Resurrection remix ICS pro v1.1 charging vibration problem - Galaxy S II Q&A, Help & Troubleshooting

When I connect the charger to my phone,my phone won't vibrate or ring,anyone here have same problem with me?

It's strange but you can try to reflash the rom and you must always wipe dalvik cache. i had this rom but it was perfect

I used 1.1 for a while, and I can't remember having this issue, or having read about people having it. So I agree with Ubbabubbah, reflash

Related

[Q] no sound on toxic 8 rom

i recently download rom toxic 8 and i dont get any sound on my calls when i start to charge my phone and then i unplug the charger... i have to turn off the phone and turn it back on so it can start working...can somebody help me plz???
Need more information, such as what steps you took in flashing the ROM, what kernel you're using, etc. Also, have you already tried a clean install of Toxic8, or tried clearing the cache and dalvik cache and fixing permissions?

[Q] Unwilling phone startup

When i turn off my phone and plug charger in ,it will automaticaly turn on after 2-3 minutes (I want to stay turned off) . I am on turkbey rom v 30.1 and newest siyah kernel 2.6.5 . Has enybody similar problem ? I have tried to wipe cache and dalvick cache and problem still remain .
Sorry for my English and thanks for answers.
Solved - it is a problem with newest siyah kernel
try cleanig the charger port.It may just be dirty.
OP glad you worked out your own problem...

[Q] dialer hangs in very weird way

Hello all,
I have ICS (4.0.3 XXLPH kernel and modem), resurrection ROM 9.3 on my SGSII, when every I try to dial any number directly it hangs, and I need to press home button, and the dialer kept hanged, I tried to resinstall the ROM again and again, full wipe of course, clear cache clear dalvic and fix permissions, this happens to me since ICS resurrection 9.1, I beleive there is something wrong with me only cause no one adviced about this in the ROM section.
if you have any idea or any experience you may share, please do it and I will apprecite it
note: I can not dial any number at all since 1 month , I can only call the numbers I have them saved. the problem solved when I rstart the phone for sometime only, thne back to be slow, then complete stuck
alot of thx
Bye
Salloum
just want to draw your attention, that after hangs, a massive battery drain happens to my phone, and I can feel the heat around the back camera.
As the rom is built on a leaked buggy beta test rom ICS expect problems that's what beta means .
Problem unlikely to be the phone and it now has no warranty .
jje
even it only happens to me... but it's right what u said, this is what beta is made for ... alot of thanx for your reply , I will try to install another ROM soon
This is happening on my phone too! strange! have you found the culprit of the issue? Can share with me?
ahm_salloum said:
Hello all,
I have ICS (4.0.3 XXLPH kernel and modem), resurrection ROM 9.3 on my SGSII, when every I try to dial any number directly it hangs, and I need to press home button, and the dialer kept hanged, I tried to resinstall the ROM again and again, full wipe of course, clear cache clear dalvic and fix permissions, this happens to me since ICS resurrection 9.1, I beleive there is something wrong with me only cause no one adviced about this in the ROM section.
if you have any idea or any experience you may share, please do it and I will apprecite it
note: I can not dial any number at all since 1 month , I can only call the numbers I have them saved. the problem solved when I rstart the phone for sometime only, thne back to be slow, then complete stuck
alot of thx
Bye
Salloum
Click to expand...
Click to collapse

Phone not turning on

Does anyone else have the problem where sometimes the phone won't switch on (using either the Home button or the screen on/off switch). I need to remove the battery to get it back to life. I'm running ICS (Resurrection Remix 1.1), and have tried wiping the Dalvik cache but got the same problem again afterwards.
I did post a question in the Resurrection thread but it got buried amongst the other questions....
Have you tried a factory reset yet ? If you have/do & that doesn't improve things, maybe do a fresh clean install of your rom.
If the problem persists after that, go back to stock & see if you can reproduce the problem. If you've still got the problem after doing this, we'll cross that bridge after/if we get to it.

[Q] Please you can help me with my problems with i9100?

