I'm still new to the forum so I can't post anything in they development section but I tried flashing kitchen sink 1.3 but when it boots up it says UI system stopped pls if anybody knows a fix for that I would really appreciate if you can help me
Sent from my MB855 using xda premium
What options did you install? and was it MIUI or AOKP or CNA?
Dovigoldberger said:
I'm still new to the forum so I can't post anything in they development section but I tried flashing kitchen sink 1.3 but when it boots up it says UI system stopped pls if anybody knows a fix for that I would really appreciate if you can help me
Sent from my MB855 using xda premium
Click to expand...
Click to collapse
dont wipe before flashing the zip it needs to be flashed directly on top of a working rom and also whjich rom and options did you pick
i installed it thru aroma installer i picked all default i picked cna and i added beats audio and i picked full wipe
Beats audio, I remember reading with beats, soft keys, or the ics reloaded, usually well give it a problem. As someone else said, install on top of a working ROM and leave those options off. Shouldn't have a problem.
Sent from my MB855 using xda premium
This is what I did and it works perfectly
Must be on 198_6 or 198_7 - I wasn't so I SBF'd to 198_6
Before SBF if on something else run a factory reset from within CWM.
SBF to 198_6 or 7
Factory Reset from CWM
Boot into stock, Don't setup account, just update PRL and Profile
Boot into CWM
I wiped cache and data ONLY
flashing w/o wiping - CNA needs somethings to work right
Flash again
Flash Gapps Reboot, set up accounts
Enjoy
Soft Keys and ICS reloaded will cause boot loops. I chose beats audio, but I don't see it anywhere.
So far everything is good for me.
My MoPho's in the kitchen sink!!
Related
Hey guys hoping someone here can tell me what i may have done wrong. I currently run mr2.5 radio was playing with the dasbamf roms that are compatible and saw the gingerth30ry rom and flashed it. So its flashed over looked to be working awesome boot animation my home screen loaded up with the creepy wallpaper a few texts popped up but the kicker is this.....there are no other buttons and all or of the touch buttons on the bottom do not work. Anyone have any idea what gives here?
Wipe and flash again
Sent from my ADR6400L using XDA Premium App
ajacksonkid said:
Hey guys hoping someone here can tell me what i may have done wrong. I currently run mr2.5 radio was playing with the dasbamf roms that are compatible and saw the gingerth30ry rom and flashed it. So its flashed over looked to be working awesome boot animation my home screen loaded up with the creepy wallpaper a few texts popped up but the kicker is this.....there are no other buttons and all or of the touch buttons on the bottom do not work. Anyone have any idea what gives here?
Click to expand...
Click to collapse
Pulled directly from Th3ory's thread...
V4.5.1 WILL NOT WIPE!!! Wipe Cache/Dalvik FOR SURE. I recommend a FULL WIPE including Data/Cache/Dalvik and Under Storage And Mounts, Format /System also!!! But that is your choice now.
The BEST way to ensure NO issues is to FOLLOW THESE INSTRUCTIONS AND WIPE EVERYTHING!!!
This thread is for anyone/everyone with questions or problems with jokers CM9 or the ICS-MIUI that spleef/the_bill have been working on. The point is to try to clean up the Dev thread with the repeated questions/problems.
Here is the main thread:
http://forum.xda-developers.com/showthread.php?t=1413349
[Ics] cm9 beta with camera CDMA/GSM/UMTS/HSDPA/WCDMA/roaming 3/10/12
And here is the fixes and mods thread:
http://forum.xda-developers.com/showthread.php?t=1514963
Photon CM9/MIUI V4 Fixes and Mods
sent from my MIUI MoPho
So my unicorn won't crap rainbows. I fed it fruit loops and all it crapped was at most like three colors. Glitter is funny because it farts sparkles but the sparkles won't boot.
Ideas?
It'd be nice if moto would like sneak out some unicorn food.
Sent from my MB855 using XDA
How's this for a noob/newb question?
So I'm using a Photon 4G, which is on SBF 198_7, is rooted and unlocked (obviously), and for some reason absolutely refuses to boot the CM9 Beta. Currently I'm flashing 0.3.3 but previous attempts with .4 had the same result. I follow the instructions step for step (meaning I format system, cache, and data as well as perform a factory reset in CWM (running 5.0.2.7-photon3, although I've also tried the newest of the versions posted by Jokersax). When I install and reboot the phone sits on the red circle screen.
