Related
hello all,
Before I being, i searched a bit in this forum and in web. But the questions i have still are not answered.
I on KE2 stock ROM. i have an unbranded SGSII. I have rooted using steps mentioned here http://forum.xda-developers.com/showthread.php?t=1125414
I want to install any of the custom Roms or the newer ROMS mainly because the battery usage sucks. with some hour music and calls battery get drained easily.
I dont mind updating to latest stock ROM also as long as it solves the problem.
Kies dose not offer me an upgrade and its also grayed out for some reason
Here is my SGSII specs
Code:
Product Code: GT-I9100LKADBT (From RegEdit)
PDA: I9100XWKE2
Phone: I9100XXKDJ
CSC: I9100OXXKE2
Baseband: I9100XXKDJ
If I have some problem, I want to revert back to Stock rom before giving it to Samsung. I have also ordered a USB Jig. It should be on the way now. So i can reset the counter as well.
Before flashing, I want to know what all i should do. Is it just fine If i flash the firmware file? Also in Samfirmware i see something called pit files.
can anyone help me in flashing the correct rom?
thank you
All Custom ROM's give detailed installation instructions in the first couple of posts.
For what it's worth, having tried a number of different ROM's, VillainRom 1.4 has the best battery for me. 2 days with moderate use.
+ Villian rom but read and understand the instructions before you start .
jje
Cognition S2 is a good rom, full instructions for flashing.
If you look in the android development section, theres also a thread with all stock firmwares, kernals and tutorials for flashing
thank you all.
I was wondering about how to revert back in case of some problem. Also do I need to take care something about the baseband etc?
I am kind of new so thats what makes me tensed! I dont want to screw up the mobile.
Don't worry, once you have USB jib, you can reset Odin flash counter and this is a safe way to rescue you in case of brick.
In terms of baseband, ke4 or kf2 are the best ones. Kf2 kernel + kf2 base band is a good combination. You can try many ones and choose by yourself.
On xda, there are all stock firmware to rollback if needed.
Take a look at the stock rom and branded roms post in Dev section find your phone and download a copy of the rom.
That can be flashed back via Odin to original state wiping any root and stock roms .
jje
How about ROM Manager ? i read that It can install ROMS over air
http://www.androlib.com/android.application.com-koushikdutta-rommanager-nptD.aspx
Don't use that as far as know. My kernel wasn't supported and it took me days before my recovery mode was working as I wanted. Maybe it works with other kernels, but with my bad experience thus far I don't install that again.
Sent from my GT-I9100 using XDA App
galaxyII said:
How about ROM Manager ? i read that It can install ROMS over air
http://www.androlib.com/android.application.com-koushikdutta-rommanager-nptD.aspx
Click to expand...
Click to collapse
Please dont install rom manager. Its not fully compatible with the sgs2. Use it, and youll be back here asking for advice on how to fix another mess.
Sent from my GT-P1000 using XDA Premium App
stoney73 said:
Please dont install rom manager. Its not fully compatible with the sgs2. Use it, and youll be back here asking for advice on how to fix another mess.
Sent from my GT-P1000 using XDA Premium App
Click to expand...
Click to collapse
Thanks. Then i will not
Installing rom manager is not an issue... Very few custom rom are compatible with this. Afaik Cognition rom is one of them.
bgn9000 said:
Installing rom manager is not an issue... Very few custom rom are compatible with this. Afaik Cognition rom is one of them.
Click to expand...
Click to collapse
You think I can install ROMS with this? no more Odin?
No this is a little bit more complicated. You need a rom compatible with this like cognition seemed to add. The main idea is to have a rom compatible with rom manager and this will allow you to change to another rom compatible with this. Unfortunately, there are not so many custom rom... Perhaps sicopat's one?
I justed wanted to say that rom manager is not dangerous to install and even to launch.
