MIUI 2.4.6 ICS
This is a port from the ARC S based on the Official Sony ICS Beta
Kernel is working on [email protected] by default. Use SetCPU or CPU Master if you want to change it.
You can use Inteks and Night-Elf kernels for ICS too.
Works: Everything
Known issues:
- you can find some freezes if you use SmartAss or SmartAss2. Use Ondemand Governor
- Neo users may find too much green on the photo. I can't find right fix for that. I have one with correct photo, but flash doesn't work on it. (Fixed with camera fix)
Kernel is inside of the archive.
ROM Download: http://www.mediafire.com/?8cl3wq0b2lk0de4
Camera fix: (Everything works fine now)
NEO V only: camera fix for NEO V
NEO only: Install camera fix for NEO V 1st and only then install Camera fix for NEO (it's important)
How to install:
- Bootloader must be unlocked.
- Phone with .62 FW on it.
- Copy .zip with ROM to your SD-card
- Copy .zip camra fix if you use NEO V
- Unzip boot.img file from the ROM to the any folder on your HDD and flash boot with fastboot.exe or FlashTool
- reboot and enter to CWM
- Make all wipes (wipe data/factory reset, wipe cache, wipe dalvik cache)
- Install ROM via Install zip from SD-card command.
- Install fix camera for NEO V if you need the same way
- Reboot.
Sorry for my poor English.
To Admins: I miss that Mr.ZduneX25 is already post same ROM. I'm sorry for the double-posting. Delete it if you wish as I can't
But the voicesearch is fixed in this ROM In contrast to ZduneX25's ROM
Thanks for the efforts buddy...rom working fine...but the kernel in the archive is unusable for me...anyways...thanks again and keep us updated.
Sent from my MT15i using XDA
any fix for the neo(mt15i) camera thaaaaaaaaaanx man
innocence07 said:
any fix for the neo(mt15i) camera thaaaaaaaaaanx man
Click to expand...
Click to collapse
May be u can get it on zdune's thread.
Sent from my MT11i using XDA
Fix for camera will be shortly in a first post.
Any screenshot?
Donmitsos said:
Any screenshot?
Click to expand...
Click to collapse
You can find same screenshots here
How to install:
- Bootloader must be unlocked.
- Phone with .62 FW on it.
- Copy .zip with ROM to your SD-card
- Copy .zip camra fix if you use NEO V
- Unzip boot.img file from the ROM to the any folder on your HDD and flash boot with fastboot.exe or FlashTool
- reboot and enter to CWM
- Make all wipes (wipe data/factory reset, wipe cache, wipe dalvik cache)
- Install ROM via Install zip from SD-card command.
- Install fix camera for NEO V if you need the same way
- Reboot.
Click to expand...
Click to collapse
I have bootloader unlocked and cwm installed. Do I still need to follow "- Unzip boot.img file from the ROM to the any folder on your HDD and flash boot with fastboot.exe or FlashTool"
On all my other phones, I copy the flash, boot into recovery and apply the install zip.
sly.cooper said:
I have bootloader unlocked and cwm installed. Do I still need to follow "- Unzip boot.img file from the ROM to the any folder on your HDD and flash boot with fastboot.exe or FlashTool"
On all my other phones, I copy the flash, boot into recovery and apply the install zip.
Click to expand...
Click to collapse
Yap> you are still need to flash it manually. As CWM does't flash kernels on SE XPERIA phones.
@MaxWorks - Thanks. Is that the same procedure for all the ROM's? I read instructions for KA13-Ice-Creame-Sony ROM and it does not have same step. Just want to make sure that I am following correct steps. This is my first custom ROM install on Xperia Neo V.
sly.cooper said:
@MaxWorks - Thanks. Is that the same procedure for all the ROM's? I read instructions for KA13-Ice-Creame-Sony ROM and it does not have same step. Just want to make sure that I am following correct steps. This is my first custom ROM install on Xperia Neo V.
Click to expand...
Click to collapse
Yes. everytime the same steps. Only kernels will change.
** SOS **
I flashed the kernel using fastboot and restarted my phone using "fastboot reboot". My phone is not going into recovery and nothing is coming on the screen. The screen is blank but ON. How do I recover?
sly.cooper said:
** SOS **
I flashed the kernel using fastboot and restarted my phone using "fastboot reboot". My phone is not going into recovery and nothing is coming on the screen. The screen is blank but ON. How do I recover?
Click to expand...
Click to collapse
pull out the battery, put it back in, dont connect to the pc
power on, as soon as you see SONY, start pressing volume down button and u'll enter recovery
@Aarush - I had tried that but no luck. Infact it was not showing the Sony logo. I had flashed it again to .42 via flashtool. Is this process worked for anyone?
sly.cooper said:
@Aarush - I had tried that but no luck. Infact it was not showing the Sony logo. I had flashed it again to .42 via flashtool. Is this process worked for anyone?
Click to expand...
Click to collapse
try another kernel - Inteks or night-elf RC2
I finally managed to install the ROM. Here are few observations:
1. The ROM had default language as Chinese. It took me some time to figure out settings -> Language to change the language
2. There are still some apps or settings in Chinese. Is it possible to get full English version?
3. The ROM feels bit laggy. I had tried MIUI on HTC sensation and Moto Defy and the experience was smooth and fast. Is there any way I can tweak the performance?
Thank for the ROM
sly.cooper said:
Is there any way I can tweak the performance?Thank for the ROM
Click to expand...
Click to collapse
1. Governor must be ondemand - smartass and smartassv2 is very buggy on this rom
2. Try to install Supercharger script
3. Disable icon shadows
4. Disable windows animation
all these steps will increase your performance
New version will be at fri-sut
How do I change the Governor settings? I will look for supercharger script.
@MaxWorks
On a side not - Firewall (based on icon), Data Usage and Wallet (?) apps are still in Chinese. Will it be possible to get all in English. Thanks and appreciate all your work.
sly.cooper said:
How do I change the Governor settings? I will look for supercharger script.
@MaxWorks
On a side not - Firewall (based on icon), Data Usage and Wallet (?) apps are still in Chinese. Will it be possible to get all in English. Thanks and appreciate all your work.
