Has any one tried this on the att note and is it worth the $25?
SPIGEN SGP Samsung GT-N7000 Galaxy Note Gel TPU Case Ultra Capsule Unlocked (International) Version ONLY [Infinity White] (FREE Best Steinheil Screen Protector Cover Film Included)
Yes, it's a beautiful case. Especially in white
If you don't feel like spending the $25, or care about the (awesome) Steinhall screen protector, you can drop $8 on a Mercury TPU. Similar fit and finish, without the SGP logo and price tag.
Only real difference is that as Mercury cases are manufactured in Korea, they have holes for a One-Seg TV antenna in one of the top corners
Neat way to save a few bob, though!
I picked up the bright green one a few weeks ago. The fit is the tightest I've seen in a TPU case and the material feels quite a bit thicker than lower priced TPUs I've used on past phones without adding noticeable bulk. All the cut-outs are perfect (even the top mic) and the plug cuts accommodate larger than stock USB cables and headphones.
The included screen protector is pretty nice, on par with my past experiences with Steinheil.
I don't know that it's worth $25 when most TPUs are 1/2 that price but I'm not at all unhappy with it. My only complaint is a small cutout around the top right corner that serves no purpose on the AT&T Note.
Related
Purchased this on 10/02 from androidstation on ebay for $2.95 with free shipping. It comes from Hong Kong and received it in the mail today. It fits like a glove and has all the correct cutouts, including the secondary mic, and no Korean corner cutouts for the antenna. It was made specifically for the ATT i777. It also has the lip so you can put it face down without the glass on anything and the camera is protected as well. The buttons are not hard to push and there is enough clearance in the cutouts so any adapters and headphones can fit. The cutout for the extra mic is it's own hole and not just an extra large cutout. Sorry for the crappy pix. Best $2.95 spent for the phone so far.
what is the "feel" of this case? It looks like it has some hard plastic mixed in.
The hard plastic is actually more of a smooth rubber texture. The sides have more of a harder plastic feel even though they are a rubbery texture as well. The sides have tiny dimples along the side which enhances the grip and also makes finding the volume and power buttons easy since those are smooth. SO in the dark, just feel for the smooth spots on the side and you have your buttons.
Got the same exact one....
Not bad for $3
Sent from my SAMSUNG-SGH-I777 using xda premium
Was thinking of getting this case but didn't want to wait two weeks or so for it, so I went ahead and ordered another TPU case in the US. Blue Argyle. Should arrive here by next week and see how I like the TPU cases and whether I would want the similar designed case of yours, but in blue.
The Ballistic SG Gel case is a very tuff case. I definitely hold it with confidence in my hand. It does add to the size of the phone. All the cut outs for the mics, camera and pen and micro usb plug are just right. Easily accessible no trying to cram your finger in to pull out the pen or having to use a Drumal to adjust the holes. I really like the large cut out for the camera, (some cases with small cut outs can make nasty flash effects and cause pour pics.) I also included a pic of my old Ballistic HC case for my Iphone 4 in there to compare size. I also had a tank case from case mate but it is exactly the same as the Ballistic so I did not bother pulling the iphone out to take pics. I am interested in a screen protector but not sure if the one I like will work. I like the Moishi one and plan to go to the ATT store to see if it will fit under it. I know some of the thinner screen guards should with no issue. I will update later about that. The bumpers on the corners give it the most bulk but are minimal. You can easily lay it face down with no issues. Great shock absorption. I also order a Seidio Active case with kick stand that will be in Monday and plan to do a review of it. One of these will be my permanent case. Let me know if you have any questions. Also I am not a skinny jeans or pants kind of guy but this is extremly pocketable. I have no issues putting it in or taking it out.
Any chance you purchased the White Impact Triple Combo or the BoxWave Resolute? If so, how did these compare the Ballistic Galaxy Note Case?
BeAuMaN said:
Any chance you purchased the White Impact Triple Combo or the BoxWave Resolute? If so, how did these compare the Ballistic Galaxy Note Case?
Click to expand...
Click to collapse
I have not bought those. They look identical though exexpt for the cut out for the camera and the little B printed on each mumper corner. I wonder if they are made as well myself. I have tried the Zenus Capsule and sent it back the day I got it. Terible case with no protection. I thought it was going to scratch my phone just putting it on. It would not let me reply to you earlier today until I had at least 8 post. I will be receiving the Seidio active with Kickstand Monday and one of these two cases will be kept while the other is returned.
Almost forgot. Enter Spring12 at checkout and you can get 20 % off of this case. I ordered it Tuesday the day of release and received to day so pretty fast shipping for there cheapest fair which was USPS. Also if someone wants the Seidio you can get 10 % off at their site with TW10.
