Related
Intro
Ok, this will be another fun.
Again, my first attempt (like FroyoBread and GingerDX!) to build a custom Linux kernel for a phone. I've just found some free time this weekend This time, this is a kernel. Again, you can guess it's a Linux kernel having my customized features. We will gradually see what can be done
The main goal is to have a fast, smooth, lightweight kernel with special features.
This Linux kernel is based on our great FreeXperia Project (Jerpelea) kernel. Thank you for your unbelievable contribution for our Xperias. I still use racht's great compiling machine for this project. Thank you racht.
Features
Linux 2.6.29
Default GingerDX logo
X8Gesture / AX8MT for (fake) dual touch
ext 2/3/4 support
FXP's merged minmax / smartass / smartass V2 governor
netfilter / iptables
swap. NOT recommended.
MDDI fix
Brain **** Scheduler
Known bugs
None (?)
Requirements
Unlocked bootloader
Flashtool 2.9.1
Desire to void your warranty!
Downloads
v004
v003
v002
v001
Install instruction
1. Download
2. Turn off the phone
3. Run flashtool
4. Press Flash, choose downloaded file
5. Turn on phone while pressing back button
6. Wait till progress finishes
7. Unplug the phone, turn it on back
8. Enjoy.
Notice
1. This kernel is tested by me only on GingerDX. I don't test with other ROMs, so it is only supported if you are using GingerDX. (Perhaps this will change in future, but not now)
2. This kernel is written for E15i. I don't have E15a, so if you have problems with E15a, I cannot help.
3. This kernel is in development. It may contain bugs. If you have bugs (reboot, something not working, etc...), post it here. Don't send me PM for technical problems. I will not answer most of technical PMs
4. Incompatible with FXP ROM. Wifi will not work on his ROM.
5. Source: it has been on github for a long time but how come I forgot to put the link here @[email protected]
Thanks
Thanks go to the_laser, jerpelea, racht, nobodyAtall, zdzihu, Bin4ry and lots of other contributors...
Release history
October 04 v004.
SD Card compatibility fix.
Notice: after this release I'll be very busy. I will not work on both GDX and LDX for some time.
September 27 v003. Fully working.
Wifi fix! Thanks to FXP.
Remove chargemon compatibility to solve 100% load of init process.
September 24 v002. Improvements.
Integrated ClockworkMod 4.0.1.5. Use touchscreen to activate it during boot.
Built in UV/OC. Set 614MHz as default and removed 600MHz. I'm not a fan of OC.
BFS 0.313
Chargemon compatible!
September 19 v001. Initial public release.
Development (What has been done in my development kernel)
Nothing yet
Disclaimer
I'm not responsible if this kernel bricks your lovely phone. Use it at your own risk!
Donation
You like my kernel? Feel free to
. I'd like some beer in this hot summer!
Wow dx, you are truly rocking X8!
Amazing job, im going to wait a little bit til this gets better!!!
Goodbye!
I agree with the comment before mine
Keep up the good work...
Can this be flashed on top of gdx ROM or we need to do it from stock ROM?
Sent from my X8 using xda premium
thanks so much dx, you are really awesome
this kernel can be used with other rom, like mini cm? thanks u
wow.. thanks and keep it up bro..
ps. noob here about this kernel thing, do I need to unlock first the bootloader or just flash it? Sorry co'z i don't see it in the installation procedure..thanks
Thanks, doixanh, you're the man! Although i'll keep my paws away from my bootloader for a little longer until all this custom kernel thing settles down
Keep up the awesome work!
Well dx, what word should we use to describe you? I'm just happy to see you joining this another fun time. Thks for such good job.
Sent from my X8
@DX you need to change wifi module to make wifi work
come to think of it.
what are kernel?
where is the screenshot? (for example?)
Rycon33 said:
Can this be flashed on top of gdx ROM or we need to do it from stock ROM?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
my question also
Nice work, dx
Nice work DX !!!
unfortunately i use WiFi a lot so i will w8 for next update
I'm really sorry to see these guys that want kernel but they dont know what it is:
fakhry7 said:
come to think of it.
what are kernel?
where is the screenshot? (for example?)
Click to expand...
Click to collapse
Don't get disappointed for them
Yes I remember Angga has the same question regarding wifi, it will be fix soon
GJ, DX
anyways... shouldn't u have a warning of some sort to remove the modules already included in your kernel? it will mess up the memory addressing and cause bootloops, no?
also, requirements should have "Unlocked bootloader" too for those ignorant twits
Wow, nice worck!!!
chewdaniel said:
GJ, DX
anyways... shouldn't u have a warning of some sort to remove the modules already included in your kernel? it will mess up the memory addressing and cause bootloops, no?
also, requirements should have "Unlocked bootloader" too for those ignorant twits
Click to expand...
Click to collapse
Wow! You're so great. Maybe you can be one of the president of SE. Nice bro.
Can't boot with stock rom. Appear the GDX boot image but then go to black screen.
