I wonder if only my ray or all ray's has poor signal reception. Time from time while I'm talking with smb. my call simply hangs up. And as far as I noticed this happens when the signal reception is a bit lower or not very stable. In places where signal is weak (outside the city) my wife's dumb phone Nok1a got better signal with 1-2 bars, while ray no signal at all.
I've was using .42 firmware for a long time, tried 4.0.3 beta, now using MIUI based on 2.3.7 and still have the same problem, what makes me think that's not software related issue.
What about your phones ? Am I only who has this problem ?
Do you both have the same network operator? I can easily say that my ray has better reception than my girlfriends x10 mini pro. Some exterior phone protections weaken the reception as well.
Kyrius said:
Do you both have the same network operator? I can easily say that my ray has better reception than my girlfriends x10 mini pro. Some exterior phone protections weaken the reception as well.
Click to expand...
Click to collapse
Yes - same operator. My Ray has rubber case on it, but I've checked signal strength with it and without it. No real difference.
jurgised1 said:
Yes - same operator. My Ray has rubber case on it, but I've checked signal strength with it and without it. No real difference.
Click to expand...
Click to collapse
Try to install newest version of baseband.
Sent from my ST18i using Tapatalk
All I can say it I never saw a mobile like Ray with such good signals... much much better signals than my HTC Sensation and HTC Desire I had previously... in fact gud signals was one of major reasons I got this Xperia Ray
The Ray has absolutely terrible wifi reception though. It won't even pick up routers when its right next to the phone whereas my Desire Z could from a pretty far distance. Only major let down.
desirez_pete said:
The Ray has absolutely terrible wifi reception though. It won't even pick up routers when its right next to the phone whereas my Desire Z could from a pretty far distance. Only major let down.
Click to expand...
Click to collapse
With ICS wifi reception improved considerably.
Ridho1 said:
Try to install newest version of baseband.
Click to expand...
Click to collapse
Using 8x55A-AAABQOAZM-203028D-64 , guess it's the latest one...
jurgised1 said:
Using 8x55A-AAABQOAZM-203028D-64 , guess it's the latest one...
Click to expand...
Click to collapse
Nope, 66 is the newest baseband! Have a look http://forum.xda-developers.com/showpost.php?p=24650629&postcount=15!
I don't know, whether the signal strength is better now, but the batterylife is much longer!
for me,
sometime the signal is great..greater than other devices...
but some other time, at certain area, it has no signals at all while other devices have it although we are using the same network operator...
but i don't really care about it cuz i think the signals is so much better than my previous device...
My Ray is actually rather poor when going indoor first floor. But once I step outside or going to second floor, it goes 100% instantly.. So..
sent from my white ray using XDA App
I had "dumb phone" Sony Ericsson k850i (which amusingly enough used to be called a "smart phone" lol), an x10 and now Ray and they all get the same signal on AT&T in the same places. Most places I am it's full signal, a handful get less... but has been consistent across devices.
I only used the x10 (not mini or pro) as my main phone for less than 6 months (free upgrade w/ contract for refurbished) and still tinker with it but for my hands I felt it was nifty but big and clunky, so I bought an unlocked Ray (2-3 months ago). I've lived/worked and hung out in the same places, so I figure it's a pretty good comparison.
TLDR: no problems with signal for me.
Yep, my ray is having low signal reception too.. that yellow triangle always appears. I think is a hardware bugs to bad. I want too switch xperia P but still don't believe they already fix the bugs for signal prob. and. xperia p is not on coming for ICS in the few weeks later.
I've notice while using the cell tower polling monitor of the Llama application that my Ray drops the signal. It shows in the log as Cell: -1:-1:-1 (ignored) No signal/Unknown. I live and work in a big city were the signal strength is very strong and were there are 4 to 6 cell towers all around me (at work or at home).
The lost of signal is very short (a second or two) but actually drop a call once.
I have base band 203028D-64 and running Android version 2.3.4.
Since I don't want to update to version 4.0.3 as there is too many people complaining about lagging problems. I will try to update the base band to 203028D-66 and come back here for results with the Llama log.
misterhoney said:
I've notice while using the cell tower polling monitor of the Llama application that my Ray drops the signal. It shows in the log as Cell: -1:-1:-1 (ignored) No signal/Unknown. I live and work in a big city were the signal strength is very strong and were there are 4 to 6 cell towers all around me (at work or at home).
The lost of signal is very short (a second or two) but actually drop a call once.
I have base band 203028D-64 and running Android version 2.3.4.