OK Thank you,
But I am still confused If i need to update the modem etc. Let me do some more search
You can upgrade modem version by Odin flash mode separately to the rest.
http://forum.xda-developers.com/showthread.php?t=1131950
Just download a modem.bin file or gets it from a complete firmware by unzip.
Put modem.bin into phone area of Odin and start accordingly of normal flash processing.
Thanks bgn9000
MY whole worry is whether to update modem or not. I dont want to mess with my phone as i think there is no downgrade.
Looks like I have to invest more time in understanding this flashing
hi, sorry for the noobish questions. :L
i have a couple of questions, i have heard about checkrom but i havent been able to really find out what it is, could someone please tell me ?
my other question is would i be able to flash miui on my phone?
my phone's details are:
model number: GT-I9100P
Android version: 2.3.4
baseband version: I9100PBVKI2
kernel version: 2.6.35.7-I9100PBVKI3-CL608158 [email protected] #2
build number: GINGERBREAD.BVKI3
it's the nfc model locked on orange uk.
thanks
You need a P rom to flash as far as we know so far .If you flash a wrong firmware you can brick your phone .
Checkrom is a custom rom if you go to the Checkrom post in the developers thread it wil giver you a descriptions . Same goes for all custom roms page one this rom is and has the following or not .
jje
JJEgan said:
You need a P rom to flash as far as we know so far .If you flash a wrong firmware you can brick your phone .
jje
Click to expand...
Click to collapse
does this mean i cant flash miui ?
You can only flash a P rom unless you find evidence to the contrary . Most roms are for i9100 version .
Or be a guinea pig and try .
jje
JJEgan said:
You can only flash a P rom unless you find evidence to the contrary . Most roms are for i9100 version .
Or be a guinea pig and try .
jje
Click to expand...
Click to collapse
thanks for the info, i think i'll leave it for now i dont want to brick my phone :L
You can flash 9100 ROM on your 9100P
But 9100 ROMs don't support NFC module (it will be supported natively with ICS).
I have the same device (orange FR) and you can look my signature for working Radio + ROM...
blubbhome said:
You can flash 9100 ROM on your 9100P
But 9100 ROMs don't support NFC module (it will be supported natively with ICS).
I have the same device (orange FR) and you can look my signature for working Radio + ROM...
Click to expand...
Click to collapse
would it be possible for you to explain how you flashed the rom+kernel ?
thanks
snowboarder54321 said:
would it be possible for you to explain how you flashed the rom+kernel ?
thanks
Click to expand...
Click to collapse
I dont remember
But if your device is already rooted you can install Rom manager or CWM from the market and make a backup of your config. Then reboot in CWM and install what you want (read the how to install section of the wanted rom).
Don't care about your "P" version!
What you read here for standard device (i9100) is working for your P version.
blubbhome said:
I dont remember
But if your device is already rooted you can install Rom manager or CWM from the market and make a backup of your config. Then reboot in CWM and install what you want (read the how to install section of the wanted rom).
Don't care about your "P" version!
What you read here for standard device (i9100) is working for your P version.
Click to expand...
Click to collapse
okay, i'll give that a go later
Don't use Rom Manager, use Clockwork. Rom Manager seems to not work well with the SGS2, this forum is littered with posts from people who used Rom Manager to flash and it broke CW Recovery, put the phone into a bootloop or soft brick, etc, etc.
Best to play it safe IMHO.
MistahBungle said:
Don't use Rom Manager, use Clockwork. Rom Manager seems to not work well with the SGS2, this forum is littered with posts from people who used Rom Manager to flash and it broke CW Recovery, put the phone into a bootloop or soft brick, etc, etc.
Best to play it safe IMHO.
Click to expand...
Click to collapse
Oh I didn't know that rom manager was not working fine on our device. I am using clockwork manager and it is working fine.
I've seen a heap of posts in the couple of months I've been visiting this forum from people who ended up with broken CW Recovery & bootloops after using the Manager app.
I used it once to try and flash a kernel & it broke recovery completely.
