Related
Hi there guys new to the forums kinda, Been leeching off you guys so it was about time i joined.
Anyways, Recently got my new Viewsonic Viewpad 7 with 2.2.2 stock, Been trying to root it all day, Gingerbreak.apk file no success, Superoneclick No success,
This is where i get stuck.
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
USB Debugging is enabled
Ive tried with USB Storage on and off
Im a very big noob when it comes to android and rooting it, Familiar with Jailbreaking (Very good), Terminals, Linux ( A little with distros).
Yo dont have to treat me like an utter idiot but laymans terms would help
Ricehead said:
Hi there guys new to the forums kinda, Been leeching off you guys so it was about time i joined.
Anyways, Recently got my new Viewsonic Viewpad 7 with 2.2.2 stock, Been trying to root it all day, Gingerbreak.apk file no success, Superoneclick No success,
This is where i get stuck.
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
USB Debugging is enabled
Ive tried with USB Storage on and off
Im a very big noob when it comes to android and rooting it, Familiar with Jailbreaking (Very good), Terminals, Linux ( A little with distros).
Yo dont have to treat me like an utter idiot but laymans terms would help
Click to expand...
Click to collapse
hi
for me gingerbreak works just one click or u can add CWM to ur pad and try amalgations ROM it is prerooted and very very good i have been using it for a very long time and have not even tried the stock rom
read this : http://forum.xda-developers.com/showthread.php?t=1156034
Have you installed the adb driver from the virtual cd ?
Sent from my Dell Streak using XDA App
Amalgation said:
Have you installed the adb driver from the virtual cd ?
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
No is that when i connect my Tablet in and thst ADB.exe file is ?
i believe there is a problem with adb.exe on my computer it wont run, I run it and CMD pops up and closes almost instantly, Ive tried all different compatibility settings to no avail.
Windows 7 x64
Thats the way it works. Its a command line prog. Run setup.exe from the vcd or attempt to run a sync to install adb driver
Sent from my Dell Streak using XDA App
Amalgation said:
Thats the way it works. Its a command line prog. Run setup.exe from the vcd or attempt to run a sync to install adb driver
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Will do report back in a sec.
Amalgation said:
Thats the way it works. Its a command line prog. Run setup.exe from the vcd or attempt to run a sync to install adb driver
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
WOOOHOOO Sir i love you.
Amalgation said:
Thats the way it works. Its a command line prog. Run setup.exe from the vcd or attempt to run a sync to install adb driver
Sent from my Dell Streak using XDA App
Click to expand...
Click to collapse
Im now getting stuck on Step 7 with Zergrush and Step 5 with gingerbreak and psnueter
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$
export TEMPRANDOM=69607;export PS1=END:$TEMPRANDOM;getprop ro.build.version.release
export PS1=""
$
END:69607
export TEMPRANDOM=93007;export PS1=END:$TEMPRANDOM;getprop ro.product.manufacturer
export PS1=""
END:93007
export TEMPRANDOM=85158;export PS1=END:$TEMPRANDOM;getprop ro.product.model
export PS1=""
END:85158
export TEMPRANDOM=26256;export PS1=END:$TEMPRANDOM;getprop ro.build.version.incremental
export PS1=""
END:26256
export TEMPRANDOM=28568;export PS1=END:$TEMPRANDOM;ls -l /system/xbin/su
export PS1=""
/system/xbin/su: No such file or directory
END:28568
export TEMPRANDOM=69157;export PS1=END:$TEMPRANDOM;ls -l /system/bin/su
export PS1=""
/system/bin/su: No such file or directory
END:69157
export TEMPRANDOM=90760;export PS1=END:$TEMPRANDOM;chmod 755 /data/local/tmp/busybox
export PS1=""
END:90760
export TEMPRANDOM=27821;export PS1=END:$TEMPRANDOM;rm /data/local/tmp/boomsh
export PS1=""
END:27821
export TEMPRANDOM=97862;export PS1=END:$TEMPRANDOM;rm /data/local/tmp/sh
export PS1=""
END:97862
export TEMPRANDOM=50098;export PS1=END:$TEMPRANDOM;chmod 700 /data/local/tmp/zergRush
export PS1=""
END:50098
export TEMPRANDOM=78578;export PS1=END:$TEMPRANDOM;cd /data/local/tmp/
export PS1=""
END:78578
export TEMPRANDOM=51968;export PS1=END:$TEMPRANDOM;./zergRush
export PS1=""
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[-] Not a 2.2/2.3 Android ...
END:51968
export TEMPRANDOM=95174;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox mount -o rw,remount /system
export PS1=""
mount: permission denied (are you root?)
