I need help i just traded on craigslist for a att samsung galaxy note and its rooted. I dont know what he used to root it etc. Please help me. Here are what is shows in settings:
Model Number: SGH-I717R
Android Version: 2.3.6
Baseband Version: t989UVKID
Kernal Version: 2.6.35.11
Hand Crafted by: Saurom Projekt Team
Build Number: RC_IV
My software update doesnt work and i cant really get any data(what you use to get stuff from the internet not data from the phone). Please help me get this phone back to stock pleaseee! I know nothing about androids so please help me )
If I cant get my 4g data back can you give me instructions on how to install a new RAM or whatever it is to get my data back? Thanks so much!!!!
Welcome to xda.
First and foremost your in the wrong section. If you traded for att galaxy note, this section is for the unlocked international galaxy note.
Start here.
http://forum.xda-developers.com/forumdisplay.php?f=1493
Welcome to XDA Devlopers, but you have posted in the wrong forum. I will move this to the I717 Q&A for you. Good luck
Moved To I717 Q&A
zacharyXD said:
I need help i just traded on craigslist for a att samsung galaxy note and its rooted. I dont know what he used to root it etc. Please help me. Here are what is shows in settings:
Model Number: SGH-I717R
Android Version: 2.3.6
Baseband Version: t989UVKID
Kernal Version: 2.6.35.11
Hand Crafted by: Saurom Projekt Team
Build Number: RC_IV
My software update doesnt work and i cant really get any data(what you use to get stuff from the internet not data from the phone). Please help me get this phone back to stock pleaseee! I know nothing about androids so please help me )
If I cant get my 4g data back can you give me instructions on how to install a new RAM or whatever it is to get my data back? Thanks so much!!!!
Click to expand...
Click to collapse
ZacharyXD, which carrier are you using this on? Looks like you have the KID modem installed, which works on T-Mobile (and possibly others) but it's not an AT&T modem.
jmacdonald19 said:
ZacharyXD, which carrier are you using this on? Looks like you have the KID modem installed, which works on T-Mobile (and possibly others) but it's not an AT&T modem.
Click to expand...
Click to collapse
Well its an i717r...so its a Rogers branded note. Definitely check out the stickies.
Sent from my SAMSUNG-SGH-I717 using XDA
thanks for the replies it really makes me feel better im not totally doomed! Somehow i am on a stock firmware and i still am only getting edge connection i used some picture guide on the internet but i think im still rooted. I am using this note on at&t. And im still on the same android version as i stated above. Thanks for answering i appreciate it so much!
If you're on AT&T. Go to the third post of this thread for the AT&T modem.
Then there is some research to do on your part to learn how to flash it in cwm recovery.
Or in this thread is an odin flashable version as an alternative flash method.
Again some research on your part is needed to learn how to use Odin.
studacris said:
Or in this thread is an odin flashable version as an alternative flash method.
Again some research on your part is needed to learn how to use Odin.
Click to expand...
Click to collapse
i have a little bit of experience on odin but he says you have to copy and paste that stuff into it? im seriously the biggest noob at this and i have no idea how to do any of it. i used odin to install a stock operating system but im still getting edge data? if you could help me step by step i could maybe pay you.
No. The link up top is the Odin.tar to flash with Odin.
Open Odin
Click on the pda slot
Choose modem.tar
Place phone in download mode
Connect to pc
When you see a com port hit start
Profit.
Those instructions in the thread are how to yank the modem off the phone itself in the first place.
And below that, how to push one in with adb. without using Odin.
Thread closed
You have a more extensive thread here - do not double post.
Related
I apologize if I did not find the answer I needed on your forum threads I did do a little searching but I cant seem to find an easy way to Root my SGS2 version 2.3.6 KK6. Can someone direct me to the right page and or tell me how if their is no current post. Also what guide should I follow if I want to install APK files on my phone like Modern Combat 3, and so on. Please help me and again I apologize for being a total NOOB! tnx!
