Nook won`t boot after cwm failed to install img - Barnes & Noble Nook Tablet

Nook tablet 8gb won`t boot after cwm failed to install cm7 img. Cwm version 5.5.0.4, just hangs on me everynow and then. I managed to boot from sd card created with cm7, i can boot on sd, but one large piece of my sd card is not accesable, i can not create partition or increase size of the first partition created by cm7 img. Also i`m trying to use adb to run "parted" script, but lt just wont let me, permission denied, i`ve tried chmod 777 sdcard, and chown root it too...
Ok...because i`m so really tired of f..ing around this that nook and spended too much time on it, instead of being with my family, all i want is to make that big chunk of sd card partitioned and accessable, so i can wath movies and read books, thats all i want after 3 days of torcher...

You had to search a bit more
http://forum.xda-developers.com/showthread.php?t=1570022
~ Veronica

No time for installing linux and figuring out how it works etc...maybe later... just how to make 4th partition on sd card visible....

http://forum.xda-developers.com/showpost.php?p=24801112&postcount=257
~ Veronica
Sent from my Nook Tablet using xda premium

Devol said:
No time for installing linux and figuring out how it works etc...maybe later... just how to make 4th partition on sd card visible....
Click to expand...
Click to collapse
Download this: http://www.partitionwizard.com/download.html
You can see the partitions of your SD card and make changes to them.
EDIT: Or use the software that Veronica directed you to.

Thanks, i`ve resized it, but i can not assign any drive letter to it because of windows restrictions...

Devol said:
Thanks, i`ve resized it, but i can not assign any drive letter to it because of windows restrictions...
Click to expand...
Click to collapse
Use linux or http://forum.xda-developers.com/showthread.php?t=1585572
~ Veronica

btw, i`ve tried FIX/FLASH STOCK RECOVERY, and it started to reflash, but came up with an error, telling to reboot one more time and write to bn support, after that than i tried the same procedure with adb and stock recovery file it gave me only read forever screen..(
PS: managed to get there again, but it fails around 25% of writing...

Devol said:
btw, i`ve tried FIX/FLASH STOCK RECOVERY, and it started to reflash, but came up with an error, telling to reboot one more time and write to bn support, after that than i tried the same procedure with adb and stock recovery file it gave me only read forever screen..(
PS: managed to get there again, but it fails around 25% of writing...
Click to expand...
Click to collapse
I have put a procedure for 8GB model, read it up. just try to flash stock recovery then use the stock 1.4.2 update .zip to unbrick and go back to purely stock. Do not attempt to flash CWM until there is a fully working version for 8GB NT model, anyways you can't flash any other ROM so...
PS: read my FAQ, link in my signature
~ Veronica
Sent from my Nook Tablet using xda premium

If you mean by saying: "flash stock recovery img" - to adb push to /data, i did that, and after that i`ve tried booting with 1.4.2 zip on sd card...resulting in failure at around 25% of installation. Will that linux stuff help me fix that problem?

Devol said:
If you mean by saying: "flash stock recovery img" - to adb push to /data, i did that, and after that i`ve tried booting with 1.4.2 zip on sd card...resulting in failure at around 25% of installation. Will that linux stuff help me fix that problem?
Click to expand...
Click to collapse
Oh I see. Did you get an error or it just hung at 25% while attempting to flash stock 1.4.2 from sdcard.
If you want to troubleshoot this then post it up in my thread so I try to help you there, is better for future reference . And you need to be more specific. Check last page of that thread.
~ Veronica
Sent from my Nook Tablet using xda premium

Which thread exactly? It became a bit messy since my last time here in 2007. as i said, it gives an error while flashing 1.4.2 rom at around 25%, asks to try again or write to tech support.

Related

Auto-Nooter 3.0.0 (1.1 only)

