[Q] Bulk or Many Message Sending Issue, Please Help - Android Q&A, Help & Troubleshooting

Hi Everyone
I am having Issue with the many text message sending, Means that When I forward a message to whole of my contact list or any group an error appears that
"A lot of Messages has been Sent. Click OK to continue and Cancel to Stop Sending"
I was not having this problem on the stock rom on my Samsung Galaxy Gio
I am having this problem on the custom rom like the CM7.2 and CM9
I have complaint this issue to the developers but they said its the cm7.2 and cm9 built in feature so we can't disable it.
Than I searched the method to solve this problem:
I hope so this is the link
http://forum.xda-developers.com/show...46&postcount=6
This is the text from the above link
I got it to work! Heres how(taken from link above):
Open Command Terminal and enter the following:
adb shell
sqlite3 /data/data/com.android.providers.settings/databases/settings.db
Then you'll see: sqlite>
Then enter the following to alter the limit
INSERT INTO gservices (name, value) VALUES('sms_outgoing_check_max_count', 101);
(change 101 to your new limit)
I didnt try altering the limit so I hope it works for you guys.. but I can confirm this next one works. It completely turns off the limit altogether.
To turn off the limit enter:
INSERT INTO gservices (name, value) VALUES('sms_outgoing_check_interval_ms', 0);
It worked right away for me.. (SMS Bomber >)) Id reboot to be safe.
Please anyone who can help me to disable this issue error, as I am not a developer and I can't fix it my self.

I am sure the people in your address book are happy you figured this out.

85gallon said:
I am sure the people in your address book are happy you figured this out.
Click to expand...
Click to collapse
Hope so..
But is there any way to fix this???

Related

Those using opera 8.6

Hey when reciving a email and trying to click a link instead of the link being opened in a web browser whether it be opera or IE i get a error saying The file operalaunch cannot be opened . And isnt signed or truste certificate. Any clue on how to fix this so that i can open links directly from my email.
about a year and a half ago, i ran into this problem. I googled and found a reg hack for it. After growing out of opera and into netfront, i lost the reg hack. Well just recently i decided to reinstall my old opera 8.6, and thru the time of having netfront installed i lost the reg hack info. I tried to google again, but this time i had no luck in finding it. If you happen to stumble upon it please tell! Good luck!
As posted in Thread # 297115...
You only need to make one change:
In HKLM\SOFTWARE\Microsoft\Shell\Rai\: DEFBROWSER is a key called "1". Change the string value from "OperaLaunch.exe" to "\Program Files\Opera\OperaLaunch.exe" (or whereever Opera is actually installed). You need to include the quotes around the string. Save and restart your device.
John
thanks im trying that right now
johnburn said:
You only need to make one change:
In HKLM\SOFTWARE\Microsoft\Shell\Rai\: DEFBROWSER is a key called "1". Change the string value from "OperaLaunch.exe" to "\Program Files\Opera\OperaLaunch.exe" (or whereever Opera is actually installed). You need to include the quotes around the string. Save and restart your device.
John
Click to expand...
Click to collapse
tried and doesnt work...quotes n all could u point me to the thread i tried looking and searching cant find that thread u menitoned.
rblover69 said:
tried and doesnt work...quotes n all could u point me to the thread i tried looking and searching cant find that thread u menitoned.
Click to expand...
Click to collapse
work for me with little mod to the reg string
Change the string value from "OperaLaunch.exe" to "\Program Files\Opera\Opera.exe"
yea i think i misspelled aword thats why..checking now lol thanks
i see what the problem was the first link to change the value data ending with the operalaunchexe isnt correct when applied the same error continues
but adding just opera/opera.exe corrects it and it works fine thanks all.
Binyo said:
work for me with little mod to the reg string
Change the string value from "OperaLaunch.exe" to "\Program Files\Opera\Opera.exe"
Click to expand...
Click to collapse
I am not sure how that could work, because there is no executable file called Opera.exe. There are two, one called OperaLaunch.exe and the other is OperaWM.exe. You can just run OperaWM.exe, I am not sure what OperaLauch.exe does (probably just memory checking and other housekeeping).
John
rblover69 said:
i see what the problem was the first link to change the value data ending with the operalaunchexe isnt correct when applied the same error continues
but adding just opera/opera.exe corrects it and it works fine thanks all.
Click to expand...
Click to collapse
The reason the error message appears with the default setting (which is just OperaLauch.exe) is that the operating system can't find it. Think of your PC which has the PATH variable which tells the OS where to look for executables in common folders such as \WINDOWS. Well the PPC doesn't have that concept (as far as I can tell). You have to tell the OS exactly where the file is located, either in a "path" string such as in this case, or referenced in another section of the registry.
Of course, if you installed Opera somewhere else (e.g. on the Storage Card), then the path would have to be adjusted accordingly.
John
thanks.....with the path u provided with opera/opera.exe it opened my hyper links no prob thanks guys. Im not sure how that worked as far as not being opera/operalaunch....but it worked. Thanks it was a little annoying issue. lol
rblover69 said:
thanks.....with the path u provided with opera/opera.exe it opened my hyper links no prob thanks guys. Im not sure how that worked as far as not being opera/operalaunch....but it worked. Thanks it was a little annoying issue. lol
Click to expand...
Click to collapse
You're welcome. Glad it's working. I agree that it was annoying and I was happy too when I found the fix...
John

