I can't get the nes USB controller to work on stock rooted prime. I installed USB host from play store and it sees it as USB game pad, but nes emu won't recognize it. USB/BT says it needs a ROM with USB API? Any help would be greatly appreciated.
Product is made by gtron Can be found on amazon gtron classic nes USB controller.
Related
Hi folks, I have been able to get my ps3 controller and wiimotes to hook up to my transformer and dock to play games on emulators with no issues. Unfortunately, neither of these controllers work well on the n64 games. I bought an USB N64 controller off amazon this week and received it today, but it won't work correctly. http://www.amazon.com/Hyperkin-Cont...ZDPE/ref=sr_1_1?ie=UTF8&qid=1327084707&sr=8-1 - this is the controller I got. It lights up, and when programming the keymapping, it registers that there was a key pushed, but the buttons don't work. I went through and did the keymapping three times, but once finished and you try to push start at the beginning of a game, nothing happens. Are there drivers we can install on android, or is this controller just simply not compatible with android? Anyone have any ideas on this?
Try the USB Joystick app on the Market
Sent from my Transformer TF101 using Tapatalk
Hail2theskins said:
Hi folks, I have been able to get my ps3 controller and wiimotes to hook up to my transformer and dock to play games on emulators with no issues. Unfortunately, neither of these controllers work well on the n64 games. I bought an USB N64 controller off amazon this week and received it today, but it won't work correctly. http://www.amazon.com/Hyperkin-Cont...ZDPE/ref=sr_1_1?ie=UTF8&qid=1327084707&sr=8-1 - this is the controller I got. It lights up, and when programming the keymapping, it registers that there was a key pushed, but the buttons don't work. I went through and did the keymapping three times, but once finished and you try to push start at the beginning of a game, nothing happens. Are there drivers we can install on android, or is this controller just simply not compatible with android? Anyone have any ideas on this?
Click to expand...
Click to collapse
ps3 controller works fine. Just map ps3 keys in n64oid and you are set. I am in the middle of kirby 64 right now. The c controls+z was tricky but i got it. You might need to go to sixaxis and change the keys for some of the buttons. No matter what you assign the button to it will be different when you map it in n64oid. Good luck
It depends on the emulator you are using i know that n64oid will only work for sixaxis controllers, but mupen64 will be your best bet, I just plug in an xbox 360 controller into my dock and it works perfectly using mupen as an emulator.:laugh:
Try mupen64
I used my original N64 controller and a n64 to usb conveyer with the muper64 emulator. Add it weren't a solid connection it kept starting/stopping but did work and could map buttons, even load a n64 profile.
I use a Logitech copy of an Xbox controller to play Dark Forces in AnDOSbox. Works great. Plugs into my dock and is recognized right away.
Sent from my Transformer TF101 using Tapatalk 4
so...i read on a bunch of forums that you can just plug and play a 360 controller to the prime's dock via usb to play games
i have tried with shadowgun thd and snesoid....a game and an emulator that i have seen work in other threads and neither acknowledge the controller
snesoid does acknowledge the controller when i try to map the keys and shadowgun just doesn't do anything...
so is there an app i need to make it so that the prime uses the controller? i'd love to get this going..
thanks!
Try out USB/BT joystick center in app store. I've seen others say it works great for mapping controls properly.
From my understanding you can only used the wired xbox controllers. You cannot use the plug and charge remotes.
Thanks...that's what I was using (plug and charge)...I'll look for the guides for using the controller wirelessly
Sent from my Galaxy Nexus using Tapatalk
You can use wireless controllers if you have the wireless receiver for PC/Windows. Plug that into the Prime and it detects wireless 360 controllers fine. Used it on mine with no problems.
Hey guys, I am considering 2 buy a new controller for my prime. i currently have a PC wireless xbox 360 controller, for this to work on the prime i need 2 use the usb dongle given 2 me when i purchased the controller. also Something is wrong with the probably my tabs understanding of this controller as when i use it in gta or whatever it thinks that the joystick is looking upwards(this does not happen on my desktop). Was wondering if any1 else had that problem.
Also reasons for considering changing is that I do not understand how I can map keys on my controller. there is only 1 app available for this(for the xbox 360 controller) called joy something if im not mistaken. If any1 knows of a tutorial of this I would be great full if you share it with me.
What controller does the trick for you on android devices(any links to it?)
thanx in advance guys
PS(has any1 got to play asphalt 7 with a controller? love racing games)
i'm using a ps3 controller, works perfectly with all supported games .
With the sixaxis app, you also can configure mappings for non-controllergames like Modern Combat 3
mc_tdm00 said:
i'm using a ps3 controller, works perfectly with all supported games .
With the sixaxis app, you also can configure mappings for non-controllergames like Modern Combat 3
Click to expand...
