID X2 using XDA Premium App
ferg40 said:
Why would you ask such a goofy question? We want to because we can't now. Duh! =-)
Sent from my DROID X2 using XDA Premium App
Click to expand...
Click to collapse
Ya, I Can't Wait To Watch My Phone Meltdown!
Even if we ever get overclocking most people probably wont do it, we just want to have the ability too, if anything i just want a tweak a few things
The biggest problem is that we need a kernel that supports overclocking. With a STILL locked bootloader, we can't do that yet. So no unleashing the beast just yet.
Sent from my DROID X2 using XDA App
Well the night thing being that if we can over clock, that meeans that we can underclock and undervolt, which will hell battery life tremendously. Now, with that being said, I do hand to admit that Gingerbread has been funaminal with battery life!! Even with wifi on.
Mike
Tapin' the talk from my Droid x2.
0vermind said:
Well the night thing being that if we can over clock, that meeans that we can underclock and undervolt, which will hell battery life tremendously. Now, with that being said, I do hand to admit that Gingerbread has been funaminal with battery life!! Even with wifi on.
Mike
Tapin' the talk from my Droid x2.
Click to expand...
Click to collapse
Im not trying to be rude, but I could barely understand that
Sent from my DROID X2
KurioHonoo said:
Im not trying to be rude, but I could barely understand that
Sent from my DROID X2
Click to expand...
Click to collapse
I Don't Think He Understands That We Can Already Underclock, We Don't Need Kernel Access For That. I'm Always Underclocked At 816,000.
MikeJ92YJ said:
I Don't Think He Understands That We Can Already Underclock, We Don't Need Kernel Access For That. I'm Always Underclocked At 816,000.
Click to expand...
Click to collapse
How's the phone run like that? Do you play any graphic or cpu intensive games with it at 816?
Sent from my DROID X2
KurioHonoo said:
How's the phone run like that? Do you play any graphic or cpu intensive games with it at 816?
Sent from my DROID X2
Click to expand...
Click to collapse
No No, That's How I Have It Set For My Daily Driver. If I Play A Game Or Something Graphic Related I Bump It Back Up. Sometimes I Also Raise The Min. Too That Way It Lag Or Bottom Out.
Hi
I tried to OC'ed my Touchpad 32Gb using the Beta Feed to 1.7Ghz, but it seems laggy sometimes. Is it because of the feed? Should I remove it and use only the stable feed?
Thanks
I'm using kernel Warthog and F4 (both are beta feeds) and they are very stable for me. Did you install all the patchs from Preware?
Hey I wanna know Which kernel is best for battery? I use Ctrlondemand in Preware. And I run it 1.5. What do you think? Best battery and performance kernel? What is it? Thanks for answer
Best battery would be to under clock the processor lol as for speed, uninstall your kernel and download f4, I had another one that would only use one core of the processor, phantom uses both.
Sent from my Nexus S 4G using xda premium
Sent from my Nexus S 4G using xda premium
ghostzyden said:
Best battery would be to under clock the processor lol as for speed, uninstall your kernel and download f4, I had another one that would only use one core of the processor, phantom uses both.
Sent from my Nexus S 4G using xda premium
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Every kernel for the touchpad uses both cores.
Not the one I was using, govnah only showed one core no matter what I did. Not trying to argue, maybe it was just mine
Sent from my Nexus S 4G using xda premium
ghostzyden said:
Not the one I was using, govnah only showed one core no matter what I did. Not trying to argue, maybe it was just mine
Click to expand...
Click to collapse
That is an indication that you didn't disable your previous Govnah profile before switching kernels, or that you are using an alpha kernel for which Govnah has not yet been updated to support (that's one reason why you shouldn't use alpha kernels unless you know what you are doing and can control it from the command line).
Every webOS TouchPad custom kernel has always overclocked both cores.
You don't want the second core running unless it is required. You don't keep your engine idling at 7000RPM when you're sitting at the traffic lights.
-- Rod
Maybe it was alpha, I got it before preware switched. anyway, the one i'm currently using seems to be stable, thanks for the info i'm trying to learn as much as I can in my spare time but I am still a noob
Sent from my Nexus S 4G
I am using Warthog and its working good, battery life seems to be a little shorter than uberkernal but it is running the CPU at a higher clock. Every once in a while it does seem a little jittery though.
rwhitby said:
You don't want the second core running unless it is required. You don't keep your engine idling at 7000RPM when you're sitting at the traffic lights.