*ALL THE USUAL DISCLAIMERS AND WARNINGS*
*THIS IS FOR VERSION 1.1 ONLY, DON’T TRY ON 1.0.0 OR 1.0.1*
Credit goes to: GabrialDestruir for the original auto-nooter, GLa’DOS for the boot animation, pokey9000 for nooter, Mistar Muffin for Market and GTalk Fix, clockworx for the “non-ugly” patch that is used to get androidID, mastapsi for testing and coding of the original auto-nooter, lewellyn for coding, [mbm] for ABI Fix, Hotaru for the Gingerbread keyboard, rpollard00 for DroidX keyboard with bigger font, bpk for Soft Keys, Ben74 for NookColor Tools which enables Non Market Installs and re-enable of ADB , Freenode's #nookcolor chat for code checking. A special thanks to all developers out there, without all of you this community would not be as great as it is.
Please Note: If you are the developer of an app that is included in this work, and would like me to remove it, feel free to contact me.
*I am copying the following step from the original auto-nooter, because they are tried and true, and people are already familiar with seeing them*
What it does:
Installs su and Superuser.apk
Installs Busybox with whoami
Installs Softkeys 3.0.6
Installs NookColor Tools (To Enable Non-Market Installs, and re-enable ADB)
Installs Calendar and Calculator.
Installs Android Market, Gmail, Youtube
Installs Gingerbread Keyboard
Enable ADB
Enable Multi-touch for Android Apps
Enables Live Wallpapers
Enables Android Market and Gmail.
App Auto Install (Open up NooterFiles from sdcard drop in /data/app)
Known Problems:
With the version 1.1 update, ADB will not stay active after a reboot or unplug of the cable. To enable each time you want to use it, you will have to go into NookColor Tools /All Settings/Development/USB debugging, you will have to uncheck the box and then recheck it.
How to Use:
Before you begin:
* To update to 1.1 you must do a complete wipe.
* You must update to 1.1 to use Auto-Nooter 3.0.0 Instructions HERE.
1 You must already have a registered NOOKcolor
2 You must have a Gmail/Youtube linked Account. IF you used a Gmail account for B&N Registration you should use that one for this process.
3 You must either have dd (Linux) or WinImage (Windows) software.
4 You must have an external microSDCard reader or this will not work. Do NOT use the NC.
5 You must have enough intelligence to follow instructions.
Let's get started:
1 Download Auto-Nooter from here: MultiUpload or MediaFire
*MD5 FB74865663B8D797A486A85022FAD9B2*
2 Linux: Unzip and use dd if=auto-nooter-3.0.0.img of=/dev/sdcard
2 Windows: Unzip and use WinImage to "Restore Virtual Hard Disk Image" to your SDcard.
2 Windows Alternative: https://launchpad.net/win32-image-writer/+download
3 Unplug your NOOKcolor from computer. (If Plugged in.)
4 Insert AutoNooter SDcard into your NOOKcolor.
5 Plug the USB cable into your computer and your NOOKcolor. (This will boot up the NOOKcolor.)
6 Your NookColor will reboot when it's done.
That was the hard part, now to the simple stuff.
7 Upon boot unlock your screen.
8 At the Android Welcome Screen skip Sign In.
9 Enable Location Services when given the option.
10 Connect to Wifi and launch Youtube from "Extras".
11 Click the Menu button (The one RIGHT of the Up Arrow).
12 Select "My Channel" and Login using your Gmail Account.
13 Exit Youtube and Launch Gmail from "Extras".
14 Sync your Gmail Account and Exit. (If it fails to sync that is fine.)
15 Open up Market and Accept Terms and Service.
If you made it this far your nook should be successfully Rooted. Go Download an App to make sure.
16 Enable Non-Market Installs by running the NookColor Tools App.
17 If your Youtube fails to launch, download the attached EVO HQ, and follow this code in adb
Code:
adb shell mount -o remount,rw /dev/block/mmcblk0p5 /system
adb uninstall com.google.android.youtube
adb push YouTube.apk /system/app
adb reboot
18 Go to Settings > Device Info > SdCard > UnMount > Format
Complete Wipe:
1 8 Failed Boots > Wipes /system
2 Factory ResetFactory Reset > Wipes /data
*You must do both of these to completely wipe clean your NOOKcolor.*
*Before anyone starts to say that I took this project away from GabrialDestruir, I posted this file in the original post, and sent the OP a PM asking to update the current project. I have yet to hear back, and the post was not updated. My post can be found HERE, dated February 2, 2011. I felt that this would be of a benefit to the community, so I am posting it now. If I am asked at some point to take it down I will do so at that time.*
Forgive my ignorance here, but I thought you were never supposed to use the NC to format your SD card? (last step)
I thought I read somewhere that it messes up something in the emmc?
Hopefully I'm wrong and just paranoid
danbutter said:
Forgive my ignorance here, but I thought you were never supposed to use the NC to format your SD card? (last step)
I thought I read somewhere that it messes up something in the emmc?
Hopefully I'm wrong and just paranoid
Click to expand...
Click to collapse
I have never really seen an explanation as to why you don't format on the NC. I have formated via the NC and the card works fine both in the NC and my PC. When I want to burn an image, I have been able too. Been able to flash other images on it too.
Excellent!
Can you please add an MD5 to the first post?
Homer
danbutter said:
Forgive my ignorance here, but I thought you were never supposed to use the NC to format your SD card? (last step)
I thought I read somewhere that it messes up something in the emmc?
Hopefully I'm wrong and just paranoid
Click to expand...
Click to collapse
Formatting the SDcard doesn't touch the onboard storage. It is one of the easier ways to remove bonus partitions to recover the full card. UPDATE: I should clarify this: when running Eclair internally.
Homer
Any benefit of this over the 1.1r2 many of us did from autonootered 1.0.1?
danbutter said:
Forgive my ignorance here, but I thought you were never supposed to use the NC to format your SD card? (last step)
I thought I read somewhere that it messes up something in the emmc?
Hopefully I'm wrong and just paranoid
Click to expand...
Click to collapse
You're thinking of Nookie Froyo. The stock B&N system is fine for formatting the card.
I think formatting the SD card is an issue when you use one of the Froyo images and boot from eMMC. When you format the SD card it actually formats the internal boot partition or some such. I remember reading it in one of the threads which led me to only boot the Froyo images from an external card.
I am at 1.1.0. When did 1.1.1 appear & how do I get it?
BTW Is this exactly the same as the interim A-N 2.12.25 modified for 1.1?
k
I'd say it's a typo and should be v1.1?
Canadoc said:
Any benefit of this over the 1.1r2 many of us did from autonootered 1.0.1?
Click to expand...
Click to collapse
also interested to know that!
And if there is benefits, can we use the auto nooter?
Just for clarification, in steps 3 & 4 should the NC be turned off? I have never been sure if it matters, but the following statement makes me think that it should be off,
"5 Plug the USB cable into your computer and your NOOKcolor. (This will boot up the NOOKcolor.)"
Thanks,
kev
danbutter said:
Forgive my ignorance here, but I thought you were never supposed to use the NC to format your SD card? (last step)
I thought I read somewhere that it messes up something in the emmc?
Hopefully I'm wrong and just paranoid
Click to expand...
Click to collapse
Only with the froyo image.
Canadoc said:
Any benefit of this over the 1.1r2 many of us did from autonootered 1.0.1?
Click to expand...
Click to collapse
The main difference I see is that Clockwork recovery is not involved.
johnny054 said:
also interested to know that!
And if there is benefits, can we use the auto nooter?
Click to expand...
Click to collapse
I guess it should be the same, but I had a couple of games break after up'ing with 1.1_r2. So I wanted to try stock/clean 1.1 and then root...hoping this would bring them back.
help please
I'm having a problem rooting my nook color. 2 weeks ago I was fully rooted and for some reason I forget why? but I went back to stock. recently I updated to the newest Barnes & noble firmware. seeing the recent developments of honeycomb I wanted to root my nook again. so I tried downgrading to firmware before the most recent update and using that version of auto nooter. I followed the instructions exactly to a tee. the problem is my nook wont load the disk image from the sd card. I made sure to fully format the sd card before writing the img with Win32DiskImager. I made sure the nook was completely off then plugging in the usb to into the pc to wake up the nook. but nothing? the nook boots up like normal then says sd card damaged. I've formatted the sd card again and have used the newest nooter for my current 1.1. but nothing. the only difference is the first time I rooted I was at my mothers and used her pc. it was a windows vista 64 bit. my computer is windows seven 64 bit. anyone have any idea's as to why the nook wont load the sd card with the nooter image? I'm using the same sd card I was able to root from before. so I seriously doubt its the sd card. I am properly formatting it before writing the img. I am having no problem writing the img. any help would be appreciated
danbutter said:
Forgive my ignorance here, but I thought you were never supposed to use the NC to format your SD card? (last step)
I thought I read somewhere that it messes up something in the emmc?
Hopefully I'm wrong and just paranoid
Click to expand...
Click to collapse
brianf21 said:
Only with the froyo image.
Click to expand...
Click to collapse
Ok thanks for that clarification. I was pretty sure I read it somewhere!!
trentmaynard said:
I'm having a problem rooting my nook color. 2 weeks ago I was fully rooted and for some reason I forget why? but I went back to stock. recently I updated to the newest Barnes & noble firmware. seeing the recent developments of honeycomb I wanted to root my nook again. so I tried downgrading to firmware before the most recent update and using that version of auto nooter. I followed the instructions exactly to a tee. the problem is my nook wont load the disk image from the sd card. I made sure to fully format the sd card before writing the img with Win32DiskImager. I made sure the nook was completely off then plugging in the usb to into the pc to wake up the nook. but nothing? the nook boots up like normal then says sd card damaged. I've formatted the sd card again and have used the newest nooter for my current 1.1. but nothing. the only difference is the first time I rooted I was at my mothers and used her pc. it was a windows vista 64 bit. my computer is windows seven 64 bit. anyone have any idea's as to why the nook wont load the sd card with the nooter image? I'm using the same sd card I was able to root from before. so I seriously doubt its the sd card. I am properly formatting it before writing the img. I am having no problem writing the img. any help would be appreciated
Click to expand...
Click to collapse
You probably have a bad burn on the sdcard. Are you writing to the sdcard from the sd card reader or from the nook? Also, if you return to stock, (8 failed boots, then Power+N) You should be on firmware 1.0.0 or 1.0.1. Then root using one of the two original auto nooters, download rom manager from the market and flash the 1.1 pre-rooted firmware.
Thanks buddy, I try doing that. and I don't have an sd card reader so I just put the sd card that I'm going to write into my cell phone. then mount the sd card and write the img to the same storage device that represents the sd card. I'm sure this is the wrong way of doing it but I have gotten root doing the same thing before
Giving this a go now, coming from auto-nootered 1.0.1.

