h boot - HTC Rezound

Any way to make the tampered and unlocked go away on the leaked ice with s off ?

red rage said:
Any way to make the tampered and unlocked go away on the leaked ice with s off ?
Click to expand...
Click to collapse
Yes, read throught the forum first or by searching. Or post in the correct section. This is the Dev thread. Not the questions and answer.
But right before this gets moved and locked. YES. after you S-off using controlbear, you will not say tamper anymore.

this is in the android "Development" section.
there's a reason why we also have a Q & A section

OK sorry thought Q&A section would be for unrooted devices .any way your statement is not true .I am s off and it still says tampered

flash the eng hboot

red rage said:
OK sorry thought Q&A section would be for unrooted devices .any way your statement is not true .I am s off and it still says tampered
Click to expand...
Click to collapse
Lock, re-run ruu, try flashing recovery from p98img.zip. did it and says locked, doesnt show tampered on new leak hboot .
Sent from my ADR6425LVW using Tapatalk 2

red rage said:
OK sorry thought Q&A section would be for unrooted devices .any way your statement is not true .I am s off and it still says tampered
Click to expand...
Click to collapse
!Please read this before posting in the Rezound development section!
I know this has been stated a thousand times before, but the mass number of posts in in the development section that are not development is getting out of hand.
THE DEVELOPMENT SECTION IS FOR DEVELOPMENT ONLY.....
THE Q&A SECTION IS FOR YOUR QUESTIONS REGARDING DEVELOPMENT. If you are going to post a question about development, it goes in the Q&A section. If you have a question about accessories or themes/apps, post your question there if you like. If you have a question regarding a particular part of development such as a current ROM or kernel, you can post in that particular thread to see if you can get some help. So if you are using Ziggy's kernel, you could ask a question in that thread. DO NOT POST A NEW THREAD FOR A QUESTION IN THE DEVELOPMENT SECTION.
Click to expand...
Click to collapse
I mean it's only a stick thread in here that has the title "READ BEFORE POSTING"
My HBOOT says JuopunutBear

Related

[Q] Root my evo 3D

first of all i am sorry for my bad english
And even for dubble post
I have been searching on this forum to root my evo 3d
but i am on hboot 1.49.0018 is it possible to root this or not?
thanx in advance
any body really cant figure it out
roosen said:
any body really cant figure it out
Click to expand...
Click to collapse
Wrong section - goes in Q&A
1. Wrong senction
2. Use search....
Sent from my LeeDrOiD loaded s-off HTC EVO 3D
first of all i am sorry for my bad english
And even for dubble post
*and sorry for posting in the wrong forum
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums
Moving to Q&A
Ok, so all of you came to this post to simply tell him he posted in the wrong section yet no1 offered any help? r you kidding me?
There are guides in the development section how to root basically any hboot, just look for the hboot you have and follow that guide, if you cant find a guide
Google is your friend...
Edited for grammer, was rushed at time of orignal post.
Shot from my shooter in 3D
injected with cleanrom2.7

[Q] I may have bricked while trying to go stock.

I was trying to make my Evo 3D stock again before taking it back to Sprint but when Flashing in bootloader the "system" failed to load. Now it won't boot passed the boot screen. I can go back into bootloader but I can't get to recovery. If some one can help, I would appreciate it forever.
hermes.delvillar said:
I was trying to make my Evo 3D stock again before taking it back to Sprint but when Flashing in bootloader the "system" failed to load. Now it won't boot passed the boot screen. I can go back into bootloader but I can't get to recovery. If some one can help, I would appreciate it forever.
Click to expand...
Click to collapse
Your not bricked.... This post will most probably get moved to the Q&A section by a mod soon...
What hboot are you? Also you may need to flash a stock rom by using a Ruu exe... You are stock from the sounds of it with no system or rather rom.. Which is causin the issue...
reaper24 said:
Your not bricked.... This post will most probably get moved to the Q&A section by a mod soon...
What hboot are you? Also you may need to flash a stock rom by using a Ruu exe... You are stock from the sounds of it with no system or rather rom.. Which is causin the issue...
Click to expand...
Click to collapse
I thought that might have been the case, but wasn't sure where to find a rom I could flash from the bootloader. I have Hboot 1.40. And sorry about putting it in the wrong section.
hermes.delvillar said:
I thought that might have been the case, but wasn't sure where to find a rom I could flash from the bootloader. I have Hboot 1.40. And sorry about putting it in the wrong section.
Click to expand...
Click to collapse
You can find one in the dev section probably under the stickies man ...
thanks, downloading one now. Hope that'll work.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A

Juopunutbear S-OFF WARNING

Just wanted to to let all the people who are flashing there EVO 3D to boost and you do the Juopunutbear S-OFF method you will i repeat YOU WILL HAVE TO REFLASH IT TO BOOST MOBILE ask me how i know so dont do it if you can not flash it by yourself thanks for looking any questions just ask.
Same goes for the other S-Off technique
marcusdgd said:
Same goes for the other S-Off technique
Click to expand...
Click to collapse
Yep, just about any S-OFF method will do this if you're on another carrier.
As a side note, @OP, This doesn't belong in this forum. Please post things like this in the General forum. I've messaged a mod to have it moved already.
Locked. There seems to already be a thread in general on this by...you guessed it YOU.
DO NOT create the same thread in multiple locations
xda moderator/recognised contributer

Boot Help With Custom ROM's

Help With Boot!
Hello,
I have installed the ROM on my EVO 3D trhough Clockworkmod's latest version. I am Unlocked on HBOOT 1.50. However, almost every ICS Rom I install, INCLUDING this one, when it reboots, it stays frozen on the HTC Screen with the green HTC lettering, and the White Background, and does nothing. How can i get rid of this? what do I need to do? PLEASE HELP!
Moved to proper forum.
With hboot 1.5. Go into fastboot and do fastboot boot recover img.img with whatever recovery yoyr using with sdk then install rom
Sent from my PG86100 using xda premium
Get S-off. The ICS ROM's don't flash well with 1.5 s-on. In fact, almost every person who flashes an ICS Rom that is 1.5 s-on has this issue. Getting s-off is pretty easy to do now. See the stickies in the GSM or CDMA development thread (depending on your phone).
Also, I recommend posting questions in the Q&A section when you need help.
Sent from my ICS 3VO with Tapatalk 2
coal686 said:
Get S-off. The ICS ROM's don't flash well with 1.5 s-on. In fact, almost every person who flashes an ICS Rom that is 1.5 s-on has this issue. Getting s-off is pretty easy to do now. See the stickies in the GSM or CDMA development thread (depending on your phone).
Also, I recommend posting questions in the Q&A section when you need help.
Sent from my ICS 3VO with Tapatalk 2
Click to expand...
Click to collapse
Can you please post the link to the instructions or guide? As i said, all i have done on the device so far is gained root access trough HTCDEV.com. So it is just "unlocked". What should i do then? and is it one of these: http://forum.xda-developers.com/showthread.php?p=24530433#post24530433
Thanks!
Tell me if it fixed it
Sent from my PG86100 using xda premium
spbobpilot said:
Can you please post the link to the instructions or guide? As i said, all i have done on the device so far is gained root access trough HTCDEV.com. So it is just "unlocked". What should i do then? and is it one of these: http://forum.xda-developers.com/showthread.php?p=24530433#post24530433
Thanks!
Click to expand...
Click to collapse
That's it! I was on my phone earlier or I would have posted it, but it looks like you didn't need me to . I did mine using the method in my signature, but I think the wire trick that you posted is easier from what I have read. Good luck.
It worked great! thanks to all

[Q] How do I update my bootloader to 3.18.0.0000?

In order to flash a CM12 rom I need to update my firmware or bootloader to 3.18.0.0000 or 3.19.0.0000. How do I do this. I have s-on.
frusso21 said:
In order to flash a CM12 rom I need to update my firmware or bootloader to 3.18.0.0000 or 3.19.0.0000. How do I do this. I have s-on.
Click to expand...
Click to collapse
Follow instruction on the following thread for updating firmware, and select the 3.28.1540 firmware file:
http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
Also, all questions and help threads belong in the Q&A section. I'll notify the mods to move this thread.
redpoint73 said:
Also, all questions and help threads belong in the Q&A section. I'll notify the mods to move this thread.
Click to expand...
Click to collapse
This:good:
Thread now located in Q&A.

Categories

Resources