hello
Im using only oficial roms but after updated to ICS cant figure out how to disable noise reduction permanently. when I was on GB used this trick http://forum.xda-developers.com/showpost.php?p=21074151&postcount=74 and it worked good but now cant find the string value on ICS phone.odex Roms
i also read this topic http://forum.xda-developers.com/showthread.php?p=21314046#post21314046 but dont want open the phone or use non official roms .
need some help please!
x625 said:
hello
Im using only oficial roms but after updated to ICS cant figure out how to disable noise reduction permanently. when I was on GB used this trick http://forum.xda-developers.com/showpost.php?p=21074151&postcount=74 and it worked good but now cant find the string value on ICS phone.odex Roms
i also read this topic http://forum.xda-developers.com/showthread.php?p=21314046#post21314046 but dont want open the phone or use non official roms .
need some help please!
Click to expand...
Click to collapse
Try searching that thread for the string "ICS". It's in there...
I know you said you don't want to open the phone, but I did the second topic you linked, and it's actually very easy, and NR now works great. Makes my end of the call much clearer.
thank you for quick reply
I tested the string 10 01 22 00 D6 from this post : http://forum.xda-developers.com/showpost.php?p=24898718&postcount=127 but hex editor cant find that too. I'm on LP7 official. and I also don't understand What is smali and how can i edit it like 4 last lines of that post.
thank you for your advise but still fear from opening my phone . prefer a non physical way!
thanks
Are you searching for a text string, or hex? Makes a difference.
You should be able to ignore the smali stuff. It's just another method.
thanks again for quick response.
the tutorial says that search in hex-value. but after your advise i searched again the file "phone.odex" from official 4.03 ICS LP7 for string "10 01 22 00 D6" in both hex and text but cant find anything again. no chance! Did you test it yourself? or maybe different Roms have different strings?? holy echo getting me mad!!
thanks for your time and sharing your knowledge but echo is still there!!
x625 said:
thanks again for quick response.
the tutorial says that search in hex-value. but after your advise i searched again the file "phone.odex" from official 4.03 ICS LP7 for string "10 01 22 00 D6" in both hex and text but cant find anything again. no chance! Did you test it yourself? or maybe different Roms have different strings?? holy echo getting me mad!!
thanks for your time and sharing your knowledge but echo is still there!!
Click to expand...
Click to collapse
According to this post take off "D6" from your search. And no, I haven't tried personally as I'm not on ics, and I solved my echo problem by the method of opening my phone.
ctomgee said:
According to this post take off "D6" from your search. And no, I haven't tried personally as I'm not on ics, and I solved my echo problem by the method of opening my phone.
Click to expand...
Click to collapse
problem solved!
thank you for your attention!
I am working on a fix at the application level that should work on all ROM's (including stock), if you are interested, please have a look and register your interest in this thread
Regards
Related
Greeting,
Does anyone know where i get vista start menu icon.. the icon looks nicer compare to windows type... Thanks in advance..
Here is a gif . vista_start. so with your little helpers you can make your own icons.
http://www.heisig-it.de/vista/images/vista_start.gif
dave.
asraf09 said:
Greeting,
Does anyone know where i get vista start menu icon.. the icon looks nicer compare to windows type... Thanks in advance..
Click to expand...
Click to collapse
Did you succeed in getting this done? Searched every single post for an answer, nothing. At least nothing for Windows Mobile 6.1 on my HTC Touch Pro.
Cheers
Hi mates,
I've seen a conversation about this subject on a thread some time ago.
Here is the link of that thread:
http://forum.xda-developers.com/showthread.php?t=449283&page=9
The conversation begins on page 7 and 8 but the answer and a link to another thread about icons is on the page 9. That link is here:
http://forum.xda-developers.com/showthread.php?t=426264
Give a try to look there..
atakatas said:
Hi mates,
I've seen a conversation about this subject on a thread some time ago.
Here is the link of that thread:
http://forum.xda-developers.com/showthread.php?t=449283&page=9
The conversation begins on page 7 and 8 but the answer and a link to another thread about icons is on the page 9. That link is here:
http://forum.xda-developers.com/showthread.php?t=426264
Give a try to look there..
Click to expand...