[Q] Bricked and Malfunctioning Partitions

I have a GTab that was running Calkulin + Clemsyn Combo Overclock at 1.5 ghz V8 on the 1.2 branch fine for a couple months now, then something happened today. Woke up to find there was no sound coming from it (I'd left an Anti-mosquito app running all night), so I tried to play a couple music files. Seemed to get frozen instead of playing, so I restarted. That's when it went into a boot loop from 3 birds to the first splash screen of the loaded ROM.
Attempted to do a backup via CWM, and it failed on /data. Tried a data wipe/reset, then reflashing the ROM and finally NVFlash. Still goes into a bootloop. Repartitioning and mounting doesn't do anything; ADB doesn't see the device at all in CWM or APX; /data cannot be mounted and /sdcard mounts only when a card is inserted (doesn't see the internal space) but still doesn't mount USB storage and says: "E:Unable to write to ums lunfile (No such file or directory)"; drive shows in Win7, but is inaccessible;
As mentioned, APX mode and NVFlash along with CWM works fine. And I can mount /cache and /system fine. I've gotten to Code Double Red here and now I'm draining the battery for the next step (really don't want to pull any screws). Also tried the fix here, but it seems that's just for CM7, which I'll probably try flashing some time.
I'm going to return to the 1.1 branch and try a couple ROMs there, but I have a really slow connection and it's taking a while to get nvflash 1.1.
Did a quick search of the forum and didn't find anything quite similar. Obvious question is, has anyone ever experienced this before? What are some other steps I can take to fix this? Is there a way to backup the internal SD before I probably have to wipe it?
Connect the USB cable to the tablet, then boot it into CWM, and run this command on your PC:
Code:
C:\SOME\PATH> [B]adb shell dmesg > dmesg.txt[/B]
Post that dmesg.txt file here. We'll see what's wrong.
Connected the charger long enough to run the command, but all I get is "error: device not found". As I'd said, ADB doesn't detect the tablet, even though Windows knows when it's connected and disconnected. Is there anything that I can flash to get me a terminal? That's the only way I can think of to get that command run and hopefully direct the output to my SD. Thanks.
I now have a completely dead battery. Wondering what to do next since it's supposed to have been hard reset now. Not seeing anything different after booting; same boot loop even though I just flashed a ROM again.
rajeevvp said:
Connect the USB cable to the tablet, then boot it into CWM, and run this command on your PC:
Code:
C:\SOME\PATH> [B]adb shell dmesg > dmesg.txt[/B]
Post that dmesg.txt file here. We'll see what's wrong.
Click to expand...
Click to collapse
I had seen this thread before where you were helping someone last year. Wish I'd read further to see that he eventually got the same problem I now have. I'm currently working my way through everything. First I need to get ADB running though, so I'm working on that now. Think I may be needing that partition swap trick, but we'll see...
Having issues getting the right USB drivers installed for ADB on Windows 7 64 bit. Using instructions here. But each time I uninstall the device, as soon as I plug in the tablet, it installs the default drivers. Using both Device manager and USBDeview. Updating and other options are also disabled when there is nothing installed. Considering to do a direct registry hack of the device info if I can, and hopefully not break anything important.
Try using Linux.
I finally got ADB working on my system and did some experimenting. Seems there's definitely something wrong with my internal SD according to the dmesg output. Luckily I have a SD which I used in my SG3, and it is already properly partitioned, so I'll try using that. Tried making a fstab file in /etc (mtdblock3) but I got "Magic Value Mismatch" error, so I NVFlashed to return it to how it was. I'm currently researching how to create update files, because it seems that's the only way I can get the SDs swapped. Any guidance is still welcomed. Thanks alot.
Skele Drew said:
Seems there's definitely something wrong with my internal SD according to the dmesg output.
Click to expand...
Click to collapse
Yeah. There are clear error messages relating to the internal SD card. You can either return the tablet and get a replacement, or, use my SD card device swapping technique to use the external SD in place of the non-working internal one.
Tried making a fstab file in /etc (mtdblock3) but I got "Magic Value Mismatch" error, so I NVFlashed to return it to how it was. I'm currently researching how to create update files, because it seems that's the only way I can get the SDs swapped.
Click to expand...
Click to collapse
If you use my files, you don't need to modify anything manually. What're you trying to change, BTW?
I can definitely use some help there. Where are the files? I tried modifying the custom ROM I use by adding a custom fstab and vold.fstab to /etc, an init script to init.d and replacing the /data mounting command with:
Code:
ui_print("Copying Data Files");
run_program("/sbin/mount", "-t", "ext3", "/dev/block/mmcblk2p2", "/data");
ui_print("Mount information:");
ui_print(run_program("/sbin/mount"));
Not sure what you're attempting to do here...
If you just want to use an external SD card in place of your non-working internal one, then all you have to do is a) flash either one of the CWM zip files and then b) flash the SD card swapping zip file right after you install the ROM of your choice. And, if you tell me which ROM you plan to install, I can look inside it and tell you if my scripts will work with that ROM.
If you can read shell/awk scripts, you can look inside the zip files to see what they do and how they do it.
rajeevvp said:
Not sure what you're attempting to do here...
If you just want to use an external SD card in place of your non-working internal one, then all you have to do is a) flash either one of the CWM zip files and then b) flash the SD card swapping zip file right after you install the ROM of your choice. And, if you tell me which ROM you plan to install, I can look inside it and tell you if my scripts will work with that ROM.
If you can read shell/awk scripts, you can look inside the zip files to see what they do and how they do it.
Click to expand...
Click to collapse
I was trying to make a swap script myself, but it's not working. /system dir gets corrupted. I'm using Clemsyn_Caulkinver8final2, a Froyo ROM.
Look at my scripts. If you have any questions, just ask.
Where are the scripts? That's what I've been asking...
EDIT: If this is what you use, then all should be ok. Let you know the result when I'm again online. Thanks alot for your help!
That's what I was talking about. I modified the device-swapping script today to fix-up an additional shell script, /system/etc/inandop.sh, on the various Clemsyn/Beasty ROMs (incl. yours), so use the newer zip file.
rajeevvp said:
That's what I was talking about. I modified the device-swapping script today to fix-up an additional shell script, /system/etc/inandop.sh, on the various Clemsyn/Beasty ROMs (incl. yours), so use the newer zip file.
Click to expand...
Click to collapse
Appears it still doesn't work. However, now instead of having a boot loop, it's just stuck at the splash screen after the 3 birds. I'm going to try combining your script and the ROM to see if I can get better results. I'm also going to try inserting some log/debug messages where I can.
Skele Drew said:
Appears it still doesn't work. However, now instead of having a boot loop, it's just stuck at the splash screen after the 3 birds. I'm going to try combining your script and the ROM to see if I can get better results. I'm also going to try inserting some log/debug messages where I can.
Click to expand...
Click to collapse
THANK YOU RAJEEV!!!!!!!
Today I got the time to work on my tablet again, since I just restarted college and it's been a bit hectic. Decided to try CM7 since when I looked into your script I saw direct management for it, so I NV'd back to 1.1 (I didn't know what branch CM7 was on, but flashing CM7 on 1.2 gave an error and aborted). The first time I tried the CM7, it got to the CM7 logo, then was there for a while until I only had a black screen. The only way I knew the tablet was still on was because ADB was still connected. Then I flashed your script and VOILA! everything started great. So now I have my tablet again for my classes .
I am planning to still run a few tests to see if I can somehow recover/fix the internal SD, so I downloaded your set of e2fsprogs. Think I'll make a flashable file for the entire package.
Again, thanks for all your assistance. It's much appreciated. I really didn't have that much time anymore to work on it myself too. I will continue to learn more as time goes on though, and I hope one day I'll become a guru like you .
Skele Drew said:
Decided to try CM7 since when I looked into your script I saw direct management for it, so I NV'd back to 1.1 (I didn't know what branch CM7 was on, but flashing CM7 on 1.2 gave an error and aborted).
Click to expand...
Click to collapse
The official CM7 is, right now, only for 1.1. However, since you can replace just the kernel and instantly make a 1.2 ROM, you'll have to look at the kernel messages to tell which bootloader version you have (Note: this is only for pershoot kernels).
The first time I tried the CM7, it got to the CM7 logo, then was there for a while until I only had a black screen. The only way I knew the tablet was still on was because ADB was still connected.
Click to expand...
Click to collapse
This is to be expected. When a ROM first runs, it writes a whole bunch of stuff into /data; but, your internal SD card is messed up, so every write would've ended up with the kernel retrying for quite a bit and then failing.
You should've flashed the ROM and immediately afterwards my script to fix-up the mount points on the ROM--ie. before the first boot.
I am planning to still run a few tests to see if I can somehow recover/fix the internal SD, so I downloaded your set of e2fsprogs. Think I'll make a flashable file for the entire package.
Click to expand...
Click to collapse
I doubt if you can "fix" your internal SD card error using any of the e2fsprogs--it looks like a card-controller error rather than a media error. You have one of the non-standard internal SD cards which has caused problems for some other users as well.
Ok. I do have a few issues I hope I can get some help on. For one, flash player doesn't work, and that's something very important. All my browsers direct me to get flashplayer. It worked pretty well in my previous ROM, so it may be an issue with CM7, but I haven't seen any similar issues on their site.
Also, the tablet is less responsive now, though I think this has to do with the /data partition being on external SD, though it's a class 6 card.
Sent from my GTablet using Tapatalk
Did you partition the external SD card correctly into 2 partitions (the first as VFAT and the second as ext3) before you installed CM7? I'm not sure what steps from my post you followed and what steps you skipped: you mentioned you were planning to modify the scripts/ROM, right?
It is also possible that my script is not doing the right thing on CM7 since it doesn't touch the vold.fstab on it. Get me the output of a mount command in CM7, and these files:
Code:
/system/etc/vold.fstab
/system/build.prop
Also make sure that you, or the ROM provider, haven't enabled the SD card switching in Settings > Cyanogenmod settings.
The SD I'm using was in a SG3 using this ROM, so I think it's correctly partitioned. I've accessed the partitions before and the correct names are associated with the contents. I only followed steps 1 & 4. The option to use removable for apps and media is disabled.
build.prop
mount.txt
vold.fstab