-- Rod
Click to expand...
Click to collapse
thats gold right there rod, keep em comin, i love your witty retorts
Solidus_n313 said:
thats gold right there rod, keep em comin, i love your witty retorts
Click to expand...
Click to collapse
I learned my lesson lol but I wish it didn't sound as rude. I am learning and I will not post about things I haven't learned any longer. Best wishes and my apologies. Gotta mess with it to learn lol
Sent from my Nexus S 4G using xda premium
hakkinenvthh said:
I'm using kernel Warthog and F4 (both are beta feeds) and they are very stable for me. Did you install all the patchs from Preware?
Click to expand...
Click to collapse
I'm using Warthog and installed all patches possible. But sometimes, the touch doesn't response right away, seems like a 1 - 2 seconds lag (I do have the Increase Touch Sensitivity.... or watever it called... patch installed)
lavangbay said:
I'm using Warthog and installed all patches possible. But sometimes, the touch doesn't response right away, seems like a 1 - 2 seconds lag (I do have the Increase Touch Sensitivity.... or watever it called... patch installed)
Click to expand...
Click to collapse
That's what was happening to me, I switched to f4 phantom and it solved that issue. warthog may just not be as stable. Hope I helped.
Sent from my Nexus S 4G using xda premium
ghostzyden said:
Not the one I was using, govnah only showed one core no matter what I did. Not trying to argue, maybe it was just mine
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Set up a new profile with CPU features set to 'ondemand' rather than 'ondemandtcl'. This got both cores working. I'm using Uberkernel oc'd to 1.5.
chicle_11 said:
Set up a new profile with CPU features set to 'ondemand' rather than 'ondemandtcl'. This got both cores working. I'm using Uberkernel oc'd to 1.5.
Click to expand...
Click to collapse
Thank you, I appreciate it
Sent from my Nexus S 4G using xda premium
ghostzyden said:
That's what was happening to me, I switched to f4 phantom and it solved that issue. warthog may just not be as stable. Hope I helped.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Strange, in the thread that show us how to Overclock, the author said F4 Phantom might not be stable and could reset the Touchpad in some cases... have anyone else experienced with F4 Phantom?
ghostzyden said:
That's what was happening to me, I switched to f4 phantom and it solved that issue. warthog may just not be as stable. Hope I helped.
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
When you switch from Warthog to F4, do you have to remove Warthog first, then install F4?
I tried to install F4 without removing Warthog and getting some kind of error...
lavangbay said:
When you switch from Warthog to F4, do you have to remove Warthog first, then install F4?
I tried to install F4 without removing Warthog and getting some kind of error...
Click to expand...
Click to collapse
Yes. Go into installed packages, kernels, warthog, remove. Then you can install f4
Sent from my Nexus S 4G using xda premium
lavangbay said:
Strange, in the thread that show us how to Overclock, the author said F4 Phantom might not be stable and could reset the Touchpad in some cases... have anyone else experienced with F4 Phantom?
Click to expand...
Click to collapse
I've never had any issues with f4. But its all considered alpha or beta so it COULD be unstable.
Sent from my Nexus S 4G using xda premium
ghostzyden said:
Yes. Go into installed packages, kernels, warthog, remove. Then you can install f4
Sent from my Nexus S 4G using xda premium
Click to expand...
Click to collapse
Great, thanks for your help
I was just wondering what different tweaks people use that work. The only thing I been using is jokers 1.3 kernal on cm7 and just tried 3g/4g optimizer for 3g boost. I am new here so off I'm curious as to what you guys use for tweaking things like 3g etc....
Sent from my CM7ed MoPho
Hello and welcome! 3g tweaks are one of those grey areas in which people seem to have varying results. None have ever done much for me.. However, zeroing out any proxies within your build.prop usually seems to get me slightly faster and more reliable 3g speeds. CM7 is pretty optimized from the get-go, but i urge you to make good use of that kernel. By that i mean, sit down and really set up profiles, underclock by no more than 50 if you want to be sure you get no random reboots, run the powersave governor instead of performance (with deadline), dont bother overclocking unless youre really obsessed with benchmarking scores as jokers mods to the kernel improve performance at stock frequencies and visible performance gains are minimal with overclock. If everything is set up correctly, don't bother using a battery saver app as profiles can generally do the same thing. Dont use task killer apps, they hurt battery performance and do more harm than good. Might wanna check out startup manager to dictate which apps start upon boot if you have a ton of apps. Check out an app called ad away to get rid of those pesky ads. Rom Toolbox Lite app is good for many many little tweaks as well. Thats all i can really think of right this second. Other than these i like to keep it generally clean.
