I already root and load superuser on my AT&T galaxy note i717, before root i can get 4g signal but only Edge after the root, how can i fix this ?
hmm. that shouldn't have happened. what method did you use??
toucan203 said:
hmm. that shouldn't have happened. what method did you use??
Click to expand...
Click to collapse
Exactly this steps only for root with the stock rom :
http://forum.xda-developers.com/showthread.php?t=1586223
and then install superuser app
Did you check the apn settings
Sent from my SAMSUNG-SGH-I717 using xda premium
lbroller said:
Did you check the apn settings
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
It is exactly the same as AT&T use, do you recommend that i make a recovery from my original stock room and start again ?, if i make a recovery to my stock rom it remains rooted or i need to root again ?
Hi it seems you have the T-Mobile radio antenna installed. I'm still a noob at this but look at my post called "flash Samsung galaxy note i7i7 back to at&t" towards the end of the comments they'll be talking about a att-stock-odin-antenna or something around those lines just download it and no need to unzip/extract it and you should have 4g GPA/lye back on your note also you need Odin which I assume you have.
2nd edit: also this doesn't clear your root/flash only the antenna is updated
Sent from my SAMSUNG-SGH-I717 using XDA
zacharyXD said:
Hi it seems you have the T-Mobile radio antenna installed. I'm still a noob at this but look at my post called "flash Samsung galaxy note i7i7 back to at&t" towards the end of the comments they'll be talking about a att-stock-odin-antenna or something around those lines just download it and no need to unzip/extract it and you should have 4g GPA/lye back on your note also you need Odin which I assume you have.
2nd edit: also this doesn't clear your root/flash only the antenna is updated
Sent from my SAMSUNG-SGH-I717 using XDA
Click to expand...
Click to collapse
Just for the records, i´ll be able to fix the problem flashing again the original AT&T stock radio at :
http://m-s-j.net/dagnarf/phone-odin-att-stock-radio.tar
I´m using this i717 with the original AT&T stock rom rooted with original stock radio from AT&T in Telcel mexico with no problems at all, for some reason the original radio can´t recognize the Telcel signal as 3g/4g, just reload the radio again from the link above and everything works fine now !, Thank you every one, specially zacharyXD !
Related
Hey guys I asked Bell Mobility about an official upgrade for the Galaxy s2. But, I got nothing from them. They just told me to either contact Samsung or to contact a phone number they gave me. But I'm almost positive everyone else I call will give me similar replys. So if you guys know anything please post!!
I wouldn't bother waiting for Bell to push an update.
Sent from my GT-I9100 using XDA App
SaneinOne said:
I wouldn't bother waiting for Bell to push an update.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Darn... well I tried to flash my s2 but problems occured (such as application error forcing me to leave the application and a pop-up would show, or random shut downs). This made me to flash back to the stock Bell firmware, but even after that there seems to be some problems and also the bootloader logo is now changed to a i-9100 logo instead of a i9100m logo. Please help. I did follow all the instructions that were given in the threads to flash but I guess I messed something up.... Any ideas?
what firmware do you have? ugkg2?
skiflyer said:
what firmware do you have? ugkg2?
Click to expand...
Click to collapse
Yes thats the current firmware I have but I would like to change it to a 2.3.5 since theres the battery problem. But what I dont understand is why am I having new problems everytime I flash?
Hey guys do you have any suggestions????
Try CheckROM v4 and the SpeedMOD kernel. Seems to work great with my Bell sgs2.
Sent from my GT-I9100M using XDA App
cholywell said:
Try CheckROM v4 and the SpeedMOD kernel. Seems to work great with my Bell sgs2.
Sent from my GT-I9100M using XDA App
Click to expand...
Click to collapse
I'm not sure.. I might want to send the phone in for repair. There seems to couple of problems that reappears even after reinstalling firmware.. so... I'm not sure. I just want to know how to install a firmware that would make everything work correctly on my galaxy; within the warrenty limits.
Check here for a thread along the name of "how to update bell galaxy s2 to 2.3.5" it explains everything.