Obviously any/everyone's mileage may vary, but for me, I'd rather play safe & boot into Recovery whenever I flash or backup.
blubbhome said:
Oh I didn't know that rom manager was not working fine on our device. I am using clockwork manager and it is working fine.
Click to expand...
Click to collapse
so if i shouldn't use rom manager, what should i use ?
Didn't say you shouldn't use it Just said that plenty of people have had problems using the app, and rather than risk it, since I had that problem with it, every time I've done a backup or flashed a rom/kernel I've rebooted into recovery & used CW Recovery itself to do the business
As I said in my previous post, your mileage may vary & you may not have any problems with it at all.
snowboarder54321 said:
so if i shouldn't use rom manager, what should i use ?
Click to expand...
Click to collapse
snowboarder54321 said:
so if i shouldn't use rom manager, what should i use ?
Click to expand...
Click to collapse
Read this thread :
http://forum.xda-developers.com/showthread.php?t=1103399
so is rom manager the only way to install cwm without flashing a different kernel ?
MistahBungle said:
I've rebooted into recovery & used CW Recovery itself to do the business
As I said in my previous post, your mileage may vary & you may not have any problems with it at all.
Click to expand...
Click to collapse
i just dont understand how you get cw recovery :S :L
Hello guys! I have a GT-I9100P also with the latest BVKL2 2.3.6 firmware. I had it rooted when I was at BVKI3 2.3.4 firmware and now I am looking for a good CF-ROOT kernel for my phone. What would you recommend me? (what if I tell Chainfire to make a CF-ROOT more appropriate to my kernel)?
volod96 said:
Hello guys! I have a GT-I9100P also with the latest BVKL2 2.3.6 firmware. I had it rooted when I was at BVKI3 2.3.4 firmware and now I am looking for a good CF-ROOT kernel for my phone. What would you recommend me? (what if I tell Chainfire to make a CF-ROOT more appropriate to my kernel)?
Click to expand...
Click to collapse
Why don't you post in Chainfire's thread to ask him about making an insecure KL2 kernel?
But I think you can use the insecure KL1 kernel from Chainfire's thread to use for root. Or you could flash SpeedMod or Siyah, and the rooting will happen for you. You have lots of options.
were to put the rom zip file
I got the exact same phone as the OP im trying to flash a rom in a zip format but clockwork mod recovery cant find the file ive looked in install from sd card and install update.zip. ive also tried installing it through rom manager, no joy there, inside rom manager i chose to boot into recovery to flash it manually and now i got a black screen with a white triangle n a lil green android dude so i see what people are saying about the s2 and rom manager, anyways my question is were do i place the zipped rom? on the internal or external and should i rename the rom file?
Ive had 2yrs experience with a HTC HD2 so im not exactly a noob to flashing roms, but the galaxy s2 is very new to me.
Hi guys,
I read as many as I can topics, posts, stickeys etc.... For G S II. I am an proudly use of Samsung Galaxy Plus and I succsesfully flash my rom and jumped from 2.3 to 2.6 gingerbread stock rom. But as I said above there ur so many threads for roms, custom roms, kernelc CMW ETC ETC..... so i need a little help couse i am confused. I want to make recovery to kernel couse i figer out that this is must if i want to save my waranty and comme back to stock kernel if i want in future. Also which stock Rom to put and which is newest i mean on gingerbread not on ICS, and that rom i want to be more aware in battery saver thats my needs for now. And also if I put stock newest rom than also i need to flash the kernel or not??? And whats the privilegies if I flash the kernel to?? I READ about kernels that ur interface of the roms, so I have read like a said above many threads and I am not a newbie but still need help couse this Samsung G SII isn't mine, it's my cousin 's phone, so last thing. Is to brick his phone.
Thanks to all guys which will give me the help i need...