Thanks but I guess it will be hard for just one man to develop a kernel and a rom at the same time....so i appreciate all of this contribution to this community
Sent from my X8 using xda premium
Good work
Sent from my Xperia X8 using Tapatalk
Kernel Neo V Stock ICS by Marc0sgb
Original Link
Code:
http://www.htcmania.com/showthread.php?t=304072
Version 0.3
-Change bootimage
-Change name
-Add support for filesystem
ext3
ext4
Reiserfs
Fuse
NTFS Read/Write
NFS Client/Server UTF-8 and iso 8859-15 (European version, with euro)
Cyfs
-OC/UV 2ghz
Version 0.2
- Insecure boot.img
- Init.d by Doomlord
- swap
- Mount partitions r/w
Version 0.1
-CWM recovery 5.0.2.7 Full
Click to expand...
Click to collapse
Instructions:
fasboot flash boot boot.img
Enter recovery mode
Wipe all
Install custom zip
reboot and enjoy!
Notes:
For use CWM recovery
Use:
Backspace key for entry,
Up and Down key for move to menu
Home key for select option
Download
0.3
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Kernel/ICS/stockrom/stockrom/marckernel0.3.img/download
0.2
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Kernel/ICS/stockrom/stockrom/stockics0.2.img/download
0.1
Code:
http://sourceforge.net/projects/seandroid/files/xperianeov/Kernel/ICS/stockrom/stockrom/stockicscwm.img/download
Work in stock rom
Code:
http://forum.xda-developers.com/showthread.php?t=1393407
and this custom rom:
Code:
http://www.htcmania.com/showthread.php?t=303534
Thanks to doomlord, bin4ry, fpx team, inteks and sony for your great work!
Will test later tomorrow
i need to do is flash stockicscwm.img then flash ROM and then?
I think there is no difference. You can flash only new kernel while installing ICS.
Hi, I update the info
@Qwerty123
Tomorrow I will be update with more options if it is possible.
@mobikidz
Yes, so you can use cwm anytime CWM with back key, and now this kernel have more features than original stock rom and the custom rom.
@FrozenSE
Yes you can use this kernel for alpha ics SE roms
do i need to remove this stockics0.2.img kernel after flashing because it is an Insecure boot.img
Good Morning, people!
princesupernoah kernel v0.2 is an insecure image because i need to run adb with superuser privileges, but it`s not bad so i can use for many things. However you can download v.0.1, that it´s clean, only include CWM.
Does this kernel work on original neo?
Sharaz22 said:
Does this kernel work on original neo?
Click to expand...
Click to collapse
Hi, this kernel is a original kernel for neo v but neo´kernels working fine in neo v so this should work properly in Neo.
can someone contact Marc0sgb from HTCMANIA.com and tell him to contact me on XDA?
its kinda urgent....
regards,
DooMLoRD
I'll tell him your looking for.
Enviado desde mi MT11i usando Tapatalk
Update kernel, enjoy people
thedr0idboy said:
Hi, this kernel is a original kernel for neo v but neo´kernels working fine in neo v so this should work properly in Neo.
Click to expand...
Click to collapse
Finally some good news
Sent from my MT15i using Tapatalk
DooMLoRD said:
can someone contact Marc0sgb from HTCMANIA.com and tell him to contact me on XDA?
its kinda urgent....
Click to expand...
Click to collapse
What's wrong ?
This kernel can be used for ICS ROM ??
As t's oc'able
yes , this kernel is mainly meant for ICS
there is a glitch in the CWM installed by this kernel : UNABLE TO MOUNT SD-CARD via CWM recovery , hope the version gets changed
(CWM installed by MIUI kernel works fine)
is wifi working now
thedr0idboy said:
Kernel Neo V Stock ICS by Marc0sgb
Original Link
Code:
http://www.htcmania.com/showthread.php?t=304072
Instructions:
fasboot flash boot boot.img
Enter recovery mode
Wipe all
Install custom zip
reboot and enjoy!
Click to expand...
Click to collapse
Hi, am a newbie, i have a xperia neo v running stock rom. I have downloaded all files from your post but confused which one to flash ????
and i don't find any boot.img ????
Please help
ip2op01 said:
Hi, am a newbie, i have a xperia neo v running stock rom. I have downloaded all files from your post but confused which one to flash ????
and i don't find any boot.img ????
Please help
Click to expand...
Click to collapse
follow the below link
http://sourceforge.net/projects/sea.../stockrom/stockrom/marckernel0.3.img/download
download & flash that file it is the latest kernel v0.3 (marckernel0.3.img)
rename marckernel0.3.img to boot.img & flash it
* make sure you've set up fastboot files for flashing kernels...
[KERNEL][RECOVERY](lock/unlock)"kCernels" & reCovery zips for all ROM(fxp/stock etc)
Hello
This post Contains only works Compiled from Source
MODDED/REPACKED works ca nbe found on next post
but, before you proceed I want to make a few things clear.
This works do not involve much of any MAJOR source code changes. Just overclocking, streamlining, adding/removing governors and schedulers etc etc.