Click to expand...
Click to collapse
for governor and cpu frequency you can use SetCPU or CPU Master app
Translation program is not perfect, so it take time to translate all. I hope will be better in a future versions.
Everything very good!!!
Just eliminate the chinese completely and this is the best MIUI port for Neo /V
Sent from my MT15i using xda premium
Related
I have a week trying to install a new ROM to my phone (xperia mini pro). I follow the instructions, install the recommended kernel for each Rom. When i finish installing the ROM i reboot the phone put the kernel logo and don't do anything else (the last time i let it in the kernel logo for 10 hours and it didn't work).
I fix it using Wotan server. But what i really care about is that i want to prove new Rom, so if someone can help me i will be really thankful.
PS: Sorry if you think my english is bad, is because my main language is not english
rivezu said:
I have a week trying to install a new ROM to my phone (xperia mini pro). I follow the instructions, install the recommended kernel for each Rom. When i finish installing the ROM i reboot the phone put the kernel logo and don't do anything else (the last time i let it in the kernel logo for 10 hours and it didn't work).
I fix it using Wotan server. But what i really care about is that i want to prove new Rom, so if someone can help me i will be really thankful.
PS: Sorry if you think my english is bad, is because my main language is not english
Click to expand...
Click to collapse
Did u unlock your bootloader ??
faru123 said:
Did u unlock your bootloader ??
Click to expand...
Click to collapse
Yes it was with cwm, unlocked bootloader and rooted.
flash the proper kernel for you device and always format/factory reset before installing ROM
singh_dd93 said:
flash the proper kernel for you device and always format/factory reset before installing ROM
Click to expand...
Click to collapse
I install the kernel recommended for each ROM every time i try to install a ROM. And i do all the wipes available in CWM.
What phone and what ROM are you trying to install?
Sent from my Xperia Live using xda premium
Phone: Xperia mini pro (sk17)
ROMS: -Nerodroid
-Hybrom
With both ROMS happend the same
i have some problem use nero rom to..
Flash stock ftf using Flashtool and then flash Xkernel to use nerodroid rom
Sent from my Xperia Mini using XDA
Hello,
I'm having the same problem, I don't get it at all. I bought my Xperia Mini Pro (SK17i) yesterday and so far I have been only able to flash stock rom and MiniCMSandwich AOSP Android 4.0.4 RC3, both of which work fine.
With all other roms I get stuck on the logo (depending on kernel - Sony, Sony Ericsson or Free Xperia logo). I do full wipe, dalvik cache etc. but nothing helps.
So far I tried: FXP 117 7.2.0, FXP 117 9.0.0 and XROM™ ICS RC7.
I tried different basebands, flashing in different order etc., no matter what I get stuck on the logo.
Could someone post a detailed step-by-step instruction how to flash either FXP or the XROM on the Mini Pro? Which baseband should I use (and how do I know it's the baseband's fault when the rom doesn't work), what about Wi-Fi etc.
I flashed Galaxy S+ (I9001) before and didn't have any of these issues.
aidennwitz said:
Hello,
I'm having the same problem, I don't get it at all. I bought my Xperia Mini Pro (SK17i) yesterday and so far I have been only able to flash stock rom and MiniCMSandwich AOSP Android 4.0.4 RC3, both of which work fine.
With all other roms I get stuck on the logo (depending on kernel - Sony, Sony Ericsson or Free Xperia logo). I do full wipe, dalvik cache etc. but nothing helps.
So far I tried: FXP 117 7.2.0, FXP 117 9.0.0 and XROM™ ICS RC7.
I tried different basebands, flashing in different order etc., no matter what I get stuck on the logo.
Could someone post a detailed step-by-step instruction how to flash either FXP or the XROM on the Mini Pro? Which baseband should I use (and how do I know it's the baseband's fault when the rom doesn't work), what about Wi-Fi etc.
I flashed Galaxy S+ (I9001) before and didn't have any of these issues.
Click to expand...
Click to collapse
use baseband 64, with baseband 70 people are complaining about battery drain problems
guide for installing cm7 is on original thread
here:
http://forum.xda-developers.com/showpost.php?p=16822393&postcount=3
I do exactly as it says. I had to flash stock rom before that, because update zip wouldn't work if I started from AOSP (or if I wanted to apply it after flashing FXP)
BTW, do I really have to flash stock ftf (kernel+baseband), which overwrites my CWM each time I want to flash FXP? I hate losing CWM.
Anyway, I did this:
1. I put the update.zip on the sdcard
2. I flashed the boot.img I unpacked from the update.zip using fastboot (went fine)
3. I applied update.zip using CWM
4. I did factory reset from CWM and wiped dalvik cache
After reboot - it hangs on the Free Xperia logo. I also tried flashing Rage kernel 2.8 with the same result. Oh, and does it matter if I flash kernel before or after the rom?
aidennwitz said:
I do exactly as it says. I had to flash stock rom before that, because update zip wouldn't work if I started from AOSP (or if I wanted to apply it after flashing FXP)
BTW, do I really have to flash stock ftf (kernel+baseband), which overwrites my CWM each time I want to flash FXP? I hate losing CWM.
Anyway, I did this:
1. I put the update.zip on the sdcard
2. I flashed the boot.img I unpacked from the update.zip using fastboot (went fine)
3. I applied update.zip using CWM
4. I did factory reset from CWM and wiped dalvik cache
After reboot - it hangs on the Free Xperia logo. I also tried flashing Rage kernel 2.8 with the same result. Oh, and does it matter if I flash kernel before or after the rom?
Click to expand...
Click to collapse
rage kernel is not compatible with cm7,
mostly kernel is flashed before the rom, but either way should work i guess..
try formatting system in cwm> mounts and storage
gandhar said:
try formatting system in cwm> mounts and storage
Click to expand...
Click to collapse
Before or after flashing the rom?
aidennwitz said:
Before or after flashing the rom?
Click to expand...
