OK heres the issue I used the htc unlock method and htc dumlock and things were fine for months to make a long story short I forgot what recovery I was using and couldn't nandroid so I went to the market and got rom manager out of habit then the next day my phone flipped out and basically bricked I realized I needed TWRP so know I have that but roms will not load they either freeze or just lead to a boot loop and when I try to re-flash the recovery using the HTCdumlock option so it has the recovery on both for the workaround it will just continue to run and never end. Also when I try to nandroid restore now it will say completed in 0 seconds
I am now without a phone and everything altogether I have been here for a while and know if anyone can help me its u guys and gals.
Thanks
Just get a recovery and flash using fastboot flash recovery recoveryname.img for recoveryname is what ever recovery u wanna flash and also get the boot.img from a ROM and flash using fastboot flash boot boot.img and then reboot recovery and and flash ROM and it will be fine...the best recovery is 4EXT recovery smartflash s-on witch u can flash roms regular using the recovery hope it helps
Sent from my PG86100 using xda premium
Thanks I actualy used fastboot and flashed back to the old twrp recovery and was able to run my nan backups but they run and the phone just goes back to boot looping i have tried everything i can think and its just back and forth from recovery to boot looping for 2 days streaight now. I'll try the recovery you mentioned though thanks I'll let you know if it works but at this point Im starting to think that I somehoe removed my boot partition and im flashing to nothing
I finaly solved this issue and I want to share for those who may have it.
My main problem was that I had an unlocked bootloader I could not use an RUU without an error and everything I did no matter what let to bootloop.
I simply had to relock my bootloader (To re-lock your bootloader, in the command prompt, type: fastboot oem lock.) Then run the RUU. Aparently RUU's will not work on an unlocked bootloader and now after 2 days finaaly everything is all back to normal.
adambomb_13 said:
I finaly solved this issue and I want to share for those who may have it.
My main problem was that I had an unlocked bootloader I could not use an RUU without an error and everything I did no matter what let to bootloop.
I simply had to relock my bootloader (To re-lock your bootloader, in the command prompt, type: fastboot oem lock.) Then run the RUU. Aparently RUU's will not work on an unlocked bootloader and now after 2 days finaaly everything is all back to normal.
Click to expand...
Click to collapse
You really should try the brick downgrade method no more hassles with fast boot crap. Love my phone now
from my downgraded 3EVO
adambomb_13 said:
I finaly solved this issue and I want to share for those who may have it.
My main problem was that I had an unlocked bootloader I could not use an RUU without an error and everything I did no matter what let to bootloop.
I simply had to relock my bootloader (To re-lock your bootloader, in the command prompt, type: fastboot oem lock.) Then run the RUU. Aparently RUU's will not work on an unlocked bootloader and now after 2 days finaaly everything is all back to normal.
Click to expand...
Click to collapse
You always have to relock before using a RUU otherwise you will get a error ..
Like the other user said
You can
fastboot flash recovery recovery.img and your set Also works to flash a rom and kernel together if your hboot 1.5
Fastboot boot recovery.img wipe and flash.
And twrp has issue's your better off using 4ext for your custom recovery I'm willing to bet thats the cause of the problem
Sent from my HTC EVO 3D X515m using xda premium
Related
hi all
Forgot to charge my EVO 3D (CDMA) and battery completely drained. Even after using another fully charged battery my phone goes to bootloop - just shows the HTC logo and reboots again and again. Here is what I have:
hboot : 1.5 (S-ON)
radio : 1.06.00.1216
ota : 2_17.651_5
(I am using this phone in India activated on Reliance)
As the phone doesn't boot I can't access it thru adb to give command 'adb reboot bootloader'
I can get bootloader by pressing vol_down+power
When I run the 2_17.651_5 RUU (exe) from my computer while phone is on fastboot, it completes successfully without errors. But still on reboot it just stays at the htc screen and reboots (guess it's becoz stock kernel not getting flashed as the phone is s-on)
kindly help to get back my phone boot again
thanks and regards
ananth
R.I.P
Sent from my HTC.EVO.3D.Xda Premium
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
jdeoxys said:
Don't listen to the previous guy. Try using fastboot OEM lock and then ruuing. Or, try getting freezas stock kernel and extracting the boot.IMG and flashing it thru fastboot. Or, you could use fastboot flash recover recovery.IMG to get twrp or clockworkmod and do a superwipe and try flashing a new Rom. There are tons of options if you still have fastboot.
