[Q] Stuck on Express Rom - HTC EVO 3D

about a week ago i flashed The Express Rom on my 3D. It's a cool rom, but not for me, so i attempted to flash back to Viper rom, which had run just fine before. upon booting after ref lashing viper, everything was going fine up until it was time for the lockscreen to load. the background would come on the screen, but nothing else. after a few seconds the phone reboots itself and the process starts all over. this happens with any other rom i try to install. any one had a similar issue??

You need to give us more information. What recovery are you using? Did you make a nandroid backup? Are you fully wiping before flashing?

I've used cwm and TWRP and I'm on EXT4 now, none of which make a difference. no nondroid back up. and yes I'm doing a full wipe every time.

what hboot are you on? 1.5? 1.4?

Have you tried using viper from super wipe?

im hboot 1.5... I'm on a mac so i can't do the downgrade. I've never tried superwip, where can i get that?

Okay, do you have the app flash image gui? thats what I used when on 1.5. Pick the rom ya wanna flash using that app, let it load the kernel, flash and reboot to recovery. When using 4EXT you should factory reset and wipe cache+dalvik, then flash the rom of your choice, wipe cache and dalvik, power down, then power back up. Hopefully ya should be in the clear...

cool ill try it now, usually i flash the kernel after flashing the rom, ill try that out though

The super wipe is in the viper from thread.

Yeah, you normally flash after the ROM if you are wanting to change it. But with hboot 1.5 you cannot flash a kernel without adb and a computer or the flash image gui app.

RIPBAP1999 said:
Yeah, you normally flash after the ROM if you are wanting to change it. But with hboot 1.5 you cannot flash a kernel without adb and a computer or the flash image gui app.
Click to expand...
Click to collapse
Wrong. You can flash kernels with 4ext.

GOOD CALL!! looks like it was the kernel holding me back the whole time! thanks a million!

iTzLOLtrain said:
Wrong. You can flash kernels with 4ext.
Click to expand...
Click to collapse
Badass. Just started using 4ext right after I downgraded hboot, so I dont have that problem anymore. But I know it stumped me a couple times, those damn kernels....
---------- Post added at 08:05 PM ---------- Previous post was at 08:04 PM ----------
aykrico562 said:
GOOD CALL!! looks like it was the kernel holding me back the whole time! thanks a million!
Click to expand...
Click to collapse
hells yeah, happy flashin.

Just to add....
You should be able to downgrade Hboot 1.50 on a mac from what I've seen in Closeone's Downgrade Tool thread. He recently added directions for burning the .ISO to a cd on mac.
Once bricked & booted to the cd the rest should work. There is even an option in the cd to test the connection to the phone from the cd before bricking it.
Sent from my PG86100 using Tapatalk

Are you using a super wipe
Sent from my HTC EVO 3D X515m using xda premium

Here you go.down load this super wipe tool. http://www.androidfilehost.com/main...ernity/Buildbox/GSM/tools/1.Infected_Wipe.zip
Sent from my HTC EVO 3D X515m using xda premium

Had similar problems, I what worked for was to go back to stock, but full swipe than before you flash again to another rom, do another full swipe and that should work, in my case it did. hope this works for ya