Moshi Ivisor AG for Galaxy note
Went to the AT&T store today and tried on the Moshi screen protector that is reaplyable and has no bubbles what so ever and confirmed it does fit under the Ballistic SG Gell case here. Unfortunatley I picked up a white one by mistake so will post picks of the black one when I swap it out later today. I hope and it should I believe work with the Seidio Active with kickstand coming Monday. The screen guard is great it has an anti glare coating and does not atract smudges from fingers like the screen does. I love it most because you can put it on and take it off as many times as you want.
BeAuMaN said:
Any chance you purchased the White Impact Triple Combo or the BoxWave Resolute? If so, how did these compare the Ballistic Galaxy Note Case?
Click to expand...
Click to collapse
The IMPACT TRIPLE and Boxwave are one and the same. I have the boxwave and the ballistic. The ballistic is seems tighter the way it hugs the phone but I prefer the boxwave because there is more protection around the camera lens than the ballistic.
savagepagan said:
The IMPACT TRIPLE and Boxwave are one and the same. I have the boxwave and the ballistic. The ballistic is seems tighter the way it hugs the phone but I prefer the boxwave because there is more protection around the camera lens than the ballistic.
Click to expand...
Click to collapse
I did notice the box wave looked to be more closed in around the lens and flash. Most companies have chosen to widen those holes to allow more light into the lens and to not mess with the flash. I could notice a big difference on my old Iphone 4 photos that had really tight coverage around the lens and flash with the case compared to the latest one I got for it from the same case maker that enlarged the holes because of those issues. I have to say after receiving the Seidio active with kickstand today, I will be sending it back because of how much more protection the ballistic offers. I love the idea of a kickstand, just doesn’t offer enough protection to me. Those extra bumpers on the corners of the Ballistic and Boxwave make a big difference when dropped.
What are you guys/gals using to protect your P769?
I am looking for a Gel/TPU and/or an ultra thin snap on back, like casemate barely there or incipio feather type..
I am surprised there aren't any of the popular Korean brands..
well im using the 100% leather handmade in Korea white coloured flip case that i got free with my lg l9.( the same had cost 6-8$ and of cheap build) and it protects my phone quite well..also our phone is soo slick and backcover soo much eager to be breakable.i think its the best protection till now..
This is what i'm rocking, LG OPTIMUS L9 P769 CASE BLACK HYBRID KICKSTAND ARMOR SKIN COVER
It's a bit bulky, but hey the cells not going to mess up if you drop it. it's two parts, a gel and a hard case (the kickstand) goes over it.
Mine has been naked lately. The gel case I bought on amazon obstructed the edges of the screen making games and stuff hard.
Sent from my LG-P769 using xda premium
Tablechair said:
Mine has been naked lately. The gel case I bought on amazon obstructed the edges of the screen making games and stuff hard.
Sent from my LG-P769 using xda premium
Click to expand...
Click to collapse
I usually like Pleomax or Mercury Pearl Gel/candy/TPU. Lately though most of these have too much lip and cause the edges of wet application screen protectors bubble/curl and lift it..
I ordered this one yesterday; http://www.ebay.com/itm/171015823911
I am seriously looking at this and it's color variations. Love them on the AU/Sony Xperia, japanese quaility/versions.. http://www.ebay.com/itm/251207382725
didnt any of u guys got the free cover...its like a hard case that fits from the back cover side( makes the phone feel like a rock) and a really high quality leather casing glued tp it from the back..which covers the 4.7 inch screen qiute well..if u want i may add photos..
I am using the kickstand as well! definitely bulky, but love the kickstand!!
Bumper Case
Anyone know if/where to get a bumper case for the LG Optimus L9 (P769)?
Thanks,
Clay
clockcycle said:
I usually like Pleomax or Mercury Pearl Gel/candy/TPU. Lately though most of these have too much lip and cause the edges of wet application screen protectors bubble/curl and lift it..
I ordered this one yesterday; http://www.ebay.com/itm/171015823911
Click to expand...
Click to collapse
So I installed this one today, fits well tight, cut outs perfect.Solid feel, adds lip to screen, but isn't "really" curling my screen protector. I can compare it's stiffness and feel to a diztronic tpu.
It's slim, but still not as slim as I would like. I prefer the lip were less or it had none. It's good for people that place the phone face down I suppose. I just like the gel/candy/tpu or hard snapon back just for scratches mainly..
I will be ordering some of the other candy/gel/tpu and chiming in as I get them.
I have been using a Hybrid case since i purchased my phone (P769)
This case is different and better looking than the one mentioned earlier. (IMO)
I own both a white one and black one. It has a kickstand as well. I have dropped my phone about 3 or 4 times and my phone has not received any damage what so ever! (Twice on concrete/pavement after stepping out my car, once in the bathroom tile floor and once on wood flooring)
Black one
http://www.ebay.com/itm/300882491887?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
White one
http://www.ebay.com/itm/181080485491?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Bought the white one first, but started turning yellowish after about 2 months of use. (Might not happen if you are a very clean person, but just like white T-Shirts it will turn ugly white/yellowish regardless. Purchased the black one and it's my daily driver. Highly recommend the black one and it's about half the price of the white one.
