Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
sry for the fast answer i didn't read correctly,
i just edited this for those who dont know what im talking about,
did you try to flash to stock, your not using a stock rom as i can see in the picture
cabloomi said:
I'M NOT HOLD RESPONSAPBLE TO ANYTHING THAT HAPPENS TO YOUR PHONE
BY FOLLOWING THIS GUIDE YOU AGREE TO THE TERMS
HERE THESE ARE STOCK ROMS, WHAT YOUR USING IS NOT EVEN FLASH ABLE VIA ODIN (I THINK)
1. DOWNLOAD OLD BOOTLOADER
2. FLASH OLD BOOT LOADER BY
1. OPEN ODIN
2. CLICK BOOTLOADER BUTTON AND CHOOSE THE RECENTLY DOWNLOADED BOOTLOADER
3. TICK PHONE BOOTLOADER UPDATE
4. THEN CLICK START
>>>>PROBLEM SOLVED<<<<
Click to expand...
Click to collapse
Dude... he has an SII HD LTE. (E120L) Which has different CPU/SoC/GPU than the I9100.
I am about 95% certain I9100 firmwares will NOT WORK on his phone, and may, in fact, make his situation worse.
---------- Post added at 11:28 AM ---------- Previous post was at 11:15 AM ----------
vdbergh said:
Hello everyone
I have a SII E120L with
Kernel: 2.6.35.11-120L.EL22.1023
Baseband: E120L.EL.0843LT
with the following problems:
- I can' t connect to a network
- I can't enter download mode.
I tried:
- upgrade via Kies: get your device does not support uipgrade via Kies
firmware version: E120LKRFB05/E120LKRFB05/E120LKREL21/E120LKREL21 (LGT)
- usb dongel to enter download mode: doesn't work
- when I connect the usb cable; and do the 3 button procedure when the green battery appears, then I can enter download mode, but the screen turns blank aftyer 2 seconds. I can see in Odin that the USB port is detetected but flashing results in an error (see pic1)
- I tried adb shell reboot download. This results in the download mode, but disapears after 2 seconds.
- I tried to root the device via DooMLoRD tootlkit but this results in an error:
failed to copy 'files\Superuser.apk' to '/system/app/./Superuser.apk': Read-only file system
I'd would like to be able to
- flash new firmware
and/or
- root the phone and so I can restore an efs.img file on the sdcard.
Can someone help me please?
Click to expand...
Click to collapse
First off, do NOT follow that guy's advice above, unless you want to brick your phone.
Second, try reading/searching this thread. I myself did a quick perusal of it and found that someone in it mentioned that they were able to root their E120L or S by flashing Tegrak kernel. Search around for it.
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
ctomgee said:
@vdbergh, sorry, I noticed you already posted in that other thread.
About your issue; are you plugged into a mainboard USB port on your computer? Using a USB hub or keyboard passthrough can cause issues. Have you tried different cables? It could be a bad cable.
Click to expand...
Click to collapse
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
vdbergh said:
ctomgee, thanks for the effort to try to help me!
I am connected to the main USB port of my computer. I also changed the cable. Result is the same.
I think something is wrong with the firmware. Here's the history.
I had a perfectly good working phone. Then I wanted to flash the TL1.3. Something went wrong in that process and stupid me, I reseted the phone. Since then the phone was bricked. I tried everything but no success.
I sent the phonbe for JTAG repair. They manage to reanimate the phone, but it was impossible to get a network. All the est worked fine but I could't make phonecalls.
When I started Kies, it said to upgrade the firmware. The kernel upgrade went fine but the baseband upgrate got an error. I had the posibility to do an emergency recovery in Kies, but as soon as I start that, Kies doesn't recognice the phone.
Flashing new firmware via Odin doesn't work eiter.
The only small possibility I see is to restore a backup efs.img I found. But to do that the phone needs to be rooted. I can't do that via Odin so I tried the DooMLoRD tootlkit to root the phone. This doesn't work because I get an error that the filesystem is Read-Only.
Maybe I could root or upgrade the firmware via the recovery mode (apply update from sdcard option)?
So I'm very desperate now. I just don't know what to do anymore.
