[Q] I717 fighting ROM flash. - AT&T Samsung Galaxy Note I717

I have a rooted I717. I have tried to load multiple ROMs through CWM (ICS_CLC5_Alpha, SAUROM_XLA2_RCVII, etc.). However, I get the same message every time I start the flash: E: short write of tmp sideload package.zip (no space left on device). I have used multiple apps to confirm that the phone is rooted and have over 10gb of data available on the SD card.
I have rooted multiple devices, namely my past Captivate, and never had much of a problem. I've never worked with a device that fights me like this before.
Any advice, suggestions, tutorial, etc. would be greatly appreciate.
(I also found an ICS ROM that load through odin here:
http://www.androidlookout.com/install-cyanogenmod-9-galaxy-note/168/
Can anyone with a trained eye verify if this ROM would be stable on the I717)
Thanks.

It does not sound to be like you have ClockworkMod Recovery installed. Are you sure you are not trying to flash under Android System 3e recovery? Can you post a picture of exactly what you are selecting in recovery to flash?
I don't know how trained my eyes are, but I can assure you, if you flash that ROM you linked it will bork your device. That is for the International note (our phones weren't released yet when the article was written).

Yes that's for the international note.
Sent from my SAMSUNG-SGH-I717 using XDA

Here's a screen shot (I believe this is what you're asking for). It says I'm running Recovery 2.5.1.2.
Sent from my SAMSUNG-SGH-I717 using XDA

Screenshot didn't come through, but I do believe that is the Android System Recovery version. You can only flash custom stuff through the ClockworkMod recovery here:
http://forum.xda-developers.com/showthread.php?t=1526431
Use Odin to flash that. Then you will be in a blue recovery that will look like this:
http://dl.xda-developers.com/attach...3fd0/4f7f5e62/9/3/3/4/7/6/20120305_160801.jpg
You can flash your zips from there successfully.

I'll try that tonight. Thanks for the heads-up. The shear number of threads here can be daunting to sort through.

By the way, will I be able to delete unwanted applications after correctly rooting the device without flashing a ROM? (I was able to on past devices. Just curious.)

