hello can you help me? sam on my s2 ics installing 4.0.3 does not work on any side key medium pressure type vibration options for data connection ... ... and the screen freezes? Instead gingerbread installing everything works perfectly? done deep clean either 1 or 2! several times! and especially in the boot after installing the app does not exit the screen typical of different languages and configurations, but turns on as if I reboot and everything was already installed!
What did I just read...
Sent from my GT-I9100 using XDA
seriously.... ...come on dude.....what do u want to say.. ....
me too had the same problems as like urs. side key doesn't lock the screen and holding it longer switches my phone off. but the flight mode, data connection mode, power off , silent mode, all are gone. holding the side button used to show a white box list containing these elements........but now it switches the phone off after holding it longer. Please help anybody to solve this issue
suhag said:
me too had the same problems as like urs. side key doesn't lock the screen and holding it longer switches my phone off. but the flight mode, data connection mode, power off , silent mode, all are gone. holding the side button used to show a white box list containing these elements........but now it switches the phone off after holding it longer. Please help anybody to solve this issue
Click to expand...
Click to collapse
Means you are probably missing your keystr file. The fix has been discussed dozens of times already. Please search for this. FYI, you will need root to implement the fix.
thanks man....u mean to say that i should prefer rooting my galaxy s2 ics 4.0.3....ok then .... but the FYI code for fixing these didnt work without rooting....hope it works after rooting
suhag said:
thanks man....u mean to say that i should prefer rooting my galaxy s2 ics 4.0.3....ok then .... but the FYI code for fixing these didnt work without rooting....hope it works after rooting
Click to expand...
Click to collapse
...
I SAID above that it wouldn't work without root. I wasn't unclear, I didn't think.
hey man it didn't work after rooting too. i m harassed man. i dont know what to do .i typed the code *#*#7594#*#* and it displayed Enable to shutdown on End call long press.....and at a the side a box appears either to tick it or not......if i tick it then long pressing directly shutdowns my phone samsung galaxy s II I9100(international version).....my firmware is I9100XXLPQ_I9100ODDLP7_I9100DDLP8_HOME.tar.md5 single file . i flashed it and rooted the firmware as u said...but the result is same. screen lock and long pressing side button doesnt work. plz explain me the whole process to solve this issue
suhag said:
hey man it didn't work after rooting too. i m harassed man. i dont know what to do .i typed the code *#*#7594#*#* and it displayed Enable to shutdown on End call long press.....and at a the side a box appears either to tick it or not......if i tick it then long pressing directly shutdowns my phone samsung galaxy s II I9100(international version).....my firmware is I9100XXLPQ_I9100ODDLP7_I9100DDLP8_HOME.tar.md5 single file . i flashed it and rooted the firmware as u said...but the result is same. screen lock and long pressing side button doesnt work. plz explain me the whole process to solve this issue
Click to expand...
Click to collapse
You didn't search the right thing. I said your keystr file is missing. You didn't mention a keystr file anywhere there.
Google this: "site:forum.xda-developers.com i9100 ics keystr"
man u are great.thank you so muck man.... thank you
did you find the solution ?? post it pleace! tnx
maxkin23 said:
did you find the solution ?? post it pleace! tnx
Click to expand...
Click to collapse
I see you found the solution. Good job.
Related
Hey everybody
I just expose my problem
1-the Folio 100 i bought is a new brand (received yesterday)
2-I turn on my Folio 100, just in beginning they is no light on the 4 buttons,
i wait android to boot and in the homescreen i try to use the 4 buttons, nothing happens, no light
3- i decide to install the Foliomod without wipe (because the home button like the 3 another button don't have any light, i try to press the buttons many time, still nothing)
4- I install foliomod successfully without wipe everything work better but still the problem of the 4 buttons (no light and don't work)
5- I install different recovery.img but impossible to use it, it's simple, when i press the power button, don't have any light on the 4 buttons, look like the 4 buttons are desactivate on boot mode or anything else
I was wondering if anyone have the same problem ?...
I battle with that, i try to do a reset mode with the button near the battery, get off the battery (power button hold like do a clear CMOS) still nothing
I'm tired to send the Folio back
I really want to fix it, they is no way to fix this problem ?