Click to collapse
before
.
edit:flash kernel before
This time I started from Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf (Baseband 56) flashed using Flashtool
1. Root (DooMLorD zergRush v4)
2. CWM (SE Extreme Tweak Installer 1.8)
3. Flashed XperiaMiniPro_4.0.2.A.0.62_SK17.ftf (baseband 64) using Flashtool
4. Extracted boot.img from FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip
5. Flashed boot.img with fastboot
6. Formatted /system in CWM
7. Tried to install FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip in CWM
Failed with Status 7 error (assert failed, something about matching strings containing SK17i and mango).
aidennwitz said:
This time I started from Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf (Baseband 56) flashed using Flashtool
1. Root (DooMLorD zergRush v4)
2. CWM (SE Extreme Tweak Installer 1.8)
3. Flashed XperiaMiniPro_4.0.2.A.0.62_SK17.ftf (baseband 64) using Flashtool
4. Extracted boot.img from FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip
5. Flashed boot.img with fastboot
6. Formatted /system in CWM
7. Tried to install FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip in CWM
Failed with Status 7 error (assert failed, something about matching strings containing SK17i and mango).
Click to expand...
Click to collapse
often the kernel is broken on CM threads, TRY the kernel from this thred..
don't go over all that, just install this kernel, then install update zip from cm7..
no need to flash original ftf
gandhar said:
often the kernel is broken on CM threads, TRY the kernel from this thred..
don't go over all that, just install this kernel, then install update zip from cm7..
no need to flash original ftf
Click to expand...
Click to collapse
Which kernel?
PS. Thanks for helping me.
aidennwitz said:
This time I started from Xperia MiniPro (SK17i)_4.0.2.A.0.42_HU.ftf (Baseband 56) flashed using Flashtool
1. Root (DooMLorD zergRush v4)
2. CWM (SE Extreme Tweak Installer 1.8)
3. Flashed XperiaMiniPro_4.0.2.A.0.62_SK17.ftf (baseband 64) using Flashtool
4. Extracted boot.img from FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip
5. Flashed boot.img with fastboot
6. Formatted /system in CWM
7. Tried to install FXP117_update-cm-7.2.0-RC1-mango-UNOFFICIAL-signed.zip in CWM
Failed with Status 7 error (assert failed, something about matching strings containing SK17i and mango).
Click to expand...
Click to collapse
That's because for some stupid reason you formatted the system partition, which must not be done on some ROM installations.
The CM7 installation requires info from the system folder, but since you formatted it, you don't have the info on your phone and installation cannot be installed.
Reinstall stock firmware, follow the same procedure, but do NOT format system, but do make factory reset, wipe cache and dalvik cache.
Well, I was asked to try formatting /system.
Ok, again then. BTW, is there a pre-rooted .62 stock rom somewhere? I only see .69, which isn't good AFAIK.
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
djRemov said:
Hi, After flashing NeroICSv2, my touch screen stopped working. 5 day tried different methods to ST15i, does not work.
Please help me!
Click to expand...
Click to collapse
is it mini or live with walkman & also NeroICS v2 only support Mini Pro..... sorry buddy!!!! yhu gonna need to use flashtool to flash yur phone.
Sent from my Mini Pro using XDA Premium
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Somyab said:
I think ur touch is gone now..hope flashtool would recover.but i dont think so by reviews of members
U can check solution here
http://forum.xda-developers.com/showthread.php?t=1713449
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Check that topic, try the solutions posted there.
I sent mine to service already, ROM testing killed the touchscreen.
Problem solved!
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
neocyke said:
djRemov dude, where'd you get that touch flashfile? You made it yourself or is someone developing it? I fixed mine using the Hybrom v12 > Hybroman v12 way (without the file) and it still worked. Just curious..
I dug the hybrom zip and found the exact same hex files on it. Was thinking whether the just the script would work on it's own without flashing the minipro hybrom since they're doing essentially the same thing..
Thx dude
** oh yeah, not gonna test that theory anytime soon. I love my phone when it works~! LoL
Click to expand...
Click to collapse
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Do you guys have a link for the Mini Pro ROM? I'm desperate now.. =(
I still have a HYBROMAN v16 do you think that would work?
EDIT: I was able to download HYBROM_V12 but CWM keeps saying that the file is bad. Downloaded and re downloaded at least 10x now.. Any ideas?
UPDATE: For those who are having problems with their touchscreen, this method works! (finally found a working version of hybrom_v12)
@djRemov: You are a god!
djRemov said:
I made myself.
At first I wanted to copy a SYS from another phone, but wondered, and concluded that the MINI PRO ROM has changed about the path to the touch screen files in the SYS . Renaming touch_coconut_tpk.hex in touch_mango_....hex, and replaced by one file in the folder firmware.
Click to expand...
Click to collapse
Lemme see if I understand this right. Basically, what it does is overwrite the hex file and starts the touchscreen script? In which case it continues from the hybrom flash and replaces the hex from the minipro with the lww one?
WT19i Touchscreen Issue Solved
Solution
Follow these steps.
1) First you need to download and copy these two ROM zip files to your SD Card. The download links are given below.
a) (Note: Add (https) then //) before you enter the address which is given below in the address bar for downloading the file.)
|
V
dl.dropbox.com/u/61884099/hybrom_v10.zip
b) (Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?32i7l0w4hpfzx81
2) Switch Off your phone and flash the latest GB Stock Firmware (GB !4.0.2.A.0.62) by using Flash Tool.
You will get this Stock Firmware from here. If you have already downloaded the file, skip this download.
(Note: Add (www) then (.) before you enter the address which is given below in the address bar for downloading the file.)
|
V
mediafire.com/?ervpg54922b9c0p
3) Switch on by connecting usb cable to your computer by press and hold the volume up button on your mobile for Fastboot mode . Download and extract the kernel file which i attached with this post
(kernel_coconut-v4.zip) and flash it via Fastboot Mode in Flash Tool.
4) Switch on your mobile and press the volume down button to enter the CWM Menu and do these things.
a) wipe data/factory reset
b) wipe cache partiton
c) wipe Dalvik Cache
5) After that Do 'Install zip from sdcard' and select hybrom_v10.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
6) When the installation complete, restart your phone. You will see that your touch is partially working !! Don't waste your time by checking
Touchscreen. Switch off your mobile by remove the battery and put it again.