[Don't steal my phone] Another thief protection software

Hi,
I've found many software that supposed to help in case your phone get lost or stolen.
Some were expensive, some were free, but none fitted perfectly to what I was really expecting. So I've made my own.
The closest in terms of functionnalities (and price) is Remote Tracker, but it requires .NET 3.5 which is not installed on my WM6.5 phone, and honestly, it's a very fat dependency.
The idea is that you install this software (no CAB, simply copy the 2 files on your phone), and run it once to set up the configuration. Then forget it.
In the case the phone is stolen, the software will send you a SMS with the thief's phone number, it's GPS position, the CellID in case the GPS pos is not available.
You'll then be able to act on your phone remotely by sending it some SMS (described in documentation).
The features that makes this software unique are:
It's possible to destroy all your personal data remotely (call log history, contact, emails, SMS, calendar, owner info, storage card) -> help social engineering to get back your phone.
It's possible to make the phone send you back the call history and the sim contacts.
Slut mode (see the documentation for details).
WOULDYOUSHUTUP mode (where the phone is very very nasty).
All other tracking software features...
This software is open C++ source (GPLv3), small (75ko with no dependencies), and free.
You'll find it at http://dsmp.sf.net (documentation on that page)
Or the direct link is attached.
Beta tester welcome (I've tested all functions already, but, you know what software development is....)
Some remarks for those who don't read threads:
whereRU: requires you to have at least a .wav file in your windows ring folder. I thought all phone had at least one .wav based ring. In 64kb, I haven't included a MP3/AAC/MP4 player.
owner: This is what I said in my first posts. Microsoft didn't feel it was interesting to document how to retrieve owner info. So, almost all manufacturer have made there own proprietary stuff. I've a HTC phone, so I've checked the code work for HTC. If you have more information about where your phone store its owner information in registry, I can add your phone support.
contact: On the main config dialog, in the combo box where you can enter the phone number to contact, you'll have a phone number list. It's the same list as returned in the "contact" command. So if you don't have such list in the config dialog, then this means that either you don't have any contact on your SIM card, or it's not working (in that case PM me).
Please read the website http://dsmp.sf.net
To install the software:
1. Extract the zip file (either on your phone, or on the PC, and then copy the 2 files from archive to your phone)
2. Run the extracted exe on your phone. If you have signed warning say yes.
3. Set up your configuration (DON'T check "Don't show this screen anymore")
4. If you have a GPS in your device, go outside to make sure the GPS is working with the configuration you've made
5. Enter a (not yours) phone number in the SMS par edit/combobox
6. Enter a password in the edit box on the bottom
7. Click done => Say yes.
8. Start the software again, enter the previous password in the field on the botton to unlock the dialog, then click on "Configuration done, install now"
9. If you have signature warning for the DLL say yes.
10. It should display "Installation done". You can then send yourself a SMS with the right format to check if it's working.
11. If it's working, delete the SMS you've just sent from your outbox, and trash, and then start the software again and check "Don't show this screen anymore". You'll have to click "Configuration done" again, but this times, you shouldn't have any warning.
12. If it's not working, well post on the forum.
Changelog:
- Added "allow" command so it's possible to use multiple allowed SIM card. Setup the software as described above, and then change your card. You'll get a SMS with the new number (if not, your configuration isn't good). Then reply with the command "dsmp # allow # password" with no space between #. This SIM card is then allowed. You can have up to 4 allowed SIM card.
- Fixed an installation bug on non-french phone. Sorry, I've been lazy, and it should be fixed.
- Added support for "Dsmp" in addition of "dsmp" as trigger code
- More owner info retrieved for HTC phones
Please go to sf.net page ( http://dsmp.sf.net ) if you want to get the debug version or source code.
sounds impressive ! i might give it a try!
good work !
CDMA diamond running a 6.1 rom. got to step 8 and each time I enter in my password and close my keyboard the screen where the keyboard was (touchpal is my SIP) shows the screen behind what it should show. hope that makes sense. how do I uninstall this software?
also, I dont see anywhere where it says what WOULDYOUSHUTUP mode is.