END:95174
export TEMPRANDOM=83289;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox mount
export PS1=""
rootfs on / type rootfs (rw,relatime)
tmpfs on /dev type tmpfs (rw,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mtdblock7 on /system type yaffs2 (rw,relatime)
/dev/block/mtdblock10 on /data type yaffs2 (rw,nosuid,nodev,relatime)
tmpfs on /mnt/asec type tmpfs (rw,relatime,mode=755,gid=1000)
/dev/block/mtdblock1 on /misc type yaffs2 (rw,nosuid,nodev,relatime)
/dev/block/mtdblock5 on /hidden type yaffs2 (rw,nosuid,nodev,relatime)
/dev/block/mtdblock9 on /cache type yaffs2 (rw,nosuid,nodev,relatime)
/dev/block/mtdblock8 on /misc2 type yaffs2 (rw,nosuid,nodev,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/block/vold/179:1 on /mnt/sdcard type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/vold/179:1 on /mnt/secure/asec type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
tmpfs on /mnt/sdcard/.android_secure type tmpfs (ro,relatime,size=0k,mode=000)
/dev/block/dm-0 on /mnt/asec/com.bfs.ninjump-1 type vfat (ro,dirsync,nosuid,nodev,noexec,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/dm-1 on /mnt/asec/com.bayview.tapfish-1 type vfat (ro,dirsync,nosuid,nodev,noexec,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/dm-2 on /mnt/asec/com.rovio.angrybirdsseasons-1 type vfat (ro,dirsync,nosuid,nodev,noexec,relatime,uid=1000,fmask=0222,dmask=0222,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
END:83289* daemon not running. starting it now on port 5037 *
* daemon started successfully *
$
export TEMPRANDOM=30814;export PS1=END:$TEMPRANDOM;getprop ro.build.version.release
export PS1=""
$ 2.2.2
END:30814
export TEMPRANDOM=99884;export PS1=END:$TEMPRANDOM;getprop ro.product.manufacturer
export PS1=""
FIH
END:99884
export TEMPRANDOM=19603;export PS1=END:$TEMPRANDOM;getprop ro.product.model
export PS1=""
ViewPad7
END:19603
export TEMPRANDOM=17878;export PS1=END:$TEMPRANDOM;getprop ro.build.version.incremental
export PS1=""
4027_3_620
END:17878
export TEMPRANDOM=14067;export PS1=END:$TEMPRANDOM;ls -l /system/xbin/su
export PS1=""
/system/xbin/su: No such file or directory
END:14067
export TEMPRANDOM=77455;export PS1=END:$TEMPRANDOM;ls -l /system/bin/su
export PS1=""
/system/bin/su: No such file or directory
END:77455
export TEMPRANDOM=39184;export PS1=END:$TEMPRANDOM;chmod 755 /data/local/tmp/busybox
export PS1=""
END:39184
export TEMPRANDOM=48902;export PS1=END:$TEMPRANDOM;rm /data/local/tmp/boomsh
export PS1=""
END:48902
export TEMPRANDOM=70730;export PS1=END:$TEMPRANDOM;rm /data/local/tmp/sh
export PS1=""
END:70730
export TEMPRANDOM=99884;export PS1=END:$TEMPRANDOM;chmod 700 /data/local/tmp/zergRush
export PS1=""
END:99884
export TEMPRANDOM=68933;export PS1=END:$TEMPRANDOM;cd /data/local/tmp/
export PS1=""
END:68933
export TEMPRANDOM=66541;export PS1=END:$TEMPRANDOM;./zergRush
export PS1=""
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a Froyo ! 0x00015108
[*] Scooting ...
[*] Sending 149 zerglings ...
[+] Zerglings found a way to enter ! 0x10
[-] No path found, let's hope ...
[*] Sending 149 zerglings ...
[+] Zerglings caused crash (good news): 0x2abc5cec 0x0064
[-] Siege tanks, we're doomed!
END:66541
export TEMPRANDOM=77310;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox mount -o rw,remount /system
export PS1=""
mount: permission denied (are you root?)
END:77310
export TEMPRANDOM=98384;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox mount
export PS1=""
rootfs on / type rootfs (rw,relatime)
tmpfs on /dev type tmpfs (rw,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
/dev/block/mtdblock7 on /system type yaffs2 (rw,relatime)
/dev/block/mtdblock10 on /data type yaffs2 (rw,nosuid,nodev,relatime)
tmpfs on /mnt/asec type tmpfs (rw,relatime,mode=755,gid=1000)
/dev/block/mtdblock1 on /misc type yaffs2 (rw,nosuid,nodev,relatime)
/dev/block/mtdblock5 on /hidden type yaffs2 (rw,nosuid,nodev,relatime)
/dev/block/mtdblock9 on /cache type yaffs2 (rw,nosuid,nodev,relatime)
/dev/block/mtdblock8 on /misc2 type yaffs2 (rw,nosuid,nodev,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
/dev/block/vold/179:1 on /mnt/sdcard type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/vold/179:1 on /mnt/secure/asec type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,uid=1000,gid=1015,fmask=0702,dmask=0702,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
tmpfs on /mnt/sdcard/.android_secure type tmpfs (ro,relatime,size=0k,mode=000)
END:98384
Try it with the SuperOneclick attached to this post.
Amalgation said:
Try it with the SuperOneclick attached to this post.
Click to expand...
Click to collapse
Ok am trying atm.
Amalgation said:
Try it with the SuperOneclick attached to this post.
Click to expand...
