This patch should help you to fix your Mobile Data connection with new CM9 ROMs.
1. Download the file to your PC/Mac
http://www.mediafire.com/?qecm8haf9iiod6o
2. Extract the zip file
3. Copy the content of ppp folder, to your phone ... /system/etc/ppp/
Recommended tools for doing this stuff is Root Explorer or QuickSSHD
4. Make sure the permission of files is rwxr-x-r-x .... or just run command "chmod 755 /system/etc/ppp/*"
massaint said:
This patch should help you to fix your Mobile Data connection with new CM9 ROMs.
1. Download the file to your PC/Mac
http://www.mediafire.com/?qecm8haf9iiod6o
2. Extract the zip file
3. Copy the content of ppp folder, to your phone ... /system/etc/ppp/
Recommended tools for doing this stuff is Root Explorer or QuickSSHD
4. Make sure the permission of files is rwxr-x-r-x .... or just run command "chmod 755 /system/etc/ppp/*"
Click to expand...
Click to collapse
I have a zip to cwm
All the roms I maintain should have those already. Try aokp build 30.1 the latest gummy or the latest cm9 kang
Sent from my Glitched AOKP Unicorn.
Hello, I tried all cm9 in which data was not working. In stock and other eh03 roms it works. I am on reliance India network, using Verizon fascinate. Btw, I really need to try aosp 31 build. gummy.
Will try this patch. Thanks.
Sent from my SCH-I500 using Tapatalk
stevestone said:
Hello, I tried all cm9 in which data was not working. In stock and other eh03 roms it works. I am on reliance India network, using Verizon fascinate. Btw, I really need to try aosp 31 build. gummy.
Will try this patch. Thanks.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Try it.
http://dl.dropbox.com/u/59704791/Data_fix_ISC.zip
I've noticed a lot of people saying they have problems with data, one thing I noticed is flashing the teamhacksung build 2 will fail the first time and reboot into the newer cwm recovery, try flashing build 2 again and it should finish, let it boot, reboot into recovery, and then flash the ROM you want and then gapps, it should work, I had the same problem you all did until I figured out about the THS build 2 failing, I thought it was normal. But after all that my data has been working.
KANGED AOKP Showcase
Virtuous Prime ATP
erivnocmc said:
Try it.
http://dl.dropbox.com/u/59704791/Data_fix_ISC.zip
Click to expand...
Click to collapse
Thanks. This worked for me.
Edit :- Tested both, 3g get connected you can make outgoing calls again after call disconnection data works. but when it comes to incoming call and after disconnection, data doesnt work.
i tried other patches but same result. for working i need to restart my phone, even airplane mode doesnt help.
In gummy, aosp cm9 rom data doesnt work at all. you need to apply this patch.
Thanks for the patch, I have nobody to set up mobile Internet, all spoke at 5-aokp_fascinatemtd_milestone firmware will not work ... .... you need to go back to the factory firmware from Verizon, and only then will I be able to use mobile Internet.
But installing the patch, all earned!!!!!!!!!
can anybody make a patch for latest cm10 (with a new partition layout)
i normally flash this http://www.mediafire.com/download.php?db9uabad7kog4b4 from cm9 until jellybean (before changes in partition layout)
i can move manually the file and set permission. but it would be awesome if i can flash this after flashing ROM. i don't always have wi-fi around. and i rely on my data plan
A-L31 said:
can anybody make a patch for latest cm10 (with a new partition layout)
i normally flash this http://www.mediafire.com/download.php?db9uabad7kog4b4 from cm9 until jellybean (before changes in partition layout)
i can move manually the file and set permission. but it would be awesome if i can flash this after flashing ROM. i don't always have wi-fi around. and i rely on my data plan
Click to expand...
Click to collapse
Data fix cm10
erivnocmc said:
Data fix cm10
Click to expand...
Click to collapse
Sweeeeeetttt!!!!
i havent seen this issue yet but i live in the states mine and my sis phone on vzw and my gf is on straighttalk with her fassy and no problems
Kaptinkrunk said:
i havent seen this issue yet but i live in the states mine and my sis phone on vzw and my gf is on straighttalk with her fassy and no problems
Click to expand...
Click to collapse
I believe this issue is just only for user from outside us..
