Cheapest place to buy more S pen? - AT&T Samsung Galaxy Note I717

I rarely use the S Pen but I lost it, well my 2 years old son did. It just feels weird without it.
So where is the best place to buy a replacement pen? I want OEM or OEM like pen with the same function and fits inside the holder. From my understanding most generic pen won't have the swipe function and won't fit inside the holder.
I wouldn't mind buying 3 or 4 of them at a time if I can get a discount on them. Let's face it, this little plastic DOES NOT cost $35 to make.

Not the cheapest but for $24.95 here you go
White
http://www.cellphone-repair-shop.co...te-stylus-pointing-pen-for-white-color-phone/
Black
http://www.cellphone-repair-shop.co...te-stylus-pointing-pen-for-black-color-phone/

Ebay, I was looking today many under $20 delivered. Just found a few around $17, looks like they are getting cheaper.

FYI these pens arent just plastic, they contain all sorts of circutry and a pressure sensor in the tip that all gets powered by a panel UNDERNEATH the screen.

KosanRio said:
FYI these pens arent just plastic, they contain all sorts of circutry and a pressure sensor in the tip that all gets powered by a panel UNDERNEATH the screen.
Click to expand...
Click to collapse
This. You will need to pay a little extra as it's not really a stylus, it's a Wacom pen

Related

Fosmon Metal Stylus for T-Mobile Touch Pro2 with Ballpoint Pen...will they fit?

I ordered a 3 pack of these bad boys from amazon; $13 shipped for 3 is much better than boxwave's $16 shipped for one...now we need to see if they fit properly!
http://www.amazon.com/Fosmon®-Premium-Quality-T-Mobile-Ballpoint/dp/B003752IWI
I will report back once they arrive =)
Can't guarantee those will, but I CAN guarantee that these will. The ORA Stylus from Expansys-USA and for less than $12 (sans shipping).
Boxwave tried to poo-poo these when I asked how come a single boxwave pen/stylus cost as much as a three-pack of these.
I have the three-pack for my Sprint Touch Pro2. First batch were defective, and even before I said anything Expansys-USA admitted they had sent me defective ones and replaced them.
Never an issue since.
Please write back and say if these fit your Sprint (CDMA) Touch Pro2 and how well they work. Always need new styli.
Did you recieve the stylus yet???
Is it a PERFECT fit?
whoisloon said:
Did you recieve the stylus yet???
Is it a PERFECT fit?
Click to expand...
Click to collapse
I bought a 3 pack. Yes, they fit just like the originals. They are very slightly different when inserted, but it is not noticeable. They work just like the OEM; when I remove the stylus the device unlocks.
yup they fit Tmobile tp2 perfectly and for roughly $4 delivered each boxwave can suck it sideways!
any pics of how they fit externally? you said there is a minimal difference with the OEM stylus..
fosmon fits tp2 just fine
i finally got my 3 pack today. took 2 weeks as the first shipment to me was lost. In short these guys are exactly the same length as the original however the steel barrel is of a smaller diameter. Looks like they simply used a high quality pen cartridge and cut it down to fit, then added the plastic tips at both ends. 3 for $14 I cant *****. I would recom recommend.
Will this stylus fit AT&T Tilt2? Probably it will, just want to be sure
I bought these from Expansys USA and they fit like a charm. Even before I was able to complain that the pens weren't working, I received an email from Expansys USA that they had sent me defective pens and replaced them with no questions asked.
Stylus fits fine. It's a great thing to have a pen when you need one.
Thanks! Needed to know this. Just bought a stylus for my Tmobile TP2, but it was the sprint branded one...lets just say I had to "modify" it to make it work. Now I can get three that look right for less than the $21 shipped that HTC charges for their 3 pack!
Wow, awesome find! Just ordered mine, can't wait...!
Fits my VzW TP2, but...
The Fosman metal stylus fit my VzW TP2, but it initially caused some weird behavior. I have stylus lock engaged so my device will not wake up, etc., with stylus. The device ignored the lock with the Fosman stylus! Finally got it working by unloading and reloading device lock.
Worse still, the ink dried up after only a couple of weeks and literally less than 20 words written. Since that was the only reason to go with the Fosman, I have gone back to the OEM stylus. (Yes, I know I got a 3-pack, but what good is a pen that dries up after a couple of uses?) I should have thought about it -- look how small the barrel is for any ink reservoir ...
Where'd you buy it?
Bully Dawg said:
The Fosman metal stylus fit my VzW TP2, but it initially caused some weird behavior. I have stylus lock engaged so my device will not wake up, etc., with stylus. The device ignored the lock with the Fosman stylus! Finally got it working by unloading and reloading device lock.
Worse still, the ink dried up after only a couple of weeks and literally less than 20 words written. Since that was the only reason to go with the Fosman, I have gone back to the OEM stylus. (Yes, I know I got a 3-pack, but what good is a pen that dries up after a couple of uses?) I should have thought about it -- look how small the barrel is for any ink reservoir ...
Click to expand...
Click to collapse
I bought mine at Expansys-USA and they replaced it saying that they had shipped me a defective set. No questions asked and the new set don't dry up.
I got that same pack on Amazon for 9.99 + 3 for shipping the fit and work great.
http://www.amazon.com/Fosmon®-Premium-Quality-T-Mobile-Ballpoint/dp/B003752IWI
You can also order them from tmobile's site for 9.99 + 6 shipping and taxes.
http://www.t-mobile.com/shop/addons/Accessories/Default.aspx?categorycode=24
Do they fit in the tilt 2?
Just got mine in from Amazon.com for 9.99 + 3 for shipping as well. They fit great and still work w/ stylus sensor and writes well. We'll see how long the ink lasts...
anyone know where i could buy a stylus with ball point for the normal touch pro2 on ebay? because hard to purchase when in in Australia. Thanks
I made my own out of a htc stylus some melted plastic a file and a black paint marker. I just ordered the fosmon one thanx everyone for letting me know this one works.