Related

Need help with evo 3d stuck at boot screen

Hey guys maybe some budy can help, I can go into recovery and wipe data, cache etc.. but for some reason I can't run any rom that runs with sence they all get stuck at boot screen, the phone freezes,.. but I can intall miui through fastboot and everything runs ok, rom boots it doesn't get stuch what's happening, by the way I unrooted the phone the HTC way so I'm on 1.5..
You need to reinstall a different kernel through fastboot usb. If miui works then a sense rom won't until you flash compatible kernel.
Sent from my PG86100 using xda premium
Soulcraft said:
You need to reinstall a different kernel through fastboot usb. If miui works then a sense rom won't until you flash compatible kernel.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
gootcha, this makes lots of sence, thanks a ton ..now I'm a camper..
Similar problem being stuck in boot screen
I am on twrp shooter 2.0 with hboot 1.5 and I was running syncombelite when I tried to in stall the CM9 Alpha build and I was not having luck with loading the rom through recovery so I tried to use Flash image GUI. It loaded the image but after it was done it would not boot. I was stuck on the HTC boot screen. I tried to do a nandroid recovery and the same thing over and over. I figured maybe try a different rom so I tried a couple.. I used one and it actually made it past the boot screen and loaded the Beats audio logo then was stuck there for maybe 30 minutes before I tried a reboot and the same thing. Then I though I wll do a superwipe so I downloaded the synergy superwipe along with the
fresh-evo-3d-4.2.0 then it made it past the HTC boot and just went black for another 30 minutes. Now I am at a loss. Please help me...
Dale if your reading this I am the guy you helped a while back with the Toshiba thrive..maybe a month ago then I made a generous donation. I am happy to pay someone for their time. Please help..I need my phone. Thanks all.
elmatador2 said:
Hey guys maybe some budy can help, I can go into recovery and wipe data, cache etc.. but for some reason I can't run any rom that runs with sence they all get stuck at boot screen, the phone freezes,.. but I can intall miui through fastboot and everything runs ok, rom boots it doesn't get stuch what's happening, by the way I unrooted the phone the HTC way so I'm on 1.5..
Click to expand...
Click to collapse
your phone is doing a boot loop b/c your boot.img file is corrupt... the rom you are trying to install isnt installing properly and is causing this issue....what version of the rom are you trying to install?
---------- Post added at 02:02 AM ---------- Previous post was at 01:59 AM ----------
lonewolf5557 said:
I am on twrp shooter 2.0 with hboot 1.5 and I was running syncombelite when I tried to in stall the CM9 Alpha build and I was not having luck with loading the rom through recovery so I tried to use Flash image GUI. It loaded the image but after it was done it would not boot. I was stuck on the HTC boot screen. I tried to do a nandroid recovery and the same thing over and over. I figured maybe try a different rom so I tried a couple.. I used one and it actually made it past the boot screen and loaded the Beats audio logo then was stuck there for maybe 30 minutes before I tried a reboot and the same thing. Then I though I wll do a superwipe so I downloaded the synergy superwipe along with the
fresh-evo-3d-4.2.0 then it made it past the HTC boot and just went black for another 30 minutes. Now I am at a loss. Please help me...
Dale if your reading this I am the guy you helped a while back with the Toshiba thrive..maybe a month ago then I made a generous donation. I am happy to pay someone for their time. Please help..I need my phone. Thanks all.
Click to expand...
Click to collapse
dont be upset.... i got CM9 to work on my phone just b/c i wanted ICS but there is a graphical error in the set up and overall isnt worth it... just wait till they iron out some bugs i say abd then worry about ICS
How did you get CM9 to work...what recovery are you using and so on..?
lonewolf5557 said:
How did you get CM9 to work...what recovery are you using and so on..?
Click to expand...
Click to collapse
i use boot manager pro first off b/c i am a flashaholic... but if i recall correctly i had to use the boot.img from cm7 and migrate it over to the cm 9 set up and let it install from there...
im on hboot 1.5 with clockwork mod recovery... ver 4.0.1.4 any other ?'s just ask
lonewolf5557 said:
How did you get CM9 to work...what recovery are you using and so on..?
Click to expand...
Click to collapse
The recovery you use shouldn't matter. I have used CWM touch and non and TWRP all the same as long as it works for you. The easy way to flash CM9 is to use FlashImageGUI.apk before you wipe your current rom. Do not wipe ROM before using FlashGUI as it needs a OS to run on.
First flash recovery, whichever you want. If you don't already have one.
Put CM9 on sd
Flash boot.img from CM9.zip with Flash...GUI.apk (browse to CW9 on sd card)
Boot recovery, Flash rom from there.
(Flash..GUI should ask if you want to boot recovery after flash)
I used TWRP to flash CM9 tonight so I know it works 100%
I have tried that and I get stuck at HTC boot screen. I'm at a loss. I finally got virus eternity to flash using fastboot on my pc. I then tried ics (yes I know that's not what we were talking about) but I can't flash many different Roms lately. It's just weird. I have been rooting and flashing for a couple years now but I'm feeling more noobish lately than ever.
Sent from my PG86100 using xda premium
lonewolf5557 said:
I have tried that and I get stuck at HTC boot screen. I'm at a loss. I finally got virus eternity to flash using fastboot on my pc. I then tried ics (yes I know that's not what we were talking about) but I can't flash many different Roms lately. It's just weird. I have been rooting and flashing for a couple years now but I'm feeling more noobish lately than ever.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
i use a program called boot manager pro and it actually works... its for flashaholics... but the full build that i download works... i do have a prob booting into it at first.. it will hang at the HTC screen... but i pull the battery out and reboot and it goes right to the cyanogenmod boot up wondow and boots up... make sure you install the gapps before hand otherwise youll have a pain in the butt time trying to work around it but its do-able ......pm me if you need help ill be up for a bit....

