I just recently obtained s-off yet again on my replacement rezound. I was on the gb firmware, after getting s-off i went ahead and ruu'd to the leaked ics, renamed it to PH98whatever and flashed it, and ever since then.. i can run my phone. but i can't get recovery to work, i just get the stock recovery, the green arrow, than the red ! ... Can anyone help me out? i've flashed amon ra many times (3.15) and it won't work >.< Thanks in advance.
How did you flash the recovery?
Sent from my ADR6425LVW using Tapatalk 2
Fergusonfox7 said:
I just recently obtained s-off yet again on my replacement rezound. I was on the gb firmware, after getting s-off i went ahead and ruu'd to the leaked ics, renamed it to PH98whatever and flashed it, and ever since then.. i can run my phone. but i can't get recovery to work, i just get the stock recovery, the green arrow, than the red ! ... Can anyone help me out? i've flashed amon ra many times (3.15) and it won't work >.< Thanks in advance.
Click to expand...
Click to collapse
While in bootloader perform a factory reset. Then reboot phone. Now, you should be able to boot into recovery .
superchilpil said:
How did you flash the recovery?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Through hboot
mjh68 said:
While in bootloader perform a factory reset. Then reboot phone. Now, you should be able to boot into recovery .
Click to expand...
Click to collapse
Doing that now.
Didn't work.... >.<
Fergusonfox7 said:
Didn't work.... >.<
Click to expand...
Click to collapse
So you flashed the recovery in fastboot ? Didn't do a ph98img and leave it on the card ? Otherwise no idea everyone had that happen with the leak , but it was fixed by performing a factory reset in bootloader. Sorry , out of ideas.
Did you unlock or install the modified hboot? I don't think the standard hboot will allow fastboot commands without unlocking it
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
Did you unlock or install the modified hboot? I don't think the standard hboot will allow fastboot commands without unlocking it
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Nope, i went from their modded hboot with the gb firmwire, how would i go about modding the ics one?
When you ran the ruu it replaced their hboot with the stock one. Look in the s-off thread for the juopunutbear hboot. It has the download for it and instructions. But be careful. Bad things can happen messing with hboot. I would recommend just unlocking again but it's up to you. If you do unlock I don't think there's a way for it to say locked again without turning s_on and running the s-off again
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
When you ran the ruu it replaced their hboot with the stock one. Look in the s-off thread for the juopunutbear hboot. It has the download for it and instructions. But be careful. Bad things can happen messing with hboot. I would recommend just unlocking again but it's up to you. If you do unlock I don't think there's a way for it to say locked again without turning s_on and running the s-off again
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Thanks, im pretty sure i got it, Download the controlbear from the s-off tool and get the hboot, but... can anyone tell me the command to run? its like fastboot flash jhboot.img or something..
"fastboot oem rebootRUU
fastboot flash zip jb_hboot.zip
fastboot reboot"
Got it, thanks much for the help
you cannot use fastboot flash or fastboot boot with a stock,locked,hboot.
the download is an appropriate PH98IMG file. you can put on sd card,boot to hboot,say yes to update or:
put zip into folder with adb/fastboot
boot to fastboot
open cmd window
fastboot devices
fastboot oem rebootRUU
fastboot flash zip <zipname>.zip
fastboot reboot-bootloader
verify the hboot changed
fastboot reboot
after you have the eng hboot,you can use fastboot flash to install the recovery if you want. you can also install the recovery exactly like above
to fastboot flash:
take image out of download,put inside folder with adb/fastboot utilities
boot to fastboot
open cmd window
fastboot devices
fastboot flash recovery <recoveryname>.img
fastboot reboot
note that the <zipname> and <recoveryname> must be exactly the same as what the image or zip inside your adb/fastboot folder is called.
Related
How do I install a custom rom via the boot.img method as unlocked with HTCDEV method?
I've looked everywhere to try & find this answer myself but can't find a complete 'how to' guide on doing it? I have the HTC Flyer 16GB Wifi w HC if thats any help & i'm not rooted as the HBoot is not yet supported using the Revolutionary way???
Any help would be very well received.
Just for future reference, this should go in the Q&A section. But, have you ever used adb or fastboot? You have to flash the boot.img using fastboot.
Sent from my PG86100 using Tapatalk
Whoops, sorry just realised there is a Q&A Section.
I have used adb & fastboot & have a Desire HD & have installed customs roms on that & I have been trying to install a custom one of my Flyer but can't seem to even thou I am unlocked via the HTCDEV method.
I have downloaded a custom rom in zip format, so if I extract the files to a folder on my PC, where adb etc are, & then do the boot.img from there will this then install the custom rom onto my flyer??
Thanksyou for answering.
What you need to do is download your ROM and place it on your sdcard. Flash it like you would any other ROM. Now type in 'adb reboot bootloader' and make sure your tablet is in fastboot mode. Now take the boot.img of the ROM and place it in the same directory that you have fastboot. For me that would be: c:/android-sdk-windows/tools
Now, making sure your tablet is in fastboot mode and that you cd'd to the directory for fastboot, type in: fastboot flash boot boot.img
Now just reboot and you should be running a custom ROM
Sent from my PG86100 using Tapatalk
Really, I don't understand why you'd go through all the hassle of using the unlock method. It's not that much extra to S-OFF and have installs work directly form recovery.
globatron said:
Really, I don't understand why you'd go through all the hassle of using the unlock method. It's not that much extra to S-OFF and have installs work directly form recovery.
Click to expand...
Click to collapse
This is true.
Sent from my PG86100 using Tapatalk
globatron said:
Really, I don't understand why you'd go through all the hassle of using the unlock method. It's not that much extra to S-OFF and have installs work directly form recovery.
Click to expand...
Click to collapse
Agree also. HTC Unlock looks like a hassle all around, and warranty is officially voided.
Thankyou all for your replies & i'll try it out & see how I get on.
Had to use the HTCDEV unlock as my Hboot version is not currently supported by all other unlock methods as it 1.11.0011.
Thanks again
Unlock the bootloader has nothing to do with your hboot version, just try it.
s-off doesn't work with your 1.11.0011
so you just need
unlock-------flash cwm recovery for 3.2------flash a custom rom------fastboot flash boot boot.img(the boot.img is unzipped from this custom rom)----do not forget to wipe
Da_nao_yan said:
Unlock the bootloader has nothing to do with your hboot version, just try it.
s-off doesn't work with your 1.11.0011
so you just need
unlock-------flash cwm recovery for 3.2------flash a custom rom------fastboot flash boot boot.img(the boot.img is unzipped from this custom rom)----do not forget to wipe
Click to expand...
Click to collapse
Utter nonsense. The bootloader version does matter for unlock. And it is possible to get S-OFF even if you have this hboot, it's not a direct S-OFF but it is possible and relatively easy to do.
globatron said:
And it is possible to get S-OFF even if you have this hboot, it's not a direct S-OFF but it is possible and relatively easy to do.
Click to expand...
Click to collapse
Can you please explain or give me a link? I have also HBoot 1.11.0011.
i did this procedure
Da_nao_yan said:
Unlock the bootloader has nothing to do with your hboot version, just try it.
s-off doesn't work with your 1.11.0011
so you just need
unlock-------flash cwm recovery for 3.2------flash a custom rom------fastboot flash boot boot.img(the boot.img is unzipped from this custom rom)----do not forget to wipe
Click to expand...
Click to collapse
Hi, i do this yesterday unlock through HTCDEV
- then flash cwm recovery
- flash a custom rom
but i got Wifi Error, so i read the Forum and looking for the new suggestions then I saw that I must do a "fastboot flash boot boot.img" after that my Flyer didnt boot anymore. But still I can go to HBoot and Recovery.
I dont know, if I do something wrong here.
My Flyer: S-ON, Hboot 1.11.0011
Hope, somebody can help me. Thank you
devil-77 said:
Can you please explain or give me a link? I have also HBoot 1.11.0011.
Click to expand...
Click to collapse
Do globatron's procedure, but do download the exact RUU...this is important. It works in my HTC Flyer have the 1.10.0000 now GB.
Sent from my HTC One X using XDA
Yesturday, my phone was running kinda slow, so i restarted it. It then got stuck on the white HTC screen and would not get off that. I have clock work on my s-on rooted phone running CleanRom 4.5 ICS. After trying to restore in clockwork i keep getting unable to write to the cache error. Thinking that clockwork was bad i decided to catch back up and flash to the Amon-ra per instructions from a previous post ( http://forum.xda-developers.com/showthread.php?p=31467041#post31467041). It has failed now. I can't get into any hboot now. I just get a blank screen and have to pull battery. Also, my phone does not show up in 'adb devices' anymore. Any suggestions?
Are you holding volume (down) + power after a battery pull to try and get into bootloader?
HTC Rezound
luis86dr said:
Are you holding volume (down) + power after a battery pull to try and get into bootloader?
HTC Rezound
Click to expand...
Click to collapse
Yeah, i can get into the boot loader, but if i try to to goto recovery, i get the htc screen for a couple of secs then a blank screen.
volleygod said:
Yeah, i can get into the boot loader, but if i try to to goto recovery, i get the htc screen for a couple of secs then a blank screen.
Click to expand...
Click to collapse
OK so your not bricked. From bootloader you will need to click on fastboot and flash the Amon ra recovery img from your pc. Are you on ICS or GB firmware? I could make you a flashable PH98IMG of Amon Ra.
HTC Rezound
luis86dr said:
OK so your not bricked. From bootloader you will need to click on fastboot and flash the Amon ra recovery img from your pc. Are you on ICS or GB firmware? I could make you a flashable PH98IMG of Amon Ra.
HTC Rezound
Click to expand...
Click to collapse
I am on ICS firmware. Thanks for the help.
Download this: http://db.tt/Eg2Q2M4A
Rename it PH98IMG.zip and place it on the root of your sdcard.
Reboot into bootloader and you will get prompted to flash recovery. Confirm and you should be now able to get into Amon Ra.
HTC Rezound
luis86dr said:
Download this: http://db.tt/Eg2Q2M4A
Rename it PH98IMG.zip and place it on the root of your sdcard.
Reboot into bootloader and you will get prompted to flash recovery. Confirm and you should be now able to get into Amon Ra.
HTC Rezound
Click to expand...
Click to collapse
So i did not get prompted to load the update. It just loaded it. However, it still will not go into Amon-ra. I scroll to the recovery option and hit the power button then a quick HTC screen and then blankness, just like my feelings every time i try to fix my phone oh sad day...
Am i still on GB firmware maybe? I know i tried to flash to the ICS firware when i loaded CleanRom 4.5 ICS on it a couple of months ago. Maybe it didn't take?
It should have prompted you to hit vol up to accept. Try once again and tell me what it does exactly if possible. Worst case you can pull the recovery img from that file and flash it with fastboot.
Also,
I'd recommend flash the new global RUU and keep up to date with development. This community has been on a roll as of late with development, so I'm sure you would like to take advantage of that.
HTC Rezound
luis86dr said:
It should have prompted you to hit vol up to accept. Try once again and tell me what it does exactly if possible. Worst case you can pull the recovery img from that file and flash it with fastboot.
Also,
I'd recommend flash the new global RUU and keep up to date with development. This community has been on a roll as of late with development, so I'm sure you would like to take advantage of that.
HTC Rezound
Click to expand...
Click to collapse
I turn it on and get the hboot menu for a second then it starts trying to read files (this text is green). It finds the PH98IMG file and then it "parses" it. Once done parsing it goes back to the hboot menu screen of: FASTBOOT-FACTORY RESET-CLEAR STORAGE-SIMLOCK-IMAGECRC
How do you pull the img file and flash with fastboot? I should say, i can pull the img file. How do you flash with fastboot?
Honestly, i think your better off starting the slate clean and flashing the latest RUU. When you boot into bootloader, does it say S-On or S-Off on top. If it says S-On are you locked or unlocked?
HTC Rezound
luis86dr said:
Honestly, i think your better off starting the slate clean and flashing the latest RUU. When you boot into bootloader, does it say S-On or S-Off on top. If it says S-On are you locked or unlocked?
HTC Rezound
Click to expand...
Click to collapse
I am completely fine with a clean slate! I am S-On and Unlocked.
volleygod said:
I am completely fine with a clean slate! I am S-On and Unlocked.
Click to expand...
Click to collapse
You need to relock your bootloader to flash an RUU
Since your S-On you need to re lock your bootloader with fastboot, same way you unlocked via HTC dev. Instead you will use:
fastboot oem lock
in command prompt
Download the latest RUU from here:
http://forum.xda-developers.com/showthread.php?t=1757357
Check first page, third post. You'll find a link for the latest RUU. Download it and flash it within your bootloader. (Rename it to PH98IMG.zip and place on root of SD)
You'll have to unlock bootloader once again when the RUU is complete.
HTC Rezound
luis86dr said:
Since your S-On you need to re lock your bootloader with fastboot, same way you unlocked via HTC dev. Instead you will use:
fastboot oem lock
in command prompt
Download the latest RUU from here:
http://forum.xda-developers.com/showthread.php?t=1757357
Check first page, third post. You'll find a link for the latest RUU. Download it and flash it within your bootloader. (Rename it to PH98IMG.zip and place on root of SD)
You'll have to unlock bootloader once again when the RUU is complete.
HTC Rezound
Click to expand...
Click to collapse
I recommend going s-off as soon as you update. Just flash ra. Then gain root access on stock. Then do control bear. Make sure everythings backed up.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
famouscollin said:
I recommend going s-off as soon as you update. Just flash ra. Then gain root access on stock. Then do control bear. Make sure everythings backed up.
sent from my s-off reZound rockin' viperRez Rom on global ICS firmware
Click to expand...
Click to collapse
What is the advantage to S-OFF?
luis86dr said:
Since your S-On you need to re lock your bootloader with fastboot, same way you unlocked via HTC dev. Instead you will use:
fastboot oem lock
in command prompt
Download the latest RUU from here:
http://forum.xda-developers.com/showthread.php?t=1757357
Check first page, third post. You'll find a link for the latest RUU. Download it and flash it within your bootloader. (Rename it to PH98IMG.zip and place on root of SD)
You'll have to unlock bootloader once again when the RUU is complete.
HTC Rezound
Click to expand...
Click to collapse
That did the trick. I am back to stock again. Yeah, using my old Droid Incredible was a chore with the smaller screen and 3G. I don't want to go there again.
Thanks for all your help.
No problem.
HTC Rezound
Yes-turd-ay
Sent from my HTC Rezound using Tapatalk
echolocator said:
Yes-turd-ay
Sent from my HTC Rezound using Tapatalk
Click to expand...
Click to collapse
????
I realize that there are tons of threads about this but I haven't been able to find any that match my setup.
So I S-OFF'd while running the gb firmware, now I want to update to the ics ota firmware so I can run cm9. My question is that do I need to change my hboot after running the ruu, and if so how do I do that? I know these are probably simple questions but I just want to make sure I don't brick my only phone.
Sent from my ADR6425LVW using xda app-developers app
Without having to do the full ruu get these files listed from here http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
[ICS][2.25][JB][5-7]PH98IMG.zip - This is radio/pateched hboot combo
&
PH98IMGSTOCKREC.zip This is stock recovery
Updated the radio/hboot with that combo. Then once completed flash the stock recovery and then do a factory reset. Once completed go back into hboot, reflash custom recovery. Then in your custom recovery wipe data/cache then choose your rom.
Snuzzo said:
Updated the radio/hboot with that combo.
Click to expand...
Click to collapse
I do that by renaming it to PH98IMG.zip correct? And I flash the stock recovery by renaming that PH98IMG.zip as well right?
magicnanners said:
I do that by renaming it to PH98IMG.zip correct? And I flash the stock recovery by renaming that PH98IMG.zip as well right?
Click to expand...
Click to collapse
Stock recovery, you can do that or extract it out and fastboot flash. The radio/hboot will need to be renamed.
Snuzzo said:
Stock recovery, you can do that or extract it out and fastboot flash. The radio/hboot will need to be renamed.
Click to expand...
Click to collapse
Awesome thanks I might wait until tomorrow to start all of this because if I don't finish tonight I won't have a phone in the morning lol. But thank you for your help I really appreciate it
magicnanners said:
I realize that there are tons of threads about this but I haven't been able to find any that match my setup.
So I S-OFF'd while running the gb firmware, now I want to update to the ics ota firmware so I can run cm9. My question is that do I need to change my hboot after running the ruu, and if so how do I do that? I know these are probably simple questions but I just want to make sure I don't brick my only phone.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Simple answer would be ....if you are soff. And fastboot is properly setup, then type fast boot OEM lock when you are in fast boot mode. It will lock and reboot. Pull battery. Boot back into bootloader (assuming you have a stock boot loader) and run the latest ics ruu exe. Then once it boots. Enable adb debbuging. Disable quickboot in power setting. Pull battery. Go back to fast boot. HTC dev unlock. You should already still have the unlock token on your pc. Unlock the bootloader. Then fastboot the recovery. Go to the recovery ( I like amon ra) and flash super user. Then reboot...or flash your Rom. All done.
stkiswr said:
Simple answer would be ....if you are soff. And fastboot is properly setup, then type fast boot OEM lock when you are in fast boot mode. It will lock and reboot. Pull battery. Boot back into bootloader (assuming you have a stock boot loader) and run the latest ics ruu exe. Then once it boots. Enable adb debbuging. Disable quickboot in power setting. Pull battery. Go back to fast boot. HTC dev unlock. You should already still have the unlock token on your pc. Unlock the bootloader. Then fastboot the recovery. Go to the recovery ( I like amon ra) and flash super user. Then reboot...or flash your Rom. All done.
Click to expand...
Click to collapse
You don't need to OEM Lock if you're S-Off.
darkghost568 said:
You don't need to OEM Lock if you're S-Off.
Click to expand...
Click to collapse
I'm sorry. I did that and forgot lol. Hell if your s off you can pretty much do what ever.
stkiswr said:
I'm sorry. I did that and forgot lol. Hell if your s off you can pretty much do what ever.
Click to expand...
Click to collapse
Ikr
So I'm still S-ON but I'm rooted and running Clean Rom 4.5
I need to take my phone back to Verizon as the USB port is crapping out on me and it's a pain to charge the phone. So I found the latest OTA ROM, here..
http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
And do I just need to rename it to PH98 and then flash it via recovery or is the process much more detailed?
AlmostTactful said:
So I'm still S-ON but I'm rooted and running Clean Rom 4.5
I need to take my phone back to Verizon as the USB port is crapping out on me and it's a pain to charge the phone. So I found the latest OTA ROM, here..
http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
And do I just need to rename it to PH98 and then flash it via recovery or is the process much more detailed?
Click to expand...
Click to collapse
PH98IMG is what you will want to name it, but essentially that's all you need if your s-on. they don't really check the bootloader screen so you'll be ok. I've turned in 2 already haha, one i left S-Off
Awesome!!! Thanks
Make sure you relock the bootloader first.
fastboot oem lock
shrike1978 said:
Make sure you relock the bootloader first.
fastboot oem lock
Click to expand...
Click to collapse
I literally go into fastboot, then oem, then lock? Then after that I go through the HBOOT and flash the ROM?
AlmostTactful said:
I literally go into fastboot, then oem, then lock? Then after that I go through the HBOOT and flash the ROM?
Click to expand...
Click to collapse
Yep. I've done it before by putting the PH98IMG on the sdcard, running "adb reboot bootloader" (which will take you straight to fastboot), "fastboot oem lock", then select BOOTLOADER from the fastboot menu and let it flash.
dalvear88 said:
PH98IMG is what you will want to name it, but essentially that's all you need if your s-on. they don't really check the bootloader screen so you'll be ok. I've turned in 2 already haha, one i left S-Off
Click to expand...
Click to collapse
I had a funny one....my rez was over heating and I brought it in and they popped out the battery...put it back in and then went straight to the h boot screen....I'm s-on still...but it said tampered and I thought I was screwed....but they still sent me a new one....sweet....I was elated
Sent from my ADR6425LVW using xda premium
I was on a JB rom, didn't like due to the bugs, figuired I'd go back to Sense and wait it out until a 'stable' JB rom comes out. I wanted to go back to Ineffabilis Deus v1.2 and his thread he recommends flashing back to 4.03.605.2 RUU before flashing his rom. So I did the the RUU but now I'm back to stock recovery, etc.?
Couple questions...
- Did I lose root/su?
- Am I still unlocked/s-off
- Do I have to do the wire trick again
If all of the above are yes I guess I start buy flashing AmonRa, how do I do that again? After I flash AR I'll have root access again, right?
Thanks for the help,
MAC
You will retain s off through anything you do.
You lost root and your custom recovery.
You will have to flash a custom recovery and then a superuser to gain root. Then you'll be back to normal stock rom rooted and free to flash a custom rom again.
Also you probably lost everything in internal sd so yeah.... I lost some good photos from that before
Sent from my ADR6425LVW using xda app-developers app
You didn't need to RUU your phone to go back to Dues if you were already on that firmware level. The thread just recommends you be at 4.03.605.2.
Follow the guide to re-install your recovery.
mjones73 said:
You didn't need to RUU your phone to go back to Dues if you were already on that firmware level. The thread just recommends you be at 4.03.605.2.
Follow the guide to re-install your recovery.
Click to expand...
Click to collapse
im having a brain fart. i downloaded the amon.img. how do i flash it? what are the steps? thanks,
xXezmacXx said:
im having a brain fart. i downloaded the amon.img. how do i flash it? what are the steps? thanks,
Click to expand...
Click to collapse
rename to PH98IMG flash in hboot
Damasterjj said:
rename to PH98IMG flash in hboot
Click to expand...
Click to collapse
That doesn't work for an .img file.
You need adb installed on your pc to flash an .img file. Copy the file somewhere, bring up a command prompt, reboot the phone to the bootloader, select fastboot, plug it into your PC, run "fastboot flash recovery path/to/recovery.img" without the quotes.
You can also just download the all in one toolkit which contains everything you need - http://forum.xda-developers.com/showthread.php?t=1504824
Damasterjj said:
rename to PH98IMG flash in hboot
Click to expand...
Click to collapse
so i rename "recovery-ra-vigor-3.16-gnm.img" to "PH98IMG.img"? how do i get into hboot?
mjones73 said:
That doesn't work for an .img file.
You need adb installed on your pc to flash an .img file. Copy the file somewhere, bring up a command prompt, reboot the phone to the bootloader, select fastboot, plug it into your PC, run "fastboot flash recovery path/to/recovery.img" without the quotes.
You can also just download the all in one toolkit which contains everything you need - http://forum.xda-developers.com/showthread.php?t=1504824
Click to expand...
Click to collapse
i tried what you told me and now my phone is at screen with a red triangle /!\?
C:\android-sdk\platform-tools>fastboot flash recovery C:\android-sdk\platform-to
ols\recovery.img
sending 'recovery' (7796 KB)...
OKAY [ 1.409s]
writing 'recovery'...
FAILED (remote: not allowed)
finished. total time: 1.736s
Click to expand...
Click to collapse
is my phone ok?
xXezmacXx said:
i tried what you told me and now my phone is at screen with a red triangle /!\?
Click to expand...
Click to collapse
Place this in your sdk platform tools folder
http://unlimited.io/downloads/hboots/vigor/ICS_3.14.605.5/jb_hboot.zip
Then flash using the following commands:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip jb_hboot.zip
fastboot reboot
Then you can proceed with your recovery flash. Technically, you don't need to root again. A custom rom will cover that for you.
Snuzzo said:
Place this in your sdk platform tools folder
http://unlimited.io/downloads/hboots/vigor/ICS_3.14.605.5/jb_hboot.zip
Then flash using the following commands:
fastboot erase cache
fastboot oem rebootRUU
fastboot flash zip jb_hboot.zip
fastboot reboot
Then you can proceed with your recovery flash. Technically, you don't need to root again. A custom rom will cover that for you.
Click to expand...
Click to collapse
edit: got it to work, thx. whats the diff between JuopunutBear HBOOT and the HBOOT i had before?
also, now my radio/hboot are back to 2.25.2525? i thought 2.27 was the most up to date?
delete please.
xXezmacXx said:
I was on a JB rom, didn't like due to the bugs, figuired I'd go back to Sense and wait it out until a 'stable' JB rom comes out. I wanted to go back to Ineffabilis Deus v1.2 and his thread he recommends flashing back to 4.03.605.2 RUU before flashing his rom. So I did the the RUU but now I'm back to stock recovery, etc.?
Couple questions...
- Did I lose root/su?
- Am I still unlocked/s-off
- Do I have to do the wire trick again
If all of the above are yes I guess I start buy flashing AmonRa, how do I do that again? After I flash AR I'll have root access again, right?
Thanks for the help,
MAC
Click to expand...
Click to collapse
1. every personalized ROM in xda has been rooted
2. yes still S-OFF
3. idk
How do I get on the latest hboot? Snuzzo had me flash this JuopunutBear 2.25 hboot.
Sent from my ADR6425LVW using Tapatalk 2
xXezmacXx said:
How do I get on the latest hboot? Snuzzo had me flash this JuopunutBear 2.25 hboot.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
That hboot is fine, if you're s-off you can download the latest here - http://forum.xda-developers.com/showthread.php?t=1614366
If you're s-on you need to download the whole RUU with the 2.27 hboot, re-lock your phone and install it via hboot.
mjones73 said:
That hboot is fine, if you're s-off you can download the latest here - http://forum.xda-developers.com/showthread.php?t=1614366
If you're s-on you need to download the whole RUU with the 2.27 hboot, re-lock your phone and install it via hboot.
Click to expand...
Click to collapse
So I just rename it and go in fastboot to flash it or flash it in recovery? Thx btw for link.
Oh and what is that firmware patch do?
Sent from my ADR6425LVW using Tapatalk 2
xXezmacXx said:
So I just rename it and go in fastboot to flash it or flash it in recovery? Thx btw for link.
Oh and what is that firmware patch do?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
The firmware patch will upgrade all the firmware only without wiping out your rom. It will only work if you're s-off and you need to rename it and flash it in the bootloader.
xXezmacXx said:
edit: got it to work, thx. whats the diff between JuopunutBear HBOOT and the HBOOT i had before?
also, now my radio/hboot are back to 2.25.2525? i thought 2.27 was the most up to date?
Click to expand...
Click to collapse
The stock 2.27 only allows pc fastboot remote to only certain commands. Also the 2.25 hboot will work fine, sometimes you don't need the latest firmware.
Sent from my ADR6425LVW using Xparent Green Tapatalk 2