7) Switch on your mobile and boot into CWM Mode again. Don't do these things(wipe data/factory reset, wipe cache partiton and wipe Dalvik
Cache) again for installing new zip from SDCard. (I'll tell the reason later )
Do 'Install zip from sdcard' and select hybroman_v12.zip file from your sdcard which you downloaded and copied to your SDCard
earlier.
8) After the Installation restart your phone and wait for booting into new ROM hybrom v12. Now you can see that your Touchscreen Issue is
solved !!!! :laugh:
Optional:
If you are facing wifi problem just flash the zip file via CWM (coconut_wlan_v4.zip) which is atteched with this post.
If you are not satisfied with hyvrom v12, you can also flash again the Stock Firmware or any other ROM which only supported by LWW
Cheers and Don't forget to hit the THANKS. Sorry for my bad English
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
So sad, i did but my lww still dont work, only power+walkman+home+volume buttons work.
are there any other ways to fix that problems.
and pls share hybrom_V12 for minipro. i can't search it. so i did with v10.
lww screen cant use
not work master,, any solution for me,,??
please help me master,,
djRemov said:
This is not working, I ran сalibrate.but, rewriting touch_smiltron_sony on touch_coconut_tpk.Hybrom_v10 does not work.
I do not want to pass to the service center, because I know that there are men of genius, and I hope that soon my problem will be solved.
Click to expand...
Click to collapse
:good:
Touch Screen Not Working SK17i
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Dear Buddy tried your method as well but still no success ????????
non of the solutions seemed to work, maybe we're facing a hardware problem
ironhide3.2 said:
non of the solutions seemed to work, maybe we're facing a hardware problem
Click to expand...
Click to collapse
try this its working .. i have been tested it twice:good::good::good::good::good::good::good:
Things we need:
Flash tools
Rage kernel gb
Stock .62 firmware for your device(ftf)
wrong rom that bricked your touchscreen
What should we do:
1:flash your device gb .62 firmware
2:flash rage kernel
3:flash that wrong rom again
4:if wrong rom was ics,rom will not boot then remove the battery to turn phone off then flash .62 firmware again if it was gb,do the same work
5:wait until stock rom boots the touch will be fixed
6:if touch screen fixed,press thanks button
djRemov said:
1)Install lastest firmware .62 for wt19i - use Flashtool
2) Install Rage Kernel 2.6 - use Flashtool
3) Then via CM from zip install hybrom_v12. for mini pro
3) Install "Touchscreen.zip" via CWM and reboot system
(Touch screens has to work)
4) Then again flash hybroman_v12 for wt19i
Good luck!!!
Click to expand...
Click to collapse
Can i use this touchscreen.zip for my st15i with the same prob???
First thing that I must to say is "disclaimer":
Everything that is not originally maded by Sony is custom thing, so everything from here is modified Sony files and these files is "custom files"! So before you go to play with these modified files keep in mind that everything from here is custom thing and you installing these things on your own risk! I no want and I will not be responsible if something go wrong, if you lost your private data, if your device can not boot ...etc...etc, you doing everything on your own risk!!! If you no want to risk than skip this thread!!!
Download v13 rom (Firmware 6.1.1.B.1.10 ):
http://d-h.st/Qyc
MD5: 8e39c55f673183545416ab54cf2e3c66
For some one who have problems with usb drivers:
http://d-h.st/Zqo
How to install rom v13:
unlocked bootloader reguired! Only for unlocked bootloaders!
axtract archive and run "install.bat"
read instructions!
After installing rom v13, install memory tweak (recomended for very smooth android):
download memory tweak -> http://d-h.st/H6p or v16_memory tweak + overclock 1.15 ghz -> http://d-h.st/XOx
reboot to recovery
mount usb storage
copy memory_tweaks.zip to sdcard
unmount sdcard
back to main menu and "install zip from sdcard"
reboot
Warning for rom v13:
Its all_in_one so do not install old boot images over this one, all reguired files will be installed trought installer! All partitions will be wiped so all userdata and your aplications will be deleted! Do not restore backups because I not guarating than everything will be working after perfoming backup restore! This is clean rom so if you need your favorite apps install these aps directly from market instead of restoring backups!
Download v14 rom (Firmware 6.1.1.B.1.54):
http://d-h.st/ceD
How to install rom v14:
unlocked bootloader reguired! Only for unlocked bootloaders!
axtract archive and run "install.bat"
read instructions!
when you see message in install.bat window "OK, NOW YOU NEED TO INSTALL ROM! HOW TO INSTALL? SIMPLE NAVIGATE RECOVERY MENU INSTALL ZIP FROM SDCARD..." pause at these mesage, go to recovery menu and "wipe userdata, than wipe cache, than go to submenu "mounts" and format system, go back to menu "advance" and wipe dalvik cache", than install rom.zip by menu "install zip from sdcrd"
Warning for rom v14:
Do not install any memory tweak from 30.Nov.2012 or any old!!! Memory tweak from 30.Nov.2012 is included in rom!!!
Do not perform restore from recovery because this is clean rom and reguire clen app installation from market!!!
Changelog 02.Oct.2012:
fixed problem with system partition mount - you can use backup/restore now! Adb, mass storage and "backup to zip" not working because problem with mass storage and usb... usb is not recognised in any way... still I have no idea why! Maybe something about init binary?
Changelog 04.Oct.2012:
fixed wifi, bluetooth and mobile data
Changelog 09.Oct.2012.:
Added touch screen buttons
disabled 3 buttons at bottom
fixed text aligment
new skin
Changelog 09.Oct.2012.:
Added touch screen buttons
disabled 3 buttons at bottom
new skin
Changelog 12.Oct.2012.:
fixed tool for making flashable zip in sony menu! Now you can create firmware (zip archive like HTC one, installable from recovery menu "install zip from sdcard" ! This zip archive contain boot and system so you can wipe everything and install these zip from menu "install zip from sd card" and you can get fresh installed firmware.. allso you can install ICS rom ower Gingerbread rom using these zip !)
If you want new font (smaller) I will add, just let me know!