Click to collapse
Dude, i've been searching for this and viewed around a thousand posts, no find. And only today, i found the link you posted above "http://forum.xda-developers.com/showthread.php?t=426264". What a luck. Thank you VERY MUCH though, i ddn't know which pages to exactly go to, so here, you helped me a lot
Cheeers
so, i am very happy for you..
i hope you can manage to create or change your icons the way you want.
good luck!
atakatas said:
so, i am very happy for you..
i hope you can manage to create or change your icons the way you want.
good luck!
Click to expand...
Click to collapse
Again, thank you
One more question though (since you're online), when i am doing changes on manilla files and those shell DLLs and so on, am i playing with the original ROM?
In other words, i want to play with my mobile as i wish, but when i choose to do factory defaults, i want it all to be gone and do things from scratch, is that too late for me? Am i already playing with the factory ROM?
Cheers Kardash
I don't know what you do exactly but if you use and run some applications like rom upgrade utility (RUU) probably u are changing or already have changed the original one.
Don't be concern with it, no problem i think, there are so many modified WM6/6.1roms here and there is also official WM5 rom you can easily find.
Kardash (kardeş) means "brother" in Turkish, did you mean this? if so, how do you now?
Regards,
atakatas said:
I don't know what you do exactly but if you use and run some applications like rom upgrade utility (RUU) probably u are changing or already have changed the original one.
Don't be concern with it, no problem i think, there are so many modified WM6/6.1roms here and there is also official WM5 rom you can easily find.
Kardash (kardeş) means "brother" in Turkish, did you mean this? if so, how do you now?
Regards,
Click to expand...
Click to collapse
Thanks for your reply, as for the ROM, well, i did not run any utilities, but i am overwriting manila files and dlls, and when i do so, i get a message from Resco Exporer telling me that i am modifying the ROM, so that freaked me out, i do not wanna loose the official rom on my HTC Touch Pro. As for Kardash (Kardeş), well, i once visited turkey, it was lovely, and i learnt this word there Then when i saw that ur from Turkey
Cheers
Hi all,
I have been looking around for long time and trying different solutions to add Arabic (BIDI or RTL) support to my vibrant but with no luck.the only thing is just adding the font so instead of showing squares it shows the letters but disconnected and in reverse order.
Have any one been successful in porting the language support from the i9000 middle eastern rom? I tried but my phone will not boot and I don't know how to access the log at that stage to see why or what is missing.
Do we have a better built in support in froyo? Or it is the same?
I have seen many threads in many forums but most are not active for long time.
Any help will be appreciated.
Sent from my SGH-T959 using XDA App
I managed to make an arabic 2.1 rom. Everything works fine with exception of GPS. Just do not know how to create a flashable zip file for the rom to post it.
arahma said:
I managed to make an arabic 2.1 rom. Everything works fine with exception of GPS. Just do not know how to create a flashable zip file for the rom to post it.
Click to expand...
Click to collapse
How did you do it?
Where did you get the files from? or you compiled your own?
Is it working now right-to-left and reshaping?
I would appreciate your help.
I am running now BIONIX1.6 rom (based on T959UVJI6). what is yours?
I have made a nandroid backup file. I can put it in online.
arahma said:
I have made a nandroid backup file. I can put it in online.
Click to expand...
Click to collapse
Please do i would greatly appreciate it ill even try to make an update from it. My friend would call you a life saver
i need hebrew support for this device 2 im using bionix 1.7 there is a script for fixing the framework.jar but after use with it the phone wont load the homescreen
arahma said:
I have made a nandroid backup file. I can put it in online.
Click to expand...
Click to collapse
That will be awesome, but would you also provide more details about what ROM you are running and what have you done and where did get the update files from.
oror494 said:
i need hebrew support for this device 2 im using bionix 1.7 there is a script for fixing the framework.jar but after use with it the phone wont load the homescreen
Click to expand...
Click to collapse
Can you provide us with that script or show where to get it from? maybe we can update it to work with the new rom.
There is an update rom running froyo 2.2 for Orange (I9000JHJP4) and has support for Arabic and hebrew, i tried to get some files from it to my 2.1 but did not work, i know i am missing more files that should be also integrated. that rom is for the international Galaxy S i9000 so it might not work with Vibrant
you can find the rom at samfirmware.com
windows
http://dl.dropbox.com/u/9085803/Hebrew 0.7/hebfix_script_0.71_win.zip
mac /linux
http://dl.dropbox.com/u/9085803/Hebrew 0.6/hebfix_script_0.64.zip
credit: classicaldude
oror494 said:
windows
http://dl.dropbox.com/u/9085803/Hebrew 0.7/hebfix_script_0.71_win.zip
mac /linux
http://dl.dropbox.com/u/9085803/Hebrew 0.6/hebfix_script_0.64.zip
credit: classicaldude
Click to expand...