Also is there any general driver or anything I should download to my computer I was using ADB commands with my samsung captivate but now I upgrade to the SGS2. Also my battery dies in about 4 hours of constant use and I usually have no apps running unless im on the phone and i was wondering if any roms your might recommend or market place apps to help with my battery life. The phone is pretty much still stock besides the update to 2.3.6 thanks for any help or insight...Tnx Again!
read:
http://forum.xda-developers.com/showthread.php?t=1103399
Flash:
http://download.chainfire.eu/54/CF-Root/SGS2/CF-Root-SGS2_XW_OXA_KK5-v5.0-CWM5.zip
STOP!
You are in the US? Are you an AT&T? Did you get your Galaxy SII directly from AT&T?
If you answered yes to all these questions, you are in the wrong forum. You either have an SGH-I777, or an SGH-I727 (Skyrocket).
Do NOT follow the directions or flash anything in those links above posted by golcheck. (no offense, golcheck)
If you have an I777, the damage would have been minimal. Things just would have been weird, capacitive keys may have been mapped wrong, etc.
If you have an I727, the damage would have been severe. That phone has a completely different CPU/GPU combo.
EDIT: check the label under your battery. That will have a definitive model number there.
I have a phone directly from att with the latest update from them. Which is 2.6.35.7 i just now seen. I just want to be able to install apks thats all, will these threads help? Also thank you so much for your heads up, and its a samsung i777
ferls1985 said:
I have a phone directly from att with the latest update from them. Which is 2.6.35.7 i just now seen. I just want to be able to install apks thats all, will these threads help? Also thank you so much for your heads up, and its a samsung i777
Click to expand...
Click to collapse
Yup, you're in the wrong place. Go to the I777 forum. I linked it in my post above.
Thanks for replies. I'm not from States and I'm not using AT&T. It's pure Samsung version.
Best regards,
MCC
mcc666 said:
Thanks for replies. I'm not from States and I'm not using AT&T. It's pure Samsung version.
Best regards,
MCC
Click to expand...
Click to collapse
What? This isn't your thread dude.
Sent from my GT-I9100 using XDA App
sorry - too early for me
my baseband version i9100gxxkl4
kernel 2.6.35.7 [email protected] #2
can you guide me to the right file i need to root it
using gingerbread
i have sgs2 gt-i9100p
i dont know from i starts
i need some kernel ,CWM, Custom ROMS
here is the information on my sgs2
Model Number--------- GT-I9100P
Android Version-------- 2.3.5
Baseband-------------I9100PXXKI3
Kernel Version---------2.6.35.7-I9100PXXKJ4-CL664063 [email protected] #2
build number----------GINGERBREAD.xxkj4
You trolling?
I thought u have cm9 on ur phone?
If u don't know i9100 = i9100P+NFC
You can flash i9100 roms on it
So uts mran can flash any thing on gt-i9100p which is for gt-i9100 like kernel rom etc
Thanks buddy
Sent from my GT-I9100 using XDA Premium HD app
NOMIOMI said:
So uts mran can flash any thing on gt-i9100p which is for gt-i9100 like kernel rom etc
Thanks buddy
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Yup
Did someone luckily got i9100P?
because i9100P have nfc
If u flash roms of i9100(that excludes nfc files use this thread to re-enable NFC on i9100P):http://forum.xda-developers.com/showthread.php?t=1407808
Hey there
I'm fairly new to rooting and I was using this guide:
cnet.co.uk/mobile-phones/how-to-root-your-samsung-galaxy-s2-50004972/
but I cant seem to find the kernel that is "similar" or "close to" as mine. I am currently on exact same stats as above:
Model: GT-I9100P
Android Version: 2.3.5
Baseband V: I9100PXXKI3
Kernel V: 2.6.35.7-I9100PXXKJ4-CL664063 [email protected] #2
Build Number: GINGERBREAD.XXKJ4
also I seen people mentioning NFC which I have no idea if my phone has or not, but I do know I purchased it off O2 on "contract", I was wondering if I could still root my phone and which kernel would be SAFE to use
I am willing to speak via Skype (British) to have someone walk me through the procedure if that makes anyone's life easier.
thank you for any feedback :cyclops:
- Sol
thesoldja said:
I'm fairly new to rooting and I was using this guide:
cnet.co.uk/mobile-phones/how-to-root-your-samsung-galaxy-s2-50004972/
but I cant seem to find the kernel that is "similar" or "close to" as mine. I am currently on exact same stats as above:
Model: GT-I9100P
Android Version: 2.3.5
Baseband V: I9100PXXKI3
Kernel V: 2.6.35.7-I9100PXXKJ4-CL664063 [email protected] #2
Build Number: GINGERBREAD.XXKJ4
also I seen people mentioning NFC which I have no idea if my phone has or not, but I do know I purchased it off O2 on "contract", I was wondering if I could still root my phone and which kernel would be SAFE to use
I am willing to speak via Skype (British) to have someone walk me through the procedure if that makes anyone's life easier.
thank you for any feedback :cyclops:
- Sol
Click to expand...