Click to expand...
Click to collapse
I would get the latest firmware available via CheckFUS. (if you don't know what that is, just google it) Then flash it via Odin. Let's start there.
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
cabloomi said:
Use gingerbreak in my signature, it doesnt even need a computer, just put it on your sd and install it, then let it do it's magic
Click to expand...
Click to collapse
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
vdbergh said:
Thanks for the tips cabloomi...
The checkFus didn't work. ( the SHV-E120L (SII HD LTE) is not in the list).
I tried the Gingerbreak, but I do't think the E120L is supported yet. It run's for ever without rooting the phone
Click to expand...
Click to collapse
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
ctomgee said:
My apologies... I didn't double check to see if the E120L was in Check FUS. Hmm. I'm not sure where you can get stock firmwares for the SHV-E120 series, unfortunately. (at least, on English language websites) Sorry dude, wish I could be of more help.
Click to expand...
Click to collapse
Thanks for your help ctomgee, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
vdbergh said:
Thanks for your help cabloomi, I realy appreciate it.
I manage to root the phone by flashing the Tegrak-Kernel-Build-33-for-SHV-E120L-FB05.recovery.tar and installing the zip file in recovery mode.
I still can't connect to a network and I can't flash new firmware. All the flashing ends with an error that the NAND or amss.bin can't be writen to the phone.
Someoine has an idea what I can try now?
Click to expand...
Click to collapse
Please don't get me mixed up with cabloomi...
Thanks for your help, Ctomgee...
The problem that I couln't enter download mode or root my phone is solved with your help.
I still have a probem with the radio/basebad, but I'll post that in another thread.
Related
Hi all 1st post here and it's already a question so I apologize, , I am pretty new this stuff and recently started messing with my firmware and having a play around. Now the issue I have is I cannot connect the phone to pc by usb at all. I have tried all the usual methods of switching data cables, hard reset, enabled/disabled debugging. The only thing that it does is charge the phone.
On a seperate note, I think my current version of android is corrupt as when i hold down the power button, the only option I get is power off, various other things are not quite right either and would prefer stock to this. The device is rooted using universal androot. If anyone could help me return to stock or change my firmware would be greatly appreciated. Please bare in mind that I am unable to use usb, so kies and odin are just not an option. Many thanks
the information i have is.
PDA: - I5500LUYJP2
PHONE - I5500LUYJP2
CSC: - I5500LAROJP2
The kernal version says
2.6.32.9-perf
tyoon hwang SEP-04 #2
Running 2.2 android
what rom did you put onto it?
Try this one : http://www.madteam.co/forum/development/(release)-motafoca-2-0-9/
Many thanks for the reply, I was a little naive and just downloaded a random linked one Am I able to put the madteams on there just from sdcard?
If you mean install it from sdcard using clockworkmod?
Use this one : http://www.madteam.co/forum/development/(re-release)-motafoca-froyo-2-0-9-rom-clockworkmod-edition/
To be honest, I have been playing with something I know too little about and now i'm trying to fix my mess I have installed rom manager, and applied what i believe to be clockwork mod recovery supplied by rom manager, then added the linked file to my sdcard. When it tries to apply it as an update it says aborted as zip file is bad.
If i could use usb or odin to flash my phone things would be so much simpler, but as it stands I can't seem to do anything with just using the sdcard. I don't know if there is a complete idiots guide to this. But thanks to those who have tried to help so far.
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
culkaran said:
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
Click to expand...
Click to collapse
I don't even get the dialog to connect by kies or mass storage. I plug my phone in and the only thing it does is charge. The computer doesn't even acknowledge there is a device connected, with that in mind i'm certain it is a problem with my phone. Possibly firmware related, or faulty usb phone port I would guess.
Which is why I really hope someone can come along and help with my previous problem of fixing things with sdcard only.
Shady27 said:
To be honest, I have been playing with something I know too little about and now i'm trying to fix my mess I have installed rom manager, and applied what i believe to be clockwork mod recovery supplied by rom manager, then added the linked file to my sdcard. When it tries to apply it as an update it says aborted as zip file is bad.