WOULDYOUSHUTUP is what happen when you send a sms with "whereRU". The phone rings at max volume for 60s with no possible way to stop it, even if it was in silent mode.
Useful when you've lost your phone nearby, (it won't stop until you've found it, or 60s later), or, as intended, to become a nuisance to any thief in the middle of the night.
To uninstall the software you must click on "Zap" button, but you need your password for that. BTW if you haven't done step 8, you don't need to uninstall, as the installation proceed only when you click "Configuration done" button.
If the software doesn't accept the password you've set at step 6, then it's likely that it was entered wrong at first? I'll PM you about this, if you don't mind.
installed it, and tested a whereRU with another phone, doesn't work. :\
I've answered with specific details by PM. I trying to understand why installation didn't work for you. I'll update the post with the informations you'll give me.
sounds really nice.
I just see some problems. These problems apply to any anti-theft program :
If you have a pin-lock for the device (not sim card lock, the built-in windows lock), the thief will not be able to change anything (owner, ...). He can only change the sim and try to boot, what will of course fail. As this fails (without unlocking phone-lock, no dialing), he will not be able to establish a connection to his mobile network and you will not get his number (?!)
As hard-reset is always possible (every thief can google ) w/o the program being cooked into rom, this software is senseless if you can't cook roms. I can't
If I understood it correctly, you would need to edit the 2 files to your needs (with numbers aso) at first instance and afterwards cook them into rom. This has to be done by each end-user each time he flashes a new rom and cant be done by rom-chef because he doesnt know your data.
Isn't it possible to make that wireless? E.g. you specify an email there and the programm will at first boot after hardreset (after cooking into rom) establish a connection to a server (or mail to specified mail) to download the details (cell number, pw, ...) you entered in the server? ^^
You only can enter one own cell number. Bad if you sometimes switch the sim's.
Would be better to implement that from remotetracker:
SIM Cards: you can set up to four known SIM cards. If you, or anyone, change the SIM card to an unknown card, your emergency number and e-mails will receive a message alerting you about the change and with the new number
Click to expand...
Click to collapse
* If you use this kind of software, you'll want to make your thief believe he succeed owning your phone. If you PIN-lock your device, then the thief will have to hard reset the phone to use it, defeating the whole process.
* In my previous phone (Universal), there was a Extended ROM made by the operator that survived hard reset. I've used that ROM by that time.
Now, you're perfectly right, with a single ROM, the hard reset kills the software. Your idea of using a external server is genius. I guess I'll add this, using your device ID (which doesn't change whatever the ROM) (or IMEI), to retrieve the config for your phone. The config will be saved on a server, and the config can be sent back by SMS (so even if the thief doesn't have network contract, it'll work).
* You switch SIM ? Is 2 SIM okay ?
I wanted the software to be extremely simple to setup, so it detected the IMSI by itself.
Now, if you need to store 2 IMSI, it'll need another edit box to let you enter the IMSI numbers.
I can add a new command "allow" that, when you've inserted your second SIM, will allow the new IMSI upon receiving.
Let me think about this.
Yep, but I won't -of course- disable excellent built-in security mechanisms to make it *perhaps* easier to get the phone back just in case someone steals my phone.
The phone-lock is ideal to keep away random access to private and corporate data from other persons (friends, aso).
Despite the lack of some functions I installed the program yesterday and it doesn't work as thought:
The program loads after each reset again with the config screen
The program is active in task manager (dsmp.exe)
The sent commands aren't executed. If I send the commands (e.g. rst or whereRU) to the phone, the display turns on but nothing happens.
(perhaps the first 2 problems are caused because I did not hide the program yet with "Do not show this anymore" Not sure about that )
You could just say at setup: Now turn off the phone and enter your other sim and start the setup again to detect the second sim
hi popol256,
is there a chance for a very thin application, that after installed on a phone (e.g LEO) makes JUST the following:
- receiving a predefined SMS lock's the phone and encrypts the msd card.
To unlock the phone and decrypt the msd card, just a so called "master password" or whatever needs to be input.
That's all
thank you,
/s1
Locking the phone is possible (but again, if you lock the phone, then the thief will hard reset it).
Encrypting the microSD card is not, I think.
So far, I think you need to either encrypt it at first use (all WM6 phone have this as a base feature). When you have data on it and want to encrypt, it's almost impossible as you'll need the same free space on your device as your card size to store the encrypted version.
(Or if only encrypting content, you'll need to reserve half your card size for the "possibly" encrypted archive).
I guess the best method for you if to use the storage card encryption feature of WM + pin lock.
bliblablub said:
Yep, but I won't -of course- disable excellent built-in security mechanisms to make it *perhaps* easier to get the phone back just in case someone steals my phone.
The phone-lock is ideal to keep away random access to private and corporate data from other persons (friends, aso).
Click to expand...
Click to collapse
You are right. The only way to have both would be to cook your own ROM with the software inside.
bliblablub said:
Despite the lack of some functions I installed the program yesterday and it doesn't work as thought:
The program loads after each reset again with the config screen
The program is active in task manager (dsmp.exe)
The sent commands aren't executed. If I send the commands (e.g. rst or whereRU) to the phone, the display turns on but nothing happens.
(perhaps the first 2 problems are caused because I did not hide the program yet with "Do not show this anymore" Not sure about that )
Click to expand...
Click to collapse
Yes the 2 first issues are because the config says to show the dialog.
The third issue means that the software isn't installed well.
I've only tested it on my phone, and I might have done something wrong.
There is a debugversion here
Extract this version to your card, then run the exe in it, and click "Zap". Then wait for few minutes, and reset your phone (this is to make internal mail application to release its lock on the interceptor DLL).
Run the software again, and set the config, click "done" or "ok", and send yourself a SMS (don't need to install this version, it runs from the card).
You should get 2 message box, the first one contains the path to the software (end in .exe), and the message you've sent, and the second only contains the command you've sent. If this work, well, I'll have to double check the release version.
bliblablub said:
You could just say at setup: Now turn off the phone and enter your other sim and start the setup again to detect the second sim
Click to expand...
Click to collapse
Yes, it's the basic idea (in fact, as soon as you insert your second SIM, you'll receive a SMS, but you'll then send an "allow" command to add this IMSI in the allowed IMSI list). I'm adding this.
Hehe, got the following error running the debugversion:
CmdLine (OK)
(empty)
Click to expand...
Click to collapse
Can't load DLL (OK)
\Carte de stockage\DSMPI.dll
Click to expand...
Click to collapse
Error (OK)
Can't register the message interceptor DLL
Please make sure the DSMPI.dll is in windows folder
Click to expand...
Click to collapse
Ok, my fault then, I've used French name for the path. Let me few hours to compile a new version with the regular name, I'll post back here.
Ok, I've added the "allow" command for multiple sim card. The idea is simple, configure your software as said in the first page, then change your sim.
You'll received a SMS to the number you've set up. Then send a "allow" command with your password, and the new SIM is allowed you'll never receive a SMS again.
bliblablub,
Please run the version you have on your storage card, and click "Zap" button to uninstall it.
Then delete the 4xxxxxxxxx_dfed_p (xxxxx is a hexadecimal number) from your storage card (file format changed).
Then download the updated DSMP.zip version from the main (or the official) page again.
There was a bug with the file path that should be fixed now with the release version.
Thank you for your patience.
popol256 said:
bliblablub,
Please run the version you have on your storage card, and click "Zap" button to uninstall it.
Then delete the 4xxxxxxxxx_dfed_p (xxxxx is a hexadecimal number) from your storage card (file format changed).
Then download the updated DSMP.zip version from the main (or the official) page again.
There was a bug with the file path that should be fixed now with the release version.
Thank you for your patience.
Click to expand...
Click to collapse
I can't uninstall it because it was not installed I guess (debug - storage). See errors on post before
Somehow I managed to uninstall the internal version. Needed several attempts.
Now installed again on phone and again nothing happens with whereRU and any other command except lcd turning on
Does it work fine?
Any opinion?
Nice, nice, nice. Sounds like the app I was always looking for. I will download and try. Thanks
It seems to work fine on my X1.
But gps is not recognized on port 4 baud 4800...

Change Host name in stock rom 2.1.1C

i see on a lot thread but i have find a lot of suggestion but not response for what i need, for naming phone on wifi network like on MINIcm6 android_xxxxxxx Why ?
i have two x10mini with 2.1.1.C, we can't connect at the same time in wireless, i think the blank hostname was problem in the server for accept them with blank hostname at the same time, then i proceed to search how to change the hostname in my x10mini for resolving this issue
i try this and work perfectly and permanantly
just have a rooted phone
add this line at /system/etc/hw_config.sh
1- echo your_hostname >/proc/sys/kernel/hostname
if it doesn't work you can use these line and remove the first one added :
2- /system/bin/busybox hostname Your_Host_Name
when you see on dhcp server you find the name what you have put in variable
NB: you can let the two lines added, nothing to loose 1 & 2 !!!!
Good luck
Thanx To Jack_R1 for his posting http://forum.xda-developers.com/showthread.php?t=668300
Thanks to puppet13th for his post http://forum.xda-developers.com/showthread.php?t=1076903
if you find this thread helpful dont forget to click on thank button !!!

"Reject Messages" list is empty in call settings

Hi,
I've replaced my rom (localized version of http://forum.xda-developers.com/showthread.php?t=1075278) and installed a phone module with call recording.
I now found that when I try to reject a call, the list of messages is empty. When I go to call settings and try to add a message nothing happens: I click '+', get a text edit box, type my message, click 'save' and the list is still empty with no error message.
What could be the reason or how to debug this issue?
Regards
flufffy said:
Hi,
I've replaced my rom (localized version of http://forum.xda-developers.com/showthread.php?t=1075278) and installed a phone module with call recording.
I now found that when I try to reject a call, the list of messages is empty. When I go to call settings and try to add a message nothing happens: I click '+', get a text edit box, type my message, click 'save' and the list is still empty with no error message.
What could be the reason or how to debug this issue?
Regards
Click to expand...
Click to collapse
I have exact same thing with my SGS2 with Android 4.0.4 since upgrade it did nlt have these messages. Very useful tool, now gone.
Will appreciate for solution!
Does anyone found a solution? I have the same problem with Galaxy S2 and official android v4.0.4
I saw more ppl with same problem in other forums but cant find any answer, please help.

[GUIDE] How to restore / import Line chat history!