Accessories for the Jetstream

What accessories exist for the Jetstream?
svetius said:
What accessories exist for the Jetstream?
Click to expand...
Click to collapse
I am not sure, however, after exploring the tablet software a little bit there is an awesome desktop dock application that shows the weather, the htc clock, and facebook updates. So I take it we will see a home dock in the near feature. I wish a car dock would come out, but because of its size and legality of videos playing while driving, we probably won't see one of those.
The only two accessories that I know of are:
HTC Scribe Pen - $80
Anti-Glare Screen Protector @ AT&T - $20
- Dan
Actually, if you go to Amazon and search for HTC Puccini, a tpc case also shows up. No case, though....soon, I hope!
svetius said:
What accessories exist for the Jetstream?
Click to expand...
Click to collapse
For anyone looking for decent case that fits the HTC Jetstream until cases that are made for this product reach the market. I have been using a Targus (Truss Leather Case / Stand) Model Number THZ07002US from Best Buy.
It’s a case that was made to fit an Acer ICONIA TAB A500 10.1 pad. It works as a cover and a stand that has three viewing angles in stand mode. It also has a slot for the styles pen but it’s a little bulky, doesn’t fit as tightly as I would like and it covers the back camera. All that said you can easily reach the on off switch, head phone jack, volume controls and even plug the unit in without taking the pad out of the case.
I still want to buy a case made for my unit that lets me use the back camera and that fits a little better but until they become available I needed some thing to protect my new overpriced but amazing Jetstream.
Looks like PDAir will be making some and rooCASE will have some nice ones ready October 19 on Amazon...they look nice.
scribe pen
is the scribe pen still coming free with the device if its bought in store? thanks
Yes, until October 15...
Pen Issues
I bought the unit in person last week, just before closing on my way home from work. The ATT store did not include the pen with my purchase and I forgot to ask for it. I went back in the am to get it and boy did it get interesting.
They started out with the story that the Pen only was included if you bought the data plan on a 2 year commitment?
I said really? Show me where it says that? I have seen the pen offered in EVERY AD as free with purchase for a limited time.
We went round and round and the finally relented but what a PIA....
ATT is truly clueless when it comes to it's own products, promotions etc.
Love the Jetstream, dont love the hoops you have to jump through.
How about NO ONE knowing when the LTE network is turning on?
Why am I paying for a data plan for something that is not ever available yet and has no timeline?
I passed on the data.
Have unlimited wifi tether on my rooted inspire so that's my dataplan.
Yeah I didnt think they were all coming with pens, hope mine has one with it ><
Didn't have that issue. I am WiFi only and they asked to register me and I said I didn't really need to because I was using it only on WiFi networks. Got the pen nonetheless.
I think you are supposed to have a data plan, but the advertising was hazy....and the ATT rep said without me asking that I got the pen. I really think it depends on the person.
ATT doesn't have good reception in my neck of the woods, so Sprint is my provider. like you, Tracy, I just tether.
Skinomi has screen protectors and skins. There is also a 25% coupon.
www.skinomi.com
Coupon code is skinomi25 plus free shipping.
They are good skins. Apply like Zagg but no orange peel. They are slick.
Case/cover for Jetstream
Picked this case up on Amazon last week.
http://www.amazon.com/HTC-PUCCINI-S...H4TA/ref=sr_1_3?ie=UTF8&qid=1316444249&sr=8-3
For 9.99 was not expecting much....Case is great....Soft and flexibile. Covers the back and all the corners and makes holding easy.
I recommend highly.
Tracy
Has anybody heard about a folio case that allows it to stand up, much like the Xoom case? It's really the only thing I find the device is missing.
Melkco says they are working on one. So does PDAir. RooCASE will have one ready mid-October....you can see the rooCASE on Amazon. PDAir on their own website, and I conducted Melkco on my own....
Looks like we will have to be patient. The gel case on Amazon works well for the time being....
found this new case on ebay - looks good - will order one and see how is it
http://www.ebay.com/itm/Sikai-Mibro...985919?pt=PDA_Accessories&hash=item2eb825e17f
Found this case on the HTC website. It is the official case. I assume it looks just lile the Flyer case..
http://shopamerica.htc.com/product/productpop.htm?prId=39802
Due to being in a rush, i got this case for $70 at WalMart
www.kensington.com/kensington/us/us/p/1615/K39336US/keyfolio™-bluetooth®-keyboard-case.aspx
Had to make some mods such as cutting a big hole for the camera and cutting some of the elastic for clear the volume and power buttons. Also cut some of the front 'frame' so the screen is fully visable.
IMPORTANT: Just be aware the two/three small holes on the top of the Jetstream are light sesons for the flash/camera, so the hole you cut for the camera must be big enough allow light access to those small holes. The BT keyboard works great with it too.
did u get the case?
itzik-g said:
found this new case on ebay - looks good - will order one and see how is it
http://www.ebay.com/itm/Sikai-Mibro...985919?pt=PDA_Accessories&hash=item2eb825e17f[/QUOTE
Did u get the sikai cover? Is it any good?
Click to expand...
Click to collapse
try this ,with free protector
http://www.ebay.co.uk/itm/150685447...47815&_sacat=See-All-Categories&_fvi=1&_rdc=1
I saw that yesterday. It also comes in pink but I would prefer a case that has a place for the scribe pen....:-\