If i could use usb or odin to flash my phone things would be so much simpler, but as it stands I can't seem to do anything with just using the sdcard. I don't know if there is a complete idiots guide to this. But thanks to those who have tried to help so far.
Click to expand...
Click to collapse
Jordanooo said:
what rom did you put onto it?
Try this one : http://www.madteam.co/forum/development/(release)-motafoca-2-0-9/
Click to expand...
Click to collapse
if you're wanting to use odin to flash, use that rom i said. download both files from the 'full edition' and extract them
culkaran said:
my phone too is not working via usb..i mean not detecting when to flash. Its working fine when in usb mode but when put to downloading mode,the pc dont recon the device..if yu find the solution plz rply .if i get it i will surely answer
Sent from my GT-I5500L using Tapatalk
Click to expand...
Click to collapse
to flash:
1. download kies
2. download odin
3. download your files for the rom
4. put them all into odin
5. turn phone into download mode and connect to pc
6. wait for it to show up on odin
IF, your phone doesnt show up, try uninstalling kies, re-installing it, restarting your computer and try again
I can't use odin, kies, or mass storage. My phone simply won't accept that it is attached by usb, I tried the original samsung data cable, as well as another I purchased new the mount dialog won't open when I attach a usb with the usual option of kies/mass storage so I know it isn't my pc. Everything I have done has been by removing the sdcard and using a card reader to put files on, then back to my phone.
I tried all the linked files so far, tried renaming them to update.zip on my sdcard, when I boot back to recovery and try to update from sdcard it says bad file, or failed. Also tried extracting the files and updating again no good. If there is no other options to force new firmware to install from sdcard I guess it is a new phone time which I wasn't keen on.
Should be a rom.problem..flash other rom..if odin shows yellow light below com port in odin it means you are ready to go..flash another rom and see if it helps..but if yellow light doesnt display theb its data cable prob or usb port prob..
Sent from my GT-I5500 using Tapatalk
Shady27 said:
I can't use odin, kies, or mass storage. My phone simply won't accept that it is attached by usb, I tried the original samsung data cable, as well as another I purchased new the mount dialog won't open when I attach a usb with the usual option of kies/mass storage so I know it isn't my pc. Everything I have done has been by removing the sdcard and using a card reader to put files on, then back to my phone.
I tried all the linked files so far, tried renaming them to update.zip on my sdcard, when I boot back to recovery and try to update from sdcard it says bad file, or failed. Also tried extracting the files and updating again no good. If there is no other options to force new firmware to install from sdcard I guess it is a new phone time which I wasn't keen on.
Click to expand...
Click to collapse
So you already have clockworkmod installed?
Jordanooo said:
So you already have clockworkmod installed?
Click to expand...
Click to collapse
I used universal androot and I used an app called 'rom manager' which says it installs clockworkmod recovery. i havnt ever used odin to install.
sorry, i have been away. how did you install clockworkmod when our phone isnt supported by rom manager yet?
Jordanooo said:
sorry, i have been away. how did you install clockworkmod when our phone isnt supported by rom manager yet?
Click to expand...
Click to collapse
It may not have installed correctly which is how I managed to ruin my phone, but according to rom manager it did install I never got the chance to check tho as my phone is now dead and hoping to get it fixed under warranty.
you probably installed a version for another phone. If you can, boot your phone into download mode and install clockworkmod found here: http://www.madteam.co/forum/development/(development)-ltsecret-projectgt/
Then, hopefully your phone should be ok, but just to be sure, install the latest cyanogenmod (using clockworkmod).
Hope this helps
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
CurtisAndroid5 said:
Hello, I was attempting to flash Clockwork Mod on my G5, whilst doing it Odin crashed and now my phone is messed up.
It will turn on but a PC-Triangle with a ! in the middle-Phone, it will go into Download Mode but Odin doesn't recognise it so i can't re-flash it, any ideas?
Please help, this is urgent.
The phone itself is on stock, it turns on but displays the error i have described above, it will go into download mode but Odin doesn't recognsie it.
Thanks, Curtis.
Click to expand...
Click to collapse
No need to worry about it.