Skip to How to Import Chat History below to skip the background reading.
Yes, there is a graphical import method for Line!
If you use Line, and you want to change between devices, it seems as though it is nearly impossible to backup (export) and restore (import) your Line chat history. I have searched XDA, Google, AndroidForums, Line's (useless) online help, etc. No help, no info. There are some guides about how to use a SQL editor to fool the app, etc., but that was just way too much effort for me, so I finally gave up and just switched. BUT, before I did, I went ahead and exported all my chats, even knowing there was no way to import them, just in case. Well, that just paid off.
There is absolutely no method available within Line to restore your chat history, right?! WHY is there a backup option? There MUST be a way! Seemingly no.
I just figured it out. And when I explain it, you too will wonder, why in the !#$%@^[email protected]%!#@$!#[email protected]^*%^&(*%^@# has Naver not published this?????
I was on my way to back everything up in preparation for a new ROM and figured I'd do a complete and total system wipe, meaning, I went to take a look at my internal storage (SDcard, Emulated, 0, whatever you refer to it as), to ensure that I got all the little things I want, like Viber pictures, WhatsApp pics, etc. And there I saw it. The folder. And, like you are now thinking, I thought, just maybe...
How to Import Chat History (Abbreviated, Quick and Easy)
Copy your chatHistory.zip file to internal storage sdcard/LINE_Backup
Start Line, open an existing chat or start a new chat with the person whose chat history you want to restore
Tap the drop-down arrow in the upper right, Chat Settings, and look what just showed up below the (formerly) useless Backup Chat History option
How to Backup and Restore Chat History (Additional Details)
Line offers a "Backup Chat History" option, but keep in mind, this is conversation / per-person specific. That means, you need to do it for each individual person.
For my own ease of use, and to make transferring things easy, now that I know what the process is, here's what I did.
Backing Up
Go into the conversation you want to backup.
Tap the drop-down arrow in the upper right, and select Chat Settings.
Select Backup Chat History, Backup All
Say Yes to e-mail this chat - in a previous version, I had to enter the conversation person's name in the subject, the new Line now does this for me.
Repeat this process for every conversation you want to migrate to a new device.
Restoring
On your new device, save the attachments from each e-mail into the /InternalSDCard/LINE_Backup/ directory.
Start Line, go to Chats, Tap the Chat Bubble in the upper right to start a new conversation, select the person you want to restore
Your chat window will be empty, but from here, you just follow the instructions above, basically, drop-down arrow, Chat Settings, Import Chat History
And that's it.
I REALLY hope this helps some people out. I wasted a LOT of time trying to figure this out, and as usual, once you know the solution, it's pretty simple and seems so obvious.
If I helped, throw me some Thanks button so I know I wasn't the only one!
I have a google Nexus 5, which doesn't have any internal storage.
Are you able to specify where this should be copied too as I cannot seem to find the right holder.
Also, what am i copying in there? The actual zip file or an extract of the zip file?one
kkwhong said:
I have a google Nexus 5, which doesn't have any internal storage.
Are you able to specify where this should be copied too as I cannot seem to find the right holder.
Also, what am i copying in there? The actual zip file or an extract of the zip file?one
Click to expand...
Click to collapse
On your internal storage of your Nexus 5, create a folder called: LINE_Backup the exact upper/lower case and _ matter. Put the LINE backup zips in that folder, do not extract them. LINE knows which zip goes with which user, you just have to start the chat and import per the instructions above.
BillBauman said:
How to Backup and Restore Chat History (Additional Details)
Line offers a "Backup Chat History" option, but keep in mind, this is conversation / per-person specific. That means, you need to do it for each individual person.
For my own ease of use, and to make transferring things easy, now that I know what the process is, here's what I did.
Backing Up
Go into the conversation you want to backup.
Tap the drop-down arrow in the upper right, and select Chat Settings.
Select Backup Chat History, Backup All
Click to expand...
Click to collapse
Unfortunately, The "Backup All" setting only applies to one-on-one conversations. Group chats only give you the Backup as Text option.
raveur said:
Unfortunately, The "Backup All" setting only applies to one-on-one conversations. Group chats only give you the Backup as Text option.
Click to expand...
Click to collapse
That sucks. I haven't tried a group chat in LINE before. Did you try a backup/import to see if it would work? I'm sort of assuming no, that it doesn't work, based on your post. :/
Thanks!
A huge THANKS for this, saved me alot of trouble.
Still, anyone figured out how to import group chats? Maybe from the text file?
daer2dai said:
A huge THANKS for this, saved me alot of trouble.
Still, anyone figured out how to import group chats? Maybe from the text file?
Click to expand...
Click to collapse
A big you're welcome.
I don't have enough LINE friends to actually have a group chat and try to figure it out.
I just found a method for importing the chat history using Titanium Backup and the terminal. You need root for this. Recently Line made some changes that made this more
Hope you find this useful.
1. Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
2. Log into a root shell and delete the previous settings:
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