These kernels are for UNLOCKED bootloaders and are to flashed with flashtool. The wifi modules are to be installed through CWM/Xrecovery.
============================================================
1. kCernel-FXPmod (for CM7 and MIUI roms based on FXP's CM7
compiled from freexperia sources
compatible with FXP and FXP-based ROMs
min = 128mhz || max= 1228mhz or 1036mhz or 1305mhz versions available
11 different governors (v2 onwards)
Doomlord's Touch Recovery included (v2 onwards)
user level VDD control (over/undervolting) (v4 onwards)
**new**brazillianwax, smoothass, lagfree governors added (v5 onwards)
v5 ---> link
---older versions----
v4 ---> link
v3 ---> cancelled during internal testing
v2 ---> link
v1 ---> link
WARNING : If you face ANY issue WHATSOEVER by using this kernel You are supposed to Report it ONLY and ONLY on this thread and NOT on FXP's thread.
NOTE: Mirrors to all above kernels and wifi modules can be found in my signature. Download either from my dev-host account or from my direct download server hosted at icxperia.com
Click to expand...
Click to collapse
2. kCernel-STOCK (for stock and stock based ROMs)
compiled from th-Jap's thKernel Sources
compatible with all stock and stock based (wolf,donuthd,x10s,thgo,feralab) ROMs
128mhz - 1228mhz
KGSL 1.1 backport (done by th_jap himself, i just merged the changes)
13 different governors
Doomlord's Touch Recovery included (v1 onwards)
added all governors from doomlord (v1 onwards)
new** enabled cfq, VR, anticipatory IO schedulers (v2 onwards)
v2 ---> link
---older versions----
v1 ---> link
NOTE: Mirrors to all above kernels and wifi modules can be found in my signature. Download either from my dev-host account or from my direct download server hosted at icxperia.com
Click to expand...
Click to collapse
============================================================
Here are works that i have taken (with appropriate permissions to use)
sources of doomkernel made by DoomLord -->> forked repo
sources of FXP-kernel made by FXP (jerpelea) -->> forked repo
sources of thgo2-kernel made by Th-Jap (hayashikejinan) -->> forked repo
sources of Sony GB kernel (3.0.1.G.0.75) made available by SONY -->> my pushed repo
BootMenu and Touch recovery compiled binaries made by DoomLord --->> original thread
I want to mention here that i'm extremely grateful to
1. the respective devs(fxp, z, doom, th_go) to allow me to use their sources
2. doomlord who gave me the "search more" mantra that helped me learn more
3. Regnart's Guide for compiling kernels
4. TAL333 & maikinho for being great friends, support and guide
[RECOVERY]
all MODDED Kernels are at post#3
and all recoveries for locked bootloaders are at post #5
but, before you proceed I want to make a few things clear.
Post #3 and Post #5 does not contain any work involving "source level changes"
all work is modded/repacked/kanged work and not any original development
Here are works that i have taken (with appropriate permissions to use)
compiled kernel zimage of doomkernel made by DoomLord -->> original thread
compiled kernel zimage of freexperia project made by FXP (and freexperia team) -->> original thread
BootMenu and Touch recovery compiled binaries made by DoomLord --->> original thread
CWM5 compiled binary compiled by FXP for x10 (from freexperia project)
xRecovery compiled by zdzihu for x10
I want to mention here that i'm extremely grateful to
1. the respective devs(fxp, z, doom) to allow me to use their works
2. doomlord whose kernel unpacking and repacking tools make these possible
3. oodie and cobrato who helped me understand more about modding ramdisks
Modded kernels
THESE ARE ARE FLASHABLE FTF FILES FOR
UNLOCKED BOOTLOADERS
FOR FLASHABLE ZIPS LOCKED BOOTLOADERS SEE POST #5
Hi Guys!!
So here are my collection of Kernels (i have not compiled zImage
anywhere, only modded the ramdisk)
kindly note that for fs and full oc version of doomkernel (with
doomkernel bootsplash) please wait for doom to update v6 kernel on his
own thread
*1.
doomkernel-v6-half-oc-bootmanager-fulltouchdoomrecovery
(with sonyericsson bootsplash) to be used with any stock based rom
*2.
doomkernel-v6-half-oc-bootmanager-fulltouchdoomrecovery
(with new 2012 only"SONY" bootsplash)
for usage with my X10s ROM!! (or any other stock based rom)
*3.
fxp113-with doom's FULL TOUCH RECOVERY
(with my own kCernel bootsplash)
This one is ^TOTALLY^ compatible with fxp113 rom as it is the same
kernel zimage as fxp113
*4.
fxp113-cm7-with xrec+cwm5+touchrecovery+doom's bootmenu
(press 'back' to go to menu, and go to recovery from there)
(with my kcernel bootsplash)
^TOTALLY^ compatible with fxp113 rom as same zimage from fxp113 used
5.
oodie-cm7-v3-fulloc-1.28ghz
no change to recovery system (i.e same recovery as in original oodie kernel)
with oodie's original bootsplash
FXP users who want full oc are requested to try ^this^
kernel and see if there are anybugs.
