Running FXP116 CM9 on my WT19i
Just wondering why it didnt had the CRT off animation compared to the AOSP minicmsandwich..
If there's a way for me to copy the files for that part and put it on FXP116 CM9 rom.. Any suggestions?
I've got the ROMs for Hybroman v16 and the minicmsandwich R3, I just dont know where & what files its under to make it have the CRT off animation effect
okay i think i've figured it out a little. searched online and read something about a "libsurfaceflinger.so" file which contains the crt off animation.. i saw the same file inside the custom roms i've used which had the crt off animation. im just not sure if it'll work for some ICS roms.. wish me luck
Were you able to make this work on an ICS rom?
Sent from my WT19i using XDA
never got it to work on the FXP116 CM9..
i read on some posts that on most custom roms it'll just cause a bootloop.
for stock roms it actually works fine.
tried extracting files from several roms which had the crt off animation, and followed the right CWM zip templates.. but i am still unsuccessful
i also applied it on the Official Sony ICS 4.1.A.0.562, also doing the bootloop
Thanks for trying. Maybe you should pm kamarush and ask him how he did it in minicm
Sent from my WT19i using XDA
melander said:
Thanks for trying. Maybe you should pm kamarush and ask him how he did it in minicm
Sent from my WT19i using XDA
Click to expand...
Click to collapse
yeah i think thats a good idea. ill also try asking lasan, since his latest MIUI release already has the CRT-off animation effect. MIUI Project RC1 2.4.13
its based from FXP, maybe ill try getting the files from his work and combine it with FXP116 CM9 rom. ill make backups first before i do this.
Related
Hello People of XDA!
You may have seen this ROM before, but the ports have been messy with files that our device does not use. I have rebuilt this ROM myself using FXP125 Base ROM and the latest JoyOs 1.2.2
During my porting adventure, I ran into alot of problems getting things to work. But after about 20 fresh installs, I managed to get a fully working clean ROM.
The ROM however has one issue. The two lights between the bottom buttons do not work. I don't know why, maybe one of you could shed some light on the subject.
I have NOT Kanged this release BUT feel free to modify and distribute better versions, after all it is open source
Link to download: http://www.mediafire.com/?2dw7h70s2l1u4pe (66.12MB)
Install Procedure: Unlocked Bootloader Only
*Use the backup/restore feature in CWM Recovery to avoid loss of data.
1. Download Ckernel CM7 from here: http://forum.xda-developers.com/showpost.php?p=26638116&postcount=51
*Credit lies with Championswimmer for the Kernel
2. Download this ROM & copy to your SDCard
3. Flash Ckernel CM7 using Flashtools (will add links later)
4. Boot into Recovery and format dalvik cache, cache, data & system
5. Install .zip using CWM Recovery
6. Reboot device and wait for cache to rebuild
7. Do a second reboot for all apps to display. (torch, filemanager)
8. Enjoy
I will probably try and port other ROM's if requests are made.
PLEASE READ OP BEFORE ADDING NOOB COMMENTS. If you dont know how to flash a Kernel or unlock your bootloader, search the forum because its all there.
Bugs
-no hw LED's
-low fps recording on video camera. Photo camera works perfect with auto-focus
-waiting for reports by testers
Thank you for trying my version of this ROM.
NEW KITCHEN!!! Introducing... The Port Hub
I have made my own little basic kitchen to help port roms. If you like porting roms, this maybe useful to you.
http://www.mediafire.com/?31r3wz0z35sgwg4
You dont even need to download base rom, files have been included from FXP125 base, just put your port in the PORT folder and use the One click.bat
If it does not zip the rom, install 7zip before zipping!
Can you port meizu os??
sent from my oodie powered x10i spaceship
1eyedmonster said:
Can you port meizu os??
sent from my oodie powered x10i spaceship
Click to expand...
Click to collapse
Im sorry but I cannot make a port of meizu (flymeOs) because it is based on android 4.0. I am unfamiliar with the 4.0 base at this time. Sorry
can we use doomkernal?
simant said:
can we use doomkernal?
