I just want to know if I flash a custom kernel and it is failed can i restart flashing to custom kernel again or i need to repair it with some complicated procedures.
Thanks in advance
gaiger said:
I just want to know if I flash a custom kernel and it is failed can i restart flashing to custom kernel again or i need to repair it with some complicated procedures.
Thanks in advance
Click to expand...
Click to collapse
If something fails yes you can flash custom kernel again, but also you can restore always back to stock with any problems.
Sent from my MT15i using Tapatalk
taaviu said:
If something fails yes you can flash custom kernel again, but also you can restore always back to stock with any problems.
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
thanks dude
Related
Hello, I'm using nAa kernel v011 & MiniCM 2.2.0, I wanted to revert back to stock 2.1, I tried SEUS and seus say my phone has the latest update installed, and there is just an exit button, can some1 help me? I tried flashing stock kernel and use SEUS but still ended with the same result
Sent from my E10i using XDA
It is always suggested to take a backup of stock rom before installing any custom rom..have you taken any backups?
I did not make a backup when I flashed custom roms because I was a complete noob and I just flash a custom rom. Btw thanks for your reply.
Sent from my E10i using XDA
Download any rom for ur device which completely works with stock kernel....
Then 1st do necesary wipes
Install custom rom
Flash stoock kernel...
Boot. Properly
And then try with pc companion or SEUS
But if I'm using a custom kernel and if I flash a rom that is compatible with stock kernel wont recovery will say incompatible kernel found? I've tried that before.
Sent from my E10i using XDA
Dude I mean a rom which is compatible wit both stock kernel and custom kernel
Well then can you tell me which rom is compatible with both kernel please? Thank you
Sent from my E10i using XDA
lthy31 said:
Well then can you tell me which rom is compatible with both kernel please? Thank you
Sent from my E10i using XDA
Click to expand...
Click to collapse
the thread which you want to download a custom rom always clearly stated the kernel to use with the rom
sahniana said:
the thread which you want to download a custom rom always clearly stated the kernel to use with the rom
Click to expand...
Click to collapse
That means I have no hope already? Sad
Sent from my E10i using XDA
lthy31 said:
That means I have no hope already? Sad
Sent from my E10i using XDA
Click to expand...
Click to collapse
u have already installed naa kernel, meaning that you have unlocked bootloader. this article said that you can update through SEUS if you have unlocked the bootloader. i'm not experienced with x10mp bootloader issue before this but my gtab7 experienced bootloader problem after unlocked,flash the stock bootloader and solved the problem.
but you said that you have flash the stock kernel and still cant install through seus. why dont you try to reinstall seus,mybe something wrong with it. and btw,did you manage to flash stock kernel successfully?
sahniana said:
u have already installed naa kernel, meaning that you have unlocked bootloader. this article said that you can update through SEUS if you have unlocked the bootloader. i'm not experienced with x10mp bootloader issue before this but my gtab7 experienced bootloader problem after unlocked,flash the stock bootloader and solved the problem.
but you said that you have flash the stock kernel and still cant install through seus. why dont you try to reinstall seus,mybe something wrong with it. and btw,did you manage to flash stock kernel successfully?
Click to expand...
Click to collapse
Yeah I successfully flashed stock kernel, I'll try reinstalling seus, thanks
Sent from my E10i using XDA
Is there any way to get a custom recovery installed on the LQ5 ICS 4.0.4 without flashing a custom kernel?
Related to that, all I'm looking for is a way to make a nandroid backup with restore option, so if there's a third-party way of doing it, I'd appreciate any suggestions.
I've always used CF-Root Kernels, but I just Mobile Odin flashed this ROM and I have stock recovery, so the backup/restore features are gone.
Just flash the latest CF-Root kernel via Odin in the PDA section and you will obtain your custom recovery. No other way for it.
Sent from my GT-I9100 using Tapatalk 2
themadba said:
Just flash the latest CF-Root kernel via Odin in the PDA section and you will obtain your custom recovery. No other way for it.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
From what I can see, that's LPK 5.5, right?
Can I flash it via Mobile Odin?
donalgodon said:
From what I can see, that's LPK 5.5, right?
Can I flash it via Mobile Odin?
Click to expand...
Click to collapse
I'll be extra cautious, as what I'm seeing here is it might have the emmc brick bug in kernel.
So what ever you do do not wipe using stock recovery.
I'm using the save ROM and loving it. But will wait for any more news.
Though I have wiped multiple times using the dial code.
Yes I believe you just flash the latest CF-Root either via Mobile Odin or normal Odin. As atifsh said, don't wipe anything in the stock recovery as the MMC_CAP_ERASE seems to still be present and will eMMC brick your device, which is a real pain considering Samsung know about this. But it is still only a leaked ROM, so be very cautious.
Sent from my GT-I9100 using Tapatalk 2
themadba said:
Just flash the latest CF-Root kernel via Odin in the PDA section and you will obtain your custom recovery. No other way for it.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Look at this:
http://forum.xda-developers.com/showpost.php?p=28336465&postcount=331
If you flash other kernel and you don't re-flash then the original one some things like bluetooth will not work....