Sent from my SCH-I500 using Tapatalk 2
Related
this is a port of several different compatible miui builds from the miui.us {thanks guys for everything}
http://forums.miui.us/content.php
used jokers cm9 as a base {and of course the MAN {joker} who without him none of this would be possible}
found here: http://forum.xda-developers.com/show....php?t=1413349
making good use of the guides on the xda especially prox guide {thanks prox}
found here:http://forum.xda-developers.com/show....php?t=1499411
Stevendeb25, Magiman7, Jokersax11, Th3Bill, Bytethegroove, and myself:
- { Team-Moto-Tegra } -
would like to present to you:
MIUI/ICS V4. for the Motorola Photon
Unlocked photons only!!!!!! Must be on 198_7 or 198_6 and have your bootloader unlocked thanks
Instructions:
* aroma installer process: { works for fresh install or updating } [ thanks th3bill for cranking it out for us ] {DO NOT WIPE BEFORE FLASHING}
reboot to recovery, flash the aroma installer zip (its not named aroma installer), choose you options, follow the promts...... and thats all to it....... have fun
*romracer & joker recovery process:
* fresh install process:
reboot to recovery use jokers recovery cwmv3
use th3bill's wipe all zip ...... or
format system, data, cache
flash rom, flash rom a second time, flash photon gapps, flahs kernel provided in the op, fix permissions, and then reboot phone
* to flash over/update:
use th3bill wipe cache zip ..... or
wipe cache and dalvick cache
flash rom, then flash rom a second time, flash photon gapps, flash kernel provided in op, fix permissions, and then reboot phone
* if you run into some fc's reboot into recovery wipe dalvick cache and fix permissions the reboot phone
*unless posted as not working you can assume it works until you test for yourself. if you find something unreported as not working please post so i can add it to the op and if you find a fix for it please do the same and i will include it to op and in builds as well as credit you for the find
THANKS!
known issues:
themes not 100%
if choosing xperia launcher you need to choose another launcher to go with it.. it doesn't play nice being alone with miui home
MIUI DOWNLOAD LINK
* looking for people t o create a custom logo for our team please pm bil or myself with ideas or even submit your work.....thanks
*Please report any and everything and as always please make a backup before flashing
* also a big thanks to qbking77 for putting together review and how to videos for us his channel can be found here: http://www.youtube.com/user/qbking77/featured
how to video:
http://youtu.be/JGYJJqNbz80
review video:
http://youtu.be/dGr9bYUsa2E
Tips/tricks/fixes/links
Tips:
*Screenshot: hold volume down + menu
*status bar settings: click the three dots in the notificaton pull down ( thanks luckypunk)
*some apps we list will not just install or flash use a root file explorer like root explorer copy the app into system/app give it same permissions as the other apps in system/app then reboot you will get a message about android upgrading and you will have the new app you are wanting to install
*if you are replacing a system/app with one of these rename the original .bak so if something is wrong you can just delete the new apk and delete the .bak extension reboot and all is well
More tips here
http://forum.xda-developers.com/showthread.php?t=1502440
and here
http://en.miui.com/a-10.html
Battery:some are complaining of battery life...so i thought id add a section to maybe help out with it. not promising that any of these will miraculously make you get any amount of extra life just commonly used tips
turn off auto-brightness and lower it
turn off wifi,gps,bluetooth, and sync when not using it
turn off auto-rotate when not using it
make sure you exit out of programs when available so they dont run in the background
try using themes with darker colors some say the darker the better pulls less battery (opinion not fact so dont flame me here....)
go into apps and set the sync time on your accounts to sync less frequently
set screen off time to be lower
turn off haptic feedback, sound on touch, sound on lockscreen
try flashing a cm9 kernel and underclocking it and/or undervolting it
turn off some or all animations
try calibrating the battery
do research on software you install and use. delete apps you don't use, expecially antiviruses or other stuff that launches all the time
if all else fails set the phone down and walk away slowly.........
link for oleg/peter kernel for cm9/miui:
http://forum.xda-developers.com/showthread.php?t=1520417
this is based on jokers cm9 so in theory the fixes and tricks for it should also apply on my miui
cm9 fixes thread: (thanks th3bill and all for putting these in one spot)
http://forum.xda-developers.com/showthread.php?t=1514963
coming from miui on one hell of a mopho
Can't wait to try, everyone says good things of MIUI but wasn't an ICS one I was comfortable enough with to install.
Can't get usb or bluetooth to work. Says roamming indicator off. Running very smooth and fast. Great job!
spleef said:
Well Ive used jokers latest cm9 as a base and used the many guides in the xda mostly prox and gannon to port the atrix miui for the photon. Is late so no link or complete thread setup yet but file already uploaded and ready to downnload.
Working:
Data (3g,2g)
Sms, mms
Phone
Wifi
Camera
Miui themes (mostly working)
Tons more
Not working:
You tell me
Instructions:
Link:
Please report any and everything
coming from a miui on on one hell of a mopho
Click to expand...
Click to collapse
You damn tease...the excitement of a MIUI Rom and no link....its like the date with the hot chick that shows her cleavage all night...but you have to wait till the 3rd date for a nipple.. lol...can not wait to download...
Sent from my MB855 using xda premium
COOL， can't wait to have a try.
Ok replaced the eri.xml file in framework-res.apk with the one from this thread http://forum.xda-developers.com/showthread.php?t=1403322&page=11 and now it says sprint for provider. Still can't receive mms. Tried changing apns but no go. Go sms works though.
bricky23 said:
Can't get usb or bluetooth to work. Says roamming indicator off. Running very smooth and fast. Great job!