Cases

If you have or found a good case, post it here.
I bought the official case from TMO. It's a little pricey but provides excellent protection. As a matter of fact, the faucet in my bathroom leaks and I left my tablet on the counter one night. I woke the next morning and my tablet was sitting in a puddle of water that extended halfway up the case. Took the case off, wiped everything down, and plugged it back in. Worked fine. Even the liquid indicator was still white.
hiko36 said:
I bought the official case from TMO. It's a little pricey but provides excellent protection. As a matter of fact, the faucet in my bathroom leaks and I left my tablet on the counter one night. I woke the next morning and my tablet was sitting in a puddle of water that extended halfway up the case. Took the case off, wiped everything down, and plugged it back in. Worked fine. Even the liquid indicator was still white.
Click to expand...
Click to collapse
Ditto on the TMO case.. seems $20 too high, but honestly a pretty good hunk of hardware for your tablet. I will have one spare once I have my tablet mounted into my car dash..
Raichean said:
Ditto on the TMO case.. seems $20 too high, but honestly a pretty good hunk of hardware for your tablet. I will have one spare once I have my tablet mounted into my car dash..
Click to expand...
Click to collapse
Another vote for the TMo case and you are right about the price but you can buy it off Ebay for about $20 less unless you are like me and want it right now.
Can anyone pls post a picture/link to this TMo case?
Would like to know how it looks, whats the price and where to get it.. thanks
Klacik said:
Can anyone pls post a picture/link to this TMo case?
Would like to know how it looks, whats the price and where to get it.. thanks
Click to expand...
Click to collapse
The brand is Incipio and I purchased mine from a TMo store for like $50. I had seen the same one on Ebay for half the price but I didn't want to wait. I checked Ebay and the case is no longer listed. I also looked on the Incipio web site and they don't even list it. I don't have a picture but the case is black and the tablet kind of snaps down into the bottom part of the case. You can open the case(it is held closed with an elastic strap) and you have three positions that the tablet can be set into. They range from a fairly good tilt to darn near upright. I have found the case to be quite nice and it really doesn't add much to the overall size. Hope this helps.
Klacik said:
Can anyone pls post a picture/link to this TMo case?
Would like to know how it looks, whats the price and where to get it.. thanks
Click to expand...
Click to collapse
h ttp://img834.imageshack.us/slideshow/webplayer.php?id=img4704b.jpg
Pictures attached.
On the second picture, you can see bubbles in the microfiber. That's the glue separating because I got it wet.
I bought on ebay a smart cover like this from the auction 170821966479. It's thin, good protection and a good stand. I am very happy with it.
The TMO case is so popular in the US, but outside there are two options: universal 7 inch case or a not so bad case designed for the media pad. Search for t-mobile springboard case on ebay.
I bought a cheap-o case off eBay for $16. Listing was questionable as the sellers account was terminated the day after I bought it. I still got the case this morning after 3 weeks though. 2 problems with it. It's a little too thing for the springboard, so the outside edge around the display doesn't quit fold over all the way and sticks up. Secondly, the hole for the front facing camera is slightly off and the camera just barely peeks out from it.
Might not stick with the case though. Without the case I've always been able to stick it in my back pocket (slacks or jeans) and walk around with it to a few places, lunch breaks, dog walks, etc. With the case its a no go.
PDair Leather Case
lilaliend said:
I bought a cheap-o case off eBay for $16. Listing was questionable as the sellers account was terminated the day after I bought it. I still got the case this morning after 3 weeks though. 2 problems with it. It's a little too thing for the springboard, so the outside edge around the display doesn't quit fold over all the way and sticks up. Secondly, the hole for the front facing camera is slightly off and the camera just barely peeks out from it.