Uninstall the drivers associated with the phone. Are you using Windows?
For XP: Go to start > Control Panel > System > Click on the Hardware tab and then Device Manager. Find the driver for the phone. I remember it has a yellow icon, and the drivers name is a mix of capital letters
It's probably similar for Windows 7, but i wouldn't know.
Uninstall the driver associated with the phone, then reinstall by plugging your phone into the computer in download mode. It would help to uninstall and reinstall Odin as well, just in case.
If you get Odin to work, just work away like you would.
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
CurtisAndroid5 said:
Thanks for your reply, i have uninstalled the drivers, but when i plugged my phone back in, the drivers are not being installed and i can not find them on the internet. Any ideas?
I know how i messed up, i completely forgot to root my phone before i started to flash, any ideas on how i can just get my phone back to its normal working everyday self?
Will i just need to get the device recognised by Odin then insert the Ops file and the I5500.tar file and flash it back to stock?
edit- managed to get drivers installed, now how do i fix my phone? Just flash the .OPS and the stock I5500.tar file?
Click to expand...
Click to collapse
I think it'll fail again if your phone isn't rooted. You can't get rid of the Computer-Caution-Phone image without succesfully using Odin.
You could try to flash the .tar and .ops file again. I can't see it working though unfortunately.
Any ideas then? Is there a way to root my phone via Odin or anything?
CurtisAndroid5 said:
Any ideas then? Is there a way to root my phone via Odin or anything?
Click to expand...
Click to collapse
I've never heard of rooting your phone through the download mode or through Odin.
Maybe there's a file you can put on your phone through Odin which doesn't require root? I'll take a look around for you.
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
CurtisAndroid5 said:
Thank you so much, i appreciate it, I'm 16, can't really live without a phone especially with college parties coming up in the next few days aha, I knew i shouldn't of risked around with flashing again!
Click to expand...
Click to collapse
Just thinking that Odin is a program which requires root so there won't be any file you can transfer when unrooted. I had a quick glance over at the Odin thread, and the first step is that you have to root your phone.
I'm sorry, but there's nothing else I can think of which might help. Maybe if somebody with a bit more knowledge/expeerience sees this thread, they might help.
Can Odin detect your phone?
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
I don't know of any others, but Superoneclick works fine for the Galaxy 5. Like I said, I've never heard of using it during download mode so just be careful with that.
If Odin detects your phone, have you tried just closing Odin and plugging out the USB safely?
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
CurtisAndroid5 said:
Can't use Superoneclick as my phone isn't in USB Debugging and i obviously can't change that aha I have just tried that, no luck with the closing Odin and unplugging it, should i try installing CWM again or is that a bad idea?
Click to expand...
Click to collapse
It's a bad idea because it just won't work. Odin will crash again.
I don't know what to do I'm afraid.
Looks like my phone is shagged due to my own stupidity, I forgot to root it because my phone was previously rooted and it went back for repairs, then I completely forgot i didnt install Root access -.-
Do you think i can recover my phone or is it well and truly gone?
Well it's not like your phone is bricked or anything. It's just broken a connection to Odin and it won't boot until it's completed.
You could always return it for repairs again. Your warranty might be broken though.
If I happen to come across a DIY fix then I'll post it here.
Thanks for your help mate, i've decided to just send my phone back for repairs, buy a new phone (Probably a Blackberry for BBM and stuff with all my mates), and sell my phone once i get it back.I have gave up on Samsung mobiles.
Thank you.
Did you send your phone alredy? Uncompress the firmware.tar file and unselect "one package in Odin" . On the boot in odin select the boot file of the .tar and run odin. Maybe that will help
Sent from my Galaxy5 using XDA App
Dude have u tryd using samsung kies it might detect it n let u do an emergancy firmware recovery or maybe (a verry unlikely maybe but still a maybe) it will detect the problem and provide u a solution hope this helps.
CurtisAndroid5 said:
Ah man, thanks anyway, yes Odin detects my phone, I'm trying to use SuperOneClick Root on my PC- Do you know any other Root software that works on PC?
Click to expand...