Fix: How to fix "broken recovery" NT's

First, you need to be sure you install the sdcard version of the recovery, otherwise you won't be able to do this. (You need to goto this thread to install the sdcard version and follow instructions.
First of all, make sure your drivers are setup properly as this is a windows script to fix everything since you can only fix it from a computer. (I CANNOT EMPHASIZE THAT ENOUGH!)
Then you just download this zip, it check's md5 sum on the image before flashing so no worries, and then it flashes. It will reboot when it's finished.
I am in NO way responsible should anything happen, it was your fault for not checking the app's md5 in the first place so if this works for you, openly admit that you could have been better with handling the app's flashing. <-- Required.
I'm having a seperate thread so I can actively update this with anything that may arise since it would make my app's thread cluttered.
Read the whole thread or enjoy a broken Ntab, it's your choice.
Just wanted to say thanks for the dedication to those of us not smart enough to figure things out on our own.
Sent from my BNTV250 using Tapatalk
is this for those nt cannot use sd card recovery or 8 times boot break to restore the originally rom?
Dumb Question
Total noob question. What do you mean by drivers set up properly? I want to try this, but I do not want to screw up again, and I just want to be totally sure I understand this properly. Thanks.
Benblanko81 said:
Total noob question. What do you mean by drivers set up properly? I want to try this, but I do not want to screw up again, and I just want to be totally sure I understand this properly. Thanks.
Click to expand...
Click to collapse
Means that you must have your nook drivers installed and working, if you ever rooted then you should have your drivers working properly.
~ Veronica
Can't get this to work
I have verified that I have the proper drivers (thanks Veronica). I unzip the fix and run the batch file, but the window closes almost instantly. I am using an XP machine, because of installing the drivers when I rooted. I can not for the life of me figure why it wont run. I am booted into the sd card version of CWM. Do I need to mount it some way or just at the home CWM recovery screen. I have been looking for help without asking and bothering, but can't figure it out. Not a noob but totally confused. Any help would be appreciated. Thanks.
Oops! I managed to set the wrong error levels on it, I meant to do 0 and 1, I instead did 1 and 2. Anyway, uploading now.
Still no go.
I got the batch file to run but it does not finish. It starts the Deamon successfully, and it just stays at Deamon Started Succesfully. It has been there for about 45 minutes. Should I wait or can I kill it and start over. Thanks again.
Kill it reboot your machine and start over
Sent from XDA premium using my Nook Tablet
No Go
Thanks Veronica, but the reboot still does the same thing. I just started the Nook&Zergy and the device shows up so I know the drivers are proper, it just stays stuck in Deamon Started Successfully for the fix. I am out of ideas, I fear I have just bricked my first device. I have doing this since the G1, this is sad.
No no, just do:
adb push cwm_internal.img /sdcard/cwm_internal.img
adb shell
then type:
dd if=/sdcard/cwm_internal.img of=/dev/block/mmcblk0p3
First off great work Indirect. This is exactly what I was hoping that image creator would be used for, just working on other things and got preoccupied. I think you might have to do some explaining though.
One thing to note though is that CWM should not be used for any other then rooting your device. As it stands right now there is no reason to flash it to an internal partition, you will only risk messing something up, as it has no gains.
Overview:​In the Nook Tablet world there is a locked bootloader, which requires that there be a Secure Chain from u-boot, to the recovery. With the exploit that bauwks discovered and designed, we are able to flash custom recoveries on to the device. However a recovery must be packed.
Packing Structure:​​There are two ways that we have been able to go about getting around the boot loader, the internal method requires that we use the second U-Boot, with a 256k buffer and then attache the recovery after the buffer.
(0-m bytes) ------> (m-256k bytes) ------> (256k-n bytes)
Bauwks ntBoot Buffer nemiths CWM
The trick is that that 256kth byte must contain the header for the CWM, and this is vital. If that is lost, or something on Bauwks didnt get flashed right, you will enter a boot loop.
FAQ:​
What Is a 'broken recovery' NT?
A broken recovery Nook Tablet is one where either the NT's internal recovery structure was not writen correctly or one where the NT's internal recovery structure is missing bauwks boot.
How can I tell if I have a 'broken recovery'?
Assuming you have not messed with any other partitions if you do either the N + pwr method, or the 8 false boots, you should see it open the BN recovery. If your device constantly turns on and off after one of these two methods, then you have a broken recovery partition.
My Nook just continues to boot into the recovery whats this?
Aha now that is not a 'broken recovery' and is actually quite fixable. In the nook Tablet there are two files that relate to the booting structure, aka the selection of where to boot from. These lie on a partition called bootdata, and are named BCB and BootCnt. If you are running stock on your internal partition, just let the stock recovery run, and it will solve your problem. If you are running CWM, you will have to use the following commands,
Code:
adb shell mount -t vfat /dev/block/mmcblk0p6 /data
adb shell dd if=/dev/zero of=/data/BCB bs=1 count=1088
adb shell dd if=/dev/zero of=/data/BootCnt bs=1 count=1
adb reboot
Aaa this is confusing can't I just put the stock recovery on my NT?
Sure. Hopefully indirect will make a script soon, or I will make one tonight that will put the default recovery img back. If you are feeling lucky you can do the following while on CMW.
NOTE: I AM NOT RESPONSIBLE FOR ANY DAMAGES YOU CAUSE TO YOUR DEVICE. One false move and you will brick your device. HIGHLY UNRECOMMENDED
Code:
adb push recovery.img /data (this is the recovery from the 1.4.0 or 1.4.1 update zip)
adb dd if=/data/recovery.img /dev/block/mmcblk0p3 (THIS LINE IS [COLOR="Red"]EXTREMELY DANGEROUS[/COLOR]. It should only be done as a last resort, and you should only do it if you are willing to take full responsibility.)
Dead End.
I am going to start from the beginning. I flashed CWM using this app and the hit reboot into recovery from the app as well. Went to the cardboard box. I can reboot into CWM using the sd card method but can get no further. I have been trying the fix for two days and cant get it to work. Indirect gave me some ADB commands but I cant get ADB to work either. I have been on this for 2 days and cannot get it going. I really do not know what else to do. I am not a Noob and i know I have the proper drivers, the fix gets stuck though, and with the tablet in CWM from the sd card I just cant get ADB to work. I do not know if maybe because of usb debugging not being checked off, but again I can not boot up to Android, just to recovery from sd card. If I take out the sd card with CWM it boots to the cardboard box, then to black screen, and there it stays. I checked the thread for the app and people are still having this problem. I really do not know what to do. I have followed every instruction I have found or has been given to me, to the t, nothing.