Click to expand...
Click to collapse
If usb gets up and running it might become my daily driver.
My suggestions. For usb, include usb.apk from some older versions of cm9. It's needed for cm9 too. Don't know why it's not included. And for bluetooth, try additional kernel from oleg and me.
What about gapps? Or we can use Jocker's?
s1yder said:
What about gapps? Or we can use Jocker's?
Click to expand...
Click to collapse
Gapps are in it already.
Sent from my Motorola Electrify using Tapatalk
No need for gapps just flash the spleefiuitest1 zip and run will have to download/restore your user apps planning on adding titanium for quicker restores next build of course miui has a builtin backup but I don't know how it works soooo....
coming from miui on one hell of a mopho
peetr_ said:
My suggestions. For usb, include usb.apk from some older versions of cm9. It's needed for cm9 too. Don't know why it's not included. And for bluetooth, try additional kernel from oleg and me.
Click to expand...
Click to collapse
Confirmed flashing Oleg and Peetr kernel fixes bluetooth.
Sent from my MB855 using Tapatalk
Thats great **** there
Sent from my DROID X2 using xda premium
Can anyone confirm if GSM is working or not on this rom?
Sent from my MB855 using XDA
Supergoodsmitto said:
Can anyone confirm if GSM is working or not on this rom?
Sent from my MB855 using XDA
Click to expand...
Click to collapse
Try gsm fix in cm9 fixes and report hack
coming from miui on one hell of a mopho
How's GPS looking?
qbking77 said:
How's GPS looking?
Click to expand...
Click to collapse
Locks in quick in maps just tried it
coming from miui on one hell of a mopho
Any luck receiving mms? Only way for me so far is go sms.
Sent from my MB855 using Tapatalk
miui
hey thanks a bunch for rom! never used miui much, but as im a big fan of cm, but wanted to try and help with testing. so far its very smooth and i've had little errors
get com.android.phone fc or whatev when its started up... got a couple boots. when i hit music it FC's, mms not working, and roam message for me as well....still testing will report back.
HELLO!,
this is a port of the aokp rom found here {can view the changelogs here as well}
put into jokersax11's cm9 found here: http://www.jokersax.com/
MAJOR THANKS TO ALL INVOLVED IN MAKING AOKP AND CM9 WITHOUT THEM DOING THEIR THING WE COULDNT DO OURS!!!
Brought to you by
TEAM-MOTO-TEGRA
instructions:
* fresh install process:
reboot to recovery use jokers recovery cwmv3 http://www.jokersax.....enmod9-photon/
use th3bill's wipe all zip: found here...... or
format system, data, cache
flash rom, flash rom a second time, flash gapps, flash kernel provided in the op [optional], fix permissions, and then reboot phone
* to flash over/update:
use th3bill wipe cache zip : found here..... or
wipe cache and dalvick cache
flash rom, then flash rom a second time, flash kernel provided in op [optional], fix permissions, and then reboot phone
* if you run into some fc's reboot into recovery wipe dalvick cache and fix permissions the reboot phone
Current build: based on jokersax cm9 6.9.2 and aokp build-38
Not Working:
themes not functioning will make you go into bootloops
you tell me
aokp-sunfire link
goo-inside.me link
flash this to keep up to date with the latest releases, search for spleef when inside the app
__________________
Awesome. Good work as always.
questions comments please feel free to pm me or send an email to my address listed in my profile.... thanks guys
Holy ****. Milestone 5? **** yeah
b4ifuru18 said:
Holy ****. Milestone 5? **** yeah
Click to expand...
Click to collapse
I'm on it now running great even weather sticks after reboot just click the date in pull down you will see message saying updating weather give it a few you will see it back only a few buggers left
few more changes coming guys. bill and I are being hosted on jokers site so will have new links soon
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
This rom is cool as hell... Ran it since last night. but I can't get passed the unicorn... pink, at that. How am I supposed to show off my phone on a construction site... without getting killed for having pink unicorns all over my phone ?
tetrabyt said:
This rom is cool as hell... Ran it since last night. but I can't get passed the unicorn... pink, at that. How am I supposed to show off my phone on a construction site... without getting killed for having pink unicorns all over my phone ?
Click to expand...
Click to collapse
lol too funny im a painter myself so i feel your pain there...in general ui in rom control it has disable bootanimation box you can click but use at your own risk idk what may result from it
Flashed successfully.
Things i've noticed - stock sms stops at 160 characters won't let me type more.
Auto brightness not working on my end.
b4ifuru18 said:
Flashed successfully.
Things i've noticed - stock sms stops at 160 characters won't let me type more.
Auto brightness not working on my end.
Click to expand...
Click to collapse
check in settings for auto brightness and sms as well look in settings enable the longer limits
I haven't tried this for the Photon yet, but disabling boot animation on the Touchpad simply gets rid of the unicorn animation and replaces it with a more generic boot animation.
Better if you don't want your homophobe buddies to see =P.
Just download the droid razr boot animation zip and replace in /system/media. Or use one of my cm9 ones .
Sent from my MB855 using Tapatalk 2
big cm9 update coming so aokp updating soon
MIUI/ICS for the Photon
http://forum.xda-developers.com/showthread.php?t=1536161
I found a few things that aren't working right. the Performance option FC's Rom Control every time when you try to open it, not sure what all options are in there.
The boot tweaks does open and items are selectable however after you leave that screen the settings revert, there is no way to save settings.
And finally I was not able to find where I could change my default storage settings between internal sd and external sd.
Moguledyouth said:
And finally I was not able to find where I could change my default storage settings between internal sd and external sd.
Click to expand...
Click to collapse
I think that's a cm feature.
Sent from my MB855 using Tapatalk 2
AKDMA said:
I think that's a cm feature.
Sent from my MB855 using Tapatalk 2
Click to expand...
Click to collapse
Its parts of the sunfireparts.apk that joker made. Its included in this rom and several other ics roms, it just doesn't work.
Sent from my MB855 using xda premium
Moguledyouth said:
I found a few things that aren't working right. the Performance option FC's Rom Control every time when you try to open it, not sure what all options are in there.
The boot tweaks does open and items are selectable however after you leave that screen the settings revert, there is no way to save settings.
And finally I was not able to find where I could change my default storage settings between internal sd and external sd.
Click to expand...
Click to collapse
performance is a known bug check op.. but what it does can be accomplished with most over clocking apps from the market..
the boot tweaks I will look into I'm going to try to see for myself if it works... if not I think I know already what to do.....
the storage is cm9 this is aokp so the options wont be exactly the same... however it can be edited.... but I have limited time to do these things so the storage pretty much will be set to default until I can get it done..... sorry
Sent from my MB855 using xda premium
Considering you were unable to find it and it's the settings menu in CM, I think the question has been answered. It not working would imply you found a setting, tested it and it didn't function.
OP UPDATED to sync with jokers latest cm9 .60...enjoy follks
You guys are relentless; ROM updates are pouring in!
Thanks!
Is it just me but the latest build not download?
Sent from my MB855 using XDA
OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe
I'm gonna give this a try tonight. Thanks!
Sent from my SCH-I545 using XDA Premium 4 mobile app
Awesome work! already running the SS restore version and its excellent! I'll give the zip install version a whirl and see how she looks.
new vers
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!
gigilie said:
Gator Brah this is the V19 are u the 1 download i saw that SS restore was sitting idle on ah for a cpl weeks. if the zip doesnt work or give you a nice looking version try the new SS restore v19 just posted link here for it. thanks guys!
Click to expand...
Click to collapse
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no go
Hopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too
+1 using foxhound. I love that ROM but am having the same problems as above. Won't connect to work network and keeps searching and obtaining IP address but never connects and kills battery. Used data on way home for maps and signal said 4g but Google said not connected had to switch back to stock and all was fine...shame cause I love foxhound.... Using ss 3.71 on MK2
Gator Brah said:
Hey man one thing i've noticed with this rom (both SS and zip options) as well as your other rom M1A3, Wifi seems to have trouble maintaining a stable connection. It tends to drop off and i find myself having to toggle it every so often.
The other issue is also with wifi, when i try to connect to an access point using 2 phase authentication (WAP + PEAP) it will accept the credentials, pass verification but never receive the IP address. It then just bounces back and forth between scanning for wifi networks and trying to obtain an IP address from the access point....which kills the battery.
I can connect to the very same access point from the stock rom.
I've tried flashing the modules, replacing the modules with the ones from the stock rom, as well as replacing the wap_config.conf file from the working rom slot. no goHopefully you can clue me into a fix. Im on MJ7, I have seen this problem come back after i re-flashed my image with Odin. its definitely related to these roms in particular
Other than that i really like both of these roms. the gold theme on M1A3 is pretty cool too
Click to expand...
Click to collapse
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
sure i'll do testing on that. I wont be back at work until monday to test out the wifi though.
Loaded this rom via safe strap restore with no issues. Working on getting everything setup. No issues encountered to this point
No issues with wifi...
Sent from my SCH-I545 using XDA Premium 4 mobile app, but battery life is horrible. Sitting overnight went from 70% to 12% this morning.
gigilie said:
hey thanks for update. im wondering if youd try a couple options for me flash them see if they do anything to improve this? i havent had this problem but I tether mostly going to try and figure it out try this first and use in combo with this if it doesnt work at all then remove with this
Click to expand...
Click to collapse
So the first fix didnt change anything unfortunately. Flashed the second zip and on reboot had a ton of FC errors and couldn't even unlock the screen. Restarted again and it was pretty much soft bricked...had to restore from backup.
Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk
Alxoom33 said:
Flashed zip in twrp, loaded great no serious problems. Only issue is that it keeps trying to encrypt my SD card. I am concerned about losing data. Please advise how to stop encr. I have been rebooting and took out card. Any suggestions? Thanks.
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk
Alxoom33 said:
Edit: reflashed. Note wifi does not work, reflashed latest 1/17 Ktoonsz kernel, wifi works but now starts trying to encrypt SD card again...?
Sent from my Xoom Wifi using Tapatalk
Click to expand...
Click to collapse
it shouldnt do anything to an SD card
Thanks, re flashed and fixed issue.
Sent from my SCH-I545 using Tapatalk
I thought it would be helpful to share my post from the Foxhound thread on installation of Omega on MDK http://forum.xda-developers.com/showthread.php?p=49744674
[ROM]Foxhound Diamond Dogs 3.6 TW-4.3-MK2/AnyCarrier-SS-KNOXfree-CLEAN-FAST-THEMED
Gigilie, I would be happy to walk through Omega instillation on MDK. It's very easy.
Before you start make sure you downloaded Omega. v. 19. I used the .zip version and reccomend flashing .zip for all MDK recovery based installs. Also dl the most current ktoonsz 4.3 tw kernel. The version in Omega did not work well and a fresh install is best. Also dl any mods you like, such as those you might use with HD or other 4.3 TW roms.
1. Using recovery, I use TWRP 2.6.3, be sure to make a back up nandroid of your current rom.
2. Wipe. A full factory wipe is best.
3. Flash Omega v. 19 and the new ktz kernel and wipe cache and Calvin for good measure (not absolutely necessary).
4. Reboot, set up and give the rom some time to set up and load your backuped apps from the playstore.
5. Go back to recovery and flash your mods.
If you are brave or foolish, restore only the data from your 4.3 or 4.2 TW Nandroid.
If you start getting fc's then wipe data, and reload your data and apps manually from the playstore and or from Ti backup. I found that data from my HD 12 Nandroid was compatible with Omega. I was using the S4 UI in HD v. 12, not the Note 3 UI; and data from other setups may not play well with Omega v.19.
That's it. Easy peasy. Have fun!
Sent from my Xoom Wifi using Tapatalk
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
Actually it was with MDK. For MJ7 you need Safestrap.
Sent from my Xoom Wifi using Tapatalk
lazepr said:
Happy to see another rom working with MJ7 ^^. But I do not see the Omega settings
Click to expand...
Click to collapse
they should be there... if not grab the apk from the play store
i chek in on this bad boy everyday or every few at least and with over 550 downloads (thousand views) and only 2 pages for a thread this rom must be pretty damn stable otherwise thered be floods of ppl i think? anyway thanks for trying it guys please post some ant benchmarks with pics in here or any of my roms i'd appreciate it the whole Unmatched quote in HD bugs me as all my roms score higher and are faster and work just as well on battery so i dont know what their talking about just want confirmation of this plz guys
gigilie said:
OMEGA v19
FIGURED WITH INDIE RELEASING HIS 4.4 LEAKED ROM I had better let you guys enjoy it a bit before the v20 4.4 and an unloked bootloader port heh, joking probably wont see her for a bit boys and girls so enjoy what you can while you have it. btw thats 4.4 that triggers knox but ima try it later since I've triggered it messing with SS trying to get zips working for people over last cpl weeks... im sure well see 4.4 tw soon enough til then enjoy.
This is a follow up to my v18 ROM any problems or issues try first searching that thread for info then post issue or problem herein v19's thread please.. http://forum.xda-developers.com/showthread.php?t=2591648
thanks testers of my original port v18. of course ...indie... genius and the rest of the omega crew. thx ppls
like all my new roms this is multicarrier friendly meaning you might have to flash your modules and possibly modem and apns to get full service but its very easy to do and nearly all files possibly needed for this conversion are available at http://www.androidfilehost.com/?w=devices&uid=23269279319201630 along with various other mods and rom ports.
Installing is straight forward: zip is for slots 1-420 and the restorable install is for any slot including STOCK!!!
And this wont hurt your phone or leave incompatability issues like other SS roms may have done. Plz post problems issues here not on indies or any other omega forum. Thanks must be given to indie and anyone he says I just ported this one was the easiest one I've done and has been 100% successful for everyone I personally installed for. Be sure to +thank me or indie or Download another rom.
Install by running zip from Safestrap or TWRP. Untested on CWM. After installing if not a MK2 VZW user you will have to flash your Safestrap modules and modem and apn if all else fails. This installs the best on a fresh rom slot ie newly created / blank.