Sent from my GT-I9001 using Tapatalk 2 Beta-5
Sent from my GT-I9001 using Tapatalk 2 Beta-5
Mikroos said:
Hi guys,
I read as many as I can topics, posts, stickeys etc.... For G S II. I am an proudly use of Samsung Galaxy Plus and I succsesfully flash my rom and jumped from 2.3 to 2.6 gingerbread stock rom. But as I said above there ur so many threads for roms, custom roms, kernelc CMW ETC ETC..... so i need a little help couse i am confused. I want to make recovery to kernel couse i figer out that this is must if i want to save my waranty and comme back to stock kernel if i want in future.
Download your original or stock firmware and save it .Or just simply keep a copy of the file you flashed 2.3.6
Also which stock Rom to put and which is newest i mean on gingerbread not on ICS, and that rom i want to be more aware in battery saver thats my needs for now. And also if I put stock newest rom than also i need to flash the kernel or not???
Roms have kernel built in .
And whats the privilegies if I flash the kernel to??
Fail to understand are you confusing kernel with firmware or with a rooted kernel .
I help couse this Samsung G SII isn't mine, it's my cousin 's phone, so last thing. Is to brick his phone.
Honest opinion is you dont have enough knowledge to flash a phone that you do not own what are you going to do if you brick it buy him a new phone .
bible
http://forum.xda-developers.com/showthread.php?t=1473577
Guide
http://forum.xda-developers.com/showthread.php?t=1125282
jje
Click to expand...
Click to collapse
Hi
I have a galaxy s2 i have rooted it using method 1 with supersu and busy box http://forum.xda-developers.com/showthread.php?t=1746794
That work i then went to install CyanogenMod 10 but it says to check for mmc brick bug and my phone has it. I am noob and cant get a new kernel to install they have an error saying e:\ sig not signed or something like that.
I have odin3 on my pc but am unsure how to use it i also found a signed kenels on this page but unsure which one to get http://forum.xda-developers.com/showthread.php?t=1877270
my phone specs are
model gt-i9100
android version 4.0.4
baseband version i9100xxlq6
kernel version 3.0.15-i9100xwlpt-cl941023
build nuber
imm76d.xwlpt
If anyone can tell me which kernel i should use so it will be safe to flash CyanogenMod 10
or a step by spet way to use odin and install the kernel in this link http://forum.xda-developers.com/showthread.php?t=1555259
or anyother safe kernel i can use to then flash CyanogenMod 10
Thanks heaps
anubis12344 said:
anyother safe kernel i can use to then flash CyanogenMod 10
Click to expand...
Click to collapse
You are right, go for SiyahKernel (latest) (safe -> no mmc) Flash it with Odin.
That will give you a safe kernel with Root then you can follow instruction in CM website (CM10 zip + gapps) to get a working CM10.
Search XDA for more help. There are lots of articles on this!
Same prob here..
ysrini said:
You are right, go for SiyahKernel (latest) (safe -> no mmc) Flash it with Odin.
That will give you a safe kernel with Root then you can follow instruction in CM website (CM10 zip + gapps) to get a working CM10.
Search XDA for more help. There are lots of articles on this!
Click to expand...
Click to collapse
Hi guys..
im just new here.. but i have been a fan of you guys since i got hooked with android.. i used to have samsung GS1 and i never had issues in changing ROMS from one to another.. but now i also have the same concern like one the members mentioned above but on my XPERIA ARC LT15i.. i was wondering what Kernel to use for CM10.. it crashes whenever i install the latest cm10.zip.. so i have to go back to stock 4.0 ICS just to get my phone working again.. some advice please. thanks..
iishmael said:
Hi guys..
im just new here.. but i have been a fan of you guys since i got hooked with android.. i used to have samsung GS1 and i never had issues in changing ROMS from one to another.. but now i also have the same concern like one the members mentioned above but on my XPERIA ARC LT15i.. i was wondering what Kernel to use for CM10.. it crashes whenever i install the latest cm10.zip.. so i have to go back to stock 4.0 ICS just to get my phone working again.. some advice please. thanks..
Click to expand...
