I am aware this has perhaps been asked previously, but I believe my situation is different.
I have two phones, both are the atrix, the one I use as my mp3 player will be the one I am inquiring about.
I am looking for a rom to use with the lapdock, not hdmi mirroring I know that is a good feature but not what I am looking for. I believe something similar to stock is what I am looking for but not quite sure. Any assistance will be appreciated.
Thank you
In summary, I am looking for a ROM to flash that gives me full use of the lapdock
You can use NottachTrix4G rom which is blur based…you should be able to use lapdock.
by the way, I am rooted and unlocked.
giqbal said:
You can use NottachTrix4G rom which is blur based…you should be able to use lapdock.
Click to expand...
Click to collapse
I tried to install this and the second part of the file becomes corrupt. I have tried multiple times.
mistermetoo said:
I tried to install this and the second part of the file becomes corrupt. I have tried multiple times.
Click to expand...
Click to collapse
Try downloading the second part again.
Sent from my MB860 running Jokersax's CM9
giqbal said:
Try downloading the second part again.
Sent from my MB860 running Jokersax's CM9
Click to expand...
Click to collapse
still not working.
Don't d/l in 2 parts. Download using the Burpsf link. That will be whole file.
Also, if you are using a download manager.............try without it.
CaelanT said:
Don't d/l in 2 parts. Download using the Burpsf link. That will be whole file.
Also, if you are using a download manager.............try without it.
Click to expand...
Click to collapse
I was able to find the burpsf link via google and it worked.
Thank you for the assistance!
why exactly is nottach trix4g listed in 2 parts anyway?
Sent from my MB860 using Tapatalk
ltdanno360 said:
why exactly is nottach trix4g listed in 2 parts anyway?
Sent from my MB860 using Tapatalk
Click to expand...
Click to collapse
File size limitations with hosts I believe.
Lapdock and NottachTrix4G
I have flashed NottachTrix4G 131 with no issues and like it alot....
However, when I use the lapdock the attrix goes into webtop mode, that is to say the screen on the lapdock is as usual while the keyboard and touchpad don't function, but the phone's screen shows the keyboard and touchpad and mouse buttons, and they work on the lapdock's screen.
Unusable that way!
pat0 said:
I have flashed NottachTrix4G 131 with no issues and like it alot....
However, when I use the lapdock the attrix goes into webtop mode, that is to say the screen on the lapdock is as usual while the keyboard and touchpad don't function, but the phone's screen shows the keyboard and touchpad and mouse buttons, and they work on the lapdock's screen.
Unusable that way!
Click to expand...
Click to collapse
same problem and i just got my lapdock what to do!
This might help - search on google for "nottachtrix Webtop on Lapdock" and click on the fist result
I havent had time to find a stock rom, not sure where one is
Try flashing the 2.3.6 fixed webtop from here
http://forum.xda-developers.com/showthread.php?p=24472332#post24472332
pat0 said:
I have flashed NottachTrix4G 131 with no issues and like it alot....
However, when I use the lapdock the attrix goes into webtop mode, that is to say the screen on the lapdock is as usual while the keyboard and touchpad don't function, but the phone's screen shows the keyboard and touchpad and mouse buttons, and they work on the lapdock's screen.
Unusable that way!
Click to expand...
Click to collapse
Had same issue with mine a couple weeks back from onesaleaday. USB connector on lapdock was defective. Its a common problem with all lapdocks. Returned lapdock, Motorola repaired and returned within a week.
Sent from my MB860 using xda premium
CaelanT said:
Had same issue with mine a couple weeks back from onesaleaday. USB connector on lapdock was defective. Its a common problem with all lapdocks. Returned lapdock, Motorola repaired and returned within a week.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
I returned my lapdock to Motorola and got it back, and it STILL did not work.
ToonShadow said:
Try flashing the 2.3.6 fixed webtop from here
http://forum.xda-developers.com/showthread.php?p=24472332#post24472332
Click to expand...
Click to collapse
however, this solution actually resolved it for me, I should have trusted my IT sleuthing skills because I knew the USB connector was working since it was charging properly, let that be a lesson to anyone else searching for a solution, if your phone is charging while plugged in, the USB connector is working properly, this is probably related to the fact that I am using nottachtrix4g which I have seen mentioned before as an issue
Related
Hello xda. I was wondering if anyone has seen anything about a photon webtop laptop dock?
Thanks
I saw it. Don't think it's worth $100. Then you have to buy the keyboard and remote separately? Serious rip off.
CyberCrist said:
I saw it. Don't think it's worth $100. Then you have to buy the keyboard and remote separately? Serious rip off.
Click to expand...
Click to collapse
I'm quite sure OP wrote "laptop dock"...
SoaringSpoon said:
Hello xda. I was wondering if anyone has seen anything about a photon webtop laptop dock?
Thanks
Click to expand...
Click to collapse
There is no laptop dock available yet. There's a dock with remote and a separate bluetooth keyboard.
CyberCrist said:
I saw it. Don't think it's worth $100. Then you have to buy the keyboard and remote separately? Serious rip off.
Click to expand...
Click to collapse
It's been well worth it for me. I set it up at the office on a spare monitor with an old keyboard and mouse, works great.
Im sure you'll be able to get it cheaper on ebay or amazon once it hits stores.
Sent from my photon4g using XDA Premium App
Here's an interesting announcement...
Multiple LapDock Models Coming...
Bandage said:
Here's an interesting announcement...
Multiple LapDock Models Coming...
Click to expand...
Click to collapse
Interesting, but we need to some some ballpark prices. If there's only a $50 difference between the models, I don't think most people will care.
so your saying there is a chance haha, i dont understand why the atrix and this photon wouldnt be able to use the same lapdock, but from the sounds of it..the photon will get one of these correct?
mastermayhm said:
so your saying there is a chance haha, i dont understand why the atrix and this photon wouldnt be able to use the same lapdock, but from the sounds of it..the photon will get one of these correct?
Click to expand...
Click to collapse
Short answer, charging/HDMI spots are in different positions so it wouldnt fit.
yea i noticed the hdmi and micro ports switched.....which really pissed me off that moto would do that, but im suspecting they will put out a lapdock for the photon specifically.
mastermayhm said:
yea i noticed the hdmi and micro ports switched.....which really pissed me off that moto would do that, but im suspecting they will put out a lapdock for the photon specifically.
Click to expand...
Click to collapse
IMO, Motorola is stepping on their own foot. Had they not switched port positions, the Atrix lap dock could have been a huge selling item for the Photon or any other Moto phone which supports it. Why keep investing MORE money for additional docks when this one alone could have raked in a lot of cash.
I'm going to test something that might just work.
We might be able to MacGyver the Atrix LapDock for use with our Photons. Using Micro USB and HDMI Extender cables.
It's not elegant, by any stretch...but would be an easy workaround.
I wouldn't be adverse to having my Photon attached to the LapDock via cables, instead of docked.
If anyone beats me to testing this out, please report your findings.
Apparently at&t has exclusive rights to the laptop dock (using with the atrix) for a period of time. Not sure how long.
Sent from my MB855 using XDA App
jdverley said:
Apparently at&t has exclusive rights to the laptop dock (using with the atrix) for a period of time. Not sure how long.
Sent from my MB855 using XDA App
Click to expand...
Click to collapse
I don't think is long cause the Motorola Bionic is coming out in a few days and it too has a laptop dock
Sent from my MB855 using XDA Premium App
Bandage said:
I wouldn't be adverse to having my Photon attached to the LapDock via cables, instead of docked.
If anyone beats me to testing this out, please report your findings.
Click to expand...
Click to collapse
I had the same thought and am open to trying - my boss has the Atrix and I can use his lapdock.
I've found the usb micro extension on google shopping - has anyone found the mini-HDMI extension
CptnSkippy said:
I had the same thought and am open to trying - my boss has the Atrix and I can use his lapdock.
I've found the usb micro extension on google shopping - has anyone found the mini-HDMI extension
Click to expand...
Click to collapse
Nope...haven't found THAT yet. Maybe they don't make the HDMI one?
Right now it looks like a tangled mess of adapters to make this work.
There is this adapter micro f to hdmi male:
http://www.usbsea.com/products/HDMI_Male_to_Micro_HDMI_Female_Adapter_R-AD-HMHF4.html
Then you need an hdmi f to f like this:
http://www.usbsea.com/products/HDMI_Female_to_HDMI_Female_Adapter_R-AD-HFHF.html
Then you can use your micro to regular hdmi cable.
I'm still looking for a micro hdmi f to micro hdmi m which would be perfect.
Cheers,
Sent from my MB855 using Tapatalk
for anybody interested...
http://forum.xda-developers.com/showthread.php?t=1224993
It's really frustrating that Sprint and Motorola are so far behind on the laptop dock for this phone. I really want this dock so that I can use it for work when I am on call, and not have to lug around a laptop and wait for it to boot up, connect to my hotspot etc. C'mon Sprint, C'mon Motorola! All they need to do is build two parts, a longer cable for the HDMI/USB ports, and a new baseplate for the phone to sit on, this should be nothing to kick those out, since obviously aside from the ports being swapped, it still works on this phone.
Hello everyone. I have gone as far as I can go by myself, and I am looking for a little help to see if together we can get this working.
I have a Lilliput 669GL-70NP/C/T 7" touch screen that I want to try and get working over USB host. So far, all my attempts have been fruitless, but I think that it is possible. The touchscreen utilizes an eGalax driver to work, and I see from their web site here:
http://home.eeti.com.tw/web20/eGalaxTouchDriver/linuxDriver.htm
that they have created a linux driver for ARM devices. Based on what I have been able to determine, this means that I should be able to load the driver on android, but this is where I start getting in way over my head.
Does anyone know what I should be trying to get this to work? I also read that ICS has some form of touch input built in... should I be trying this on that? Right now I am running CM7. It seems to me like with a little work we could have external touchscreens for our Atrix!
Oh I forgot to mention, when I plug the touchscreen in, DMSG does register a USB HID input device as "eGalax Inc. USB TouchController"
CM7 also registers the handlers for the touchscreen as mouse1 and event10 when I run "cat /proc/bus/input/devices"
It seems like this is so close right out of the box! I'm trying my best to load the drivers now from terminal... we'll see how that goes.
Hope you get it sorted.
xdraconis said:
CM7 also registers the handlers for the touchscreen as mouse1 and event10 when I run "cat /proc/bus/input/devices"
It seems like this is so close right out of the box! I'm trying my best to load the drivers now from terminal... we'll see how that goes.
Click to expand...
Click to collapse
Wow, I really wish that I could help. I'm really just dropping in to show interest and wish you good luck.
That would be a really sweet way to almost have a padphone. Ever since I unboxed my lapdock I've said that it should have been a tabdock with a touchscreen instead.
I'll go back to lurking now...
JdgM3NT4L said:
Wow, I really wish that I could help. I'm really just dropping in to show interest and wish you good luck.
That would be a really sweet way to almost have a padphone. Ever since I unboxed my lapdock I've said that it should have been a tabdock with a touchscreen instead.
I'll go back to lurking now...
Click to expand...
Click to collapse
Thanks, My idea here is to dump the phone to a mounted 7" screen in my car dash. I want to basically have a touch screen head unit with all the power android offers, and the unlimited data that AT&T is still reluctantly supplying.
As far as the project goes... I just tried on Joker's CM9 built with the exact same results... I was hoping maybe the rumors I had heard about ICS support were true, but not out of the box i suppose. As far as the drivers, I can not get the calibration / driver utility to run so far... and that's as far as I'm going to be able to go tonight.
Why not HDMI?
Edit, HDMI can't support touch screen, my bad
Sent from my MB860 using Tapatalk 2
Anthony04x said:
Why not HDMI?
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
lol nice timing. I was just logging in.
HDMI works great as is. However, I was looking to be able to provide input back to the phone. Otherwise, the phone still has to be front and center for controlling, which in my opinion kind of defeats the purpose of putting the screen there in the first place.
Basically you want to do like, vnc and pocket cloud, where you control your computer via smartphone but you wanna control the phone instead via touchscreen panel, that sounds like a pain in the ass!
Sent from my MB860 using Tapatalk 2
Anthony04x said:
Basically you want to do like, vnc and pocket cloud, where you control your computer via smartphone but you wanna control the phone instead via touchscreen panel, that sounds like a pain in the ass!
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Yes that's exactly what I want to do. I tried running a vnc server on the phone, but even over USB it was far too laggy.
Yeah you would need to like over clock but even that is sketchy
Sent from my MB860 using Tapatalk 2
Anthony04x said:
Yeah you would need to like over clock but even that is sketchy
Sent from my MB860 using Tapatalk 2
Click to expand...
Click to collapse
Right now I'm trying to install ubuntu on the atrix.... with linux drivers for arm devices that might be a solution i can handle, but I'm not sure it would work with USG host. Don't know until you try though!
True that! Let me know how it goes, sounds like an excellent project
Sent from my MB860 using Tapatalk 2
Have you seen this setup?
Youtube:
http://www.youtube.com/watch?v=633Kn4XkmJA
Website:
http://www.customgadz.com/store/product.php?id_product=16
I'd love this setup for my car for sure!
Sent from my MB860 using xda premium
xdraconis said:
lol nice timing. I was just logging in.
HDMI works great as is. However, I was looking to be able to provide input back to the phone. Otherwise, the phone still has to be front and center for controlling, which in my opinion kind of defeats the purpose of putting the screen there in the first place.
Click to expand...
Click to collapse
Are you sure that the USB isn't just for passing touchscreen input back to a device? I mean, I know there are such things as USB monitors, but I don't think this is one of them, is what I'm saying -- I'm pretty sure you need to use both HDMI and USB for this to work.
Even if you could load the driver. Which you can. You still need to write some libs and script to get android on the screen. Good luck
Sent from my MB860 using xda premium
samcripp said:
Even if you could load the driver. Which you can. You still need to write some libs and script to get android on the screen. Good luck
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
smokesignals said:
Are you sure that the USB isn't just for passing touchscreen input back to a device? I mean, I know there are such things as USB monitors, but I don't think this is one of them, is what I'm saying -- I'm pretty sure you need to use both HDMI and USB for this to work.
Click to expand...
Click to collapse
Perhaps I need to clarify... The Lilliput 669 has a proprietary HDMI cable that breaks into HDMI and USB. I am not trying to send video and input over USB, just input. The HDMI part works as is. I plan on using both HDMI and USB in the final solution.
jaketc said:
Have you seen this setup?
Youtube:
http://www.youtube.com/watch?v=633Kn4XkmJA
Website:
http://www.customgadz.com/store/product.php?id_product=16
I'd love this setup for my car for sure!
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Yea me too! I have tried in vain to buy this. $189 AU is a little less than $200, which I would be perfectly ok with for a completely working bluetooth solution. However, I can't buy it. MP3car.com is working with the designer to bring the product to market, but they are still 4-8 weeks out, and there are some concerns that it may not be released at all. The designer's web site lists the product as out of stock.
I have tried to find somewhere else that I could buy it, or at least get schematics to build one, but it has been in vain. By the way, this has been re-branded as "Mimics for Android".
I had been wanting to do the same thing. The other day i just came across something that should be coming out end of the month android quadcore mini development board. so you could say use touch monitor and android OS i see they have bluetooth also so maybe phone could connect bluetooth to the android system in car. there isnt much more info on the board but it looks promising for an incar project its tiny. its called odroid-x http://www.hardkernel.com/renewal_2011/products/prdt_info.php
there was some other $100 range android cube thing i saw recently too that might be good. OUYA is name of it maybe XDA will have a section one day for these devices. could make for some good in-car systems much cheaper than indash receivers and more features.
Good luck to ya, keep us posted. I would kill for a solution like this. I would love to be able to implement this, with a fiber optic audio out to a DSP like the Zapco DSP6 or Audison BitOne.1 or the Helix C/P-DSP that is coming to market.
dp28688 said:
I had been wanting to do the same thing. The other day i just came across something that should be coming out end of the month android quadcore mini development board. so you could say use touch monitor and android OS i see they have bluetooth also so maybe phone could connect bluetooth to the android system in car. there isnt much more info on the board but it looks promising for an incar project its tiny. its called odroid-x http://www.hardkernel.com/renewal_2011/products/prdt_info.php
there was some other $100 range android cube thing i saw recently too that might be good. OUYA is name of it maybe XDA will have a section one day for these devices. could make for some good in-car systems much cheaper than indash receivers and more features.
Click to expand...
Click to collapse
This all sounds good, and I have seen the OUYA... it looks impressive. However this will remove the phone ability if I go this route. I could just check out the android x86 project for that... I believe they already have this screen working actually. I've been trying to follow how they made that work.
I really want to stick with my atrix as the brain so that I retain the 3g connection without another $50 a month or losing unlimited internet.
Sent from my MB860 using xda app-developers app
just to know... do you read the "Kernel 2.6.24 upward" right?
theres also what samcriip told, even porting the drivers, you need to write the libs and scripts to get android on the screen, idk how much you know about android but... this is kinda hard to be done...
Good luck, you'll need it.
Really hope someone can help me with this problem I'm having. When I connect my Photon to a lapdock I don't get the option to use Webtop. The only options I get are Music, Gallery, and Mirror Screen. If I don't pick an option then all I see on the lapdock's screen is the red bouncing Motorola logo. When I choose either of those 3 options it displays on the lapdocks screen but I have no control of it via the touchpad or the keyboard. I have tried two different lapdocks, an Atrix that I modded myself and just now a Bionic, and both behave the same way.
As far as I know my phone isn't rooted or modded in any way. Only reason I'm not sure is because I bought my phone used close to a month ago. I have done a factory reset and wipe cache several times since I've owned it hoping that might help but so far it hasn't. Currently I am running Android 2.3.5, System Version 45.4.13.MB855.Sprint.en.US, and Webtop WT-1.2.0-180. Thanks in advance!
The HDMI or USB pins aren't connected all the way in. Reboot and try again. That's the most common reason it shows, unless you broke web top in some way
Sent from my MB855 using xda premium
hoslayer13 said:
The HDMI or USB pins aren't connected all the way in. Reboot and try again. That's the most common reason it shows, unless you broke web top in some way
Click to expand...
Click to collapse
I've rebooted countless times to no avail. When I connect the phone to the lapdock the phone charges so I assume that should mean the USB connection is fine and I get the Motorola logo on the lapdock screen so that should mean the HDMI connection is okay I guess. Ater a few seconds though the Motorola logo then starts to bounce around and that's all it does. I can choose Music, Gallery, and Mirror Screen on my phone and those show up just fine on the lapdock's screen. I have yet to use Webtop so I don't have anything to compare this to.
I have factory reset my phone a couple times hoping that would fix this but it hasn't. I'm assuming doing a factory reset would also reset Webtop and remove/modify any changes that have been made right?
bloodpool said:
I've rebooted countless times to no avail. When I connect the phone to the lapdock the phone charges so I assume that should mean the USB connection is fine and I get the Motorola logo on the lapdock screen so that should mean the HDMI connection is okay I guess. Ater a few seconds though the Motorola logo then starts to bounce around and that's all it does. I can choose Music, Gallery, and Mirror Screen on my phone and those show up just fine on the lapdock's screen. I have yet to use Webtop so I don't have anything to compare this to.
I have factory reset my phone a couple times hoping that would fix this but it hasn't. I'm assuming doing a factory reset would also reset Webtop and remove/modify any changes that have been made right?
Click to expand...
Click to collapse
I have mixed results with Webtop. Sometimes it works upon connecting the phone and sometimes it doesn't. I called Motorola support. They told me to take out the battery reinstall and then connect. This seems to work but not all the time.
HWestern said:
I have mixed results with Webtop. Sometimes it works upon connecting the phone and sometimes it doesn't. I called Motorola support. They told me to take out the battery reinstall and then connect. This seems to work but not all the time.
Click to expand...
Click to collapse
Thanks for the suggestion but that didn't seem to do it. I remember trying that when I originally noticed the problem. Did that a few times before considering I should factory reset the phone. I just did it again but this time I did it like 5 times in a row and kept getting the same results everytime. The HDMI connection window pops up on the phone and the only options I have to choose from are Gallery, Music, and Mirror phone on display. :crying:
Just got done taking the dock area of the lapdock apart so the loose cables were out of the cradle part. Did that to test to make sure the usb and hdmi connectors were making a solid connection with the phone in case the dock was getting in the way. Same result. The hdmi connection window pops up with only 3 non-webtop options available like earlier.
Well at least you ruled out the HDMI cable as not faulty. The issue must be the USB cable. You stated that you had no control of the touchpad and keyboard. Does the Photon show that its charging?
Sent from my MB855 using xda premium
hoslayer13 said:
Well at least you ruled out the HDMI cable as not faulty. The issue must be the USB cable. You stated that you had no control of the touchpad and keyboard. Does the Photon show that its charging?
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
Yeah the phone charges just fine when docked. Wish I could get this figured out. Webtop seems like a cool feature that I would use quite a lot if I could only get the phone and lapdock to play nice together.
bloodpool said:
Yeah the phone charges just fine when docked. Wish I could get this figured out. Webtop seems like a cool feature that I would use quite a lot if I could only get the phone and lapdock to play nice together.
Click to expand...
Click to collapse
:good:
sunilj75 said:
:good:
Click to expand...
Click to collapse
:good: to you too Not sure what that is about though. I haven't fixed anything or got anything to work.
It might be weptop itself. I can't think of any reason why it wont work other than that it just denies connecting to the lapdocks. You might need to try unlocking and flashing a different webtop. Seeing as you are on 2.3.5 it might be possible if you didn't take ota to get to 2.3.5. If you did, you may just need a newer lapdock like the lapdock 100. You pretty much ruled out hardware so software is the issue
Sent from my MB855 using xda premium
---------- Post added at 03:55 AM ---------- Previous post was at 03:52 AM ----------
Try scouring Loki's thread about ubuntop. He, or someone else(?), may have mentioned something about newer webtop refusing connection. It maybe something as simple as replacing an apk if you decide to root
Sent from my MB855 using xda premium
hoslayer13 said:
It might be weptop itself. I can't think of any reason why it wont work other than that it just denies connecting to the lapdocks. You might need to try unlocking and flashing a different webtop. Seeing as you are on 2.3.5 it might be possible if you didn't take ota to get to 2.3.5. If you did, you may just need a newer lapdock like the lapdock 100. You pretty much ruled out hardware so software is the issue
Sent from my MB855 using xda premium
---------- Post added at 03:55 AM ---------- Previous post was at 03:52 AM ----------
Try scouring Loki's thread about ubuntop. He, or someone else(?), may have mentioned something about newer webtop refusing connection. It maybe something as simple as replacing an apk if you decide to root
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
When I bought it it already had 2.3.5 so I'm going to guess the update was the OTA. As much as I would like to test out the lapdock 100 I don't think I'm going to do it. No place around me has one out on display for me to use and I'm definitely not going to buy it blindly since that would make the 3rd lapdock I've bought so far lol
Dang it. Guess I'll just admit I've been beaten by this and move on. Thanks for the help! I really do appreciate it.
I'm having the same issues. atrix lapdock, 2.3.5 ota update. i get unsupported device on my phone and those three options.
im trying to find a webtop update if possible.. phones rooted but not unlocked because of the freaking bs ota update that i THOUGHT was going to be ics when it showed up 2 days before qtr4
ronj75 said:
I'm having the same issues. atrix lapdock, 2.3.5 ota update. i get unsupported device on my phone and those three options.
im trying to find a webtop update if possible.. phones rooted but not unlocked because of the freaking bs ota update that i THOUGHT was going to be ics when it showed up 2 days before qtr4
Click to expand...
Click to collapse
I feel your pain, man. If you find anything out please share it. I would love to be able to use webtop on the lapdock I've had for about a month now.
Do you happen to have a mediadock? I'm curious if our phones would still show webtop if used with the mediadock. I don't have a 1 and I'm really not interested in buying one if that also won't work with my phone.
bloodpool said:
I feel your pain, man. If you find anything out please share it. I would love to be able to use webtop on the lapdock I've had for about a month now.
Do you happen to have a mediadock? I'm curious if our phones would still show webtop if used with the mediadock. I don't have a 1 and I'm really not interested in buying one if that also won't work with my phone.
Click to expand...
Click to collapse
If by "mediadock" you mean the HD dock, yes... well, the Electrify does Webtop on the HD dock. My wife's does (stock, unrooted). Mine only mirrors, but I'm running CM10 and that not doing webtop is a known issue. Webtop sucks anyway (IMO), I'd rather have CM10. But to answer your question, yes webtop works on the HD dock. You just need to bring your own keyboard, mouse, and screen.
Dark Reality said:
If by "mediadock" you mean the HD dock, yes... well, the Electrify does Webtop on the HD dock. My wife's does (stock, unrooted). Mine only mirrors, but I'm running CM10 and that not doing webtop is a known issue. Webtop sucks anyway (IMO), I'd rather have CM10. But to answer your question, yes webtop works on the HD dock. You just need to bring your own keyboard, mouse, and screen.
Click to expand...
Click to collapse
I know webtop works with the hd dock but I was asking ron if he had one to see if it would work with his phone since our phones are having the same issue.
I know a lot of people don't have positive feelings about webtop but that isn't my concern. I would like to get it working so I can at least try it. It is a feature this phone is supposed to have yet I haven't even see it on the lapdock I bought just for it.
Hi guys,
I just bought Motorola Razr XT910 GSM and i was looking for simple guide on rooting/installing custom ROMs but with no success.
Infos about my phone are:
System version:
672.180.41.XT910.NonEFIGSRetail.en.EU
Baseband version:
U_04.10.00R
Build number:
6.7.2-180_SPU-19-TA-11.6
I was wondering what is the simplest way (step by step guide would be nice) to install leaked OTA 4.1.2 ?
Is that version stable with GSM patch?
Currently i have clean stock ICS 4.0.4 on it. No root no nothing.
Just to mention i'm linux user, if there is a way to root and install 4.1.2 from linux that would be good if not i'll find some windows machine to do that!
Thanks
Nedzadk said:
Hi guys,
I just bought Motorola Razr XT910 GSM and i was looking for simple guide on rooting/installing custom ROMs but with no success.
Infos about my phone are:
System version:
672.180.41.XT910.NonEFIGSRetail.en.EU
Baseband version:
U_04.10.00R
Build number:
6.7.2-180_SPU-19-TA-11.6
I was wondering what is the simplest way (step by step guide would be nice) to install leaked OTA 4.1.2 ?
Is that version stable with GSM patch?
Currently i have clean stock ICS 4.0.4 on it. No root no nothing.
Just to mention i'm linux user, if there is a way to root and install 4.1.2 from linux that would be good if not i'll find some windows machine to do that!
Thanks
Click to expand...
Click to collapse
Hi
For root:
http://forum.xda-developers.com/showthread.php?t=1710871
For custom recovery:
http://forum.xda-developers.com/showthread.php?t=1792955 - with mention that BMM is at version 0.3.2 now
http://forum.xda-developers.com/showthread.php?t=1391900
For installing JB
http://forum.xda-developers.com/showthread.php?t=2078021
Also, there are some great ICS Roms overhere, therefore you can try them.
Welcome and happy flashing!
heblu said:
Hi
For root:
http://forum.xda-developers.com/showthread.php?t=1710871
For custom recovery:
http://forum.xda-developers.com/showthread.php?t=1792955 - with mention that BMM is at version 0.3.2 now
http://forum.xda-developers.com/showthread.php?t=1391900
For installing JB
http://forum.xda-developers.com/showthread.php?t=2078021
Also, there are some great ICS Roms overhere, therefore you can try them.
Welcome and happy flashing!
Click to expand...
Click to collapse
Thank you !
Nedzadk said:
Thank you !
Click to expand...
Click to collapse
Welcome.
Forgot smt: With BMM you can also flash kernels and basebands and you can find it at play store.
I recommend Chinese baseband for EU devices. Better radio and battery life
Wierd
Is anyone else facing this problem , has plagued me since my 2.3.6 days. And since your phone is new, thought I'd ask.
The screen picks up all sorts of mis-correct inputs when pugged into the AC mains, especially noticeable when texting in any app. This happends to a lesser extent when using the USB port. Had this phone for 6 months now. Am using the OG charger of course. Strange one may think but is this a general widespread problem ? This is the only problem holding me back from rooting and getting the JB ball rolling. BTW, had 2 razr's so I have two AC adaptors. Tried both.
If this is a digitizer problem as someone did indicate once somewhere, I'm regret ever having bought this phone. Have had to refrain from using it while charging. And if so, am going to push for a different device. Didn't buy a dysfunctional phone, for sure
Service Center means a LOT of downtime and I cannot even backup app data as I haven't root. Can anyone help me here?
Thanks !
PS :
Here's claims to back me up. If so, has anyone successfully replaced their product ? I wouldn't mind an HD given that I did pay full RRP.
for no reason my Razr will suddenly start going crazy. Random buttons will be pressed on the screen like someone is trying to hack into it (but I know they are not). Because of the random key presses, apps will open and close super fast. The only way to stop it is to power down and power it back up. Which after I do that, it's fine
Click to expand...
Click to collapse
and another
Researched the issue months ago and learned there seems to be an issue with the digitizer (that's the piece of glass and components that identify your swipes). I thought it was only with certain earlier versions of the Droid, so am disappointed to hear you're having trouble with the Razr. Some folks have reported sending it back to Motorola, and $200 later, it's fixed. While early sufferers were Motorola users, I just read a post where someone is having the same issue with an HTC Eris...
I suggest returning your phone for a new one
Click to expand...
Click to collapse
Well, I bought my phone in the month of May '12
0razor1 said:
Is anyone else facing this problem , has plagued me since my 2.3.6 days. And since your phone is new, thought I'd ask.
The screen picks up all sorts of mis-correct inputs when pugged into the AC mains, especially noticeable when texting in any app. This happends to a lesser extent when using the USB port. Had this phone for 6 months now. Am using the OG charger of course. Strange one may think but is this a general widespread problem ? This is the only problem holding me back from rooting and getting the JB ball rolling. BTW, had 2 razr's so I have two AC adaptors. Tried both.
If this is a digitizer problem as someone did indicate once somewhere, I'm regret ever having bought this phone. Have had to refrain from using it while charging. And if so, am going to push for a different device. Didn't buy a dysfunctional phone, for sure
Service Center means a LOT of downtime and I cannot even backup app data as I haven't root. Can anyone help me here?
Thanks !
PS :
Here's claims to back me up. If so, has anyone successfully replaced their product ? I wouldn't mind an HD given that I did pay full RRP.
and another
Well, I bought my phone in the month of May '12
Click to expand...
Click to collapse
I had same issue when i plug it in wall cord, i cant click on anything precise, its the charger, i use one that came with my nexus 7 and have no trouble using phone while charging. I didnt test it on USB port, but im sure its charger problem. Try another charger!
I havent bought my phone new, its used one but in perfect condition!
Also i should have mention that i had same problem with Galaxy I7500 (first samsung galaxy device, not the tablet its phone) couple years ago and also with Galaxy S3 (my brothers phone). Same problems occured when using some chargers. Try swaping chareges until you find one that fits
Maybe i'm wrong but thats what helped me.
Nedzadk said:
I had same issue when i plug it in wall cord, i cant click on anything precise, its the charger, i use one that came with my nexus 7 and have no trouble using phone while charging. I didnt test it on USB port, but im sure its charger problem. Try another charger!
I havent bought my phone new, its used one but in perfect condition!