Zip DL:
http://www.androidfilehost.com/?fid=23311191640114279
SS RESTORE DL:
http://www.androidfilehost.com/?fid=23269279319202601
Install: unzip the backup files in the zip to a folder like /TWRP/backupsi/141fa3db/ndie-Omega19bygogolie no matter where the files need to be one level in a directory named something and your TWRP/SS backup directory needs to read from that location if you cant figure this out you probably should not be installing a custom anything. Once files are where you want them pop into SS/TWRP and restore these to any slots butt even STOCK. yay ok bed time ill update and make pretty maybe later.
I HIGHLY RECOMMEND USING THE RESTORE VERSION OVER THE ZIP. PERSONALLY I THINK ITS SAFER MORE COMPATIBLE WITH ALL PHONES WITH 3.7+
hi haters.
thx wip testers and omega crew clans. thx again hashc0de and surge ur my heroes your works been a godsend
Omega v19 Opening Post
Changelog:
Based on firmware XXUEML6 Android 4.3 (Date: 19/12/2013)
Kernel talexop v1.3
New:
Notification Manager by RYO Software - Omega Rom users can monitor 3 apps instead of 1, thanks and credits to bartito for this gift to us
Added:
Google Drive
18 new csc to Omegas Multi csc
Updated:
Kernel talexop v1.3 with MKF ramdisk
Accounts Sync Profiler
ChatON
Dolphin Browser
Flipboard
Tripadvisor
Rom is Deodexed + Rooted + Zipaligned
Rom is No Full Wipe
Click to expand...
Click to collapse
Failed due to "no partition selected." I noticed on second try that the usual check box partition options was blank. I tried mounting all the partitions to no avail. Please help--thanks
Edit: I forgot to mention it is the Restore version.
After trying to install safestrap to my verizon note 2 for many times with failure.
Today suduenly i tried again to reRoot my my ND7 android 4.4.2 note 2 with locked bootloader and try it again
i used ghettoroot-v0.2.2 within the attachment and after rooting and before installing safestrap i went directly to google play store
and updated my super su and after the update i launched super su and it asked for if i want to upgrade the su binary and i did
and after the reboot i installed safestrap and magic happend it is working and i do not have any idea what happend it is working
I tried to install this rom called - DN3 (Ditto Note 3) ROM from E-team and at first i create a rom slot and flashed over it but it failed to start and that is when i decided to flash over the stock slot and it worked ...
so all you need to do is
1 - root using ghettoroot-v0.2.2
2- update you super su
3- update su binary and reboot
4- install safestrap and reboot to it
5- wipe cach and dalik cache
6- flash the DN3 rom without removing the boot.img since their is no need for that .
7. your device got a new life
you can confirm from the screenshot below and have nice time every one
i added the updated super su apk within the attachment
#Wifi Fix
For those facing wifi problems with dn3 rom i have managed to solve that by using some files from aliance 4.4.2 rom
i copied the following files from alliance 4.4.2 rom to the dn3 zip file before flashing and wifi is working now
1 - i replaced the files directly within the /system folder not touching the the folders or sub files within the folders just the files directly within the /system
and wifi now works on dn3 (ditto)
Your phone is not a verizon GN2. You have a GT7105 which is the GSM model. This method still does not work for us.
jollybluehornet said:
Your phone is not a verizon GN2. You have a GT7105 which is the GSM model. This method still does not work for us.
Click to expand...
Click to collapse
My Phone is Verizon SCH-I605 note 2
what you see in the screenshot is the result of installing dn3 (ditto )rom cause dn3 rom was ported to work on SCH-I605 without changing the build.prop
this method is completey working
Then I am mistaken. My bad
Hello guys, then the method works, just that I've done with the root Ghetto Root and it worked the same !!!
Nice so it works?
Sent from my SM-N910V using XDA Free mobile app
So, yes it does work. However, I am now stuck on Ditto3 with no wi-fi, a very slow 4G connection, no safestrap, and I cannot get back to stock ROM to try to reflash Ditto3 until I can get some wifi up in this.
What can I do now?
TheJOJ said:
So, yes it does work. However, I am now stuck on Ditto3 with no wi-fi, a very slow 4G connection, no safestrap, and I cannot get back to stock ROM to try to reflash Ditto3 until I can get some wifi up in this.
What can I do now?
Click to expand...
Click to collapse
you have to root your ditto 3 the same way you rooted your nd7 and update your su and su binary and install safaestrap then you will be able to flash another rom i have updated post #1 you can find the new su within the attachment
i am still trying to find a way for the wifi to work
i will be trying this rom : [Rom][4.4.2] AllianceRom_VZW Build 30 - 32 Themes [11/29/14][Fully Customizable][ND7]
and hope wifi works out of the box , i will report later
iamakrem said:
you have to root your ditto 3 the same way you rooted your nd7 and update your su and su binary and install safaestrap then you will be able to flash another rom i have updated post #1 you can find the new su within the attachment
i am still trying to find a way for the wifi to work
Click to expand...
