So I have the prime and a ps3 controller and i changed the controller mac address to the primes and i can get it to connect using the sixaxis app but when i open up and emulator and try to configure the controls it registers one of the joysticks and the dpad as the same and wont even register the other joystick, did i do something wrong? also USB/BT Joystick Center wont even detect the controller, and I dont have the usb adapter or keyboard. It sees the right joystick and dpad as the same and wont detect the left analog stick movement besides pressing L3
scottrod said:
So I have the prime and a ps3 controller and i changed the controller mac address to the primes and i can get it to connect using the sixaxis app but when i open up and emulator and try to configure the controls it registers one of the joysticks and the dpad as the same and wont even register the other joystick, did i do something wrong? also USB/BT Joystick Center wont even detect the controller, and I dont have the usb adapter or keyboard. It sees the right joystick and dpad as the same and wont detect the left analog stick movement besides pressing L3
Click to expand...
Click to collapse
Just to let you know the ps3 controller works on the prime without any root or sixaxis app. Just turn on BT on the prime, plug in the ps3 controller through usb port and turn on the Ps3 controller. Wait a few secs so it can pair, unplug and your up and running without any cables. Been using mine with bluetooth without any problems.
hungrybear said:
Just to let you know the ps3 controller works on the prime without any root or sixaxis app. Just turn on BT on the prime, plug in the ps3 controller through usb port and turn on the Ps3 controller. Wait a few secs so it can pair, unplug and your up and running without any cables. Been using mine with bluetooth without any problems.
Click to expand...
Click to collapse
I don't have the usb adapter :/
bump still got no solution without USB adapter!
In your emulators settings (I use nesoid, snesoid etc) did you go into Other Settings> and check "Use Input Method" ? It says enable special input device eg bluetooth gamepad.
I have the same issue and I have the paid version and after. 21 update it doesn't work which really pisses me off... .21 update worst update so far? Fair to say?
http://www.amazon.com/USB-Gender-Changer-Female-To/dp/B000BSN4UY
Would this solve your problem? I haven't gotten mine yet but for that price it's worth a shot with the stock USB cable. I have the dock so my PS3 controller plugged right up.
no its been proven that that wont work, the usb charging cable doesnt have the correct pins for usb inputs, only the usb adapter does
scottrod said:
no its been proven that that wont work, the usb charging cable doesnt have the correct pins for usb inputs, only the usb adapter does
Click to expand...
Click to collapse
;(
I wasted a whole $1.15!
NeoMagus said:
In your emulators settings (I use nesoid, snesoid etc) did you go into Other Settings> and check "Use Input Method" ? It says enable special input device eg bluetooth gamepad.
Click to expand...
Click to collapse
scottrod, did you check this setting?
Has anyone been able to play an SNES Emulator in two-player mode, with two PS3 Six-Axis controllers?
I can make each controller work, but when I map the buttons, they register as the same input for each controller (on the emulator). Basically, I don't see a way to register the D-Pad Up from PS3 controller 1 as something different from D-Pad Up from PS3 controller 2.
I am currently using SNESoid and I connect my controllers via the USB port on the keyboard dock, then disconnect and use them via Bluetooth.
What i'm trying to do is play PC games on my Nexus 4 over WiFi/3G. Which I can successfully do
The hurdle i'm trying to overcome however is getting my PS3 controller (Paired to my Nexus 4) to act as a gamepad on the PC's side
I can successfully pair the PS3 controller and have it emulate mouse/keyboard inputs which is acceptable for keyboard buttons. But trying to use the right analogue stick as a mouse to look around is hopeless
Is there an app which can send gamepad inputs over the network? That way, I can select 'gamepad' in games and everything should work correctly
bump
Hello.
I tried to connect my Xbox 360 wireless controller to the galaxy s2, by connecting the receiver to the otg cable, but it wouldnt work.
I've checked dmesg, and i saw that the phone recognized the wireless receiver but not the controller itself.
When I try to pair them the controller just keeps flashing.
The chances are that you are missing some software that makes the receiver interact with the phone correctly, you'd have more success using a PS4 controller and an app called Sixaxis (I think) from the playstore. It will connect via bluetooth rather than the Xbox RF signal......
Failing that, I've used a Moga Controller in conjunction with epsxe to play PS1 games on my S2.......
http://i.imgur.com/rVnFwJM.jpg
I tried connecting a pendrive, a mouse and a keyboard through an OTG adapter and they all worked fine.
However, I couldn't get my wired xbox 360 controller to work. The device doesn't show any sign that it's trying to detect it.
I also tried connecting a usb SNES-ripoff controller that I had laying around and it actually worked right away, but half of the buttons on it wouldn't get registered on any emulator I tried.
Has anyone managed to properly connect a wired xbox controller to their Redmi Note 2?
i tried to connecting the wireless one (im not have the wired version), and tried this tutorial, and can't get it work. I think its because original kernel not support it, its lack of xpad.ko module.
and im sure the wired one can't work too, because there was not key layout for xbox controller in /system/usr/keylayout/. yeah we can copy it manual, but our kernel not support.
CMIIWsorry for bad english.