My logcat says:
exec '/system/bin/sh' failed: No such file or directory (2)
which to me is saying that /system may not be mounted at all.... I've read the CWM 5.0.2.8 has this problem but not with 5.0.2.7. Any ideas on what I should try to get past this issue?
Thanks!
maarekelets said:
So I'm using a Photon 4G, which is on SBF 198_7, is rooted and unlocked (obviously), and for some reason absolutely refuses to boot the CM9 Beta. Currently I'm flashing 0.3.3 but previous attempts with .4 had the same result. I follow the instructions step for step (meaning I format system, cache, and data as well as perform a factory reset in CWM (running 5.0.2.7-photon3, although I've also tried the newest of the versions posted by Jokersax). When I install and reboot the phone sits on the red circle screen.
My logcat says:
exec '/system/bin/sh' failed: No such file or directory (2)
which to me is saying that /system may not be mounted at all.... I've read the CWM 5.0.2.8 has this problem but not with 5.0.2.7. Any ideas on what I should try to get past this issue?
Thanks!
Click to expand...
Click to collapse
jokersax11 said:
Or just flash the rom twice
Sent from my MB855 using XDA
Click to expand...
Click to collapse
Try this first, of course.
If no worky, then this miggghhhtt:
This are the steps to be able to boot into 4.0:
1. Wipe everything as usual in CWM by Joker
2. Flash 0.3.1 and only 0.3.1
3. Reboot, into 0.3.1
4. Let it sit for 1 minute, mess around in it for that time.
5. Reboot into Recovery(CWM by Joker).
6. Flash 0.4.0, gapps and or the usual.
7. You can now reboot into it.
Or just flash the rom twice
Sent from my MB855 using XDA
jokersax11 said:
Or just flash the rom twice
Sent from my MB855 using XDA
Click to expand...
Click to collapse
The issue comes from wiping system
Sent from my MB855 using XDA
Thank You for that. It's booting now.
Curious, but what magic is performed on the 2nd flash that makes it bootable?
---------- Post added at 01:38 AM ---------- Previous post was at 01:27 AM ----------
jokersax11 said:
The issue comes from wiping system
Sent from my MB855 using XDA
Click to expand...
Click to collapse
Since the instructions for coming from another rom says to format system, should the OP on the dev thread mention the double flash issue or is this something that doesn't happen that often?
maarekelets said:
Thank You for that. It's booting now.
Curious, but what magic is performed on the 2nd flash that makes it bootable?
---------- Post added at 01:38 AM ---------- Previous post was at 01:27 AM ----------
Since the instructions for coming from another rom says to format system, should the OP on the dev thread mention the double flash issue or is this something that doesn't happen that often?
Click to expand...
Click to collapse
I'll update the op soon enough. However a proper update script is better in the long run
Sent from my MB855 using XDA
How necessary is jokers cwm? I've been using it for ages but it doesn't read my sdcard so I have to copy everything from SD to emmc . Been too lazy to go back to romracers and try it out but with the output of cm9 and miui builds I find myself rebooting out of recovery due to forgetting to move files quite often
Sent from my MB855 using XDA
thatguy07 said:
How necessary is jokers cwm? I've been using it for ages but it doesn't read my sdcard so I have to copy everything from SD to emmc . Been too lazy to go back to romracers and try it out but with the output of cm9 and miui builds I find myself rebooting out of recovery due to forgetting to move files quite often
Sent from my MB855 using XDA
Click to expand...
Click to collapse
Those recoveries are made every time I build. I need to make a specific recovery update thats got everything working
Sent from my MB855 using XDA
thatguy07 said:
How necessary is jokers cwm? I've been using it for ages but it doesn't read my sdcard so I have to copy everything from SD to emmc . Been too lazy to go back to romracers and try it out but with the output of cm9 and miui builds I find myself rebooting out of recovery due to forgetting to move files quite often
Sent from my MB855 using XDA
Click to expand...
Click to collapse
I've been using jokers cwm and everything is on my sd card. It reads it just fine. I have the newer v3 recovery. Once I choose install zip it gives me the menu for either sd card or internal, along with "update". I would use jokers recovery just cause it seems to work :beer:
sent from my MIUI MoPho
bullfrog527 said:
I've been using jokers cwm and everything is on my sd card. It reads it just fine. I have the newer v3 recovery. Once I choose install zip it gives me the menu for either sd card or internal, along with "update". I would use jokers recovery just cause it seems to work :beer:
sent from my MIUI MoPho
Click to expand...