6.
oodie-miui-prime X - fulloc-1.28ghz
no change to recovery system (i.e same recovery as in original oodie kernel)
with oodie's original bootsplash
IMPORTANT:
wifi modules
for 1 and 2, take doomkernel v6-1113 wifi modules from doomkernel thread
for 5 and 5, take doomkernel v6-fulloc wifi modules from doomkernel thread
for 3 and 4, if you are on latest fxp, then wifi modules not needed
(already in your rom)
note : kernels marked * before serial no. are TESTED SUCCESFUL
credits are all to respective devs whose kernels are used (fxp, doom, thjap)
and huge thanks to doom whose tools i used to make these modifications
and thanks to oodie and cobrato to help me do this
can't believe it ...
X10 are not dead !!!
These are xrec flashable zips of multi recovery system for locked bootloader
someone please make cwm zips with these files.
i forgot making and now I'm out of home
THE RECOVERY BINARIES ARE COMPILED BY
RESPECTIVE DEVS (FXP, DOOMLORD & ZDZIHU) I HAVE NOT COMPILED THEM. I
HAVE ONLY MADE THEM USABLE THROUGH CHARGEMON
SCRIPTS.
with
bootmenu
without
menu
INSTRUCTIONS
as device boot, yellow led will flash and phone vibrates, please press
button at that time
with menu : -
back button > menu
without menu :-
back > xrecovery
vol up > cwm 5 recovery
vol down > touch recovery
NOTE
users on unlocked bootloader can also use this just for testing/fun/requirement
when booting, wait for YELLOW led (when see blue led of
cobrato/oodie/doomkernel or pink led of fxp/achotjan kernel, just wait
3.seconds, then phone will vibrate and you'll see yellow led, then
press button )
WARNING!!
in with menu version, pressing back takes you to boot-menu (of
doomlord) but beaware, it'll take almost 30-45 seconds for bootmenu to
appear. I'm working on this problem. PLEASE DO NOT SHOUT "ERROR ERROR,
BRICK BRICK" WITHOUT WAITING FOR 45 SEC AFTER PRESSING BACK BUTTON"
Similarly for without menu version, booting to doom's touch recovery
takes almost 1 minute. (Cwm5 and xrec boots instantly, without
problem)
CREDITS
koush > cwm
fxp > cwm for x10
doom > touch rec & bootmenu
zdzihu > xrecovery
championswimmer said:
uploaded... please test!!!!
Click to expand...
Click to collapse
This is Full OC version?
Sent from my X10 using xda premium
MrCzlenson said:
This is Full OC version?
Sent from my X10 using xda premium
Click to expand...
Click to collapse
yes!!
i'll do the other's soon
Nice but what is with locked bl.?
Sent from my X10 using XDA
just one word .... perfect!!!
Hey Champ
Works perfect, thank you very much
Nice no more thanks left it seems. If u like i can test with v8 for u (unless u tested already)
Sent from my X10i using XDA
Nice work buddy!
________________________
laneyofdeath said:
Nice no more thanks left it seems. If u like i can test with v8 for u (unless u tested already)
Sent from my X10i using XDA
Click to expand...
Click to collapse
Tapatalk have unlimited thanks(or atleast tapatalk 2 have unlimited)
laneyofdeath said:
Nice no more thanks left it seems. If u like i can test with v8 for u (unless u tested already)
Sent from my X10i using XDA
Click to expand...
Click to collapse
please test !!!!!!!!!!!!
sahibunlimited said:
Nice work buddy!
________________________
Tapatalk have unlimited thanks(or atleast tapatalk 2 have unlimited)
Click to expand...
Click to collapse
yes!! also in new xda app!!!
Someone make video please!!!!!
What is the difference from full os,half os and final fs version?Which kernel I have to download?Thanks
do i have to install the Rom again after flashing the kernel ?
prioxxx said:
What is the difference from full os,half os and final fs version?Which kernel I have to download?Thanks
Click to expand...
Click to collapse
have you used doomkernel ever before?
sparxx4 said:
do i have to install the Rom again after flashing the kernel ?
Click to expand...
Click to collapse
no
Sent from my X10S using xda premium
championswimmer said:
have you used doomkernel ever before?
Click to expand...
Click to collapse
Doomkernel I have in my phone with your rom
prioxxx said:
championswimmer said:
have you used doomkernel ever before?
Doomkernel I have in my phone with your rom
Click to expand...
Click to collapse
for unlocked bl?
this kernel is for unlocked bl only
full = 1.2ghz
half = 1.13ghz
fs =998mhz (no overclock)
Sent from my X10S using xda premium
Click to expand...
Click to collapse
championswimmer said:
for unlocked bl?
this kernel is for unlocked bl only
full = 1.2ghz
half = 1.13ghz
fs =998mhz (no overclock)
Sent from my X10S using xda premium
Click to expand...
Click to collapse
Yes unlock bl!Ok thanks a lot because I have the fs =998 in my phone!So I will download the correct!
