Hey I just switched to cm and I'm loving it but I'm really missing the stock reader app. I still use my nook for reading and the nook app from the market just isn't the same. Is there an update.zip or API floating around I can install to get the stock reader app installed?
- and can someone move this to the q &a session .. my bad
akasoldats said:
Is there an update.zip or API floating around I can install to get the stock reader app installed?
Click to expand...
Click to collapse
i've been reading the NT forum for months and have heard none mentioned. . okay but just think about it for a second. the stock NT uses hardware acceleration very well ( a thing of beauty ) . . . its the stock 'firmware' that makes the books look so nice ! . . not the stock app . . . the senior devs have 'not' got cm9 tweaked out ( punked out ? ) with hardware acceleration. . . cross your fingers, the new binary level guru in europe will get it ! ! !
old_fart said:
i've been reading the NT forum for months and have heard none mentioned. . okay but just think about it for a second. the stock NT uses hardware acceleration very well ( a thing of beauty ) . . . its the stock 'firmware' that makes the books look so nice ! . . not the stock app . . . the senior devs have 'not' got cm9 tweaked out ( punked out ? ) with hardware acceleration. . . cross your fingers, the new binary level guru in europe will get it ! ! !
Click to expand...
Click to collapse
Fair enough. I have no complaints about cm9 I know it is very alpha. I just feel robbed reading books now... especially since a lot of the content I read isn't from B&N so now I have to force the app to find it.. with all that said cm is still worlds better than stock.
I use coolreader myself and it works perffectly well on CM7 for me. But then again I never bought any books from B&N as I have a ton of books I have gotten else where that I need to read.
I've tried downloading the generic B&N apk for Android devices, and it didn't work well. Forced-closure, hanging, etc.
I'm using Mantano now which I like very much. Of course, when I want to just focus on reading I'll still revert to my Nook Simple Touch with stock reader.
The issue that I ran into is that the stock app (which I got from the aclaim update I believe, it's been a while) requires a certain version of Adobe Air to run correctly, in addition I do believe it uses the hardware acceleration (can't confirm this) so if your versions aren't the right sort, and certain files aren't correct, it runs like hell. I gave up on it personally.
DemonicPhantasm said:
The issue that I ran into is that the stock app (which I got from the aclaim update I believe, it's been a while) requires a certain version of Adobe Air to run correctly, in addition I do believe it uses the hardware acceleration (can't confirm this) so if your versions aren't the right sort, and certain files aren't correct, it runs like hell. I gave up on it personally.
Click to expand...
Click to collapse
care to point me to it?
Let me look and I'll see if I can dig it up again.
It's not possible due to framework incompatibility, so if you're not in stock it won't work. B&N apps depend on the stock framework like stock samsung apps and widgets depend on samsung framework.
Conclusion use the B&N app from google play and a 3rth party reader or go back to stock
~ Veronica
innumerabilis said:
I've tried downloading the generic B&N apk for Android devices, and it didn't work well. Forced-closure, hanging, etc.
I'm using Mantano now which I like very much. Of course, when I want to just focus on reading I'll still revert to my Nook Simple Touch with stock reader.
Click to expand...
Click to collapse
I'm using the Google Play version of the B&N Nook App and it works flawlessly for me. No force closing or hanging at all.
Agreed. The NOOK app from the Play Market has been flawless for me, reading primarily ePub documents without DRM.
Sent from my Nook Tablet using XDA
Related
Dear Toshiba Folio 100 user.
I have created this thread to use it as a place it discuss all ideas, suggestions, problems, improvements about this device. In this way we can clean some of the general issues in the Dexter ROM thread.
Regards
Marcelo
Applications using the big screen ?
Looking for the best (screen usage) for email and calendar.
The email client in 1.0b is the default one for Android, looking at the email client in Samsung Tab its much better at using the big screen. Also the Folio is much better with white/light background as the "stock" email-client does not have.
Any pointer to a better app ?
The calendar app is much better and uses the screen much better.
Please write about your experiences with apps that works with big screens and works good on the Folio.
/\/\artin
where do you find email client samsung???
