I am using CM7 miracle edition and I cannot move my dalvik cache as the options are grey out. I have mount ext4 and my sd card has ext4 partition already. Is it because of script problem?
Related
Until today i was using ext3 on my sdcard (single 8gb partition) with slade froyo v3. Then i formated the card to ext4 to se if it was supported. Unfortuly my phone didnt recognized it. So i just reformated back to ext3, but the phone doest regonize it (but until i formated the sdcard he never complained). So now im back to vfat partition. And i would like advices on how to make it acept the ext3 again
Bump......
Bump......
1 more bump
Lately since installing MiniCM7 2.1.6/Kernel nAa-08, my ext3 partition on the SD is randomly mounting or not... I mean, when i reboot the phone, the ext3 partition may be or may be not mounted, then all the applications i have there appears or not (this is how i notice the problem). I have reflashed the rom, formatted and partitioned the sd again, and still is the same, usually at the second reboot the ext3 partition is mounted. Anyone else having this problem? any troubleshoot for this?
Regards,
FcKx
Right this desire is starting to become a problem child to say the least -_-, installed gingerburst 1.0.0.3 pre rooted and S-OFF and suddenly it wont mount my sd card itll mount my 8gb one but not my 16gb one and i need the 16gb one. tried reformatting it in recovery and mounting it via tht but i dno if i did it wrong or something. need the sd card partitioned for data2sd so partition sizes and names and info wud be good, thx
in recorvery it also says under mounts and storage tht "mount /sdcard" so it doesnt mount it auto. i tried mounting it then rebooting but wont mount again. i found under advanced in recovery it has partition sd card i formated it n now ive partitioned it using this method biggest vales ext 4096mb so 4gb and w.e the highest one for the other one was. basicly i want this sd card to be partitioned for data2sd to work good desire has very low internal memory and gingerburst is the best sense rom i found
fixed: i re partitioned it in recovery under advanced after formatting it within recovery in mounts and storage then clicked mount within mounts of storage on the sd card then rebooted. need details for partitioning it now
on my sd card it has a linux swap file a fat32partition n an ext2 partition what partition has data2sd got to be? ext 4 3 2 1?
for sdcard u normally have vfat(fat32) filesystem, when using it as data also (data2sd) you should add any ext partition I would recommend ext4 however some roms might not support that (should be very old roms) so you can make it with ext3.
you can use Gparted or MiniTool Partition Wizard to repartition the sdcard. you can check what filesystem is your data partition using 'mount'.
note that you should have some vfat partition left if you want to use it as a normal sdcard.
Hello,
I have the SD card with 3 partitions one FAT and two ext2. But the system only mount one FAT and one ext2. I would like to mount the third partition any time the system boot.
Is it possible?
Thanks
So ran out of storage in /data partition, decided to create 2 partitions in my external SD and i created it using Gparted, one is ext4 and the other is fat32, now the phone refuses to mount the ext4 partition from Link2SD.
Looking at the vold.fstab file and sysfs paths(/devices/platform/mtk-msdc.0) , it seems that our phone can mount only 2 (+1 otg) partitions ? (or is it just 2 sd cards ?)
is it even possible to mount the second partiton ?? (No /devices/platform/msm_sdcc )
I do know of the EMMC method, i don't like it ;p
A block for the second partiton is present in /dev/block,(mmcblk1p2) gonna mount and see what happens
gowtham121 said:
So ran out of storage in /data partition, decided to create 2 partitions in my external SD and i created it using Gparted, one is ext4 and the other is fat32, now the phone refuses to mount the ext4 partition from Link2SD.
Looking at the vold.fstab file and sysfs paths(/devices/platform/mtk-msdc.0) , it seems that our phone can mount only 2 (+1 otg) partitions ? (or is it just 2 sd cards ?)
is it even possible to mount the second partiton ?? (No /devices/platform/msm_sdcc )
I do know of the EMMC method, i don't like it ;p
A block for the second partiton is present in /dev/block,(mmcblk1p2) gonna mount and see what happens
Click to expand...
Click to collapse
hi, gowtham121
ROOT your phone first,
create 2 partitions as fat32 on sdcard
its work on my chd:fingers-crossed: