installing cm9 rom when im done installing i get unfortunately.the processcom.android.phone has stopped. i re downloaded. wipe data/factory reset, format system, wipe dalvik cache. help please.
deathbeah said:
installing cm9 rom when im done installing i get unfortunately.the processcom.android.phone has stopped. i re downloaded. wipe data/factory reset, format system, wipe dalvik cache. help please.
Click to expand...
Click to collapse
Full wipe flash ROM twice
Same issue as OP, proposed solution doesn't help
The flash twice method has never worked for me. But what will always work without fail is flashing 3.1, booting into it, reboot to recovery, wipe cache/dalv and flash the newest.
Sent from my CM7ed out Mopho!
Related
Im about to flash bionix-v 1.3.1. And im trying to be as thorough as i can without odining back to stock. Just wanted to double check what im doing is right.
I already backed everything up and disabled voodoo (just for safety). Then, i wiped dalvik cache. Next, do i wipe data/factory reset? Then after that, wipe cache partition? Then after that, flash new rom?
Vibrant, Bionix-v 1.3, Voodoo...
It's in the noob guide..
summary:
factory wipe
wipe data
wipe dalvik (advanced)
flash rom
wipe data
wipe dalvik
reboot
wait 10 minutes, reboot
sign into market, wait 5-10, reboot
restore apps, boom.
Mine is similar to above.
Recovery
Factory wipe
Flash rom
Wipe dalvic
Wipe cache
Fix permissions
Reboot
Wait 10-15
Reboot
Enjoy
This process greatly reduced bugs when flashing rom to rom
Sent from my SGH-T959 using XDA App
I am on 2.3.5 KI3 rooted with stock firmware, I
Reboot in CWM.
Wipe data/factory reset.
Wipe cache partition.
Wipe Dalvik Cache.
Flash MIUI ROM and my phone keep restarting.
What went wrong?
There's a thread about your problem right above your topic here.
Or just try re-flashing. (Or try flashing it twice in a row)
tried, not working
Hi guys.
I am using cm7.1 right now, and i have problem when i flash new cm 7.2
problem is, after i install zip of cm7.2 from sd, reboot, and then, it stuck at ANDROID words. i using cwm5. so, if i need to wipe after install rom,
what kind of wipe?
wipe data/ factory reset?
wipe cache partition?
wipe dalvik cache?
or all of them?
or anything that i miss?
tenkiu
Make only wipe data/ factory (it's include the wipe dalvik cache) and cache.
dragonnn said:
Make only wipe data/ factory (it's include the wipe dalvik cache) and cache.
Click to expand...
Click to collapse
thank you
so, that kind of stuck will happen if we skip the wipe?
vocyber said:
thank you
so, that kind of stuck will happen if we skip the wipe?
Click to expand...
Click to collapse
It's possible to get bootloop when changing rom's, but I have successfully upgrade form CM 7.1 to 7.2 without wipe.
Hello, I just rooted, and then tried to flash the latest nightly onto my P500H from Koodo.
Now whenever I boot, it's just stuck in the spinning arrow. At first it resets the boot but after 1 or 2 tries the arrow will just get stuck.
I can get into clockworkmod recovery, but there is error message saying: Bad boot message "recovery".
Now, first time I did this I didn't wipe cache partition, but then I did wipe it but same thing happens.
Any ideas?
Did you wipe Data?
Sent from my LG-P500 using xda premium
When you change ROM or kernel, you have to wipe, at least, cache and dalvik cache.
Since I wipe data most of the times, I don't know if Gingerbread 2.3.7 can handle data from 2.3.3, so I would recommend you to try first wiping the 2 caches I mentioned then, if unsuccessful, wipe data.
BTW, this 'bad boot' message on recovery is the same to everyone. I'm no technician on the subject, but you can simply ignore it.
No I only wiped cache partition.
should I also do wipe data/factory reset?
Koraboros said:
No I only wiped cache partition.
should I also do wipe data/factory reset?
Click to expand...
Click to collapse
First you try wiping only cache and dalvik cache. Then, if you're still stuck, you try wiping data.
yuripg1 said:
First you try wiping only cache and dalvik cache. Then, if you're still stuck, you try wiping data.
Click to expand...
Click to collapse
I just wiped all of it and now it boots thanks a lot all.
this is what I do when I flash roms and never have problems, wipe dalivk cache, format cache, wipe data and system in that order...works for me maybe it will work for you
Im currently using ver1.0 Pro but cannot seem to download any other versions after that.
I tried even Infinitum Project, i cant seem to get it pass the start screen.(meaning before the boot animation). Similar when flashing RR ver1.1 onwards
I think i cannot go anywhere after android 4.0.4. I am only able to flash back to v1.0 (Android 4.0.3).
what could be the problem? help?
can u explain the process you followed for the installation of the other roms after 1.0?
oh sorry.
For the RR Pro 1.3
full wipe
installed rom
reboot.
Infinatium project,
Full wipe
installed rom
installed gapps
installed themed gapps
reboot.
I would usually just follow the instructions that are given.
sorry too I were configuring my cellphone, just flashed to the 1.3 and works fine...
sometimes my sd card give me problems and I remove from the device, maybe it's not your case...
and additional to the wipe, I wipe the dalvik cache, and then install the rom.
In the roms in wich I got troubles with the start screen or rebooting its because the baseband (LPQ in my case) and I'm serching foward about these thing...
sorry about my english, but its not my native languaje
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
jonsim86 said:
can anyone please help.
Just tried goin from v1 to v1.1 but after installing all smoothly, they showed a kernel panic.. cant start up my phone. everytime i would just flash
CF-Root-SGS2_XX_OXA_KPA-v5.2-CWM5.tar via odin and then flash it back to v1.0.
flash rom
flash gapps
flash gapps fix
wipe dalvik cache
reboot
Flash update cwm.zip
flash Siyah-v3 kernel
wipe dalvik cache
reboot
flash disable off crt
wipe dalvik cache
reboot
when flashing v1.1
flash v1.1
flash gapps
flash gapps fix
wipe dalvik cache
Reboot
I get Kernel panic. hop?
Click to expand...
Click to collapse
Apart from asking the dev i suggest a full wipe and clean flash may cure the usual Kernel Panic .
jje
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
jonsim86 said:
sorry how do i do a clean flash?
when i installed v1.3, i would do a full wipe, (data, cache partition, and wipe dalvik cache)
but this time instead of pinic kernel, my phone wont even reach boot animation.
Click to expand...
Click to collapse
wipe data,cache,dalvik cache and format system from mount and storage.
after installing also wipe cache and dalvik cache then reboot.hope this solves ur problem.
meaning to say i should delete everything in my storage and sd card? like format the memory?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
formatting system doesn't format ur sdcard data, it only
formats system folder.
sorry im quite a noob so... how do i format the system?
jonsim86 said:
sorry im quite a noob so... how do i format the system?
Click to expand...
Click to collapse
go to recovery mode then mount and storage and select format system.
giving it a try. Thanks
i just cant seem to install anything after v1.
from v1. siyah kernel v3.
did a data wipe
cache wipe
format system
divak wipe
install rom
install gapps fix
reboot
it just get stuck at start up before the bootanimation. why?
jonsim86 said:
meaning to say i should delete everything in my storage and sd card? like format the memory?
Click to expand...
Click to collapse
yeap it just clears the system data, then you can do a clean flash from there. that should do it
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
jonsim86 said:
it just does not work for me. Still just cant get to the boot animation after flashing.
anyone experiencing the same?
Click to expand...
Click to collapse
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Azure Flame Kite said:
I'm having the same problem.. CWM can't properly install any ROM even after all wipes... every ROM install leaves me stuck on boot screen
Click to expand...
Click to collapse
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
MyLifeRocks10 said:
try again by following these steps...
wipe data/factory reset
wipe cache
wipe dalvik cache
format system
install rom
install gapps and gapps fixer
wipe dalvik cache
fix permissions
wipe cache
reboot.
Click to expand...
Click to collapse
If you just relax for a minute , take a deep breath and start from the beginning. Listen to what people are telling you. Follow step by step from the beginning. Read what the developer says on flashing the rom and then it will work. Almost impossible not to get the rom working after that. It will all come together mate. Read a lot of posts. Good luck.
Sent from my GT-I9100 using xda premium