Click to collapse
Odd. Can't imagine why it won't read mine. I've just tried v2 and v3. Several downloads and flashes of each.
No dice
I've also tried ext3 and ext4 sdcard.
Wonder if its because they are partitioned?
Its really not that big of a deal , just a few extra steps for me.
Edit : I take that back, it is kinda a big deal as nandroid won't work due to not being able to read my sdcard.
Sent from my MB855 using XDA
that is weird, maybe it is because you card is partitioned. You might want to try a different card or format your existing. I usually do that every month or so, just to clean it up
sent from my MIUI MoPho
So i installed 0.3.2 on Friday and i corrupted it somehow by restoring all my CM 7 apps and data with TB. Oh well live and learn. This am i see now there is 0.4 and a new CWM. Argh i cant keep up! You da man joker. Gotta read up on the 0.4.0 install. Thanks.
bullfrog527 said:
that is weird, maybe it is because you card is partitioned. You might want to try a different card or format your existing. I usually do that every month or so, just to clean it up
sent from my MIUI MoPho
Click to expand...
Click to collapse
well its not the fact that my sdcard is partitioned. I tried a new one, fresh download of v3 and multiple flashes. Still wont read them. Going back to romracer for now.
Its the oddest thing...
Sent from my MB855 using XDA
Huh, I'm all out of ideas bro. Sorry
sent from my MIUI MoPho
If yours won't boot..
This has been a similar issue for me on .4 and the version before.
If it seems like you followed the instructions but you are still stuck at the motorola dual core screen try installing one of these kernels. http://forum.xda-developers.com/showthread.php?t=1520417
They are at the bottom of the post and I used the 1.0 ghz one.
It solved the problem both times for me! Idk if Jokers' CM9 comes with a kernel or if you are supposed to track one down but this worked for me ..
OK a couple things with CM9 0.4.0 i'm noticing. These may or may not be known. Camcorder lags badly and then crashes everything. No macro option in the camera. Also, is there a way in ICS to have USB storage enabled by default when connecting to computer as it is in GB?
jbb2388 said:
OK a couple things with CM9 0.4.0 i'm noticing. These may or may not be known. Camcorder lags badly and then crashes everything. No macro option in the camera. Also, is there a way in ICS to have USB storage enabled by default when connecting to computer as it is in GB?
Click to expand...
Click to collapse
the camcorder is a known issue, and i dont know about the usb. i dont use it much. i use wifi file explorer to move anything i need to my phone.
OK thanks. Sucks that you need 3 keystrokes to turn usb on. Another thing I'm noticing is that once the phone goes to sleep the backlighting on the soft keys does not come back on. I wish i was smart as the devs to help with this stuff. I don't wanna sound like i'm complaining. Just making some bugs known.
Alright, we will start with a story - I am a fairly experienced root user. I had a fascinate, droid x, and now I have a thunderbolt. I had all three rooted and never had problems until now.
I have root access as well as a custom ROM on my thunderbolt. (I am currently using liquid 3.2).
The problem is that when I try to flash any other rom (I tried two: CM7.2 by ThunderShed and Infected by Virus) they do not work at all. I flash data, davik, and all that stuff. Infected gets stuck on HTC logo and CM7 gets further but freezes on startup after initial setup shows up.
My friend recomended flashing all different radios and I did that, but still having an issue. (I have 1.48.... and 0.0178... on now).
A few things.....check the md5 when you download. Wiping........wipe data/factory reset, then wipe cache, then go advanced and wipe dalvik cache, then go format/mount and format /system. Then install the .zip. If that doesn't do it, I have no idea, never had a problem flashing ROMs, only have problems once I start messing with them on my own.
I had to change to different recovery
Sent from my ADR6400L using xda premium
First, the roms do flash - just not boot up after. Both go through the process fairly well. Like I said - the only that actually works is Liquid 3.2, both Infected and CM 7.2 flash just get stuck at a different stage when booting up.
I'm going to download yet another rom and see whether that does it.
The recovery that I have is 5.0.2.1. I was going to install touch recovery and see if that was more reliable. I'll post later and see whether it was just the two roms possibly being bad (both downloaded from RootzWiki and not XDA).
Run superwipe after you wipe everything, then flash your rom.
Sent from my ADR6400L using XDA
Try flashing a stock kernel first.