Click to collapse
My advice is to ask this question in the appropriate forum for your device, not the i9100 Galaxy SII forum.
Im sorry for this.. i will delete my post right away. please do understand im just new here and im not quite familiar going around forums..
Guys I know this is long but PLEASE don't freak out! I really need some advice from you experts on this! I hope you could spend your time reading everything here and give me some advices! Thanks!
Phone details:
Model number: GT-I9300
Android version: 4.3
Baseband version: I9300DXUGNB1
Build number: JSS15J.I9300XXUGNA5
Hello guys, since I'm not really a rooting expert (previously I rooted a motorola device), I would like to ask for some advices regarding rooting our S3 because I have only one phone and I can't afford to brick it.
1. So basically I'm referring to the guide here. However, that rooting guide is for Samsung Galaxy S3 on I9300XXUGNA7 Android 4.3 Jelly Bean, which is different from my build number (I've checked software update on my device over OTA and Kies3 but it says I have the latest firmware), will it works for my phone? Also in the guide it says to use odin3 v3.09, however in CF_auto_root page here it says to use odin3 v1.85, so which one is working for my device or which one is better?
2. Next I would like to ask is it necessary to install CWM recovery to replace the stock one? After searching around, I found that there are some people who installed CWM recovery even before rooting, is that even possible? So basically to install CMW recovery I think I will follow the steps here, is this working for my device?
3. Okay I know this is the dumbest question... but is there anything else I need to do after the above 2 steps (flashing kernel, modem etc.)?
Thank you very much for spending your time reading my post. I hope you can clear those doubts for me!
You are posting in the wrong section my friend you need to post your question here >> http://forum.xda-developers.com/galaxy-s3/help << you will find you will get alot more replies...Ask a mod to move your post....
tallman43 said:
You are posting in the wrong section my friend you need to post your question here >> http://forum.xda-developers.com/galaxy-s3/help << you will find you will get alot more replies...Ask a mod to move your post....
Click to expand...
Click to collapse
Oops I see... thanks for telling!
nikctsh said:
Oops I see... thanks for telling!
Click to expand...
Click to collapse
Glad to see you in the right place now
Have a look at this thread >> http://forum.xda-developers.com/galaxy-s3/general/howto-rooting-wiping-flashing-ultimate-t1911726 << it may help you answer a few questions...
Also if you are planning to flash custom roms you do not need to root if you are doing it to mod your phone only then you will need to root..
nikctsh said:
Guys I know this is long but PLEASE don't freak out! I really need some advice from you experts on this! I hope you could spend your time reading everything here and give me some advices! Thanks!
Phone details:
Model number: GT-I9300
Android version: 4.3
Baseband version: I9300DXUGNB1
Build number: JSS15J.I9300XXUGNA5
Thank you very much for spending your time reading my post. I hope you can clear those doubts for me!
Click to expand...
Click to collapse
Flashing your phone in any way doesn't guarantee not bricking it, see this thread
Scroll down to the quoted section headed Quick Root from there
Download Odin
Download CF-AutoRoot for your phone
Read the link on rooting
It is really straight forward just read up on it but don't read too much into it a frighten yourself
tallman43 said:
Glad to see you in the right place now
Have a look at this thread >> http://forum.xda-developers.com/galaxy-s3/general/howto-rooting-wiping-flashing-ultimate-t1911726 << it may help you answer a few questions...
Also if you are planning to flash custom roms you do not need to root if you are doing it to mod your phone only then you will need to root..
Click to expand...
Click to collapse
Great that thread helps a lot! I cleared most of my doubts now, but one more question please, after rooting, I wished to install ported apps like S5 launcher and accuweather, and in order to install these I need to flash from recovery. Is it possible to flash this using stock recovery? Or I need to install custom recovery like CMW?
You can't install anything with stock recovery, you'll need a custom recovery.
Make sure you have a full nandroid and efs backup before you flash anything -ported apps can break the framework and produce bootloops.
