[Q] Help with reset - Sony Ericsson XPERIA X10 Mini

Good night. I'm trying to reset my phone via FlashTool, flashing a stock ROM. The result is finish loading correctly, but once you put on your PIN number and asked me 'how are you?', The launcher does not load at all. I can see the top bar and lower it. Even I get a warning 'Data traffic' and when I click on lets me enter the Network Operator menu but nothing more. I want to know how I can activate Debugging mode. I've trying to use the Sony PC Companion, but I always get the error 'can not install or initiate upgrade components ...'. Thanks for answering and help me. A greeting.

Solved
I've already solved. What happened was that blocked the bootloader with the app 's1tool'. That, in this mobile, blocks the SIM. I just had to re-use s1tool and re-lock bootloader. Anyway, thank you very much.

Related

unlocked bootloader and now no radio, quick question bout unlocker

few questions about using the unlocker, whilst using the qsd8250 _semc and qsd8250_setool2,
does the phone have to be in flash mode or just connected to pc via usb with usb debugging enabled??
also im gettin adb server is out of date killing...
*daemon started successfully*
getting that every second line or so, is that normal, also it completes the process up until the part where it reboots the phone, then on the pc it saying getting root rights and nothing happens from there???
any help greatly appreciated
follow the unlock instructions fully, if it worked you should lose the "sony" test that happens just after you power on. If not, look for the BL tool in dev section, this will make life easier.
And close flashtool when you do.
[email protected] said:
follow the unlock instructions fully, if it worked you should lose the "sony" test that happens just after you power on. If not, look for the BL tool in dev section, this will make life easier.
Click to expand...
Click to collapse
i was told the sony ericsson logo would only dissappear if i flashed a new ernel, so i did, now i have no signal, and ive tried to reset through seus done everything i can think of
[email protected] said:
i was told the sony ericsson logo would only dissappear if i flashed a new ernel, so i did, now i have no signal, and ive tried to reset through seus done everything i can think of
Click to expand...
Click to collapse
Did you unlock your phone by chance? A in sim unlock to use it on another network? If you did, then you will lose radio signal if it wasn't done with SETOOL.
Dark Nightmare said:
Did you unlock your phone by chance? A in sim unlock to use it on another network? If you did, then you will lose radio signal if it wasn't done with SETOOL.
Click to expand...
Click to collapse
i ran the test to mae sure i had semc certificate, which i did, so i proceeded with unlock
[email protected] said:
i ran the test to mae sure i had semc certificate, which i did, so i proceeded with unlock
Click to expand...
Click to collapse
After unlocking, you need to flash DoomLord's special custom kernel or sony's very own via flashtool. Could be that or simply flash backs stock and retry unlocking. Possibly failed.
well ive managed to get radio working again, had to go bac to 2.1, then a custom 2.2 rom so i could crash system server, then unlock bootloader again, so all is working now, but now i cant root for some reason
mods please close this thread now problem is solved

[Q] Xperia Mini Pro - bad behavior after Easy root toolkit

Hi!
I'm sorry if I posted in the wrong topic.
Yesterday I used this: (http://forum.xda-developers.com/showthread.php?t=1320350) to root my SE Xperia Mini Pro.
The rooting process was ok and afterwards the phone was rooted.
Then I wanted to connect the phone to my PC, but
- it was not recognized (the phone by the [any] PC) in media transfer mode
- there was no lock screen (except before SIM unlocking on start)
- can't receive or make calls (incoming and outgoing calls are "Disabled" and it can't be changed [asks for password, but says "Network or SIM card error"]), I tried another phone and calls work.
I used the unrooting script, but nothing changed.
Then I downloaded a firmware I found on this forum (SE FW: 4.0.A.2.368), the media transfer mode and the lock screen worked, but not the calls. After that I applied the T-Mobile 2.3.4 software from my PC, but it's still the same.
Could anyone please tell me what I have to do?
Thanks in advance.
I think flashing a firmware will restore a rooted phone to his original state...
Maybe it has something to do with unlocking the boot loader?
http://unlockbootloader.sonyericsson.com/
My experience is that,
no matter how you mess with your SK17
I.e. bad boot loader, unplug while flashing, Relock bootloader fail unbootable bootloader etc etc,
Wotan Server brings everything work again.
Run Wotan Server, press the Volume down button (or Up i forgot), connect the USB cable, follow step by step to flash the newest version firmware.
And there you go.
Then root your phone again.
Thats what I did for many times. No panic. Seems our phone would never brick. LOL
*Sorry for bad English. I am not EFL speaker.
RE : bad behavior after Easy root toolkit
me too.. but the problem is the problem is the GPS is not working..
when i use foursquare the GPS is detected as inactive
can someone tell me what's wrong with my phone?
*sorry for the spoiled english

[Q] strange brick after unsimlock, any solution to fully reinstall stock rom?