Thanks !
one thing i find pretty annoying is the fact that to press the buttons you have to make contact with your whole finger.
I dont mean to make presure, I mean to make contact with a large portion of skin than just taping the button.
I got my folio one week ago and I am still getting used to it.
Maybe you already tried to tap the buttons in several ways but... this is the only thing I can think of right now.
By the way... the default behavior es to have the lights off and to turn them on for a second when you tap the buttons.
I hope this helps...
Thanks but if you check what i said, i can't use the buttons.
Usually the home button you can use it on recovery mode but i can't do anything, it's like the 4 buttons don't exist, like desactived.
try to install folio widget and change the button sensitivity
roglio said:
try to install folio widget and change the button sensitivity
Click to expand...
Click to collapse
If the home button don't work on recovery mode, i don't think folio widget can help, foliomod 1.4/1.3 has already a folio widget and changing the value of the sensitivity didn't change anything
I think the problem is more on the boot of the folio, didn't activate the 4 buttons
Sinate said:
I think the problem is more on the boot of the folio, didn't activate the 4 buttons
Click to expand...
Click to collapse
its seen before... open folio and remove battery .. wait 20sec and reinsert and boot .. same can happen to sdcard slot and vol button etc.. very strange hardware we got..
Dexter_nlb said:
its seen before... open folio and remove battery .. wait 20sec and reinsert and boot .. same can happen to sdcard slot and vol button etc.. very strange hardware we got..
Click to expand...
Click to collapse
Like i said, i already do that i don't know what happen with this hardware, i start to regret.
If i can't fix, i will send back
Did you see the folio forum on the website toshiba was deleted ?...
Sinate said:
Did you see the folio forum on the website toshiba was deleted ?...
Click to expand...
Click to collapse
what a bummer.. (just saw it now)
does that say something about them and their next release..
i will NOT be supporting their next tab for sure!
Dexter_nlb said:
what a bummer.. (just saw it now)
does that say something about them and their next release..
i will NOT be supporting their next tab for sure!
Click to expand...
Click to collapse
When we press the power button have a small boot sequence, it's probably this boot sequence make many problem.
I try to erase the boot and change it on fastboot mode but it always fail.
Sinate said:
When we press the power button have a small boot sequence, it's probably this boot sequence make many problem.
I try to erase the boot and change it on fastboot mode but it always fail.
Click to expand...
Click to collapse
bootloader is closed source.. probably needs re-designed, and we havent seen any updates of it, since their update.zip probably cannot write a new one..
i think they forgot to add support for updating it..
just like the full wipe with power button, probably also a mistake..
That what i was thinking
Mistake to Mistake
This reminds me the TG01 (phone by toshiba, really suck)
Hi, I bought a crashed folio just to see inside it's guts and found that those bastard buttons are a board on its own.
I'm going to reverse engineer those signal and replace them with push buttons.
All these OEMs should learn that touch technology is only for the screen and nothing else!
roglio said:
All these OEMs should learn that touch technology is only for the screen and nothing else!
Click to expand...
Click to collapse
i think Google figured this out for us since they invented touch buttons somehow..
Unbelievable!
The chip on the capsense board is a PIC16F722 from MicroChip!!!
PIC16F722 <--- difficult to program and too much problem on it, they use this on clone phone in China.
I sent back my Folio, i don't know if i get a new one or wait for the XOOM or iPad 2 (but don't make any sens without USB/Thunderbolt, SD card etc)
Hi
Another problem... again... android... always some problem with it.
When i press "sym-au" key on phisical keyboard and scroll all the way down it freezes and stays there. It is possible to disable it, but it wont move, or clicking in any symbol has no effect completely unresponsive.
On virtual keyboard the same... blocking and unblocking device helps also restart. But its frustrating to remember about it. Is it any solution ? On stock rom there was no such problem.
floyyt said:
Hi
Another problem... again... android... always some problem with it.
When i press "sym-au" key on phisical keyboard and scroll all the way down it freezes and stays there. It is possible to disable it, but it wont move, or clicking in any symbol has no effect completely unresponsive.