Click to expand...
Click to collapse
Yes, I have also found this one on eBay. I have ordered it (the same colour like lilaliend). But it never arrived (I got my money back). Fortunatelly!!
After the first attempt with eBay, I have decided to invest a bit more money and ordered a leather case from PDair:
qqq.pdair.com/index.php/ebook-reader-tablet/huawei/huawei-mediapad/leather-case-for-huawei-mediapad-book-type-black.htmk
(in the URL please replace qqq with www and htmk with html)
You can buy it directly from PDair for $80. This is quite a lot of money. But PDair's reseller for Middle East sells the same case ("book type") for $60:
tbeyond.com/leather-case-for-huawei-mediapad-book-type-black-p-14363.htmk
(in the URL please replace htmk with html)
Free Worldwide Shipping. Even though the reseller is based in United Arab Emirates, the case came from Hong Kong. Delivery to Germany was without any problems.
My experience with the case from PDair: The case is simply excellent. I highly recommend it. It is worth the money:
PROS:
- durable black leather
- magnets! It closes with magnets
- the tablet fits nicely into the case (in contrast to the cheap case from eBay - see post from lilaliend)
- all holes (front and rear cameras, USB and HDMI ports, charger) are precisely where they should be
CONS:
- the case is rather thick. They use multiple layers of leather (you can see it on the pictures on the PDair website). So the tablet is really well protected. But with the case you can not put the tablet into your back pocket...
TMobile Incipio case for Springboard has dropped in price
If you were to shop for it now on the TMobile site the Incipio case is now $29. That's about $15 to maybe $20 cheaper than when I bought it earlier in the year. ARGH!
I do love my case though. The only thing that's bad is when you are in portrait mode and the front cover doesn't sit nicely back when holding it in that position.
Marware Jurni
I wanted a case that had a zippered closure, for added protection. I had this case from when I had purchased the Kindle Fire. But I decided to see if it would fit the Springpad. It does, with a bit of sanding or cutting.
This is an option if you are willing to sand down or cut two nibs from the top two clips. Each clip has two nibs, the one you want to sand down or cut is the one on the right for each clip. I have attached some pictures so you can see the zippered case and the two clips above, and a close up of the cut. Mine is a bit sloppy, but hey, I'm not complaining. See pictures.
ting-er said:
I bought on ebay a smart cover like this from the auction 170821966479. It's thin, good protection and a good stand. I am very happy with it.
Click to expand...
Click to collapse
I also looking for this case.. anyone know where can i get it that shipped internationally...
The incipio one is also looks nice.. but i couldnt found one in ebay
Sent from my GT-I9300 using Tapatalk 2
Great... I am happy with my incipio but I got this off ebay because it would be nice to prop it in portrait mode. I guess I could report how well it does when it comes.
http://www.ebay.com/itm/Brown-Magic...7-SLIM-MediaPad-SPRINGBOARD?item=270998785548
this is my combo "temporary" case and universal stand. :laugh:
still looking for a folio-type case and I just got news that the local distributor here already has stocks and giving it for free for new buyers of MediaPad. :silly:
I wanted a case that protects the corners, could prop up the MediaPad in landscape and (!) did not cover the front (like some cases that cover the bezel around the display).
Turns out that this case for the Lenovo Ideapad A1 fits just fine. Only the hole for the camera is in the wrong place, but I don't use the Pad's camera anyway. Nice sleek design. Reeks of plastic/glue the first few days, but the smell wears off quickly and then you have a smart-looking case for your MediaPad.
Apparently this case comes with different names around the globe. Have a look at the pictures and see what's available in your country.
Hi
I'm using the EasyAcc Case for nearly a year now.
It fits great, exept the hole for the frontcamera could be a milimeter bigger.
I do not know, in it is available outside Germany.
Greets
Torstiko
Sent from my Huawei MediaPad using xda app-developers app

