Related
Hi I have a T-Mobile Vibrant and everything was working excellent till today... I took some pictures on the beach and when my girlfriend asked me for the pictures, I plugged the phone to the PC but it didn't recognized the phone. I had installed the samsung vibrant drivers but it is not working! I cant even use the AIO Vibrant Toolbox to put it in download mode for flashing to stock! Im desperate! Please Help! Hope is not a dead usb port!
Things I tried:
Factory Reset
Change the USB Port
Format Internal Memory
Try these drivers;
http://drivers.softpedia.com/dyn-postdownload.php?p=96692&t=4&i=1
EDIT:
Make sure you remove previous drivers, and reboot your comp.
not workin
Hi I tried using those drivers but they didn't work... I formatted my pc tio see if it was a problem with pc but everything is the same... Vibrant knows it is connected it sounds when connected... Pc just says unrecognized device... Dont know what to do... What else can I do...?
try to go to computer->control pannel->remove new device (vibrant) , reainstall drivers (without phone connected) , connect your phone let windows find Your phone )
if that didnt help 1.before windows boots press F8 which will boot you in tree which will give you few options , 2 click on option which says DISABLE SIGNATURE VERIFICATION 3. REINSTALL DRIVERS 4. CONNECT YOUR PHONE .
anther option is go to phone go to 1.SETTINGS 2.APPLICATIONS 3.DEVELOPMENT 4.CHECK USB DEBUGGING
One more 1. Settings 2. Applications 3. Usb 4. Enable mass storage instead of kies or music player .
tried everything
I reinstalled the drivers that way.... change the settings on the phone and i get the same USB Device not Recognized
Devices and Printers Publisher details
Issues found
Unknown Device is not working properlyUnknown Device is not working properly
Windows has detected a problem with Unknown Device. Detected
View device details Completed
Problem with PnP devicesProblem with PnP devices
There are problems with some PnP devices. Windows will take additional steps to further troubleshoot these devices. Detected
Issues found Detection details
5 Unknown Device is not working properly Detected
Windows has detected a problem with Unknown Device.
Device information
Name: Unknown Device
ID: USB\VID_0000&PID_0000\5&3B51E880&0&3
Error code: 43
View device details Completed
View details about Unknown Device and check if there is a solution available.
Problem with PnP devices Detected
There are problems with some PnP devices. Windows will take additional steps to further troubleshoot these devices.
This is what i get on windows troubleshooting.
look!
This is what i got on device manager!
i would sugest redownloading MOTHERBOARD drivers and USB drivers for Your motherboard.
Please
Please someone help me... Im about to cry ...
How do I know is a dead usb port??
by no means dont take my word for it will work im no computer tech :> (yet) P
it cant be dead usb port on your phone since windows detects the phone when u hook it up
I will download ubuntu and my motherboard drivers... and tomorrow will try on a different pc..
awca22 said:
I will download ubuntu and my motherboard drivers... and tomorrow will try on a different pc..
Click to expand...
Click to collapse
Did you ever get this working? I'm having the same issues. I've tried 3 different computers and 2 different operating systems, all that I used last week without any problems. My phone is definitely not in Debug and it's definitely on Mass Storage. What gives?
Hi I couldnt fix it... I did found on internet about corrosion on the usb port but havent tried afraid to ruin it...
awca22 said:
Hi I couldnt fix it... I did found on internet about corrosion on the usb port but havent tried afraid to ruin it...
Click to expand...
Click to collapse
I don't think it's corrosion. I see all the pins fine with no wear on both the cables and the phone.
i bricked mine awhile back...and it wouldnt connect to windows 7 but would on vista.......dont ask me why but both my wifes and mine wont connect to either pc we have....have to remove external card and move things around like that.....sucks.
Rayn1328: that's what I do right now... move stuff to sd card and then to the internal sd card....
PsychoCemia: Well if it isnt corrosion..... What would be wrong with our devices? Everyone thinks its software issues but it is a Hardware issue....
I would like somehow to help us to repair our bricks! PLEASE!
awca22 said:
Rayn1328: that's what I do right now... move stuff to sd card and then to the internal sd card....
PsychoCemia: Well if it isnt corrosion..... What would be wrong with our devices? Everyone thinks its software issues but it is a Hardware issue....
I would like somehow to help us to repair our bricks! PLEASE!
Click to expand...
Click to collapse
I did look around a bit more, and found out about a thing called "USB unbrick." Looks interesting, but I can't do it from work, since I don't have ADB/Kies/etc here. I'll try it out when I get home this evening.
Here's a Link.
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Request again
Dear mates
I have really very high respect for the forum so please help me out.
ThanQ
Cheers
This happened to me twice before. I had to send it to LG's Service Center because I saw no way of fixing it since the computer wouldnt know what to do with it...
If you have custom recovery installed, you might be able to flash an original ROM over it. This wasn't an option for me before and it seemed like the only way to fix my phone. Don't take my word for it though. Try for the service center first if possible...