Click to collapse
Thanks, i will see if i can fix or update this script. By the way what happens when you run it now? do you get an error or what?
fduraibi said:
Thanks, i will see if i can fix or update this script. By the way what happens when you run it now? do you get an error or what?
Click to expand...
Click to collapse
http://www.multiupload.com/ZBK8NCMTDF
this is the log txt
oror494 said:
http://www.multiupload.com/ZBK8NCMTDF
this is the log txt
Click to expand...
Click to collapse
I tested this patch without any changes and got the same error
I am trying to understand this java disassembled code to be able to fix it for the new ROM.
The patch already cover the full range of unicode characters for hebrew and arabic + other rtl languages.
Can anyone help me with generally understanding the disassembled code or provide links to some resources that can help?
Sent from my SGH-T959 using XDA App
any luck?
.
oror494 said:
any luck?
.
Click to expand...
Click to collapse
nope
there is a lot of line reference shift and i am not sure what or where are these reference and how can i update the new code based on these values.
oror494 said:
any luck?
.
Click to expand...
Click to collapse
Look at this thread, one guy is trying the same thing and he is getting the same error, and i think he got a work around in a hebrew site which i could not understand so you might find the solution to your problem there http://iandroid.co.il/forum/topic5657.html but for me I still need the Arabic character reshaping so RTL alone is not enough
And this is the link to the XDA thread where they discuss the same issues, and it seems that they are about to integrate the BIDI solution into the AOSP and CM
http://forum.xda-developers.com/showthread.php?t=701281
Request senior members to help
Hi Guy's,
A similar thread was opened by a forum moderator in another forum so i have contacted Pilot and going to give it a try.
The aim is to help newbies/beginners/anybody by answering any questions/issues they have in this thread, they can ask what ever they want no matter what rom/kernel or anything else they are having difficulty with, a place where they feel no threat for asking such questions.
The thread is to be run by not me but all senior members who are willing to help, the aim is to clear the Dev threads of all the unnecessary questions that are becoming more frequent and making it harder and harder to follow rom development.
For those seeking help, always try and help yourself first, most things can be found here..
http://forum.xda-developers.com/showthread.php?t=678513
If you feel you still need help then fire away, hopefully somebody will have answers for you, please keep questions related to roms in develpopment not stock roms but will cover everything from adb to wlod's.
Please, if you have been helped in anyway by members do not forget to leave thanks.
As usual any new question threads started and not aimed here will be removed by the moderators so please lets keep our development forum clean.
Can i just add that a lot of questions are being asked that can be found in the sticky's, please read those first as most things are covered there.
Thanks guy's for you help.
good idea!
well lets start a little something off then..
1) is there a way to implement voltage control on startup without the need of an app? if so, how?
2) i cant seem to change boot animation. tried changing bootanimation in the normal system/media folder & data/local folder via xrecovery install custom zip file.. any ideas?
thank you!
Awesome idea mate!!
Now anyone can ask questions without creating a new thread or getting burnt!!
@topic: dunno why but my CPU spy seems not to be working, fc'ing all the time even after rebooted. I am on DooM's 3b kernel using J's ROM.
Thank you!!
Warm Regards
kLouD
Sent from my x10i on CM7 custom dk kernel via xda premium app.
Mobzter said:
good idea!
well lets start a little something off then..
1) is there a way to implement voltage control on startup without the need of an app? if so, how?
2) i cant seem to change boot animation. tried changing bootanimation in the normal system/media folder & data/local folder via xrecovery install custom zip file.. any ideas?
thank you!
Click to expand...
Click to collapse
well i got some idea with the bootanimation thing , like the bootanimation.zip file which u want to use .. jus copy it into the system/media folder when it asks for overwrite jus do it no need to flash it ..i did it on Wolf's Rom and it worked flawlessly for me ..hope it works for u too!!
thank me if it helped u !!
kloud_ said:
Awesome idea mate!!
Now anyone can ask questions without creating a new thread or getting burnt!!
@topic: dunno why but my CPU spy seems not to be working, fc'ing all the time even after rebooted. I am on DooM's 3b kernel using J's ROM.
Thank you!!
Warm Regards
kLouD
Sent from my x10i on CM7 custom dk kernel via xda premium app.