Choosing a stylus

Hi
I've tried a few cheap styli and not been that impressed, bought a low cost one off amazon which had a weird chiselled angled bit and was unusable (I was so disappointed).
The next one I have tried was from the pound shop! Works OK actually but not very precise, it has a squashy rounded edge.
I think I'd like to spend up to maybe a few pounds... will let you know...
Unfortunately, I have yet to find a capacitive stylus that doesn't have the big rounded end on it. I picked up a pair of cheapos off of Amazon for about seven dollars each last year, and while mine kinda fell apart (The tip was just held on with surface pressure - a little super glue fixed that), my girlfriend's has survived all the better. Plus they double as ballpoint pens, which is kind of nice - one piece of equipment, two functions.
I've been looking into getting a replacement stylus for myself, one that's longer and more like a traditional pen (the short squat ones are a little odd for me). However, none of them have a pen-like pointing tip. All of them are the rounded rubber fingertip-style tip.
Anyone else found a pen-like tip stylus ? I did some googling and found that the nice special narrow-point S-Pen for the Samsung Note won't work with standard devices like the S2 or the HTC Amaze (which sucks, because it's a good-looking tip).
That's interesting - I wonder how the stylus on the Samsung works, is there something different about the screen to recognise that stylus?
From what I read, there's another electromagnetic layer in the digitizer that allows for that stylus to work in a pressure environment - the longer / harder you press, the more "ink" shows on the screen, kind of like when you press harder with a pencil - the wider and darker the line.
Plus, from what I read, it isn't really capacitive, since it doesn't work on other tablets / phones, which sucks. I would love a fine(r)-tip stylus.
thx for that -
sounds like a cross between an [old fashioned?] resistive screen and a capacitive one!
I have the tried the Targus, the Bamboo, and the Samsung model for the Galaxy Tab line. The Bamboo has a good shape and is only slightly heavier than the Targus model. Samsung is the heaviest and is balanced more the way a writing instrument/heavy ball point pen would be.
I don't think the tips are really all that different though. If price is an issue and you don't like the Targus style/look, I'd say go with the Samsung. It's around $20 on Amazon while the Bamboo will cost you $30. They both definitely feel more like writing/drawing tools, and because of that they are somewhat better at making marks.
On the other hand, there is no lack of do it yourself options out there.
thx! totally cool, want to make my own now!

