I'm using Cyanogen 9 alpha 3 on my Folio 100 and i think it's the best rom ever!
I need to use it with my nokia x6 hotspot which needs an ad-hoc connection to work.
Using wifi analyzer I can see the SSID, but (ofc) i can't connect to it because "my android device is still not supporting ad-hoc connections!".
I've tried to get it working with the following tutorial:
http://forum.xda-developers.com/showthread.php?t=1438297
Unfrotunately I think the wp_supplicant file suggested is not appropriate for the Folio100, it is not working at all.
Any ideas or suggestions?
I need your help
Thanks.
I don't think there is any official solution for Ad-hoc ICS yet.
But i was searching for the same thing for my SGS2 and here is what i found
1) This Tool
2) This thread for HTC Sensation
3) And this thread too for the HTC Sensation
I didn't try any of them, so you are free to try!
Good Luck!
Related
Hi folks
As mentioned in a thread I posted a couple of weeks back (http://forum.xda-developers.com/showthread.php?t=1207476), Samsung have very annoyingly blocked WiFi channels 12 & 13 on US-originated Tab 10.1s with their latest TouchWiz UX update.
I've got a Tab that I had been using quite happily on chan 13 (minimal interference from neighbouring WiFi APs), but after the updated it wouldn't connect at all, yet could see other networks. Moving the AP channel down <12 solved it, but this only works for my home AP that I have control over. The one at work is on either 12 or 13 and therefore now isn't visible.
The guys at PC Pro have tried their UK-purchased Tab 10.1 and it's working fine, so it seems to be just with the US ones that Samsung have blocked this.
I've logged a support request about it but don't hold out any great hope of them fixing it.
I was therefore wondering if anyone could think of a good way to re-enable this. Do the Tabs had a modem/radio type bin that could be flashed along the lines of the SGS II? If so would this do the trick or are chans 12/13 being blocked elsewhere?
Thanks for any suggestions - as you can see at http://forum.xda-developers.com/showthread.php?t=1223978 I'm not the only one who has run into this problem!
(PS - have already tried a full factory reset before anyone suggests it )
What about flashing a Euro rom, would that then enable the extra channels?
That's the kind of thing I was wondering about, but wasn't sure if it would work or not.
My model number is GT-P7510UWYB and it's 16GB WiFi only model.
Do you think it would just be a case of getting hold of the stock August update for a UK device (and if so, any links? ) and installing it via Download mode/Odin or would it object to that saying it's not a valid ROM for that model?
I don't know I.f there's a newer rom than those shown on the samfirmware site, someone with more knowledge than me may point you in the right direction.
http://www.samfirmware.com/WEBPROTECT-p7510.htm
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to Q&A
Hey folks, I've been trying to get the Arduino Mega ADK to work with two of my devices and so far I'm been totally unsuccessful. Both my Nexus S and Nexus 7 seem to do nothing with connected to the Mega ADK.
So, here are the details and hopefully someone can help out.
First off, I'm experienced with Arduinos and µCs. I'm 100% sure that I've correctly compiled and flashed the demo sketch onto the ADK. In the serial monitor I can see that the ADK will boot and attempt to get the Android device to do something and fails (it tries this continually unless a device successfully enters accessory mode and responds).
Both these devices are supposed to have support for the ADK and I've checked the devices and both have the correct .xml and .jar files for doing so. However, I'm currently running CM10 on both devices and I'm wondering if perhaps the kernel doesn't have the accessory mode enabled or if there's another stumbling block inherent to CM10.
Doing some google research I see that certain updates (4.0.3) have broken ADK support in the past, so perhaps it's just a Jellybean issue? Is there a way of checking kernel options or flashing a kernel known to work? I'd like to narrow down some of the possible issues here.
Hey mate!
I had the same issue, I fixed by using the library version 2 from labs.arduino.cc/ADK. You can download it directly from here: labs.arduino.cc/uploads/ADK/GettingStarted/ArduinoADK-beta-001.zip.