Using Startup Manager, would it be possible to disable the phone service or would that result in a nuclear explosion or something like it? i mean, is android dependant on it one way or another, or would it be safe to disable it?
why foliomod ?
Hi to all
mhgonzalez great idea to create this "general" post.
I bought two folio for as Christmas gift, now they are hidden .. but, when I can, I do some test.
I never used android till now but I'm trying to understand why I should install foliomod. During my little usage I didn't find any bug, I only wasn't able to open a ebook (.epub) using the default reader (and I have put the file in the Books folder, anyway) but I suppose it's only because I need to improve my "knowledge".
But at the moment no bugs where find, all the apps installed work properly, wifi it's ok and, after I installed flash plug-in, browsing is ok too.
Not only but I was able to find the few app I saw googoling around the web.
What the folio mod make me able to do more than this ?
mhgonzalez said:
where do you find email client samsung???
Click to expand...
Click to collapse
It can be downloaded from
www(dot)gunsforgeeks(dot)com/Email.apk
but it does NOT work on the Folio
/\/\artin
[FIX] Background picture correctly scaled.
Download the app "Multipicture Live Wallpaper" from the market, enable it, and set the background image you want in the settings. YAY! HiRes background
picture
ma1999 said:
It can be downloaded from
www(dot)gunsforgeeks(dot)com/Email.apk
but it does NOT work on the Folio
/\/\artin
Click to expand...
Click to collapse
That is one of my frustrations. The current email.apk on the folio, as well as the calender, look pretty terrible. In email, I can't even scroll through the different emails, everytime I have to open a message, read, close and open the next. Even on the (rather basic) email.apk on the Galaxy S I have small arrows on top with which I can scroll through to the next or previous message. The Galaxy-TAB email.apk doesn't work (well) on the SGS either.
Also, Samsung have another email-client from com7, I'can;t get that version installed ( a specific Samsung version with great HTML-email-presentation, but alas, missing scroll-arrows also). I'll check the com7-site to see if they have a more general Android version of their email-app and come back on that one.
So if anyone has an other email.apk which works on the Folio, let me know.
kakkio said:
Hi to all
mhgonzalez great idea to create this "general" post.
I bought two folio for as Christmas gift, now they are hidden .. but, when I can, I do some test.
I never used android till now but I'm trying to understand why I should install foliomod. During my little usage I didn't find any bug, I only wasn't able to open a ebook (.epub) using the default reader (and I have put the file in the Books folder, anyway) but I suppose it's only because I need to improve my "knowledge".
But at the moment no bugs where find, all the apps installed work properly, wifi it's ok and, after I installed flash plug-in, browsing is ok too.
Not only but I was able to find the few app I saw googoling around the web.
What the folio mod make me able to do more than this ?
Click to expand...
Click to collapse
Dear Kakkio.
Modding the most important in my case was to be able to download application from Android Market, reason why the Toshiba Market is a joke. It depend on what will you do with the Folio. If it is only to browse internet and reading book, dont mod. If you need more, I recomend to mod.
dear mhgonzalez
tnx for your answer, in a few word you give me axactly the info I needed.
Mainly I'll use the tablet to read, listen music, watch video and browsing... but I like to "play" so, after a few, I'm sure I'll go to install foliomod...
In this moment I'm installing android emulator on my ubuntu in order to get a little bit more involved.
TnX again
Kakkio
I quote a post from "pekka91166" from the dexter section because I think is perfect for this section ...
"...I agree with one of the earlier posts on Android (especially Tegra2) tablets versus others, including iPad.
If you're simpoly looking for a tablet which works and works very well, get yourself an iPad. And accept it's a pretty much closed OS.
If you're looking for a working Android tab, go for the SGT, although I'm not sure how well the TAB is working.
With all these tegra2 tablets, we're in for some disturbing months. Right now, these products all seem to suffer from pre-release firmwares which haven't been adapted well enough to the powerful (and partly cheap) hardwarechoices the various suppliers have chosen.
In the case of the Folio100, I knew very well I was buying a product with factory-default rubbish FW, but after reading Dexter's posts I figured it was worth trying, playing, failing and reinstalling.
All in all, I'm happy with the Folio, it's definitely NOT the product is should become, but pretty decent workeable and, last but nost least, FUN (and irritating at the same time).
I just hope Toshiba will, at some point, come with an acceptable FW AND that, in the meantime, Dexter and others will be able to cook some nice firmwares based on 2.2.
The Folio FEELS at some point very powerful, so the Tegra2 should be able to perform, but most of the times it seems lazy. For me a clear indication its the firmware of the machine. Unfortunately, it's a bit the same with a Galaxy S-phone. Powerhouse, but the firmware (2.2) is yet not there to unleash the full power.
Let's hope we'll get 2.3 running on our Tosh and that it supports dual-cores. I expect until then we'll have a nice (and often frustrating) toy to fiddle around with....."
why mod?
For me the big disappointment with the Folio was that none of the Google stuff worked and I expected this from a device with Android.
Dexter has fixed this with his mods and now i can see all my picassa pics in the Gallery, my contacts calendar and email all sync perfectly. Try Google maps with the street view addin and zoom down streets, spin around, it is the sort of app that the tablet excells at.
He has also fixed the Market and there are plenty that are free and work great like tunein radio, some are worth paying for like Bria if you want a good sip client.
I have gone for the v2 mod as it seems to fly, It is not perfect but it is 1000% better.
Others have found v1 mod better for their use. Dexter has made it easy to try them and roll back and has proved to be adept at fixing issues with easy to apply updates , he can also be stimulated with his Donate button, Early reports are that the other tablets arriving with Froyo are hardly better than stock Folio all crippled at birth. Anyway I am grinning. I had a Nokia N800, ****e at first but then the second os release brought it to life and included a cpu overclock. Some have said we are not using both cores properly so I am looking forward to the next Android even if we have to stimulate Dexter to make it work again
but after foliomod I'll found the original apps ? or I have to re-install them again ? or I'll found others ones ?
and if toshiba will create a FW upgrade I'll have to roll-back to the original state to install it?
sorry for the stupid questions
modding
kakkio said:
but after foliomod I'll found the original apps ? or I have to re-install them again ? or I'll found others ones ?
and if toshiba will create a FW upgrade I'll have to roll-back to the original state to install it?
sorry for the stupid questions
Click to expand...
Click to collapse
Some will be there and some better ones have been included plus you have acess to the market where you should find everything you need , this is a bit trial and error but people will hopefully post reports of apps that work well on the folio. Yes you would have to go back to stock rom to get the Tosh update. Hah lets see if that comes:
Hi!
Somehow I got stuck in the Foliomod V01...
When I'm in system recovery trying to upate to a later version I only get:
E:Can't mount DEFAULT_PATH
Finding update package
Opening update package
E:Can't open /sdcard/update.zip
(No such file or directory)
Installation aborted.
Formatting MISC:...
When I choose: apply sdcard:update.zip
The same message pops up.
Anybody who has got an idea, how to fix this?
stuck
I would delete the update.zip and put a fresh one there, check on the pc that the zip opens and is not corrupt. Ian
sweeterhome
this launcher looks awesome, i'm gonna try it on the folio and see if it's sucessful =)
http://www.sweeterhome.com/
kakkio said:
dear mhgonzalez
tnx for your answer, in a few word you give me axactly the info I needed.
Mainly I'll use the tablet to read, listen music, watch video and browsing... but I like to "play" so, after a few, I'm sure I'll go to install foliomod...
In this moment I'm installing android emulator on my ubuntu in order to get a little bit more involved.
TnX again
Kakkio
Click to expand...
Click to collapse
Kakkio
Hello from Argentina, I see you are Italian, my mother is Italian from Calabria, and my best friend here is Italian who is working in the Italian consulate in my city (Fabio Zarzaca).
More my little daughter is studing in an Italian school called Da Vinci School.
Regards and enjoy your devices.
Marcelo
Anybody know a way to use bluetooth for tethering, like it's possible with the archos tablets?
I've got 2 phones here wich are capable of making a dial up connection, but they are not as advanced as complete smart phones.
First is a LG GD510 POP and the second is a Samsung U600. Neither phone has a wlan connection, so it must be connected through bluetooth.
I can make a bluetooth connection with either of them and can send files and contact cards to them, but a tethering connection is not (yet) possible.
I know in the archos tablets, there is a possibility to tether, but in the folio (and mods) it's not.
Searching only delivers solutions, where the android device is the phone and a pc is the client or where a connection is made through wifi.
jbbrans said:
I know in the archos tablets, there is a possibility to tether, but in the folio (and mods) it's not.
Click to expand...
Click to collapse
i dont there is any need to compare other hardware platforms..
the you could say Windows7 works fine with flash, but my android does not..
or my milestone works quite wll too, but still not same platform...
Best is put into accepting Toshiba/Nvidia is still work in progress, other major companies seems to plan using tegra2 and then we will for sure see much better support..
Toshiba released the folio100 too quick, comparing to Malata T2 which is still not out, as they realize its not in an acceptable state, although Nvidia is helping them to improve, they have yet to release their tablet and provide updates.
Hi,
The Lenovo Android Tablet is released. It comes with the same n-trig digitizer technology as in the Flyer. It has apps with handwriting recognition such as VisionObjects Notes and maybe DocsToGo ( 5'30": http://androidcommunity.com/lenovo-thinkpad-tablet-hands-on-video-20110719/ ) which are quite handy.
It would be wonderful if our community can extract and port those apps to the Flyer (through ROM or apk). I am not in IT so I hope that the work can be done by someone here.
Cheers.
(I don't know whether the Development Forum is a correct one to post things like this. Mod please move the thread to other forums if necessary.)
We will need a leaked rom first..
nickiberli said:
We will need a leaked rom first..
Click to expand...
Click to collapse
What he said.
Oh, and a Hex-Rays Decompiler, lol.
ikingblack said:
What he said.
Oh, and a Hex-Rays Decompiler, lol.
Click to expand...
Click to collapse
Hex-Rays decompiler?
nickiberli said:
Hex-Rays decompiler?
Click to expand...
Click to collapse
Google it. People are donating so this team called iDroid can get a Hex-Rays Decompiler to put Android on the iPhone.
Maybe this Lenovo Tablet Dump will do it?:
http://forum.xda-developers.com/showthread.php?t=1252957
Edit: I just took the notesmobile_len-oem.apk and notesmobile_len-data-de_DE.apk(for german language) from the dumb.
They installed fine on my GB 2.3.3 Flyer but once I'm starting the app it ays that this version of notes mobile is not compatible with my device.
Could someone simply check if it works on a HC flyer?
Edit2: Just removed the device check... However - it still crashes right after start - anyone who wants to try my version without device check? Maybe it is running on honeycomb.
cool software.hope can get it soon
I hope someone will do it, it seems great.
Well - like I said:
I can share the notesmobile apk to anyone who is running honeycomb on the flyer.
I eventually also removed the device check.
But since I haven't moved to honeycomb yet - I can't try. :-/
Himmig said:
Well - like I said:
I can share the notesmobile apk to anyone who is running honeycomb on the flyer.
I eventually also removed the device check.
But since I haven't moved to honeycomb yet - I can't try. :-/
Click to expand...
Click to collapse
Please, do it! A lot of people have already moved to HC
Try the following:
1. Install Notesmobile_len_oem.apk
2. Install the language pack (eg notesmobile_len-data-en_GB.apk)
3. Put the two lib files in your "system/lib" folder if possible
4. Run the notesmobile application for the first time. --> If you get a "device not supported error" continue with 5.
5. Uninstall notesmobile (keep the language pack and lib files in place)
6. Install notesmobile_len-oem-signed.apk
7. Run the notesmobile app (this version should ignore the device check)
@Himmig, got FC on process com.visionobjects.notesmobile_len
I also got the same force close.
I wanna know can man use it on GB?
Sent from my HTC Flyer P510e using xda premium
Anybody tried WritePad, and another one is PenReader? It seems to be a pretty decent handwriting recognition app. It works like a keyboard, so can be used in any app. I hope it will be even much better on the Flyer with Honeycomb.
Anybody using Flyhigh ROM has been succesful to run this application?
well the problem is the following;
1. The flyer has 2 x touch film layers which work on different voltage readings. However the main touchscreen has the ability to detect both voltges, and hence why it can trigger into notepad mode when the pen nibbles touches the screen.
2. The the application itself is designed to work on a different android framework... This would need to be modified to sense.framework as otherwise they just won't compile well together. You also have to modify the application source code to accept the pen voltages instead of fingers...
Unless you want to use fingers too? If so that is another bastard in itself to set up with the pencils interface.
I've tried with SBM to see if the pen could be modified to write with it etc, and but failed, and hence I believe we need afew development to work on this.
Sent from my HTC Flyer P510e using xda premium
update your flyer to HC and buy writepad : you won't need to port this app anymore
Are people trying to get Notes Mobile to work or the handwriting recognition text input to work? Or both?
For those still getting force closes on Notes Mobile, I monitored logcat and found that you need to push the following into /system/lib/:
libMyScriptEngine.so, libMyScriptHWR.so, and libStylusCore.so
If you're running Himmig's modified apk, then it should be fine. If you're just using the apk straight from the system dump, then build.prop needs to spoof the Lenovo Thinkpad Tablet.
I've been playing with Notes Mobile on my Flyer for a couple of days, and handwriting recognition is quite spiffy. As a note-taking app, I still like HTC Notes better since it syncs with Evernote and it's just integrated better. You could export to HTC Notes from Notes Mobile though.
I actually don't know if the handwriting IME is part of the system dump. Is it there?
Thanks for the input mate... I should have looked at logcat :-/
I'll try if it works and see if the modified apk is able to surpass the device check... however - could you post your build prop modifications?
Ok so I have CM7.1 Alpha3.5 on the TouchPad. It's decent. However, it's just a blown up phone ROM with some tweaks to make it usable on a screen this large. This means that there's no panes in Gmail or other tablet optimized apps.
Now, I don't mean to diminish the work that has been done to things like the overlay for the buttons - that is really a slick implementation - but is there any way/place to get the tablet optimized versions of apps onto this thing instead of the phone versions of the apps? Or should I just shut up and wait for ICS to come out soon?
EDIT: Sigh. Mod, you can move this to the General section. My bad.
I was thinking of installing this, but if what you say is the case (all the apps will be like they are on the phone) then I guess I will wait til an ICS port comes out. I just REALLY want the Android apps on the Touchpad.
Install it! You have nothing to lose. You can boot into webOS OR CM7 via the startup menu.
Don't let one guy's complaints stop you.
Oh by all means install it. Its crazy fast and in a worst case scenario you lay an easier foundation for installing ICS when it is available. You don't have to use Android - this will get you dual booting.
If your talking about google music or netflix tablet versions, if you edit the device id to something like GT-i900 it will load up tablet versions.
At least this has been my experience...
jzen said:
If your talking about google music or netflix tablet versions, if you edit the device id to something like GT-i900 it will load up tablet versions.
At least this has been my experience...
Click to expand...
Click to collapse
Hmmmm... Can I do this on the device itself or adb to it or what?
Build.prop using a text editor of some kind will do the trick
Sent from my SAMSUNG-SGH-I777 using Tapatalk
In my situation, I've had the exact opposite occur: too many apps have told me to purchase the tablet version of their apps, such as SwiftKey for one. Netflix comes up as the tablet version, and i dunno about Gmail, but it doesn't bother me none if it's the phone view, it still works fine.
Sent from my SAMSUNG-SGH-I777 using xda premium
Really? I edited my building prop to the Galaxy 7 wifi only since it has same resolution as Touchpad using and is wifi, only. All my apps look gorgeous. Typing on SwiftKey Tablet right now. GT-P1010 Samsung, i used root explorer to and just edit the build prop right on your Touchpad. I think es file will work too
Sent from my GT-P1010 using xda premium
etnpnys said:
Ok so I have CM7.1 Alpha3.5 on the TouchPad. It's decent. However, it's just a blown up phone ROM with some tweaks to make it usable on a screen this large. This means that there's no panes in Gmail or other tablet optimized apps.
Now, I don't mean to diminish the work that has been done to things like the overlay for the buttons - that is really a slick implementation - but is there any way/place to get the tablet optimized versions of apps onto this thing instead of the phone versions of the apps? Or should I just shut up and wait for ICS to come out soon?
EDIT: Sigh. Mod, you can move this to the General section. My bad.
Click to expand...
Click to collapse
Those tablet versions are for .Honeycomb OS we use gingerbread
Sent from my Touchpad using Tapatalk
FirstNoobToBrickHisPhone said:
Those tablet versions are for .Honeycomb OS we use gingerbread
Sent from my Touchpad using Tapatalk
Click to expand...
Click to collapse
Yeah I understand that - but I'm asking if there's a way to install the honeycomb/tablet versions. It sounds like, from everybody else, that we can with a simple edit of the build.prop file.
I will give it a shot later! Thanx everybody!
Well if anyone knows how to get the Plume Tablet version to run with a build.prop setting that would be great.
etnpnys said:
Yeah I understand that - but I'm asking if there's a way to install the honeycomb/tablet versions. It sounds like, from everybody else, that we can with a simple edit of the build.prop file.
I will give it a shot later! Thanx everybody!
Click to expand...
Click to collapse
Fyi there is a huge difference between "tablet version(hc)" and " tablet optimized " tablet optimized works on larger screen gb units( like our tp)
tablet version is intended for honeycomb devices with the appropriate framework and can only be loaded on honeycomb os.
The reason why ppl are needing to edit the build.prop is for the app/market to recognize our device as a compatible device/hardware on a "tablet optimized " app.
No matter what u do a "tablet version" application will not work on a "phone version " os.
If it were that easy to install a hc application, the current fragmentation would not exist within androids, and ics would not be that important coming out.
Just a food for thought rant since I'm seeing so many God damn threads about this matter lol..
Thanks for listening
Sent from my HTC Glacier using Tapatalk
Honeycomb source was never released so we are stuck with a phone optimized version of Android until we can get an CM9/ICS ROM. There are new APIs etc in Honeycomb that won't allow those apps to run in Gingerbread even if you somehow force installed them. You can find some apps that will display a tablet UI. Here is a few of ones I use that run a tablet UI:
Netflix (really nice tablet UI update that is working great)
OfficeSuite Pro 5
Maxthon Browser for 10" Tablet
Firefox (tablet UI can be enabled in about:config)
What I look for is apps that have tablet screenshots or have been updated for ICS yet the same version also runs on GB.
spunker88 said:
Honeycomb source was never released so we are stuck with a phone optimized version of Android until we can get an CM9/ICS ROM. There are new APIs etc in Honeycomb that won't allow those apps to run in Gingerbread even if you somehow force installed them. You can find some apps that will display a tablet UI. Here is a few of ones I use that run a tablet UI:
Netflix (really nice tablet UI update that is working great)
OfficeSuite Pro 5
Maxthon Browser for 10" Tablet
Firefox (tablet UI can be enabled in about:config)
What I look for is apps that have tablet screenshots or have been updated for ICS yet the same version also runs on GB.
Click to expand...
Click to collapse
so once we have an ics port we will have something that functions just like honeycomb does on the current tablets?
For those who want a swype style keyboard, try TouchPal keyboard tablet edition. I may install it in update.
Sent from my HTC PucciniLte using Tapatalk
What exactly should i put in build prop? Which line to edit and what to put?
Thx
Netuser said:
What exactly should i put in build prop? Which line to edit and what to put?
Thx
Click to expand...
Click to collapse
There is a video somewhere in the forums. There are two lines you need to edit. I know what to enter, but can't remember the exact name of the lines that are changed.
Here is a link to the video: http://forum.xda-developers.com/showthread.php?t=1381728
GT-I9100 and Samsung are the edits. It still won't let you download too many tablet apps as this is a phone port, but it still rocks.
Sent from my GT-I9100 using Tapatalk
spunker88 said:
Honeycomb source was never released
Click to expand...
Click to collapse
Actually the Honeycomb source was released, it's included with the ICS source.
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
This release includes the full history of the Android source code
tree, which naturally includes all the source code for the Honeycomb
releases. However, since Honeycomb was a little incomplete, we want
everyone to focus on Ice Cream Sandwich.
Click to expand...
Click to collapse
But since ICS is here nobody cares about Honeycomb anymore.
redhooka said:
Actually the Honeycomb source was released, it's included with the ICS source.
http://groups.google.com/group/android-building/msg/c0e01b4619a1455a?pli=1
But since ICS is here nobody cares about Honeycomb anymore.
Click to expand...
Click to collapse
More importantly, the HC releases are not tagged, so it is all random guessing as to which ones correspond to the HC builds..
Hey people of xda
so i just got my GNexus a few days ago and im totally back into the android scene already! Gots me some AOSP rom on it and root
Anyways, i tried out firefox / fennec now that my phone should be quick enough to use it properly (unlike my G1 ) and i realized it doesnt support flash. So according to mozilla wiki, it is only supported on 2.3, and on a bugreport i read that it isnt planned to be supported on 3.0 / 4.0, due to adobe dropping support on flash.
Anyways, i am wondering how hard it would be to get ICS supported for flash on firefox? I tried putting the flashlib in the plugin folder of aurora, etc. didnt work of course, since it's a problem in the sourcecode.
I realised that on youtube, flash seems to work! It doesnt actually display a flash missing warning or anything like that, on all the other sites.
So i was wondering if that is actually a flash implementation or a custom youtube player by mozilla right there?
Can anyone investigate? I don't have an IDE with all the fennec stuff set up, so i can't check on that. Would be awesome to get aurora with flash though, since it renders stuff really fast and it has a nice and smooth interface
https://wiki.mozilla.org/Mobile/Platforms/Android#Download_Aurora
I think the YouTube player is html5... I May be wrong
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Freemantig said:
I think the YouTube player is html5... I May be wrong
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
you are indeed right i totally forgot about this, but im pretty sure since the interface looks a tiny bit different from the flash version.
Anyways, i headed to a mozilla "plugincheck" site, which gave me the message:
"for safety reasons, firefox has disabled your obsolete version of flash. Please update to a newer version" (translated it directly from the german version though, lolz. but you get the idea)
I guess we have a hint right here! How do we get aurora to NOT disable flash?
(I still dont have the sourcecode set up anywhere, im a lazy person.)
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums & Read the Forum Rules
Moving to Q&A
I want to use my nook tablet to develop and debug android applications.
Is this possible? How can I do it?
I can't find how to send the application to my nook tablet from eclipse.
Hope someone can help. =)
Edit:
BTW I'm running Cyanogen Mod 7 on my nook tablet.
yes it is possible ( of that i am certain ) and sorry - no i don't know how. . . it's an extremely BIG subject and (probably ) needs its own forum area... if you google it , you get ten thousand things to read... and it would be critical to have ADB up and running and happy first. i've read some very nice reviews ( on amazon ) of : Wei-Meng Lee's book - Beginning Android Application Developement. maybe i'll scratch up twenty bucks and buy a copy and report back to you...
.
hmm, isn't 'sending applications' the same as 'sideloading' ? . go watch that video on utube. http://www.youtube.com/watch?v=4axv2jXBR-M
Check out an app called "Aide." Nice app for app development on android devices. Though, itll be a right pain in the ass with the nook as we don't have Bluetooth so no Bluetooth keyboard.
As for pushing from eclipse, check out this article over on android developers: http://developer.android.com/guide/developing/device.html
Sent from my Xoom using Tapatalk
old_fart said:
yes it is possible ( of that i am certain ) and sorry - no i don't know how. . . it's an extremely BIG subject and (probably ) needs its own forum area... if you google it , you get ten thousand things to read... and it would be critical to have ADB up and running and happy first. i've read some very nice reviews ( on amazon ) of : Wei-Meng Lee's book - Beginning Android Application Developement. maybe i'll scratch up twenty bucks and buy a copy and report back to you...
.
hmm, isn't 'sending applications' the same as 'sideloading' ? . go watch that video on utube. http://www.youtube.com/watch?v=4axv2jXBR-M
Click to expand...
Click to collapse
Nope it isn't the same. Apart from sideloading you have to be able to debug the application in your device.
That means, being able to run the application instruction by instructions while running it on your device.
I'm gonna keep trying to make it work. =) Thanks for the replies.