Click to collapse
Hi, had the very same issue as you. Odin crashed just few sec after start. What I did ; uninstalled everything (Odin & files comes with it, KIES). Then restart PC, go to Samsung.com and download latest KIES, when downloaded go to Tools and check for updates. Accept/run them, when done restart PC. Now, read the steps bellow, and see the attached picture.
1. Extract Odin v4.28 and Ops File.zip I5500XXXX.rar
2. Open Odin v4.28,
- Select OPS tab: EUROPA_v1.0.ops
- Make sure Auto Reboot & Protect OPS selected in Option tab
- get this I5500XFJPQ from samfirware.com ( for some strange reason only this package worked!), download, and unzipp to folder called GT-I5500. In to this folder place Odin and ops as well.
- Make sure One Package selected in Option tab
3. Turn off phone, remove battery for 5second, put it back
4. Hold "Volume Down, Center button & Power button" in the same time to enter Download Mode (yellow triangle)
5. Connect to PC with USB cable
6. When the data line and the phone connection is successful, com port shows yellow in Odin
7. Press Start on Odin
8. Waitin & Pray!
9. PASS, its done!
*Hard reset after flashing *2767*3855#
*Check ur Phone Info *#*#1234#*#*
Note: my i5500 was rooted, so if was yours then ok. When pressing buttons you must see an yellow triangle! If you don't see it don't try connect. Remove battery for 3-5 minutes and try again...
Thanks for the replies, I've got my 'broken' phone in its box on my wardrobe, Carphone Warehouse have ordered me a brand new G5 to replace mine, I should get that sometime next week, but I'm buying a HTC Wildfire S pretty soon anyway!
Thanks for your help, I'd rather keep my broken phone well, broke aha.
Have you tried flashing twrp recovery then using cf-autoroot?
It is the 9100zskf4 kernel
USB Debug, non market app ON.
With Odin 1.85, it stucks at zimage when flash PDA with the
CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.tar
http://www.multiupload.com/E7I1O793GV
it stucks at zimage, what should I do?
I wait for it for an hour and nothings happen
Are you sure there are no Kies processes running background when you are using Odin?
sonicpeter said:
It is the 9100zskf4 kernel
USB Debug, non market app ON.
With Odin 1.85, it stucks at zimage when flash PDA with the
CF-Root-SGS2_ZS_OZS_KF4-v4.0-CWM4.tar
http://www.multiupload.com/E7I1O793GV
it stucks at zimage, what should I do?
I wait for it for an hour and nothings happen
Click to expand...
Click to collapse
Disable USB debugging and try again.
Be sure that KIES (and any of KIES' processes) is not running on your PC.
If that does not help, try to use another USB port and/or USB cable.
(Just to check that this is not the cause of the issue.)
If you have still problems with your phone, you may have to flash a stock ROM back to your phone.
You should use the latest, stable and official version, i.e. XWKJ3.
You can get a non-wipe installation in Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278
Just have a look at first post for description and download the Frankenstein version for XWKJ3 from third post.
Good luck !
If I use the Chinese MIUI method for flash the Bootloader, PDA, Phone and CSC
+ Auto Reboot、F,Reset Time
but without using the PIT + re-partition...
http://www.miui.com/a-123.html
since I think the internal memory is very enough for the phone
Would my phone become BRICK or MALFUNCTION?
Thank you very much
could anyone help me? thanks a lot
Are you actually in download mode when trying to flash?
As you mention the "USB Debug" option, it sounds like you're in fully booted up system.
- Power off the phone
- Hold VOLUME-DOWN + HOME + POWER until the download mode appears
Then use Odin
HellcatDroid said:
Are you actually in download mode when trying to flash?
As you mention the "USB Debug" option, it sounds like you're in fully booted up system.
- Power off the phone
- Hold VOLUME-DOWN + HOME + POWER until the download mode appears
Then use Odin
Click to expand...
Click to collapse
yes sir, I am switched on the Debug mode and then switch off to boot into download mode. however, it actually stucks at zimage when flashing...
Does the method I suggest work? Would I brick my phone?
Thanks Man!!
It_ler said:
Disable USB debugging and try again.
Be sure that KIES (and any of KIES' processes) is not running on your PC.