Sent from my HTC popout book.
Click to expand...
Click to collapse
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
ananth001 said:
Thanx for responding. As I mentioned earlier,I have already relocked and RUU'd the exe file,but though it runs without errors doesn't solve problem. Again as it is s-on doesn't permit to flash boot.img. Though I am able to flash twrp recovery, not able to get into recovery from fastboot. Thanks again, really appreciate your help.
Click to expand...
Click to collapse
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Sent from my PG86100 using Tapatalk
megabiteg said:
You don't need to relock once you unlock the HTC way. Just unlock the phone then flash via fastboot the boot.img and then ruu if you want.
Click to expand...
Click to collapse
thanks. extracted boot.img from freeza's kernel and flashed from fastboot after unlocking. But still doesnt solve problem. Can you give me a link for boot.img
Pleassssssse HELP !!!!!!
I have the exactly the same problem, a full reboot result in boot loop, and can not fix it by now.
I guest the phone is rooted before OTA, so OTA can not flash kernel successfully because the wrong signature, and the phone will not boot because the wrong kernel.
I have tried ruu, fastboot boot recovery.img and etc, all failed.
The key point is that, the phone is rooted and you tried OTA. HTC OTA must have a stupid bug, it can not recovery from a partial update, or automatically roll back becasuse of the partial update, dem!
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Please have a look at the guide/flashing notes in my signature. If u r unlocked u are likely not entering recovery correctly.
If u are trying to flash the Ruu u have to be locked or relocked. If u cant boot to android, run the xhausx's full Ruu zip from bootloader.
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
ananth001 said:
1) flashed RUU (exe) after relocking - flash completed without errors
2) ran xhausx's full RUU zip (PG86IMG_2.17.651.5.zip) from bootloader (could get into bootloader by pressing volum_up + power button. adb cannot connect to phone (as phone does not boot), to run 'adb rebooot bootloader')
But still doesn't solve problem and phone keeps rebooting, apparently kernel has not flashed properly.
Please help !!!1
Click to expand...
Click to collapse
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
I wonder the same thing all I saw was 1.5
Sent from my PG86100 using xda premium
mpgrimm2 said:
Just noticed u said India & carrier is reliance. Why would u be using a Sprint USA CDMA Ruu? Shouldn't u be using a GSM RUU version?
Sent from my PG86100 using Tapatalk
Click to expand...
Click to collapse
Reliance has both CDMA as well as GSM service in India. Mine is a Reliance CDMA MDN.
thanks and regards
reaper24 said:
You need to use the RUU 2.17 exe after you relock your phone... Then flash a copy of CWM or TWRP on it..
Then adb
fastboot boot recovery.img
Wipe and flash whatever you want
Click to expand...
Click to collapse
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
ananth001 said:
Yeah , as I mentioned earlier, I also tried using the RUU 2.17 exe after relocking (RUU completed successfully without errors) , and flashed twrp recovery from fastboot . But still it's a no go.
(Again would like to repeat that I can't boot into bootloader from adb - adb cannot connect as phone doesn't android boot. I get into fastboot by pressing vol_down + power)
thanks all for your responses and help, hope you all will continue guiding me till I get this done.
Click to expand...
Click to collapse
Have you tried to just run the RUU like you said boot turn debug on .... Then go to hboot flash your recovery...
Then fastboot boot recovery.img.