Click to collapse
Success at last Thank you soooo much, onto installing a ROM, Oh dear :/, I bet this is gonna go well.
still not working for my mini pro on win7 x64, any noob friendly solutions? i remember having the same problem with my x10 but forgot how i fixed the problem, it may have been doomlords flashing tool, not sure :/
I've been researching for 5 hours now how to try and ROOT my Phone using Z4 Root 1.3 (also tried 1.1) it results in basically the program just timing out. Ive followed the directions in the video (below). I then saw some people had some success with SuperOneClick. It seems to work for a bit, but the phone doesn't ultimately root. The code below is what results. Ive done my best to try and install the android SDK and ADB. but some of it is over my head so i might be missing something. The instructions on the ADB installation seem out of date though as the images and directions don't fully match. So thats a problem as well.
Phone : AT&T Samsung Galaxy S SGH 1897 on Froyo 2.2.
USB Debugging is enabled. Ive tried Airplane Mode, disabling Lookout. any and everything to help the process.
Im new to this. Im doing my best to figure it out. But admittedly im a noob at this. To anyone that can even point me in the right direction. The ROOT force is not strong with *this guy*
If nothing else thanks for reading.
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
adb server is out of date. killing...
* daemon started successfully *
adb server is out of date. killing...
adb server is out of date. killing...
* daemon started successfully *
export PS1=""
$ getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
export TEMPRANDOM=37467
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
samsung
END:37467export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
export TEMPRANDOM=70578
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
SAMSUNG-SGH-I897
END:70578export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
export TEMPRANDOM=12124
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
UCKB1
END:12124export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=47706
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/xbin/su: No such file or directory
END:47706export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=91362
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/bin/su: No such file or directory
END:91362adb server is out of date. killing...
adb server is out of date. killing...
* daemon started successfully *
export PS1=""
$ chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
export TEMPRANDOM=37315
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
Unable to chmod /data/local/tmp/busybox: No such file or directory
END:37315adb server is out of date. killing...
* daemon started successfully *
adb server is out of date. killing...
* daemon started successfully *
export PS1=""
$ chmod 700 /data/local/tmp/psneuter > /data/local/tmp/output 2>&1
export TEMPRANDOM=95920
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:95920export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
export TEMPRANDOM=12871
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:12871export PS1=""
export TEMPRANDOM=85977;export PS1=END:$TEMPRANDOM;./psneuter
export PS1=""
property service neutered.
killing adbd. (should restart in a second or two)
adb server is out of date. killing...
* daemon started successfully *
adb server is out of date. killing...
adb server is out of date. killing...
adb server is out of date. killing...
adb server is out of date. killing...
* daemon started successfully *
export PS1=""
# /data/local/tmp/busybox mount > /data/local/tmp/output 2>&1
export TEMPRANDOM=90391
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/data/local/tmp/busybox: not found
END:90391export PS1=""
mount > /data/local/tmp/output 2>&1
export TEMPRANDOM=45764
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rootfs / rootfs ro,relatime 0 0
tmpfs /dev tmpfs rw,relatime,mode=755 0 0
devpts /dev/pts devpts rw,relatime,mode=600 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
/dev/block/stl6 /mnt/.lfs j4fs rw,relatime 0 0
tmpfs /mnt/asec tmpfs rw,relatime,mode=755,gid=1000 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
/dev/block/stl9 /system rfs ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/mmcblk0p2 /data rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl10 /dbdata rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl11 /cache rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/stl3 /efs rfs rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8 0 0
/dev/block/vold/179:1 /mnt/sdcard vfat rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
END:45764export PS1=""
mount -o rw,remount /dev/block/stl9 /system > /data/local/tmp/output 2>&1
export TEMPRANDOM=75361
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:75361export PS1=""
mkdir /system/xbin > /data/local/tmp/output 2>&1
export TEMPRANDOM=92181
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
mkdir failed for /system/xbin, File exists
END:92181adb server is out of date. killing...
adb server is out of date. killing...
* daemon started successfully *
export PS1=""
#
export TEMPRANDOM=45540;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox cat /data/local/tmp/8074631.tmp > /system/xbin/su
export PS1=""
/data/local/tmp/busybox: not found
END:45540adb server is out of date. killing...
adb server is out of date. killing...
* daemon started successfully *
export PS1=""
#
export TEMPRANDOM=64672;export PS1=END:$TEMPRANDOM;/data/local/tmp/busybox cat /data/local/tmp/6931057.tmp > /system/bin/su
export PS1=""
/data/local/tmp/busybox: not found
END:64672
Places ive checked:
http://www.addictivetips.com/mobile/what-is-adb-and-how-to-install-it-android/
www.oracle.com/technetwork/java/javase/downloads/jdk-6u29-download-513648.html
http://www.youtube.com/watch?v=LFHLVF1aA0Q
http://forum.xda-developers.com/showthread.php?t=920250
and google.
Can anyone help please?
I was trying to follow the steps to root my Galaxy SL GT i9003 "Gingerbread 2.3.6 JPKPE".
I cant seem to get the option in the USB settings that says "Ask on connection", I only have "Samsung Kies" and "Mass Storage" and "Music Player".
Rooting using Super one click isn't working, I guess it's because of the USB settings.
What should I do?
voidbyte said:
I was trying to follow the steps to root my Galaxy SL GT i9003 "Gingerbread 2.3.6 JPKPE".