Click to expand...
Click to collapse
dude like even i had this problem , on Ericks Rom ..coz i used to update the patchs released by him on top of another and another .... like i used to follow the steps as mentioned by Erick .. but still i used to get FC's .. so what i did is once i flashed the full ROM (cleared everythin) and flashed the latest Patch and voila !! my cpu Spy started working again .. i think that problem comes when we try to update once patch on top of another and so on ...
jus gave my opinion !!
hope it helps you !!
thank me if it did !!
acerulz said:
dude like even i had this problem , on Ericks Rom ..coz i used to update the patchs released by him on top of another and another .... like i used to follow the steps as mentioned by Erick .. but still i used to get FC's .. so what i did is once i flashed the full ROM (cleared everythin) and flashed the latest Patch and voila !! my cpu Spy started working again .. i think that problem comes when we try to update once patch on top of another and so on ...
jus gave my opinion !!
hope it helps you !!
thank me if it did !!
Click to expand...
Click to collapse
Ah! Yes, now that you mention it, Thanks for reminding me. I forgot to make a clean install. Will do so now!!
Thanks once again.
Warm Regards,
kLouD
Sent from my x10i on CM7 custom dk kernel via xda premium app.
GOOD IDEA!
Very good idea, I also think this should be sticky.
But:
It should have a better thread name like:
Questions regarding roms FCs/Errors/Reboots/WLODs go HERE!
Or something that could let extremely clear that if they want to ask something that are not directly a development(but regarding it) should go in here.
Another but, rsrsrs:
The thread should remain only about roms that are developed in here, anything regarding original SE rom, unless tweaked and posted in this area should go to Q&A.
You deserve a thanks!
acerulz said:
well i got some idea with the bootanimation thing , like the bootanimation.zip file which u want to use .. jus copy it into the system/media folder when it asks for overwrite jus do it no need to flash it ..i did it on Wolf's Rom and it worked flawlessly for me ..hope it works for u too!!
thank me if it helped u !!
Click to expand...
Click to collapse
was going to try it after i updated my rom files and weirdly enough it just started to work. appreciate the help though!
TheRuan said:
Very good idea, I also think this should be sticky.
But:
It should have a better thread name like:
Questions regarding roms FCs/Errors/Reboots/WLODs go HERE!
Or something that could let extremely clear that if they want to ask something that are not directly a development(but regarding it) should go in here.
Another but, rsrsrs:
The thread should remain only about roms that are developed in here, anything regarding original SE rom, unless tweaked and posted in this area should go to Q&A.
You deserve a thanks!
Click to expand...
Click to collapse
Thanks for the support buddy and the thanks.
I did wonder about the name, maybe something clearer is needed, will see how it goes but thanks for the advice.
Your other point is valid but it would be better if we do not put restrictions on what can be asked in the op as it defeats the whole idea of the thread.
I think that you should also have a set layout for each problem that way it's easier for people to understand what's going on and it's also easier for other people with the same problem to search
Just a thought
yournameshouldbehere said:
I think that you should also have a set layout for each problem that way it's easier for people to understand what's going on and it's also easier for other people with the same problem to search
Just a thought
Click to expand...
Click to collapse
Hopefully buddy if the question has been answered before they will learn to use the thread search function.
smartgardens said:
Thanks for the support buddy and the thanks.
I did wonder about the name, maybe something clearer is needed, will see how it goes but thanks for the advice.
Your other point is valid but it would be better if we do not put restrictions on what can be asked in the op as it defeats the whole idea of the thread.
Click to expand...
Click to collapse
No, I mean, no restrictions at all should be done when they question, it should be more like advises, something like:
inside the thread > First post:
You can ask/question anything in here but keep in mind this is guided for ROM developed in xda not for stock roms.
Questions regarding stock rom may be question on Q&A if not already answer that, if you have doubts regarding the best place you can try here no problems with that.
The only request for the thread should be that the questions must be related some how to errors/failures/wlods after using some apps or tweak, requests, doubts regarding new stuff.
As stock doubt like:
Does x10 flash led works good? should i buy a x10? rsrsrsrs
With time a FAQ can be added to the first post to keep the thread clean and be even more helpful to newbies.
Mobzter said:
2) i cant seem to change boot animation. tried changing bootanimation in the normal system/media folder & data/local folder via xrecovery install custom zip file.. any ideas?
Click to expand...
Click to collapse
If you made your own Bootanim make sure the zip is uncompressed (ie the files were added with "store" as the compresion other wise it will no worky
then just like @acerulz said adb push or copy it over the excisting one @ system/media/
Pvy.
well i am using stock 2.3.3 rom (not rooted)
now my Questionis are
1) any other 2.3.3 rom will all function working(most of other roms are not having teathering or wifi working perfecly)
2) i am not getting Background sound while playing game like Asphalt5 or AVATAR.
can any one provide me solution for both question.
thank you
watting for Quick Reply ....
chauhanjayc said:
well i am using stock 2.3.3 rom (not rooted)
now my Questionis are
1) any other 2.3.3 rom will all function working(most of other roms are not having teathering or wifi working perfecly)
2) i am not getting Background sound while playing game like Asphalt5 or AVATAR.
can any one provide me solution for both question.
thank you
watting for Quick Reply ....
Click to expand...
Click to collapse
Hi Buddy,
As your issues you are saying with the games are to do with stock then i do not think anybody here can help you, ask in the Q&A forum see if anybody is having the same problem.
With the wifi, all the roms i know of are fully working, read through some threads and see which rom you would like, it is your personal choice but which ever one you choose there will always be updates to iron out any problems if there are any.
Mac address change
I have a question/request:
How do we change Mac address?
That it is possible I'm sure it is, the problem is that the maximum I could do was to change it for some time(until the adapter was turned off and on again.
I need this to be able to use it on my job as I have only the right to have one mac address.
Being able to use communicator at the office would be very nice, as for now i have to carry the laptop around.
Sometime ago I've tried to question this in Q&A but got no good answer/no help
[Q] X10 Mac Address Change/Spoof How to?
In there I was guided to check this:
Changing(spoofing) MAC address
If someone could help me on this?
In my opinion this would be something that could even become a new option in all roms if the Devs that have knowledge to make it happen like it.
Thanks in advance!
hey devs..
nice to have this most wanted thread..
can any one update me with the upgradation of the current WB 4.0.4 rom stock kernel like 4.1 and so on..
thanks in advance..
bhupengaitonde said:
hey devs..
nice to have this most wanted thread..
can any one update me with the upgradation of the current WB 4.0.4 rom stock kernel like 4.1 and so on..
thanks in advance..
Click to expand...
Click to collapse
Hi Buddy,
What exactly do you want to know, what rom are you using now, are you already on wolfs rom?
colossus said:
Hi Buddy,
What exactly do you want to know, what rom are you using now, are you already on wolfs rom?
Click to expand...
Click to collapse
hey dude..
i am presently on WB 4.0.4 stock rom. it sometimes is laggy.. not always.. i was bit curious abt the new version where this beautiful rom is even enhanced..
damn this rom is awsome.. battery is also reasonably consumed..
upgradation is definitely awaited and appreciated..
thanks in advance..
Hi guys,
I'm new to modifying Android's roms and here is my problem.. I bought a used SE x10 which has 2.1 firmware.. I heard about 2.3.3 official SE update and went to there website, backed up my data, opened my PC companion to update but it surprised me to keep telling me that my phone is "already up to date"!!
I asked about that and someone told me if the guy who used the phone before me did install a custom rom to my phone before, official ways to update my phone wont work..
so please help and advise me.. either by giving me a solution to that, or to give me a link where i can find answers for my questions..
thank you in advance for your support..
my device info found at "about phone":
Model number: X10a
Firmware version: 2.1-update1
Baseband ver.: 2.1.54
Kernel ver.: 2.6.29
Build number: 2.1.A.0.435
like the title
im having difficulties in adding the sound file into my animation
can anyone help out?
btw the file attached
it consists of pictures, sound file(in OGG and mp3 format) just in case
Sound at boot is a sound file type OGG for ICS or WAV for GB located in System/Etc as POWERON file .
jje
can anyone type the whole address and file name for me
btw im using rooted, flashed to 4.0.4 with 1.9.1 rom control
lamfe1991 said:
can anyone type the whole address and file name for me
btw im using rooted, flashed to 4.0.4 with 1.9.1 rom control
Click to expand...
Click to collapse
JJEgan told you what you needed to know...
/system/etc/PowerOn.ogg
So rename your .ogg file to PowerOn.ogg, and put in in /system/etc.
Though, some custom ROMs don't appear to support boot sounds. Since you say you're on 4.0.4, I have to assume you're on a custom ROM, since Samsung has only released up to 4.0.3 in terms of Samsung stock firmwares.
Thx for ur advice
I follow exact the same as u guys advise but its not working
From the very beginning, it has no boot sound at all after i rooted and flashed. Would that differ the settings?
lamfe1991 said:
Thx for ur advice
I follow exact the same as u guys advise but its not working
From the very beginning, it has no boot sound at all after i rooted and flashed. Would that differ the settings?
Click to expand...
Click to collapse
Try re-reading the last paragraph of my last post.
so im dead man any recommended ROM that supports boot sound?
lamfe1991 said:
so im dead man any recommended ROM that supports boot sound?
Click to expand...
Click to collapse
Not from me. I don't recommend ROMs, because that always leads to a "what's the best ROM" debate, which usually ends up getting the thread locked.
(refer to this)
If you want a guarantee that boot sound will work, then flash back to stock.
Might be worth converting to OGG rather than renaming . Might be worth reading the faq for whatever rom you use.
jje
lamfe1991 said:
can anyone type the whole address and file name for me
btw im using rooted, flashed to 4.0.4 with 1.9.1 rom control
Click to expand...
Click to collapse
i donno when u guys will learn how 2 post with relavent stats like which custom/stock rom ur into its ver the kernel ur using etc at least u can put the same in ur signature so that people find it easy 2 resolve ur issue please edit ur op properly with all this first and remember the same when u post next
ps: if ur using a latest AOKP base rom like rr v1.9.1 then boot sound is not there and even if u put the same in ur bootanimation.zip it will not wrk
Sun90 said:
i donno when u guys will learn how 2 post with relavent stats like which custom/stock rom ur into its ver the kernel ur using etc at least u can put the same in ur signature so that people find it easy 2 resolve ur issue please edit ur op properly with all this first and remember the same when u post next
ps: if ur using a latest AOKP base rom like rr v1.9.1 then boot sound is not there and even if u put the same in ur bootanimation.zip it will not wrk
Click to expand...
Click to collapse
Agree difficult to work out an answer in fact nearly as difficult as reading your post in mangled Engrish .
jje
sorry jje but this forum in not only for perfect english talking guys - see my broken english - i´m german but i understand what is talking here
regards
mekoa8 said:
sorry jje but this forum in not only for perfect english talking guys - see my broken english - i´m german but i understand what is talking here
regards
Click to expand...
Click to collapse
I don't think he's talking about broken English, exactly. More the insistence of some members to type "English" (some call it "text talk") like:
u = you
ur = your (or sometimes you're)
wat = what
don = don't
2 = to (or sometimes too)
wrk = work
eva = ever
abt = about
neva = never
wiv = with
kno = know
and so on, and so forth.
I personally find this really irritating, (but nonetheless, I can still generally read it) and I know that many other members who can manage to decipher it feel much the same way... but to many non-native English speakers, it makes it especially hard. Plus, it makes it so the bulk of posts that are comprised of such nonsense will not run through Google Translate, so any non-English speakers who don't speak or read any English at all, REALLY won't understand.
So even though people who post in such a manner may be trying to be helpful, it sometimes ends up being counter-productive.
Edit to add: This is just my opinion, by the way... I'm not trying to flame, or say that Sun90 wasn't being helpful - he was, and he by far is NOT the worst perpetrator I've seen doing "text talk"; I'm just saying that some don't seem to consider how difficult it can be for non-English speakers when they post using "text talk" or use abbreviations, or even slang that could be common to a specific country or region.
ctomgee said:
I don't think he's talking about broken English, exactly. More the insistence of some members to type "English" (some call it "text talk") like:
u = you
ur = your (or sometimes you're)
wat = what
don = don't
2 = to (or sometimes too)
wrk = work
eva = ever
abt = about
neva = never
wiv = with
kno = know
and so on, and so forth.
I personally find this really irritating, (but nonetheless, I can still generally read it) and I know that many other members who can manage to decipher it feel much the same way... but to many non-native English speakers, it makes it especially hard. Plus, it makes it so the bulk of posts that are comprised of such nonsense will not run through Google Translate, so any non-English speakers who don't speak or read any English at all, REALLY won't understand.
So even though people who post in such a manner may be trying to be helpful, it sometimes ends up being counter-productive.