Since I don't want to update to version 4.0.3 as there is too many people complaining about lagging problems. I will try to update the base band to 203028D-66 and come back here for results with the Llama log.
Click to expand...
Click to collapse
If you can, update to 4.0.4.
How's 4.0.4? Is it better than 2.3.4? I don't want my phone to be slower and have problems with WiFi connectivity.
hansip87 said:
My Ray is actually rather poor when going indoor first floor. But once I step outside or going to second floor, it goes 100% instantly.. So..
Click to expand...
Click to collapse
same here
hansip87 said:
My Ray is actually rather poor when going indoor first floor. But once I step outside or going to second floor, it goes 100% instantly.. So..
sent from my white ray using XDA App
Click to expand...
Click to collapse
You are describing my problem, but we have that problem with all our phones at home.
Skickat från min ST18i via Tapatalk 2
Don' remove Sim Toolkit.apk
I have to reinstall ROM due to signal problem after removing sim toolkit.apk
While searching on how to ugrade the baseband for my ST18a, I came across another thread about this issue on the Sony's Forum.
If you go to Menu - Wireless & network setting - Mobile Network - Network Mode and change to GSM only, it will give you better reception.
I have tested and validated it with the "Network Signal Info" & Llama App.
The reception signal improved dramatically and no drop calls yet.
Notice you will be on the 2G network if you have a Data Plan (which is not my case) but you can always change the network back to WCDMA-GSM when you need faster data download speeds.
Related
My phone - I have ICS - S-OFF Amaze with Energy ROM and I had tried to apply blas0id tweaks.
The problem - In certain areas I don't have phone signal for a few minutes, then suddenly it will show 4 bars for a few minutes. In general the signal seems fickle.
Before ICS upgrade, when I had GB, I always had 4 bars in the same places. I *think* I had good signal with ICS before I did blat0id tweaks, but I am not certain of that. (ICS and the tweaks were within a few days)
My wife's Iphone still has excellent signal in those places. Tmobile Mytouch also has excellent signal in the same places. So something has changed on my amaze and not the cell towers.
What I have done so far -
1. went back to stock ICS by flashing the img file. That did not improve the signal. So then got back to energy
2. Tried another ROM - speedrom. No improvement in signal
3. Tried few apps like fresh network. They did not help
Please help me
What can/should I do? I love my amaze, but if I dont get consistent signal, I will have to replace it
Are there any tweaks that I can try?
How about the custom kernels that have been made for ICS recently, would those help?
Is there a way to increase the power to look for and catch on better signal? I can trade battery life for better signal
Thanks
I have same issue but with WiFi only. I never had GB I hope there is a work around
Sent from my Dark Unicorn Resurrected v.2.5 using xda premium
Found a workaround
This was dumb luck, but when I was trying to play around the app opensignal, it wanted me to set 2G for some of its functionality, since that functionality does not work over 3g. So I went to setup and set Network mode to "GSM Only" from "GSM/WCDMA Auto"
And walla! right after that my signal jumped from 1 bar to 4 bars and has stayed there. I went back to WCDMA and signal dropped, so now I change the network mode only when I need 4G. Its a pain, but at least, the signal is good when I need it.
So with that information, can someone help how I can tweak something to get my 4G and also good signal?
Thanks
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I would like to kno also but let kno what radio u flash from the ruu
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
I checked the version of my software and I think I already have R2
Build number
2.14.531.3_R2 CL373265 release-keys
So not sure if that would change anything
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
kenneth11414 said:
try updating the radio if you have done so, even though you are going to have to go through the process of locking the device again and unlocking the bootloader again, that would be an idea to try, we still dont know what changes R2 radio update has done but its deff worth a shot
Click to expand...
Click to collapse
Krazex2005 said:
I have always had this problem as well sometimes I have 4 bars of signal then it drops to the X as in no signal,can't make calls or sends texts until it picks up again, happens totally random don't think it has to do anything with tmobile coverage since I live in the center of Miami. Also most of the time I have 2 bars of signal in most places, I believe it's faulty hardware
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Krazex .. did you try to set your network mode and see if that helps your signal stick around longer and get better signal? That is working well for me.
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
I've tried setting my network to GSA and my data speed dropped to 2G.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
yup, that's what this setting is supposed to do, but it increased the quality of my phone signal, that is what I am trying to make better/consistent. Because even after all the bells and whistles, calling someone/receiving the calls is the primary purpose of the phone for me and if that doesn't work, the phone doesn't work for me
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
RZJZA80 said:
My amaze won't get 4g in my house whatsoever, only switches to 2g when it feels like it.