This should work I have unrooted my phone 3 times already in the past month Trial and Error on my part adb always found my phone...
I am tryin to figure out what is going wrong on the last part with TWRP...
Since you said after you do that it was a no go? What happend ? Adb should still be working since you just flashed the recovery...
Anyways I hope you get it solved man I am tryin to figure this problem out.
Do you have a rom already ready to be flashed on your SD card?
Problem is, since i’m not able to android boot I can't reboot bootloader from adb, as I can't connect adb without the phone normal booting. When I boot it just stays at the HTC white screen.
I have flashed twrp recovery from fastboot, but when I give command 'fastboot boot <twrpxxxxx>.img it just boots back to the HTC splash screen
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Android Cowboy said:
You can go back to complete stock if you rename the RUU file PG86IMG.zip and load onto the root of sd card. Get into bootloader with [power+volume down] and it will automatically detect and load the zip file. This can only be done if you are relocked. I did this in order to get the latest update. After you get back to stock you can unlock and root again.
Click to expand...
Click to collapse
As I mentioned in earlier post, have tried flashing PG86IMG.zip from bootloader, but still phone doesn't boot properly and is in a bootloop.
You've used the following file and done these exact steps and allowed the phone to boot to full stock OS? (assuming 2.17.651.5 is correct version)
OPTION 2 - RUU.zip info:
I prefer the .exe version but xHausx’s “FULL” PG86IMG_2.17.651.5.zip may work for you (must be renamed PG86IMG.zip). Make sure you have plenty of battery/charge left!
- (XDA) Xhausx full PG86IMG.zip RUU images (651.5 zips)
PG86IMG_2.17.651.5.zip http://forum.xda-developers.com/showpost.php?p=21593454&postcount=564
MD5: 8F82C2D8F98C077AF775266064BACB5D
From Scrosler's zip Directions : http://forums.androidcentral.com/htc-evo-3d-rooting-roms-hacks/107641-how-return-100-stock-all-versions.html
Scrosler; said:
USE ONLY FOR EMERGENCY PURPOSES. THIS OVERWRITES EVERYTHING!!!!
**THIS WILL RETURN YOU TO FRESH OUT OF THE BOX**
You will not need any special drivers loaded, etc...
1.Download the stock ROM ZIP image from here: and rename it "PG86IMG.zip"
2.Copy it to SD Card
3.Reboot phone into hboot mode by holding volume down and then press power.
Keep volume down held until you boot into hboot mode.
4.In hboot mode the phone will scan the SD card with the image. Once it finds it will ask you if you want to update. Press "Power" to update.
5.Wait.... For a while. When it gets to "system" it will loop a few times. Its quite nerve wracking actually but after about 5 or 6 times it will complete.
6.Once the entire flash is complete it will prompt you to "press power to reboot." Press power and your phone will reboot to 100% stock ROM.
Click to expand...
Click to collapse
For people who came for an answer, here it is.
download android sdk
download fastboot drivers
get clockworkmod img and rename to imgfile.img
put img in adb tools
put adb, adbwinapi, fastboot, and the img file in c:/Android
plug your phone to the computer
enter the bootloader
click on recovery or fastboot doesnt matter since both will now take you to fastboot
goto computer
type in run in start menu
type cmd in run and hit enter
type cd c:\Android
type fastboot boot imgfile.img
you are now in recovery
go to mounts and storage and mount your device as a disk drive
download any rom to your computer doesnt really matter and put in on your sdcard. If you already have a rom on there then just use that.
unmount your phone
go to wipe data/factory reset and when it finishes flash the rom
once rom is done flashing reboot into android again.
your phone is partially fixed
now go to the market (if you flashed cm then flash the gapps.zip) and download "rom manager"
Then click on download clockworkmod 5.0.0.2 or something like that (first option)
Now go to rom manager and restore your backup that u made (If there was 1 before)
now it will be fixed and your bootloader will take u to recovery instead of fastboot when you click recovery xD
thanks xda
I flashed a rom and the rom must have been corrupted or something and now my phone is stuck rebooting and when I try to go to recovery or any option it takes me to fastboot so now my phone is basically bricked
Your phone is not bricked since your still able to turn it on.
Can you enter fasboot USB?
Send from my Evo 3D using Tapatalk
well it doesnt really turn on its a boot loop but whatever and fastboot is weird it doesnt want to work.
If your bootloader is unlocked make sure you flash the boot.img through fastboot and make sure you wipe
Sent from my ADR6425LVW using XDA
fastboot doesnt work I already tried too flash it
Guys please help!!!!!!!!!!!!!!!!!!
What do you mean by fastboot is wierd. Did you pull the battery?
fastboot doent work cmd always says waiting for device
if i click recovery it takes me to fastboot, btw.
Have you tried an ruu?
anobahar said:
fastboot doent work cmd always says waiting for device
Click to expand...
Click to collapse
Do you have the proper drivers installed
Sent from my ADR6425LVW using XDA
Are you S-Off or S-On? If S-Off, download a PG86IMG.zip of a recovery, and use your bootloader to flash recovery. From that point, just restore a backup or reflash a ROM. If you're not S-Off, I'd say you should try running an RUU, since you can't get fastboot to work. But I think you need to relock your device to run an RUU (if you're S on/ HTC Unlocked), so you'd still need fastboot. Do you have a different USB cable to try? I've seen them fail before even though they still work to charge.
k2buckley said:
Are you S-Off or S-On? If S-Off, download a PG86IMG.zip of a recovery, and use your bootloader to flash recovery. From that point, just restore a backup or reflash a ROM. If you're not S-Off, I'd say you should try running an RUU, since you can't get fastboot to work. But I think you need to relock your device to run an RUU (if you're S on/ HTC Unlocked), so you'd still need fastboot. Do you have a different USB cable to try? I've seen them fail before even though they still work to charge.
Click to expand...
Click to collapse
Sounds like the drivers arn't installed right.. Like you said if he is S-ON and relocked he can run a RUU exe if he is CDMA...
If you are s off then you just need to reload another recovery. And then access a backup of a rom! Or just flash a new one. I had a issue just like this yesterday where my recovery was broken for some reason and had to go from twrp. 2.1 back to 1.1.1 and load another rom.
Sent from my PG86100 using xda premium
Well i put the sdcard in a bberry but a pg6img.img in my sdcard but bootloader doesnt do anything
I am cdma, s-off unlocked with revolutionary kernel 1.4
oops not kernel hboot
Ok, fail, i dont think i hav fastboot drivers downloading now
now cmd is stuck on "sending recovery"
Did you place a copy of the img into your fast boot folder and one in your adb tools folder ???
#Root-Hack_Mod*Always\
First of all i've been searching for a way to fix this for hours now without a solution.
My problem is as follows:
i installed official miui beta and got stuck with a boot loop, i was running 4text recovery but i wanted to try something different so i flashed twrp recovery in fastboot. however whenever i try to go into recovery now it just reboots and goes into boot loop again, so i cannot access recovery or boot into my rom.
I have tried flashing several recoverys via fastboot but each time it just reboots and does not enter recovery.
i have also tried rebooting into recovery using fastboot reboot recovery and adb reboot recovery but still it didn't work.
i have flashed another boot.img but now it just gets stuck on miui screen instead of boot loop
is there any way i can get any recoverys to work? i have tried looking for a 4text recovery.img as 4text was the last recovery to work but i can only seem to find the app that flashes it.
i have also tried flashing a rom through fastboot by typing fasboot flash zip rom.zip but it just says failure.
i am now downloading RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_radio_11.77.3504.00U_11.25.3504. and am going to try rename it to PG86IMG and update through bootloader after relocking it and then unlocking it again but i am not sure that will work.
in short i flashed a new recovery but it just reboots device when i try and enter it and the rom i am on happens to be stuck on boot loop so i cannot get in rom or recovery and flashing a new recovery does not work.
BTW i am S-ON HBOOT-1.49.0018
sorry for the lengthy post and also any grammatical errors as i am tired
Comments withdrawn
zcink said:
The whole problem, which is always the problem is you are S-ON. The MIUI rom will NOT run unless you install the newest firmware. You cannot install the newest firmware with S-ON because it is locked up in a partition that you cannot access unless you go s-off.
Has nothing to do with the recovery. I've been using 4ext recovery pretty much the whole time I've owned my EVO 3d and never had one single problem with it.
There are roms you can run with s-on but not the MIUI one.
Click to expand...
Click to collapse
cool, didn't know that, my problem now then is how can i reflash a different rom, bearing in mind that i cannot access recovery? do you think putting the pg86img stock ruu thingy on my sd and letting bootloader install that will work?
powellyable said:
cool, didn't know that, my problem now then is how can i reflash a different rom, bearing in mind that i cannot access recovery? do you think putting the pg86img stock ruu thingy on my sd and letting bootloader install that will work?
Click to expand...
Click to collapse
I do believe that if you are s-on, you should be able to relock the phone and then run the rru from your computer.
sonza said:
I do believe that if you are s-on, you should be able to relock the phone and then run the rru from your computer.
Click to expand...
Click to collapse
My next step was to relock it and run the ruu through bootloader, can you do it through computer/fastboot?
Sorry, I haven't been on the forum for a while.
Read the following link,
http://forum.xda-developers.com/showthread.php?t=1194053&highlight=relock
It should help you with the process.
The rru file you have should be an executable file that the name ends with "signed.exe" if memory serves. I do believe you can run this from your windows desktop if you are using windows. The link above has the adb command to use to relock the phone.
Once you are up and running again, you can install an ics rom even if you have s-on. I am running one but there are a few steps you need to do in the correct order so you don't end up where you are.
Good luck and have a great weekend!
Here is another good link to do what you are wanting to do.
http://forum.xda-developers.com/showthread.php?t=1578977
This might be even easier for you.
Comments withdrawn
i cleared everything and i have 2 different roms on the sd but when i install one i get htc boot logo i can get into recovery and hboot which is 1.50 by the way so what do i do? i have no backup and im just confused?
Since you are s-on, you need to make sure you're flashing the kernel separately. Most people have good luck using 4ext with its Smart Flash option.
You have likely hosed up the boot partition/kernel preventing 4ext's Smartflash feature from working. If u enter your recovery via fastboot command prompt you should be able to flash normally and get the rom's kernel to load.
The HTC Unlock/hboot 1.5x Guide (my signature) should help.
Sent from my "Up all night, Sleep all day" EVO3D!
mpgrimm2 said:
You have likely hosed up the boot partition/kernel preventing 4ext's Smartflash feature from working. If u enter your recovery via fastboot command prompt you should be able to flash normally and get the rom's kernel to load.
The HTC Unlock/hboot 1.5x Guide (my signature) should help.
Sent from my "Up all night, Sleep all day" EVO3D!
Click to expand...
Click to collapse
what does that mean and how do i do that?
larikeal said:
what does that mean and how do i do that?
Click to expand...
Click to collapse
It means put your phone in "fastboot usb" mode and from the directory on your PC that contains adb and fastboot issue the following command:
fastboot boot recovery.img
The "recovery.img" parameter is the file name of whatever custom recovery you flashed to root.
After the phone boots up in recovery, just make sure SmartFlash (S-ON) is disabled in the tools menu if you are using 4EXT, then flash the ROM the same way you normally would. This method of starting recovery allows you to flash the boot partition (kernel) from recovery even though you are S-ON.
If you need more information than that, look at the links in the mpgrimm2's signature.
ramjet73
ramjet73 said:
It means put your phone in "fastboot usb" mode and from the directory on your PC that contains adb and fastboot issue the following command:
fastboot boot recovery.img
The "recovery.img" parameter is the file name of whatever custom recovery you flashed to root.
After the phone boots up in recovery, just make sure SmartFlash (S-ON) is disabled in the tools menu if you are using 4EXT, then flash the ROM the same way you normally would. This method of starting recovery allows you to flash the boot partition (kernel) from recovery even though you are S-ON.
If you need more information than that, look at the links in the mpgrimm2's signature.
ramjet73
Click to expand...
Click to collapse
guys same problem here hboot 1.53 S-on and im sure this is the rite rom for my model : RUU_SHOOTER_U_ICS_35_S_HTC_ARA_3.28.415.2_Radio_11.77.3504.00U_11.25.3504.06_M_release_264795_signed.exe
but i can complete the process upto 65% flash goes normal then suddenly shows up 100% process complete still stuck on bootloop and i can't able to find the rom anywhere and i donno whether there is problem with rom or phone.
phone status: ***relocked***, s-on, hboot 1.53 RL
any suggestion pls.................
mobileplazza said:
phone status: ***relocked***, s-on, hboot 1.53 RL
any suggestion pls.................
Click to expand...
Click to collapse
You can't flash with a relocked bootloader. Since the phone is S-ON you need to htcdev unlock the bootloader again after flashing the RUU, then install a custom recovery and you should be able to flash successfully or restore a previous nandroid backup.
ramjet73
It's not clear to me, but it almost sounds like MobilePLazza's problem is that he can't flash the full RUU to get back to stock and not sure if he even has the correct RUU.
Same outcome as the OP, but different problem. Perhaps he will clarify.
mpgrimm2 said:
It's not clear to me, but it almost sounds like MobilePLazza's problem is that he can't flash the full RUU to get back to stock and not sure if he even has the correct RUU.
Same outcome as the OP, but different problem. Perhaps he will clarify.
Click to expand...
Click to collapse
ok this is the issure phone is in bootloop now...............i relocked and flashed stock rom (ruu) as i said process 65% goes normal then suddenly shows 100% process complete but still phone in bootloop and im sure nothing is changed in my phone....but i can goto bootloader and even i can unlock phone again.....and i can run fastboot commands ....phone still in s-on.....
@ramjet : even if i flash custom rom after unlocking still my s-on is there to block and its not letting me to process it (no backup is taken b4 im so stupid here)
plz help me to solve this problem i just want this phone to run normally
It looks like you are on a GSM version of the 3d but the process is the same as the Sprint CDMA version we have, just different files (have to trust u on having the right Ruu, recovery, & Rooted Rom files).
Did u put the phone into "fastboot USB" mode, connect to pc and run the Ruu.exe from Windows OS when u did it?
As Ramjet73 was suggesting...
After u unlock the bootloader, are you able to use fastboot commands to flash a recovery.img? ie..
fastboot flash YourRecoveryFileName.img (to install recovery)
Then
fastboot boot YourRecoveryFilename.img (to boot the custom recovery)
Then flash a Rooted Rom from your sdcard with the recovery and reboot.
* keep in mind that you must enter the recovery via the above "fastboot boot.." command prompt every time you want to flash a Rom/kernel with S-on or you will bootloop because the kernel never gets loaded *
Sent from my "Up all night, Sleep all day" EVO3D!
Alright, I might as well post in this semi-fresh topic. I tried to change roms tonight and got stuck in a boot loop. It loads the HTC white screen, starts a little past that and then resets. I've tried wiping my data, and both caches. I've made sure SmartFlash is enabled on 4EXT because I'm S-On. I've tried it with SmartFlash disabled, too. I tried fastboot boot recovery.img to install my rom and my kernel. I can't seem to get out of this loop. Any advice?