I also had the droid, droidX, droidx2, incredible2, thunderbolt, and now the galaxy tab. Also fairly familiar with rooting and flashing, and I had the same problem and couldn't figure it out. My clockwork was out of date. Updated, and everything was right in the world again. Check your Recovery. I didn't think if the update during flash took that it was my recovery but I was wrong.
flashing problem...
did you make sure usb debugging is on, and allow mock locations and non market downloads, and try deleting the current infected rom and re-download it just to make sure it was a clean download...i love the infected roms, especially eternity with darkhorsetheme. if that doesn't do it idk man. best of luck and try to get a hold of a developer maybe
Thank you guys!
Alright, so first off - I made sure my recovery was up to date.
I did wipe format /system and that caused infected to load, but after about an hour of using it - it froze and then when I pulled the battery, it wouldn't go past HTC logo.
I did load CM 7.1 and that works well.
I'll keep digging at it and see if I can figure it out. Thank you everyone!
Did you ever find a solution? I am having the same problem. I have tried 3 roms. It starts the boot screen and then after a minute it reboots into recovery.
It's the recovery folks.
Cwm = fail
4ext = win
donnyp1 said:
Run superwipe after you wipe everything, then flash your rom.
Sent from my ADR6400L using XDA
Click to expand...
Click to collapse
Using super wipe fixed this issue for me. Even after triple wiping dalvik didn't work, super wipe did. :good:
i am stuck. i tried to flash super charged hatka 320 dpi and i have gone in the wrong direction because my dna doesnt boot up properly. after super hatka gets past the boot i am able to get to the lock screen and once i swipe to unlock, it says unfortunately settings have stopped working. my launcher doesnt work. i cant operate the phone what so ever except for looking at the settings. when i get a text message i can reply, but thats pretty much it. i have experience in rooting and flashing the htc g2, gs2, and the gnexus. but this htc dna is something different and i am having extreme difficulties. i can go into much more detail if someone has the moment to help me out
Maybe if you try to re-install the Rom will all be ok....it might solve the problem...did you do a proper wipe before flashing...and did you create a nandroid backup if so restore it in Recovery and then flash the Rom again...if. not first do a proper wipe and then reflash the Rom....I use viperdna so I don't know if you have after the install to flash any kernel,fix or something???check it first and then procceed with the other things..hope to helped yiu
Sent from my HTC Droid DNA
If you came from another ROM or Stock, Factory Data Reset from recovery is advised ... you could also try flashing another custom ROM to get moving
Djmk4 said:
Maybe if you try to re-install the Rom will all be ok....it might solve the problem...did you do a proper wipe before flashing...and did you create a nandroid backup if so restore it in Recovery and then flash the Rom again...if. not first do a proper wipe and then reflash the Rom....I use viperdna so I don't know if you have after the install to flash any kernel,fix or something???check it first and then procceed with the other things..hope to helped yiu
Sent from my HTC Droid DNA
Click to expand...
Click to collapse
i have tried to reinstall it, same problem. this happenes when aroma was finishing the install of the rom
<..simmer down..>
.
..
removing old init.d files...
sqlite3 exists
set_perm:some changes failed
installation failed
error
senseless slim super charged hatka dna v2.1.0
install failed
installer status: 7
i want to install a different rom, idc what rom, but i cant download anything, i tried chrome and iE but none of them will download any roms. does anyone have an alternate link to a rom that isnt linked here on xda?
and i was coming from stock. i certainly wiped cache and factory reset before flashing the rom. i used flash image gui to flash the bootimg and then wiped everything in cwm, the flashed module zip and then flashed the rom. thats pretty much what i did, i do appreciate your replies
dj2muchxx said:
i have tried to reinstall it, same problem. this happenes when aroma was finishing the install of the rom
<..simmer down..>
.
..
removing old init.d files...
sqlite3 exists
set_perm:some changes failed
installation failed
error
senseless slim super charged hatka dna v2.1.0
install failed
installer status: 7
i want to install a different rom, idc what rom, but i cant download anything, i tried chrome and iE but none of them will download any roms. does anyone have an alternate link to a rom that isnt linked here on xda?
Click to expand...
Click to collapse
What's happening mate...really can't help you...the only thing I suggest to write exactly what you wrote here in hatka's Rom thread...maybe the dev that made the Rom....can help you or someone might had the same issue
Sent from my HTC Droid DNA
What recovery are you using? I had an issue with twrp at first and switched to cwm touch. And no issues. I've had issues though by going back after getting stuck at boot and wiped then installed Rom with full wipe. But if its an error not installing might try fastboot flashing a different recovery
Sent from my HTC6435LVW using xda premium
dj2muchxx said:
and i was coming from stock. i certainly wiped cache and factory reset before flashing the rom. i used flash image gui to flash the bootimg and then wiped everything in cwm, the flashed module zip and then flashed the rom. thats pretty much what i did, i do appreciate your replies
Click to expand...