Related

[Q] rom manager not recognizing fascinate

This is the first time I rooted my phone and I used step 6 on this link in your forum http://forum.xda-developers.com/showthread.php?t=1238070 . Everything went fine but I then downloaded rom manager and when I select flash clockworkmod it only gives me the choice of choosing the samsung epic4g or the samsung galaxyS i9000. It does not give me the option of choosing the fascinate. I selected the i9000 but stopped there because I figured that I should try to fix this situation and be able to select the fascinate, before I move foward. Please help me move foward so I will be able to put a rom on my phone. Any help would be greatly appreciated.
Thanks
lucash312 said:
This is the first time I rooted my phone and I used step 6 on this link in your forum http://forum.xda-developers.com/showthread.php?t=1238070 . Everything went fine but I then downloaded rom manager and when I select flash clockworkmod it only gives me the choice of choosing the samsung epic4g or the samsung galaxyS i9000. It does not give me the option of choosing the fascinate. I selected the i9000 but stopped there because I figured that I should try to fix this situation and be able to select the fascinate, before I move foward. Please help me move foward so I will be able to put a rom on my phone. Any help would be greatly appreciated.
Thanks
Click to expand...
Click to collapse
rom manager is useless for the fascinate...
I also ran into this issue. If your CWM is not "sticky" (it goes to System Recovery <3e> when you reboot recovery), you must flash the appropriate version of CWM with ODIN before a ROM flash. (CWM ALL.tar for bml roms [anything that is not cm7, MIUI, or ICS] or cwm4_fixed_for_cm7.tar for MTD ROM's [cm7, MIUI, or ICS])
MultipleMonomials said:
I also ran into this issue. If your CWM is not "sticky" (it goes to System Recovery <3e> when you reboot recovery), you must flash the appropriate version of CWM with ODIN before a ROM flash. (CWM ALL.tar for bml roms [anything that is not cm7, MIUI, or ICS] or cwm4_fixed_for_cm7.tar for MTD ROM's [cm7, MIUI, or ICS])
Click to expand...
Click to collapse
if the op would of followed the guides instructions correctly, he would not of ran into that issue in the first place...
droidstyle said:
rom manager is useless for the fascinate...
Click to expand...
Click to collapse
But if that's the case, why does Koushik make a ROM for the fascinate and have it available on his site?
(Does the Epic4G simply represent all CDMA phones, and the i9000 GSM? Don't see why that would matter anyway tho)
(I can't post a direct &#% link yet, but it's on his website.
This makes absolutely no sense!? He's got ROMs up there for just about every Android phone on the market, all to be used with ROM Manager.
I wanted to install it via Odin but naturally that would be too simple: it's a zip file and Odin won't recognize anything but tar and 2 others formats.
You can flash any .zip ROM with CWM. There's no need for ROM Manager. BTW, you can post a link if you uncheck "parse links in text automatically."
Nymblz said:
But if that's the case, why does Koushik make a ROM for the fascinate and have it available on his site?
(Does the Epic4G simply represent all CDMA phones, and the i9000 GSM? Don't see why that would matter anyway tho)
(I can't post a direct &#% link yet, but it's on his website.
This makes absolutely no sense!? He's got ROMs up there for just about every Android phone on the market, all to be used with ROM Manager.
I wanted to install it via Odin but naturally that would be too simple: it's a zip file and Odin won't recognize anything but tar and 2 others formats.
Click to expand...
Click to collapse
all you need to do is boot into cwm recovery via the power menu and flash away. the problem with rom manager on the fascinate is getting into the right recovery...causes more problems than its worth on this device. make sense yet? probably not since you have not been down this road yet, but many of us have. so take the advice given or dont and learn the hard way.
Honestly, I am trying to take the advice given but not all of it fit my situation.
I'm definitely something of a noob to Android (Not to linux or IT though). I've had my phone for all of a month and rooted it only days ago.
It's all starting to come together, finally. It's tricky for a noob because there are so many different versions of the phone hardware, versions of Android, this or that kernel that only works with these ROMs, old/newer versions of those, old posts and advice, newer posts with adjusted advice.. etc.. It's been a week long crash course!
Anyhoo, I couldn't flash/upgrade CWM because it didn't stick from the original Odin install. When I rebooted, I'd always return to the stock <3e> recovery. Even after two more installs of CWM via Odin.
I used the cwm-recovery-all.tar in your guide, Droidstyle. (great job BTW)
I followed the directions in Section 6 to the letter. I even printed it out and highlighted key sections.
So you see, I was in a catch-22; I needed CWM to flash CWM? Odin was my only option at that point.
Then I read on another thread here about renaming the /system/recovery-from-boot.p script, and installing CWM once more.
That worked, so now I can finally boot into CWM recovery like a happy man. (I also tried a more specific version of CWM for good measure: cwm4-bml-i500.tar, not really sure if that made a difference)
So I made my first real nandroid backup last night.
Next on my list is a new kernel. Still deciding between KGB, lean, and whatever else is out there.
I still don't get the whole mess with ROM Manager though. I agree with you, DS, I just don't get why he'd have zips for every phone under the sun but his own app doesn't seem to allow them to be used. It's bizarre. The latest reviews on the market are not flattering either.
Nymblz said:
It's tricky for a noob because there are so many different versions of the phone hardware
Click to expand...
Click to collapse
You are on the Samsung Fascinate. If it is Verizon then it is model number i500. If it doesnt say Fascinate or i500 it isn't for your device and you don't need to worry about it. If you flash something that isn't stated as being for the i500 or VERIZON Fascinate then you will have a lovely new temporary paper weight.
Nymblz said:
Anyhoo, I couldn't flash/upgrade CWM because it didn't stick from the original Odin install. When I rebooted, I'd always return to the stock <3e> recovery. Even after two more installs of CWM via Odin.
I used the cwm-recovery-all.tar in your guide, Droidstyle. (great job BTW)
I followed the directions in Section 6 to the letter. I even printed it out and highlighted key sections.
Click to expand...
Click to collapse
You couldn't have followed it to the letter because it is a well known fact that if you boot up with a stock kernel still flashed it will replace your recovery. Droidstyle certainly knows this and certainly accounted for it in his guide. So, you need to either boot directly into CWM or flash a non-stock kernel prior to rebooting the phone.
Nymblz said:
Then I read on another thread here about renaming the /system/recovery-from-boot.p script, and installing CWM once more.
That worked, so now I can finally boot into CWM recovery like a happy man. (I also tried a more specific version of CWM for good measure: cwm4-bml-i500.tar, not really sure if that made a difference)
So I made my first real nandroid backup last night.
Click to expand...
Click to collapse
Yeah it sounds like that will work...not the most elegant way to take care of it...but it sounds like it would be okay.
Nymblz said:
Next on my list is a new kernel. Still deciding between KGB, lean, and whatever else is out there.
Click to expand...
Click to collapse
We already talked about the kernel situation. Consider Geewiz if you want something thats all-in-one and pretty much impossible to mess up. KGB is good. Leankernel always gave me the best battery life but YMMV.
Nymblz said:
I still don't get the whole mess with ROM Manager though. I agree with you, DS, I just don't get why he'd have zips for every phone under the sun but his own app doesn't seem to allow them to be used. It's bizarre. The latest reviews on the market are not flattering either.
Click to expand...
Click to collapse
He showed no interest in helping the devs here get ROM manager working (again) on the phone. If you gave him money, blame him for not providing the support and resources to get it working on this phone. Some people are umm...."lacking in people skills."
Oh, and as great as the Gingerbread ROMs are...the mtd ICS roms blow them out of the water