On virtual keyboard the same... blocking and unblocking device helps also restart. But its frustrating to remember about it. Is it any solution ? On stock rom there was no such problem.
Click to expand...
Click to collapse
Scroll the last part slowly (scroll it with your finger, don't fling it), it will stay responsive, if it does freeze, doing a rotation from landscape to portrait will make it respond again.
SmG67 said:
Scroll the last part slowly (scroll it with your finger, don't fling it), it will stay responsive, if it does freeze, doing a rotation from landscape to portrait will make it respond again.
Click to expand...
Click to collapse
Thanks for tip. It helps.
So its known problem... this version of rom will be updated? Is there any way chance this will be fixed ?
floyyt said:
Thanks for tip. It helps.
So its known problem... this version of rom will be updated? Is there any way chance this will be fixed ?
Click to expand...
Click to collapse
NO, that ROM won't get any updates anymore, and the issue is present on just about all roms, apart from the original stock firmware. If it was easy to fix someone would have done that already, i guess, so i won't hold my breath.
Just think of it whenever you need something that's near the bottom, it's not that hard to live with.
SmG67 said:
Just think of it whenever you need something that's near the bottom, it's not that hard to live with.
Click to expand...
Click to collapse
I just wanted to have software completely bugs free if it was possible, your right its not hard to live with . Stock rom gave me more problems. thx bye.
Hi!
I'm using a recent CM9 nightly with default kernel.
I would like to have your opinion : about 3/4 a week my SGS3 is "stuck" when it's locked : impossible to wake up using home or power button, the screen stays black.
The weird thing is that when it happens, the phone is not frozen : I can still hear music on the headphones and control volume using Up/Down buttons.
Sometimes I let it stuck and receive a notification some minutes later and the phone magically can be unlocked again, screen wakes when I push Home button.
Very weird and annoying when that happens.
My question is : what do you think it could be? An app? How can I debug this and know what prevents the screen to wake up when that happens?
Thanks.
Wipe and reflash the rom
zodiaxe66 said:
Wipe and reflash the rom
Click to expand...
Click to collapse
Thanks, but is that the kind of easy answer you all tell when you don't know the exact answer?
When I installed CM9 a week ago, I did do a full wipe...
I think that next time it happens, I will try to connect my SGS3 on USB and do a adb logcat, maybe I'll find useful information.
Have you tinkered with any of the could settings or voltage settings?
Sent from my GT-I9300 using xda premium
ricey1986 said:
Have you tinkered with any of the could settings or voltage settings?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nope
slainer68 said:
Nope
Click to expand...
Click to collapse
Having a similar problem to yourself. Installed CM9 rom had a play and then went back to omegaV9 performing a full wipe using the instructions on this site before reflashing.
Since then when my phone is locked screen off then i unlock either via swipe or using security code (digits ) it looks like the phone unlocks but sort of does a warm boot with black screen for a few seconds with the two buttons down the bottom light up.
When it starts it looks like all the apps have stopped and are restarting again.
I re flashed again omega 9 thought i had it sorted but it started playing up again this evening.
If anyone has any ideas please post..
Hi, I'm a newbie here. I also exprience this problem with my samsung GT-i9300. I hoping to see a fix with this problem.
This forum has been so helpful to new android users. Thank you guys.
Hi guys,
i been having this very annoying problem with my GS3 LTE (9305) but when i compare to other GSIII's it seems only mine behave like this but i cant find any reason or any option for the cause.
Basically the problem is that when i call someone and the phone screen goes to off sometime i want to wake up the screen and press the button below the screen and what my phone does is to minimize the call application but on my friends phone the call application stays and only the screen is turned on.
Can you guys please help me finding the root cause to why my call application minimizes itself when the screen is off?
I been searching for every option there is and cant find anything useful, also i have never installed any other dialer application or anything like that.
Please help me this is getting me nuts.
vampyren said:
Hi guys,
i been having this very annoying problem with my GS3 LTE (9305) but when i compare to other GSIII's it seems only mine behave like this but i cant find any reason or any option for the cause.
Basically the problem is that when i call someone and the phone screen goes to off sometime i want to wake up the screen and press the button below the screen and what my phone does is to minimize the call application but on my friends phone the call application stays and only the screen is turned on.
Can you guys please help me finding the root cause to why my call application minimizes itself when the screen is off?
I been searching for every option there is and cant find anything useful, also i have never installed any other dialer application or anything like that.
Please help me this is getting me nuts.
Click to expand...
Click to collapse
its a bug in samsung jelly bean roms - chances are your friend is running ice cream sandwich.
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
its a bug in samsung jelly bean roms - chances are your friend is running ice cream sandwich.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
I tested on a GSII LTE + GSIII + Note2 and all are running JB and works fine on their phone.
If it is a bug i hope Samsung fixes it soon, its been a while i got an update and this thing is so annoying.
vampyren said:
I tested on a GSII LTE + GSIII + Note2 and all are running JB and works fine on their phone.
If it is a bug i hope Samsung fixes it soon, its been a while i got an update and this thing is so annoying.
Click to expand...
Click to collapse
I meant Galaxy S3 Jelly Bean roms... Jkays framework fixes this issue.
If i recall correctly it has something to do with a setting in s-voice I think. Also it happens with any application when the screen turns off.
Sent from my GT-I9300 using Tapatalk 2
beaver2233 said:
I meant Galaxy S3 Jelly Bean roms... Jkays framework fixes this issue.
If i recall correctly it has something to do with a setting in s-voice I think. Also it happens with any application when the screen turns off.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Yes, this issue isn't unique to the dialler. If you let the screen timeout with any application then press the home key, it returns to the home screen.
The workaround is to make sure than in the S-Voice settings, you have "Open via the home key" option set. After this, a single home key press will wake the device without returning to the home screen.
Ask this question in the appropriate section
arghness said:
Yes, this issue isn't unique to the dialler. If you let the screen timeout with any application then press the home key, it returns to the home screen.
The workaround is to make sure than in the S-Voice settings, you have "Open via the home key" option set. After this, a single home key press will wake the device without returning to the home screen.
Click to expand...
Click to collapse
Sadly that didnt work either. I had actually S Voice disabled but enabled and did what you said but it still minimizes the call application
EDIT: very strange , tested calling 4-5 times and suddenly after my friend called me it started working. I called my other cell before and it works fine now. THANK ALLOT MAN.
EDIT2: funny i tried to disable S-Vice again and to my surprise it stil works.
hey everyone
i am a noob. i know how to flash roms,kernels,code in the emulators and all but im not that much into the stuff coz i dont know that much
i am in desperate need of help here
my xperia mini pro has been facing a problem since sometime now
its display does not bbot up. the backlight works fine and so does everything else like the vibration and the led. everytime i start the phone there is the familiar vibration of startup my backlit keys also start. after that the screen is turned on but there is no text on it. the sony boot animation does not appear and neither does anything else. i have searched xda but i didnt find any thread like this. yes, there were a few which resembled it but none like this
it started a few months back when the screen would be working fine and sometimes when i would try and wake it up it wouldnt. i would just press the lock button a few more times and it would unlock after that the screen would come on. this started becoming more frequent and later on i had to reboot it . now my phone boots up but the screen is black. the backlight of the screen does turn on but nothing else appears. no boot animation, no text, no lockscreen nothing at all.
i havent thrown this phone on the ground and it hasnt fallen in water. i dont know what to do. please help !!!
Try taking it to repairs. Might be display problem. I myself am facing exact same problem. I'll open it today and will try to fix it. I'll let you know how that goes
Cheers,
AJ
Sent from my Micromax A110 using Tapatalk
Abhinav2 said:
Try taking it to repairs. Might be display problem. I myself am facing exact same problem. I'll open it today and will try to fix it. I'll let you know how that goes
Cheers,
AJ
Sent from my Micromax A110 using Tapatalk
Click to expand...
Click to collapse
are you gonna like open the phone display and all ?
i'm trying to do a stock flashing as of now
will reply in around an hour if possible
I think you might have bricked u r phone...
Can u tell me can u see SONY logo or phone just vibrates and nothing more ...