Click to collapse
Excellent! Got it. Now using Alliance ROM 4.4.2 Build 30. Everything is checking out so far. I have a question still, however. Why is it that these larger - in file size - ROMs (like Ditto 3 and Alliance) work, but the smaller ones such as Liquid do not seem to work?
TheJOJ said:
Excellent! Got it. Now using Alliance ROM 4.4.2 Build 30. Everything is checking out so far. I have a question still, however. Why is it that these larger - in file size - ROMs (like Ditto 3 and Alliance) work, but the smaller ones such as Liquid do not seem to work?
Click to expand...
Click to collapse
Those roms that are not working need their own kernel which we are not allowed to flash using safestrap since we have a locked bootloader
safestrap allows as to flash roms but not kernels ... so i belive almost only any rom that is compatible with the nd7 kernel will work
One other question. I wiped everything but MicroSD, and System on Alliance. I seem to be getting some hitching in the performance every so often, and fairly high RAM usage with no easy way to clear it like in stock 4.4.2 in taskmanager. Could the hitching be linked to the skipping of the "system" wipe, or to the RAM? Was I supposed to wipe system?
For those facing wifi problems with dn3 rom i have managed to solve that by using some files from aliance 4.4.2 rom
i copied the following files from alliance 4.4.2 rom to the dn3 zip file before flashing and wifi is working now
i am not an expert and that is why i cannot specify the file that had solved the problem but i will list all the files i replaced down
1 - i replaced the files directly with the /system folder not touching the sub files within the folders just the files directly within the /system
and wifi now works on dn3 (ditto)
Works well now
No problems on Alliance
Hi guys, we need to change what files in / system to operate the Wifi? No one has described in the thread!
Anyone answer this please?
Sent from my SCH-I605 using XDA Free mobile app
HELP!!!
TheJOJ said:
Excellent! Got it. Now using Alliance ROM 4.4.2 Build 30. Everything is checking out so far. I have a question still, however. Why is it that these larger - in file size - ROMs (like Ditto 3 and Alliance) work, but the smaller ones such as Liquid do not seem to work?
Click to expand...
Click to collapse
How did you get Alliance to work? I flashed it 3 times using safestrap and nothing.
Takiyon said:
How did you get Alliance to work? I flashed it 3 times using safestrap and nothing.
Click to expand...
Click to collapse
Well, first I flashed Ditto 3, then flashed Alliance, but noticed some weird things going on with the UI so I went back, wiped System in addition to Cache, Dalvik Cache, then reflashed it. I still have been having issues with the system-wide lag. It is especially apparent when typing with the keyboard, and changing the keyboard did not help.
Let me know if that helps. Also, make sure you are flashing over the stock slot.
This worked great thanks for the tip on the WiFi. For those that weren't clear what worked was: download alliance rom and dn3 rom, open file explorer one window for each rom, go to system folder scroll down and replace only the available files not folders (in build prop etc) into the dn3 rom
Sent from my SM-G900F using XDA Free mobile app
benfikaman said:
This worked great thanks for the tip on the WiFi. For those that weren't clear what worked was: download alliance rom and dn3 rom, open file explorer one window for each rom, go to system folder scroll down and replace only the available files not folders (in build prop etc) into the dn3 rom
Sent from my SM-G900F using XDA Free mobile app
Click to expand...
Click to collapse
Hi, I understand but what files should I replace? Be more specific please?
This is a prerooted stock ROM of the OK2 update. It also has the sd card fix patch applied.
This ROM requires installing a custom recovery on your device, which will trip Knox.
All operations are done at your own risk
I would advise against flashing the EFS partition unless you know yours is corrupted (i don't think many people have that issue). The Boot, System, and Modem partitions all need to be flashed though.
If installing over Kitkat, a factory reset will most likely be required as lollipop installs apps differently. Also be prepared to lose all files on internal memory.
I would recommend backing up your OS before flashing. Also it wouldn't hurt to backup app data to make reinstalling apps easier.
Here's the thread for twrp:
http://forum.xda-developers.com/note-3-sprint/general/how-to-root-note-3-lollipop-t3089382
To install the ROM, extract the 7zip file to "/ExtSdCard/twrp/backups/{serial number}/"
using your favorite software (I made the file with ES File Explorer on Android).
Enter recovery mode (Volume up + Home button while poering on), and select "Restore" from the list of options.
There is a option to select internal or external storage to Restore from.
Select the OK2 stock rooted backup file. (Un)Check the appropriate boxes.
Restore the image to install the new OS
Here's the ROM
https://drive.google.com/file/d/0B2iEgzRTFjrQdzNBa29DMTBsZHc/view?usp=docslist_api
I don't suppose you have another link? It fails to download every time I try.*Edit* I didn't have drive installed just flashed cm nightly forgot to install it :silly: thanks. And keep up the good work!