Sent from my HTC_Amaze_4G using xda app-developers app
Click to expand...
Click to collapse
Guys, OP here. This question/workaround is not about getting 4G. I am getting 4G just fine. Its about the phone signal (the bars). My amaze does not get good phone signal in some areas and when I set the network mode to GSM only (2G), phone signal strength and stability increases. and now I want to figure out how I can keep the setting to 4G and get a good phone signal
Silentbtdeadly said:
A new sim card is a good idea.. so is removing the back cover and cleaning off the contacts with a q-tip and some rubbing alcohol. Taking something and SLIGHTLY bending out each of the gold contacts so they make better contact with the case, making sure there is no debris.
Another thing to look into- there is a TON of hacks for cellphone signal that can be done in build.prop.. playing with those settings is probably a good idea.
The last idea- the signal is actually NOT different. The number of bars it shows you is now just more ACCURATE. You still lose signal in ONLY the exact places you would have before.. but now when your phone would show you as having 1 or 2 bars(on gingerbread) right before you lose all signal, on ICS it shows you as having NO bars because you truly have almost lost the signal. It is VERY accurate, now that I am in an area with bad signal.. I have actually flashed gingerbread again and things did NOT get better, there was just fewer bars that weren't as accurate. But I lost signal in the same spots, and would lost 4g in the same exact spots..
Click to expand...
Click to collapse
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help. The sim card was new when I got my amaze .. but no harm in trying. So I will ask for a new sim card too.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
tnkrer said:
Hi SBD, thanks for coming in. I will look into build.prop (ro.ril properties I think) I will also clean any dust inside the phone, may be that will help.
However, in my case, I have a different experience. This is what I did in a weak signal spot.
Have 4G on. I get 0 signal. Can't make a call
go to 2G at the same spot, I get 2-3 bars. I can make a call
I used opensignal app to check signal strength in both cases. with 4G it showed 0. With 2G it showed 42%
Another test. On my route to drop kids off for their day camp, I was on a call (with 4G on) and dropped the call twice (bad reception areas) while going. I switched it to 2G and while coming back did not drop the call.
Before I found this workaround .. people called me and complained that it directly went to voicemail and I never got the call. (no signal). Since I found the workaround, I haven't heard that from anyone.
So I am convinced that there are some real issues in catching the signal with 4G on that get resolved in "2G only" mode. (may be it has to do with the kind of cell towers we have in our area and nothing to do with the phone)
will update if I find more
Click to expand...
Click to collapse
Yea, it should be lines that have ro.ril that youd eant to change.. and fortunately one of those that you can add(it isn't included by default) will do exactly what you need, default to 2g signal when 4g is too weak. I actually need the same thing, in Jacksonville we have great signal.. except in this new place I moved into. It drains my battery by trying to stay with 4g.. but I don't have time before work to find it.
Look for a tthread by "master&slave" titled something like "super build.prop tweaks" in the vibrant forums, I THINK they had that line.. otherwise google around for something like "build.prop signal tweak" as if it isisn't in that thread, there's a really good one on some other forum.
Also, I remember there being some app that requires root that allows you to toggle between GSM preferred and 2g only.. it changes it at system level, and I don't think it was on the play store, I think it was on Xda.
But yea, I understand your dilemma, and until we get an alternative radio to flash(which I don't forsee), that is the kind of workarounds you need. If you find a reasonable solution make sure to post as it will help me too!
Sent from my nook color until my broke college students azz can afford the new nexus 7 tablet.. if my post from my nook color helped you, you COULD consider a donation..
Found that thread
http://forum.xda-developers.com/showthread.php?t=1151608
and a few others
http://forum.xda-developers.com/showthread.php?t=1227269
http://androinica.com/2009/12/hack-for-rooted-phones-promises-faster-2g3g-speeds/
http://forum.cyanogenmod.com/topic/9781-buildprop-roril-meanings/
I will try to figure out what these different ril properties control and which one to modify .. will report after my experimentation. I haven't found a good comprehensive explanation of all those properties yet.
Glad I'm not the only one...
hasoon2000 said:
GSM = 2G
WCDMA = 3G/4G
Get a new SIM card.
Click to expand...
Click to collapse
I have had this problem ever since I got my phone in October (right after launch). Updating to ICS didn't help. i've been planning to root and try another ROM, but so far have been skittish as this is my only phone. hasoon, you say it's the SIM card? I am trying the switch to GSM only to see if it makes a difference. My problem is at home - I have terrible service and I live on a mountain with cell phone towers everywhere. My daughter's AT&T and my old AT&T Nokia E71x had excellent service there. I'll let you know if this helps. Maybe a trip to my local t-Mobile store is in order.
