Tmobile t959 samsung galaxy s vibrant
Hey guys, I had version 2.2 on my phone. I had this phone for about 1.5 years so I figured, why not update a custom flash?
Anyways, so I googled a friendly newbie guide, as I have no experience with phones. I used odin with a custom flash and it failed giving this message:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> cache.rfs
<ID:0/003> modem.bin
<ID:0/003> factoryfs.rfs
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Now I cant use my phone at all. I can get back into downloading mode, with the yellow android shoveling, but no matter what i load for a rom file, it always gives me an error. I tried searching endlessly, and I cant figure anything out.
Please, someone, I would really appreciate it if i could get some help. Is there anything I can try? This didnt work from the start...I first thought it was my usb drivers i even updated them but I dont know why I keep getting this fail error message:
Can a mod please delete this? I was doing the stupidest mistake...I was selecting file under PHONE instead of PDA....and I just saw in a youtube video someone selected PDA....as soon as I did that it worked!!!
really bricked phone is solved only by service tools
is not bricked because a really bricked phone will not boot in download mode it's like dead better is to say "is not booting" and the way to solve a "bricked" phone is to flash a stock rom that surely works you have to try many times because you don not know what rom was previously on the phone
1.get a stock rom on sammobile
2.also get corresponding Odin an pit file from there
3.flash by Odin in download mode
if not working try another rom also check if you have Android SDK an Kies make sure you have these tools- you need adb interface working and samsung drivers installed
when in download mode open Device Manager start/run/devmgmt.msc and check if you have adb interface active if not install Odin and SDK then restart PC and try again in download mode...
(don't do anything until you see something like this is Dev Manager -you see this only when phone is connected to PC yes in download mode)
tips
-pit file tells Odin how to flash files on phone in what order and how to so unpack rom and check if you see at least 3 md5 files : CSC/Modem/PDA not all roms are complete don't use a pit file until you have these 3 files in archive
-if Odin says "done" but phone is not booting try to enter recovery and (should work if you downloaded a complete rom ) ...and wipe data/cache/Dalvik-cache then reboot
-if you see ADB Interface connected in Dev Manager it means your phone is in download mode and is not bricked so can be solved ! do not believe me just try !
-if you do not see this install (again) everything/ use another computer and try again! if you don't get a sign this is bricked and send it in service don't lose time
Related
Yesterday, I installed FFC, and wanted a fresh install so I formatted sd and tried to flash JI6 with it, but flashing failed and whenever I boot, I get the phone icon with dotted line to a computer icon which has an orange exclamation icon in the middle.
The button-based boot into download mode failed. So I made a jig using a microusb plus 120k, 180k, and 1k resistor. But the method still only boots into the same orange exclamation icon from phone to computer icon. It sounds like it's completely bricked. Is there a snowball chance that samsung would still fix this?
Help would be appreciated.
Thanks, Paul
Okay, there are two methods to fix this: first method is more reliable.
First download Samsung Kies, this gives you correct drivers and makes sure you never have a flash that gets interrupted because of bad drivers. Here is the link to samsung kies:http://downloadcenter.samsung.com/content/SW/201101/20110124222256530/Kies_Mini_For_Vibrant_11011_4.exe
1. Now, take out your battery
2. Put the USB cable that is connected to the computer in.
3. Hold down the two volume buttons while keeping the USB cable in
4. Put the battery in while USB cable is in and volume buttons are still held
5. You should find yourself in download mode.
6. Now, put the pit file I have at the end into PIT and the Tar file I have at the end into PDA, happy flashing.
Second method (unreliable but easier)
1. Install Samsung Kies.
2.Having Odin open, plug in your phone into the cpu using USB cable.
3. Hope that Odin recognizes the device, if it does be happy and flash.
4. Now, put the pit file I have at the end into PIT and the Tar file I have at the end into PDA, happy flashing.
FLASH JFD INSTEAD OF JI6 TO GO TO STOCK, JI6 HAS ALWAYS GIVEN ME PROBLEMS, JUST USE JFD. HERE IS THE LINK: http://sourceforge.net/projects/stockodinjfd/files/T959UVJFD.tar/download HERE IS THE PIT FILE: http://sourceforge.net/projects/stockodinjfd/files/s1_odin_20100512.pit/download
Thanks Ali, second method is the only one that worked, however, after flashing (according to odin, it was successful)
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> cache.rfs
<ID:0/005> modem.bin
<ID:0/005> factoryfs.rfs
<ID:0/005> dbdata.rfs
<ID:0/005> param.lfs
<ID:0/005> zImage
<ID:0/005> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/005> Removed!!