Click to collapse
NFC, just google the meaning came with your phone.
Don't follow just any root my phone tutorial on just any site. If you mess up with your phone, those guys can't help you.
The is the easiest way to root your phone, You don't even need to flash any kernel.
good luck
Jokesy said:
NFC, just google the meaning came with your phone.
Don't follow just any root my phone tutorial on just any site. If you mess up with your phone, those guys can't help you.
The is the easiest way to root your phone, You don't even need to flash any kernel.
good luck
Click to expand...
Click to collapse
im sorry but i read through that post and got totally lost, i do not see any sort of structure explaining my situation - nor did i find anything to do with the i9100P-XXKJ4 model - which is what im trying to find the correct kernel for =/
the Cnet guy seems the most simplest way to me, if only i had a kernel that i was sure would work - i would have a rooted sgs2 by now.
thesoldja said:
im sorry but i read through that post and got totally lost, i do not see any sort of structure explaining my situation - nor did i find anything to do with the i9100P-XXKJ4 model - which is what im trying to find the correct kernel for =/
the Cnet guy seems the most simplest way to me, if only i had a kernel that i was sure would work - i would have a rooted sgs2 by now.
Click to expand...
Click to collapse
What have you done?
You edited your post and made mine look stupid.
Anyway, now that your are still running gingerbread.
Check out CF-ROOT thread under original android development section on this forum, look four your kernel version, and follow the instructions there.
Simple
Swyped from my Galaxy SII
hi there, please i'll be thankful if you could help me installing arabic read and write to my new at&t samsung sgh i777 ... i searched in the forum ad found some threads like
http://forum.xda-developers.com/showthread.php?t=1292841
but my phone does not meet the prerequisites bcz my PDA ends with uckk6 and it says make sure it ends with UCKH7 ...
my phone details is
m.number : samsung sgh i777
andriod version : 2.3.6
bassband version : i777uckk6
kernal version : 2.6.35.7
build number : gingerbread.uckk6
Just use Odin to flash that firmware
Sent from my SGH-I777
122ninjas said:
Just use Odin to flash that firmware
Sent from my SGH-I777
Click to expand...
Click to collapse
THANK YOU SO MUCH it worked fine for reading the arabic text and I installed the GO keyboard for writing, I was afraid that it will corrupt my firmware but you encouraged me, and it runs good ... only sometimes brings application not responding -force close- but I'm OK with it, but will be nice if there are some ways to get rid of it??
The instructions in the firmware were probably written before AT&T put out the first Gingerbread update. I remember that thread about arabic in the development section when the phone was first released.
creepyncrawly said:
The instructions in the firmware were probably written before AT&T put out the first Gingerbread update. I remember that thread about arabic in the development section when the phone was first released.
Click to expand...
Click to collapse
creepyncrawly: you mean the error msg maybe from the version mismatch??
ciemo87 said:
creepyncrawly: you mean the error msg maybe from the version mismatch??
Click to expand...
Click to collapse
I was making an assumption without really knowing. Assumptions can get you into trouble sometimes, because they are often wrong.
I was assuming that the installation instructions were written before UCKK6 was released. But it may be that it is not fully compatible with UCKK6, and that is why the FC's. But on the other hand, maybe it caused FC's on UCKH7, and the version is not an issue. Or maybe you just need to reinstall it, or wipe and reinstall it... or...
I shouldn't really be posting or talking about this because I have absolutely zero experience with it.
creepyncrawly said:
I was making an assumption without really knowing. Assumptions can get you into trouble sometimes, because they are often wrong.