Dian Xin rom is developed by another Chinese Company (similar to MIUI). It is based on CM7.
The official sites: http://www.dianxinos.com/?lang=en
Forum: http://bbs.dianxinos.com/forum.php
This rom is ported using FXP's CM7 and the dianxin rom for N1 12031517
It is flashed via xRecovery. If your rom uses CWM only then you have to install doomlord's bootmanager to flash it.
Credits:
1. Z & J, doomlord, azuzu - for too many things to mention
2. DXROM Team - for the rom that I use as base
3. Tkymgr aka Goro - for the kernel
4. All X10 devs - for keeping the phone alive
5. All rom users - for testing and helping each other. the rom won't be complete without your valuable feedback
Links (do not mirror):
http://www.mediafire.com/?im0y16q4ob8xpf1
md5sum - c7e9ddd979d8d43d2488d00893399954
Rom is flashed via xRecovery
Instructions For Locked BL users
- this method also applies to Unlocked BL users whose kernel is SE Based (Doomlord's bootmanager 1.3 or my SE kernel with dual recoveries)
1. Do a backup
2. Do a factory reset in xRecovery
3. Flash the main rom: http://www.mediafire.com/?im0y16q4ob8xpf1
4. Flash hotfix 01: http://www.mediafire.com/?fipu6wsjzptz98w
5. Reboot
Instructions For Unlocked BL users (thanks to TimChew)
1. Do a backup
2. Power off the phone and flash your chosen kernel using Flashtool from here: http://forum.xda-developers.com/showthread.php?t=1345913
3. Power On the phone and boot into xRecovery
4. Do a factory reset
5. Flash the main rom: http://www.mediafire.com/?im0y16q4ob8xpf1
6. Flash hotfix 01: http://www.mediafire.com/?fipu6wsjzptz98w
7. Flash the wifi module if you are not using Free Kernel (download the module from the kernel thread)
8. Flash the UnlockedBL.zip (attached)
9. Reboot
hotfix 01 (flash with xRecovery)
Link: http://www.mediafire.com/?fipu6wsjzptz98w
md5sum: fc2d473ead9bdefb65b44d5f6a6fa280
- include changes from DXROM 120322
- fix camera (thanks to M&M team's camera fix)
Workings:
- Pretty much everything as FXP CM7
Not working / Bugs:
- please report
Notes:
1. The rom is from China. So some of the apps are in Chinese.
2. Do not ask me for language pack as I don't know how. If somebody wants to do it I'd appreciate very much.
3. X10 is not my main phone now. And due to my busy work schedule, I may not be able to come here very often. So please help each other. Especially to the newcomers.
4. If you like it please hit the Thanks button. Or you can buy me a beer
reserved ---
reserved again
wow, this is something new. definetly gonna try and report. Thx
First boot may take some time. If the screen turns off after bootanimation and the LED lights up, press Home button to show the lock screen.
full wipe...stuck on bootanimation only..locked BL
aval1392 said:
full wipe...stuck on bootanimation only..locked BL
Click to expand...
Click to collapse
Make sure you do the factory reset. I tested several times before posting.
Which bootanimation? The XDA Developer logo or the rom bootanimation?
If it's the rom bootanimation then the boot up time will take a while (about 5 minutes). And the screen will go to sleep. You have to press home button to wake it up.
and check the md5sum
c7e9ddd979d8d43d2488d00893399954
cobrato said:
Make sure you do the factory reset. I tested several times before posting.
Which bootanimation? The XDA Developer logo or the rom bootanimation?
If it's the rom bootanimation then the boot up time will take a while (about 5 minutes). And the screen will go to sleep. You have to press home button to wake it up.
and check the md5sum
c7e9ddd979d8d43d2488d00893399954
Click to expand...
Click to collapse
install the ROM
but it seems to be stucked at ROM boot animation
its been 5 minute on boot animation still waiting to get started..........
i already flashed all u told in the OP
m on ULBL doomkernel full OC version
ny suggestion????
Do i need to flash fxp based Kernel?????
cobrato said:
Make sure you do the factory reset. I tested several times before posting.
Which bootanimation? The XDA Developer logo or the rom bootanimation?
If it's the rom bootanimation then the boot up time will take a while (about 5 minutes). And the screen will go to sleep. You have to press home button to wake it up.
and check the md5sum
c7e9ddd979d8d43d2488d00893399954
Click to expand...
Click to collapse
Thanks it worked...waited 5+ mins
x10forevers said:
install the ROM
but it seems to be stucked at ROM boot animation
its been 5 minute on boot animation still waiting to get started..........
i already flashed all u told in the OP
m on ULBL doomkernel full OC version
ny suggestion????
Do i need to flash fxp based Kernel?????
Click to expand...
Click to collapse
i think it should work on dooms OC version or try downloading the doom version which Cob has modded in the link he specified in OP and try using with it !! its not specific for FXP only as u can see the list of kernels in the link provided in OP
Any reviews for this rom?