[Q] got myself stuck and want simplicity and education (nooby)

OK so it started with having a well balanced stock rooted 4.0.1
the main reason i root is for tethering
i had a carrier update that i was hoping was 4.1 cuz i am dying for google now
ran that but got stuck in the boot (as in not a boot loop but just infinite boot)
i would simply like to have my phone back on a stock rooted ROM* preferably ICS
i attempted "solutions" i found on here for using odin to "plop" a stock rooted ROM* on there but it turned out to be Gingerbread -_-
so i am currently dealing with that and what appears to be a stock Bootloader*
*i barely understand all these terms so please let me know i love to learn and i just cant wrap my head around all of it but any tips would be great. as far as i understand the boot loader is like the boot menu on a computer in the bios and is accessed when holding down all three hard buttons and gives you the selection menu, and the ROM is like the OS, and i think flashing is whenever you use odin to install the ROM instead of the boot loader for some reason.
I apologise for the noobieness but this is like the only way i learn...from direct Q&A :/
thank you in advanced
First off, download:
UCLE5 ICS- This is the stock AT&T GS2 ICS and is already rooted.
Fire up Odin, and:
Code:
Put UCLE5_Stock_Rooted.tar in the PDA slot in Odin.
Reboot your phone.
Oh and, a ROM is sort of a firmware that runs atop a kernel. Usually ROMs and kernels are put in ZIP files for flashing via ClockworkMod Recovery, but in specific cases (such as with Samsung), you can flash them via Odin or Heimdall in .tar formats.
Basically an Android phone needs both a ROM and kernel in order to run. From my very limited knowledge, a kernel is what controls overclocking and other processor related tasks. It also can help define the keylayouts for this particular device. It also contains the system recovery. A ROM holds all the system framework files that arguably makes the phone what it is to the average user. There are many ROMs that are available, such as Touchwiz (Stock/Modded Samsung), AOSP (Stock/Modded Android), Miui (Based off of either Samsung or AOSP, sort of it's own thing).
EDIT: Also, don't be sorry! Feel free to ask questions (as long as you've searched already), and remember that everyone starts somewhere.
We understand that you're new but please attempt to search your problem. Also, 4.0.1 does not and has never existed for our device so I don't know where you got that. Everything else though is easily found on Google, I don't buy that "I need spoonfeeding" line for a second.
Sent from my Zanpakuto using Getsuga Tensho!
PM me and I can give you further instructions if you still can't figure it out.
Hey thanks for your response!
I haven't had the time to try it out just yet (super busy lately) but as soon as i get the chance i will leave a reply as to how it goes.
Also thanks for the explanation. That really helps. I have always wanted to get more into the android field to learn more about the devices i'm using every day.
Ps: The reason for the apologetic sorry is to stand as a polite understanding tone from people who frequent the forums and discourage new posts while assuming no research has been done. i have searched for a good two hours but finding something relevant enough that i would be comfortable progressing through is very difficult and as i mentioned earlier i do learn better from direct Q&A. Thank you for understanding.
~Killubear
estabien said:
First off, download:
UCLE5 ICS- This is the stock AT&T GS2 ICS and is already rooted.
Fire up Odin, and:
Code:
Put UCLE5_Stock_Rooted.tar in the PDA slot in Odin.
Reboot your phone.
Oh and, a ROM is sort of a firmware that runs atop a kernel. Usually ROMs and kernels are put in ZIP files for flashing via ClockworkMod Recovery, but in specific cases (such as with Samsung), you can flash them via Odin or Heimdall in .tar formats.
Basically an Android phone needs both a ROM and kernel in order to run. From my very limited knowledge, a kernel is what controls overclocking and other processor related tasks. It also can help define the keylayouts for this particular device. It also contains the system recovery. A ROM holds all the system framework files that arguably makes the phone what it is to the average user. There are many ROMs that are available, such as Touchwiz (Stock/Modded Samsung), AOSP (Stock/Modded Android), Miui (Based off of either Samsung or AOSP, sort of it's own thing).
EDIT: Also, don't be sorry! Feel free to ask questions (as long as you've searched already), and remember that everyone starts somewhere.
Click to expand...
Click to collapse