<ID:0/004> Added!!
<ID:0/004> Removed!!
it reboots and shows the Vibrant text logo and is stuck there for 10 minutes.
Is this normal?
flashed JI6 and now it's working, i think there might be something faulty with the JFD you posted, that or the fact that sourceforge kills my download every 20 second, i had to use a download manager.
anyway, thanks
I have raw Galaxy SII I9100GSMH phone. I want to flash it completely using Odin Downloader v1.85. I am planning to put I9100XXLPJ_I9100XXLPJ firmware into it. But I need to flash it completely. This hardware was used for something else now I want to revert back to Android,
As per my understanding I need to flash
1. Bootloader
2. Firmware
3. OXA
Any other thing please mention. Please let us know from where I should get all complete firmware to revert my phone back to Android. Above firmware version is 4.0.3 If I am not wrong.
I searched forum and it mostly states firmware update from one version to another. But here need is to complete flashing.
Andro-Hack
Edit:
Following message comes in Odin Downloader v1.85
<ID:0/012> Added!!
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/012> Removed!!
<ID:0/012> Added!!
Steps:
1. Get the phone into download mode: Volume Down+Power+Center Key
2. Connect Odin downloader. It recognizes phone is COM port 12.
3. Select the pit file as it needs re-partition
4. Select the BootLoader
5. Select PDA, Phone and CSC
6. Press Start.
As I informed before this phone has some other firmware, I need to change it to Android.
Info:
Samsung Galaxy S 3 GT-I9300 (Europe, Denmark)
everything is stock
I used mskip's unified toolkit for my phone's model and tried to root. I tried searching for this problem but haven't come across one yet.
1. I installed necessary drivers for toolkit to work.
2. Chose Root/Unroot Options > ALLINONE (insecure boot, recovery, root, busybox, restore files)
3. Odin opens and I follow instructions to load the corresponding tar file.
4. I press Start. Odin's message field says:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
5. Odin is stuck here and the phone's screen says "Downloading..." I have left it for 1.5 hours and it hasn't rebooted. I think the file also has not been pushed onto the device.
6. I exit out of Odin, then hold the phone's power button to turn off.
7. I reboot and the phone loads fine. Here, the toolkit tries to push superuser but it gets "device not found" error messages. The toolkit then goes back to the main menu.
8. I retry steps 2-4 but only for an insecure boot image. Again, I get the same results. I also used Root Checker to see if it was rooted. It is not.
Is there something I'm missing? Kies is not running on my PC. Should I use another program to root/install a recovery?
Thanks for reading.
Make sure Kies isnt running in the background.
Try turning off any anti-virus / firewall you have.
mikep99 said:
Make sure Kies isnt running in the background.
Try turning off any anti-virus / firewall you have.
Click to expand...
Click to collapse
I turned off my anti-virus and firewall, and it didn't help. Afterwards, I also tried another USB port, to rule out any COM issues. Again, nothing. I doubt it has anything to do with the USB cable itself since I'm able to transfer files between the PC and the phone's internal storage.
Kies? I'd uninstall it if you have it and dont need it.
USB debugging on?
EDIT - Run ODIN as admin?
mikep99 said:
Kies? I'd uninstall it if you have it and dont need it.
USB debugging on?
EDIT - Run ODIN as admin?
Click to expand...
Click to collapse
I do not have Kies installed. USB debugging is on. This is verified by the toolkit, as it does not let me proceed without USB debugging on.
I am pretty sure ODIN is being run as admin. However, the toolkit opens ODIN for me from a batch file. I am trying one more time, this time using another USB cable.
More info:
Samsung Galaxy S3 toolkit v7.0
which contains Odin v3.07
EDIT:
I changed the USB cable from an older one to the one that came with the phone. This apparently made all the difference. Thank you, mikep99 for all your help.
No problem - glad you got it sorted
Hm. Mine gets stuck at Getting PIT for mapping (Brand new phone, old one broke).
Just trying out a different COM port as well :/ Hope it works some time soon. I HATE the cr*p the German Telekom puts on their devices -_-
Lg
I have a similar problem to yours, slight worse.