I cant seem to get the option in the USB settings that says "Ask on connection", I only have "Samsung Kies" and "Mass Storage" and "Music Player".
Rooting using Super one click isn't working, I guess it's because of the USB settings.
What should I do?
Click to expand...
Click to collapse
Try Odin.. it's easier
Sent from my GT-I9003 using xda premium
Help required from any body on this forum.
I have the same problem that in USB settings I have only 3 options, Samsung Kies, Media player and Mass storage. No option ''ask on connection''.
I doubt due to that, My trial to root my Galaxy GT-I9003 on Gingerbread 2.3.6 JPKPH using superone click stopped at step #7.
Please find details of my phone:
Model number: GT-I9003
Firmware version: 2.3.6
Baseband version: I9003JXKP3
Kernel version: 2.6.35.7-CL982987 [email protected]#1
Build number: GINGERBREAD.JPKPH
Below are the steps as excuted by Superoneclick:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
export PS1=""
$ export PS1=""
getprop ro.build.version.release > /data/local/tmp/output 2>&1
export TEMPRANDOM=77680
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
2.3.6
END:77680export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
export TEMPRANDOM=36945
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
samsung
END:36945export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
export TEMPRANDOM=28792
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
GT-I9003
END:28792export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
export TEMPRANDOM=65795
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
JPKPH
END:65795export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=70208
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/xbin/su: No such file or directory
END:70208export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=79622
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/bin/su: No such file or directory
END:79622export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
export TEMPRANDOM=14443
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:14443export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
export TEMPRANDOM=44569
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
whoami: unknown uid 2000
END:44569export PS1=""
rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1
export TEMPRANDOM=28568
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output END:28568export PS1=""
rm /data/local/tmp/sh > /data/local/tmp/output 2>&1
export TEMPRANDOM=90985
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:90985export PS1=""
chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1
export TEMPRANDOM=50547
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:50547export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
export TEMPRANDOM=22966
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:22966export PS1=""
export TEMPRANDOM=10110;export PS1=END:$TEMPRANDOM;./zergRush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00000118
[+] Found a Samsung, running Samsung mode
[*] Scooting ...
[*] Sleeping a bit (~40s)...
[*] Waking !
[*] Sending 149 zerglings ...
[*] Sleeping a bit (~40s)...
[*] Waking !
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
END:10110export PS1=""
export PS1=""
/data/local/tmp/busybox mount -o rw,remount /system > /data/local/tmp/output 2>&1
export TEMPRANDOM=19226
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output mount: permission denied (are you root?) END:19226export PS1=""
/data/local/tmp/busybox mount > /data/local/tmp/output 2>&1
export TEMPRANDOM=96369
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rootfs on / type rootfs (ro,relatime)
tmpfs on /dev type tmpfs (rw,relatime,mode=111)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
none on /acct type cgroup (rw,relatime,cpuacct)
tmpfs on /mnt/asec type tmpfs (rw,relatime,mode=755,gid=1000)
tmpfs on /mnt/obb type tmpfs (rw,relatime,mode=755,gid=1000)
none on /dev/cpuctl type cgroup (rw,relatime,cpu)
/sys/kernel/debug on /sys/kernel/debug type debugfs (rw,relatime)
/dev/block/stl9 on /system type rfs (ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/stl3 on /efs type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=cp437)
/dev/block/mmcblk0p3 on /data type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/stl10 on /dbdata type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/stl6 on /mnt/.lfs type j4fs (rw,relatime)
debugfs on /debug type debugfs (rw,relatime)
/dev/block/stl11 on /cache type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/vold/179:1 on /mnt/sdcard type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro,discard)
END:96369export PS1=""
/data/local/tmp/busybox mount -o rw,remount /dev/block/stl9 /system > /data/local/tmp/output 2>&1
export TEMPRANDOM=13921
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
mount: permission denied (are you root?)
END:13921export PS1=""
/data/local/tmp/busybox mount > /data/local/tmp/output 2>&1
export TEMPRANDOM=87919
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rootfs on / type rootfs (ro,relatime)
tmpfs on /dev type tmpfs (rw,relatime,mode=111)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
none on /acct type cgroup (rw,relatime,cpuacct)
tmpfs on /mnt/asec type tmpfs (rw,relatime,mode=755,gid=1000)
tmpfs on /mnt/obb type tmpfs (rw,relatime,mode=755,gid=1000)
none on /dev/cpuctl type cgroup (rw,relatime,cpu)
/sys/kernel/debug on /sys/kernel/debug type debugfs (rw,relatime)
/dev/block/stl9 on /system type rfs (ro,relatime,vfat,log_off,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/stl3 on /efs type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=cp437)
/dev/block/mmcblk0p3 on /data type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/stl10 on /dbdata type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/stl6 on /mnt/.lfs type j4fs (rw,relatime)
debugfs on /debug type debugfs (rw,relatime)
/dev/block/stl11 on /cache type rfs (rw,nosuid,nodev,relatime,vfat,llw,check=no,gid/uid/rwx,iocharset=utf8)
/dev/block/vold/179:1 on /mnt/sdcard type vfat (rw,dirsync,nosuid,nodev,noexec,noatime,nodiratime,uid=1000,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro,discard)
END:87919export PS1=""
mount -o rw,remount /dev/block/stl9 /system > /data/local/tmp/output 2>&1
export TEMPRANDOM=92630
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
mount: Operation not permitted
END:92630
Thanks in advance.