Removing TWRP Recovery

New to this - I really apologize if this has been covered before but I've been searching all evening and not coming up with a definitive answer.
What's the easiest way to remove a custom recovery (like twrp) and go back to stock? Still on the stock rom, just have custom recovery. I manually deleted a nandroid backup using a file manager from my sd card yesterday, and now when booting into recovery it sits on the twrp screen for easily 10-15 minutes. I can't fathom why that would have an effect on the start up time but that's all I can think of that changed. I've tried re-installing twrp via goomanager - no change.
Is there a way to do so without using usb? I'm curious because the first S4 I had, the usb port went bad after only a month and I was in a panic that I wouldn't be able to get it back to stock (until I finally got it to work long enough to flash it with odin). Really don't want to risk that happening again.
Looking to run some roms once I think I understand at least half of what I'm doing, but trying to be cautious. I'd like to keep twrp but I want to make sure it's working right by loading a clean install of it.
Thanks in advance.
A lot of users are experiencing the lag with TWRP version installed by Goo Manager - (TWRP 2.6.0).
The link below has a flashable zip to version 2.5.0.2, this version seems to be stable and doesn't lag at the TWRP screen for most people including myself.
I would try flashing this and I think it will solve your problem.
http://forum.xda-developers.com/showpost.php?p=45006486&postcount=289
gadget! said:
A lot of users are experiencing the lag with TWRP version installed by Goo Manager - (TWRP 2.6.0).
The link below has a flashable zip to version 2.5.0.2, this version seems to be stable and doesn't lag at the TWRP screen for most people including myself.
I would try flashing this and I think it will solve your problem.
http://forum.xda-developers.com/showpost.php?p=45006486&postcount=289
Click to expand...
Click to collapse
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
bretbretterson said:
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
Click to expand...
Click to collapse
You flash it via recovery. Put in your sdcard/internal boot to recovery amd use the install zip option. Navigate to where it is and flash away.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk. now Free
bretbretterson said:
Thank you. I'm a little stumped on what to do with the zip now that I have it though and all my searching for "loading recovery with goo manager" just shows the method to load the newer version. Or if you're supposed to load it via pc, what do you use? Odin doesn't like any of those file types.
Sorry if this is a dumb question. Probably just not searching for the right thing.
Click to expand...
Click to collapse
Yes, it is a flashable zip, just flash it in the recovery you have now.
I found this post based on the OP's original question, "how to remove TWRP recovery".
I have been flashing rooted ROMs for a while now via ODIN, but am just now starting to foray into the realm of custom recoveries. Before I install TWRP though, I wanted to know how to remove it just in case something ever goes wrong. That is, I've been avoiding the use of a custom recovery so far because if something ever happened to my device, I could just flash the stock ROM, and having already used Triangle Away, Samsung will never be the wiser and would service my device, but with a custom recovery installed, they would be able to see I'm not running totally stock.
So, is there a way to completely return my device to 100% stock after installing TWRP? And if so, how would I go about doing that?
My device is a Samsung Galaxy Note 10.1 GT-N8013, currently running a root injected stock ROM, 4.1.2
EDIT: I just noticed that this is in the S4 forum, which my N8013 obviously is not, but the answer to my question should be the same regardless, yes?
margentieri said:
I found this post based on the OP's original question, "how to remove TWRP recovery".
I have been flashing rooted ROMs for a while now via ODIN, but am just now starting to foray into the realm of custom recoveries. Before I install TWRP though, I wanted to know how to remove it just in case something ever goes wrong. That is, I've been avoiding the use of a custom recovery so far because if something ever happened to my device, I could just flash the stock ROM, and having already used Triangle Away, Samsung will never be the wiser and would service my device, but with a custom recovery installed, they would be able to see I'm not running totally stock.
So, is there a way to completely return my device to 100% stock after installing TWRP? And if so, how would I go about doing that?
My device is a Samsung Galaxy Note 10.1 GT-N8013, currently running a root injected stock ROM, 4.1.2
EDIT: I just noticed that this is in the S4 forum, which my N8013 obviously is not, but the answer to my question should be the same regardless, yes?
Click to expand...
Click to collapse
Answer would be device specific
Sent from my cm_tenderloin using xda app-developers app
Thanks Gadget, Hex. TWRP 2.5.0.2 works great. But just for future reference, is the only way to revert to the stock recovery by flashing a stock device image via odin over usb? So if the USB port were to fail entirely, I would be SoL - correct?