Whooo cob is back. Now I did tried to install per Op but was stuck at the bootanimation for10 min. I have locked bootloader and an on baseband 2.1.71 and 2.6.29 modFXP doonkernel v06-1113.
I tried couple of time did a clean install but got stuck at the rom boot animation not dooms animation
Sent from my X10S using XDA
stanzzzzz said:
Whooo cob is back. Now I did tried to install per Op but was stuck at the bootanimation for10 min. I have locked bootloader and an on baseband 2.1.71 and 2.6.29 modFXP doonkernel v06-1113.
I tried couple of time did a clean install but got stuck at the rom boot animation not dooms animation
Sent from my X10S using XDA
Click to expand...
Click to collapse
If you are on locked BL how can you flash doom kernel?
If you are on unlocked BL you have to use the kernel link I provide in OP. Doom's v06 is for stock SE rom only.
what camera app it's used, semc original, or miui like ? tks for your work.
The UI is not nice . I like MIUI more.
From screenshots seems a very beautiful rom.I have to test it and I hope to hasn't any bug.
pixule said:
what camera app it's used, semc original, or miui like ? tks for your work.
Click to expand...
Click to collapse
camera app is miui like !! tried taking pics it clicks and shows green screen is it a bug or something i dunno !!
Miui themes work on it ?????
desspil said:
Miui themes work on it ?????
Click to expand...
Click to collapse
dint work for me ! doesnt work coz it uses DX theme launcher which doesnt support the mtz files of miui !! still u can find out again coz i have removed it !!
acerulz said:
dint work for me ! doesnt work coz it uses DX theme launcher which doesnt support the mtz files of miui !! still u can find out again coz i have removed it !!
Click to expand...
Click to collapse
Ok, thanks for reply !
Continue only if you have read http://forum.xda-developers.com/showthread.php?t=1801191 and confirm that you have:
1)Unlocked Bootloader
2)Rooted phone
3)CWM installed
4)Have a nandroid backup of your current ROM
5)Have a titanium backup
6)Have a backup of your SD card
A HUGE THANKS TO FXP TEAM FOR MAKING A WONDERFUL ROM !!
CHANGELOG
http://code.google.com/p/freexperia/
Step 1: DOWNLOADS
1)the original thread ( http://forum.xda-developers.com/showthread.php?t=1205141 (thanks fxp!!) )
download http://uploaded.net/file/v9l8usb9/from/odeyra OR http://depositfiles.com/files/4g5uaxpoz
put it on sd card in a new folder, say cm9 and remember the location
2)I'll be giving updates when new versions are released , please check for it on weekends(mostly sundays)
please note that i dont own the zip files and that they are created by the fxp team
for changelogs see this - http://code.google.com/p/freexperia/
3)Download gapps (google apps, remember, they're ics), they're the google apps including face unlock
http://goo.im/gapps/gapps-ics-20120429-signed.zip
put it on sd card in cm9 folder
4)check baseband in about phone,if the last 2 digits are 72, skip this step and the next and go to step 3
if they are not 72,download http://uploaded.net/file/zxqy01dj/from/um2ivw or http://fiberupload.com/j6yudfu5e8za/MT11i_4.1.B.0.431_BB72.ftf
Step 2: FLASHING BASEBAND
1)put the downloaded .ftf file in C:\Flashtool\firmwares
2)connect phone in MSC (mass storage mode) mode
3)start flashtool
4)click on lightning icon on top left.
5)flashmode>ok
6)select firmware> MT11i(device)> 4.1.B.0.431(version)>BB72(branding)
7)press ok and follow the onscreen instructions
8)phone will reboot and now you should be on 72 baseband
how to check? > settings>about phone>baseband version> last 2 digits should be 72
You're now on .72 baseband!!
THIS STEP ONWARDS, YOU'LL NOT BE ABLE TO SEE YOUR SONY OFFICIAL ICS ROM SO PLEASE SAVE/BACKUP YOUR IMPORTANT WORK.
MAKE SURE THAT YOU HAVE 130mb ROM AND GAPPS.ZIP ON SD CARD AND CHARGE YOUR BATTERY TILL 50%
Step 3: FLASHING CUSTOM ( CM9 ) KERNEL
What's a kernel? go here http://www.androidcentral.com/android-z-what-kernel
1)open FXP214-UNOFFICIAL-haida.zip (downloded before) using winRAR and extract a file called "boot.img" to a known location on your COMPUTER say folder "kernel" on desktop.
2)Connect phone in MSC (mass storage mode) mode
3)open flashtool and click on lightning icon
4)select FASTBOOT MODE and click on button"reboot to fastboot mode(via adb) (buh bye sony !! )
5)wait till your notification light goes blue
6)select "SELECT KERNEL TO FLASH"
7)locate to the boot.img file
8)click ok and poof!! new kernel is flashed !!