I was assuming that the installation instructions were written before UCKK6 was released. But it may be that it is not fully compatible with UCKK6, and that is why the FC's. But on the other hand, maybe it caused FC's on UCKH7, and the version is not an issue. Or maybe you just need to reinstall it, or wipe and reinstall it... or...
I shouldn't really be posting or talking about this because I have absolutely zero experience with it.
Click to expand...
Click to collapse
no problem your zero experience does helped in fact .. because I have minus experience I just had the device a month ago and just started to get familiar with it ... today I decided to download ICS 4.1 but don't know weather it is supporting arabic or not?? you can help me if you can because I'm still junior member and can't look up everywhere, as i don't know much about the forum yet .. thanks in advance
I belive AOKP has it. There are 2 languages there that looks Arabic.
Do a full wipe and flash.
Read all the OP
http://forum.xda-developers.com/showthread.php?p=24275279
Sent from my SGH-I777 using xda app-developers app
Hi, My names Drew, and I just recently joined xda to tinker around with my phone and explore the possibilities that the manufacturers apparently didn't want us to have. I have had my phone for quite a while and I felt it was time to play with it some more. I am have the Samsung Galaxy S2, it is StraightTalks version of it, here are the details on it found through the about-phone.
Firmware: 2.3.6
BasebandVersion: S720C.01 VLI02
Kernel Version: [email protected] -55 #2 PREEMPT Wed Sep 12 10:20:26 KST 2012
I was not sure of which information was needed to get a insecure kernel version, as I could not find anything specifically geared to my phone on these forums. I was unable to directly post on the developers thread due to my low post count (which I would hope should soon get higher as time moves on). So basically, to the point, what insecure kernel should I use since I am a first time rooter? I understand everything here in this thread: http://forum.xda-developers.com/showthread.php?t=1125414 except for step two when it's talking about kernal versions.
I moved your question to a new thread in the proper forum where someone can help you out.
mikef
XDA Senior Moderator
mikef said:
I moved your question to a new thread in the proper forum where someone can help you out.
mikef
XDA Senior Moderator
Click to expand...
Click to collapse
Ah ok sorry about that, I just saw the Feel free to ask questions here thread and thought it was ok to post in that one for this specific question. Thanks for moving it though, I might get some help if it is in the right forum.
xConflicx said:
Hi, My names Drew, and I just recently joined xda to tinker around with my phone and explore the possibilities that the manufacturers apparently didn't want us to have. I have had my phone for quite a while and I felt it was time to play with it some more. I am have the Samsung Galaxy S2, it is StraightTalks version of it, here are the details on it found through the about-phone.
Firmware: 2.3.6
BasebandVersion: S720C.01 VLI02
Kernel Version: [email protected] -55 #2 PREEMPT Wed Sep 12 10:20:26 KST 2012
I was not sure of which information was needed to get a insecure kernel version, as I could not find anything specifically geared to my phone on these forums. I was unable to directly post on the developers thread due to my low post count (which I would hope should soon get higher as time moves on). So basically, to the point, what insecure kernel should I use since I am a first time rooter? I understand everything here in this thread: http://forum.xda-developers.com/showthread.php?t=1125414 except for step two when it's talking about kernal versions.
Click to expand...
Click to collapse
I am not sure(gb is old school) but your kernel version isn't exactly shown, and your current kernel already kinda looks like a insecure kernel, I suggest that you dial *#1234# check the pda info and since the kernel usually matches the firmware(pda) version get one kernel according to that.
Edit: Safer thing to do would be to upgrade to JB and rooting it(which is fairly easier I think).
Sent from my GT-I9100 using xda app-developers app
king_below_my_lord said:
I am not sure(gb is old school) but your kernel version isn't exactly shown, and your current kernel already kinda looks like a insecure kernel, I suggest that you dial *#1234# check the pda info and since the kernel usually matches the firmware(pda) version get one kernel according to that.
Edit: Safer thing to do would be to upgrade to JB and rooting it(which is fairly easier I think).
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
Ok I dialed *#1234# and I get a verizon operator saying this. "Welcome to Verizon wireless. Your future/feature? update could not be completed. Please try your call again". JB = Jellybean? How do I update my phone to that, I tried to do a system update and it says my phone's already up to date.
xConflicx said:
Ok I dialed *#1234# and I get a verizon operator saying this. "Welcome to Verizon wireless. Your future/feature? update could not be completed. Please try your call again". JB = Jellybean? How do I update my phone to that, I tried to do a system update and it says my phone's already up to date.