UPDATE - I deleted the sdk and everything that had to do with Android from my pc. Reinstalled drivers using the method in the root thread that is pinned. I ran NOOK&ZURGY just to see my device appear in list of adb devices, which it did. It gave me my serial and it said recovery. I then redownloaded the sdk and did not download the Drivers from SDK manager. I am not sure but that seems to be the key here, to get rid of google drivers that can be downloaded from SDK manager. I then opened a command prompt, adb devices and bam there it was. I used the commands posted by LogLud above my post under "My nook just continues to boot into the recovery, what is this?". ADB Reboot and ****ing worked. THANKS TO INDIRECT, LOGLUD, and LAVERO.BURGOS. Your patience and help is greatly appreciated. I have never really asked for this much help before on XDA, and you guys were on the money, Thank You, Thank You, Thank You. Please PM me so that I can get you guys and girls beers. I will try to figure out how on my own anyways, but you guys deserve a contribution for taking the time out of your day to help me and others. Anyone with this issue and is having problems fixing, please post here or shoot me a PM and I will gladly give you all I can. Thank you again to all and happy flashing.
Benblanko81 said:
I am going to start from the beginning. I flashed CWM using this app and the hit reboot into recovery from the app as well. Went to the cardboard box. I can reboot into CWM using the sd card method but can get no further. I have been trying the fix for two days and cant get it to work. Indirect gave me some ADB commands but I cant get ADB to work either. I have been on this for 2 days and cannot get it going. I really do not know what else to do. I am not a Noob and i know I have the proper drivers, the fix gets stuck though, and with the tablet in CWM from the sd card I just cant get ADB to work. I do not know if maybe because of usb debugging not being checked off, but again I can not boot up to Android, just to recovery from sd card. If I take out the sd card with CWM it boots to the cardboard box, then to black screen, and there it stays. I checked the thread for the app and people are still having this problem. I really do not know what to do. I have followed every instruction I have found or has been given to me, to the t, nothing.
UPDATE - I deleted the sdk and everything that had to do with Android from my pc. Reinstalled drivers using the method in the root thread that is pinned. I ran NOOK&ZURGY just to see my device appear in list of adb devices, which it did. It gave me my serial and it said recovery. I then redownloaded the sdk and did not download the Drivers from SDK manager. I am not sure but that seems to be the key here, to get rid of google drivers that can be downloaded from SDK manager. I then opened a command prompt, adb devices and bam there it was. I used the commands posted by LogLud above my post under "My nook just continues to boot into the recovery, what is this?". ADB Reboot and ****ing worked. THANKS TO INDIRECT, LOGLUD, and LAVERO.BURGOS. Your patience and help is greatly appreciated. I have never really asked for this much help before on XDA, and you guys were on the money, Thank You, Thank You, Thank You. Please PM me so that I can get you guys and girls beers. I will try to figure out how on my own anyways, but you guys deserve a contribution for taking the time out of your day to help me and others. Anyone with this issue and is having problems fixing, please post here or shoot me a PM and I will gladly give you all I can. Thank you again to all and happy flashing.
Click to expand...
Click to collapse
Oh well you should had started your first post by saying im using SDK and you will have it fixed faster. SDK is not needed in windows, leave that for devs all the necessary stuff that you needed to root is provided in indirects permanent root thread including drivers.
Glad it worked!
~ Veronica
Please help
I used Indirects app to install CWM, it seemed to work fine, but when I tried to boot into CWM it flashes the picture of the box, then shuts off. I tried using this method to fix it, but the same thing happens.
What am I doing wrong? Please help. I'd hate to have bricked my nook.
lehite said:
I used Indirects app to install CWM, it seemed to work fine, but when I tried to boot into CWM it flashes the picture of the box, then shuts off. I tried using this method to fix it, but the same thing happens.
What am I doing wrong? Please help. I'd hate to have bricked my nook.
Click to expand...
Click to collapse
Did you try the method posted in this thread? you don't mention that , also can you boot normal if you let it or you cant? provide more info.
~ Veronica
lavero.burgos said:
Did you try the method posted in this thread? you don't mention that , also can you boot normal if you let it or you cant? provide more info.
~ Veronica
Click to expand...
Click to collapse
Sorry if I was not clear. Here is the entire process:
1. I have a rooted Nook Tablet.
2. I installed Indirect's One Click App to install CWM
3. I used that app to install CWM.
4. I attempted to boot into CWM, but it flashes the box and then shuts off
5. I came to this thread and began following the instructions to fix it, but the fist set of instructions "First, you need to be sure you install the sdcard version of the recovery, otherwise you won't be able to do this.(You need to goto this thread to install the sdcard version and follow instructions.)
6. I followed those instructions, but I still get the box image then shut down.
7. I can't boot normally or into CWM.
Let me know if you need any other information and I greatly appreciate your help.
What I really need to know is how to create the CWM sdcard on a mac. i.e. I don't have a linux machine with gparted and I can't figure out how to get something like Disk Utility to enable boot and lda flags.
Thanks!
bootable sd card with osx
Lehite, I was having the same problem, i.e. disk utility in osx couldn't do the job for me. I ended up using this method.
Download the “size agnostic” CM7 SD card installer image (v1.3 in my case), then write it to your microSD following the instructions on the before mentioned page. The writing takes a little bit without terminal telling you the progress, after 1-2 minutes it should be done.
After succesfully writing the image to your SD card copy the files from Goncezilla's SD Boot thread (here) to your SD card overwriting files if necessary and follow his further instructions.
On a reboot with the boot SD inside your nook you should get to the CWM menu after seeing the cardboard box. good luck!
I myself am also stuck at the black screen after the box and need to figure out how to get the ADB working on osx to be able to do Loglud's commands...
UPDATE: to get ADB working on osx I used this method. Since I'm not a developer I didn't download the whole SDK package from google but rather just the ADB tools from here.
I then connected the Nook to the mac while in CWM, checked if it was properly recognized but typing adb devices, and applied Loglud's adb commands. BAM! worked! Am back in android Many thanks to all for directions, especially Loglud.
Now a question to Indirect, I downloaded your package just today, while using it it verified the MD5 positively and continued flashing. Why did I get the black screen, and not the CWM?
cheers