If that does not help, try to use another USB port and/or USB cable.
(Just to check that this is not the cause of the issue.)
If you have still problems with your phone, you may have to flash a stock ROM back to your phone.
You should use the latest, stable and official version, i.e. XWKJ3.
You can get a non-wipe installation in Intratech's Official Firmware thread here => http://forum.xda-developers.com/showthread.php?t=1075278
Just have a look at first post for description and download the Frankenstein version for XWKJ3 from third post.
Good luck !
Click to expand...
Click to collapse
Thank You soo much...! I have being pulling my hair for 2 hours for not getting the rooting done, and Your answer nailed it..
I pressed ctrl+shift+esc and ended all Kies processes, and then I changed USB port, and BAM! The rooting went through..! I also had an USB extender when I failed, so I also connected my SGS2 directly to my PC using only 1 cable.. Anyways, thanks again, AND LONG LIVE THE NOO8$...!! xD
Now I just have another head ache, when rooting, the infamous yelow triangle appeared, and according to the link below, You could get rid of that by flashing and original ROM, but that got rid of my CF Rooting too, I guess.. SuperUsers and CWM was gone, also after an reboot...
Well, that's for another thread, I guess.. ,)
http://www.youtube.com/watch?v=5lxx_yS9Scg
AgentGreenland said:
Now I just have another head ache, when rooting, the infamous yelow triangle appeared, and according to the link below, You could get rid of that by flashing and original ROM, but that got rid of my CF Rooting too, I guess.. SuperUsers and CWM was gone, also after an reboot...
Well, that's for another thread, I guess.. ,)
http://www.youtube.com/watch?v=5lxx_yS9Scg
Click to expand...
Click to collapse
I found out what I did wrong, I found out that I was supposed to flash an original KERNEL after rooting in order to get rid of the triangle, and I was mislead to DL an original ROM.. That's why SuperUsers and CWM disappeared.. After DL and flash of the original stock kernel, it worked like a charm
I used:
XWKI8 Stock Kernel: Download
Password: [email protected]
From this thread with stock ROMS and KERNELs:
http://forum.xda-developers.com/showthread.php?t=1075278
NB!
When rooting / flashing, You may xperience that Your apps / widgets disappears. A reboot will bring them back, so if You wanna play safe, prepare for alot of rebooting when rooting / flashing
Picked this thread up since I'm facing the same problem right now.
I've read enough to know what to do to get it working.
But there's something that I don't dare to do right now.
I don't dare to just kill odin and disconnect the usb cable.
Anyways I'm stuck at zImage and nothing is happening.
Can I just disconnect the usb cable without getting a brick?
Quick answers would be appreciated by the way, since I'm messing with a friends device right now :silly:
Updating SuperSU app as suggested through CWM by clicking link on the app. Phone rebooted and stuck at "Samsung". Cannot get into recovery (Power and Vol */- ). Can get into Download to but my SG2 hasn't been able to connect to a PC for a long long time (yeah, switched ports, batteries, cables, and PC's). Doesn't appear that phone wants to charge either. Usually when turned off during charging the battery is partially green and below the battery the dots light up. Now when off and charging battery is gray and rotation swirl doesn't swirl....frozen too. Phone was working without any problems prior to updating the binary (other than not connecting to PC).
Any suggestion appreciated.
SG2 SHH-I777
Rooted with Framaroot
SHOstock3
The remedy is to flash stock and start over. If you have a bad usb port in the phone, then you probably need to replace that and get usb working so you can flash from Odin. Or send it to a reliable repair shop like Mobile Tech Videos.
I have read a few posts that associate Framaroot and loosing PC connection/usb mass storage on the I77. Any insight on that?
318mph4me said:
I have read a few posts that associate Framaroot and loosing PC connection/usb mass storage on the I77. Any insight on that?
Click to expand...
Click to collapse
I havn't seen anything about that. Have you read anything about how to fix it? Is this issue supposed to affect hardware or firmware?
Anyway, this should have nothing to do with whether Odin will see your phone. Have you tried to enter download mode with Odin open on the desktop? You need to have "USB driver for Samsung Phones" installed on the pc in order for Odin to recognize the phone when you enter Download mode.