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
soundping said:
It's not the sim card. I noticed on google a lot of people have this problem with htc phones. It's just a bad radio.
Sent from my HTC_Amaze_4G using xda premium
Click to expand...
Click to collapse
We know. If you wanna help read my post number 16 or try some of the links he posted in 17.. we just need a decent workaround.
Hi, bought the xperia Z2 a week back. In my room I get good signal. Sometimes HSPA + but when i go down floor to to the dining area (where i have been seeing poor signal) the Z2 looses it signal then comes back to EDGE after half a minute. My old phone Iphones 4s, HTC One when it lose HSPA signal it goes back to EDGE.
My network setting is on 4G preferred. I have put it on WCDMA preferred still the same problem. On the same network i carried a Iphone 5 and the Xperia Z2, the z2 dropped but the iphone signal stays.
Any way to fix it? or whats causing the problem?
maximus_android said:
Hi, bought the xperia Z2 a week back. In my room I get good signal. Sometimes HSPA + but when i go down floor to to the dining area (where i have been seeing poor signal) the Z2 looses it signal then comes back to EDGE after half a minute. My old phone Iphones 4s, HTC One when it lose HSPA signal it goes back to EDGE.
My network setting is on 4G preferred. I have put it on WCDMA preferred still the same problem. On the same network i carried a Iphone 5 and the Xperia Z2, the z2 dropped but the iphone signal stays.
Any way to fix it? or whats causing the problem?
Click to expand...
Click to collapse
sony has taken note of mobile band issues, should be fixed in upcoming updates
Envious_Data said:
sony has taken note of mobile band issues, should be fixed in upcoming updates
Click to expand...
Click to collapse
Great to hear that i am not the only one facing this problem. how do you know?
maximus_android said:
Great to hear that i am not the only one facing this problem. how do you know?
Click to expand...
Click to collapse
its a common sony problem for mobile data to not work in some countries
is also common for Z2 for data to randomly stop
its also been noted on sony sites and sony team 7 dev mentioned it too
Hi all! First post in the Alpha section... Got my Alpha the other day. And i love all about it. But there is one thing thats gets me wondering. It's the reception. All my previous phones got good reception at home.. i get 1-2 bars. So my question is. Does anybody experience this issue? I have experienced SMS delays and chipped calls.
Location : Sweden
Provider : Telenor
Look at actual signal strength in dBm. Bars are arbitrary and vary from phone to phone.
phositadc said:
Look at actual signal strength in dBm. Bars are arbitrary and vary from phone to phone.
Click to expand...
Click to collapse
Yeah, i have.. it's lite around -110 .. My Z2 had around -70 to -80 in the same region..
pattsy said:
Yeah, i have.. it's lite around -110 .. My Z2 had around -70 to -80 in the same region..
Click to expand...
Click to collapse
Ah ok. That's a bit concerning... Huge difference.
phositadc said:
Ah ok. That's a bit concerning... Huge difference.
Click to expand...
Click to collapse
It could just be a faulty device... I'll try replacing my sim first. If that's the issue.
If that's not working. I'll have it replaced.
Edit: Had my sim replaced. Still experiencing bad reception. It goes as low as -105dbm... where my z2 had around -70 (same network, same location)... that's bad. Any ideas what I can do to solve this?
Yeah keep me updated - my Alpha also seems to have noticeably weaker reception than my iPhone on 4G (800mhz band).
Hoping its a modem firmware/software power output thing and not a hardware thing.
Same here, looks like the reception is 1-2 bars worse than other phones.
But I have no experience of delayed SMS or failed calls and the speeds on internet is very good.
Location: Sweden
Provider: Telia
seem like Iphone 4s signal problem with metal frame blocking antena-reciver,hmmm
Signal problems
Hi, I'm on my second Alpha and first sim, I have an alternative sim yet to try but have chated on Twitter with another user who found no improvement with a new sim and changed phones completely. I'm with three. My signal goes completely when I'm sitting with other three users whose phones work fine. I think it's a phone fault and am considering sending it back now.
Hi guys,
I noticed something interesting with my Alpha:
As you, I have a poor signal strength. But when calling someone then the signal bar jump to full force instantly!
Could it be a link with BIG little technology?
KiDimel said:
Hi guys,
I noticed something interesting with my Alpha:
As you, I have a poor signal strength. But when calling someone then the signal bar jump to full force instantly!