Changelog 14.Oct.2012.:
some small updates
Changelog 16.Oct.2012.:
fixed usb
fixed adb
fixed mass storage mode (internal and external)
reboot to bootloader
added support for leds when AC charger is connected
some cleanups in ramdisk
V7 ; Changelog 20.Oct.2012.:
fixed problems for remounting rootfs to "rw" + problems creating fstab + problems with busybox and command "mount" with containing 2 arguments only...
added tool in tools menu for one click skin changing
V8 ; Changelog 27.Oct.2012.:
recovery:
fixed problem for assert board detection in updater-script
new font - Lucida Console
.
custom kernel from now:
added some governors (smartass2 + minmax + enabled interactive and conservative...)
enabled some io schedulers (cfq) and set as a default
swap enabled (now you can make swap on your sd card to use with Debian linux)
enabled most common needed (ipv4 and ipv6) xtables in iptables firewall
property set ramdisk phys base adress for Lotus
cifs + nls_utf8 (you can mount network folders)
enabled some crypto functions
some "ioremap" errors fixed
.
suprise:
some workarounds for adding support for compiling kernel with Linaro
kernel sucesfully compiled with Linaro toolchain!!! See whats benefits using Linaro :silly:
V8 ; Changelog 28.Oct.2012.:
Removed V8... new kernel will be Sony kernel, modified
V8 ; Changelog 30.Oct.2012.:
Repacked V8 but now only stock kernel _ module... I will play later with custom kernel, sorry!
It's now RC version 8 (mean release candidate v8 - stable!)
V9 ; Changelog 04.Nov.2012.:
custom kernel (all features like in V8 from 27.Oct.2012), not compiled with Linaro toolchain
init.d support
V10 ; Changelog 06.Nov.2012.:
fixed boot logo
fixed network stats
V11 ; V12 ; Changelog 09.Nov.2012.:
bluetooth - fix
inverted colors in boot logo - fix
new boot logo
V13 ; Changelog 14.Nov.2012.:
extended battery life - fix
kernel merges with latest Sony kernel for P
complete rom installer
memory tweak ; Changelog 30.Nov.2012.:
wifi mac (real mac from now)
enabled kernel same page merging aka KSM (enabled by init script on boot)
SIO and VR iosched (SIO set as a default)
some improvement in memcpy and memmove
new recovery v14 - new tools submenu (you can change boot logo easilly)
See result about perfomance from now! http://img16.imageshack.us/img16/549/device20121130173315.png
memory tweak + owerclock ; Changelog 30.Nov.2012.:
owerclocked kernel to 1.15 ghz
new governor - hotplug
v15_memory tweak + owerclock ; Changelog 16.Dec.2012.:
init script for on boot frequencies
new governors (thanks AnDyXX) - smartass2 (updated) + lulzactiveq + ondemandax + pegasusq
v16_memory tweak + owerclock ; Changelog 18.Dec.2012.:
persist mtp re enabled
fix for software update notification (problem was old version info in default.prop)
Tip and tricks for my CWM version:
Did you know about our CWM that you can change menu and text colors, backgrounds? Yes you can do it by puting menu.txt into ramdisk /res/images folder by writing to menu.txt for example:
122 122 122 255 255 255
First 3 numbers is rgb color for menu and seccond 3 numbers is rgb color for text... you need one space between numbers !!!
Here is some creative skins done to my HTC HD2 recovery by mlkjuggalo:
http://forum.xda-developers.com/attachment.php?attachmentid=873816&d=1327602621
http://forum.xda-developers.com/attachment.php?attachmentid=918464&d=1330133568
http://forum.xda-developers.com/attachment.php?attachmentid=919565&d=1330197024
http://forum.xda-developers.com/attachment.php?attachmentid=920011&d=1330223710
http://forum.xda-developers.com/attachment.php?attachmentid=922328&d=1330363561
http://forum.xda-developers.com/attachment.php?attachmentid=922789&d=1330384481
http://forum.xda-developers.com/attachment.php?attachmentid=923476&d=1330430278
http://forum.xda-developers.com/attachment.php?attachmentid=925079&d=1330523453
http://forum.xda-developers.com/attachment.php?attachmentid=925252&d=1330533287
http://forum.xda-developers.com/attachment.php?attachmentid=925800&d=1330560509
Kernel source:
http://dl-developer.sonymobile.com/code/copylefts/6.1.B.0.544.tar.bz2
Credits:
full credits to author of the Clockworkmod Recovery [koush]
full credits to public opened kernel source [Sony]
akkufix fox giving me ideas to fix usb
LeTama for great sin2raw tool and great split kernel tool
AnDyXX for cpu governors
every other who helped and tested our recovery
Hi, I've installed firmware before but just want to know, will this work well on the Sola? I have relocked my bootloader ahead of the ICS update, but I would like to test this if it works well on the Sola.
I have used all my thanks today, but thanks!! :laugh: :good:
SharpnShiny said:
Hi, I've installed firmware before but just want to know, will this work well on the Sola? I have relocked my bootloader ahead of the ICS update, but I would like to test this if it works well on the Sola.
I have used all my thanks today, but thanks!! :laugh: :good:
Click to expand...
Click to collapse
This will not touch your stock Gingerbread radio, bootloader and other low level memory, this will flash only boot and system so you can try! If this not working you can easilly restore your GB backup trought recovery, just install my CWM Sola kernel.sin, reboot to recovery, and restore backup! Make surre you create backup before you go to mess with Xperia Go rom!!! Make sure wipe everything + wipe system in mounts menu!
SharpnShiny said:
Hi, I've installed firmware before but just want to know, will this work well on the Sola? I have relocked my bootloader ahead of the ICS update, but I would like to test this if it works well on the Sola.
I have used all my thanks today, but thanks!! :laugh: :good:
Click to expand...
Click to collapse
You can give it a try. Since its only system, the worst that will happen is a bootloop
Tapatalked !
Uploaded! Happy testing :laugh:
I have big problems since ive flashed tft file from the other posts. Ive tried all of them. All are laggy.