The Framaroot developer responds to this question. I don't understand the inference but maybe you can simplify it for me.
http://forum.xda-developers.com/showthread.php?p=43507992#post43507992
You have brought up the changes in firmware since 4.0 to system property /data/property/persist.sys.usb.config. I needed to fix the string but didn't know how. Was on to do list.....procrastination killed my phone.....bummer.
http://forum.xda-developers.com/showthread.php?t=2488186
And I can't find the other thread with the post about loosing usb with Framaroot but you gave a thumbs up in this thread (not the specific post). The topic was Framaroot and you were recommending using the apk.
Also, another I777 had the same problem (bootloop) with the SU update( #4327)
http://forum.xda-developers.com/showthread.php?t=1538053&page=433
By the way, if I can get a computer, ODIN, usb cable and my phone to cooperate, what firmware you recommend I download?
Thanks for your time
318mph4me said:
By the way, if I can get a computer, ODIN, usb cable and my phone to cooperate, what firmware you recommend I download?
Thanks for your time
Click to expand...
Click to collapse
I'd suggest you flash back to the latest stock, ucmd8, unless you are reluctant to use framaroot. Otherwise you could use the stock UCLL6, 4.0.4 plus root package. See the links in my signature. I assume you want something rooted so you can use Mobile Odin to install a custom kernel with CWM recovery, and then flash the firmware of your choice.
I looked at those links, but I didn't find the developer's response. Not enough information to respond to, but interesting to know.
As far as /data/property/persist.sys.usb.config, that is a text file. As long as you have root access, you just open it in a text editor and change the text string, then save the file and reboot.
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
I am curious could i perhaps flash the csc for tmobile then maybe my dev settings let me unlock bootloader like tmobile variant? I am not certain but I feel like it could possibly
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
two559 said:
Any luck with that ? ? I bought this phone on Valentines Day with android 5.1.1. The first thing I did was download Your stock firmwares cuz I knew it was gonna be a start of another journey with another Samsung device with lil to no development for it. Been doing research daily since then, You've been the most helpful & informative for Our cricket variant of the Grand Prime.
Click to expand...
Click to collapse
Ya I am working on a few things but, honestly its going to be tough if I do happen to figure out a way for custom recovery xda forums will know first.
Helllo
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
edyrod84 said:
I have a G530AZ, Itried to flash it with odin and it bricked. The phone doesn't turn on...not even in download mode....What can I do??. Can anyone help me...
Click to expand...
Click to collapse
If I doesn't turn on at all. Then it's bricked. To make sure. Switch the battery or charge it. If it still doesn't turn on there is nothing you can do. But if you can get into Odin and download mode. There is hope and I have the files you'll need to salvage it.
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
EvilDoer360 said:
Has anyone had any luck rooting this damn SM-G530AZ (5.1.1) ?? I've tried numerous methods and suggestions but so far this thing just won't give in....
Click to expand...
Click to collapse
I rooted mine a while back, do you still need assistance?
i need some help, is there any custom recovery i can install for this phone?, cause i wanted to install the rom in this thread with flashify but i can't do it: http://forum.xda-developers.com/gran...285mb-t3415560
Layman instructions?
I just want to root my phone so that I can save whole apps on my sd card to free up so much space.
I'm just a layman though and have no idea what's being talked about or what the files are that you're sharing. I would really appreciate step by step layman instruction. Thank you so much if you can do that!
toxinburn said:
Okay I have seen various requests so I decided to hook it up, I had to pay for these but here ya go. I have full firmware for lollipop or kitakat and you can get them from the following links to my google drive.
https://drive.google.com/folderview?id=0BxcLJPerShJ_ZDJrNV9fRVBSdU0&usp=sharing
Within you will see two folders you can pick either kitkat or lollipop and to do a full flash download the files starting with ALL then flash with odin by placing in the pda section. The others shouldnt even be needed if your looking just to fully flash the device use the ones that start with the label ALL. Enjoy. Wish someone could get the bootloader unlocked for this variant. If their are any other variants that need firmware let me know ill see what i can do.