Glee, please state your full phone/carrier /specs / recovery/rom if you want help. If you are CDMA/Sprint, I suggest you read through the HTC Unlock/Hboot 1.5x Guide (in my signature), specifically the linked post about flashing Roms/kernels via Fastboot/Recovery. Then you will be better prepared to explain what you've done so far.
Sent from my "Up all night, sleep all day" HP CM9 Touchpad
SOLVED
Hey, I have htc evo 3d gsm (shooteru). I unlocked the bootloader using htcdev.com and installed clockworkmod recovery. Then I changed cid to HTC__001 and tried to flash a gingerbread ROM in preparation for using the flashmaniac tool to downgrade my hboot (1.53.0007 -> 1.49.0007).
But when I tried to flash the gb rom the recovery said that installation finished but the phone did nothing after reboot. So I took out the battery and went into bootloader and everything looked the same as before the flash attempt. So I tried once again with same result. Then I powered off the phone and now when I turned it on again it only shows the HTC logo for a few seconds and then nothing (the buttons at the bottom have their lights turned on though).
Any ideas?
Yes, hboot version not compatible with gb rom, and or boot partition didn't get flashed. Unlocked but s-on doesn't let boot partition have write if booted into recovery in a normal way.
So yoy can get boot.img from install zip and flash with fastboot
fastboot flash boot boot.img
Or you can reinstall from recovery if booted from fastboot command.
fastboot boot recovery.img
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
Yes, hboot version not compatible with gb rom, and or boot partition didn't get flashed. Unlocked but s-on doesn't let boot partition have write if booted into recovery in a normal way.
So yoy can get boot.img from install zip and flash with fastboot
fastboot flash boot boot.img
Or you can reinstall from recovery if booted from fastboot command.
fastboot boot recovery.img
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Click to expand...
Click to collapse
Somehow got it at least to bootloader, no idea how, just tried taking out battery a few times and charging it a bit and it worked.
Thanks for the advice, didn't realize there was a difference between these flashing methods.
randomguyhtc said:
Somehow got it at least to bootloader, no idea how, just tried taking out battery a few times and charging it a bit and it worked.
Thanks for the advice, didn't realize there was a difference between these flashing methods.
Click to expand...
Click to collapse
Power + volume down when turning on will get you into bootloader
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
jcfunk said:
Power + volume down when turning on will get you into bootloader
Sent from my DOWNGRADED EVO 3D, remember all development is done on my phone, not a computer
Click to expand...
Click to collapse
I know , it just didn't work for some reason before.
So I flashed the boot.img and now it's stuck in a boot loop. Tried going to cwm recovery and wiping various caches etc and flashing again, and flashing boot.img again but it still goes into boot loop.
I would just use the flashmaniac's tool anyway because I don't care about any data on the phone or anything, but it seems that it requires the phone to be booted before it can start the downgrade.
What should I do? Try to flash other roms maybe? The one that I have now is EU_Shooter_U-1.20.401.8_ROOTED.
So I extracted a rom.zip from a RUU but it won't flash from cwm "Can't open /sdcard/rom.zip (bad)", should I try to flash it with adb/fastboot? I'm worried that the zip may be broken (even though archive manager integrity check says its fine).
Would this work with shooteru/GSM?
[TOOL] Ultimate Recovery Tool 3.1 (Unbrick, Downgrade, VM Radio Fix/Reset)
I'm thinking it might be a way to sidestep the boot loop problem that I have now, just relock the bootloader and follow the instructions until I get HBoot 1.40.something like the guy in the video?
Do I need some special drivers when using the RUU executables on Windows?
So I've got it to work. The problem was what jcfunk said (both of the things he mentioned, actually), I was trying to flash a GB rom when I should have tried an ICS rom instead (lol). After going to ICS RUU, I did the wire trick (unlimited.io) and now everything works nicely and I can get the latest roms.
Glad to hear.