[Q] flashed sense 3.6 ICS, boot loop?

I was cruising around the development forums today, curious if any ICS ROMs had been updated and were worth using.
I found this: http://forum.xda-developers.com/showthread.php?t=1635824
Reading the posts of success in the thread and finding my self wanting to flash this more and more, i finally gave in and flashed. I went through the FlashGUI app to get the kernel working, then i recovery'd to flash the .zip. Now im stuck in a boot loop, it goes from the "htc" screen to "android", shows a black screen and the status bar at the top, then reboots again. The reboot is fast like a hot boot. What should I do to fix this? Thank you, I'm new to posting but i've been looking around here for awhile
Also, if it mattered, i have team win recovery and s-off Hboot 1.5 using the Htc Unlocker. Thank you!!
EDIT: I'm S-ON, not S-OFF. My mistake!
I have s-off and came from 2.17 firmware. All I did was wipe and flash the rom. Working just Fine. Uf ur s-off I would just re flash a stock firmware, factory reset and flash rom again
Edit read your edit......sorry
Sent from my HTC EVO 3D using XDA
Ok I would reflash the Rom you was using before and the kernel oh you need to super wipe also and since your s off you don't need to use the g u i app thats for the ones that are not s off you can flash just like everyone else that's has s off meaning just use your custom recovery and make sure to wipe ceche and wipe delvik ceche and wipe battery stats format system and format data and wipe boot IMG and format all partitions except sd card when this is done press back and back again and you should see your download folder now you can flash your Rom and if you want you can flash a different kernel besides the one that can with you Rom I hope this helps
sent from my EVO 3D x515m s off using xda premium
Well in that case continue to use the g u i app
sent from my EVO 3D x515m s off using xda premium
And did you try reflashing the kernel through the g u i app
sent from my EVO 3D x515m s off using xda premium
and did you back up before hand? u need always to have a good backup any time u are flashing. i keep the last two on my sd card. that way if one gives me a problem which has happened like md5 not matching i have a second one to try

