S-OFF DEVICES ONLY
I WILL ONLY SAY THIS ONCE, IF YOU HAVE DATA ISSUES FROM SWITCHING FIRMWARES YOU MUST FLASH THE STOCK RECOVERY AND PERFORM A FACTORY RESET IN HBOOT
DO NOT S-ON THE ENG OR JB HBOOT OR IT WILL BRICK YOUR DEVICE
ANYTHING DONE AT THIS POINT IS YOUR RESPONSIBILITY NOT MINE
So what is this?
Well ill answer that, these are Hboot/Radio/Firmware Combos
What do you do with these?
The purpose of these is avoid performing a full RUU if you would like to upgrade or downgrade firmwares/radios
So why do these include Hboot/radio/firmware files, cant we just flash the radios?
NO, mix and matching all of these has be known to cause data issues. Its best to flash the whole set to prevent data issues
How do you flash these?
Assuming you checked the MD5 sum, just rename these to PH98IMG.zip and place on the root of your external sdcard
New firmware patch huh?
This is simply for those upgrading to ICS firmware on a GB rom Or and ICS rom that had the gingerbread patch flashed over it
Whats the difference between the stock Hboots and the JB/ENG Hboots?
Simply, These Hboots have fastboot commands enabled WITHOUT unlocking the bootloader
I suggest if you use fastboot alot to use these hboots
Thanks to CharliesTheMan i now have a spot on AndroidFileHost
Heres how to tell which file you need
Each file will be named accordingly
[Firmware][Hboot version][JB or Stock hboot][Date of leak if applicable]
So an example would be [GB][2.11][JB]PH98IMG.zip
i suggest you check the MD5 and if you dont know what an MD5 is then you need to research what it is before flashing any of these
Here's the Link: http://www.androidfilehost.com/?a=show&w=files&flid=3054
Thanks to the JuopunutBear Team for getting us S-off, Jcase for the leaked Hboot
Very very nice. Thank you. Flash this and a GB rom, and it's on old firmware.
superchilpil said:
Since i didnt want to run the gingerbread ruu and mess with nandroiding back to get the eng hboot i made this
This is the eng hboot bundled up with the old firmware, you ust use the old firmware patch to run ics roms after flashing this
just place it on the root of your sd card, rename, and reboot to hboot
It will reboot once during the flash this is normal
DISCLAIMER: IT IS NOT MY FAULT IF YOU BRICK YOUR DEVICE DOING THIS, YOU MUST BE S-OFF AND AS ALWAYS CHECK THE MD5 SUM
DOWNLOAD:http://www.mediafire.com/?4i8sfbj74a9xqzb
MD5:10005eafcdc1e242d9d8ed91b7d68210
OLD FIRMWARE PATCH: http://www.mediafire.com/?8v3a2al9129gp9h
Credits go to Jcase for the hboot, and to whom ever made the old firmware patch
Click to expand...
Click to collapse
This is what I've been running by default after s-off. Has been rock solid. Don't think I'll change for now as many are having issues and/or experimenting. I'll just wait and see what people come up with. Great job in doing this...
Sent from my ADR6425LVW using Tapatalk
How's battery life ? Will flash later.
Sent from my ADR6425LVW using xda premium
jclendineng said:
How's battery life ? Will flash later.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
So far I'd have to say it's better, and it nay just be me but everything seems smother overall
Sent from my ADR6425LVW using Tapatalk 2
Thanks man! Set this up with Newts XxX rom and having no problems! I am pretty new to HTC phones coming from a DroidX. How do I know if the ENG installed correctly? I know the old firmware is loaded up right.
ih8mydroid said:
Thanks man! Set this up with Newts XxX rom and having no problems! I am pretty new to HTC phones coming from a DroidX. How do I know if the ENG installed correctly? I know the old firmware is loaded up right.
Click to expand...
Click to collapse
The hboot will say ENG S-OFF near the top.
con247 said:
The hboot will say ENG S-OFF near the top.
Click to expand...
Click to collapse
Con with the answers. Sweet! This works like a charm!
This works perfectly and i do think i notice a slight smoother response on most things then before plus the radios like me again. Awesome job
on a side note : con247 every time i see you post something i look at your speedtest sig and get so jealous and angry at the same time since i cant get anything over 8 mbit upload (and that's business class internet) where im at.... kudos to you and fml lol
jclendineng said:
How's battery life ? Will flash later.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Seems better....and I've been using the phone more lately on 4G....but who knows.
Sent from my ADR6425LVW using Tapatalk
dajmanjt said:
This works perfectly and i do think i notice a slight smoother response on most things then before plus the radios like me again. Awesome job
on a side note : con247 every time i see you post something i look at your speedtest sig and get so jealous and angry at the same time since i cant get anything over 8 mbit upload (and that's business class internet) where im at.... kudos to you and fml lol
Click to expand...
Click to collapse
Kudos to his University's internet connection? Show me what you have at home....
So if we are on ICS, we flash this to get back to GB?
Sent from my ADR6425LVW using XDA
i'm assuming since it's locked but with s-off we need to unlock the bootloader with htc again right? also the patch works but cache still doesnt mount right
retepdgp said:
So if we are on ICS, we flash this to get back to GB?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
This will only downgrade your firmware. Your rom should be left intact. However you will need to flash the GB firmware patch over your rom immediately after doing this or you will have problems. If you want to downgrade android itself, flash a gb rom after doing this or just flash the whole gb ruu
retepdgp said:
So if we are on ICS, we flash this to get back to GB?
Sent from my ADR6425LVW using XDA
Click to expand...
Click to collapse
this is the hboot for gb or ics depending on which rom you are using or about to install. the firmware patch is to fix most mounts if using ics roms
Thanks guys. So IF I also run the Firmware patch (For ICS) would it still work for a GB ROM?
Sent from my ADR6425LVW using XDA
dyetheskin said:
this is the hboot for gb or ics depending on which rom you are using or about to install. the firmware patch is to fix most mounts if using ics roms
Click to expand...
Click to collapse
The firmware patch also fixes an audio lib that causes constant reboots.
I am on stock rooted 2.01 with all original firmware. If I use both of the files is the OP along with one of the ICS roms will everything work correctly? If not what would I need to do? I would prefer to stay on the GB firmware as I have been getting great service, 3g and 4G speeds.
dyetheskin said:
i'm assuming since it's locked but with s-off we need to unlock the bootloader with htc again right? also the patch works but cache still doesnt mount right
Click to expand...
Click to collapse
Seriously.... People when you S-OFF YOU DO NOT HAVE TO UNLOCK YOU BOOTLOADER!!!!! S-OFF = UNLOCKED IS THIS EVERYONE'S FIRST PHONE?!?!?!
Sent from my ADR6425LVW using XDA App
Clay333 said:
I am on stock rooted 2.01 with all original firmware. If I use both of the files is the OP along with one of the ICS roms will everything work correctly? If not what would I need to do? I would prefer to stay on the GB firmware as I have been getting great service, 3g and 4G speeds.
Click to expand...
Click to collapse
If your stock then you don't need to flash the hboot file unless you just want the eng hboot, you could just use cons for that
This is meant to downgrade those who upgraded their firmware to the new ics leak
But if you just want to run an ics Rom with the old firmware then just flash the patch in recovery and you should be good
Sent from my ADR6425LVW using Tapatalk 2
Related
Ok I'm all set now, I got everything flashed, but now I sill have question.
I started with the ENG H boot then I wen to the safer hacked one.
I'm looking for ROMS now and they have a PH98IMG file. Is that the kernel or updated firmware? I wouldn't want to flash different firmware right?
also what about the old firmware patch for ICS roms?
http://forum.xda-developers.com/showthread.php?t=1614180
Do I need to be using that as Im still on the GM H boot?
and finally what about mainver errors? since Im s off will that still warn me?
I just want to be careful not to do anything I shouldn't now that most of the safety nets are gone.
Also sorry of my questions are silly, its late at work and I've been starting at this screen all day. Its time to go.
thanks
loki993 said:
Ok I'm all set now, I got everything flashed, but now I sill have question.
I started with the ENG H boot then I wen to the safer hacked one.
I'm looking for ROMS now and they have a PH98IMG file. Is that the kernel or updated firmware? I wouldn't want to flash different firmware right?
also what about the old firmware patch for ICS roms?
http://forum.xda-developers.com/showthread.php?t=1614180
Do I need to be using that as Im still on the GM H boot?
and finally what about mainver errors? since Im s off will that still warn me?
I just want to be careful not to do anything I shouldn't now that most of the safety nets are gone.
Also sorry of my questions are silly, its late at work and I've been starting at this screen all day. Its time to go.
thanks
Click to expand...
Click to collapse
ROMs generally will never have firmware present unless it specifically states otherwise (perhaps somebody will release one after an OTA if there's a new firmware update). Prior to last week, we all had S-ON (well most of us) so all ROMs came with a script that would dump the boot.img (kernel and RAMdisk) into a PH98IMG.zip, then reboot to bootloader so you can flash it.
Use the old firmware patch for ICS ROMs only if you are on HBOOT 2.11 or lower.
I'm not sure about mainver issues... I don't think they matter now... but if you do get that error there's a simple fix thats been around for awhile.
I am on 2.11 so I would need the patch. Is it ok to use even it I'm not on am ics Rom, should I flash it just in case or wait until I need it.
Yeah I was kinda thinking the same thing about the mainver. Not sure either though
Sent from my ADR6425LVW using Tapatalk
loki993 said:
I am on 2.11 so I would need the patch. Is it ok to use even it I'm not on am ics Rom, should I flash it just in case or wait until I need it.
Yeah I was kinda thinking the same thing about the mainver. Not sure either though
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
The patch is apart of the system so you only flash it when you are going to run a ics Rom based on the ics firmware. You already have the patch files in the Rom you are running if its GB. But when you flash a new Rom the system is wiped which is why you need to flash the patch. I hope I explained that ok.
Sent from my HTC Vigor
Thanks for this thread, answered some of my nagging questions
Andro X said:
The patch is apart of the system so you only flash it when you are going to run a ics Rom based on the ics firmware. You already have the patch files in the Rom you are running if its GB. But when you flash a new Rom the system is wiped which is why you need to flash the patch. I hope I explained that ok.
Sent from my HTC Vigor
Click to expand...
Click to collapse
I understand, its ok. You right though dont know what I was thinking, of course the system gets wiped.
Im debating which ROM to run now. I was going to go with one of the BAMFs, but I also would mind a senseless ROM either.
Is it wrong that I actually kinda like Sense, I just wish it didnt bog the phone at times.
Also I thinking its probably best to say on the 2.11 firmware, that way I can still run GB if I want and go to ICS ROMS too if I want with the patch.
I like sense too especially since this is my first HTC phone so its something different for me. I had Motorola's in the past. I'm on GB firmware with the eng hboot and running ics Clean Rom.
Sent from my HTC Vigor
Well Sense is certainly an upgrade for me from TouchWiz....I miss a few things but overall it is better...
I think you would be happy with CleanROM, extremely fast and reliable ICS build. You would never know it wasn't stock.
I have my own silly question...why do I need htcdev unlocked to get s-off. Just rooted and s-offed my of MT4G for the fun of it. Seems like we should be able to s-off without official unlock support
Sent from my ADR6425LVW using xda premium
Geoi1006 said:
I have my own silly question...why do I need htcdev unlocked to get s-off. Just rooted and s-offed my of MT4G for the fun of it. Seems like we should be able to s-off without official unlock support
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Not sure about MT4G, but I don't think the control bear program can access everything it needs on the Rezound without being unlocked. Just a guess mind you .
Geoi1006 said:
I have my own silly question...why do I need htcdev unlocked to get s-off. Just rooted and s-offed my of MT4G for the fun of it. Seems like we should be able to s-off without official unlock support
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
You have to be rooted to acquire s-off. Up until this point you had to be unlocked to acquire root. Now, if you are s-off you can root without unlocking. It's a vicious circle! Lol!
I just haven't gotten to unlock since I don't have home internet access
Sent from my ADR6425LVW using xda premium
I'm currently rooted and I'm running team viper 1.03. However, I updated previously to the leaked ICS 5-7 firmware which came with some pretty crappy radios for me. I use to get much higher 4g speeds, and I'd like to return to the gingerbread ones. I saw this thread and I was wondering if it was safe to flash these firmwares here:
http://forum.xda-developers.com/showthread.php?t=1614366
There's no mention about s-on anywhere so I'm not sure.
Sorry, you need to be s-off to flash these
Sent from my ADR6425LVW using Tapatalk 2
yeah, you're going to want to use the jbear S-OFFmethod at http://unlimited.io to S-OFF your phone first
weaaddar said:
I'm currently rooted and I'm running team viper 1.03. However, I updated previously to the leaked ICS 5-7 firmware which came with some pretty crappy radios for me. I use to get much higher 4g speeds, and I'd like to return to the gingerbread ones. I saw this thread and I was wondering if it was safe to flash these firmwares here:
http://forum.xda-developers.com/showthread.php?t=1614366
There's no mention about s-on anywhere so I'm not sure.
Click to expand...
Click to collapse
The first line on that thread. - S-OFF DEVICES ONLY
S-OFF was very easy to do and really is worth the few minutes that it takes. Just make sure you download the correct version for your firmware.
mjones73 said:
The first line on that thread. - S-OFF DEVICES ONLY
Click to expand...
Click to collapse
I added that afterwards so don't blame him
Sent from my ADR6425LVW using Tapatalk 2
Damnit man! Just kidding.
OP, sorry about that
Sent from my ADR6425LVW using Tapatalk 2
RUU is up on Android Police's site! Check it out!
http://www.androidpolice.com/2012/08/02/exclusive-download-htc-rezound-ice-cream-sandwich-ruu-for-final-ota-3-14-605-12/
08/12 was month not day
First
Sent from my ADR6425LVW using Tapatalk 2
izzaeroth said:
[ruu] 3.14.605.12 [08/12]
RUU is up on Android Police's site! Check it out!
http://www.androidpolice.com/2012/08/02/exclusive-download-htc-rezound-ice-cream-sandwich-ruu-for-final-ota-3-14-605-12/
Click to expand...
Click to collapse
From the future...
since you posted the OTA almost 3 weeks before the official one, can we expect the kernel source from you soon?
live2die said:
since you posted the OTA almost 3 weeks before the official one, can we expect the kernel source from you soon?
Click to expand...
Click to collapse
I am hoping, but you never know...
Does this have the same hboot as .10?
Any kernel changes?
Sent from my ADR6425LVW using xda premium
"This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off "
Is there anyone who as actually tried this official update w/just having S-Off? I'm not quite daring enough to hop out there and doing it without having someone have mentioned or tried it first. My phone is my business phone, so it will make things difficult having it down for any period of time.
shrike1978 said:
Does this have the same hboot as .10?
Click to expand...
Click to collapse
yes
I was going to ask is this is same version of the leaked we had a couple weeks ago? Or is it an updated version?
jmackin1016 said:
"This will not work if you used the HTC Bootloader unlock tool. Your device must be fully stock with a locked bootloader or you must have S-Off "
Is there anyone who as actually tried this official update w/just having S-Off? I'm not quite daring enough to hop out there and doing it without having someone have mentioned or tried it first. My phone is my business phone, so it will make things difficult having it down for any period of time.
Click to expand...
Click to collapse
What if you are both HTC unlocked and s-off ? Do you have to relock ?
Sent from my ADR6425LVW using xda premium
cbrown245 said:
What if you are both HTC unlocked and s-off ? Do you have to relock ?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
not if ur s-off
izzaeroth said:
not if ur s-off
Click to expand...
Click to collapse
you will still retain unlocked, it will just chg ur hboot to stock and recovery, but just use firmware patch if need be and flash custom recovery
Has anyone flashed this ? How is battery life ? Any improvements with stock kernel?
Sent from my ADR6425LVW using xda premium
cbrown245 said:
Has anyone flashed this ? How is battery life ? Any improvements with stock kernel?
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
ive been running the rom'ed ver and battery life seems about the same. not sure about improvements to kernel. .10 and .12 have same
Any new radios with this RUU??
cowman4000 said:
Any new radios with this RUU??
Click to expand...
Click to collapse
sadly no there isnt
I'm wondering if with s-off and unlocked, but stock 2.11 GB if its possible to get the OTA and what happens if I do take it. I plan to run the RUU and unlock and root that again.
bond32 said:
I'm wondering if with s-off and unlocked, but stock 2.11 GB if its possible to get the OTA and what happens if I do take it. I plan to run the RUU and unlock and root that again.
Click to expand...
Click to collapse
if u run this ruu it will still be unlocked but it will update your firmware to ics and hboot, but just install a custom recovery and root and youre set. it will wipe your data so be sure to use TB
izzaeroth said:
if u run this ruu it will still be unlocked but it will update your firmware to ics and hboot, but just install a custom recovery and root and youre set. it will wipe your data so be sure to use TB
Click to expand...
Click to collapse
Is there any advantage to being on ICS hboot/firmware? I have been flashing roms but I went s-off last night to make the process easier. I suppose I don't mind flashing the GB patch. Thanks for the quick reply
Alright. So I am still on the original GB firmware. I am running RezRom with Sense 4 (obviously an ICS rom) with the GB firmware patch.
I am also S-Off with JuopunutBear's 2.11 HBOOT.
I am looking to upgrade my firmware to maybe the global version 4.03.605.2 and I had my eye on upgrading my HBOOT.
What prerequisites do I need to have completely done before going about these procedures? I also am a bit confused on the firmware upgrade. The instructions seem pretty simple. I keep thinking I am missing something.
Any input would be greatly appreciated.
Thank you all.
bump for anything?
simple... just flash the OTA Released on Android Police.... Just remove from the zip the hboot/recovery and your good to go.
Your good to go man.
Sent from my ADR6425LVW
If you're sticking to the same rom you have now, you'll get no benefit from upgrading your firmware/hboot.
I am definitely going to flash a new rom. Probably the OEM one which is recommended with the new firmware. Is the newest hboot 2.24? Or 2.27.
Sent from my ADR6425LVW using xda app-developers app
996 said:
I am definitely going to flash a new rom. Probably the OEM one which is recommended with the new firmware. Is the newest hboot 2.24? Or 2.27.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
the new is 2.27.
you could nandoid back, but like mentioned you would lose some of the benefits, although you would get the new radios.
Do you recommend upgrading my hboot? Also would I notice an increase in performance maybe?
One more question:
Can I just flash the new hboot over what I have currently? The 2.11?
Sent from my ADR6425LVW using xda app-developers app
996 said:
Do you recommend upgrading my hboot? Also would I notice an increase in performance maybe?
One more question:
Can I just flash the new hboot over what I have currently? The 2.11?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
the RUU will update your hboot automatically.
if you want to run fastboot commands you will need to download the patch update hboot and install after the ruu
996 said:
Do you recommend upgrading my hboot? Also would I notice an increase in performance maybe?
One more question:
Can I just flash the new hboot over what I have currently? The 2.11?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Honestly if there is a new rom you are looking to move to because you like it, just flash the ruu, then flash recovery and install. I wouldn't suggest mixing radio's, hboot versions or you could run into data issues.
thank you guys for the quick replies. I guess I will just flash the RUU and the new recovery and then finally the new rom I want.
If you don't mind me asking...What are your guys' setups? New hboots? S-Off? Roms?
996 said:
thank you guys for the quick replies. I guess I will just flash the RUU and the new recovery and then finally the new rom I want.
If you don't mind me asking...What are your guys' setups? New hboots? S-Off? Roms?
Click to expand...
Click to collapse
I was having 4g/3g switching issues where data would just drop until I toggled data, and was hoping that something in the new radios would help. I ran the ruu, installed recovery then restored to CleanROM DE. Not optimal, but it works and seems to actually improve some performance along with fixing my switching issues. Once a good senseless rom comes out I will jump on that and hopefully take advantage of the new firmware.
TheBr0ken said:
I was having 4g/3g switching issues where data would just drop until I toggled data, and was hoping that something in the new radios would help. I ran the ruu, installed recovery then restored to CleanROM DE. Not optimal, but it works and seems to actually improve some performance along with fixing my switching issues. Once a good senseless rom comes out I will jump on that and hopefully take advantage of the new firmware.
Click to expand...
Click to collapse
Ah. I was actually thinking of going back to Clean Rom DE. That was so far the most efficient rom I have used. Just wish the development was still going on for Clean Roms.
Got the firmware loaded and running successfully.
Thank you all!
I am s-off and unlocked. Do I need to relock before flashing the RUU?
Sent from my ADR6425LVW using xda app-developers app
snowride20 said:
I am s-off and unlocked. Do I need to relock before flashing the RUU?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
If you are s-off, just keep your bootloader UNLOCKED.
This is what I do.
There will be no need to relock to install leaked RUUs.
Also no need to install customized hboot. I keep the stock hboot that was installed by the RUU.
Custom hboots sounds like additional bricking risks and provide zero practical benefits at this time.
It is true that the custom jbear hboots can do more additional fastboot commands, but no developers are using them - not yet.
S-off and htcdev unlocked let's me fastboot flash kernels and recoveries.
regards
Howard
UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound
Support thread for the community
Note: This is the official support thread for my ROM UNOFFICIAL CM10.1 [JB-4.2.2] for HTC Rezound. If you are having trouble and need a little help, this is the place to ask questions. DO NOT post your question in my ROM's thread in the development section. Post them here.
Please consider checking the Frequently Asked Questions section for my ROM first to see if there is an answer for your question. If there is not, then by all means feel free to post your question!
Click to expand...
Click to collapse
Thanks in advance to the users of my ROM who may also help out answering questions that get posted in this thread
Original question
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing.
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Reply
I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot. Don't try that until we can get a better answer though. Lets move this question over to the support thread.
Sent from my ADR6425LVW using xda app-developers app
zkrp5108 said:
K I'm thinking of updating radios and hboot now my radios are 1xxxxxxx and 1xxxxx my hboot though is 2.27 which if I'm not mistaken is the newest one? I know I have asked about this before but if I update will it brick if I am already on the newest hboot or will it not matter? I just want to make sure I know what I'm doing
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
darkghost568 said:
Yep. That's the newest HBOOT.
Click to expand...
Click to collapse
zkrp5108 said:
So how do I go about updating the baseband versions
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
wildstang83 said:
Q6
Click to expand...
Click to collapse
zkrp5108 said:
I understand that's how I do it but is it safe to if I'm already on 2.27 hboot. I'm sorry stang I'm just confused and is just something I remember being a problem from the incredible days.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Like I was saying, I could be wrong but I believe the procedure involves downloading the RUU, opening the zip with an archive manager and just remove everything out of the RUU you do not want to update and then just close the zip, rename it and flash it in hboot.
So if you download the RUU and open it up with an archive manger like 7Zip you can see a bunch of files:
adsp.img
android-info.txt
boot_signed.img
dzdata_16g.hdr
dzdata_16g.img
hboot_8x60-lte_2.27.0000_120803_MR2_signedbyaa.nb0
mdm9k.img
mdmrcdata_3.01_002.img
pg2fs_spcustom.img
radio.img
ramdisk.img
rcdata_1.16.002.img
recovery_signed.img
rpm.img
sbl1.img
sbl2.img
sbl3.img
splash1.nb0
system.img
tp_atmel224e_1101.img
tz.img
I think your supposed to remove everything but android-info.txt and radio.img and just close the zip, rename it to PH98IMG.zip and flash in HBOOT. I'd rather you not do this though until someone gives us a better answer as I rarely mess with radios and such. Things are quite a bit different than what they were on the Incredible.
Right on
Sent from my ADR6425LVW using xda app-developers app
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
rghart09 said:
I have installed a few different JB roms on my rezound and recently after installing this rom my notification drawer is not responding correctly. wWhen pulling down the drawer it stops at the date and the button for the quick settings and it just stays there and the hardware buttons are then unresponsive. Is this a known issue? I searched but didn't find any mention. It does this on any JB rom/kernel I have tried.
Thanks in advance for the help!
Click to expand...
Click to collapse
Hmm, yea that is definitely not normal and isn't a known bug, with this Rom at least. I'm assuming your Rezound is on the very latest firmware and you have followed the install instructions perfectly right? Are you using other kernels with this rom and thats what causing the problem, or does it do it on the stock kernel as well?
EDIT: Also does the bug continue if a different launcher is used like Apex, Nova, Launcher Pro or ADW EX?
I am s-off I am going to do an ruu and see if it is fixed. I have tried multiple Roms including yours ,shrike's, and Neo's, each with the kernel the ROM comes with. I had shrike's pacman for a while and it never had this issue.
Hboot-2.27.00 I'm sorry but where do I find the firmware info? Or does the hboot suffice?
Settings / About phone / Baseband version. Also I asked about the launcher. Does using a different one fix the problem?
Sent from my SCH-I605 using Tapatalk 2
The baseband version is 2.22.10.0801r, 2.22.10.0803r
I installed apex and it acts the same.
Sent from my Nexus 7 using Tapatalk 2
The only other reports I can find related to your issue were caused by defected screens on certain devices. The cause is slight screen lift at the top. The effect would be the Status bar could not be dropped down, could only sometimes be dropped down, or could be dropped down most of the time with a minor issue getting the shade to pull down ever so often. I'd suggest RUUing back to stock and if the issue is still there, send the phone in for repair or replacement.
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
hollisjamison said:
I'm upgrading my firmware and radios as I'm still on a 1.x radio for some reason, and I'm downloading the RUU, checking the MD5 both on my SDcard and it matches, rename it to " PH98IMG.zip", I boot into Hboot and it checks the file for 30-45 seconds, then never asks me to upgrade? Any ideas?
Currently on Hboot 2.21.000 and radio 1.22.10.0310r/1.22.10.0300r. I am S-on but unlocked. Waiting to do this RUU, then S-off, then flash this rom.
Click to expand...
Click to collapse
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
KnightDavid said:
Same thing is happening to me hollis, and I think it's because you're S-on. I saw a blurb somewhere that said to do the RUU you have to either be on the stock ROM or be S-off already.
I'm still S-on too. I looked into the JuopunutBear S-off procedure and it said a prerequisite was also that I be on the stock ROM 1st. So, do I have to somehow get my Rezound back to stock and off of the ViperRez ROM I'm on now, then do JuopunutBear, then do the RUU, then do a new recovery, then do CM10?
Click to expand...
Click to collapse
Figured it out, you have to relock your bootloader to install RUUs. Just installed the RUU... S-OFF next, then install CM 10.1
zkrp5108 said:
Stang did you ever get a response or more info on me updating the baseband
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Not yet. Hoping someone will know...
Sent from my SCH-I605 using Tapatalk 2
What are the benefits of the newer radios?
Battery life better signal strength global calling
Sent from my ADR6425LVW using xda app-developers app
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
rghart09 said:
Using the bootloader I ran the RUU. It fixed the problem with the notification drawer. I tried your ROM and Neo's and there doesn't seem to be any problems.
Thank you very much for having this thread!
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Ah that is good to see. Very happy it worked for you
okay, i can't seem to get the RUU to actually update and install for some reason, i dloaded it, checked the MD5 and renamed it. all it will do is recognize it, check it. and then stops there anyone able to point me to an instruction set (already tried and Dloaded Wildstang's)