Force the new 12072 update on Lumia 800 - Nokia Lumia 800

Hi guys, if you are like me and didn't receive the new 12072 update yet, it's very easy to force it on your Lumia 800. I did it this morning, and my phone is locked and branded, and everything went well, so here is how to make it.
First, grab the update http://download.windowsupdate.com/msdownload/update/software/dflt/2012/04/oemupdate.cab.pks_98ed59ede38f0bd78d153d984fcb96e119de2ccd.cab. It's a cab archive, so don't extract it, just leave it as it is.
Then download this tool and install the x32 or x64 version according to your configuration.
Now download this one and simply extract it in a folder. Connect your Lumia to Zune and wait for the sync process to end. Close Zune. Put the .cab file in the same folder than the tool called WP7 cab sender, at the root of the file "WP7 Update Cab Sender.bat", it's important.
Launch the batch file "WP7 Update Cab Sender.bat", an msDos window should open, asking you to choose a letter for an option: choose the option of your choice but don't forget to make a backup before installing the new update.
Then you only have to wait for the backup / update to end. Don't close the MS-DOS window before the end of the process. It's done, your phone is now running the new update.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Well technically its a command prompt and not a "MSDOS" I update mine a few minutes ago. The whole procedure with backup should take about 20 minutes.

Yup. And the Volume bug does indeed seem to have disappeared
Sent from my iPad using Tapatalk

Big Yes,
it seems to fix the volume bug, which was a big issue for me.
For the rest, I don't know; I only have had it for 5 minutes!

Thank u a lot,the bug audio disappear now

Thanks for instructions/link.
Easy update, everything working.

Seems that the audio bug (using the headset during a call) disappeared for me too.

does this mess with the bootloader at all?

can't w8 to try it~~~

Just got the update today, Vodafone, Netherlands.
(Pre-ordered Lumia 800 from Vodafone webstore)

Thank God for this site.. The did the links and instructions from Mobiletechworld.com and the cab sender refused to see the update.
Used the ones in this post and the update went PERFECTLY!

bit lost what .cab file do i need to put in folder ? mine is just creating logs ?

andy1969 said:
bit lost what .cab file do i need to put in folder ? mine is just creating logs ?
Click to expand...
Click to collapse
This one

yep have done that dont get option to update just a message press any key to continue i do and it says reading device then a link to saved log files what am i doing wrong.

andy1969 said:
yep have done that dont get option to update just a message press any key to continue i do and it says reading device then a link to saved log files what am i doing wrong.
Click to expand...
Click to collapse
You must extract the archive called WP7+Update+Cab+Sender.zip.
This will create a folder called the same name: WP7+Update+Cab+Sender.
Place your cab archive inside this folder, just where is located the file called WP7 Update Cab Sender.bat
Run this batch file and select option number one, "S ·(S)end Cabs to device"
The update should then start.

I PRESS S THEN ALL I GET IS BELOW MESSAGES
moving files to log directory
cleaning usless files
done
press any key to continue
so i press s nothing happens get above message again

andy1969 said:
I PRESS S THEN ALL I GET IS BELOW MESSAGES
moving files to log directory
cleaning usless files
done
press any key to continue
so i press s nothing happens get above message again
Click to expand...
Click to collapse
Ok try this: double-clic on the folder called "Tools", then on x64 or x86 according to your configuration. Launch then the file "UpdateWP.exe".
Back in the folder "WP7+Update+Cab+Sender", double-clic on "if needed install this tool", then on "x64" (64 bits) or "x86" (32 bits) according to your config. Finaly, launch "Setup-UpdateWP-x64/x86.exe".
Votre ordinateur est paré pour la mise à jour.

Just did my second cab sender update. Why are operators so slow when it comes to these things? I mean, it's a minor update, isn't it? Thank you.
PS: I had someone call me while listening to music; no longer shock therapy. Everything seems fine now

Thank you for the easy to follow post on how to update.
Having too tried to follow instructions posted elsewhere, and failed, managed to update quickly and easily this time.

does forcing this update wipe all your apps/messages etc?

Related

Error commLoader in W2K5

Hi brothers
Thanks for ROM W2K5
Thsi is my Memmory
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After upgrade W2K3SE to W2K5 for 2 days the error appear.
please help.
Thanks
You seem to be using your ram twice....
You show 118meg of main memory (ram) and then later on a RAMDISK partition of 95meg. Unless the XDA2 has >200meg ram ( it doesnt) then something is wrong!
As far as im aware you cannot use the ramdisk prog on the fullram versions of wm2k5, this could be your problem.
hi there i have the same problem, got it after i de-installed pocket controller from soti.
checked startup folder for commloader.exe but its not there,
i think its a setting in the registry.
it appears at startup (reset) also after pressing on/off button.
Anyone else with this problem ?
It has to do with Pocket Controller. Reinstalled the app problem gone, de-installed problem reappeared.
The commloader resides on the bottom right part of the screen (where the BT icon is).
Anyone any idea where to disable the loading of icons in that part of the screen.
Perhaps topic should be moved?
helgo said:
hi there i have the same problem, got it after i de-installed pocket controller from soti.
checked startup folder for commloader.exe but its not there,
i think its a setting in the registry.
it appears at startup (reset) also after pressing on/off button.
Anyone else with this problem ?
Click to expand...
Click to collapse
HI
You are right, I just unistall SITO Pocket controller then like that.
CommLoader is the device driver of SOTI's Pocket Controller, it's required by the desktop Pocket controller to be able to communicate with your PDA.
To get rid of the message, just go to the: [\Windows\startup] directory & manually delete the CommLoader(.exe). It should have been removed automatically by uninstall, but it didn't so you have to remove/delete it manually.
rhmartin said:
CommLoader is the device driver of SOTI's Pocket Controller, it's required by the desktop Pocket controller to be able to communicate with your PDA.
To get rid of the message, just go to the: [\Windows\startup] directory & manually delete the CommLoader(.exe). It should have been removed automatically by uninstall, but it didn't so you have to remove/delete it manually.
Click to expand...
Click to collapse
Thanks, but there is no such as commloader.exe in my Windows\Startup
Reflash, sofar the only solution for me. or keep soti PC
Soti has hooked itself to some services, dunno which.
cheeerz
interesting...
can it be a hidden file? it shouldn't be. can u put a check mark on the [Show all files] in the menu?
This is just a wild guess but you may want to check; do you have another \Windows directory in the NAND/FLASH/Storage or in any other storage?
Now don't laugh at it, since I used to have a complete \Windows directory in the Flash/NAND storage in Buzz's initial release of WM2k5!!! :lol:
Cheers.
Cannot find commloader.exe anywhere.
reinstall SITO and keep it, that all newver popup error again.
I know this problem and I have the solution.
Some programs do not delete their notification string when they are uninstalled.
Download this free tool and install it:
http://www.scarybearsoftware.com/checknotifications.zip
Info are here:
http://www.scarybearsoftware.com/ppc_cn_overview.html
After installation, start the program on your XDA. It will show the notification string fromthe Commloader. Klick on it and delete it.
Cheers
Patric
pschoch said:
I know this problem and I have the solution.
Some programs do not delete their notification string when they are uninstalled.
Download this free tool and install it:
http://www.scarybearsoftware.com/checknotifications.zip
Info are here:
http://www.scarybearsoftware.com/ppc_cn_overview.html
After installation, start the program on your XDA. It will show the notification string fromthe Commloader. Klick on it and delete it.
Cheers
Patric
Click to expand...
Click to collapse
You are the best
Thanks very much. nothing pop-up anymore in my sweeeet XDAII :lol: :lol: :lol:

LnkMgr v0.0.2.7 Alpha Released [03/19/10]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LnkMgr v0.0.2.7 Alpha Released
Now includes fix for shared folders and minor graphic improvements
LnkMgr is a link/shortcut creator and editor for the Pocket PC. It allows a user to effortlessly create and catagorize links en masse in the Start Menu folder. It also allows you to remove invalid shortcuts.
More information and downloads are available here: Please note the site may go up and down, Apache/Mono is kind of flaky.
http://derek.souers.org/lnkmgr
QRCode to Download latest version:
Hi dtsouers,
You have created a little tiny tool that helps to organize things better.
One question from me for what i have found on your website:
>>P* is the Programs folder located in StartMenu
>>If nothing is specified it will go into the StartMenu
It is possible to move links to P*?
Sample: the *.lnk it is in the main directory of \startmenu\programs.
Now i will move it to \startmenu\programs\sample_dir.
Great app! Now only if it looked and functioned a little better.. I'd cook into into my ROM for good.
First you need to use the Category Editor to create sample_dir in P*.
Once that is complete, find your link in the list and change the category to sample_dir.
dtsouers said:
First you need to use the Category Editor to create sample_dir in P*.
Once that is complete, find your link in the list and change the category to sample_dir.
Click to expand...
Click to collapse
hi dtsouers,
this i will testing in the evening and report later
I get an error with wm653.
Sad face.
Edit:
I installed mine to the phone memory.
I even uninstalled .net35 and reinstalled it just for kicks.
I got an error message on startup. Please see the 2 screenshots.
You have any sugeestion, dtsouers?
EDIT:
BTW:
Link Manager is installed on the storage card. Can this be the problem?
My phone (signature)
mike2nl said:
I got an error message on startup. Please see the 2 screenshots.
You have any sugeestion, dtsouers?
EDIT:
BTW:
Link Manager is installed on the storage card. Can this be the problem?
My phone (signature)
Click to expand...
Click to collapse
I have it installed to my storage card, what is yours named?
Do you have a bluetooth sharing folder on your device? I've seen a issue where sometimes that folder is not always accessible and can cause errors when I traverse the file system.
dtsouers said:
I have it installed to my storage card, what is yours named?
Do you have a bluetooth sharing folder on your device? I've seen a issue where sometimes that folder is not always accessible and can cause errors when I traverse the file system.
Click to expand...
Click to collapse
Hi dtsouers,
my is named as: opslagkaart (dutch for storage card - system name)
>>bluetooth sharing folder
No it is a network sharing folder to get software from my server.
It is created with the Schaps_NetworkPlugin_1_0_30468_1.CAB
>>I've seen a issue where sometimes that folder is not always accessible and can cause errors
The network directory is NOT allways accessible.
Whoo linking managers; I like them!
Yet another nice application which I've added to my Feature Settings LNK overview page (hope you don't mind);
http://forum.xda-developers.com/showthread.php?p=5453046
TiP:
Direct SMS (I called it SMS2.lnk);
51#"\Windows\tmail.exe" -service "SMS" -to "" -body ""
Create a direct link for whatever telephone nr;
... see above thread,
Senax
mike2nl said:
Hi dtsouers,
>>I've seen a issue where sometimes that folder is not always accessible and can cause errors
The network directory is NOT allways accessible.
Click to expand...
Click to collapse
Tried it out on my Touch Pro 2. Its definitely the folders not always being accessible, now its time to see if I can get the remote debugging working.
dtsouers said:
Tried it out on my Touch Pro 2. Its definitely the folders not always being accessible, now its time to see if I can get the remote debugging working.
Click to expand...
Click to collapse
OK, dtsouers i will wait for your next release. The app is small nice and looks perfect for my needs.
mike2nl said:
OK, dtsouers i will wait for your next release. The app is small nice and looks perfect for my needs.
Click to expand...
Click to collapse
This new version should fix it.
dtsouers said:
This new version should fix it.
Click to expand...
Click to collapse
Hi dtsouers,
thanks for your aap update. I go to test this today in the evening in our time zone ;-).
REPORT:
Installed on the memory card. Program's 1st start needs a little bit more time.
I think it is the link searching function?
Updated:
I have to update my signature.
Now i have running the newest official htc ROM. This comes later on the day.
I will report later the rest of my tests, but so far so good.

[SOLVED] App to generate list of cabs installed to device?

I've got 'CabBatchInstall' on my device, which is useful, as it allows you to install a batch of cabs one by one to your device, after updating the ROM or doing a hard reset. You generate a list by pointing at the directory where you've stored them, and can then edit the text file down to only include the cabs you want to install, rather than the entire contents of the directory you've pointed at. See the application thread at http://forum.xda-developers.com/showthread.php?t=407885.
This got me thinking: Is there an app for 'interrogating' your phone to see what you have installed on it at a particular point in time? After all, what you have installed is listed at Settings > Application > Remove Programs > And if there is, or if not, but someone would produce this sort of thing, could it be made to 'talk to' or be an addition to 'CabBatchInstall', so that the list of installed apps is the one 'CabBatchInstall' uses to do the batch install after hard reset or new ROM?
Just so you're aware, I've made similar post to this on the application thread I've linked above.
you could try listing the folders in Windows\AppMgr to a text file - MortScript which should be capable of this
Thanks p107r0, but I'm a complete novice when it comes to programming, mortscript and everything like that.
Oh well, I suppose it was a nice idea...
thats an excellent idea for an app. Sometimes I'll finally have my device set up exactly the way i like but it usually takes me going through and doing alot of installing/uninstalling to figure out what i want to get to that point. Or i'll flash a nee rom and really only want the apps that i had previously. This would prove quite helpful. Before I always had to resort to going to the "remove programs" screen and from there i would just keep scrolling down the list of apps and take screenshots so atleast i would know what they were.
Yorkshire Yellow said:
Thanks p107r0, but I'm a complete novice when it comes to programming, mortscript and everything like that.
Oh well, I suppose it was a nice idea...
Click to expand...
Click to collapse
I was bored and curious if I can do it, so here comes short script which lists all the folders in Windows\AppMgr to a text file on storage card,
of course you'll need MosrtScript to run it
Wow, what a usefull script!!
I make an installation (cab file) of it.
After you have installed - you find it in Startmenue-> Tools-> AppList...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There you find two Icons:
-One Icon to Make (create) the List.
-And one Icon to Open (show) the List.
Enjoy it...
Thanks to both p107r0 & BOBO_01.
BOBO_01 - how might I change the save location of the AppList? I'd like to save it to my Cabs folder on my storage card? (i.e. \Storage Card\Cab files)
Yes a helpfull little app. I use also mort for my things, but i have never thought about these app. Thank you...
BOBO_01 said:
I make an installation (cab file) of it.
Click to expand...
Click to collapse
nice work, thanks
Yorkshire Yellow said:
how might I change the save location of the AppList
Click to expand...
Click to collapse
find the script file "AppList.mscr" and change the vDestFile in first line to your preferred path
PS
below update of the script, which should - hopefully - produce sorted output file
p107r0 said:
nice work, thanks
find the script file "AppList.mscr" and change the vDestFile in first line to your preferred path
PS
below update of the script, which should - hopefully - produce sorted output file
Click to expand...
Click to collapse
Thanks to all - have been looking fo a App like this. A little scary when you see the list - in my case 120 apps and still hoping for more. Every day something else appears to be "loaded up". Great work to everyone
Why dont you try sk tools? It does exactly what you want.
A question
p107r0 said:
nice work, thanks
find the script file "AppList.mscr" and change the vDestFile in first line to your preferred path
PS
below update of the script, which should - hopefully - produce sorted output file
Click to expand...
Click to collapse
Thanks. As a newbie to MortScript, where do I install the script to, and how do I change 'vDestFile'? would that be by using the MortScript App, which I installed to my deviceas per your post of 10 December?
Yorkshire Yellow said:
where do I install the script to
Click to expand...
Click to collapse
the script file itself can be run from anywhere on your device via File Explorer
if you installed the cab prepared by BOBO_01, copy the script to \Program Files\AppList folder - hope it should work from there
Yorkshire Yellow said:
how do I change 'vDestFile'
Click to expand...
Click to collapse
the easiest way is to open the .mscr file in any notepad application on your PC
I use SK Tools, very easy.
leunam12 said:
I use SK Tools, very easy.
Click to expand...
Click to collapse
SK Tools is for sure a very powerful set of utilities,
however in terms of price nothing beats the free stuff.
As for keeping track of installed apps, I prefer to just keep on my Storage Card an orderly folder with cabs (moreless similar to the structure used in XDA_UC), this way I always know what is installed and where, also whether it needs installing at all.

How to upgrade to Nokia DLOAD

1. Download the file
2. Change the extension of the downloaded file. Zip (should happen: RM803_12w07_prod_generic_updated_nokia_osbl.zip)
3. Open the file. It should contain two files. We take out the file «nokia_osbl.mbn».
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. Connecting the Nokia 710 to a computer in a mode of Qualcomm (Turn off the phone. Hold down the volume + and connect the USB). We wait until the removable drive will appear.
5. Download the program "HxD" ftp://wa651f4:[email protected]/HxDSetupEN.zip
6. Run as Administrator HxD. Click the "Advanced -> Open Disk." My phone number appears in the program as a "Removable Disk 1."
7. We find our phone number. Remove the check mark "read only". Click "OK". The section begins with a boot sector with number 1001. To quickly find the sector take advantage of the panels at the top.
8. Make sure it starts with a «0B 00".
9. We hide HxD open it phone.
10. Now open the file «nokia_osbl.mdn» HxD in and copy all its contents (you can press Ctrl + A and Ctrl + C).
11. Go back to HxD open the phone.
12. At the beginning of the sector in 1001, about the letters «0B 00" right click and click 'Insert the replacement. "
13. Save the changes.
14. Disable USB. We take out the battery. Turn on the phone. Now you can flash with the NCS. But in order to install custom firmware, you have to re-open mode of Qualcomm.
Only for Lumia 710? Can this work with Lumia 800?
ybregeon said:
Only for Lumia 710? Can this work with Lumia 800?
Click to expand...
Click to collapse
As far as I know you can update a Lumia 800 to DLOAD via the NCS. I'm not really sure why you would do this, though.
I am new in this field, but i you know a solution to DLOAD my lumia 800 with NCS, please share with me, cause i totally ignore how to do it. Thanks in advance
So, once upgraded to Qualcomm, if ever it needs to go back to Nokia DLOAD, just use these steps, am i right?
Good work, vova
babu.rajiv2007 said:
So, once upgraded to Qualcomm, if ever it needs to go back to Nokia DLOAD, just use these steps, am i right?
Good work, vova
Click to expand...
Click to collapse
you are right
Big Thanks
Man i love you, i was looking like crazy for this
ChrisKringel said:
As far as I know you can update a Lumia 800 to DLOAD via the NCS. I'm not really sure why you would do this, though.
Click to expand...
Click to collapse
Can you elaborate on how to do that?
The Power+VolUp and recover? OR some other trick?
Skrypek said:
Can you elaborate on how to do that?
The Power+VolUp and recover? OR some other trick?
Click to expand...
Click to collapse
Yes, please do elaborate. I'd like to convert the Qualcomm bootloader on my 800 to the DLOAD.
---------- Post added at 09:27 PM ---------- Previous post was at 09:25 PM ----------
ChrisKringel said:
As far as I know you can update a Lumia 800 to DLOAD via the NCS. I'm not really sure why you would do this, though.
Click to expand...
Click to collapse
I have the QC bootloader on my phone and I'm having a heck of a time trying to upgrade it to the Tango update. I feel like it's the QC bootloader that's somehow blocking me from using NCS. I have a thread for my problem http://forum.xda-developers.com/showthread.php?t=1734174.
I think if I can get the DLOAD on my phone then it can get stock upgrades...but at this point, my phone is stuck with an old version with no upgrade path.
Details please
Hi as a noob I'm weak but wanabee smart Not to waste my phone. In the tuto, at the end when suppose to paste. Should it be over what's already there if so then we need to select from section 1001 and paste over or else. I'm really not sure how to paste it caus' HxD does not give me the 'Insert the replacement
Thanks
RM-809
Hi, this is my first post here and I want to solve one question
I can use this process on my Nokia Lumia 710 RM-809?
I am from Brazil and here only sold the RM-809, branded ou unbranded.
Thanks
NCS doesn't recognize my phone
I upgraded to DLOAD from Qualcomm based on your instructions. That went well. But even now, Nokia Care Suite doesn't recognize my phone. I want to flash latest roms and don't need modded roms. Please let me know as to how I can do this. TIA
Edit: NM, I was able to do it.
6. Run as Administrator HxD. Click the "Advanced -> Open Disk." My phone number appears in the program as a "Removable Disk 1."
Click to expand...
Click to collapse
i've run HxD as administrator I can't seem to find "Advanced -> Open Disk."?
kingcartwright said:
i've run HxD as administrator I can't seem to find "Advanced -> Open Disk."?
Click to expand...
Click to collapse
Its in Extras / Open Disk.
hmm...Still no way to downgrade to Qualcomm?
hi
same as someone posted earlier
i cant seem to paste anything over the old file
i dont want to delete something i shouldnt
can anybody help?
answered my own question
i missed the bit where it said read only and untick
How do i insert replacement? I dont see the option under right click.
I am running HdX as admin and unchecked read only. I can see the option when in the downloaded file but on the phone side it is grayed out.
Can you explain better...
12. At the beginning of the sector in 1001, about the letters «0B 00" right click and click 'Insert the replacement. "
no image of this should i overwrite "0B 00" with all file's content, insert before "0B 00" or overwrite all the content of the sector 1001?
Thanks for the help
PS: no "insert the replacement" option. only paste/write
Sorry but... what is the difference between DLOAD and Qualcomm? Is one of those "better"? thanks.

Offline KDZ Update WORKING ON WINDOWS 64BIT

Hello guy's on Xda,
I read some of the KDZ updator Treads but din't found the good one for windows 8.
and since that the jelly bean has been releasd for the optimus L9 ( what my current phone is) and that my laptop was running windows 8 64Bit.
I did some research on Google and found this site and found this siteall4phones(dot)de handy and it also worked for me. :victory MAKE AND BACK-UP YOUR PHONE WILL BE WIPED
What you need:
An LG optimus L(9
USB
This software: View attachment KDZ_Flash-Package_LG.zip
IF you encouterd some problems feel free to ask
Instructions
First install the B2CAppSetup AND MSXML otherwise it won't work
1. Check first the Host-Datei that the last rule is: 127.0.0.1 csmg.lgmobile.com
2.Run KDZ Server start(an cmd command will open LEAVE THAT OPEN thats the progams thats fools LG support tool
3.Run windows enablers ( there will be an icon on the down-right corner click one time on it. it should turn on)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4.Run Up testEX mod2 marvin the first multi-select should be 3GCT the second one on EMERGENY you click finaly on
normal web upgrade an pop-up wil show just click on the start upgrade and there wil show an other pop-up select your country an language and wipe your phone and then click on update
5. Just wait until the flash is complete.
6. Your done you can close al programs an click on kdz server stop.
you can play on your flash phone
I am not responsible if this brick your phone or Explode or break it use it on your own responsibility
CREDITS:
FOR all4phones(dot)de for making the tut.
sorry if my english is bad i am only 16 years an i am Dutch. Cheers please hit thanks if helped
Re: Offline KDZ Update WORKING ON WINDOWS 64BITT
Lolgast said:
Hello guy's on Xda,
I read some of the KDZ updator Treads but din't found the good one for windows 8.
and since that the jelly bean has been releasd for the optimus L9 ( what my current phone is) and that my laptop was running windows 8 64Bit.
I did some research on Google and found this site and found this siteall4phones(dot)de handy and it also worked for me. :victory MAKE AND BACK-UP YOUR PHONE WILL BE WIPED
What you need:
An LG optimus L(9
USB
This software: View attachment 1810554
Instructions
First install the B2CAppSetup AND MSXML otherwise it won't work
1. Check first the Host-Datei that the last rule is: 127.0.0.1 csmg.lgmobile.com
2.Run KDZ Server start(an cmd command will open LEAVE THAT OPEN thats the progams thats fools LG support tool
3.Run windows enablers ( there will be an icon on the down-right corner click one time on it. it should turn on) View attachment 1810571
4.Run Up testEX mod2 marvin the first multi-select should be 3GCT the second one on EMERGENY you click finaly on
normal web upgrade an pop-up wil show just click on the start upgrade and there wil show an other pop-up select your country an language and wipe your phone and then click on update
5. Just wait until the flash is complete.
6. Your done you can close al programs an click on kdz server stop.
you can play on your flash phone
I am not responsible if this brick your phone or Explode or break it use it on your own responsibility
CREDITS:
FOR all4phones(dot)de for making the tut.
sorry if my english is bad i am only 16 years an i am Dutch. Cheers
Click to expand...
Click to collapse
This is just short version repeat of existing guide book, with no checkpoints and troubleshooting tips.
This is Repost.
Sent from P765 on JB.
hi͵
oke did you checkt files in the zip because the other file in other threads din,t work on my laptop and i read in other threats that tje kdz program crashes on win8 and this file isent if you read the instrution.
cheers
Lolgast said:
hi͵
oke did you checkt files in the zip because the other file in other threads din,t work on my laptop and i read in other threats that tje kdz program crashes on win8 and this file isent if you read the instrution.
cheers
Click to expand...
Click to collapse
some files here and there changed, but method is same. anyways nevermind.
cmahendra said:
some files here and there changed, but method is same. anyways nevermind.
Click to expand...
Click to collapse
ok, thanks for the tips
Well it is working without "clear phone software update registry" option. No xp compatibility needed.
I have windows 8 x64 and the other method always work well for me.
But thanks, is other choice.
Enviado desde mi LG-P760 usando Tapatalk 2
Old thread, but I wanted to say thanks and that this was the only one I could get working on Windows 10 x64. Was able to bring a P659 back to life.

Categories

Resources