Then ive reflashed the old ginger tft file and all goes well wifi data rate. Then ive flashed your kernel with recovery and flashed your room.zip!
Performance is best! But those Wifi and Data Issues returning. Its a mess
Now I got following Baseband = u8500-49020905-P2H_EC01
mk4y said:
I have big problems since ive flashed tft file from the other posts. Ive tried all of them. All are laggy.
Then ive reflashed the old ginger tft file and all goes well wifi data rate. Then ive flashed your kernel with recovery and flashed your room.zip!
Performance is best! But those Wifi and Data Issues returning. Its a mess
Click to expand...
Click to collapse
Great! So these isues is related to ICS firmware... I think Sony will fix in next ota.
mk4y said:
Now I got following Baseband = u8500-49020905-P2H_EC01
Click to expand...
Click to collapse
I have the same baseband! Is not that baseband from Gingerbread?
munjeni said:
Great! So these isues is related to ICS firmware... I think Sony will fix in next ota.
I have the same baseband! Is not that baseband from Gingerbread?
Click to expand...
Click to collapse
Yeah its from GB. U didnt notice this bug on your phone?
mk4y said:
I have big problems since ive flashed tft file from the other posts. Ive tried all of them. All are laggy.
Then ive reflashed the old ginger tft file and all goes well wifi data rate. Then ive flashed your kernel with recovery and flashed your room.zip!
Performance is best! But those Wifi and Data Issues returning. Its a mess
Now I got following Baseband = u8500-49020905-P2H_EC01
Click to expand...
Click to collapse
I not tested! Only I seen on first look... bluetooth not working in booth (unmodified tft, mine zip, modified tft... etc)... looks like bluetooth not working in any firmware??
Ive flashed back to GB. It doesnt make sense to use any of those tft files that are available...!!!
Yes I agre, curently GB is better than ICS on Xperia GO because our ICS is first ICS build from Sony, I think Sony leaked this build just to see us reaction and to test what working or how it working on X-Go... I think Sony will do next build better for sure! I think I will try to get an CM10 test build using some propertiary fies from our ICS build... found something interested on Cyanogenmod github about Sony Nypon.. Nypon use ~same proprietary files like in our ICS! See diference http://paste.ubuntu.com/1251945/ ... lines with "#" mising in Nypon but all other lines we have in our build! Allso Nypon use montblanc-common and kernel-u8500 ... I allready got kernel-u8500 working but only with recovery so maybe our stock kernel will working with Nypon build... will try... just need an start point ... first I need to fix recovery!
Edit:
found hats missing in recovery... forgot to include res folder :cyclops:
munjeni just read your post on cm10 i have been looking for a phone thats was alike to the go that has support from cm10 but havent come up with anything yet?
been searching the www regarding a cwm image is it not possible to use the cwm builder im intrested in the cwm touch recovery?
is there anyway we can oneboot into recovery using fastboot so we can still use update zips without having a flashable recovery?
as for the problems every1 is getting from the update i did mine with the first tft file to come out and have not seen any problems regarding speed or laggyness it runs a lot better than my stock gb rom.
Purpose of the every recovery is to stay installed into an partition so you no need to boot recovery using fastboot, just power off your phone than power on than you can see 5 diferent led colors than after vibration you need to press volume + or - to enter into recovery! I not like in Sony only thing that Sony have no dedicated recovery partition so we need every time to unpack boot images and add these recovery things... But another problem is if we have 10 kernels around xda so every user like allways diferent kernel and want recovery with another kernel ... why Sony just not add an dedicated partition for recovery on next ota update and add an volume up/down triger for booting into recovery??? This thing is realy missing and very inportant for every user!
About touch bassed recovery. Yes I will add these thing when I start messing with kernel. Allready tried to add touch support into Sony CWM but problem is I am unable to fix only "hold press to display" so I can see all trigers like tap, move, x position, y position...etc but only missing "hold" so without "hold" there is problem like holding and moving to display without releasing cause button triger because I am unable to add mising code that will register new press ONLY after tapp to screen is released... but I will create an kernel dev/input that will hold these toucj screen values and will be acesible from user space like I done on Desire C, than recovery will be touch bassed.
thanks for the reply. i understand that we want recovery to stay on the phone but without cwm i cant make a backup of my phone and i dont want to keep having to flashtool the ics because i dont have a nand backup so i was just wondering if there was a way to 1boot so that i can make the backups and add in any zips that i would like .
do you think now that you know the go is comparable to a cm10 supported device do you think you will be able to build a cm10 with recovery built in . or if not where is the best place to sweettalk cm devs or fxperia. realy like android but dont think we should miss out on a good O/S because sony is very slow with updates
Recovery fo X-Go is allready done, but only booting in GB room... see my signature! You can make backups, restores...etc without problem but curently now only using GB kernel and GB rom! I found why recovery fail to boot (after runing recovery with strace tool) with our ICS build...forgot to add folder to ramdisk that contain graphics "res" :laugh: so I will fix that tomorrow or maybe now!
About CM build.. Cm builds allready working on other Sonly 2012 devices so that will working too on Go... just need to find proper source code to get starting!
munjeni said:
Recovery fo X-Go is allready done, but only booting in GB room... see my signature! I found why recovery fail to boot with our ICS build...forgot to add folder that contain graphics "res" :laugh: so I will fix that tomorrow or maybe now!
Click to expand...
Click to collapse
yes i had the gb working but since the ics update the only way to run cwm is to reflash the boot from your sig but then it boot loops if i dont enter cwm so im not sure if this would make a ics backup or a gb backup also if i do this method to run zips(google now for instance) would i then just run ur ics zip and go would still b installed?
nosmaster said:
yes i had the gb working but since the ics update the only way to run cwm is to reflash the boot from your sig but then it boot loops if i dont enter cwm so im not sure if this would make a ics backup or a gb backup also if i do this method to run zips(google now for instance) would i then just run ur ics zip and go would still b installed?
Click to expand...
Click to collapse
Ok, I understand! And yes I will fix now because I really need working recovery on ICS .. when I fix recovery than you can create/flash zip bassed firmwares, restore, backup ...etc without needs for messing with computer and flash tool, just in few click you can swith between GB and ICS... its main purpose on my modification to CWM recovery!
munjeni said:
About CM build.. Cm builds allready working on other Sonly 2012 devices so that will working too on Go... just need to find proper source code to get starting!