If you do my procedure you will have CMW, Root & the most important thing: THE ORIGINAL KERNEL!!! :cyclops::good:
PRESS TNX BUTTON IF I HELP YOU :good:
When I flashed the Stock_LQ5-CWM.zip above, I lost custom recovery and went back to stock recovery.
Chainfire has released CF-Root for LQ5, so problem solved.
Thanks for the input.
I have a question is it still possible to flash my current kernel to stock even installed the custom rom?
I am still a noob, thank you i appreciate your answers :fingers-crossed:
hakkaijuan said:
I have a question is it still possible to flash my current kernel to stock even installed the custom rom?
I am still a noob, thank you i appreciate your answers :fingers-crossed:
Click to expand...
Click to collapse
Extract kernel.sin of the stock ftf you want and flash it..
Use the thank button, it's there for a reason
Sent from my LT26i using xda premium
As said in title, does the kernel you need to flash for CyanogenMod 9 on XU have inbuilt CWM? Noob here, been lurking a while though, just a little confused.
Thanks in advance, eskriminal
eskriminal said:
As said in title, does the kernel you need to flash for CyanogenMod 9 on XU have inbuilt CWM? Noob here, been lurking a while though, just a little confused.
Thanks in advance, eskriminal
Click to expand...
Click to collapse
Yes
Sent from my ST25i using Tapatalk 2
one more question, how long is the first boot of CM9 for XU meant to take, currently stuck on boot animation?
eskriminal said:
one more question, how long is the first boot of CM9 for XU meant to take, currently stuck on boot animation?
Click to expand...
Click to collapse
Wait a while, but if not booting then you need to flash stock rom, flash CM boot.img, and then flash the ROM again.
mirost1 said:
Wait a while, but if not booting then you need to flash stock rom, flash CM boot.img, and then flash the ROM again.
Click to expand...
Click to collapse
Thanks, but do i use the Sony tool to reflash stock? currently using (munjeni's i think?) cwm touch
could that be the problem?
also, what is the exact procedure to go from the flashed stock into flashing the rom? any cache wipes etc required?
eskriminal said:
Thanks, but do i use the Sony tool to reflash stock? currently using (munjeni's i think?) cwm touch
could that be the problem?
also, what is the exact procedure to go from the flashed stock into flashing the rom? any cache wipes etc required?
Click to expand...
Click to collapse
Use flashtool
Sent from my ST25i using Tapatalk 2
and when flashing the rom zip, what procedure in cwm?
thanks so much for helping out with my noob questions by the way guys
okay, it booted now, fixed it by using keiran's recovery kernel instead of munjeni or the fxp one
thanks a lot for the help guys
Why don't you press thanks
Sent from my ST25i using xda premium
Hello, i need some help.
The kernel i have been trying to use is: X10_4.1X_CMX10_bootmanager_v13 + v_14 and alot more, but i can't come in to the recovery after changing kernel. but with the "Stock" kernel in flashtool i can get into recovery. cwm and the other, but then i can't install the rom i want, i need to install the kernel above before i can install the rom. Sry for my bad english, but i hope u understand.
bump since i edited.
Comeone guys, someone know why i cant get into cwm after changing kernel
The problem is you are trying to install kernels that is not supported by your ROM.
Have you unlocked your bootloader? Check it using S1Tool
I had the same problem with that kernel I couldn't get into recovery. Which rom are you trying to install JB? Or ICS? Try armin kernel for ics or jb and see that's what I used
Sent from my X10i using xda premium
dunc4n88 said:
I had the same problem with that kernel I couldn't get into recovery. Which rom are you trying to install JB? Or ICS? Try armin kernel for ics or jb and see that's what I used
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Im on donutHD now and original kernel that comes when i unlocking bootloader with flashtool, everything goes ok when uim flashing kernel but it's just bootlooping and i cant get into recovery with all kernels i have tried. i cant try to install anyrom because just of that, but it's slimbean, and paranoid android i wan't to install.
jai554 said:
The problem is you are trying to install kernels that is not supported by your ROM.
Have you unlocked your bootloader? Check it using S1Tool
Click to expand...
Click to collapse
Yes i have unlocked my bootloader.
baxee said:
Yes i have unlocked my bootloader.
Click to expand...
Click to collapse
try to install CM7 based rom then flash DoomKernel... see if it works
Yeah just remembered you have to flash a cm7 kernel before flashing any sort of cm10 kernel
Sent from my X10i using xda premium
jai554 said:
try to install CM7 based rom then flash DoomKernel... see if it works
Click to expand...
Click to collapse
dunc4n88 said:
Yeah just remembered you have to flash a cm7 kernel before flashing any sort of cm10 kernel
Sent from my X10i using xda premium
Click to expand...
Click to collapse
Someone have the link? can't find.
baxee said:
Someone have the link? can't find.
Click to expand...
Click to collapse
Try search Zdzihu-003 CM7.1
jai554 said:
Try search Zdzihu-003 CM7.1
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1213843
There? And shall i flash both rom and kernel`? then after flash the kernel and rom i want? thx for the help dude.
Problem solved, thx guys.