Could it be a link with BIG little technology?
Click to expand...
Click to collapse
Well, for those who have the same problem, I deactivated the 4G. Then the signal strength is better. I made the test: 2 bars with 4G enabled in network settings, full signal when 3G only.
As a possible future Alpha owner, question.
Are you on a USA Network with the Qualcomm Alpha ?
Or in Europe on Exynos Octacore ?
robertkoa said:
As a possible future Alpha owner, question.
Are you on a USA Network with the Qualcomm Alpha ?
Or in Europe on Exynos Octacore ?
Click to expand...
Click to collapse
I am using a european Exynos one
The alpha is my second LTE able phone. Both showed a completely different signal bar reading when using LTE (and checking in lecture, how Signal strength is meassured for GPRS/EDGE/UMTS/LTE it shows, that LTE uses a completely revised scheme to calculate the signal strength)
I haven't made any speed measurements yet, but my feeling is:
(4G) With LTE, even without any highlighted bar i can use internet, webpages load fast, other lookups work.
(3G,3.5G) With H/H+ , and at least 1 bar highlighted, internet works
(2.5G) Edge and at least 1 to two bars, internet is available... three bars are better for it to be worthwhile
(2G) G only - forget it. I'll need 4 bars to surf the web, and i must wait. Chat works if i'm lucky and got at least 1-2 bars.
Apart from that: the signal bars in 2G and 3G show the strength of the signal - but aren't any measure of the quality of the signal. They show anything that sends on the frequency/timeslot of the 2G/3G signal you're receiving. If you've got heavy interferences, you'll get full bars but it all is static.
(Like - in a disco, you've got loud music, and people speaking very loudly to you - that would be full bars, but not the best place to speak to each other....)
I don't understand exactly what the value used by 4G exactly means, but it sounds like it only represents the LTE cell you do want to receive - so it should be more accurate and cutting out the noise somehow
I think you're right ! This is my feeling too. In 4G calls are always perfect for me even with one bar.
In settings we can also have a more accurate highlight on to the signal strength in Db.
Guys this alpha is full of mysteriousness !
I think samsung did it ON purpose.. ! Save battery??
I have weaker signal too.. on iphone 5 is full and i had on my former Honor 6 full as hell..
But I dont konw IF samsung wants to save power by this .. I think it has no much influence as iphone 5 nor Honor 6 had full signal and battery never got down fast.. when I had Honor 6 100% at night it was 98 % in morning..
Another thing with aplha ,when i leave phone in sleep half hour or longer , th emobile network stops and wont come up...
I have to restart phone or turn airplane on ad off.. then H+ or 4G appears..
I have the issue with mobile data too, it seems to also do it when it has been on WiFi for a while and you change to mobile data.
no service
Hey guys,
I have a very bad reception with my Samsung Galaxy Alpha when i'm in the subway in Paris. To be honnest I have no service, no sms, no calls, and for sure no internet...
I can see people using their smartphones inside the subway without problems.
I had an iPhone 4 during 3 years, and didn't have any problem with it when I was in the subway.
I'm using the same phone carrier "Bouygues Telecom"
So what's wrong with this Galaxy Alpha ?
MaskedMarauder said:
I have the issue with mobile data too, it seems to also do it when it has been on WiFi for a while and you change to mobile data.
Click to expand...
Click to collapse
it disables data carrier APN and it won't turn it auto i went it that settings and had to tap that circle manually to get green .. think it is bug .. need sorting out updating software..
---------- Post added at 09:00 PM ---------- Previous post was at 08:58 PM ----------
safnyght2 said:
Hey guys,
I have a very bad reception with my Samsung Galaxy Alpha when i'm in the subway in Paris. To be honnest I have no service, no sms, no calls, and for sure no internet...
I can see people using their smartphones inside the subway without problems.
I had an iPhone 4 during 3 years, and didn't have any problem with it when I was in the subway.
I'm using the same phone carrier "Bouygues Telecom"
So what's wrong with this Galaxy Alpha ?
Click to expand...
Click to collapse
looks lik eit might be a software problem .. we need to contact samsung bout it or complain on their site.. but guys all of us we must complain not just one person cos they wont sort it out..
Hey people,
I'm also having connection issues:
When I boot the phone it's working is at should: Switching between 4G/3G/EDGE etc. After a while the connection sort of times out. I can only make emergency calls. It works flawlessly for up to a day, or it can only work for like 5 minutes.
Rebooting the device fixes this temporarily. My service provider (Hi in NL) has already sent me a new simcard which doesn't help. They are now saying I should send it over for repair.