Click to expand...
Click to collapse
is this going to be a difficult thing to do i have seen threads on porting but all seemed very confusing. do we know if cm will be doing full support for the go or will it just be user roms ?
Yes its very dificult and it will need more developers and more days, months for geting it full working or maybe not full working... some devices never got full working port!
Edit:
recovery fixed now... just need to test before upload...will be done in one hour max!
thank you so much for your help iv been looking around for about 4 week now for all this info i hope you get cwm working fully and will thank you in advance for the cm10 work
I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
You forgot to install the kernel which was present inside the zip.
svprm said:
You forgot to install the kernel which was present inside the zip.
Click to expand...
Click to collapse
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
aashishbhargav said:
Where was that file. I just have haida_PAC_jb-alpha-v15.0.0.zip
What should I do to fix my phone now. I can only go to fastboot mode.
Click to expand...
Click to collapse
It should be inside the zip as the op said in Neo V thread of PAC.
If you found it, do everything again. Here you got a how to (its for ray and arc but works for you to):
http://forum.xda-developers.com/showthread.php?p=33572615
dont forget to hit thanks for information, especially to op of named threads
best regards
Just change kernel.The Kernel inside .zip(Haida PAC JB ...).U have to install it with Fastboot method or flashtool software...please read carefully man....
the kernel is built-in with Recovery...
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
factory reset and wipe all will help u
same problem
aashishbhargav said:
Thank for all those who helped.
I had to flash kernel via flashtool in fastmode.
I have been a samsung user since 2 years. Happily flashing.
Did not know that kernel had to be flashed before flashing rom
Thanks for help :good:
Click to expand...
Click to collapse
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Flash whole stock firmware with flashtool so you are able to boot phone.
Then when you will know the right steps, put rom .zip into sd, flash the right kernel and finally install rom via cwm following dev's instructions.
To flash a custom kernel you need unlocked bootloader.
Sent from my MT15i using xda app-developers app
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
you flashed .431 kernel but u had to flash kernel from inside zipped ROM file (img file)
How to Flash PACman ROM (first time)
1 - MAKE BACKUP
2 - download rom zip file, store it somewhere on your SD card (I have a "FlashFiles" folder)
3 - copy boot.img from zip to pc, where you can find it
4 - flash kernel in ROM zip file in fastboot mode
5 - reboot into recovery
!! did you make a backup ??
6 - flash ROM
7 - flash gapps (or inverted gapps if you want)
8 - factory reset
9 - wipe cache
10 - wipe dalvik cache
11 - flash any other zip's you need/want to (e.g. wifi modules if you usin other kernel as in the zip)
12 - reboot
13 - enjoy
14 - click on THANKS button in szl's Original Post
aashishbhargav said:
I have Xperia Neo V running on ICS 4.0.4
Bootloader unclocked: Yes
Rooted: Yes
CWM Recovery Installed : Yes
CWM ROM backUp : Yes
wipe data/ dalvic
flashed Pacman latest rom// success
flashed Gapps// Success
Rebooted, now cannot go past Sony logo and cannot go to recovery also. Looks like I am soft bricked.
Please advice.
Click to expand...
Click to collapse
I happened to soft-brick my Neo V few days back after installing a custom ROM. Please read on to see what helped me get my Neo V up and running again.
If your phone is stuck at SONY logo, I doubt it will go into CWM recovery mode either. I had tried flashing stock kernel through Flashtool, and also tried the FOTA-Unbrick method via flashtool, but even that didn't help. Finally, I used the "repair" option in PC Companion which flashed Stock ICS ROM on my Neo V (however, all data on phone's internal memory was lost and my phone had to e rooted again). But at least my phone was recovered. Hope this will guide you.
Flashing PAC man ROM
varun_Gimmic said:
ok so i did the same (did not flash kernel).................but now after flashing the .431 kernel via flashtool it is still not happening......it wont go past the sony logo..........when i try with SEUS it says i already have the latest software installed...........please help.
Click to expand...
Click to collapse
Please read carefully :
U have to have a rooted and bootloader unlocked in phone to flash ROMs (OBVIOUS )
1)Copy the contents to your SDCARD of phone (ROM ZIP File + gapps ZIP)
2) Extract only the boot.img from the ROM zip to some location in your PC
3) Use Flashtool to flash the boot.img (FIRST THING TO DO)
3.a) Select Fastboot mode from flashtool
3.b) While the phone is connected, Click Fastboot phone using ADB.(Phone will restart and blue led will glow showing its in fast boot mode)
3.c) Now select the option, select kernel to flash in the window and chose the boot.img that is in the PC.
Now the flashtool automatically flashes the boot.img(which has the kernel included).
Unplug from PC and try to reboot.. On booting enter CWM mode and flash the ZIP already placed in the SDCARD(Ensure to follow the appropriate post to follow steps like clearing cache\Dalvik and system etc..).
HAPPY FLASHING
NEO V | PAC MAN 18
Hit Thanks if my words lightened you hair :highfive:
superb PRAVIN89 i think u r a teacher
superb Xplaination
---------- Post added at 01:34 AM ---------- Previous post was at 01:30 AM ----------
superb PRAVIN89 i think u r a teacher :victory::victory::victory::victory::victory:
superb Xplaination
@Sam: Lol. Thanks.. And Nope I'm not a teacher. ... Never had that thought too
Hit thanks if helped
Sent from mt11i
Kuhhan said:
download link..
Click to expand...
Click to collapse
Which link are you looking for? Download link is in first post of op
Sent from my Galaxy Nexus using Tapatalk 2
I think he's just spamming to get to post in Development section
Sent from my MT11i using xda premium
I present to youTheBrainsKernel - ICS
:good: Please hit the THANKS button and DONATE TO ME (button on the left) if you like my rom :good:
Dear Xperia U users,
This Kernel is a based on latest 4.0.4 (6.1.1.B.1.54/6.1.1.C.1.0) SONY ICS Kernel.