My phone was going really slow at one point and decided to un root it, with no success. I only factory reset it and still had the root.
I tried to flash it with the stock thingy and got this message in Odin:
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
I left it like this for an hour maybe, and I got inpatient and pulled the plug (I may think I should shoot myself for the stupidity)
And I got the error: "Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again."
At that point I tried to root it with the original root I used at first (CF-Root-SGs3-v6.3) and that worked slightly, but now I have the problem where the galaxy s3 logo "freezes" with an red exclamation mark in the top left corner, I am stuck as ****, ****ed up bigtime, halp.
Hi guys, i 've got a problem, maybe serious. My S2 freezed. I have a custom jelly bean rom. I took off the battery, tried to turn on, but it stucked on bootloop. Now it only goes on download mode. I used Odin, trying to upload a stock Rom. But each time it failed, stucked as showed:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
It happens with each version of Odin.
It stucks even when i try to upload the .PIT file or a Kernel one, changing all the USB port I have.
I even tried with ADB, but Adb does'nt recognize galaxy s2. I know ADB requires usb debugging enabled to detect your device, but in jellybean, Developer options are DISABLED by default, therefore, usb debugging is disabled too.
Is there anyone who can help me?
Thanks a lot
You cant enter recovery mode? If you have download mode try to reinstall drivers for Phone and try another cable or another pc.
Odin recognized your phone?
mosespl said:
You cant enter recovery mode? If you have download mode try to reinstall drivers for Phone and try another cable or another pc.
Odin recognized your phone?
Click to expand...
Click to collapse
Yes, Odin recognizes my phone, but stucks as i said before. I' ve tried all port usb I have got, and cables too. But, nothing. Maybe another pc...
Hello sry for my bad english !!
I this morning i found my phone dead .. after i tryed to turn it on the phone stuck at "Samsung i9300 Logo" ..
I downloaded a stock firmware and after i tryed to flash it with Odin it give me this error
"<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1) "
i allready tryed the following procedures :
- Flash stock 4.3 firmware (Normal just with PDA / And another with -Bootloader PDA PHONE MODEM CSC)
- Flash firmware with PIT file and re-partition ticked - > Stuck on " Get PIT for mapping "
- Flash just PIT file - > Stuck on " Get PIT for mapping "
- Flash Recovery simple and with PIT file - > Stuck on " Get PIT for mapping "
i can't flash anythig with ODIN .. now if i try to boot up my phone i give a white image with stripe like old crt TV .. but still enter in download mode !
what i can do .. ?
Sounds like emmc failure, probably time for a new phone.
Try the dead boot recovery thread in general forum.
i can buy a new motherboard .. i don't want a new phone now .. i wait for S6 !
denny_the_one said:
Hello sry for my bad english !!
I this morning i found my phone dead .. after i tryed to turn it on the phone stuck at "Samsung i9300 Logo" ..
I downloaded a stock firmware and after i tryed to flash it with Odin it give me this error
"<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1) "
i allready tryed the following procedures :
- Flash stock 4.3 firmware (Normal just with PDA / And another with -Bootloader PDA PHONE MODEM CSC)
- Flash firmware with PIT file and re-partition ticked - > Stuck on " Get PIT for mapping "
- Flash just PIT file - > Stuck on " Get PIT for mapping "
- Flash Recovery simple and with PIT file - > Stuck on " Get PIT for mapping "
i can't flash anythig with ODIN .. now if i try to boot up my phone i give a white image with stripe like old crt TV .. but still enter in download mode !
what i can do .. ?
Click to expand...
Click to collapse
read this post & try it:
http://forum.xda-developers.com/galaxy-s3/help/help-past-samsung-boot-logo-t3022289
Hello, sorry to revive such an old post.
Today my S3 died EXACTLY like OP described. Did OP or anybody here found a solution to this problem? The phone can still boot up in download mode, so not everything is lost. However, it seems like it got so corrupted that even the Samsung logo became white with stripes, just like the OP said. I tried flashing a new recovery so I can reinstall the OS safely, but it fails in Odin and says "There is no PIT partition".
Yesterday it was OK, it happened overnight. I didn't still anything at all recently because the phone is so old and slow I only istall the apps that I need to communicate.
Any help would be appreciated!
Are you flashing with the original Samsung USB on a USB 2.0 port?