My Device
Xperia Mini Pro (SK17i)
TARUN SIDHARTH said:
hey everyone
i am a noob. i know how to flash roms,kernels,code in the emulators and all but im not that much into the stuff coz i dont know that much
i am in desperate need of help here
my xperia mini pro has been facing a problem since sometime now
its display does not bbot up. the backlight works fine and so does everything else like the vibration and the led. everytime i start the phone there is the familiar vibration of startup my backlit keys also start. after that the screen is turned on but there is no text on it. the sony boot animation does not appear and neither does anything else. i have searched xda but i didnt find any thread like this. yes, there were a few which resembled it but none like this
it started a few months back when the screen would be working fine and sometimes when i would try and wake it up it wouldnt. i would just press the lock button a few more times and it would unlock after that the screen would come on. this started becoming more frequent and later on i had to reboot it . now my phone boots up but the screen is black. the backlight of the screen does turn on but nothing else appears. no boot animation, no text, no lockscreen nothing at all.
i havent thrown this phone on the ground and it hasnt fallen in water. i dont know what to do. please help !!!
Click to expand...
Click to collapse
umm...it just vibrates
nothing else...it does boot up however
when i use flastool it shows the OS installed and the recovery and all that
i dont think my phone is bricked coz i didnt install any custom OS or anything i just had it rooted and had deleted some of the stock apps such as facebook and all that bloatware sony puts in its phones.
i think , i am sure now that its a problem with the screen+digitizer
just waiting for a reply from Abhinav2
TARUN SIDHARTH said:
umm...it just vibrates
nothing else...it does boot up however
when i use flastool it shows the OS installed and the recovery and all that
i dont think my phone is bricked coz i didnt install any custom OS or anything i just had it rooted and had deleted some of the stock apps such as facebook and all that bloatware sony puts in its phones.
i think , i am sure now that its a problem with the screen+digitizer
just waiting for a reply from Abhinav2
Click to expand...
Click to collapse
I opened it and tried to fix it but no luck yet. I'll give it another shot and if not possible I'll send it to repair
Cheers,
AJ
Abhinav2 said:
I opened it and tried to fix it but no luck yet. I'll give it another shot and if not possible I'll send it to repair
Cheers,
AJ
Click to expand...
Click to collapse
Hmmm... OK keep us posted Abhinav2. Will wait for your reply.
(copying your style, no offense bro)
Cheers
Tarun
Use Sony pc companion and select repair device.
Sent from my Xperia Mini using XDA Premium 4 mobile app
Hi there, I'm new on the forum, so hello to all...
I have the same problem. My mini pro's touch screen start not responding about 1 month ago, and finally, since 2 weeks ago it not respond at all.
I red that can be a sw problem and you have to change the rom to solve it.
I tried this http://forum.xda-developers.com/showthread.php?t=2366426 .
And also install rom for xperia Active and so on..
With cynogen 9 &10 it start up but the touchscreen doesn't work, with other roms (like the AROMA) they fish the installation, but the screen is always balck. But the tlephone is on, because if you press buttons it react.
(for install cyno I followed this tutorial http://wiki.cyanogenmod.org/w/Install_CM_for_mango)
Please, help me! :crying:
hello, i have a problem with back botton. is it pysical issue ?
nico_cata94 said:
Hi there, I'm new on the forum, so hello to all...
I have the same problem. My mini pro's touch screen start not responding about 1 month ago, and finally, since 2 weeks ago it not respond at all.
I red that can be a sw problem and you have to change the rom to solve it.
I tried this http://forum.xda-developers.com/showthread.php?t=2366426 .
And also install rom for xperia Active and so on..
With cynogen 9 &10 it start up but the touchscreen doesn't work, with other roms (like the AROMA) they fish the installation, but the screen is always balck. But the tlephone is on, because if you press buttons it react.
(for install cyno I followed this tutorial http://wiki.cyanogenmod.org/w/Install_CM_for_mango)
Please, help me! :crying:
Click to expand...
Click to collapse
flash stock ics.ftf & if u then get any problem its HW related.
thewhitewolf89 said:
hello, i have a problem with back botton. is it pysical issue ?
Click to expand...
Click to collapse
lol we cant help u when u give NO info.... (rom, phone, mods appliied etc)