Ok,from the beginning i want to tell my story with that phone. I bought him from a friend with a normal price and hadn t no problem at all,but upon a few weeks suddenly the home button starts to have a delay of 5-10 seconds,the proximity sensor exactly like home button (delay) ,the screen didnt rotate ,but the autorotation is activated,and when i want to do a calibration of this sensor,stuck a minute or two and after say that is calibrated but nothing happens . A week ago, i root my phone and try a lot of custom roms,but nothing helped yet 3 days when i install Sensation Rom ,and miracle,for two days everything works like anything doest happend,but after it stuck again.. please help,what can i do? it s a file damaged,or is a hardware problem ? a lot of thanks
Iubirica said:
Ok,from the beginning i want to tell my story with that phone. I bought him from a friend with a normal price and hadn t no problem at all,but upon a few weeks suddenly the home button starts to have a delay of 5-10 seconds,the proximity sensor exactly like home button (delay) ,the screen didnt rotate ,but the autorotation is activated,and when i want to do a calibration of this sensor,stuck a minute or two and after say that is calibrated but nothing happens . A week ago, i root my phone and try a lot of custom roms,but nothing helped yet 3 days when i install Sensation Rom ,and miracle,for two days everything works like anything doest happend,but after it stuck again.. please help,what can i do? it s a file damaged,or is a hardware problem ? a lot of thanks
Click to expand...
Click to collapse
Hard to say.
Could also be a hardware issue.
I recommend to flash back stock ROM with stock kernel.
Maybe you have to wipe data (do factory reset).
Then check again.
Good luck !
It_ler said:
Hard to say.
Could also be a hardware issue.
I recommend to flash back stock ROM with stock kernel.
Maybe you have to wipe data (do factory reset).
Then check again.
Good luck !
Click to expand...
Click to collapse
I tried once to flash stock rom,with original kernel and modem,but i view another problem wich in custom rom dont appear,like ..i cant answer,the green or red slide its stuck and those problems even..i wipe a lot of times, i do factory reset ,but nothing..just,how works for those days when i install sensation,i dont know,its a mistery
Are you using micro-sd card ? if so remove it and turn the device on.
PsyOr said:
Are you using micro-sd card ? if so remove it and turn the device on.
Click to expand...
Click to collapse
i dont have a micro sd card
nothing?:|
Iubirica said:
nothing?:|
Click to expand...
Click to collapse
You've already done the extreme of reinstalling a stock ROM and performing a factory reset. I'm also assuming you didn't install a bunch of apps before the problem started, though.
My advice would be: go back to stock ROM again, factory reset, and SLOWLY reinstall your apps. This will help narrow down what app could be causing your issue. (if it is an app)
No bumping threads after 54 minutes. Not cool. People here aren't at your beck & call :-/
Iubirica said:
nothing?:|
Click to expand...
Click to collapse
ctomgee said:
You've already done the extreme of reinstalling a stock ROM and performing a factory reset. I'm also assuming you didn't install a bunch of apps before the problem started, though.
My advice would be: go back to stock ROM again, factory reset, and SLOWLY reinstall your apps. This will help narrow down what app could be causing your issue. (if it is an app)
Click to expand...
Click to collapse
Thanks..right now i will try your advice,and i come with a feedback
MistahBungle said:
No bumping threads after 54 minutes. Not cool. People here aren't at your beck & call :-/
Click to expand...
Click to collapse
sorry for that ,but this site is my only hope
i tried ..i put the stock rom without any apps installed.but i had the same problems..by example when i want to delete a widget from the screen the phone stucks a few seconds,and the came to normal..the home button had the same delay and the proximity sensor works with the same delay,when i want to close a call ,stays a 5-10 seconds to light up the screen..i dont know,what is with him,i m disperate
..and what is strange,by example when is on charge ,the home delay dissapeared,works normally,but the rest of the problems remain
comeone..nobody knows anything about my problems with phone?
1.send it to Samsung for warranty.
2.get your money back from "friend".
I think i had similar problems with you previously, even worse maybe. Battery shows charging while cable is unplugged. Some of the time it pops up a warning message "Unstable Voltage". I did the same thing as you, flashing roms, wiping x " i forgot how many times", factory resetting X times and so on. What solved the problem for me was ;
-> i took out the battery
-> left phone untouched for several days
-> put the battery back -> charged till full
-> wipe data, factory reset, wipe battery stats, wipe cache,dalvik as well, FIX permissions
-> flash latest stock rom ( 4.0.4 at that time )
-> reboot phone
-> root again ( flashing stock rom loses root ) using CF-Root
-> reboot to CWM recovery
-> wipe data, factory reset, wipe cache,dalvik as well, FIX permissions
-> flash PA (Paranoidandroid ROM - please follow the instruction from OP post) via CWM
->wipe data, factory reset, wipe cache, FIX permissions
-> reboot phone
-> wait for apps updated and then reboot to recovery and FIX permission for the final time and VOILA!!
The phone works great up till this moment. Not sure if you gonna solve your issue with the way i did it but might worth the try. Nothing to lose anyway it seems as you were hardcore-ing flashing roms and wiping data and such. Good Luck!
Certainly that i hope this will be able to relieve you of the unnecessary distress.
alexct said:
I think i had similar problems with you previously, even worse maybe. Battery shows charging while cable is unplugged. Some of the time it pops up a warning message "Unstable Voltage". I did the same thing as you, flashing roms, wiping x " i forgot how many times", factory resetting X times and so on. What solved the problem for me was ;
-> i took out the battery
-> left phone untouched for several days
-> put the battery back -> charged till full
-> wipe data, factory reset, wipe battery stats, wipe cache,dalvik as well, FIX permissions
-> flash latest stock rom ( 4.0.4 at that time )
-> reboot phone
-> root again ( flashing stock rom loses root ) using CF-Root
-> reboot to CWM recovery
-> wipe data, factory reset, wipe cache,dalvik as well, FIX permissions
-> flash PA (Paranoidandroid ROM - please follow the instruction from OP post) via CWM
->wipe data, factory reset, wipe cache, FIX permissions
-> reboot phone
-> wait for apps updated and then reboot to recovery and FIX permission for the final time and VOILA!!
The phone works great up till this moment. Not sure if you gonna solve your issue with the way i did it but might worth the try. Nothing to lose anyway it seems as you were hardcore-ing flashing roms and wiping data and such. Good Luck!
Certainly that i hope this will be able to relieve you of the unnecessary distress.
Click to expand...
Click to collapse
i tried to do all things that you sayed to me,without to leave the phone with no battery several days..dand nothing happend,the problems persist ..i dont know ,i dont have a guarantee,and the cost may be high,thanks anyway
UP
Your friend clearly sold you a dodgy phone. You should demand your money back and use the phone to beat him until he pays. That is my diagnosis and clearly the answer to your "problem".
today after wipe everything and flash de jelly bam rom ,custom kernel etc..doesnt work at all,but i removed the battery for 30 minutes,and when i put it back and openned it ,everything works very well..just a calibrate,and clearly now have no problems..how long it mentain,i dont know,but even now i dont know what it had .. mistery
so,what are you thinking,what is the cause?

Categories

Resources