Did you try going to settings and choosing Mass Storage only?
Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)...
Before going to any service, do a backup and Factory Reset your device, then try again...
Oh, and disable LG modem from Device Manager after installing the USB drivers.
USB not getting detected
I am trying in choosing Mass Storage only.
"Also, change the USB port of the cable with which you connect your phone (plug the cable in another one - try this with all ports if it doesn't work the first time)..."
Not helping either
Disabled LG modem from Device Manager after installing the USB drivers.
No use
Before going to any service, do a backup and Factory Reset your device, then try again...
I will try this definitely but going to service means 3-4 days without phone . really very scary .
thanks mate
anymore help
Okay , I did face this problem before and I did about hundreds of advice from my friends but this is the step that works.
I discovered that this happens when you do crazy **** on your sd card with applications such as titanium backup or root explorer. Curiousity kills the cat.
Firstly you need:
1) Usb Card Reader [Of course which suits with your sdcard]
2) Computer
Firstly, you want to dismount the sdcard from your phone and mount it to the USB Card Reader.
Connect the Usb Card Reader to your Computer.
You should be able to gain entry to the sdcard
Next,clear everything on your sd card then place your sd card on your phone back and do a factory reset. If you don't do a factory reset then you must do it all over again if you decided to connect the usb to the phone. After reset-ing the phone , try to connect your phone to the computer. Congratulations.
Note: This works for me but it doesn't meant that it will work for you , but I think that this is worth the try.
sanagg1 said:
First of all I am a big-Noob.
My LG optimus one P-500 is in stock ROM.
My Problem :-
Earlier USB was working fine but now
when I plug it in to the AC Adapter it charges OK but when I plug it in to the USB after that it only charges and neither the Phone nor the PC recognizes the USB data connection.
I have tried
1) Power off the phone and remove the battery for a couple of seconds and power it back up, after doing this the USB does not connects. Not even recognised by PC or Phone
2) Device manager also does not detect anything.
3) Uninstalled modem driver and reinstalled USB driver but no result.
Please help
Thanks in advance
Cheers
Click to expand...
Click to collapse
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Got exactly the same situation with USB(on different PCs) and also Emergency mode on every reboot(taking battery out for about an hour helps).
Did SD wipe though not sure about factory reset afterwards, gotta try it one more time...
mansirawat said:
"Ur phone charges through usb that means your phone usb port/usb cable is ok."
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Brainy142 said:
I would argue that, I have a samsung omnia that outright refuses to do anything besides charge over usb.
Click to expand...
Click to collapse
Is it android ?
Lets wait for op reply.
Sent from my LG-P500 using Tapatalk
mansirawat said:
Ur phone charges through usb that means your phone usb port/usb cable is ok. Do this :
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
Unfortunately, it did not help either.
any ways,thanks for pointer
Cheers
mansirawat said:
Uninstall the drivers, restart the pc and try connecting the phone again. Remember not to install the drivers again. Win7 save a dump of old drivers and i think it will auto detect it. Post results here.
Click to expand...
Click to collapse
I have tried uninstalling driver and just plugging in with USB but still neither PC nor phone detects USB connection.
I have tried it on Win7, Win Vista and WinXP.
respected mates please help me.
I am on transfer in June so don't want to take chance with Service centre as of Now.
Cheers
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Miasmic said:
Are you sure you are having the latest driver?
try this:
Code:
csmg.lgmobile.com:9002/client/app/B2CAppSetup.exe
install it,
(you may have to choose language from the last tab, 1st or 2nd option)
and choose P500 from "driver installation"
I didnt experience this issue but if i cant help im sorry.
Click to expand...
Click to collapse
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
sanagg1 said:
I could not find P500.
the names were associated with carrier like T-mobile, verizone etc.
any suggestion
I know i'm stupid
cheers
Click to expand...
Click to collapse
Try another cable.
Sent from my LG-P500 using XDA App
None of the above methods worked on mine as well - same results on different cable(pc/os).
Will try to flash rooted original firmware via custom recovery, del custome recovery and root and send it to service.
Help me out guys Can't connect my galaxy s ii on a contract with 3 (three) uk to a pc USB Device NOT recognized .. Woke up this morning and it's not working .. I have tried everything I don't know what else i can do... Anyone had or having same problem ?
Change usb port
Uninstall and reinstall kies and the drivers
Try a diff cable
Try a diff computer
Sent from my GT-I9100 using XDA Premium App
I have tried everything even if the problem was with my pc it should work as a mass storage on the diff pcs ... but it's not ...
an4o said:
I have tried everything even if the problem was with my pc it should work as a mass storage on the diff pcs ... but it's not ...
Click to expand...