Need help

So I unlocked the bootloader using the Htc dev unlock method I have hboot1.5 then flashed clockwork mod recovery and flashed the newt one s rc3 rom and the boot image all I get is bootloops over and over lock screen comes up with battery icon and everything but the lock ring and then reboots I tried to restore a nandroid if my stock rom all it does is go to the white screen with the green Htc letters and then it goes black and nothing, I can get into recovery but not fast boot USB I even tried flashing other Roms and the rooted stock Rom but to no avail it doesn't work. I really don't know what to do to get it back to normal I would be very gratefully if any of you could help me with this
Did you originally flash through fastboot?
If you didn't, and now can't get fastboot to work, your best option is to flash whatever ROM you were originally coming from (sounds like stock) and flash that.
I know you said you tried it, but that really is your best bet. I'd try it again, wiping data a few times and doing a reset.
Sent from my PG86100 using XDA
flonker said:
Did you originally flash through fastboot?
If you didn't, and now can't get fastboot to work, your best option is to flash whatever ROM you were originally coming from (sounds like stock) and flash that.
I know you said you tried it, but that really is your best bet. I'd try it again, wiping data a few times and doing a reset.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
I tried to flash back my nandroid of my stock rooted rom 7 times wiped dalvick everything
I flashes by holding volume down and power till fast boot screen came up then selected recovery and flashed through revolutionary like I do on my og evo
Okay.
If you don't boot the recovery through fastboot, the kernel won't stick. So if you were just flashing through recovery without booting the recovery through fastboot, you probably still are running a stock GB kernel.
I would download a stock Rom and flash that. Do a factory data reset before flashing the Rom and wipe cache. That should work, assuming that you are still running a stock kernel. From the way you've explained things I would think you are.
Sent from my PG86100 using XDA
taguluchi said:
I flashes by holding volume down and power till fast boot screen came up then selected recovery and flashed through revolutionary like I do on my og evo
Click to expand...
Click to collapse
Unlocking the phone on hboot 1.5 via HTC, leaves you with S-ON. You can still flash any ROM you want, but it is a little bit different than OGEvo. You can't just flash through recovery, especially if you're switching from GB to ICS. This may also be while your nandroid failed... Although I'm not sure because I've never had to run a nandroid and I've never created one outside of fastboot.
So, I would try...
Downloading a stock Rom.
Wipe data/Factory Reset.
Flash Rom (like you've been trying to)
That should work.
Then I'd check out how to properly flash a ROM in the stickies, there are a couple different methods, but you can't do it on your 3D like you did on your OG unless you get S-OFF.
Sent from my PG86100 using XDA
flonker said:
Unlocking the phone on hboot 1.5 via HTC, leaves you with S-ON. You can still flash any ROM you want, but it is a little bit different than OGEvo. You can't just flash through recovery, especially if you're switching from GB to ICS. This may also be while your nandroid failed... Although I'm not sure because I've never had to run a nandroid and I've never created one outside of fastboot.
So, I would try...
Downloading a stock Rom.
Wipe data/Factory Reset.
Flash Rom (like you've been trying to)
That should work.
Then I'd check out how to properly flash a ROM in the stickies, there are a couple different methods, but you can't do it on your 3D like you did on your OG unless you get S-OFF.
Sent from my PG86100 using XDA
Click to expand...
Click to collapse
It was because I wasn't going through fast boot for my recovery went through that and flashed my nandroid and I'm all good now
Glad you got it working.
Sent from my PG86100 using XDA

Wifi doesnt work after flashing Meanrom v26ICS.