Not right now. I know youl'll receive two or three different errors, but you gotta click "continue" or "download" or "download anyway" to get the file. If it continues to be a problem, I can setup a torrent server for it when i get home tonight.
It might also help to download to a pc, or on a Wi-Fi connection. I've had issues with downloads failing to complete using my phone with big files.
Is there a way to change the launcher to 5x4
phat0074 said:
Is there a way to change the launcher to 5x4
Click to expand...
Click to collapse
I do not know if there's a way to do so with to do so with TouchWiz, since I haven't used it since before the Kitkat update.
I've been using Go Launcher EX for awhile now instead, and it supports that feature.
@Greaper88
Is hotspot works with this backup ?
vipsy6 said:
@Greaper88
Is hotspot works with this backup ?
Click to expand...
Click to collapse
I do not know. I use a third-party app for my hotspot. If you have hotspot services with your provider, the native one should work, but I have not tested that theory.
If you're not signed up for hotspot services, check here:
http://forum.xda-developers.com/showthread.php?t=2796994
or the "Wi-Fi Tether Router" app on the play store works very well for me (since this is a rooted ROM):
https://play.google.com/store/apps/details?id=net.snclab.wifitetherrouter&hl=en
Just have to remember with that app to turn the device's Wi-Fi on before activating the hotspot.
Is anyone else having wifi calling issues with this rom? At first I got the error 16 switch message when trying calls of any kind off wifi, but wifi calling worked. Then I called sprint and they worked their magic to correct the error 16 message but I've had wifi calling issues ever since. Calls start and immediately drop on wifi calling.
jamesdoubledean said:
Is anyone else having wifi calling issues with this rom? At first I got the error 16 switch message when trying calls of any kind off wifi, but wifi calling worked. Then I called sprint and they worked their magic to correct the error 16 message but I've had wifi calling issues ever since. Calls start and immediately drop on wifi calling.
Click to expand...
Click to collapse
I personally never had that problem. But I did notice if I tried to download a big file, or other devices on the network were using a LOT of data, the Wi-Fi calling would disconnect. Sometimes using the Bluetooth could cause problems since it uses the same antenna as the Wi-Fi... But I only had issues with that when transferring data with one or the other.
Yep, I know it can be picky, I have used it for years. This is the first time is disconnects immediately on every wifi call. Nothing has changed on my network. Comcast 75mbps, wireless AC router. It started with this rom, which by the way I love otherwise.
For sprint note3?
I cant get file to unzip
Am i supposed to be able to do this on my phone without a computer?
Ok. Got it to unzip with 7zip but wouldn't install do i have to overwrite a dated back up or just extract in twrp ? Any help would be great im without a computer and my phone is on crack after sprint updated my plan
Sent from my SM-N900P using XDA-Developers mobile app
ant76 said:
Ok. Got it to unzip with 7zip but wouldn't install do i have to overwrite a dated back up or just extract in twrp ? Any help would be great im without a computer and my phone is on crack after sprint updated my plan
Sent from my SM-N900P using XDA-Developers mobile app
Click to expand...
Click to collapse
If you have successfully unzipped the file while the device is in normal operation. Then after you have booted into recovery mode (twrp) you should be able to locate the unzipped file with twrp. If it doesn't flash (Install) then something else is wrong. Is your phone already rooted ? If so what OS are you running now ? If not, You may want to root with supersu first. Do you have an SD Card installed in your device? If so, using a root file manager app like Root Explorer copy and paste the unzipped OK2 OS file to the Sd Card and boot back into twrp recovery and locate the unzipped file and flash from the SD Card.
ant76 said:
For sprint note3?
I cant get file to unzip
Am i supposed to be able to do this on my phone without a computer?
Click to expand...
Click to collapse
This requires a custom recovery. I used TWRP to make the backup, and used ES File Explorer to zip it. If you don't have a custom recovery, you need a computer to install one. There is a completely stock ROM available if you don't want to trip Knox and keep your device completely stock, but that does require a computer.
Ok i ill try it again when im in better service i thought i had to put it in my backup folder
Sent from my SM-N900P using XDA-Developers mobile app
Optimizing apps has been rebooting forever the last one has been going close to 50x is this normal I'm about to just stop it
ant76 said:
Optimizing apps has been rebooting forever the last one has been going close to 50x is this normal I'm about to just stop it
Click to expand...
Click to collapse
It took mine a good ten to fifteen minutes at least to go through all that.
Did you remember to clear your Dalvik and cache?
Moved to Android Development since that's where this technically belongs.
garwynn said:
Moved to Android Development since that's where this technically belongs.
Click to expand...
Click to collapse
How does it belong in development when there is no development, nor has there been, any development going on in this thread? People needing help and asking basic questions doesn't count as development.
Restore or install?!?!
I have seen people say to "restore", "install", and/or "flash" this file. These are all options in TWRP. Which is it?