[req]auto download mms - Galaxy Ace S5830 General

haw can i send and receive mms without enable data transfer???
like lewa rom..dont need to enable data transfer..
wanna make on another roms...

Related

Custom ROM MMS Mini Guide (If you don't usea prepaid data plan) By: Blitzkri3g

Blitzkri3g said:
Well I m on Floyo 0.15 and had some issues with MMS sending/receiving.On stock 2.1 SE ROM when you have Mobile Data OFF,our X8s still automatically use GPRS to handle mms messages.On Floyo and other ROMS you need to turn it ON which may result in additional charges from your carrier if you don't use a prepaid internet data plan.
So what do you do in this case you may ask! Well if you only use WIFI for internet and still wanna use MMS you should customize APN Settings.
First google you carrier's APN settings for MMS and set it up manually.Be carefull to not use capital letters on some fields!
Then delete every other APN settings leaving Mobile Data ON all the time and Reboot!
This way you can MMS technology without any fear of additional internet charges. ;-)
APN Settings can be found in WIRELESS ->MOBILE NETWORKS->APN menu in any custom ROM!
Click to expand...
Click to collapse
this may be useful for you too
don't forget to thank any useful post ;-)
Original thread here
big thanks to Blitzkri3g
APNs for x10mini CELCOM [ROM] MiniCM6-1.0.0-RC2
--------------------------------------------------------------------------------
I usually send SET to 20999 to get my setting from my service provider(CELCOM)
They will give me a configuration message that i will save to set my APNs automatically.
But after installing ([ROM] MiniCM6-1.0.0-RC2, Froyo Cyanogen 6.1.3), it seems like i cannot receive the configuration message or in other words maybe the custom rom cannot read the configuration message.
Please Help Me With This
kingmagauk said:
APNs for x10mini CELCOM [ROM] MiniCM6-1.0.0-RC2
--------------------------------------------------------------------------------
I usually send SET to 20999 to get my setting from my service provider(CELCOM)
They will give me a configuration message that i will save to set my APNs automatically.
But after installing ([ROM] MiniCM6-1.0.0-RC2, Froyo Cyanogen 6.1.3), it seems like i cannot receive the configuration message or in other words maybe the custom rom cannot read the configuration message.
Please Help Me With This
Click to expand...
Click to collapse
backup 1st ur apn setting using backup and restore in stock rom..flash custom rom then restore it..after that install quick setting from market..enable data off mms on and 3g data on then reboot..if this solve the problem thanks @hahuhe for his information in this thread http://forum.xda-developers.com/showthread.php?t=1014585
and me..

[Q] No data connection after sending MMS

Hi,
i´m using FreeX10 beta4 ROM on my X10i.
After sending a MMS i dont have a data connection anymore.
I already try the reboot and the APN settings are also ok.
How can i bring back my data connection?

[Q] MMS problem

Hello
I got a big problem that i can't resolve alone. I configure a new APN on my tab and i can access 3G+ but it seems my MMS profile doesn't work. I can't send or receive any MMS....
I join 2 different configurations for Android , one for HTC and the second for Samsung galaxy tab. Anyone can give me any solution to sent an MMS with that?
Thanks a lot!
Pleaaaaassssse help!
I don't know about samsung tab but if it happen to me I will flash a new rom.
Sent from my ViewPad7 using xda premium
It would be helpful to post a little more details on your Vpad7 basics so that maybe, one of us can help figure it out or test our ROM:
Let's take a simplistic step-by-step approach first -
a. are you using stock/factory ROM or rooted, custom ROM including verison #
b. your mobile carrier for the SIM card, both SMS and MMS enabled & working on another quad-band GSM phone
c. SMS working on the Vpad7 as is - both incoming & outgoing
d. using the default Messaging feature/module installed or using something else,
and if you haven't try it already, download & use Handcent for SMS/MMS
f. if you have already done all or some of the above, do a Master Reset on the Vpad7 first to clear all the existing settings, boot into RECOVERY to wipe dalvik/cache/system, and then flash, as suggested, a different custom ROM.
g. any technical support or help from your mobile phone carrier
Cheers - mastering everything on the V is a challenge !
First , i've tried with standard rom. No succes. Then i flashed my vpad7 , installed TJ's rom and... same problem.
BTW you're true , i'll try my sim on another phone , try MMS. And i'll try to put another sim in my vpad7 too.
But , i just think one little thing is missing , because when i look at the other froyo's config , some little thing are changing between diferent phone model.
So , i think viewpad need a personnal configuration.
I got Gosms and tried to configure MMS on the program settings , but same problem.
I've called the technical support but can't help me and told me : "we have some configuration on website , try these , if it don't work , not our fault"
Thanks for your help
Does anyone can send me any working config for MMS on viewpad 7? Just want to see what's different.
THANKS...
These are mine under Settings > Wireless & networks > Mobile Network > APNs, they're OTA/downloaded automatically & self-configured
AT&T MMS (wap.cingular)
Proxy (Not Set)
Port (Not Set)
Username & Password (Not Set)
Server (Not Set)
MMSC (http://mmsc.cingular.com)
MMS proxy (66.209.11.32)
MMS port (80)
MCC (310)
MNC (410)
Authentication (Not Set)
APN type (mms)
Note - these are nearly identical to AT&T WAP, which is usually configured for web browsing with data enabled.
Ok , i tried all solutions and then:
My sim works on other phone , i can send MMS .
Another Sim on my viewpad ( different operator) , once configured , worked. So it's not a viewpad or sim problem , just a Digicel configuration problem.
Any solution?
MMS Working Alternative
I have a Htc Evo 4G synergy rom,I tried all fixes to no avail...I did happen to get internet working..so 1 day while texting my daughter ,we both use Go sms pro ,i went into the setting where you can doodle,well theres an attachment feature to insert images and add a picture...well it works!! And now my solution is here...works for me.

[Q] Auto retrieve MMS messages SE with walkman

My problem
I use stock rom .58 for my SE with walkman. I rooted it and remove all application I dont need, make CW recovery and all is ok.
I can send MMS , but I dont receive if anybody send MMS to me (I also can send myself, but also dont get it)
Since I was remove default SMS/MMS application and use GO SMS pro in that application says: If you have trouble retrieve MMS in your stock app enable automatic retrieve of MMS. And since I remove stock app how can I do it?
Can I edit some files to enable it?
Or if somebody know, where that can be enabled in stock rom?
Give me path , thanks!
u dont make any backup before removes apps?
NO, I test my mobile phone, everything is looks ok, so I delete backup. So can you help me , or just reply to make criticism?
Backround data enabled?
Sent from my ST15i using XDA App
Mobile network settings - Data enabled YES ( if you mean that)
Try handcent sms https://market.android.com/details?id=com.handcent.nextsms
Sent from my ST15i using XDA App
Same thing: can send cannot receive: please look at first post, I need to find way to activate auto retrieve in stock application: so I must edit one or more settings, I doubt any application will do that for me...
i know that hanced sms has that option 4 auto retrieve

Data Connection on NeatROM enabled by default

Hello,
I am unable to write in NeatROM thread. So please somebody send my message to @sale.
So here is my problem:
Everytime when I need to reinstall NeatROM - data connection is enabled by default. Until I stop it - all my credit is gone!
Not everybody uses unlimited subscription plan!!! Data Connection should be disabled by default like it was in older versions.

Categories

Resources