Also i should have mention that i had same problem with Galaxy I7500 (first samsung galaxy device, not the tablet its phone) couple years ago and also with Galaxy S3 (my brothers phone). Same problems occured when using some chargers. Try swaping chareges until you find one that fits
Maybe i'm wrong but thats what helped me.
Click to expand...
Click to collapse
Same with me. Ditched the moto charger and I use a Blackberry charger. Never had a repeat of the issue again, and it used to happen a lot on the Motorola charger.
What is "BP TOOLS" and where can i find that ??
<EDIT> Got it, never mind </EDIT>
heblu said:
Hi
For root:
http://forum.xda-developers.com/showthread.php?t=1710871
For custom recovery:
http://forum.xda-developers.com/showthread.php?t=1792955 - with mention that BMM is at version 0.3.2 now
http://forum.xda-developers.com/showthread.php?t=1391900
For installing JB
http://forum.xda-developers.com/showthread.php?t=2078021
Also, there are some great ICS Roms overhere, therefore you can try them.
Welcome and happy flashing!
Click to expand...
Click to collapse
the root didnt work. i tried the software numerous times followed each instruction but the root didnt work. any other way or reason why it wouldnt root ?
naifs_br10 said:
the root didnt work. i tried the software numerous times followed each instruction but the root didnt work. any other way or reason why it wouldnt root ?
Click to expand...
Click to collapse
What OS are u using? Did u follow the instructions from OP?
I have rooted my device many times and never had any issue. I'm a windows user (7 and 8)
Please give me more details
heblu said:
What OS are u using? Did u follow the instructions from OP?
I have rooted my device many times and never had any issue. I'm a windows user (7 and 8)
Please give me more details
Click to expand...
Click to collapse
yup all instructions i am on ics 4.04 running the fido carrier canada xt910 and on windows 7
just says rooting but doesnt do anything for me
naifs_br10 said:
yup all instructions i am on ics 4.04 running the fido carrier canada xt910 and on windows 7
just says rooting but doesnt do anything for me
Click to expand...
Click to collapse
maybe disable firewall/antivirus. who knows?
heblu said:
maybe disable firewall/antivirus. who knows?
Click to expand...
Click to collapse
no use tried alot of different methods
0razor1 said:
The screen picks up all sorts of mis-correct inputs when pugged into the AC mains, especially noticeable when texting in any app. This happends to a lesser extent when using the USB port. Had this phone for 6 months now. Am using the OG charger of course. Strange one may think but is this a general widespread problem ? This is the only problem holding me back from rooting and getting the JB ball rolling. BTW, had 2 razr's so I have two AC adaptors. Tried both.
If this is a digitizer problem as someone did indicate once somewhere, I'm regret ever having bought this phone. Have had to refrain from using it while charging. And if so, am going to push for a different device. Didn't buy a dysfunctional phone, for sure
Click to expand...
Click to collapse
Could it be a grounds issue?
FlipMorten said:
Could it be a grounds issue?
Click to expand...
Click to collapse
I hope not. Don't see why a 5.2V device needs grounding. And if anything .. the screen is glass.. It's capacitive in nature to a small extent. Built up charge should not do what it does. The USB off my MSI mobo and ASUS is filtered and grounded.. Even they do this to an admittedly lower frequency.
The Moto charger puts out a healthy 1A if I'm not mistaken. Not trading that in for some POS BB charger- It's 800mAh the one lying around at a lower 5V rating. That's going to mess things up in the long run-- higher voltage and amperage charging is faster and gets to the full capacity of the battery- the voltage has a say when it comes to lithium batteries.
Anyone here get a replacement from Moto if they had the same issue? Does you think its worth a try?
Thanks for the replies:good:
I had a Milestone (a GSM variant of the Droid) and it had the very same issue. However, it had a metal frame - upon touching it the issue was instantly alleviated.
Sent using a touch screen
Napisane na ekranie dotykowym
So this works out to an inherent flaw with this screen? I had a SAMOLED on my OG Wave and it never messed up {ever} must have been the metal body. Nevertheless, The razr is FUBAR when charging. Had an S2 for a while, never cropped up despite having a similar screen panel. Think I should just file a complaint and get the ball rolling here? Though service (Moto) is terrible in my country, and I don't think they've even launched the Razr HD here. I'd rather pick it over the S3.
WIshful thinking!
I have tried 4-5 diferent roms and in all roms i am getting my music apps(audio+video stock and third party apps, call ringtones) are getting strugle in running with both speaker and headphone mod. Not getting fc anytime. Sometime all related apps runs smoothly and sometime all face struggle zigzag type video/audio. Any help Please.
Is flashing stock firmware help? OR it is purly a hardware related issue.
Will flashing Stock firmware via odin unroot my phone?
Dont have a clue about that, did you try another music player like google mudic?
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Dont have a clue about that, did you try another music player like google mudic?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Till now not tried Google music. Should I try that?
Right now I am with MIUI 3.9.27 rom. I have three video players (miui +samsung +mxplayer) audia player (stock +poweramp). Everywhere same issue. Already tried ROMS( Xtreme(AOKP BASE); teamxd v4, v5(Stock Based); MIUI v5 2.9.6 and now 2.9.27).
Try it you dont have anything to lose. And the mod is from http://forum.xda-developers.com/showthread.php?t=2302748 site right?