What is the most accurate speed test app? I been using speedtest.net mobile.
Sent from my CM7ed MoPho
There isn't. All of them are slightly inaccurate. Best way to judge your speed is to actually download something.
Hmm. My task killer making my performance worse?
*rage flips table*
Sent from my MB855 using xda premium
XxCE0xX said:
Hmm. My task killer making my performance worse?
*rage flips table*
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
You'll find your phone actually runs smoother without the task killer. They were useful in the days when phones had limited amounts of ram. With today's phones its redundant given that android has its own 'task killer' built in.
Yup. I noticed. Runs all smooth now.
*patiently waits for MoPho ics drivers for no more bugs*
Only thing bothering me is the keyboard is iffy and the browser FC bug.
Not going back to cm9. Aokpcb is smoother
Sent from my Kitchen Sunk MoPho
Ya I just went back to cm7 the other day myself. I too will patiently wait for stable ics.
Sent from my CM7ed MoPho
bigblue4life said:
Ya I just went back to cm7 the other day myself. I too will patiently wait for stable ics.
Sent from my CM7ed MoPho
Click to expand...
Click to collapse
I too went back to cm7 the other day. And I've managed to get it looking and feeling exactly like cm9 minus the bugs, so I'm happy.
Sent from my MB855 using xda app-developers app
Acvice said:
I too went back to cm7 the other day. And I've managed to get it looking and feeling exactly like cm9 minus the bugs, so I'm happy.
Sent from my MB855 using xda app-developers app
Click to expand...
Click to collapse
Nice, if you could send me the info of what you used or post it here I would really appreciate it.
Sent from my CM7ed MoPho
bigblue4life said:
Nice, if you could send me the info of what you used or post it here I would really appreciate it.
Sent from my CM7ed MoPho
Click to expand...
Click to collapse
-Icons and Launcher Theme
-CM7 Theme
-Go launcher (Holo doesnt support ADW icon themes yet or this would be the better choice)
Result:
Has anyone tried this? I saw it on droid-life today and wondered what everyone thought. http://forum.xda-developers.com/showthread.php?t=1908269
sent from my rezound running rage
I found it yesterday (or two days ago) via LifeHacker of all places and ran it on my N7 and my Rezound running Neo's cm9. It's an amazing tool and has definitely made my devices faster, at least I think it does lol Either way it's freaking awesome!
Which are we?
Sent from my Rezound using xda app-developers app
brando56894 said:
I found it yesterday (or two days ago) via LifeHacker of all places and ran it on my N7 and my Rezound running Neo's cm10. It's an amazing tool and has definitely made my devices faster, at least I think it does lol Either way it's freaking awesome!
Click to expand...
Click to collapse
Neo's cm10????
Sent from my Rezound using xda app-developers app
Ohschit said:
Which are we?
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
XHDPI
anyone know why the hell this isn't working???????
Sent from my Rezound using xda app-developers app
pwned3 said:
Has anyone tried this? I saw it on droid-life today and wondered what everyone thought. http://forum.xda-developers.com/showthread.php?t=1908269
sent from my rezound running rage
Click to expand...
Click to collapse
Thanks for pointing this out!
Sent from my Rezound using xda app-developers app
Ohschit said:
Neo's cm10????
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Haha you caught me! I have a N7 also so I get confused sometimes
Bah, I stay far away from these "so-called" build.prop tweaks. They do nothing but people keep thinking they work...I guess because they just see commands and numbers and think they must work. All they do is simply lag the phone in some way or another and destroy battery life. After all, placebo is popular in the android world.
richii0207 said:
Bah, I stay far away from these "so-called" build.prop tweaks. They do nothing but people keep thinking they work...I guess because they just see commands and numbers and think they must work. All they do is simply lag the phone in some way or another and destroy battery life. After all, placebo is popular in the android world.
Click to expand...
Click to collapse
Well just hold on there, I can vouche for the enhance image quality tweak.
I still have yet to verify is this actually does anything worthwhile. I just did a clean flash of Neo's AOKP 1.5 and ran quadrant a few times, then Pimped it out and then re-ran Quadrant. The score was higher.... but that was because GPU rendering apparently wasn't enabled the first time Otherwise the scores were just about the same. It sucks that there's no effective/absolute way to test these sorts of thing out.
Updated to 2.0, more options and tweaks
Sent from my Rezound using xda app-developers app
I wonder if this would be good on a sense 3.6 rom. Particularly ZHP's rom.
richii0207 said:
Bah, I stay far away from these "so-called" build.prop tweaks. They do nothing but people keep thinking they work...I guess because they just see commands and numbers and think they must work. All they do is simply lag the phone in some way or another and destroy battery life. After all, placebo is popular in the android world.
Click to expand...
Click to collapse
+1
Device: HTC Rezound - S-OFF
Firmware: 4.03.605.2
HBOOT: HBOOT 2.27 *Unlocked* *Vinylfreak89*
Radios: 2.22.10.0801r, 2.22.10.0803r
Recovery TWRP v1.0 2.3.1.1
Kernel/ROM: Kernel Rezound Cubed ICS Kernel 2.3.9/ROM ViperRez 1.0.3
Kernel/ROM: Kernel Snuzzo Funky Kernel v1.3/ROM CM9 Project Rachel v1.2
richii0207 said:
Bah, I stay far away from these "so-called" build.prop tweaks. They do nothing but people keep thinking they work...I guess because they just see commands and numbers and think they must work. All they do is simply lag the phone in some way or another and destroy battery life. After all, placebo is popular in the android world.
Click to expand...
Click to collapse
some of them work. for example I always tweak my call ring delay, and on other phones tweaked the camera with changes to image and video compression, recording frame rate, set wider wifi scan intervals, and have added custom tagging in various places within the os. I am also sure that many other working tweaks exist that I never tried.
johnwaynegacy said:
some of them work. for example I always tweak my call ring delay, and on other phones tweaked the camera with changes to image and video compression, recording frame rate, set wider wifi scan intervals, and have added custom tagging in various places within the os. I am also sure that many other working tweaks exist that I never tried.
Click to expand...
Click to collapse
This
Sent from my Rezound using xda app-developers app
Can someone please post their AnTuTu Benchmark score with the HTC DROID DNA? (Stock ROM, not overclocked)
The app was recently updated with new score metrics, but I don't have a DNA here any long to test.
Thanks.
Sent from my Droid DNA
Here's mine.
Sent from my HTC6435LVW using xda app-developers app
20169 (x920e)
Mine was something like 18,500 or around there.
Lol, and Droidforums mentions the DNA commonly scores between 13-14k.
orangechoochoo said:
Lol, and Droidforums mentions the DNA commonly scores between 13-14k.
Click to expand...
Click to collapse
Hahah that's what I scored when I multitasked everything I could on my DNA. I'm currently 100% stock and I never see anything lower then 18000 unless I really try.
Sent from my HTC6435LVW using xda app-developers app
Mine. Stock non-rooted.
Sent from within using Tapatalk 2
I've never seen above 18,700...how are you guys getting 20k?
croppz said:
I've never seen above 18,700...how are you guys getting 20k?
Click to expand...
Click to collapse
Are you on a custom Rom or kernel? I'm still on stock but rooted and am not doing anything special (i.e. not killing any apps before running the benchmark). My score is typically between 19,500 - 20,500. 18,700 is fine though, maybe you have an app that is running on the background slowing things down a bit.
jlevy73 said:
Are you on a custom Rom or kernel? I'm still on stock but rooted and am not doing anything special (i.e. not killing any apps before running the benchmark). My score is typically between 19,500 - 20,500. 18,700 is fine though, maybe you have an app that is running on the background slowing things down a bit.
Click to expand...
Click to collapse
Nope, phone is stock not rooted either, probably gonna leave it that way too until I get bored and decide to take the jump and unlock my phone.
I have no issue with the scores I got, just was curious. This phone is still fast as hell.
21k consistently. Custom ROM, stock kernel.
Cubed kernel with Digital dream ROM
9602 - yup I am the slow kid on the block
You must be missing the 1 before the 9.
orangechoochoo said:
You must be missing the 1 before the 9.
Click to expand...
Click to collapse
no I am serious., but I got better score in quadrant. I am using digital dream rom
Do see this. I am not alone http://forum.xda-developers.com/showthread.php?p=36790492
Sent from my HTC6435LVW using XDA Premium HD app
Thanks everyone for replying, I got enough scores to go by.
I changed from cubed kernel to LK Dna kernel, back to 18k+..
Sent from my HTC6435LVW using XDA Premium HD app
Running everything stock and haven't hit anything below 20k.