[Q] Help! Installing Roms on Verizon Note 2 I605VRAMC3

I am looking for some help bc of all the roms out there I am really confused. Ihad a droid X before this and flashed several roms without a problem. Here is when I get lost:
Right now I am back on stock I605VRAMC3.
I use adam outliers root method to get rooted with super user acess.
This gives me TWRP not CWM.
If I use TWRP to flash a rom I end up with a bricked phone.
I would like to use a CM11 4.4 rom or something similar. When I watch the video on galaxynote2root.com the user uses CWM and if I use that on my phone it turns into a brick even after rooting. What step am I missing? I see some roms are touchwiz based. I'm not familiar with what touchwiz is or how to install ot before flashing roms or if I even need it for CM11. Anyone on the same build as me that has flashed several roms I would greatly appreciate any info so I can start to enjoy some of these roms and decide which one I like. Thanks.
Sorry, I haven't done this stuff to know exactly where the issue is, but I will assume you're more likely to get the answer in the development section since it's all about themes, roms, rom flashing, rooting etc. If not there, then the trouble shooting section. Hope that helps. (assuming you're still looking)
You can flash Philz recovery in twrp & switch to it. Then you can flash CM11.
http://forum.xda-developers.com/showthread.php?t=2552655
You can use casual to root and unlock bootloader.... And then install cwm via rom manager apk... Hope this solves your concern
Sent from my SCH-I605 using XDA Premium 4 mobile app
How is TWRP bricking your phone? I rooted with Outler's method and have had no problems with TWRP. You've mentioned that CWM has bricked your phone too. If that's the case, how were able to flash anything at all? As for TouchWiz, it's not anything you install. There are two basic types of ROMS for the N2. TouchWiz based, which have more of the Samsung apps along with the ROM customizations, and AOSP (Android Open Source Project). AOSP is more like stock Android, but with custom features. CM11 is an AOSP ROM. Here are the steps I took when I initially rooted:
Installed Samsung drivers to my laptop
Made sure Java was up to date
D/L Outler's Casual
Put phone in USB Debugging Mode
Attached phone
Ran Casual
Rooted phone (at this point I believe I had to select between CWM or TWRP)
There you have it. If you missed any of these steps, that could be the problem. Another issue might be that you're trying to use TWRP and CWM simultaneously
I'm assuming you are not wiping(factory reset. I do it three times) prior to your install. If you're not then your trying to install a rom on top of a rom and bam...boot loop.
nikhil.kdhand said:
You can use casual to root and unlock bootloader.... And then install cwm via rom manager apk... Hope this solves your concern
Sent from my SCH-I605 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
+1 for this... when i tried to flash CM11 using TWRP I ended up in a bootloop.. restored my backup, downloaded rom manager apk from google play and used that to install CWM... then in CWM did a backup, wipe everything, and flashed CM11 + gapps and everything works without a hitch
one more note... my CWM backup was hanging on generating the MD5 sum, so i changed the encryption method away from the default... takes up more space on the ext-sd, but it works.

Samsung Galaxy Note3 SM-N9005 Android 5.0 - no recovery

Hi All... help...
I have a Note3 SM-N9005 which is rooted. I have been trying to get CWM installed.
I started by using ROM Manager and this just didnt work at all - the recovery partition stayed stock.
So I downloaded the Samsung Note 3 (International) recovery image (6.0.4.6) (non-touch) from https://www.clockworkmod.com/rommanager.
I used Cygwin to convert to a .tar file and then flashed to PDA using Odin.
All looked OK and Odin passed the install - however when I tried to reboot into recovery my Note3 just gets stuck in a boot loop - the only way I could get it working again was to re-flash using Odin and when it reboots it starts and works normally - but if I reboot into recovery mode it just keeps re-booting!!
Any thoughts on how to fix this or whether the best option is to flash a whole ROM with CWM already packed? Alternatively - any ideas on where I can get a CWM file which will work on my Note3?
Also - now this has started getting messy, any advice on backing up EFS (just in case )
Thanks in advance
So you reflashed the whole stock firmware via Odin and recovery still isn't working? Very strange. Rom Manager sucks and has for years now. Why didn't you just grab either CWM or TWRP (which I find way better for most phones) from the subforum for your phone here on Xda?
es0tericcha0s said:
So you reflashed the whole stock firmware via Odin and recovery still isn't working? Very strange. Rom Manager sucks and has for years now. Why didn't you just grab either CWM or TWRP (which I find way better for most phones) from the subforum for your phone here on Xda?
Click to expand...
Click to collapse
Hi es0tericcha0s
Thanks - TBH I have only just replaced my S4 with the Note3 and just set everything up - so didnt want to reflash with a custom ROM so followed the instructions for installing CWM... and failed I did install TWRP a while ago and couldnt really get on with it - if you think it is better I might reflash the whole phone with a new ROM and give it a go.
I think I did download a CWM img file from here and when I flashed it to PDA the phone wouldnt boot at all - from memory I am sure it came up saying it couldnt boot and enetered "Odin mode"... I will have to back up my important stuff and try again tonight.
Any recommendations on a good ROM to play with? Need a stable product ideally as I dont get much time to play
Thanks
I would just restore the entire phone with the stock firmware file and start fresh. TWRP here: http://forum.xda-developers.com/showthread.php?t=2494245 As far as roms, I haven't played with the international Note 3 in awhile, but I typically recommend stock based roms for less potential issues (I personally prefer CM based roms, but I have more time and experience with dealing with possible problems than most). I would take a look at AllianceRom if you want to customize a lot on stock based http://forum.xda-developers.com/showthread.php?t=2571255 or Omega http://forum.xda-developers.com/showthread.php?t=2470441
As always, you should read through some of the stuff other active users are saying about it to make sure it fits your needs, but those development teams support a lot of Samsung devices and usually provide solid updates.
es0tericcha0s said:
I would just restore the entire phone with the stock firmware file and start fresh. TWRP here: http://forum.xda-developers.com/showthread.php?t=2494245 As far as roms, I haven't played with the international Note 3 in awhile, but I typically recommend stock based roms for less potential issues (I personally prefer CM based roms, but I have more time and experience with dealing with possible problems than most). I would take a look at AllianceRom if you want to customize a lot on stock based http://forum.xda-developers.com/showthread.php?t=2571255 or Omega http://forum.xda-developers.com/showthread.php?t=2470441
As always, you should read through some of the stuff other active users are saying about it to make sure it fits your needs, but those development teams support a lot of Samsung devices and usually provide solid updates.
Click to expand...
Click to collapse
Thanks es0tericcha0s - I downloaded the TWRP tar and flashed to PDA - all worked first time... I will give it a go and see how I get on, when I get more time I will do a clean flash too!
Good deal. Lemme know if you need anything else.

Categories

Resources