Hello guys,
after looking here a lot for improving my x10 (successfully, I love fxp ), I have my first problem, and it is a strange one.
I live in France, and a new carrier made very cool prices, so I decided to change carrier. But my previous carrier provider made its possible to not unsimlock my x10, so, when I went in holidays in Tunisia, I went to a shop where they are known to unlock phones, and they unsimlocked it, but they put an official 2.1 rom, but I couldn't go from cyanogen to stock 2.1... So I decided to install fxp.
I rooted the phone with flashtool, and tried to flash the phone, but it was stuck on se logo, so I used pc companion to install stock gingerbread, it installed. But when I power it on, it's not 2.3, it's still 2.1 ! I don't know what these tunisian did, but they ****ed up my phone T_T
when I start it with my sim, I can enter my pin code, and I only have the blue wallpaper of 2.1 and the top bar. I can't access to anything, the three buttons do not work (except when I put the usb cable, I can use the return button to quit the "charge or connect" menu and minimize the bar when it is fullscreen).
When I don't put the sim, I have the configuration menu, but when I press proceed, it says me to insert a sim card and reset, I can't do anything at this state.
Did anyone have the problem ?
celuiquichaussedu48 said:
Hello guys,
after looking here a lot for improving my x10 (successfully, I love fxp ), I have my first problem, and it is a strange one.
I live in France, and a new carrier made very cool prices, so I decided to change carrier. But my previous carrier provider made its possible to not unsimlock my x10, so, when I went in holidays in Tunisia, I went to a shop where they are known to unlock phones, and they unsimlocked it, but they put an official 2.1 rom, but I couldn't go from cyanogen to stock 2.1... So I decided to install fxp.
I rooted the phone with flashtool, and tried to flash the phone, but it was stuck on se logo, so I used pc companion to install stock gingerbread, it installed. But when I power it on, it's not 2.3, it's still 2.1 ! I don't know what these tunisian did, but they ****ed up my phone T_T
when I start it with my sim, I can enter my pin code, and I only have the blue wallpaper of 2.1 and the top bar. I can't access to anything, the three buttons do not work (except when I put the usb cable, I can use the return button to quit the "charge or connect" menu and minimize the bar when it is fullscreen).
When I don't put the sim, I have the configuration menu, but when I press proceed, it says me to insert a sim card and reset, I can't do anything at this state.
Did anyone have the problem ?
Click to expand...
Click to collapse
If those Tunisians know something, they are probably here on xda-developers forum ..
You have a thread for sim unlocking, and I think that there is a way to check if your phone is unlocked properly via s1tool or is it possible to unlock it..Go HERE
Thanks, for the simlock soft.
But how can I make it to boot properly (ie having acces to menus, icons and all)
Well, I tried s1tool, and it says that it is still locked, but I don't understand, I was able before trying the update to call with the new carrier oO
PS : is there a way to root/flash without enabling debugging ?
I do not know if I can post this, but I managed to do here.
Debranding a knife around 1.6 android and use the ITS to upgrade
http://www.portalandroid.org/comunidade/viewtopic.php?f=55&t=5399
celuiquichaussedu48 said:
Well, I tried s1tool, and it says that it is still locked, but I don't understand, I was able before trying the update to call with the new carrier oO
PS : is there a way to root/flash without enabling debugging ?
Click to expand...
Click to collapse
Well, HERE you can find everything you want for unlocking, downgrading, rooting..(a lot of links)..
Just take it easy and don't rush..It's a simple process, you just have to understand and follow everything they say..
Cheers
Well, I tried again to backup the stock rom with pc copanion, and it worked, and now it is unsimlocked xD

X10 mini pro useless.help!!!

Hi,
hope someone can help me.
I unlocked my phone using a program from a web. I guess it used omnius to do it. After that, I unlock the bootloader to install a new kernel using the msm7227_setool2.cmd option of SE Tweaker Tool. When I did it, I realized that the phone had lost signal so I couldn't use it. I read afterward something about losing sim unlock if doing this but it was to late.
I tried to restore it using seus but now I can only use not working sim cards. If I use a functional one, from my previous company or from the new one, it is showed on the top bar a symbol I guess means "impossible to read sim card" and the screen only shows the background image (I cannot use the phone even to listen to music).
I relock bootloader using RESTORE function on s1tool but it's still no use. If I try to install another rom like MiniCM7Pro V21, it gets stuck on the starting animation.
I thought of buying an IMEI unlock code so I looked for information and found that, under the service info menu, there is an option called "SIM lock" that shows the number of attemps you have to unlock your phone. I haven't tried any unlock code and the phone shows that I still have 5 chances to enter it but there is no [X] next to any of the lines shown and, for what I read, it is supposed to show it if you can unlock the phone.
I've been searching for information but all I can find about restoring lost signal is what I've already done.
Anyone knows what else I can do?
Thank you!

[Q] gingerdx 21b no network/sim card error

i have just installed gingerdx 21b and now i have no signal, can't make calls or send texts etc. its like it doesn't even read the simcard. has anyone had this problem before?
thanks,
andy
Yes, there are plenty of people who've had these problems before.
The problem was with unlocking your bootloader. If you read the tutorial properly, you would have known it could disable the radio-capabilities of your phone (GSM/3G).
Flash back to original firmware, using the repair option in PC Companion or SEUS and relock your bootloader, using the Restore-button in S1Tool.
In order to get your bootloader unlocked properly, get an EMMA/IMEI code from your provider, and try again.
this is the second time ive had to use seus now, not doing very well. do i still have to relock the bootloader if i use seus?
This time im just going to use flashtool to unlock it, how do i get/use an imei code?
cheers,
andy
Yes, SEUS does not lock the bootloader, so you will have to use S1Tool to do that, and hope your network comes back.
you can get an unlock-code from your network-provider, in order to enter it, you usually have to remove your simcard, put one from another provider in and the phone will ask for the code to be entered.
The provider will usually ask for some money for the code, although mine provides it for free after the initial contract-period.

Categories

Resources