Spigen bounce and GN3 screen protector

Just put in the order for $21 change....
i know i will not be happy with the case....really looking forward some good clear bumpers.....
the only problem is how do you make such a big ass phone less bulky....
and if you are going to add bulk...how to make it look classy?
http://www.amazon.com/SPIGEN-Samsun...=1-6&keywords=spigen+note+3&tag=s601000020-20
http://www.amazon.com/Samsung-Prote...DD5TUZ0/ref=pd_bxgy_e_img_y&tag=s601000020-20
Huh?
Sent from my DROID RAZR using xda app-developers app
Ordered Bounce and Ultra-Crystal also. Only brand name case I could get before phone arrives.
Anyone have past experience with Bounce models?
I love the ultra-Crystal and Ultra-oleophobic from Spigen. Have used on all my phones since Captivate.
¢ via my interim device KFHD
I also ordered the Bounce case (it shipped today) and the crystal screen protectors. The Bounce case looked to be the best combination of value, looks, light weight, and protection. I'll report back on their performance once I've got everything (The screen protectors are the only item I've gotten so far)
I wonder how the buttons will work. I hope that the "feeling: that you are pressing the button remains..
mdalacu said:
I wonder how the buttons will work. I hope that the "feeling: that you are pressing the button remains..
Click to expand...
Click to collapse
My wife has a TPU for her HTC one and access to the buttons suck!
the bounce looks like a very light weight skin....no additional protection except the fact that it will help avoid getting your phone dinged!
I'm sure once the phone is officially out we'll be getting better cases...patience is not a virtue
OP, if you're looking at Spigen, I like the looks of this one...
http://www.amazon.com/gp/product/B00DCIZJEY/ref=ox_sc_act_title_4?ie=UTF8&psc=1&smid=A2SFKRF5TPZMT5
Looks a little more classy than the one you linked (in my opinion)
Bah, they dropped the prices on the neo hybrid by $10. I'd have considered it at that price Oh well, the Bounce looks great. I'll know in a few days for sure
Spigen is really all over the road on their pricing. First the $1 promo on select items, then they jumped to $29.99, then $34.99, now down to $24.99 its fine to lower the price but they better fix the ones they charged and haven't shipped and perhaps fix those that just shipped as well. It would be good for customer relations.
RaptorMD said:
Spigen is really all over the road on their pricing. First the $1 promo on select items, then they jumped to $29.99, then $34.99, now down to $24.99 its fine to lower the price but they better fix the ones they charged and haven't shipped and perhaps fix those that just shipped as well. It would be good for customer relations.
Click to expand...
Click to collapse
I purchased it at 35.00. Kinda pissed its 25.00 now....
SgtGoldy said:
I purchased it at 35.00. Kinda pissed its 25.00 now....
Click to expand...
Click to collapse
some ****ty tactics by Spigen...guess I got what i want for now...
I think what i really want is a black Spigen slim Armor view.
SgtGoldy said:
I purchased it at 35.00. Kinda pissed its 25.00 now....
Click to expand...
Click to collapse
I would encourage you to make it known via email to them, and get a refund on the difference, clearly someone is messing it up and its going to cost them sales.
goababa said:
some ****ty tactics by Spigen...guess I got what i want for now...
I think what i really want is a black Spigen slim Armor view.
Click to expand...
Click to collapse
Finally on their FB page they are saying if you want one to let them know. They are gauging interest, that what I read in the thread/poll about that case. Since they cannot commit to one I am looking at this instead http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSF2SSGT3K-DG Sedio Ledger with metal kickstand. Has magnetic closure and big S-View window. The price is right, I just wish they offered some better color options, but I might get the red/grey combo for some flash.