Edit to add: This is just my opinion, by the way... I'm not trying to flame, or say that Sun90 wasn't being helpful - he was, and he by far is NOT the worst perpetrator I've seen doing "text talk"; I'm just saying that some don't seem to consider how difficult it can be for non-English speakers when they post using "text talk" or use abbreviations, or even slang that could be common to a specific country or region.
Click to expand...
Click to collapse
hey sorry for the same mate will be more specfic with my words next time so that it will not trouble people in any way
is there any tutorial about xml editing here ? I googled before but nothing
I mean what could be edited and what could be created...
Thanks !
kokzhanjia said:
is there any tutorial about xml editing here ? I googled before but nothing
I mean what could be edited and what could be created...
Thanks !
Click to expand...
Click to collapse
Xmls are usually in simple english with tags like html(though it has no relation with html.I wanted to mean for eg like <preference> </preference> ) if you read the lines you can understand I guess
Sent from my GT-N7000 using xda app-developers app
kokzhanjia said:
is there any tutorial about xml editing here ? I googled before but nothing
I mean what could be edited and what could be created...
Thanks !
Click to expand...
Click to collapse
Or use something like Eclipse where u have also a Visual way to "program" where u drag and drop object in the screen
deniel said:
Or use something like Eclipse where u have also a Visual way to "program" where u drag and drop object in the screen
Click to expand...
Click to collapse
How can i open the program for the visual ? I downloaded it but i cant find anyway...
Sent from my WT19i
kokzhanjia said:
How can i open the program for the visual ? I downloaded it but i cant find anyway...
Sent from my WT19i
Click to expand...
Click to collapse
The visual portion in Eclipse is for layout xml files. If your xml is just a plain xml it will not do anything for you visually.
What exactly are you trying do?
Use Google to find tutorials about xml file creation. A simple defined search such as "android xml tutorial" returns quite a bit of info.
blazingwolf said:
The visual portion in Eclipse is for layout xml files. If your xml is just a plain xml it will not do anything for you visually.
What exactly are you trying do?
Use Google to find tutorials about xml file creation. A simple defined search such as "android xml tutorial" returns quite a bit of info.
Click to expand...
Click to collapse
Well im trying to build a systemui. And i know i can pnly build it from scratch.
But the trouble im facing is i cant even start a project related to what i want to do..
I read and search for tutorials beyond tutorials but still cant find anything anout opening a window to do that.
Just some tutorials stating that what relative layout and linear layouts and some about how to add features related.
Havent looked into videos though. Because what i saw at the first page of google was about how to install adt plugin.
So the main problem im facing now is, could anyone give me some tips or guides to open a window to start my next phase of learning
I hereby support an OFF-Topic thread.
kokzhanjia said:
Well im trying to build a systemui. And i know i can pnly build it from scratch.
But the trouble im facing is i cant even start a project related to what i want to do..
I read and search for tutorials beyond tutorials but still cant find anything anout opening a window to do that.
Just some tutorials stating that what relative layout and linear layouts and some about how to add features related.
Havent looked into videos though. Because what i saw at the first page of google was about how to install adt plugin.
So the main problem im facing now is, could anyone give me some tips or guides to open a window to start my next phase of learning
I hereby support an OFF-Topic thread.
Click to expand...
Click to collapse
I'm going to assume, probably a bad idea (lol), that you mean for a sony device as that is what is in your signature. Why not pull apart an existing systmeui from that device and go through it to see what stuff is doing? Then you can create what you want.
Here is a link for a tutorial about a Sense device but the basic idea is similar for all devices just the procedure might be a little different. http://forum.xda-developers.com/showthread.php?t=1453869
Also, in this forum are threads on decompiling the systemui.apk.
kokzhanjia said:
is there any tutorial about xml editing here ? I googled before but nothing
I mean what could be edited and what could be created...
Thanks !
Click to expand...
Click to collapse
Refer this website (http://www.w3schools.com/xml/) to get a basic idea of XML.
blazingwolf said:
I'm going to assume, probably a bad idea (lol), that you mean for a sony device as that is what is in your signature. Why not pull apart an existing systmeui from that device and go through it to see what stuff is doing? Then you can create what you want.
Here is a link for a tutorial about a Sense device but the basic idea is similar for all devices just the procedure might be a little different. http://forum.xda-developers.com/showthread.php?t=1453869
Also, in this forum are threads on decompiling the systemui.apk.
Click to expand...
Click to collapse
I understand decompiling but i cant even open the window to start a normal xml project in esclipse
I hereby support an OFF-Topic thread.