From what I've read the problem is that Android 4.1 uses adk version 2 and has some incompatibilities with the previous version.
Best,
Alex
PD) Sorry for not hotlinking can't do it yet with this account
I've been using that version and still get no response from the Android device. I suppose I'll have to flash stock 4.1 and see if that works, Sadly there's very little proper documentation on this and not a lot of people seem interested in accessory mode devices.
Arduino Mega ADK Nexus 7 Tablet
SirLalala said:
Hey mate!
I had the same issue, I fixed by using the library version 2 from labs.arduino.cc/ADK. You can download it directly from here: labs.arduino.cc/uploads/ADK/GettingStarted/ArduinoADK-beta-001.zip.
From what I've read the problem is that Android 4.1 uses adk version 2 and has some incompatibilities with the previous version.
Best,
Alex
PD) Sorry for not hotlinking can't do it yet with this account
Click to expand...
Click to collapse
Hi mate,
I hope that you are able to see this message. I have the similar issue. I tried using this version 2 of this library and when i compile the example code "demokil_20", i get the error " 'USB' does not name a type".
Please help me out here.
Best Regards,
Arslan
[email protected] said:
Hi mate,
I hope that you are able to see this message. I have the similar issue. I tried using this version 2 of this library and when i compile the example code "demokil_20", i get the error " 'USB' does not name a type".
Please help me out here.
Best Regards,
Arslan
Click to expand...
Click to collapse
I got the same USB error. I haven't figured out the problem yet, but I was able to get another example from the version 2 adk library working with jelly bean. I think it was called termtime or something like that. It recognizes the phone the and will pop up saying theres an arduino accessory attached and there is no application to open for that accessory. You can change the example code to "Google" and "Demokit" to auto launch the Demokit.apk app.
I just got this arduino adk two days ago and only have one Android device, a Samsung Captivate with slimbean rom, to test it on.
Hello out there,
when I'm on the way I use an USB-stick with my laptop running WinXP to go online. I use XP's internet connection sharing to connect my other mobile devices (ipod, iphone) to the internet. Unfortunately my (rooted) Galaxy SII with IceCreamSandwich can not handle ad-hoc points, and XP can not handle infrastructure mode. So far I díd not find a possibility to patch IceScreamSandwich (e.g. a working wpa_supplicant). My question is now: Which ROM can handle ad-hoc?
Thnx for help,
oliaros
I've installed this rom but have trouble not connect to wifi though still full wave
http://forum.xda-developers.com/showthread.php?t=2012483
chulsoo said:
I've installed this rom but have trouble not connect to wifi though still full wave
http://forum.xda-developers.com/showthread.php?t=2012483
Click to expand...
Click to collapse
Hmm... CM10 by scritch007 worked for me on my XPERIA X10i when I tried it on an earlier version.
You'll still be using 802.11g, as 802.11n is not supported. Of interest I noted channels 12-13 are supported too, for countries that allows these channels. Maybe even 14 in Japan.
Did you attempt to connect to your AP in the initial connection wizard, before you had a chance to 'modify' your system and/or install additional software?
There is a Scritch007 CM10 forum post in the General section that may be able to assist you with known WiFi issues with a given version of CM10.
Trying to connect to my corp network and having no luck. I've tried a couple of the advanced wifi editors, tried hacking my wpa_supplicant, but still no joy.
Tried bog standard Touchwiz, Android HD v24,25 and 30, Paranoid Android 3.15, Cyanogen 10.1 ............
Anybody got a suggestion of a ROM that supports 802.1X out of the box?
Note I do have to put in a Windows domain/user which may be another factor that's making it harder.
Oh and my Nexus 7 running PA 3.5 works.....
(or assistance to get my Android Revolution HD v25 working )
Thanks in advanced.
isn't the WiFi protocol more a kernel & hardware related issue then a ROM related one?