RaptorMD said:
Finally on their FB page they are saying if you want one to let them know. They are gauging interest, that what I read in the thread/poll about that case. Since they cannot commit to one I am looking at this instead http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSF2SSGT3K-DG Sedio Ledger with metal kickstand. Has magnetic closure and big S-View window. The price is right, I just wish they offered some better color options, but I might get the red/grey combo for some flash.
Click to expand...
Click to collapse
This looks phenomenal. Just wish it was a bit cheaper. For those who have used flip covers in the past how do you feel about them compared to regular cases? I just ordered the neo hybrid as my first note 3 case and currently have a Seidio active on my note 2 which I like(although it's a bit bulky). But I'm thinking about trying the above Seidio Ledger case when it is released. My biggest concern is it becoming a nuisance with the extra flap hanging around, especially when taking pictures or attempting to use with one hand. Thoughts? Experiences?
I had the Slim Armor View on the GS4 and I didn't find it intrusive at all, I simply flipped the cover back and used the phone as if it wasn't there. The Ledge from Seidio looks to be the same. Obviously when using the camera you won't want the cover folded back even if it does line up, the extra plastic in between the image and the lens will likely cause for crappy images.
Still its a small price to pay for full protection and a view window.
RaptorMD said:
I had the Slim Armor View on the GS4 and I didn't find it intrusive at all, I simply flipped the cover back and used the phone as if it wasn't there. The Ledge from Seidio looks to be the same. Obviously when using the camera you won't want the cover folded back even if it does line up, the extra plastic in between the image and the lens will likely cause for crappy images.
Still its a small price to pay for full protection and a view window.
Click to expand...
Click to collapse
Thanks for the info. I will likely give the Ledger a shot when it releases
I got two SPIGEN Samsung Galaxy Note 3 Case Protective Slim Fit Dual Protection Cover for Galaxy Note III below for $2 lol I thought it wa a accident as they were priced so low. Then they went up to 24.99! I should of bought 10 lol
http://www.amazon.com/SPIGEN-Samsun...&qid=1380702218&sr=1-4&keywords=spigen+note+3
Received the Bounce from Spigen the other day and without phone inside it fits my Seidio Active holster from the Note 2 very well. The top half of the holster that the screen faces doesn't appear to be wide enough to protect it edge to edge, but sold my Note 2 on 8/31 so I cannot compare.
Yes, I am one of those that uses a holster. At work only though.
I am 6' 3" and 240lbs so I tell myself it doesn't look as obvious, but my wife and kids say otherwise
bluetoothless said:
Received the Bounce from Spigen the other day and without phone inside it fits my Seidio Active holster from the Note 2 very well. The top half of the holster that the screen faces doesn't appear to be wide enough to protect it edge to edge, but sold my Note 2 on 8/31 so I cannot compare.
Yes, I am one of those that uses a holster. At work only though.
I am 6' 3" and 240lbs so I tell myself it doesn't look as obvious, but my wife and kids say otherwise
Click to expand...
Click to collapse
Seidio should have the Surface and holser friday . Have a couple hybrid Spigens now but I need my surface case and holster. I just don't want to pay the initial price. They will be half price in 6 months.
Sent from my Note 3 using Tapatalk 2
I have the bounce and it compliments the phone very well. And it looks classy to me. Gives me a good grip too. I am actually preferring it over my sview for now.

Categories

Resources