3. Now we have to delete this xml only if you are using a recent version. In previous ones it didn't even exist as far as I know
rm /data/data/jp.naver.line.android/jp.naver.line.android.settings.xml
4. Open the Line app and it will ask you to enter your user and password.
You will receive a warning about losing your chat history. Just ignore it and...
5. Enjoy!
I had copy the zip files to the Line_backup folder which was already in the phone internal memory. However, there is no Import Chat History Button.
The Line version was the latest one and had Force Stop and restarted Line. Still to no avail.
Is there any way to view the chat log?
What format is it saved in and how would you go about viewing the chat log if you were sent one from a chat that wasn't yours?
Didn't Work on LG Android Optimus
I must be doing something wrong, but it seems I've followed all the steps. The LINE_backup files are in my SD card, but when I click Import Chat History>yes>ok, nothing happens... :/
I made an account just to post on here and hopefully find out.
daimyorl said:
I just found a method for importing the chat history using Titanium Backup and the terminal. You need root for this. Recently Line made some changes that made this more
Hope you find this useful.
1. Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
2. Log into a root shell and delete the previous settings:
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
3. Now we have to delete this xml only if you are using a recent version. In previous ones it didn't even exist as far as I know
rm /data/data/jp.naver.line.android/jp.naver.line.android.settings.xml
4. Open the Line app and it will ask you to enter your user and password.
5. Enjoy!
Click to expand...
Click to collapse
I used this method and bang! It works like a charm!
Thanks a lot
*It actually still gives warning after I logged in - that my chat history will be deleted or such -, but actually it didn't delete a thing. So, to anyone who wanna try this, don't worry with the warning message!*
james.abcde said:
I used this method and bang! It works like a charm!
Thanks a lot
*It actually still gives warning after I logged in - that my chat history will be deleted or such -, but actually it didn't delete a thing. So, to anyone who wanna try this, don't worry with the warning message!*
Click to expand...
Click to collapse
Glad it was useful for you!
Thanks for the feedback. I will add the info about the warning as I forgot it completely.
Hello,
daimyorl said:
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
Click to expand...
Click to collapse
This gives me this error:
Error: unable to open database "data/data/jp.naver.line.android/databases/naver_line": unable to open database file
I use the emulator in ROM Toolbox Lite
daimyorl said:
delete from setting;
Click to expand...
Click to collapse
If I use SQLite Debugger to delete the setting table, and I also remove the jp.naver.line.android.settings.xml file with ES Explorer, I get the Force Close when I try to open the application.
And If I delete the whole naver_line database, then Line starts, but losing the chat history.
norike said:
This gives me this error:
Error: unable to open database "data/data/jp.naver.line.android/databases/naver_line": unable to open database file
I use the emulator in ROM Toolbox Lite
Click to expand...
Click to collapse
Got it! I was missing the su command to make the emulator rooted.
I also found the jp.naver.line.android.settings.xml file in a slightly different location than where daimyorl said above (but the credits go to him). For me it was into /data/data/jp.naver.line.android/shared_prefs/
Then, the complete instructions that worked for me are:
Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
Log into a shell and delete the settings:
Code:
su
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
Remove jp.naver.line.android.settings.xml
Code:
rm /data/data/jp.naver.line.android/shared_prefs/jp.naver.line.android.settings.xml
Open the Line app and it will ask you to enter your user and password. It will also ask your phone number for the confirmation SMS.
Enjoy!
norike said:
Got it! I was missing the su command to make the emulator rooted.
I also found the jp.naver.line.android.settings.xml file in a slightly different location than where daimyorl said above (but the credits go to him). For me it was into /data/data/jp.naver.line.android/shared_prefs/
Then, the complete instructions that worked for me are:
Restore Line with Titanium Backup (app+data) (DON'T OPEN THE LINE APP YET!)
Log into a shell and delete the settings:
Code:
su
sqlite3 /data/data/jp.naver.line.android/databases/naver_line
delete from setting;
.quit
Remove jp.naver.line.android.settings.xml
Code:
rm /data/data/jp.naver.line.android/shared_prefs/jp.naver.line.android.settings.xml
Open the Line app and it will ask you to enter your user and password. It will also ask your phone number for the confirmation SMS.
Enjoy!
Click to expand...
Click to collapse
i'm gonna try it tonight.. i really hope it does work cause LINE about backup chat is so so annoying !!
i hope it works, thank you !!!
i'll give u feedback later!
woawwwwwww !!!!!!!! thank you my friend !! IT WORKS !!! now i don't have to copy every single chat backup anymore!!!
thank you!
Can I import to a different phone number?
Thanks for the guide. Does this work if I want to import my chat history to a completely different phone number? But I'll still be using the same android phone.
lishanshung said:
Does this work if I want to import my chat history to a completely different phone number? But I'll still be using the same android phone.
Click to expand...
Click to collapse
I have no idea, but give it a try an tell us what you find!
Thank you ! I was looking for a good way to restore my chats, seems your's is great !

Categories

Resources