Click to collapse
i tried the ps3 controller(snatched it off a friend but i was annoyed that I had to use the stupid wire:/) anything else working with sixaxis but not being a ps3 controller(its also expensive to buy 1:/)
You dont need to use the wire if you pair your controller with your tablet.
Yes u even can connect a ps3 controller to your Tablet without using the usb port on the dock. But you need the mac adress of the controller.
Here is a "How to" connect Ps3 controller without usb via bluetooth:
http://forum.xda-developers.com/showthread.php?t=1503887
1. Installed the Sixaxis Controller app, opened it, and found the local bluetooth adress on the bottom-left of the screen.
2. Downloaded and installed Motionjoy Gamepad Tool on my computer.
3. Connected my ps3 controller to my computer using USB, and clicked "BluetoothPair", then "Custom MAC" on Motionjoy.
4. Entered my prime's bluetooth adress, and clicked "Pair Now".
5. Removed the usb cable and went back to my prime and changed input method to "Sixaxis Controller".
6. Clicked "start" and waited for it to say "Successfully Configered Bluetooth" on the sixaxis app.
7. Pressed the home botton on my ps3 controller and voila, it's connected!
I'm looking to buy a Dropad A8 tablet but need to know if anyone's used the USB/BT Joycentre App? Because I tried on my Mele A2000 media player but seems the USB host ports don't get recognised by the App, so if anyone has one please just install the USB/BT Joycentre test App free from the market and plug in a USB controller including PlayStation or Xbox and see if it detects it.
Hello,
i tried to connect my wireless Xbox 360 Controller over an OTG-wire with my Lenovo s6000l Tablet. The lights on my controller and wireless adapter show me that my controller is connected, but my tablet show me no reactions. The App BT/USB Joystick Center does not find the controller. I tried to download the Vendor files from another thread in this Forum and copied them on to my Device.
I even tried to connect my PSX-Controller (PS1) over an PSX to USB adapter with my device, but the buttuns had a bad configuration. The app Sixaxis Compatibility Checkers tells me that my controller is found when i click on Start but when i press Pair Controllers it says that he couldnt find any controller and i should connect one through USB.
After searching the Internet im still without any solutions. I hope you can help me and thank you.
Sry for my bad english
Lenovo S6000L-F Same Problem x.x
I have the same problem here with the same Tablet and dont find an answer at google.
but i can use a Ps3-usb gamepad over OTG but the wifi xbox controller not, the adapter has energie and the xbox controller can connect to it, but the tablet cant use it, i tested usb debugging and many apps, under that was BT/usb but he cant find it
I dont want root my tablet, but i dont know what i can do x.x
Update:
I asked this into the lenovo Forum and the answer is:
I have to root my Device -.-
derernst said:
Hello,
i tried to connect my wireless Xbox 360 Controller over an OTG-wire with my Lenovo s6000l Tablet. The lights on my controller and wireless adapter show me that my controller is connected, but my tablet show me no reactions. The App BT/USB Joystick Center does not find the controller. I tried to download the Vendor files from another thread in this Forum and copied them on to my Device.
I even tried to connect my PSX-Controller (PS1) over an PSX to USB adapter with my device, but the buttuns had a bad configuration. The app Sixaxis Compatibility Checkers tells me that my controller is found when i click on Start but when i press Pair Controllers it says that he couldnt find any controller and i should connect one through USB.
After searching the Internet im still without any solutions. I hope you can help me and thank you.
Sry for my bad english
Click to expand...
Click to collapse
Benexdrake said:
I have the same problem here with the same Tablet and dont find an answer at google.
but i can use a Ps3-usb gamepad over OTG but the wifi xbox controller not, the adapter has energie and the xbox controller can connect to it, but the tablet cant use it, i tested usb debugging and many apps, under that was BT/usb but he cant find it
I dont want root my tablet, but i dont know what i can do x.x
Update:
I asked this into the lenovo Forum and the answer is:
I have to root my Device -.-
Click to expand...
Click to collapse
So guyz have u found any solution?
i have bought lenovo s6000l and otg cable but my wireless receiver deosnt sync with my xbox360 wireless controller...
i have already rooted the tablet and have pasted some files called vendor etc but nothing worked
I FIGURED IT OUT FINALLY! If anyone has problems with their Android not working with otg devices. Once your rooted any of arter97 kernels will make any most any popular otg controller work with no modules or anything! It's great! So excited I've been trying to figure this out for a week now. I HAVE A ONEPLUS 7 PRO RUNNING ANDROID 10 OPEN BETA 8 with arter97 kernel. Works perfectly with Xbox 360 controller connected via otg thru the Xbox 360 witless reciever!!!! I have 16 Xbox one and 16 Xbox 360 controllers and otg is the only way to play 4 player GameCube and Wii emulator games on Android with dolphin emulators. niceroms.com has every game ever created for GameCube and Wii to download free