[Q] Stuck in CWM loop

Hi,
I have a Nook Tablet in version 1.4.1 reset it back to 1.4.0, root it, tried to put cm9 in it...messed up royally, format a whole bunch of things that I shouldn't.
Now it's stuck in CWM v5.5.0.4
Tried just about everything, but can't get out. can't access adb, not very familiar with it anyway...but downloaded sdk, jkd, etc...but can't see device...tried recovery image also...doesn't work.
Is there any method aside from adb method? Is there an SD method...think I messed up the partitions or whatever...
tried this method:
http://forum.xda-developers.com/showthread.php?t=1555832
but doesn't work...
again can't see devices in adb...tried this & other methods...nothing..
http://forum.xda-developers.com/showthread.php?t=1363652
please help...
I actually have 2 Nook Tablets...one for my kids & another I'll give to a nun friend...1 is correctly rooted & has cm9...can I image one & flash it on another? If so, how?
Thank you & God bless
Have you tried making a bootable CM7 or CWM microSD card?
Solar.Plexus said:
Have you tried making a bootable CM7 or CWM microSD card?
Click to expand...
Click to collapse
I have a recovery.img...tried that didn't work
have boot.img tried that...CWM microSD
tried to flash SD_ROOT_NT16gbV4_6 onto microSD, but after that can't add anything else to it...the directions to partition microSD is somewhat confusing to me...don't quite know what to do or where to put boot file, etc...after I partitioned it...any advice is greatly appreciated...
"format a whole bunch of things that I shouldn't." BAD IDEA. Can you tell us what exactly you formatted?
Is always good to have adb working so you should troubleshoot it. In my FAQ there is a link for a how-to i made to install and use adb tool, run the runmefirst.bat from the package i provide is a must.
As an alternative (to non use of adb, etc tools) you can use Adam's total wipe (sdcard), which has been fixed by Adam to not affect serial ID's and MAC address from ROM partition.
~ Veronica
lavero.burgos said:
"format a whole bunch of things that I shouldn't." BAD IDEA. Can you tell us what exactly you formatted?
Is always good to have adb working so you should troubleshoot it. In my FAQ there is a link for a how-to i made to install and use adb tool, run the runmefirst.bat from the package i provide is a must.
As an alternative (to non use of adb, etc tools) you can use Adam's total wipe (sdcard), which has been fixed by Adam to not affect serial ID's and MAC address from ROM partition.
~ Veronica
Click to expand...
Click to collapse
I formatted....
bootdata, cache, data, emmc, rom, system, sd-ext....everything with the format in front of it...I did it...I know...not smart...
did the acclaim_update...doesn't work...CWM seems to be working...but just can't install acclaim_update or SD_ROOT_NT16gbV4_6...again can't access adb at all
What does it say when in CWM when you try to flash something?
thungrac221 said:
I formatted....
bootdata, cache, data, emmc, rom, system, sd-ext....everything with the format in front of it...I did it...I know...not smart...
did the acclaim_update...doesn't work...CWM seems to be working...but just can't install acclaim_update or SD_ROOT_NT16gbV4_6...again can't access adb at all
Click to expand...
Click to collapse
they won't work because you formatted most of your partitions, use Adam's total wipe as i said before or soshite unbrick method but for that one you need adb working.
~ Veronica
lavero.burgos said:
they won't work because you formatted most of your partitions, use Adam's total wipe as i said before or soshite unbrick method but for that one you need adb working.
~ Veronica
Click to expand...
Click to collapse
I don't have ubuntu, think I saw a link from you to create a virtual ubuntu? Please post that again...Thank you
nevermind...found the link...will try...thanks again
thungrac221 said:
I don't have ubuntu, think I saw a link from you to create a virtual ubuntu? Please post that again...Thank you
Click to expand...
Click to collapse
I use virtual box: https://www.virtualbox.org/wiki/Downloads
If he has cwm he has adb.
Just guide him to install correct drivers for it.
Solar.Plexus said:
What does it say when in CWM when you try to flash something?
Click to expand...
Click to collapse
tried to install recover.img, but Error mounting /sdcard..tried mounting, but can't
thungrac221 said:
I don't have ubuntu, think I saw a link from you to create a virtual ubuntu? Please post that again...Thank you
nevermind...found the link...will try...thanks again
Click to expand...
Click to collapse
Well, I download the adam's image for windows, but in CWM cannot mount sd card...oddly, when I plug it into my computer, it sees the nook but cannot start adb...tried methods to recognize usb, but can't...
please advise....thank you
Go here, https://github.com/succulent/acclaim_recovery_sdcard
Make a new recovery card from the instruction. Forget your old recovery card.
Install these two,
flash-restore-stock.zip (use it to restore partition 1-6)
flash_stock_1.4.2.zip (use it to restore to stock 1.4.2)
Then install whatever rom you want after.
succulent said:
Go here, https://github.com/succulent/acclaim_recovery_sdcard
Make a new recovery card from the instruction. Forget your old recovery card.
Install these two,
flash-restore-stock.zip (use it to restore partition 1-6)
flash_stock_1.4.2.zip (use it to restore to stock 1.4.2)
Then install whatever rom you want after.
Click to expand...
Click to collapse
Thank you, thank you...used only this flash-restore-stock.zip & was able to find my way back... thanks a lot...my friend who is a nun will enjoy this when she goes to Ghana on her mission...she wanted this instead of carrying loads of spiritual books...thanks again... & God bless
I second that succulent with your post I was able to find my way back after flash-restore-stock.zip. My issue was Nook kept on booting CWM. Now I have to figure out how to boot CWM via USB again to flash stock rom. For now it takes me up to B&N member setup page, but only shows error when I enter info
Okay I wiped my internal emmc, so there is no OS. When I turn it on I get B&N stock setup menu. Than after account sign in it gives me error message with device info.
I can boot on SD CWM, but when I try to flash any zip it aborts and also I can't seem to find the right CWM SD that leaves me enough room to copy the OS.zip on the SD.