Click to collapse
if you find a fix, let me know cause I have the same problem. Three different pc's (1 win7, 2 xp)...reinstalled kies...changed roms. Been using wifi explorer...but still annoying
Seems like we are the only one who have this sort of problem ((
is the usb debugging ticked? if it is untick it
Unticked ... Even if don't have drivers i should be able to connect it as a mass storage ...
Guys anyone any ideas ?
Sent from my GT-I9100 using XDA App
Have you tried ticking usb debugging and connecting in mass storage mode?
Do you have Clockworkmod recovery?
If so boot into it,
plug your phone into the computer
go to the mounts menu
hit mount usb storage
The internal storage should mount as mass storage.
I've tried to flash rom with odin but even here pc can't recognize the device
Do you think it worth sending device to 3 (three) uk repairs ?
Have you tried mounting the device from within recovery?
If that also doesn't work you may have a dead usb controller.
Also, you should try using a different cable.
Sent from my GT-I9100 using XDA Premium App
Tried everything and diff cables .. Looks like i'm gonna have to send it ((
an4o said:
Tried everything and diff cables .. Looks like i'm gonna have to send it ((
Click to expand...
Click to collapse
Flash back to a stock rom and reset the flash counter first to make sure.
Sent from my GT-I9100 using XDA Premium App
I just had a similar problem today with a friends SGSII managed to solve the problem for her by going into kies and in options reinstalling the drivers, it took about 15min for the pc to complete but now it works
Maybe it could work for you
Sent from my GT-I9100 using Tapatalk
Flash back you mean with ODIN ? if so device can't be recognized in that programm too .. The only thing i can do is "hard" reset and it didn't help at all ...
Tried it 3 times ((
When i first got the phone and connected to a pc it opened up the internal storage folder ... and so should do on any other pcs but it`s not anymore ..
Hi folks.
Can anyone tell me how I can do this? I have a usb cable but my device suffers from the usb port problems which have been common on this phone. I can charge my phone ok but it won't connect to my pc as an external hard drive, through Kies or Odin.
Can anyone help. My sgs2 is rooted and running checkrom v6
johnbhoyc said:
Hi folks.
Can anyone tell me how I can do this? I have a usb cable but my device suffers from the usb port problems which have been common on this phone. I can charge my phone ok but it won't connect to my pc as an external hard drive, through Kies or Odin.
Can anyone help. My sgs2 is rooted and running checkrom v6
Click to expand...
Click to collapse
Search for "mobile odin" on XDA. It's what you are looking for...
Try mobile Odin (paid app). Put your firmware files on SD card and flash via mobile Odin.
Sent from my GT-I9100 using Tapatalk
Dropbox
1. Put the rom on dropbox
2. Download app dropbox on mobile
3. Turn wifi on
4. Download rom onto sd card in your chosen folder
5. Reboot into recovery
6. Flash the rom
No usb cable needed there are other methods also but this is probably the best way i do it.
Hi, I need advice, today I made the root SGS2 and when you want to load custom ROM so I need to get to the phone memory. But since I can not root galaxy connect to it via usb to pc not know what to do? I tried to reinstall the drivers remove kies etc.. nothing ..
Thank you all for your advice.
What?
Aha ..
Sorry for my bad English.
so, again
Today I made a root on my Samsung galaxy s2.
Since then we can not connect the phone to the computer via usb cable.
Because I want to insert a custom ROM, you need to connect to the PC.
Therefore I would like to ask you whether you know what happened? Why can not I connect to PC via USB cable while before we root via usb cable worked.
I tried reinstalling drivers but still nothing.
xdrolloff said:
Aha ..
Sorry for my bad English.
so, again
Today I made a root on my Samsung galaxy s2.
Since then we can not connect the phone to the computer via usb cable.
Because I want to insert a custom ROM, you need to connect to the PC.
Therefore I would like to ask you whether you know what happened? Why can not I connect to PC via USB cable while before we root via usb cable worked.
I tried reinstalling drivers but still nothing.
Click to expand...
Click to collapse
Don't know about the whole pc-thing, but you can download roms directly to your phone.
And btw, opening two of the same topics is not the way to let people answer your questions faster. Next time just open one thread.
Sent from the Matrix
......and you can flash them in .zip form with cwm,or .tar form with mobile odin.So no need for pc or to talk crap.
Yes I know, but I need to download a backup from mobile to PC
xdrolloff said:
Hi, I need advice, today I made the root SGS2 and when you want to load custom ROM so I need to get to the phone memory. But since I can not root galaxy connect to it via usb to pc not know what to do? I tried to reinstall the drivers remove kies etc.. nothing ..
Thank you all for your advice.
Click to expand...
Click to collapse
Well if you want to go into usb mode...settings> (under wireless) go into more settings>usb utilities>connect to pc
Then connect your phone to the computer and remember to keep usb debugging off..
Or you can simply take your data in a mmc via card reader and put it into your internal from the mmc...
Press thanx if I helped...
Sent from my GT-I9100 using xda app-developers app