Now.. If u got your phone rooted then its fine but if not I would advice you to backup your data and reflash ROM, prefrebly DDKP3..
And root through Odin with Bagaria CF root as pda...Alldone!!
Be sure to first flash XXKPE and then DDKP3!!
Sent from my GT-I9003 using xda app-developers app.
After a lot of searching and testing I have found enough information to make an effort to root the PiPo UpU1 tablet. I believe the methodology employed should be applicable to most RK30xx based tablets.
NOTE: In preparation for "Rooting" I have pre-installed BusyBox v1.11.1, SuperUser v3.1.3, SuperUser Update Fixer v1.2 and Root Checker onto the tablet from Google Play. Now for the good part, rooting…
1) Download "Moborobo". http://download.moborobo.com/download/Client/MoboroboSetup_V2.0.7.501(Moborobo_En_official).exe. The only purpose of "Moborobo" is to get needed drivers for the tablet and to detect its connection to the PC. However, it could be utilized as a file manager.
2) Download "SuperOneClick - Short Fuse". http://forum.xda-developers.com/attachment.php?attachmentid=1248730&d=1344413254.
3) Make sure that USB Debugging is enabled on the tablet (Settings -> Developer Options)
4) Install and start “Moborobo”. Also, check for any internet updates (that might include needed drivers).
5) Turn the tablet “ON”. Connect the tablet to a Windows PC using a USB data cable.
6) Wait for “Moborobo” to detect the tablet or click the “Refresh” button. Don't worry if it stops at 100% when installing drivers. If you don't see any install process action, disconnect and then re-connect the USB cable. Do not “Quit” (Exit) the "Moborobo" program. DO NOT Minimize the “Moborobo” screen.
7) Extract SuperOneClick to the PC desktop. Run SuperOneClick.exe. NOTE: If there are warnings like "your android driver is not installed", "would you like to force install adb drivers", asked if you want to install a driver from an "un-trusted source" or other things, just click “YES”. For those who have already installed an official driver you will probably not see any warning at all.
8) Click the Root button. Select the TEST button to verify the rooting of the tablet. (Yea, success!!! :victory
9) “Quit” (Exit) “SuperOneClick” (“Moborobo” should have already “Quit”).
10) Turn “OFF” USB De-bugging on the tablet. Click “Safely Remove Hardware” in the Windows System Tray, then remove the USB cable from the tablet.
The rooting process should have only taken a few seconds. If anything goes wrong or nothing happens, just “Quit” (Exit) “SuperOneClick” and “Moborobo”. Unplug the USB cable from the tablet. Re-install “Moborobo” on the PC. Also, it is really best to have an internet connection on your PC while doing this process since “Moborobo” may need to download a necessary driver for your device. Repeat steps 5 thru 10.
Now for the fly in the ointment. Next I ran "Root Checker" and it tells me that the tablet is not yet rooted. Here is the detailed analysis:
BusyBox Test
Installed correctly
Root Test
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Standard Location
Check Command: ls - l/system/xbin/su:
Result: -rwsr-sr-x root root 22364 2013-07-13 10:48 su
analysis: Setuid attribute is present and root user ownership is present. Root access is correctly configured for this file! Executing this file can grant root access!
Alternative Location
Check Command: ls - l/system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
Root User ID and Group ID Status: SU binary not found or not operating properly.
System Environment PATH: /sbin/vendor/bin /system/sbin /system/bin /system/xbin
ADB Shell Default User: ADB shell setting for standard access, stored in default.prop, is configured as: root user - ro.secure=0
Now I need a little help from my friends. At this point I am a little over my head. What is an su binary file and how do I get one?
With a little help I think we could have a very nice method for rooting RK30xx based tablets.
Great, I didn't know about this. I usually install first a recovery and then root from there.
Rockchip 3026 Dual core -- is this covered?
I have a new tablet.
Details here:
BLOW WhiteTab 7.2 (from blow.pl) Model# AW132
Android 4.2.2 Kernel Version 3.0.36+ [email protected] #11 Fri Dec 13 10:29:04 CST 2013
Build# rk3026-eng 4.2.2 JDQ39 eng.henglong.20131213.104514 test-keys Rockchip dual core Mali-400 MP2
Thus, it uses the new Rockchip 3026 dual core CPU.
I want to do the usual -- root it and install CWM. Anybody know if the method posted here, for 30xx chips works with the new 3026 as well?
Thanks very much.
You can try this root method for your tablet. http://www.youtube.com/watch?v=QCBLOhWavT0
I've had no luck in using the root method the OP posted.
Otherwise if you have the stock firmware you could potentially try another slightly more complicated method.
Sorry I didnt see that you are also asking
geofferyh said:
After a lot of searching and testing I have found enough information to make an effort to root the PiPo UpU1 tablet. I believe the methodology employed should be applicable to most RK30xx based tablets.