Btw: When i leave it in CDMA only, the problem takes much longer to arise (like a couple of days).
I can see that people who have posted in this thread are having the same issues. I'm wondering if this is firmware or hardware related, as I want avoid sending over my phone. If it IS a firmware bug, sending it over for repair obviously isn't going to fix this.
I have sent an e-mail to Samsung BeNeLux. Like Simona Simmy says, we should all write to Samsung
Had my x1 for a couple of days now and lots to like about it however I have noticed that it seems to have a very weak phone signal reception.
I am on three in the UK and in the normal areas I travel I have never noticed an issue on my other phones with it struggling to hold on to signal bars.
Anyone else have this?
Signal bars mean absolutely nothing. Many oem even show full bars even when there is actually no signal.
Better install cellmapper app that will exactly show and record the signal where you travel.
Also, do you have 3uk volte working?(calls over 4g network)
Well all I can say is that I live less than a mile from the nearest mast and would nearly always have full signal bars on other phones yet on this phone it drops on and off 1 bar.
I will download the app you mentioned and see what that shows
I've had this problem with numerous Sony phones over the years, always poor signal compared to Sammy's, Pixel's and iPhones that I've had. Same issue with the X1 I have now, always on WiFi calling and no signal, my Pixel 3 XL would be happily sitting on 4G.
andybg40 said:
I've had this problem with numerous Sony phones over the years, always poor signal compared to Sammy's, Pixel's and iPhones that I've had. Same issue with the X1 I have now, always on WiFi calling and no signal, my Pixel 3 XL would be happily sitting on 4G.
Click to expand...
Click to collapse
Glad it's not just me then.
I do remember having this issue on a previous Sony phone also but can remember the model now. It's been a long time since I had a Sony but thought this one was going to tick every box which it almost does apart from having reliable signal reception which is really should be a must!
Is there anyway they can improve this with software of are we stuck with it due to hardware issues?
I'm in my 14 days returns periods at the moment and like everything about this phone apart from what it should do first and foremost
I am having the same problem, I'm on EE and my LTE keeps dropping from 4 bar's to 1 bar then nothing which causes me to lose data connection. It then jumps to 4 bar's again and then repeats this over and over. This is happening at home where I always have full reception. I have tested my sim in 5 different phones all have full reception and don't lose connection only my Xperia 1 does! Any help would be appreciated.
Same problem for me. I switched my SIM from Galaxy S8 to X1. S8 has 4 to 5 bars while X1 struggles with getting one bar at home.
Ffs... The bars mean nothing. Sony phones take into consideration RSRQ(signal quality) and SINR(s noise) values of the signal. Other oem don't. The actual signal power RSRP (do not confuse it with bars) is same or better on Sony.
Xperia 1 has most advanced modem and antenna setup of any 4g phone. 4x4 mimo even on low bands (first to have it).
3uk and ee are special in the sense that they need phone to support volte to get access to their low band spectrum(band 20).
So make sure you have volte aka 4g calling enabled and check with apps like Netmonster or Cellmapper the band and RSRP of the signal. Then compare it with other phones at the same place.
VeixES said:
Ffs... The bars mean nothing. Sony phones take into consideration RSRQ(signal quality) and SINR(s noise) values of the signal. Other oem don't. The actual signal power RSRP (do not confuse it with bars) is same or better on Sony.
Xperia 1 has most advanced modem and antenna setup of any 4g phone. 4x4 mimo even on low bands (first to have it).
3uk and ee are special in the sense that they need phone to support volte to get access to their low band spectrum(band 20).
So make sure you have volte aka 4g calling enabled and check with apps like Netmonster or Cellmapper the band and RSRP of the signal. Then compare it with other phones at the same place.
Click to expand...
Click to collapse
If it's as simple as that why is it not enabled on this phone already?
I think what you seem to be over looking is the fact that I and others here have said that yes the bars are lower than other phones and flutter slot but also to the point where they drop completely and give no reception at all. A situation not faced on other phones.
Can you explain how we enable this missing band so that the phone can provide a more reliable/stable reception
Does your phone have 3uk volte(4g calling) enabled? Phone should stay in 4g during call. If not then you are out of luck.
ee users can install EE firmware to get Volte working if it's not already . newflasher on xda helps to change firmware.
And please compare signals with abovementioned apps.
hpsauce37 said:
Glad it's not just me then.
I do remember having this issue on a previous Sony phone also but can remember the model now. It's been a long time since I had a Sony but thought this one was going to tick every box which it almost does apart from having reliable signal reception which is really should be a must!