[Q] NT 16GB always boot to Recovery Mode only

Hello,
I've searched many topics but still didn't work
My NT 16GB worked good till today. Today I want to flash a new ROM (CM10.1 rc5).
I though I made a mistake from here: from ROM Manager, I flashed the CWM to 6.0, but I might flash with Nook Color version :crying: and from this time, my NT is ALWAYS boot into recovery mode.
- I tried press Power and N button or 8 times fail reboots but it still boot into recovery
- I tried flash new ROM from sd card, and the status is shown Installing Update.... and then it shown Install from sd card completed!!! There was no any notification more (as usual). And after "completed" by this way, reboot and still went into recovery mode again
- I also tried flash new cwm version 6.0.x, wipe data, format system, data,.... and flash ROM again from sdcard but still didnt work.
- I also tried reset to factory default http://forum.xda-developers.com/showthread.php?t=1663836 but it still boot into CWM again and again.
- and follow many topics on google search but still no luck
please anyone can give me a hint, let me see the way to escape the recovery screen :crying::crying: thank you so much!
I want to flash a new ROM, a fresh tablet to make a gift for my dad on father's day, but it is brick :crying::crying::crying:
I think using ROM manager to flash recovery may not work with our device (I may be wrong) but we don't have an official build of CWM.
Regardless.... Do you have adb set up? If so, does it recognize your nt?
Sent with my Dinc4G
DavDoc said:
I think using ROM manager to flash recovery may not work with our device (I may be wrong) but we don't have an official build of CWM.
Regardless.... Do you have adb set up? If so, does it recognize your nt?
Sent with my Dinc4G
Click to expand...
Click to collapse
I have adb set up, but it doesn't recognize my NT , it always boot to recovery mode
Ok, no big deal yet. Lets try the following.
First you are going to need an extra SD card, one greater than 2G. Go to this thread http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14 and follow the instructions. This will give you the files and show you how to make a CWM bootable SD card (ignore all the steps about rooting your device in this thread for now). Note that this will repartition your SD card, so you will not be able to use is for much else unless you re-repartition it yourself.
To tell if this is successful or not, note the version of CWM you are now booting into, I am guessing it will be 6.0.3.1 (newest version) since you tried getting this from Rom Manager. If it is booting from SD card it should show up as version 5.0.x.x (I don't remember the exact version but it is older).
If you got it to boot from SD card then lets pull an updated version of CWM from this site http://goo.im/devs/succulent/acclaim/recovery The older version of CWM may not work well with CM10.1. try CWM 6.0.2.9, make sure you download the flashable CWM zip and not the image file.
OK now you will need to put this zip file onto your SD card - there should be just enough room left for it, or you could put it onto a 2nd SD card (easier) Note: while in recovery you can take the bootable SD card out of your NT. Go ahead and flash the CWM zip. You should now have a working recovery. At this point try flashing a ROM of your choice.
Good Luck
DavDoc said:
Ok, no big deal yet. Lets try the following.
First you are going to need an extra SD card, one greater than 2G. Go to this thread http://forum.xda-developers.com/showpost.php?p=21895025&postcount=14 and follow the instructions. This will give you the files and show you how to make a CWM bootable SD card (ignore all the steps about rooting your device in this thread for now). Note that this will repartition your SD card, so you will not be able to use is for much else unless you re-repartition it yourself.
To tell if this is successful or not, note the version of CWM you are now booting into, I am guessing it will be 6.0.3.1 (newest version) since you tried getting this from Rom Manager. If it is booting from SD card it should show up as version 5.0.x.x (I don't remember the exact version but it is older).
If you got it to boot from SD card then lets pull an updated version of CWM from this site http://goo.im/devs/succulent/acclaim/recovery The older version of CWM may not work well with CM10.1. try CWM 6.0.2.9, make sure you download the flashable CWM zip and not the image file.
OK now you will need to put this zip file onto your SD card - there should be just enough room left for it, or you could put it onto a 2nd SD card (easier) Note: while in recovery you can take the bootable SD card out of your NT. Go ahead and flash the CWM zip. You should now have a working recovery. At this point try flashing a ROM of your choice.
Good Luck
Click to expand...
Click to collapse
Hello DavDic,
Thank you for your help,
I follow your link and I success to boot from SD card, and CWM version is 5.0.5, then I success install the update.zip too, unfortunately after removing the sd card and reboot, it still boot to CWM version 6.0.2.9 - this is the version that I flash from ROM Manager before my NT is bricked (I flashed wrong device when I choose Nook Color in Rom Manager)
So I try to reboot again from sdcard, cwm version 5.0.5, then flash new CM10.1 ROM, and reboot and still go to CWM 6.0.2.9
and again, I boot from sdcard, cwm version 5.0.5, flash to new cwm version 6.0.2.9, flash new ROM and still boot to CWM screen
So, I can create and boot from a Sdcard, But can not boot to OS, always go to cwm 6.0.2.9 screen (that I think the wrong file since I flash from Nook Color file ). Thank you!
h a l t said:
Hello,
I've searched many topics but still didn't work
My NT 16GB worked good till today. Today I want to flash a new ROM (CM10.1 rc5).
I though I made a mistake from here: from ROM Manager, I flashed the CWM to 6.0, but I might flash with Nook Color version :crying: and from this time, my NT is ALWAYS boot into recovery mode.
...
please anyone can give me a hint, let me see the way to escape the recovery screen :crying::crying: thank you so much!
...
Click to expand...
Click to collapse
I think your problem most likely has to do with BCB/BootCnt not getting reset properly, as described at http://forum.xda-developers.com/showpost.php?p=21381141&postcount=1.
If so, the easiest way of resetting these files is to flash Succulent's flashable_fix_bootloop.zip at his repo http://goo.im/devs/succulent/acclaim/recovery.
digixmax said:
I think your problem most likely has to do with BCB/BootCnt not getting reset properly, as described at http://forum.xda-developers.com/showpost.php?p=21381141&postcount=1.
If so, the easiest way of resetting these files is to flash Succulent's flashable_fix_bootloop.zip at his repo http://goo.im/devs/succulent/acclaim/recovery.
Click to expand...
Click to collapse
Thank you, I did but no luck still boot to recovery mode
You need to try and get an adb connection. I assume you are running Windows, if not............
But, what happens when you plug your NT into your computer. Do either of your drives (Internal/external SD) show up in my computer?
DavDoc said:
You need to try and get an adb connection. I assume you are running Windows, if not............
But, what happens when you plug your NT into your computer. Do either of your drives (Internal/external SD) show up in my computer?
Click to expand...
Click to collapse
Both drives show up in my windows computer, but I can't read, "please insert a disk" error when I double click on drive,
I am trying this thread http://forum.xda-developers.com/showthread.php?t=1470910 and hope...
h a l t said:
Both drives show up in my windows computer, but I can't read, "please insert a disk" error when I double click on drive,
I am trying this thread http://forum.xda-developers.com/showthread.php?t=1470910 and hope...
Click to expand...
Click to collapse
You should have an adb connection then. Before you jump into the total wipe attempt, try getting an adb connection. Use this first and see if it works http://forum.xda-developers.com/showpost.php?p=36650082&postcount=171
You will need the driver files for this though, let me know if you don't have them.
DavDoc said:
You should have an adb connection then. Before you jump into the total wipe attempt, try getting an adb connection. Use this first and see if it works http://forum.xda-developers.com/showpost.php?p=36650082&postcount=171
You will need the driver files for this though, let me know if you don't have them.
Click to expand...
Click to collapse
Yes I have the driver files, on device manager it shown Android Phone ADB interface, something like this, and what is the next step please...
h a l t said:
Yes I have the driver files, on device manager it shown Android Phone ADB interface, something like this, and what is the next step please...
Click to expand...
Click to collapse
You should have adb access given what you just said.
Are you familiar with command prompts and adb commands?
DavDoc said:
You should have adb access given what you just said.
Are you familiar with command prompts and adb commands?
Click to expand...
Click to collapse
yes I have adb access from Dos, but don't know which command to fix my problem. Thanks so much for your patience, still googling
h a l t said:
yes I have adb access from Dos, but don't know which command to fix my problem. Thanks so much for your patience, still googling
Click to expand...
Click to collapse
Well this is a start at least.
I think Digixmax may be on to something though.
@digixmax, I am at work and don't have an NT in front of me, do you remember which partition the recovery is in. I wanted OP to see if those two files were even there. He may have gotten rid of them completely inadvertently.
DavDoc said:
Well this is a start at least.
I think Digixmax may be on to something though.
@digixmax, I am at work and don't have an NT in front of me, do you remember which partition the recovery is in. I wanted OP to see if those two files were even there. He may have gotten rid of them completely inadvertently.
Click to expand...
Click to collapse
F5, F5, ..... I see the light at the end of the tunnel,... God, what is the adb, shell command to help me escape this trouble :angel::angel:
DavDoc said:
Well this is a start at least.
I think Digixmax may be on to something though.
@digixmax, I am at work and don't have an NT in front of me, do you remember which partition the recovery is in. I wanted OP to see if those two files were even there. He may have gotten rid of them completely inadvertently.
Click to expand...
Click to collapse
These two files are in the /bootdata partition (see http://forum.xda-developers.com/showpost.php?p=37515697&postcount=31 for a list of the NT partitions and their content).
But if OP's flashing Succulent's flashable_fix_bootloop.zip (which basically re-install a fresh copy of these two files) didn't fix the problem then he might have wiped out some other critical components of the system.
I follow Adam's guide, unbrick my NT, and then flash new CM10.1 ROM perfectly.
Thank you again DavDoc and digixmax for helping me so much! :good:
Glad you got it working again
Sent with my Dinc4G

Categories

Resources