Pros: Silicon inner case is great for absorbing the shock if dropped. Outer hard plastic case makes it easy to put in and pull out off your pockets. Volume/Power buttons are silicon covered and give it a fantastic feel when pressed. The silicon cut-out around the 3.5 mm headphone jack is nice and wide which allows my car stereo cable to fit without obstructing the connection. (Common problem that i had with other phone cases on other phones i have owned)
Cons: Not much of a con, but only issue i had was with the silicon being a bit tight around the charger port (Solution: Started using OEM Samsung Galaxy S2/S3 micro usb cable that is way thinner than the original micro usb cable. Fits perfect! (I blame the bulky LG micro usb cable though)
Hit thanks if this helped in making your decision on what case to get.
The Body Glove case http://www.wirelessground.com/lg-optimus-l9-body-glove-elite-stand-case-black.html is by far the best case imo. It gives great protection and give u a unrestricted view of the screen plus it has a built in kickstand that works great in portrait and landscape mode. The majority of the retailers including T-Mobile have it for $30 but wirelessground.com has it for $17.95 plus you can use the "youtube" coupon code for an extra 10% off.
Tech 21 D3O T-Mobile LG Optimus L9 Flex Protective Cover with Impactology Case D30 Ultimate impact Protection - BLACK
http://www.amazon.com/Tech-21-Protective-Impactology-Protection/dp/B00B2OUL52
D3O Technology in action!
http://www.youtube.com/watch?v=j4uMTZWh0Rc
Love it.
I ordered this Nillkin case in matte black April 23rd for 12,08€ including shipping. It came today, so delivery was relatively fast considering it was sent from Singapur.
Packaging:
The case came in stable packaging, so it's unlikely to be damaged during shipping. A simple screen protector with a micro fibre cloth is included. Because of the
rounded edges of the N7P it is way too small though, and leaves 3-6 mm of screen unprotected around the edges.
Feel and fit:
It fits the N7P perfectly and the cutouts for microphone, buttons, ports and camera are very precise. Overall it doesn't add too much thickness to the phone
and feels slimmer than the standard case that comes with the N7P. The lower half of the sides and the back of the case are structured and provide good grip.
The cutout around the camera module is slightly taller than the module itself so the camera is protected. While top and bottom of the phone are unprotected,
the edges and sides are completely covered by the case. The sides of the case are the same height as the display. This makes using the phone while in the case
feel more natural but does not offer any additional protection for the screen.
There are some tiny imperfections, like a bump not being perfectly molded as visible on the pictures attached. For the price the build quality is still very solid
though.
Design:
The case is made from a slightly flexible plastic, and the surface is rubberized and matte. The top and bottom of the phone are unprotected, but this way the
copper accents are still visible. The overall color matches the N7P's original finish. Together with the still visible color accents this makes it a pretty subtle case.
The logo in the lower right corner is on the larger side. I would have favoured a smaller, less striking logo.
Conclusion:
For me this is a haptic and visual upgrade from the standard case included by Nokia. I'd recommend it to anyone who doesn't want super rigid protection
and still wants to show off the N7P's design.
Not durable
In my experience with this case (same material for my older phone), it's not actually durable and will start to break in tiny pieces after a few months.
So, if you want to buy a cover for the long run don't buy it, but if you're going to switch cases in the first place then go for it. The fit and feel is really good.
The bundled acreen protector is not an exact fit but it'll have to do for now
prat28yush said:
In my experience with this case (same material for my older phone), it's not actually durable and will start to break in tiny pieces after a few months.
So, if you want to buy a cover for the long run don't buy it, but if you're going to switch cases in the first place then go for it. The fit and feel is really good.
Click to expand...
Click to collapse
I have had a Nilkin case, exactly the same on my LG G2, my Oppo R9s Plus and my Galaxy Note 4 and they all withstood the test of time?
Ok guys I got the Xperia 1 iii after much thought and since I got it after getting the official Sony case and a screen protector I have been through 3 glass screen protectors in like the first couple of weeks and hadn't even droped my phone outside . I put this down to the poor protection from the official Sony case offers. So I purchased the Spigen case that offers the full bumper cover and replaced another Spigen glass screen protector for little under £15 and after putting it on my bed side cabinet last night and getting in the car this morning I noticed the screen protector is broken again .and I haven't even dropped it inside . So I'm down over £100 in the last month or so and geting fed up with trying to find a decent case and screen protector for the Xperia 1 iii
I also look for a good screen protector. Which one can I get on Amazon Italy?