Is there anyway they can improve this with software of are we stuck with it due to hardware issues?
I'm in my 14 days returns periods at the moment and like everything about this phone apart from what it should do first and foremost
Click to expand...
Click to collapse
If you're having signal drops / dropped phone calls etc... I get it. But Sony is historically notorious for showing lower signals than others on those bars. However, as stated, the bars are pretty meaningless. I've owned many Sony's, and while the bars are lower (sometimes all empty), I still have signal in all the places I should. YMMV.
VeixES said:
Does your phone have 3uk volte(4g calling) enabled? Phone should stay in 4g during call. If not then you are out of luck.
ee users can install EE firmware to get Volte working if it's not already . newflasher on xda helps to change firmware.
And please compare signals with abovementioned apps.
Click to expand...
Click to collapse
I don't honestly know. My phone was purchased sim free from carphone warehouse and I use it on 3 network. The phone just set itself up. How would I check this? Is it something listed under network settings?
It's so frustrating as I'm really loving a lot about this phone but just want it to be comparable at least with my other phones I've used with call reception
those who are having signal problem, are you using EE network?
I saw lots of people with EE reporting this issue on official sony forum.
Got mine yesterday from Vodafone and signal is perfect !
XSIIS said:
those who are having signal problem, are you using EE network?
I saw lots of people with EE reporting this issue on official sony forum.
Click to expand...
Click to collapse
Yes
I also have only 1 bar... Orange.
If you are EE UK user, then you need EE firmware on your Xperia 1 to get best network compatibility(Volte and low band support because of it).
3UK users probably need also 3UK firmware but that does not seem to exist yet.
This weirdness of low band access is specific to two UK operators. Everywhere else the device is fully capable of best 4g experience.
Wait Next update
Enviado desde mi G8141 mediante Tapatalk
So for those of us on three network but purchased the phone sim free are stuck with the problem as three do not sell this handset themselves so unlikely to release any firmware for it.
That does not look good for me so I think I will need to return within my 14 days.
Shame.
There's definitely a network connectivity issue with the XP1 right now though. This seems to affect only XP1's on the EE network, which were *not* bought from EE direct, i.e. ones with stock firmware. (e.g. mine!)
The symptoms are that periodically, first the 4G symbol disappears, then the signal goes to zero and you've lost the internet. Then it reconnects back onto 4G again. Sometimes this repeats 3 or 4 times in succession. The whole thing takes from 5 seconds to maybe 30 seconds depending on how many re-tries.
You can go for maybe an our or so without a problem, or sometimes it happens like every 10 minutes.
And here's the key part: this happens wherever you are, even on a full strength signal. As far as I can make out, this affects ALL XP1s with stock firmware on EE. EE say it's a Sony problem. Sony say it's a network issue. So we are all stuck.
Does anyone know of a suitable network logging app, which will log 4G disconnects and signal loss, so we can provide evidence to EE and Sony?
More info here:
https://talk.sonymobile.com/t5/Xperia-1/Issue-with-network-dropping/td-p/1376332/highlight/false
(My phone is fine with a Vodafone sim. There's something specific to the phone firmware/config - timers, buffer sizes, packet sizes - whatever - and the EE network. But right now, on EE, it's unusable.)
Been noticing that my signal drops more than normal at home and at work since swithching to the xperia, Used to have both a Note10+5g which would get consitant 5g at full signal, and the same for my Oneplus 9Pro, But with the xperia ill get 1-2bars 5g in the same room if it hasnt dropped to 4G at 2 bar or 3G. Mobile network EE
{Moderator Announcement: Thread title edited due to language. - Oswald Boelcke, Moderator}
Just switched from OP10 Pro to Sony and I noticed this same thing. With my OP10 Pro I usually got very good signal, but with Xperia the signal is very poor.
Me as well, especially on WiFi. My router supports only WiFi 4 and I get poor signal if not directly next to the router.
bobstar3233 said:
Been noticing that my signal drops more than normal at home and at work since swithching to the xperia, Used to have both a Note10+5g which would get consitant 5g at full signal, and the same for my Oneplus 9Pro, But with the xperia ill get 1-2bars 5g in the same room if it hasnt dropped to 4G at 2 bar or 3G. Mobile network EE
{Moderator Announcement: Thread title edited due to language. - Oswald Boelcke, Moderator}
Click to expand...