NOTE: In preparation for "Rooting" I have pre-installed BusyBox v1.11.1, SuperUser v3.1.3, SuperUser Update Fixer v1.2 and Root Checker onto the tablet from Google Play. Now for the good part, rooting…
1) Download "Moborobo". http://download.moborobo.com/download/Client/MoboroboSetup_V2.0.7.501(Moborobo_En_official).exe. The only purpose of "Moborobo" is to get needed drivers for the tablet and to detect its connection to the PC. However, it could be utilized as a file manager.
2) Download "SuperOneClick - Short Fuse". http://forum.xda-developers.com/attachment.php?attachmentid=1248730&d=1344413254.
3) Make sure that USB Debugging is enabled on the tablet (Settings -> Developer Options)
4) Install and start “Moborobo”. Also, check for any internet updates (that might include needed drivers).
5) Turn the tablet “ON”. Connect the tablet to a Windows PC using a USB data cable.
6) Wait for “Moborobo” to detect the tablet or click the “Refresh” button. Don't worry if it stops at 100% when installing drivers. If you don't see any install process action, disconnect and then re-connect the USB cable. Do not “Quit” (Exit) the "Moborobo" program. DO NOT Minimize the “Moborobo” screen.
7) Extract SuperOneClick to the PC desktop. Run SuperOneClick.exe. NOTE: If there are warnings like "your android driver is not installed", "would you like to force install adb drivers", asked if you want to install a driver from an "un-trusted source" or other things, just click “YES”. For those who have already installed an official driver you will probably not see any warning at all.
8) Click the Root button. Select the TEST button to verify the rooting of the tablet. (Yea, success!!! :victory
9) “Quit” (Exit) “SuperOneClick” (“Moborobo” should have already “Quit”).
10) Turn “OFF” USB De-bugging on the tablet. Click “Safely Remove Hardware” in the Windows System Tray, then remove the USB cable from the tablet.
The rooting process should have only taken a few seconds. If anything goes wrong or nothing happens, just “Quit” (Exit) “SuperOneClick” and “Moborobo”. Unplug the USB cable from the tablet. Re-install “Moborobo” on the PC. Also, it is really best to have an internet connection on your PC while doing this process since “Moborobo” may need to download a necessary driver for your device. Repeat steps 5 thru 10.
Now for the fly in the ointment. Next I ran "Root Checker" and it tells me that the tablet is not yet rooted. Here is the detailed analysis:
BusyBox Test
Installed correctly
Root Test
Result: /sbin/su: Permission denied
Analysis: File system permissions restricted and denied access.
Standard Location
Check Command: ls - l/system/xbin/su:
Result: -rwsr-sr-x root root 22364 2013-07-13 10:48 su
analysis: Setuid attribute is present and root user ownership is present. Root access is correctly configured for this file! Executing this file can grant root access!
Alternative Location
Check Command: ls - l/system/xbin/sudo:
Result: /system/xbin/sudo: No such file or directory
Analysis: File /system/xbin/sudo does not exist.
Root User ID and Group ID Status: SU binary not found or not operating properly.
System Environment PATH: /sbin/vendor/bin /system/sbin /system/bin /system/xbin
ADB Shell Default User: ADB shell setting for standard access, stored in default.prop, is configured as: root user - ro.secure=0
Now I need a little help from my friends. At this point I am a little over my head. What is an su binary file and how do I get one?
With a little help I think we could have a very nice method for rooting RK30xx based tablets.
Click to expand...
Click to collapse
I've ARGUS 7 MYPAD, process were run successfully but no root access!!!
IntelliBook
Hi @ all,
I'm trying to root this tablet, but unfortunately it does not work: (
Code:
Hardware
Board: Intellibook
CPU ABI: armeabi-V7A
Brand: MID
Device: Intellibook
Display: AML MXS_ANDROID4.2.2_INTELLIBOOK_V1.0.1_09162013
Fingerprint: MID / Intellibook / Intellibook: 4.2.2/JDQ39/20130916: user / test-keys
ID: JDQ39
Manufacturer: MID
Model: Intellibook
Product: Intellibook
software
SDK: 17
SDK code name: REL
Incremental SDK: 20130916
SDK release: 4.2.2
Tags: test-keys
Type: user
User: gqsu
Host: Ubuntu3
Have executed the above instructions
but SuperOneClick stops at Step7 ...
Code:
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
export PS1=""
[email protected]:/ $ export PS1=""
getgetprop ro.build.version.release > /data/local/tmp/output 2>&1
export TEMPRANDOM=18480
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
4.2.2
END:18480export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
export TEMPRANDOM=29843
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
MID
END:29843export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
export TEMPRANDOM=77310
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
INTELLIBOOK
END:77310export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
export TEMPRANDOM=51591
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
20130916
END:51591export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=75063
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/xbin/su: No such file or directory
END:75063export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=30140
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/bin/su: No such file or directory
END:30140export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
export TEMPRANDOM=42996
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:42996export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
export TEMPRANDOM=63628
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
whoami: unknown uid 2000
END:63628export PS1=""
rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1
export TEMPRANDOM=53388
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rm failed for /data/local/tmp/boomsh, No such file or directory
END:53388export PS1=""
rm /data/local/tmp/sh > /data/local/tmp/output 2>&1
export TEMPRANDOM=83513
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
export TEMPRANDOM=83513
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rm failed for /data/local/tmp/sh, No such file or directory
END:83513export PS1=""
chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1
export TEMPRANDOM=86274
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:86274export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
export TEMPRANDOM=26401
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:26401export PS1=""
export TEMPRANDOM=79325;export PS1=END:$TEMPRANDOM;./zergRush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a Froyo ! 0x00000108
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
END:79325export PS1=""
export PS1=""
/data/local/tmp/busybox mount -o rw,remount /system > /data/local/tmp/output 2
ount /system > /data/local/tmp/output 2 <>&1
export TEMPRANDOM=47554
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
mount: permission denied (are you root?)