I have read that it is best to avoid the spigen align master.
As a cover I feel great with the Spigen
Spigen case is great. You will not find a suitable screen protector because the edges of the screen are still "curved" thereby not allowing the protector to cover the entire screen edge-to-edge. I gave up on a screen protector for most phones lately due to this fact.
jaseman said:
You will not find a suitable screen protector because the edges of the screen are still "curved" thereby not allowing the protector to cover the entire screen edge-to-edge.
Click to expand...
Click to collapse
I think it depends on what you mean by edge to edge protection. If you mean it covers the entire front, bezels included all the way to phone edges than no there isn't one, though those screen protectors with black borders all around get pretty close. The draw back is that depending on the manufacturer, some of them have black borders covering the edges of the screen more than others, which can be noticeable and annoying.
There are also screen protectors that go slightly beyond the edge of the screen. As in you can see the border between the screen and the bezels right beneath the glass, but that's about it. I consider that screen edge to edge and I have been using that. As you mentioned, since the screen curves ever so slightly at edges, the edge of that screen protector doesn't sit 100% flush on the screen.
Some manufacturers give a kind of transparent filler glue that you can brush in the gap along the edge to fill it up and make it looks seamless instead of a visible air gap. However because it isn't a solid surface, the glass along the edges can crack if you press your screen edge hard enough multiple times, maybe from an intense gaming session. But under normal use, so far it held up.
I don't have recommendations, as I bought them from my local e-commerce site, although they are direct from China, so I'm sure they are there somewhere on Taobao or Aliexpress. I am not sure of which ones are these if I were to search on those platforms, or on your platforms like Amazon.
I use spigen glass and except the first one that broken easily i have no issue.
I bought spigen case but trashed it after a single day..too bulky...i bought a 10 Eur in soft clear silicon off amazon.it (Elyco Cover) Not the best against yellow tint but i smoke then no case will ever be safe from yellow tint.
But this cover is really really thin and don't ruin phone appearance
The spigen cover for iphone 12 pro was good, pretty thin but protective. The one for Xperia 1 III from spigen is really really bad, it protect well but increase the size of the phone in a nasty way
Evil_Sephiroth said:
I use spigen glass and except the first one that broken easily i have no issue.
I bought spigen case but trashed it after a single day..too bulky...i bought a 10 Eur in soft clear silicon off amazon.it (Elyco Cover) Not the best against yellow tint but i smoke then no case will ever be safe from yellow tint.
But this cover is really really thin and don't ruin phone appearance
The spigen cover for iphone 12 pro was good, pretty thin but protective. The one for Xperia 1 III from spigen is really really bad, it protect well but increase the size of the phone in a nasty way
Click to expand...
Click to collapse
Not sure which Spigen case you are talking about but the one I have does not add hardly anything to the feel of the phone. Oh well, to each his own!
jaseman said:
Not sure which Spigen case you are talking about but the one I have does not add hardly anything to the feel of the phone. Oh well, to each his own!
Click to expand...
Click to collapse
The Spigen ultra hybrid (in 2021 It was the only cover for Xperia 1III fine by Spigen)
And compared to the One i use now is sensibly bigger and bulkier, also i found the hard plastic parts in the rear of the cover pretty nasty.
For example on my old Xperia 1 i have the Spigen Crystal liquid cover and if you compare that Spigen cover with the One for X1 III Is pretty clear how the new cover made the phone bulkier.
It's not much, around 1-1.5 mm thicker, but the feeling Is worst, at least for me.
https://us.amazon.com/Spigen-Rugged-Armor-Designed-Xperia/dp/B08V32DGL7/ref=sr_1_2?crid=LVB4LWO43ZWQ&keywords=spigen+rugged+armor+xperia+1+ii&qid=1647539155&sprefix=spigen+rugged+armor+xperia+1+iii%2Cspecialty-aps%2C67&sr=8-2
$12.00 can't be beat!
I really recommend the original cover with stand:
Osłona z podstawką do smartfonu Sony Xperia 1 III | XQZ-CBBCB - Etui - sklep internetowy Sony Centre
XQZCBBCB.ROW : Stylowa osłona z podstawką do smartfonu Xperia 1 III
scentre.pl
It is made of materials that helps heat dissipation and also anti-bacterial.
Maybe it's only a cover and expensive one but I can say it is really a good quality. So I can recommend it.
Spigen cases all the way. Had them since my Nexus 6P.
If you can get up to north Wales tech base they have what they call clear shield it's like that dbrand skin I have it on my Xperia 5 ii only prob is getting there and paying 20 pound of you want I can show pictures of the front and back o also have the like crabon type back cover and also have Duc ducis flip case I alternate between the 2 and go naked sometimes
Here's what I was on about