I have the Evo 3d, and i flashed the meanrom ics. After i had flashed it wifi doesnt work, there is an error. I have the OTA update from sprint before i flashed it. I do not have s-off, but his thread says you do not need it. i have done a superwipe and then tryed to reflash it after i did the superwipe and still the same problem.
Did you flash the new firmware? Radios? Have you tried flashing another rom?
Yeah i did try flashing a new rom and its still the same problems, wifi doesnt work. If you know were i can find the legit stock rom ill try to download that but i cant seem to find it anywhere.
Once again, Did you flash the new firmware? Radios?
If you know were i can find the legit stock rom ill try to download that but i cant seem to find it anywhere.
Click to expand...
Click to collapse
Rooted stock roms are in the CDMA Development section.
I had the same problem. Solution I used was to flash kernel from the mean Rom using flashimagegui. Worked fine after a reboot!
Sent from my SPH-L710 using xda app-developers app
Just be very careful in which kernel you flash, s-off is required for flashing certain kernels
sent on my Evil Evo running the so called developers kernel
flashallthetime said:
Just be very careful in which kernel you flash, s-off is required for flashing certain kernels
sent on my Evil Evo running the so called developers kernel
Click to expand...
Click to collapse
OK but on his thread it says its of the 2.17 kernal so that anyone can do it no matter the gboot. But it doesnt matter anymore i finnaly got s-off to work and just super wiped it and re-flashed it again and it works.
Mclarkiin said:
OK but on his thread it says its of the 2.17 kernal so that anyone can do it no matter the gboot. But it doesnt matter anymore i finnaly got s-off to work and just super wiped it and re-flashed it again and it works.
Click to expand...
Click to collapse
As you can see from yet another success story, anybody who sees this in the future, stop fooling around with s-on. Just get s-off and be done with it. :good:
I have A solution
Mclarkiin said:
I have the Evo 3d, and i flashed the meanrom ics. After i had flashed it wifi doesnt work, there is an error. I have the OTA update from sprint before i flashed it. I do not have s-off, but his thread says you do not need it. i have done a superwipe and then tryed to reflash it after i did the superwipe and still the same problem.
Click to expand...
Click to collapse
I think i have a solution for your problem it worked for me , By the way I used 4ext touch Recovery
in recovery when you are going to flash the new Rom make sure you select { wipe data/factory reset,,wipe cach ,, wipe dalvik cach } and most important select {format all partitions (except sdcard)
after all that you are ready to install the new Rom then Reboot the device and you shall not have any problems with your WiFi But Bluetooth still wont start or work
mobi from my Nexus 5 using XDA Free mobile app
---------- Post added at 02:30 PM ---------- Previous post was at 02:28 PM ----------
my Nexus 5 using XDA Free mobile app
you
I