Click to expand...
Click to collapse
Just get a stock jb operating system from sammobile and flash via Odin, there are a lot of threads that cover those matters, read stickied threads, it's a really easy and simple procedure, just be careful not to make mistakes (like suddenly flashing pit files).
Sent from my GT-P6200 using xda app-developers app
king_below_my_lord said:
Just get a stock jb operating system from sammobile and flash via Odin, there are a lot of threads that cover those matters, read stickied threads, it's a really easy and simple procedure, just be careful not to make mistakes (like suddenly flashing pit files).
Sent from my GT-P6200 using xda app-developers app
Click to expand...
Click to collapse
I went on sammobile, and looked through their firmware list and mine was not even on there. So that brings me to my next question, since mine is a straight talk phone, and is NOT on the list, is there a possibility that my phone will be bricked flashing a stocked jb operating system to it?
xConflicx said:
I went on sammobile, and looked through their firmware list and mine was not even on there. So that brings me to my next question, since mine is a straight talk phone, and is NOT on the list, is there a possibility that my phone will be bricked flashing a stocked jb operating system to it?
Click to expand...
Click to collapse
What do you mean by "straight talk" is it some kind of network operator, and are you using some kind of network unlocked device (I am asking because you mentioned Verizon), I will tell you one simple thing though if your device model( as given in the about phone - >model number) is GT-I9100 then it's safe to flash any i9100 JB firmware (especially since you're on GB) if the phone gets sim locked or something you can use the unlock apps available here or in the playstore to unlock it.
Sent from my GT-I9100 using xda app-developers app
When people mention US carriers the first question you ask is:-
'The sticker on the phone chassis, under the battery; what does it say ?'
MistahBungle said:
When people mention US carriers the first question you ask is:-
'The sticker on the phone chassis, under the battery; what does it say ?'
Click to expand...
Click to collapse
To the OP, what he ^^^^^ said.
Sent from my GT-I9100 using xda app-developers app
AFAIK, it is SGH-S959G (Service provider's -Straight talk and Net10)
Sun90 said:
AFAIK, it is SGH-S959G (Service provider's -Straight talk and Net10)
Click to expand...
Click to collapse
It was actually SCH-S720C, sorry I was being a busybody on android area51, I managed to solve my own issue and root my phone. With all the trouble of trying to figure out which insecure kernel I needed to flash, I found out that my phone is actually the Samsung Proclaim, even though I have never heard my phone be called that before. And yes it was Straighttalk, its like Net10. Sorry to leave everyone who replied since my last reply hanging, I have been very busy lately. Thanks for replying on my thread to help me out.
i just installed a rom and forgot to back up the stock rom completly and i want to go back. how would i do this? My phone is the samsung galaxy s3 thru straight talk (sprint towers) Help please if you can.
kyler032 said:
i just installed a rom and forgot to back up the stock rom completly and i want to go back. how would i do this? My phone is the samsung galaxy s3 thru straight talk (sprint towers) Help please if you can.
Click to expand...
Click to collapse
Your phone's the SPH-L710, amiright? Download one of the firmwares from this page (I recommend going with the latest one on 4.1.2). The firmware file is going to be rather large (maybe around 1 Gigabyte). Once it is complete, download Odin from here, and you can find a simple explanation on how to use it here. You're going to have to extract the .tar (or .tar.md5) file in the firmware .zip you downloaded earlier. That .tar.md5 goes under 'one package' in Odin. If you have any questions or you are unsure of anything, don't proceed until you understand it all. You can seriously mess up your device if you make a mistake. Feel free to PM me all your concerns and questions. I'll help.
Download firmware related to your model number from samfirmware.com and flash it using odin
Sent from my GT-I9100 using Tapatalk 4
okay
okay well my model number is actualy SCH-S960L and i looked for it on both websites and neither has firmware for the model?
kyler032 said:
okay well my model number is actualy SCH-S960L and i looked for it on both websites and neither has firmware for the model?
Click to expand...
Click to collapse
maybe this will help http://forum.xda-developers.com/showthread.php?t=2357703