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Try it you dont have anything to lose. And the mod is from http://forum.xda-developers.com/showthread.php?t=2302748 site right?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Actually extra volume boost link given by you is for sony or aosp roms and for increse in volume. I have different issue. My audio/video are not running smoothly even ringtone when anyone calls me. So i would not like to try that. I have tried Google play music app. and actually right now all related apps are working fine so that also works fine. I will reply about Google music app when I get the issue again.
Okay. You said something about a sound mod so I looked for it.
Sent from my GT-I9100 using xda app-developers app
kona144 said:
Okay. You said something about a sound mod so I looked for it.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
yes. and same issue comes in all roms so i think it may be some hardware related issue Or some error which is not getting solved after rom changing also. As you suggested to someone in other thread "strong bootloop" to use script "to remove parts of the phone that may be can make some isues with the ROM that you are flashing" , Can i use that type of thing. If so please provide a link for i9100g.
Actually problem starts as:
I was with teamxd rom(samsung based). My memory get filled and i could not delete any file by file manager(ES). I made a factory reset and device got bootloop. Then I install the same Rom again with full wipe. After that i am with this problem in all roms.
siwach said:
Actually problem starts as:
I was with teamxd rom(samsung based). My memory get filled and i could not delete any file by file manager(ES). I made a factory reset and device got bootloop. Then I install the same Rom again with full wipe. After that i am with this problem in all roms.
Click to expand...
Click to collapse
I actually dont know what is wrong maybe is what you say error or a bug. And the i9100g I think that it uses almost exact hardware thing that i9100 has the only difference is the nfc.
Sent from my GT-I9100 using xda app-developers app
kona144 said:
I actually dont know what is wrong maybe is what you say error or a bug. And the i9100g I think that it uses almost exact hardware thing that i9100 has the only difference is the nfc.
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Ok i have applied stock firmware via odin. It unroot my phone. It seems the audio/video struggle issue get solve. Let i try some different type of video/audio formats and reply tomorrow.
not solved after stock firmware
siwach said:
Ok i have applied stock firmware via odin. It unroot my phone. It seems the audio/video struggle issue get solve. Let i try some different type of video/audio formats and reply tomorrow.
Click to expand...
Click to collapse
Still I have same problem after stock firmware via odin. All audio/video apps not running smoothly half of the time.
siwach said:
Still I have same problem after stock firmware via odin. All audio/video apps not running smoothly half of the time.
Click to expand...
Click to collapse
I found the main reason why audio/video is not running smoothly. I cleaned usb prot and now when I am applying charger there is no issue as soon as i remove the usb cable running audio/video apps getting struggle.
siwach said:
I found the main reason why audio/video is not running smoothly. I cleaned usb prot and now when I am applying charger there is no issue as soon as i remove the usb cable running audio/video apps getting struggle.
Click to expand...
Click to collapse
You might need to change the USB flex board then. Cheap & easy. Click the link in my signature, from there you can access a guide by @keithross39, where it's explained how to DIY if you choose. Pay careful attention though, there's 4 different versions (revisions) of the board itself, you need the correct one or you'll get issues. Else, just take it to a service centre/local shop to get it replaced.
Hopper8 said:
You might need to change the USB flex board then. Cheap & easy. Click the link in my signature, from there you can access a guide by @keithross39, where it's explained how to DIY if you choose. Pay careful attention though, there's 4 different versions (revisions) of the board itself, you need the correct one or you'll get issues. Else, just take it to a service centre/local shop to get it replaced.
Click to expand...
Click to collapse
I have taken it to local shop and he is saying it is not usb problem. Your phone not taking so much load to play audio/video. After applying charger it get more power and then it works fine. He take my phone for one day. I suggest him please change usb port first. If that not works then try to find solution according to you.
Where I can get USB flex board in india(anyone please help). I tried to find on ebay but not succeed. There is someone whose motherboard is dead. Remaining everything is working. But his phone is I9100 and mine is I9100g. Are the remaing hardwares are same in both. Will his USB board works in mine
siwach said:
I have taken it to local shop and he is saying it is not usb problem. Your phone not taking so much load to play audio/video. After applying charger it get more power and then it works fine. He take my phone for one day. I suggest him please change usb port first. If that not works then try to find solution according to you.
Where I can get USB flex board in india(anyone please help). I tried to find on ebay but not succeed. There is someone whose motherboard is dead. Remaining everything is working. But his phone is I9100 and mine is I9100g. Are the remaing hardwares are same in both. Will his USB board works in mine
Click to expand...
Click to collapse
I would ordinarily say it isn't either. I don't know if it's not that. Regardless, it sounds like you need a new one anyway. Let us know how you go with the repair shop.
As far as I know, the i9100g one will not be compatible with the i9100, as the hardware is different. I don't know how to buy one for an i9100g, I would have said ebay but other than that, I'm not too sure. Sorry to not be of much help.
Hopper8 said:
I would ordinarily say it isn't either. I don't know if it's not that. Regardless, it sounds like you need a new one anyway. Let us know how you go with the repair shop.
As far as I know, the i9100g one will not be compatible with the i9100, as the hardware is different. I don't know how to buy one for an i9100g, I would have said ebay but other than that, I'm not too sure. Sorry to not be of much help.
Click to expand...
Click to collapse
Thanks a lot for this kind conversation.
siwach said:
Thanks a lot for this kind conversation.
Click to expand...
Click to collapse
No problem mate. Let us know if you have any success
Sent from a galaxy far, far away