[Q] TWRP Restoring problems

the other day i tried restoring a back up via TWRP but it didnt work until i fastboot flashed boot.img...Alright so i updated my TWRP via goomanager app to the latest version (whatever is on there via goomanager) as in the TWRP forum discussions it was stated that previous versions were not working properly wihen restoring. So today i flashed a new ROM (NOS ROM) but that didnt work so i decided what better time than now to try restoring again, no dice didnt work and i had to fastboot flash the boot img for the restore file to take and boot up just fine again...ok peeps what am doing wrong??? again im fairly new at this flashing ROMS scene but i thought witht he TWRP update i would be good to go. Am i missing some settings ticks/options/checks? i saw a check box that said "recovery" i think in the restore or back up process dont remember which process. i tried going onto the TWRP discussion but it is locked down and states that there will no longer be any support for it...should i just switch to CWM?? thanks in advance to whom ever replies
twrp recovery..
kenohki88 said:
the other day i tried restoring a back up via TWRP but it didnt work until i fastboot flashed boot.img...Alright so i updated my TWRP via goomanager app to the latest version (whatever is on there via goomanager) as in the TWRP forum discussions it was stated that previous versions were not working properly wihen restoring. So today i flashed a new ROM (NOS ROM) but that didnt work so i decided what better time than now to try restoring again, no dice didnt work and i had to fastboot flash the boot img for the restore file to take and boot up just fine again...ok peeps what am doing wrong??? again im fairly new at this flashing ROMS scene but i thought witht he TWRP update i would be good to go. Am i missing some settings ticks/options/checks? i saw a check box that said "recovery" i think in the restore or back up process dont remember which process. i tried going onto the TWRP discussion but it is locked down and states that there will no longer be any support for it...should i just switch to CWM?? thanks in advance to whom ever replies
Click to expand...
Click to collapse
What did you have checked while making the backup? data? recovery? cache? system? and did you rename the back up?
System, data and boot are checked...I didn't mess with the options just hit restore and let it do it's thing...should I change something or check the other 2 boxes (one of them being "recovery" forgot what the other option was)?
Sent from my HTC6435LVW using xda app-developers app
kenohki88 said:
System, data and boot are checked...I didn't mess with the options just hit restore and let it do it's thing...should I change something or check the other 2 boxes (one of them being "recovery" forgot what the other option was)?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I would check recovery as well and try again.....also make sure to wipe everything before flashing anything
---------- Post added at 12:42 PM ---------- Previous post was at 12:34 PM ----------
canemaxx said:
I would check recovery as well and try again.....also make sure to wipe everything before flashing anything
Click to expand...
Click to collapse
also some roms are picky about which recovery is used to install/backup. I can say I have had no issues backing up stock or custom roms with twrp on my DNA
Alright sounds good maybe later on tonight when I'm at my computer just in case thank you for the tips I as well haven't had much trouble flashing ROMS with TWRP, albeit I've only tried flashing 2 or 3 been very happy with ViperDNA just wanted to check out different ones and easily restore back to viper
Sent from my HTC6435LVW using xda app-developers app
kenohki88 said:
Alright sounds good maybe later on tonight when I'm at my computer just in case thank you for the tips I as well haven't had much trouble flashing ROMS with TWRP, albeit I've only tried flashing 2 or 3 been very happy with ViperDNA just wanted to check out different ones and easily restore back to viper
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Check out NOS its a great rom
canemaxx said:
Check out NOS its a great rom
Click to expand...
Click to collapse
That's exactly what I was trying when all this happened...I flashed it via flash gui app like I've been doing but for some reason it didn't work...when I went to unlock screen it would pull up HTC splash screen and just stay stuck there... I'm not S-off yet so would that have something to do with NOS ROM not functioning?
Sent from my HTC6435LVW using xda app-developers app
kenohki88 said:
That's exactly what I was trying when all this happened...I flashed it via flash gui app like I've been doing but for some reason it didn't work...when I went to unlock screen it would pull up HTC splash screen and just stay stuck there... I'm not S-off yet so would that have something to do with NOS ROM not functioning?
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
no thats how that rom boots....leave it alone for about 5-10 minutes youlll see the notificatiion light come on and your =e good to go
Let me rephrase that...it boots up, screen comes on silver background from butterfly then I go pull ring to unlock and it pulls up the HTC splash screen once I unlock and will not move from there...so that's when I reset and went back to viper...???
Sent from my HTC6435LVW using xda app-developers app
kenohki88 said:
Let me rephrase that...it boots up, screen comes on silver background from butterfly then I go pull ring to unlock and it pulls up the HTC splash screen once I unlock and will not move from there...so that's when I reset and went back to viper...???
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Flash the new Nos build, and flash cpalmers kernel after the Rom install and then reboot.
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Haven't tried it since I posted this, but ok I'll give it another spin/attempt this weekend thanks for the tip
Sent from my HTC6435LVW using xda app-developers app
kenohki88 said:
Haven't tried it since I posted this, but ok I'll give it another spin/attempt this weekend thanks for the tip
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I may have misread but did you wipe everything before loading nos? I saw what was checked for backup but not about wiping. You should wipe everything-system, then cache, then delvik cache-not exactly in that order (make SURE there IS a backup just in case). Load the rom AND flash the correct image file with adb. Also, many roms when FIRST loading up sit a long time before they start up, not sure if nos does this or not-I have been jumpy about the time sitting with a few roms when waiting was all I needed to do. I have had different Viper versions on a few times and moving to another rom was quirky each time I did so, not sure why.
NOS did that to me too. Just wait....it will load into the setup wizard. I think being s-on, which I still am...twrp isn't able to back up and restore your roms boot.img. just a guess but I to failed to restore a backup when an install went awry. Makes sense to be being that you can't install a kernel from recovery either.
Sent from my HTC6435LVW using xda app-developers app
Ajj915 said:
NOS did that to me too. Just wait....it will load into the setup wizard. I think being s-on, which I still am...twrp isn't able to back up and restore your roms boot.img. just a guess but I to failed to restore a backup when an install went awry. Makes sense to be being that you can't install a kernel from recovery either.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I looked at the install instructions for nos, if you are s-on you need to do one extra step. You have to extract the rom into a folder somewhere to get the image file, copy the image file from it. Flash that image file using adb on your pc and THEN install the rom from your phone with goomanager. Without the image file loaded, I don't think it would work. If you are s-off this step is not needed.
rootntootn said:
I looked at the install instructions for nos, if you are s-on you need to do one extra step. You have to extract the rom into a folder somewhere to get the image file, copy the image file from it. Flash that image file using adb on your pc and THEN install the rom from your phone with goomanager. Without the image file loaded, I don't think it would work. If you are s-off this step is not needed.
Click to expand...
Click to collapse
I get that. I'm purely talking about after a full while that I'm not sure if twrp will restore the boot.img from a nandroid. S-On of course.
Sent from my HTC6435LVW using xda app-developers app
Ajj915 said:
I get that. I'm purely talking about after a full while that I'm not sure if twrp will restore the boot.img from a nandroid. S-On of course.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
I believe it will, if it had the image from the get go. I believe that the back up has everything it needs. At least my back ups have never needed an image file. I decided I should try NOS myself and must say it would not go for me (S-off) it kept rebooting into recovery. I was going to try and also flash the boot image but have not done so yet.
---------- Post added at 10:10 AM ---------- Previous post was at 10:08 AM ----------
rootntootn said:
I believe it will, if it had the image from the get go. I believe that the back up has everything it needs. At least my back ups have never needed an image file. I decided I should try NOS myself and must say it would not go for me (S-off) it kept rebooting into recovery. I was going to try and also flash the boot image but have not done so yet.
Click to expand...
Click to collapse
Oh yeah, and I restored my back up and that works just fine
rootntootn said:
I believe it will, if it had the image from the get go. I believe that the back up has everything it needs. At least my back ups have never needed an image file. I decided I should try NOS myself and must say it would not go for me (S-off) it kept rebooting into recovery. I was going to try and also flash the boot image but have not done so yet.
---------- Post added at 10:10 AM ---------- Previous post was at 10:08 AM ----------
Oh yeah, and I restored my back up and that works just fine
Click to expand...
Click to collapse
Its the kernel in NOS. Flash NOS and then flash cpalmers kernel. Then reboot and do the setup and if you want to change to the zarboz kernel you need to delete system/bin/thermald or rename it to thermald_old.bak
Sent from my HTC6435LVW using Xparent Red Tapatalk 2
Hmmm well I did everything via my cell (been the way I've been flashing ROMS unless something goes wrong then I use ADB on computer) and everything when properly done works fine using Flash GUI APP love that app! I've flashed super charged hatka 320 (used that for a couple weeks) then switched over to viper...both using Flash GUI I tried using NOS but yes no dice loaded up but when I pull the unlock ring for whatever reason the splash screen comes up and it won't budge from there....and as for my original question haha TWRP did not work for me when restoring it tripped out like if it was missing the boot image (done that before so I'm familiar with that behavior haha)
Oh and I'm still S-on
Sent from my HTC6435LVW using xda app-developers app
CharliesTheMan said:
Flash the new Nos build, and flash cpalmers kernel after the Rom install and then reboot.
Sent from my ADR6425LVW using Xparent Red Tapatalk 2
Click to expand...
Click to collapse
That's what mine does too......just wait til the notification light turns orange and you will be all set......be patient.
canemaxx said:
That's what mine does too......just wait til the notification light turns orange and you will be all set......be patient.
Click to expand...
Click to collapse
Really? After it boots up? That's odd but ok I'll give it a shot again but probably tomorrow will post here again if it doesn't work....thanks everyone for responding. I'm out at the moment and need cell to be functioning hahaha just in case
Sent from my HTC6435LVW using xda app-developers app

Categories

Resources