Sent from my GT-I9100 using XDA App
Aincalandorn said:
Check here for a thread along the name of "how to update bell galaxy s2 to 2.3.5" it explains everything.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
I already did that but my galaxy is messed up even more.
InStake said:
Darn... well I tried to flash my s2 but problems occured (such as application error forcing me to leave the application and a pop-up would show, or random shut downs). This made me to flash back to the stock Bell firmware, but even after that there seems to be some problems and also the bootloader logo is now changed to a i-9100 logo instead of a i9100m logo. Please help. I did follow all the instructions that were given in the threads to flash but I guess I messed something up.... Any ideas?
Click to expand...
Click to collapse
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Idan73 said:
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Click to expand...
Click to collapse
Yep I tried everything.
1) download the firmware I want to use.
2) check kies and all of its applications are closed
3) turn phone off
4) take sim and memory card out
5) get it to download mode and insert usb
6) turn on odin and input all the downloaded files
7) start the odin program
8) once everything is downloaded and loading is complete on the sgs2 take the usb port out
9) finished!
These are the procedures I take.
Anything missing or should I correct?
And also, how do you change the bootloader?
PLEASE HELP.
And what other ways can Samsung detect that I flashed???
InStake said:
Hey guys I asked Bell Mobility about an official upgrade for the Galaxy s2. But, I got nothing from them. They just told me to either contact Samsung or to contact a phone number they gave me. But I'm almost positive everyone else I call will give me similar replys. So if you guys know anything please post!!
Click to expand...
Click to collapse
Dont waste your breath with them, Bell have the Worst customer service of all the carriers
Just update with guide in XDA here
DrewVL said:
Dont waste your breath with them, Bell have the Worst customer service of all the carriers
Just update with guide in XDA here
Click to expand...
Click to collapse
That sucks............ why Bell.. why..
Is there a way to put the phone to the way it was when it came out of the box. ie: have the normal bootloader and firmware?
Idan73 said:
If you want logo back then flash bell kernel and I do a full wipe. Your i9000m will be back. Actually if you had followed flashing instructions properly you would not have problems with 2.3.5 or 2.3.6 either.
You obviously need to learn more but here is a free tip. Don't even dream sending it for service to bell with i9000 logo! Or any traces of flashing. You would be better of if it was dead. That is unless you like to pay for out of warranty repairs.
Sent from my GT-I9100
Click to expand...
Click to collapse
Also, do you use the Frankenstein version or the normal version?
InStake said:
Is there a way to put the phone to the way it was when it came out of the box. ie: have the normal bootloader and firmware?
Click to expand...
Click to collapse
Do a factory reset. Then flash the orignal Bell firmware, kernel, modem and CSC. Downloads are listed in this thread. If you want to send it in for repair then you will then need to buy a $5 USB jig off ebay to reset the custom ROM counter before sending in for repair.
cholywell said:
Do a factory reset. Then flash the orignal Bell firmware, kernel, modem and CSC. Downloads are listed in this thread. If you want to send it in for repair then you will then need to buy a $5 USB jig off ebay to reset the custom ROM counter before sending in for repair.
Click to expand...
Click to collapse
So there is no other way to reset the counter right? And could you give me alink of a trustable one?
I was reading in the tmobile galaxy note android development section of xda that someone has successfully flashed a stock T-Mobile note ROM image (rooted) and modem to our Att model.I attempted it but got stuck on the glowing Samsung symbol.Luckily i had a nandroid backup to restore to.Just curious if anyone has tried it on this model and been successful.
Sent from my SAMSUNG-SGH-I717 using xda premium
CJ225 said:
I was reading in the tmobile galaxy note android development section of xda that someone has successfully flashed a stock T-Mobile note ROM image (rooted) and modem to our Att model.I attempted it but got stuck on the glowing Samsung symbol.Luckily i had a nandroid backup to restore to.Just curious if anyone has tried it on this model and been successful.
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yes, I have installed both. I uninstalled the T-Mo modem, as I found the Blaze ICS modem worked better for me.You need to try various modems and pick the one that is best for you. But I still have the T-Mobile rom. I like the wifi calling, it works well.
Can anyone link to these? I'd like to try the Tmo rom.
there is more involved than just flashing the rom/modem if you want it done right. There is a great thread in the tmobile GNote forum explaining how to do it. You have to flash the tmobile img file. I consistently got 6-9mb speeds but the real benefit is being able to use the wifi calling. Weird thing was that in order to get back to the i717 setup I had to revert back to stock, the re-root and flash twrp all over again. Only took a few minutes but just know that that is what it takes.
http://forum.xda-developers.com/showthread.php?t=1837907
Sent from my SGPT12 using Tapatalk 2
That's what I did I flashed the stock IMG with odin then went back into download mode and flashed the boot.IMG then went into twrp and installed the the uvg3 radio from the thread.The T-Mobile android splash screen came up then the little android that blasts off but then it just hangs on the glowing Samsung logo....does it take a long time to boot?Maybe I'm just not being patient enough because as far as I can tell everything flashes and installs OK
Sent from my SAMSUNG-SGH-I717 using xda premium
CJ225 said:
That's what I did I flashed the stock IMG with odin then went back into download mode and flashed the boot.IMG then went into twrp and installed the the uvg3 radio from the thread.The T-Mobile android splash screen came up then the little android that blasts off but then it just hangs on the glowing Samsung logo....does it take a long time to boot?Maybe I'm just not being patient enough because as far as I can tell everything flashes and installs OK
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
I had this same problem. I gave up. I'm running Black Star with the Blaze modem and everything is working fine for me.
I get er05 sim card error for wifi calling
I am running stock tmobile on the i717 and everything works very well except the wifi calling. I get the er05 invalid sim error. My sim is tmobile sim... . How can I get the wifi calling to work?
Not responsible for damaged phones, use at your own risk!
I installed the Stock rooted T Mobile rom by Scrosler posted here:
http://forum.xda-developers.com/showthread.php?t=2459677
After flashing that rom from recovery, I used Scrosler Stock loki'd ATT boot img found here:
http://forum.xda-developers.com/showpost.php?p=45755689&postcount=3
After booting, you have to setup an ATT APN. I used this one found here:
http://forum.xda-developers.com/showpost.php?p=41717915&postcount=9
APN settings are found under System settings / tethering & networks / mobile networks / access point names / "menu soft key" new apn. Be sure to save when done.
After this you have a completely functioning T Mobile rom with theming for the home launcher on your ATT D800
Of course build prop will need to be changed to ATT settings, but will work as is.
Thanks to Scrosler for all the need files and his time to do this!
Edit, you can load the build prop from clean Rom 1.1 to get it back to ATT.
Screenshots
Sent from my LG-D801 using Tapatalk 4
Note Att in drop down shade.
Sent from my LG-D801 using Tapatalk 4
the S3 were interchangeable rom between ATT and tmobile, this doesnt suprise me but good post.
Does this also Enable tmobile aws hspa bands?
Not sure what issues Scrosler was having porting it over then. I think I'll wait for his port though, CleanROM is just running too well for me to make a change.
supersain08 said:
Does this also Enable tmobile aws hspa bands?
Click to expand...
Click to collapse
i might try this out myself. don't know what it does for the bands, but i unlocked my at&t G2 when i first got it and i've been able to get T-Mobile 4G and 4G LTE service with my T-Mobile SIM. coverage and speeds are not as good as at&t in a few spots.
@op - what other benefits (if any) have you seen with the T-Mobile ROM? thanks.
The roms are basically the same, however the T-Mobile Rom has launcher theming built in. Hopefully in the future this will help developers build for more than one carrier.
Sent from my LG-D800 using Tapatalk 4
Any adverse affects of running this ROM? You have me tempted just to have themes and the option to opt out of carrieriq.
Sent from my LG-D800 using xda app-developers app
Is there anything you can change specifically to get themes working on the at&t variant without flashing a whole new rom?
Sent from my LG-D800 using XDA Premium 4 mobile app
None that I noticed!
Sent from my LG-D800 using Tapatalk 4
I tried flash T Mobile ROM to my at&t g2 but after TWRP did its thing it then went straight into fastboot mode on its own and now I am stuck with no way out and you please help me
willdogg78 said:
I tried flash T Mobile ROM to my at&t g2 but after TWRP did its thing it then went straight into fastboot mode on its own and now I am stuck with no way out and you please help me
Click to expand...
Click to collapse
looks like you forgot step 2 in the original post (flash the att loki'd boot image). reboot to recovery using the hard keys (see this post for steps, copy the att loki'd boot image to your phone and flash with TWRP and you'll be good to go. or, you can restore your backup from TWRP (assuming you made a backup).
thank you so much I am back in to recovery and flashing my nandroid backup. I am going to give this another try but want to just clarify that I am doing it correctly. If I understand properly I need to flash the T Mobile firmware. where I need the clarification is do I just simply put the boot image as the second file to flash so that they flash one after another, instead of what I tried the first time which was to flash the firmware first then go back into recovery and then flash the boot image which is what screwed me up first time. Does this sound like I have it under control this time
Why did you do this? The only plus so far I see is you got rid of the att on the left top corner?
willdogg78 said:
thank you so much I am back in to recovery and flashing my nandroid backup. I am going to give this another try but want to just clarify that I am doing it correctly. If I understand properly I need to flash the T Mobile firmware. where I need the clarification is do I just simply put the boot image as the second file to flash so that they flash one after another, instead of what I tried the first time which was to flash the firmware first then go back into recovery and then flash the boot image which is what screwed me up first time. Does this sound like I have it under control this time
Click to expand...
Click to collapse
yes, that's what i did. flashed the ROM and the boot image one after the other.
good news!! I have the ROM up and running the only thing left to do is the new APN setting for AT&T but the file you indicate to use is the same exact file for step 2 am I missing something? Also if that is the right file do I just simply flash it like normal, or is there a different method to apply it? thanks again for all of your help sorry to be a pain in the butt
jordant2 said:
Not sure what issues Scrosler was having porting it over then. I think I'll wait for his port though, CleanROM is just running too well for me to make a change.
Click to expand...
Click to collapse
IM porting. This is not a porting. What I am doing is a but more complex than flashing another ROM and changing the boot image.
colbyfink said:
Is there anything you can change specifically to get themes working on the at&t variant without flashing a whole new rom?
Sent from my LG-D800 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Nope, I can post a launcher later, I have them working fine on my AT&T G2 running CR 1.1
Also, just an FYI, you can use the Korean version and the Verizon version as well...
But on the Verizon version the kernel is built to read the sensors different and you will need to swap the kernel modules because of this.
Also, you can swap the APN file too before you flash and yo wont have to worry about APN's.
Just sayin....
Oh and one other thing...
I accidentally deleted the boot.img so maybe OP can upload it please?
Otherwise I will make a new version when I get home.
Did anyone know that you can load up a T-Mobile rom on the Verizon Note 3 using Safestrap. I was able to boot it up on my phone with T-Mobile sim and it works.
Does gps work? And does it work with Verizon network? If not, irrelevant for 98% of us.
Sent from my SM-N900V using xda app-developers app
akellar said:
Does gps work? And does it work with Verizon network? If not, irrelevant for 98% of us.
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
I second this. Is DE users might have to flash the boot or the kernel Beans posted after flashing a T-Mo rom or else we will get booted into Odin. Waiting to see if we can get fully working data before I try this
Sent from my Dev Edition Note 3
Well... All tmobile roms are have aroma installers. Which we can't run because ss doesn't currently support it. I wanted to try this before. @JrGomez15
Sent from my SM-N900V using Tapatalk
yes they will run tmobile roms/kernels/recoveries etc. now remember i am on a dev with fully working twrp so dont try an aroma flash on a regular device with ss. but since tmobile note 3 bootloader is also unlocked same as developer edition that is why they work together
oneandroidnut said:
yes they will run tmobile roms/kernels/recoveries etc. now remember i am on a dev with fully working twrp so dont try an aroma flash on a regular device with ss. but since tmobile note 3 bootloader is also unlocked same as developer edition that is why they work together
Click to expand...
Click to collapse
It wouldn't be a big deal to try to flash a tmobile rom to a virtual partition in safestrap because it's sandboxed away from precious system files.
Sent from my SM-N900V using Tapatalk
It shouldn't be limited to TMo ROMs, should be able to flash ROMs from any Note with the same processor. It was the same with the S4.
Gonna try doing this I use a Verizon note3 on tmobile
Sent from my SM-N900V using xda app-developers app
Probably already known, but I have tried a few modded apks from the t-mobile theme section and flashed them with flash Gordon and they work great.
Sent from my SM-N900V using xda app-developers app
mbh87 said:
It shouldn't be limited to TMo ROMs, should be able to flash ROMs from any Note with the same processor. It was the same with the S4.
Click to expand...
Click to collapse
I tried a sprint note 3 rom. Wonder why it didn't work. It should.
Sent from my SM-N900V using Tapatalk
I flashed two T-Mo ROMs n get data on neither. Maybe we need to flash something after installing the rom or change apn settings
Sent from my Dev Edition Note 3
You need to flash the radio i believe
Sent from my Verizon Galaxy Note 3 Developer Edition
keynith said:
You need to flash the radio i believe
Sent from my Verizon Galaxy Note 3 Developer Edition
Click to expand...
Click to collapse
Where can we get that at? The Jedi rom looks very nice n I wanted to run that for a day or two
Sent from my Dev Edition Note 3
xXJay_RXx said:
Where can we get that at? The Jedi rom looks very nice n I wanted to run that for a day or two
Sent from my Dev Edition Note 3
Click to expand...
Click to collapse
Here is a link to the newest MJ7 modem flashable via Odin http://forum.xda-developers.com/showthread.php?t=2524572
Jedi ROM was my ROM for the Note 2 for at least 6 months straight without any ROM issues that I can remember...fastest TW kernel(named Saberkernel)/ROM configuration I have ever ran over time
also @ptmr3 is a very active helpful developer and i have donated to him for all of the above
Yea I'm about to try to flash Jedi with that modem but now I'm a bit afraid since we already have one Dev Edition user who bricked his phone. I'm afraid I'll be next lol
Sent from my Dev Edition Note 3
xXJay_RXx said:
Yea I'm about to try to flash Jedi with that modem but now I'm a bit afraid since we already have one Dev Edition user who bricked his phone. I'm afraid I'll be next lol
Sent from my Dev Edition Note 3
Click to expand...
Click to collapse
Back up your EFS before you flash anything. I am not sure if there is an EFS backup tool for Note 3.
cyberbrutus said:
Back up your EFS before you flash anything. I am not sure if there is an EFS backup tool for Note 3.
Click to expand...
Click to collapse
TWRP does this I think. When I back up my rom, it asks if I wanna backup my modem, boot and efs. I had already flashed a T-Mo rom. It just wouldn't get any data. I don't think flashing the radio would do anything. I'm still hesitant tho
Sent from my Dev Edition Note 3
xXJay_RXx said:
TWRP does this I think. When I back up my rom, it asks if I wanna backup my modem, boot and efs. I had already flashed a T-Mo rom. It just wouldn't get any data. I don't think flashing the radio would do anything. I'm still hesitant tho
Sent from my Dev Edition Note 3
Click to expand...
Click to collapse
You have to change APN settings I think.
I had a week old S4 and messed with APN settings and radios. I bricked it beyond repair..IMEI and ICCID were all messed up too. I had no choice but sell it and get a Note 3. I tried flashing stock roms, factory images but it was broken. I was told if I had EFS backup I could have revived it.
---------- Post added at 03:41 PM ---------- Previous post was at 03:37 PM ----------
Try this app and see if you get the data.
https://play.google.com/store/apps/details?id=ale.android.apnmanagerwithanimation&hl=en
tigga117 said:
Gonna try doing this I use a Verizon note3 on tmobile
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
I am also using a tmobile sim and im able to get 4g working up to 32 mb down 9 up by turning on band 4 setting up the apn
I was trying to change the modem from verizon on the the t mobile rom and i messed up the system. I couldnt even use odin to return to stock. I was able to just install the modem in odin after and fixed it. With the rom i can connect to tmobile even have the wifi calling showing good but it keeps disconnecting.
Aroma roms will not install because safestrap on verizon note isnt set up for it.
I am currently running a G900A (AT&T branded galaxy S5 with locked bootloader) i am in the process of buying a used S5 but not sure if the bootloader is locked. Here is the phone info that the guy provided to me.
Sm-g900f , g900fxxu1anc9 , 4.4.2
Like i said I'm on AT&T S5 so i am not familiar with the F models and i know T Mobile is the T models but didn't know if anyone knows anything about these phones cause I'm wanting to flash some T Mobile roms. Any info would be much appreciated.
Is it rootable through towel root? Can i use TWRP or CWM with this device. It is carrier unlocked and he is using it on T mobile (gsm) so I'm guessing it will work on AT&T since they uses GSM as well. Thanks for any help.
That's the international version. So should be fine. I'm not sure about lte bands.. U will have to check that info out. The phone should work fine though.
The g900f is probably the most desired s5.. As its not carrier branded.
If I had to choose one I'd get either it or the g900t (T-Mobile)
Sent from my SM-G900T using Tapatalk
adam_ky said:
That's the international version. So should be fine. I'm not sure about lte bands.. U will have to check that info out. The phone should work fine though.
The g900f is probably the most desired s5.. As its not carrier branded.
If I had to choose one I'd get either it or the g900t (T-Mobile)
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Ok thanks. I got lucky and found it for $200. The only thing that worries me is that since it's not carrier branded can they report it stolen in any way after i buy it and have the IMEI blacklisted. Normally I'd just meet at the phones carrier store and have everything documented but not sure how to go about it without it being carrier locked.
I'm not sure about that. You can ask for the imei number and check it on swappa.com
If it comes back clean that may alleviate some of your worries
Sent from my SM-G900T using Tapatalk
Well i finally found me a G900T. Gonna pick it up around 5 today. Can't wait to see what version is on it so i can get it rooted and find me a good rom to go along with it. Any recommendations?
Muniz stock rooted and debloat a bit if you want stock touchwiz. Or.. If you want more plain android, aosp, try cm12.1 currently in nightly stages but I think its stable enough for daily driver.
Some ppl like twisted Lolipop....
Sent from my SM-G900T using Tapatalk
Ok thanks. I'll check them out
adam_ky said:
Muniz stock rooted and debloat a bit if you want stock touchwiz. Or.. If you want more plain android, aosp, try cm12.1 currently in nightly stages but I think its stable enough for daily driver.
Some ppl like twisted Lolipop....
Sent from my SM-G900T using Tapatalk
Click to expand...
Click to collapse
Ok i got the phone, so now onto rooting. Do i need to take it down to 442 to root it can i root straight from 5.0 thanks for the help getting me started
U can root from there.
Find a guide. Make sure you use proper files. (Measure twice cut once)
Do not update to of6 threw normal ota updates or flash the factory of6 firmware as it can't be downgraded I think. If you want to goto the latest which is of6 follow muniz guide
Take your time make no mistakes.
I would recommend installing a custom recovery. Twrp. After that you can easily move back and forth to whatever roms you want, trying different ones.
Sent from my SM-G900T using Tapatalk
The sickness did a thread under general where he explains how to root 5.0. It's using chainfire's root method for 4.4.2. Which also works for 5.0. That's the method I used to root my 900T a few days ago. You flash it in odin.
Sent from my SM-G900T using XDA Free mobile app
ecera said:
The sickness did a thread under general where he explains how to root 5.0. It's using chainfire's root method for 4.4.2. Which also works for 5.0. That's the method I used to root my 900T a few days ago. You flash it in odin.
Sent from my SM-G900T using XDA Free mobile app
Click to expand...
Click to collapse
Yea i found it thanks for the info though. I've got it rooted and twrp installed. Downloading lolliozop right now. I've been wanting to try that one. I'll get the sim unlock code tomorrow from T mobile and should be up and running then.
Well i ran lolliozop for a few days but couldn't figure out a lot of the color issues with the black on black and white on white etc. Great looking rom but i just couldn't figure it out. I'm back on TMS 3.0 now and love it. I'm running the KT kernel but still haven't figured out what to change or a good setting for it. Anyone else running this kernel and could give a little advice on how to set it would be greatly appreciated.