Click to expand...
Click to collapse
nope you cnt use ,use FXP kernel or posted kCernel (link) in OP.. :good:
I am not sure, try it! but make sure to flash wifi modules. Otherwise, try CKernel, it is one of the best kernels.
legzd2010 said:
I am not sure, try it! but make sure to flash wifi modules. Otherwise, try CKernel, it is one of the best kernels.
Click to expand...
Click to collapse
I guess doom kernels are best for stock based rom,those are not for FXP..correct me if i am wrong
angelnaina said:
I guess doom kernels are best for stock based rom,those are not for FXP..correct me if i am wrong
Click to expand...
Click to collapse
I used DoomKernel a while ago, but now to me it feels outdated so I use Ckernel. But DoomLords Kernel is very stable and it may run on this version but I cannot say that I have tried it. but yes, as I am using a FXP base, an FXP based Kernel is needed
Just installed it and soo far soo good I would love to see lewa OS port from you, thx for this rom, smooth and fast, so far no bugs found.
motoman992 said:
Just installed it and soo far soo good I would love to see lewa OS port from you, thx for this rom, smooth and fast, so far no bugs found.
Click to expand...
Click to collapse
Thanks for trying my Rom. I have made a port from lewa earlier today, but there is a bug with the lockscreen resolution. but I will release when this is fixed as everything else works
I have also ported MIUI today and its nice and smooth without any modifications, so a couple of tweeks and I will upload that too
Great news, this joy rom is fasta and everything but i really dont like its UI so i cant wait to change it with your lewa
can u upload Screen Shot ? =.=
Meizu m9 2.3 gb this has already been ported to the htc evo so can it be ported to Ours????
http://www.mediafire.com/?96q6n37nnh2bsoy
Sent from my oodie powered x10i spaceship
can ul port it to locked bl?
i am trying to port JB from AOSP....
i got in boot loop .. i think that it might be a kernel issue... any one here who can compile or modify CM9 kernel to boot JB on Atrix 4G...
i dont have more knowledge of programing but i try all kernel for atrix ..all failed any one can compile it ???
wow...
i hope u can find stable kernel for JB and make it real for atrix JB......
did u try CM9 jokersax kernel before??
ghaf85 said:
wow...
i hope u can find stable kernel for JB and make it real for atrix JB......
did u try CM9 jokersax kernel before??
Click to expand...
Click to collapse
yes i try it ... i try all available kernel
I think we need wait Joker's JB , then You may port JB AOSP.
gofgalaxy said:
I think we need wait Joker's JB , then You may port JB AOSP.
Click to expand...
Click to collapse
CM9 kernel works on some device with some modification ... but i am noob at programing so i dont know how to make patch for kernel...
Maybe you can ask here:
http://forum.xda-developers.com/showthread.php?t=1739561
Hope it helps.
Sent from my MB860 using xda app-developers app
[Q] What is Diffident between MIUI ROM and Other ROM (CM9 CM10) ?
Sorry for my noob question, but i really confuse .
Thanks...
kbit013 said:
[Q] What is Diffident between MIUI ROM and Other ROM (CM9 CM10) ?
Sorry for my noob question, but i really confuse .
Thanks...
Click to expand...
Click to collapse
CM9 and CM10 look and work like original android. (ICS and JB respectively)
MIUI rewrote just about the entire user-interface and several of the standard apps to give a different user-experience, but MIUI itself is built on top of Android.
If you've tried CM9 or 10, then there's no harm in trying out a MIUI rom either and see how you like it.
If you make a backup in CWM first you have your phone back working like it is now by just doing a restore.
MIUI v4 ROMS are based on ICS so you use them with the nAa ICS kernel.
SmG67 said:
CM9 and CM10 look and work like original android. (ICS and JB respectively)
MIUI rewrote just about the entire user-interface and several of the standard apps to give a different user-experience, but MIUI itself is built on top of Android.
If you've tried CM9 or 10, then there's no harm in trying out a MIUI rom either and see how you like it.
If you make a backup in CWM first you have your phone back working like it is now by just doing a restore.
MIUI v4 ROMS are based on ICS so you use them with the nAa ICS kernel.
Click to expand...
Click to collapse
Cool , thanks bro +1 for ur info i got it and understand .
Free time i'll try MIUI v4 ROM .
Good Luck
Hi Bro @SmG67, can u give me a link MIUI for U20i Good and already testing ?
Thanks.
kbit013 said:
Hi Bro @SmG67, can u give me a link MIUI for U20i Good and already testing ?
Thanks.
Click to expand...
Click to collapse
Try This by Resac, and read the follow-up posts too for some tips on MIUI specific stuff.
The first time you install MIUI it can take a long time to boot (up to 5 or more minutes) so be patient. Have fun
SmG67 said:
Try This by Resac, and read the follow-up posts too for some tips on MIUI specific stuff.
The first time you install MIUI it can take a long time to boot (up to 5 or more minutes) so be patient. Have fun
Click to expand...
Click to collapse
Thanks u so muh bro, +1 Trying.
MIUI Great looking i think n smooth,,,
Sent from my MT11i using xda premium
Yes thx bro, i already test it but it's all base with ICS. +1
will it be ok if i replace the camera.apk of cm9 with the camera.apk from a stock rom? or any other application like contacts or messaging
i dunno if this is a noob question but it just flashed my mind and it would be amazing if it was ok!
Thread moved to Q & A section, post in the relevant section next time.
!!
'cooleagle' said:
Thread moved to Q & A section, post in the relevant section next time.
Click to expand...
Click to collapse
damn it am sorry this is the second time i forget! well.. no answer?
luaifarah said:
will it be ok if i replace the camera.apk of cm9 with the camera.apk from a stock rom? or any other application like contacts or messaging
i dunno if this is a noob question but it just flashed my mind and it would be amazing if it was ok!
Click to expand...
Click to collapse
No It doesn't work in any way....coz of some library issue. (that's what i know...)
--------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------
Thanx If I Helped
--------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------
bliveinhack said:
No It doesn't work in any way....coz of some library issue. (that's what i know...)
--------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------
Thanx If I Helped
--------------------------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
well thanks indeed but what if i installed them manually? coz i tried to take apollo from cm9 and installed it on ka sspeed and it worked.. not as default but its not that hard to make it default! so what if i take the apk files from the stock rom and install them manually on cm9.. i would take the 3d camera and the video player and the album! i dont wanna try myself coz i had a hard time installing the ka sspeed rom so i dont wanna risk losing it again
luaifarah said:
well thanks indeed but what if i installed them manually? coz i tried to take apollo from cm9 and installed it on ka sspeed and it worked.. not as default but its not that hard to make it default! so what if i take the apk files from the stock rom and install them manually on cm9.. i would take the 3d camera and the video player and the album! i dont wanna try myself coz i had a hard time installing the ka sspeed rom so i dont wanna risk losing it again
Click to expand...
Click to collapse
CM9 to any ROM works, vendor ROMs to CM9 doesn't.
K900 said:
CM9 to any ROM works, vendor ROMs to CM9 doesn't.
Click to expand...
Click to collapse
Agreed with k900...you can replace stock app with your cm app.
Sent from my ST25i using XDA Premium HD app
Hello all XDA Xperia Dev as you see in tittle i request for any kernel dev to make CM7 compatible kernel here is complet guide for it Building_Kernel_from_source
I have tested but have many error with python and also my old PC don't wont help me IN XU forum we have many rom but no 1 are CM7 thanks for all and you are welcome to make best experiance for ur device thank you :good::good::good:
Okies I like this initiative
And we can get a stable cm7.2 in no time coz all required sources are available
Why do you want cm7?
Sent from my Xperia Sola using xda app-developers app
IE-coRe said:
Why do you want cm7?
Sent from my Xperia Sola using xda app-developers app
Click to expand...
Click to collapse
maybe it is very stable, not like ics
Sent from my 永遠に渡辺 via xda-premium
I would use cm7.2 if I get it
I always prefer gb
And that too wid cm
Like icing on cake
Quick question (I'm seriously a noob). Does cm 7.2 support the illumination band for xu? Also o had heard cm had camera problems. Are they offset by using other camera apps?
Sent from my ST25i using xda app-developers app
The_0bserver said:
Quick question (I'm seriously a noob). Does cm 7.2 support the illumination band for xu? Also o had heard cm had camera problems. Are they offset by using other camera apps?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
Yes it will support
Coz led bar is nothing bt button backlight
Camera is fine on cm
The_0bserver said:
Quick question (I'm seriously a noob). Does cm 7.2 support the illumination band for xu? Also o had heard cm had camera problems. Are they offset by using other camera apps?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
our device is out with 2.3.7 android system is CM7 if you change kernel for support CyanogenMod lib and remove all smec apps you can make very stable CM7 with fully foncion and The Rom have only 85 or 100 MegaBytes now look what diferance for effect like ICS is also present on GB rom is caled ( transition effect and lockscreen call and theme is present on GB you can done look like ICS on GB with smouth ROM and batterie life .
my question is for what NO ? user are free to install any system on him device ICS or GB or JB it is a matter of taste
spawk said:
our device is out with 2.3.7 android system is CM7 if you change kernel for support CyanogenMod lib and remove all smec apps you can make very stable CM7 with fully foncion and The Rom have only 85 or 100 MegaBytes now look what diferance for effect like ICS is also present on GB rom is caled ( transition effect and lockscreen call and theme is present on GB you can done look like ICS on GB with smouth ROM and batterie life .
my question is for what NO ? user are free to install any system on him device ICS or GB or JB it is a matter of taste
Click to expand...
Click to collapse
Spawk plz make cm7 for xu
I would b first to install that
drsanket_xperia_u said:
Spawk plz make cm7 for xu
I would b first to install that
Click to expand...
Click to collapse
probably i begin this night or tomorow but need some help need kernel for Cm7 now i try to reinstall all my phyton and git bash if succeful i can sync with source and make it with just folowing steep in 1st thread if not need One kernel devloper to make this kernel and share it with us
spawk said:
probably i begin this night or tomorow but need some help need kernel for Cm7 now i try to reinstall all my phyton and git bash if succeful i can sync with source and make it with just folowing steep in 1st thread if not need One kernel devloper to make this kernel and share it with us
Click to expand...
Click to collapse
Fxp is too busy to help ( pm them.. They have working kernels for cm7 )
U can ask munjeni (xgo)
Atis (xgo)
Keiran
Thebrainkafka (xu )
Nickoltus ( xperia p)
Deepunknown (xperia p)
These names bcoz i have seen them developing kernels
Sent from my GT-N7000 using Tapatalk 2
Rom is builded but with out Kernel i try this night downgrading to GB and install sspeed kernel and install ROM if booted in make thread with download link
spawk said:
Rom is builded but with out Kernel i try this night downgrading to GB and install sspeed kernel and install ROM if booted in make thread with download link
Click to expand...
Click to collapse
That's a very fast progress
Superb
Keep it up
Hope it gets booted
Just a querry
Is it stable? Everything working?
drsanket_xperia_u said:
How did u got a cm7 for xu?? U made it??
Click to expand...
Click to collapse
ported but is mix aosp + cm7
I dont know if work I test it tonight untill my soon are sleep and if booted i made thread if not i continue when i suces made it ^^
spawk said:
I dont know if work I test it tonight untill my soon are sleep and if booted i made thread if not i continue when i suces made it ^^
Click to expand...
Click to collapse
Please make it possible for locked bootloader to.
spawk said:
I dont know if work I test it tonight untill my soon are sleep and if booted i made thread if not i continue when i suces made it ^^
Click to expand...
Click to collapse
I wish for the success
And a superb initiative
Cm + gb = performance wid battery
ready to test
Hope someone build the kernel you want.. cuz cm7 based custom roms will be mych better for our xperia u i think..
gb mean is more free ram faster and longer battery life..
From which device will you port cm7?