Seriously though, all this information is available in the sticky or by searching -why do need people to write it all out for you?
Sent from my GT-I9300 using Tapatalk
boomboomer said:
You can't install anything with stock recovery, you'll need a custom recovery.
Make sure you have a full nandroid and efs backup before you flash anything -ported apps can break the framework and produce bootloops.
Seriously though, all this information is available in the sticky or by searching -why do need people to write it all out for you?
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Thanks for your information. I did search around and try to understand the things myself, but still there are some doubts remain, that's why I opened this thread hoping that someone can clear the doubts for me. This is my only phone and I really can't afford another (I'm from a low-income family), I just want to make sure everything is alright so that I don't mess up my device. Thanks for your understanding
If this is relevant for Samsung galaxy s3, I got this done the other day using Odin to unlock and root, ran the root app to confirm root. The ROM manager to found CWM recovery flash. So far all good, should take 5 mins in all but an hour in prep and homework.
Sent from my Nexus 4 using XDA Free mobile app
Don't use rom manager, it can soft brick your phone.
Sent from my GT-I9300 using Tapatalk
Hello! I agree that it would be better NOT to use Rom Manager. Many users had problems because of it. The safest way, in my opinion, is to flash a custom kernel using Odin. For example, I had stock rom and used Odin to flash boeffla kernel (not advertising it, just saying what I did) because that kernel had both a .tar version and a .zip one. I downloaded the .tar version and flashed it with Odin by putting the .tar file in the PDA column. That's for root.
For recovery I'm using PhilZTouch and I love it. It supports both JB and KK roms and that is preety cool. Also it's full touch so I don't need to stress my hardware buttons. It's also available as .tar file so you can flash it with Odin just like the kernel.
That's how I'd recommend anyone to root and install a custom recovery on a Sammy phone because I believe it's the safest way. PS: before launching Odin make sure the phone is NOT connected to the PC and that Kies isn't running in the background (use Task Manager to check) Goodluck! !! :thumbup::thumbup:
Sent from my GT-I9300
fatcarrotcake said:
If this is relevant for Samsung galaxy s3, I got this done the other day using Odin to unlock and root, ran the root app to confirm root. The ROM manager to found CWM recovery flash. So far all good, should take 5 mins in all but an hour in prep and homework.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
Wow, that's great. By saying unlock, do you mean unlock the bootloader? Wait, is the bootloader locked in our S3?
AlexVat said:
Hello! I agree that it would be better NOT to use Rom Manager. Many users had problems because of it. The safest way, in my opinion, is to flash a custom kernel using Odin. For example, I had stock rom and used Odin to flash boeffla kernel (not advertising it, just saying what I did) because that kernel had both a .tar version and a .zip one. I downloaded the .tar version and flashed it with Odin by putting the .tar file in the PDA column. That's for root.
For recovery I'm using PhilZTouch and I love it. It supports both JB and KK roms and that is preety cool. Also it's full touch so I don't need to stress my hardware buttons. It's also available as .tar file so you can flash it with Odin just like the kernel.
That's how I'd recommend anyone to root and install a custom recovery on a Sammy phone because I believe it's the safest way. PS: before launching Odin make sure the phone is NOT connected to the PC and that Kies isn't running in the background (use Task Manager to check) Goodluck! !! :thumbup::thumbup:
Sent from my GT-I9300
Click to expand...
Click to collapse
Thanks! Will check out PhilZTouch recovery :fingers-crossed:
Currently struggling with deodexing/odexing the stock rom, after reading around I can differentiate between the odex and deodex rom, still digging on how to deodex a rom though (since I want to install some S5 mods). After searching around, it seems like titanium backup can do the deodexing/odexing just nice Gonna do some more preparation, hopefully I can have my device rooted by this week
You could flash PhilZ Recovery and make a nand backup of your rom. This way you'd have an emergency copy if something goes wrong or if you break something in the system. Just my thought
Sent from my GT-I9300