END:47554export PS1=""
/data/local/tmp/busybox mount > /data/local/tmp/output 2>&1
export TEMPRANDOM=57497
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rootfs on / type rootfs (rw)
tmpfs on /dev type tmpfs (rw,nosuid,relatime,size=443044k,nr_inodes=90450,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
none on /proc/bus/usb type usbfs (rw,relatime)
none on /acct type cgroup (rw,relatime,cpuacct)
tmpfs on /mnt/secure type tmpfs (rw,relatime,size=443044k,nr_inodes=90450,mode=700)
tmpfs on /mnt/asec type tmpfs (rw,relatime,size=443044k,nr_inodes=90450,mode=755,gid=1000)
tmpfs on /mnt/obb type tmpfs (rw,relatime,size=443044k,nr_inodes=90450,mode=755,gid=1000)
none on /dev/cpuctl type cgroup (rw,relatime,cpu)
tmpfs on /storage/external_storage type tmpfs (rw,relatime,size=443044k,nr_inodes=90450,mode=775,gid=1000)
/dev/block/system on /system type ext4 (ro,noatime,nodiratime,user_xattr,acl,barrier=1,data=ordered,noauto_da_alloc)
/dev/block/data on /data type ext4 (rw,nosuid,nodev,noatime,nodiratime,user_xattr,acl,barrier=1,data=ordered,noauto_da_alloc)
/dev/block/cache on /cache type ext4 (rw,nosuid,nodev,noatime,nodiratime,user_xattr,acl,barrier=1,data=ordered,noauto_da_alloc)
/dev/block/dm-0 on /mnt/asec/com.teslacoilsw.launcher.prime-1 type ext4 (ro,dirsync,nosuid,nodev,noatime,user_xattr,acl,barrier=1)
/dev/block/dm-1 on /mnt/asec/eu.chainfire.supersu.pro-1 type ext4 (ro,dirsync,nosuid,nodev,noatime,user_xattr,acl,barrier=1)
/dev/block/dm-2 on /mnt/asec/com.beansoft.keyboardplus-1 type ext4 (ro,dirsync,nosuid,nodev,noatime,user_xattr,acl,barrier=1)
/dev/block/vold/250:33 on /storage/sdcard0 type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
/dev/block/vold/250:33 on /mnt/secure/asec type vfat (rw,dirsync,nosuid,nodev,noexec,relatime,gid=1015,fmask=0002,dmask=0002,allow_utime=0020,codepage=cp437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro)
tmpfs on /storage/sdcard0/.android_secure type tmpfs (ro,relatime,size=0k,mode=000)
/dev/block/dm-3 on /mnt/asec/com.moborobo.daemon-1 type ext4 (ro,dirsync,nosuid,nodev,noatime,user_xattr,acl,barrier=1)
MoboRobo is currently ...
has anyone a hint what I'm doing wrong?
greeting
Sven
Just for info guys http://www.rock-chips.com/a/en/products/RK30_Series/2013/0731/371.html
The rk3026 is pin-to-pin compatible with the rk2926 so maybe try the Ramdisk only version for that model?
If anyone can help with building a rom/cwm for the rk3026 then PM me
hope this helps
very nice
i do it with moroboror -> for dirve
and with andoird root
in fact , if this not working it is only the drives prob so just reboot your pc again and again until
the pc install the drivers
other freind used shuame for rooting thoise rk3026 md702b tablet
hey guys i flashed my rk3066 tablet with Mk808 b rom . now i got a white screen . i dont have any working firmware right now. is there anything i can do to get it working again?, many thanks.
You must download a stock rom for RK3066 inexact details,
xain1568 said:
hey guys i flashed my rk3066 tablet with Mk808 b rom . now i got a white screen . i dont have any working firmware right now. is there anything i can do to get it working again?, many thanks.
Click to expand...
Click to collapse
Hi, you just flashed with less info about Rockchip : find a new download by searching on top this page of xda-developers ,
etc: ""rk3026_4.4.2_c86s_V05_zhongx_800x480_gc0308_gc0329_siv121du_V003_20140715.zip" these sps details are in your phone about, but your screen blank, connect to pc with kingoroot or any root on pc , it's showing your tab screen on pc-laptop. And or you searching: "Oma_RK3066_Root_and_Dump" ,sorry that i don't saved those links url. Use adb command to push this zip to device "/mnt/internal_sd/", after that you adb install (any launched.apk) for your device extract and launch zip file. A simple way , that using adb with usb debug, check unknow sources. at this time you can copy files and folder from pc to your devices sames as in Windows. Go to devices and open folder or file, unzip and run apk ( you don't need to views screen images ... just right click to file and open/or install/ or run as admin .when reboot you must seen your screen as defaults. ( but you may install more apks that your device needed.
Hey guys!
Well, I purchased this phone called Multilaser Orion P3181 here in Brazil days ago, and I've been trying to root it. I tried several times using different tools but I just can't. Are you able to help me?
I searched a lot before starting a thread and I found ways to root Android 2.3.7 but I couldn't get it done. I want to root it mainly because I can't install too many apps since its storage memory is really bad, and I'd also like to take screenshots.
Here's the log when I tried to root it with SuperOneClick v2.3.3
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
export PS1=""
$ export PS1=""
getprop ro.build.version.release > /data/local/tmp/output 2>&1
export TEMPRANDOM=11900
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
2.3.7
END:11900export PS1=""
getprop ro.product.manufacturer > /data/local/tmp/output 2>&1
export TEMPRANDOM=93304
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
Multilaser
END:93304export PS1=""
getprop ro.product.model > /data/local/tmp/output 2>&1
export TEMPRANDOM=40083
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
Multilaser Orion
END:40083export PS1=""
getprop ro.build.version.incremental > /data/local/tmp/output 2>&1
export TEMPRANDOM=25806
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
eng.gfs.20130312.194614
END:25806export PS1=""
ls -l /system/xbin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=62584
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/xbin/su: No such file or directory
END:62584export PS1=""
ls -l /system/bin/su > /data/local/tmp/output 2>&1
export TEMPRANDOM=16683
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
/system/bin/su: No such file or directory
END:16683export PS1=""
chmod 755 /data/local/tmp/busybox > /data/local/tmp/output 2>&1
export TEMPRANDOM=98014
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:98014export PS1=""
/data/local/tmp/busybox whoami > /data/local/tmp/output 2>&1
export TEMPRANDOM=17958
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
whoami: unknown uid 2000
END:17958export PS1=""
rm /data/local/tmp/boomsh > /data/local/tmp/output 2>&1
export TEMPRANDOM=25951
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:25951export PS1=""
rm /data/local/tmp/sh > /data/local/tmp/output 2>&1
export TEMPRANDOM=76259
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:76259export PS1=""
chmod 700 /data/local/tmp/zergRush > /data/local/tmp/output 2>&1
export TEMPRANDOM=43670
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:43670export PS1=""
cd /data/local/tmp/ > /data/local/tmp/output 2>&1
export TEMPRANDOM=83586
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
END:83586export PS1=""
export TEMPRANDOM=43895;export PS1=END:$TEMPRANDOM;./zergRush
[**] Zerg rush - Android 2.2/2.3 local root
[**] (C) 2011 Revolutionary. All rights reserved.
[**] Parts of code from Gingerbreak, (C) 2010-2011 The Android Exploid Crew.
[+] Found a GingerBread ! 0x00000118
[*] Scooting ...
[*] Sending 149 zerglings ...
[*] Sending 189 zerglings ...
[-] Hellions with BLUE flames !
END:43895export PS1=""
export PS1=""
/data/local/tmp/busybox mount -o rw,remount /system > /data/local/tmp/output 2>&1
export TEMPRANDOM=56598
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
mount: permission denied (are you root?)
END:56598export PS1=""
/data/local/tmp/busybox mount > /data/local/tmp/output 2>&1
export TEMPRANDOM=14443
export PS1=END:$TEMPRANDOM;cat /data/local/tmp/output
rootfs on / type rootfs (ro,relatime)
tmpfs on /dev type tmpfs (rw,relatime,mode=755)
devpts on /dev/pts type devpts (rw,relatime,mode=600)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /mnt/asec type tmpfs (rw,relatime,mode=755,gid=1000)
tmpfs on /mnt/obb type tmpfs (rw,relatime,mode=755,gid=1000)
/dev/block/mtdblock12 on /system type yaffs2 (ro,relatime)
/dev/block/mtdblock15 on /data type yaffs2 (rw,nosuid,nodev,relatime)
/dev/block/mtdblock13 on /cache type yaffs2 (rw,nosuid,nodev,relatime)
END:14443
Click to expand...
Click to collapse
Thanks!
can't anyone help me?!
try other root tool like- vroot,unlockroot latest,binary and others !
Try This
http://forum.xda-developers.com/showthread.php?t=2470487
Vist My Thread & Hit Thankz
thedevilashish said:
http://forum.xda-developers.com/showthread.php?t=2470487
Vist My Thread & Hit Thankz
Click to expand...
Click to collapse
Whoa! Thanks, I'll try this out and let y'all know if it worked!
anabhi said:
try other root tool like- vroot,unlockroot latest,binary and others !
Click to expand...
Click to collapse
I've tried all these ways and I've followed thedevilashish's tutorial but still didn't get to root my phone. I read in a brazilian site that I should use Unlockroot but I should click on the unroot button first before trying to root it. But Unlockroot simply can't regognize my phone, I don't know why. Maybe it's because my PC is Windows 8.1 but I'm pretty sure all the drivers are installed since all the programs can find my phone.
Any more solutions? I'm losing my hopes over here Thank you all for trying to help me, anyways!