Click to collapse
I think it might be a problem with the download I will fix it later today
Sent from my HTC6435LVW using xda app-developers app
fixed
i may have had a bad download. i was using the 320 dpi senseless rom, my phone was unusable like i had stated, but i managed to get it running.
here is what i did to fix it:
in the settings, i linked my dna with my google account, and as i expected, i received play store notifications about updates, so i chose the notification and it took me to a fully functioning play store.
i downloaded apex launcher and it installed properly. pressed the home button and it automatically set itself as the default launcher and bam! my dna was beginning to function.
downloaded xda app and went to the super charged thread and downloaded the slim version of the rom instead of the senseless rom.
flashed the boot.img, flashed the modules, then flashed the slim rom and i didnt get any errors or failed messages this time.
i dont want to point fingers and i would never do that here on a fantastic community, but the senseless rom was giving me issues, maybe it just needs some more work. anyways phone is functioning like normal now, everything works and the battery is outstanding so far.
thank you to those for the advice. i was getting ready to call it quits and send this thing back to amazon wireless.
MustafaHadaKing said:
I think it might be a problem with the download I will fix it later today
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
i think it was just the rom, if u need a guinea pig to test out your rom or anything, im in. i am enjoying super charged hatka very much:good:
Hello xda Forums,
I was messing around with themes in ADW.Launcher on my Droid X2 Running CM7 and the theme was corrupt and crashed my phone. My phone boots up fine, but the minute i unlock my phone i get a error saying "ADW.launcher has stopped unexpectedly. I can't access setting to fix this. I can only access my drop down with GPS, BATTERY, VIBERATION icons, and connect my phone to USB. I also can't access clock work mod to wipe/devik cache, and factory reset. When i plug my phone into a charger from the wall my phone wont boot up clock workMod. I can't access clockwork mod any other way. I can access Android Recovery and Wipe cache or Factory reset, but i was goign to ask what is the best way to fix this problem? I don't want to factory reset just yet in case that will mess the phone up more..
Please help! I am running out of ideas. I was thinking of install another launcher manually Via usb, so i can at least get into my phone.
you might be able install a different launcher, from pc with play store
Sent from my XT862 using Tapatalk
sd_shadow said:
you might be able install a different launcher, from pc with play store
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
Thanks man that help me a ton i successfully pushed go ex launcher to my phone to repair it thanks!
great, now install the cm7 bootstrap
MOTODX2_Bootstrap-CM7-signed.apk
sd_shadow said:
great, now install the cm7 bootstrap
MOTODX2_Bootstrap-CM7-signed.apk
Click to expand...
Click to collapse
Hey man,
I installed bootstrap recovery and opened it up and it said it install correctly. I rebooted my phone and it was stuck at the CM7 loading screen. I can't get into Clockwork mod recovery, so i booted into Android recovery and wipe the cache. Now i am stuck on the red Motorola screen with a non-bootable phone. I am not sure what to do right now?
I only have two options in Android recovery
-Wipe data/factory reset
-Wipe cache
- load from update which i do have Cm7 backup, but i am not sure that will load correctly?
What should i do at this point. I am just trying to load my phone back up normally in my CM7 rom.
sd_shadow said:
great, now install the cm7 bootstrap
MOTODX2_Bootstrap-CM7-signed.apk
Click to expand...
Click to collapse
update: i wiped data/ factory reset and wipe cache and i still can't get pasted the Motorola logo? What should i do?
not sure what caused problem, but you need to sbf now
Sent from my XT862 using Tapatalk
sd_shadow said:
not sure what caused problem, but you need to sbf now
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
Thanks i did that and it seems to be working fine! .. I was using the CM7 rom can you recommend an another good stable rom like CM7 that has no missing features compared to the stock rom. I picked cm7 because i didn't loose to many features from the stock rom. CM9 and CM10 looks like i can't use some features if i flash these roms. I am looking for a good stable rom that I wont loose to many features from my phone. I was looking at eclipse, but never tried it.
cm7 and eclipse are the only really stable roms for the dx2
if you want eclipse 2.3, phone base needs to be updated to stock 2.3.5, or you can try eclipse 1.3 on 2.3.4 base
link in my list
sd_shadow's [Collection] of Links for Droid X2
Sent from my XT862 using Tapatalk