9)Disconnect phone and DONT turn it on
Step 4: INSTALLING CM9 ROM BY FXP
1)Turn on phone and when you see the free_xperia_team logo, repeatedly press the vol down button till you enter cwm
navigation in cwm-
go up-vol up
go down-vol down
select option-home button
previous menu-back button
2)select wipe data/factory reset>yes
3)select wipe cache partition>yes
4)select advanced>wipe dalvik cache>yes
5)go back to main menu and select install zip from sd card>choose zip>navigate to the folder where you put the 130mb zip file(ROM) and gapps zip>select FXP214-UNOFFICIAL-haida.zip>yes
6)wait for it to install
7)once installed, select install zip from sd card>choose zip>navigate to the folder where you put the 130mb zip file(ROM) and gapps zip>select gapps.zip>yes
8)once both are installed, return back to the main menu and select first option - reboot system
9)wait for system to boot, first will take some time say 5 minutes
10):good: WELCOME TO CM9 :good:
11)set up the phone and install titanium backup and restore your apps!!
12)enjoy the power of cm9!!
Step 5: NANDROID BACKUP
once you've settled with cm9(restored your apps with titanium) and everything seems normal,
1)go to cwm
2)select backup and restore>backup
3)your phone will be backed up within 20 minutes or less
4)once finished, reboot phone
your backup will be stored in "SD card/clockworkmod/backup/<date_and_time_of backup>"
please rename it for convenience say "fxp 214 cm9 (new)"
HOW TO RESTORE?
1)enter cwm
2)select backup and restore>restore>select folder name( eg: fxp 214 cm9 (new) )
3)this will usually take less time than backup
4)reboot phone to the same state at which it was backed up
THIS DOES NOT CHANGE THE KERNEL
to change kernels, you need to do it via flashtool or fastboot mode
fastboot mode?
while phone is in power off state, open USB cover , connect USB to pc but not to phone , press and hold menu button , connect USB to phone and the notification light should go blue , you can now leave the menu button you are now in fastboot mode.
to change kernel while in fastboot mode, open flashtool, click lightning icon>fastboot mode>ok>select kernel to flash>ok>bazinga!!!
UPGRADING?
Are you on a fxp ROM and wanna upgrade to a higher version?
no worries bro!
1)Download the ROM
2)Put it on your SD card
3)For safety just backup your current ROM if anything goes wrong !!
4)Flash the kernel that is in the zip file. For instructions, refer ^ step 3
5)Enter recovery the way you normally do it(down button.)
6)Wipe cache partition and wipe dalvik cache ONLY!!
7)Install zip from SD card
8)Wait.......
9)When done, go to advanced, wipe battery stats for calibrating battery, reboot system
10)Wait....
Yippeeee... ROM upgraded, data safe and same, like a boss B)
GREAT THANKS TO FXP TEAM :highfive:
WANNA TRY MORE ROMS? http://forum.xda-developers.com/showthread.php?t=1313445
IF I HAVE DONE A MISTAKE, PLEASE CORRECT ME BY REPLYING
IF YOU SCREW UP YOUR PHONE, AND ARE TOTALLY HOPELESS, GET THIS
http://www.sonymobile.com/gb/tools/update-service/
OR
just leave a reply
IF I HAVE HELPED YOU ANY WAY, PLEASE DONT HESITATE TO CLICK THE THANKS BUTTON
First of all the title should be changed from ROM to GUIDE
and it should be in general section, not in dev section
Sent from my Xperia neo V
Mate...there are enough tutorials here...and now that neoV too is officially supported by cm...the hassle of editing scripts and applying patches has also gone...and fxp themselves have given enough instructions to flash cm9...and as far as rooting and unlocking is concerned...there are guides for them too.
I wont downshow ur effort...nor will dishearten you...thanks for the effort bro...but actually it is not needed.
Sent from my Xperia Neo V
Thanks for the guide, but what is MTP mode?
Haluki_BR said:
Thanks for the guide, but what is MTP mode?
Click to expand...
Click to collapse
okay now if you're on stock rom (official sony ics), you'll find usb settings and then connect your phone, there'll be 2 modes, MTP is the one in which you can view your sd card on pc named as removable disk
geekynoob said:
Edit-Just saw ur an Indian... i feel lyk banging my head on the wall...
God save me plsss...
Cheers.!
Click to expand...
Click to collapse
the_neo_v_guy said:
why?
Click to expand...
Click to collapse
@the_neo_v_guy - Bro don't bother bout that geeky noob he has an ol habit of digging into useless things !! You are doing a great job ... I appreciate your efforts bro
livesourav said:
@the_neo_v_guy - Bro don't bother bout that geeky noob he has an ol habit of digging into useless things !! You are doing a great job ... I appreciate your efforts bro
Click to expand...
Click to collapse
thanks a lot livesourav
at least some people know how to appreciate
thanks for this guide buddy, it did help me installing cm9!
iamdchosen1 said:
thanks for this guide buddy, it did help me installing cm9!
Click to expand...
Click to collapse
my pleasure
calm down people, I have cleaned a bit and moved this thread to general section
Yes, it IS NECESSARY!
unisol107 said:
Mate...there are enough tutorials here...and now that neoV too is officially supported by cm...the hassle of editing scripts and applying patches has also gone...and fxp themselves have given enough instructions to flash cm9...and as far as rooting and unlocking is concerned...there are guides for them too.