Click to expand...
Click to collapse
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
toxinburn said:
their is no bootloader unlock or custom recovery for the 530az that i am aware of, so i never could make a nandroid backup. If you know of a way to actually use a custom recovery etc on the 530az I would make you a backup.
Click to expand...
Click to collapse
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
ya i think you messed up royally, their is no working philz or cwm for the 530AZ at all because the bootloader is locked soooo i dont see how you ever flashed it with that in the first place, but if you indeed were able to then it looks like you have a soft brick of sorts since the bootloader is locked on that model, their is firmware but you for some reason are unable to flash with odin so sadly I am not sure what else you could do other than maybe see if it is recognized on other usb ports or computer also check your device manager in windows and check and see if the usb device is listed if it shows a yellow exclamation or unknown device then manually update the driver for the unknown device as an android device
VickMadrid said:
Hey, do you have a nandroid backup of your device (sm-g530az) that you could give me? My Samsung is dead, odin don?t recognize my device in download mode, only boot in recovery, and I can flash it with cwm. Please, you could help me?
Click to expand...
Click to collapse
Since Odin won't recognize it
Give this a shot
http://forum.xda-developers.com/grand-prime/development/fix-g530-debrick-img-guide-to-make-t3422115
[Edit]didn't realize that comment was so old xD [/Edit]
Help!!
Autolounge said:
I rooted mine a while back, do you still need assistance?
Click to expand...
Click to collapse
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
benash2010 said:
I do! I have the 5.1.1 530AZ and no method for has worked, please let me know what you did.
Click to expand...
Click to collapse
That is the exact model I have so this should work! Use KingRoot but the desktop variant. And if that doesn't work use KingRoot, again the desktop variant. Let me know how it goes!
VickMadrid said:
That´s the history. I recieve the samsung (sm-g530az), but the smartphone don´t connect to wifi, when you choose the network only appear "Saved, Protected". No matter how much times you select the network, always appear the same thing and the device do nothing. Well, i thinked in that moment in change the firmware. I read in this forum a possible solution, that solution says "Download the Samsung Kies, then connect your device and select -upgrade your device-. Type your model and S/N, and Kies does the rest". I did it, everything seemed fine, until the process stopped. And an error message appears that says "Disconnect the phone and retire the battery, then turn on + ^ + home to start the emergency recovery". I did it all, but when i connect it, my pc, odin and kies don´t recognize it, my Samsung died. I put the phone in download mode and nothing happens. I reinstall the driver, kies and everything and odin at last recognize my device. Then I dowloaded "Philiz Touch Recovery" and I could flash it with odin. After all, I clean my device and prepare it for a custom rom. I installed it "cyanogenmod 12.1 unofficial", but when restart the device, it doesn't enter to the system, only boot in recovery or bootloader. But my pc don´t recognize my device in download mode, and I can´t flash it with odin. So I need the backup to restore my device.
Try to install "Philiz Touch Recovery" with Odin. I did it, and works for me. When I recieved the samsung, i don´t unlocked the device and I could flash the CWM. Thanks for your response
Click to expand...
Click to collapse
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command.
Let me know
apk
Sorry for the file "CROM_Service.apk" for what?
Hey I need that!
Kangrito said:
Hello, I know is late. Is already 2017 happy new year. But i was looking the post and reading the thread. I'm looking this information to try on my friend phone that want to root. Anyway. I maybe have a solution to fix the bootloop. since you went to philz recovery. There is a bug with philz recovery. If im correct. But i got it fixed with some zip file and using command on that flash. If you still need this solution let me know. I can post the zip file and step by step of the command./
Let me know
Click to expand...
Click to collapse
HEY I REALLY NEED THAT!
I don't have the actual CWM on my phone yet. I just got it today. I already have it rooted, deodexed, and debloated(somewhat).
I was able to root it using kingroot. I'm still working for a way to replace the newest kingroot(5.1.0) with SuperSU.
But my question is does it actually work? Have you flashed the tar with odin and fix the code in it with commands.
Just reading your post gives me chills honestly. I like doing things as soon as I can! I'm a phoneaholic.