Click to collapse
I switched from Nothing Phone 1 to Sony and I noticed this same thing. With my NP1 I usually had a very excellent signal,
Okay glad it's not just me, but I wonder why it's like that now
Phew, I am not alone. Mine works poorly with Wifi 6. Any ideas to fix?
I've noticed this also, and the Bluetooth connection (with Sony's WH-1000XM4 and WF-1000XM3) is also very weak.
ov_darkness said:
I've noticed this also, and the Bluetooth connection (with Sony's WH-1000XM4 and WF-1000XM3) is also very weak.
Click to expand...
Click to collapse
I have noticed this bluetooth issue only when screen is Off? How about you?
I'm also switching from xperia 1 to 1 IV and bought a metal frame case for the phone with a lower signal, the signal has dropped even more I don't use a case anymore
Unfortunately, the GPS signal is weak a lot of times and stops navigating.
XmlNode said:
Unfortunately, the GPS signal is weak a lot of times and stops navigating.
Click to expand...
Click to collapse
Will this signal issue be fixed with an upgrade?
I do hope that Sony will fix these soon.
Signals should not be an issue in 2022. However, be aware that the GPS is only a single-band one, despite some specs around the net.
bobstar3233 said:
Been noticing that my signal drops more than normal at home and at work since swithching to the xperia, Used to have both a Note10+5g which would get consitant 5g at full signal, and the same for my Oneplus 9Pro, But with the xperia ill get 1-2bars 5g in the same room if it hasnt dropped to 4G at 2 bar or 3G. Mobile network EE
{Moderator Announcement: Thread title edited due to language. - Oswald Boelcke, Moderator}
Click to expand...
Click to collapse
Hi, I just realized the solution.
Please install voWIFI app via play store, disable DSDS, and you are done!
If you totally missed your Antenna, be sure that u are using the first sim slot for your sim card
afshineb said:
Hi, I just realized the solution.
Please install voWIFI app via play store, disable DSDS, and you are done!
If you totally missed your Antenna, be sure that u are using the first sim slot for your sim card
Click to expand...
Click to collapse
I'll see if this does anything, initally it looks like it did nothing but it's too early to tell as it could just be where I am right now
Skaterkemal said:
I'm also switching from xperia 1 to 1 IV and bought a metal frame case for the phone with a lower signal, the signal has dropped even more I don't use a case anymore
Click to expand...
Click to collapse
Same here. It looks so nice with metal case. Call quality not that great also
Metal cases do degrade network signal very much. be it of any kind, GPS, carrier signals, Bluetooth and WI FI.
Sony uses its signal scale in quality, the rest of the companies in power.
I didn't get a 1 IV until the Android 13 release, upgrading from a 5 III. I also use a work iPhone 11 regularly. I'm in the US and my phones are all US market models, and I live in a large metropolitan area. Both of my phones are in carbon fiber cases with metal in them. Here are my observations, which seem to be more positive than what is posted here.
Wifi: My home network is Wifi 6, and the signal on the 1 IV is usually weaker than the iPhone 11. But, it's only by 1 or 2 dbm, per the data from my router. However, if you run a speedtest on both phones, the Xperia 1IV always gives a higher Mbps reading than the iPhone.
BT: I have WF-1000XM3 and M4s and both work fine on both phones. I can get further away from the phone with either headphones from the iPhone than the Xperia, but the Xperia works fine if it's sitting next to me or in my pocket. No issues with connecting to other devices like speakers or car stereos.
Cellular: My 1 IV is on T-Mobile, while my iPhone is on Verizon, so hard to compare there. However, my wife has an iPhone 14 Pro Max on T-Mobile, and in spot comparisons, my Xperia gets better reception and faster data connectivity. When I'm on 5G, my Xperia regularly gets over 1Gbps download speeds, even without full bars on the signal meter.
I am from Croatia and I have very poor 3G signal, 2G, 4G and 5G signals are OK so in my home there is no 3G signal at all and I am not available because my network doesnt have VoLTE. I am on 64.1.A.0.882 firmware. Before I would have signal problems but restart would fix that. Now, after restart nothing is fixed. Till now I reset my phone 2 times and it was on service repair because of fingerprint sensor. 2 days ago everything was OK. I don't know what is going on. Is there any fix? Could this be Google Play System problem? Because yesterday I got another Google Play System update of 9 MB for March and around that time this problem started and I don't see any fix.
I manage to solve problem. I call this code in the phone *#*#4636#*#* and it opens Testing. In there I went to
Phone info --> three dots --> Select radio band --> Automatic
and after that everything start to work. I don't know what radio band was set before because I couldn't read that. I gess that every time when problem happens I'll have to do this.