==CWM touch 5.5.0.4==
- 6.1.1.B.1.54/6.1.1.C.1.0
- prerooted
- autoroot function (since Version 3) -> roots your phone automatically
- governors/scheduler (Version 3)
--> Press 'volume down' when Sony logo appears and notification light (small one) blinks
Version 1: CWM touch 5.5.0.4
Version 1 - flash via Recovery version: CWM touch 5.5.0.4
Version 2: CWM touch 5.5.0.4 rc8 (more cwm features)
Version 3: CWM touch 5.5.0.4 - autoroot / governors
Version 4: CWM touch 5.5.0.4 - autoroot (no governors)
==CWM 6.1.0.2==
- 6.1.1.B.1.54/6.1.1.C.1.0
- prerooted
- new bootsplash
- autoroot function -> roots your phone automatically
- governors/scheduler
- Maybe bugs
--> Press 'volume down repeatingly' when Android appears
Version II: CWM 6.0.1.2 - autoroot/ governors
==CWM FXP==
- 6.1.1.B.1.54/6.1.1.C.1.0
- prerooted
- autoroot function -> roots your phone automatically
- governors/scheduler
- Maybe bugs
--> Press 'volume down' when Sony logo appears and notification light (small one) blinks
Version A: CWM FXP152 - autoroot / governors
Version B: CWM FXP201 - autoroot / governors
==Instructions==
- Unpack and flash via fastboot or flashtool
--> How to fastboot
- boot in recovery and clear dalvik and cache
- Boot phone. Done.
==Instructions --> Only for special named flash via recovery version==
- Copy file to internal memory
- boot in recovery and flash file
- clear dalvik and cache
- Boot phone. Done.
==credits==
- Munjeni for Ramdisk, CWM 5.5.0.4 touch and HELP
- KeiranFTW for CWM 6.1.0.2
- drsanket_xperia_u and Equama for testing
- Doomlord for autoroot script
- FXP for ramdisk (FXP201)
Is this new version
Sent from my Xperia U using xda app-developers app
PrakashGD said:
Is this new version
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
sure new
thebrainkafka said:
Working cwm kernel 6.1.1.B.1.10 for backup
Click to expand...
Click to collapse
What does it mean?
Ok just tried this on your rom but it didnt really boot,it didnt even get back into flashmode,i could get it back it into fastboot and reverted back to stock kernel,cant get a log since there is no boot..
might have to take a look into the file again..
bharat_goku said:
Ok just tried this on your rom but it didnt really boot,it didnt even get back into flashmode,i could get it back it into fastboot and reverted back to stock kernel,cant get a log since there is no boot..
might have to take a look into the file again..
Click to expand...
Click to collapse
When u dun get back to flashmode
Just remove ur battery once
And reinsert it
bharat_goku said:
Ok just tried this on your rom but it didnt really boot,it didnt even get back into flashmode,i could get it back it into fastboot and reverted back to stock kernel,cant get a log since there is no boot..
might have to take a look into the file again..
Click to expand...
Click to collapse
Ok, damn it.
thebrainkafka said:
Ok, damn it.
Click to expand...
Click to collapse
Did u modified the ramdisk???
Whose ram disk r u using?
drsanket_xperia_u said:
Did u modified the ramdisk???
Whose ram disk r u using?
Click to expand...
Click to collapse
Im using munjenis working ramdisk.
Think its an issue with packing zimage and ramdisk. ?
uploaded two more promising candidates!
Thx for testing!
drsanket_xperia_u said:
When u dun get back to flashmode
Just remove ur battery once
And reinsert it
Click to expand...
Click to collapse
Uh sorry didn't explain properly,
Flashed kernel
Then tried booting normally didn't work,
Removed batery reinserted and retried still no go
Next option flash stock kernel.sin from c.10
To do so from flashtool need to enter flash mode,
But m not able to enter flash mode fr some reason on that kernel, although fastboot works,
Anyway have no issue I got back to stock kernel was jus reporting my error
Sent from my ST25i using xda premium
New test candidates online!
Im sure one will work properly!
bharat_goku said:
Uh sorry didn't explain properly,
Flashed kernel
Then tried booting normally didn't work,
Removed batery reinserted and retried still no go
Next option flash stock kernel.sin from c.10
To do so from flashtool need to enter flash mode,
But m not able to enter flash mode fr some reason on that kernel, although fastboot works,
Anyway have no issue I got back to stock kernel was jus reporting my error
Sent from my ST25i using xda premium
Click to expand...
Click to collapse
Hmm thats strange
I have done a lot of kernel testing bt never lost my flashmode
No matter what boot.img I used
I was even stupid enough to flash xperia p kernel bt still had flashmode
---------- Post added at 12:26 AM ---------- Previous post was at 12:23 AM ----------
thebrainkafka said:
New test candidates online!
Im sure one will work properly!
Click to expand...
Click to collapse
I can test it bt tomorrow
Its late night here 12:30am
I cant use my lappy now
Anyways someone will report it
No one interesting in testing?
Please report results of test!
Thx
Any news?
Added two booting candidates!
just differ in cwm version
Please give it a try!
Flashed kernel9.elf
Just dim light on the screen
Btw flashmode and fastboot working
Just needed to remove the battery
And sincere apologies for delayed testing
Edit - I downloaded it 3hrs back
Now will test beta 2
Will report back
Sent from my ST25i using Tapatalk 2
what's different between 10 & 10a????
i'm can boot with both
luyenbichta said:
what's different between 10 & 10a????
i'm can boot with both
Click to expand...
Click to collapse
Thx for testing where did it stuck?
Version 2 beta (kernelc10a) reporting
Bluetooth is unable to swtich on
Will continue using this kernel today and report back
Sent from my ST25i using Tapatalk 2
drsanket_xperia_u said:
Version 2 beta (kernelc10a) reporting
Bluetooth is unable to swtich on
Will continue using this kernel today and report back
Sent from my ST25i using Tapatalk 2
Click to expand...
Click to collapse
Think thats due to the used recovery!
Please test version 1 beta.... more promising recovery in it!
but at least its booting!
Thx