I wont downshow ur effort...nor will dishearten you...thanks for the effort bro...but actually it is not needed.
Click to expand...
Click to collapse
To unisol107 and Aarush: Sorry to disagree with you, but this kind of tutorial is indeed necessary for noobs like me. It's hard to do all these procedures in the correct way and in the correct order by reading dozens of different threads and sites; it is hard to find out what kernel is compatible with this or that rom, what rom is bug-free, what kernel is bug-free, and many, many other important things like that. And many other tutorials are filled with a plethora of abbreviations that are way beyond my knowledge - only to list few obstacles!
The forum's moderators should, indeed, give congratulations to the_neo_v_guy for his effort, and even help him to improve some litle things to make this tutorial even better than it already is! (Some sort of a better text formating and layout fine-tunning would be nice, if possible).
Stick this toppic, by the way! And help the author to mantain it up to date!
(And sorry for my bad English)
(To the_neo_v_guy: Congratulations, man! Keep going on your good work of helping completely noob people like me!
nice job!!! very helpful for noobs!! keep it up!
Some
I have some more questions...
My Xperia Neo V is a MT11i one (originally bought as a MT11a, but I change it to prevent some game incompatibility issues). These are its configurations:
- Stock ICS v 4.0.4 (version 4.1.B.0.431);
- Baseband with 72 in its last two digits;
- Kernel 2.6.32.9-perf [email protected]#9 (for 1.4 ghz overclock capabilities).
I am thinking about installing CianogenMod, but as I said before, I am a noob, and I don't have enough time (nor ninja discipline...) to read all 220 pages of this toppic: http://forum.xda-developers.com/showthread.php?t=1445844&page=220
So, I need help to find answers to these questions:
1 - Does FXP kernells allow overclock?
2 - Do I need to use only FXP kernells under CianogemMod roms, or can I use other Kernels?
3 - Are FXP132 versions of CM10 completely bug-free and fully operational in Xperia Neo V?
4 - If not, what is the newest version of Cianogen rom that is bug-free and fully operational for my Xperia Neo V, and what kernell can I use with it for best performance/overclock and/or battery-friendly use?
Thanks in advance, and sorry for my bad English.
piduca2011 said:
I have some more questions...
My Xperia Neo V is a MT11i one (originally bought as a MT11a, but I change it to prevent some game incompatibility issues). These are its configurations:
- Stock ICS v 4.0.4 (version 4.1.B.0.431);
- Baseband with 72 in its last two digits;
- Kernel 2.6.32.9-perf [email protected]#9 (for 1.4 ghz overclock capabilities).
I am thinking about installing CianogenMod, but as I said before, I am a noob, and I don't have enough time (nor ninja discipline...) to read all 220 pages of this toppic: http://forum.xda-developers.com/showthread.php?t=1445844&page=220
So, I need help to find answers to these questions:
1 - Does FXP kernells allow overclock?
2 - Do I need to use only FXP kernells under CianogemMod roms, or can I use other Kernels?
3 - Are FXP132 versions of CM10 completely bug-free and fully operational in Xperia Neo V?
4 - If not, what is the newest version of Cianogen rom that is bug-free and fully operational for my Xperia Neo V, and what kernell can I use with it for best performance/overclock and/or battery-friendly use?
Thanks in advance, and sorry for my bad English.
Click to expand...
Click to collapse
1 ..yes they do..
2.. fxp or cm9 kernels only..
3.. no..not at all completely bug free!
4. CM7 is the stable release so far.. use kernel here http://forum.xda-developers.com/showthread.php?t=1566871
TheDarkDefender said:
4. CM7 is the stable release so far.. use kernel here http://forum.xda-developers.com/showthread.php?t=1566871
Click to expand...
Click to collapse
CM7 Is on gingerbread and yea its stable and that kernel works only for cm7 not for cm9 :good:
cm9 is currently on RC2(release candidate) and i didnt find any bugs out there
the_neo_v_guy said:
CM7 Is on gingerbread and yea its stable and that kernel works only for cm7 not for cm9 :good:
cm9 is currently on RC2(release candidate) and i didnt find any bugs out there
Click to expand...
Click to collapse
dude! that kernel works for cm9 as well.. IM USING IT!! what kernel are u using for cm9?
TheDarkDefender said:
dude! that kernel works for cm9 as well.. IM USING IT!! what kernel are u using for cm9?
Click to expand...
Click to collapse
i think there may be a problem with my device, im using the kernel which came in the zip file
the_neo_v_guy said:
i think there may be a problem with my device, im using the kernel which came in the zip file
Click to expand...
Click to collapse
Ok .. i tried that too .. both worked fine!
Sent from my Neo V
TheDarkDefender said:
Ok .. i tried that too .. both worked fine!
Sent from my Neo V
Click to expand...
Click to collapse
:good:
Thanks for the detail info.
Thanx for the guide. Much Appreciated:good: