[Q] White HTC bootloop? - HTC Rezound

Hi Everybody-
Last night I went to unlock my phone, and it froze. I'm running leaked ICS firmware, and it has been working fine for weeks. So, pulled battery, restarted, and it would not boot past the white HTC screen.
So far I have tried-
F
lashed a new kernel in fastboot
Restoring a backup (and flashing appropriate kernel)
Re-installing the rom and reflashing kernel
Still won't boot past white HTC screen.
I'm on the new firmware, so I thought I'd try to reflash the RUU. I have the PH98.. file on the SD card, it reads it but won't give me the option to flash, just returns to bootloader.
At this point i'm stuck, is there a way to force the RUU to flash? Should I think about getting S-OFF and trying to flash back to the GB RUU?
Thanks for any help!!!!!

Do s-off. DO NOT UNLOCK AFTER S-OFF. Then run gb ruu twice. Try booting back up after if no luck on the ruu then run in fastboot mode fastboot oem writesecure 3 and send in for a warranty replacement
Sent from my ADR6425LVW using XDA

Thanks! I appreciate the response. I still want to try to get the RUU to take without s-off, not sure what's up with that. Good call on not unlocking after s-off, maybe that will make the RUU take.

You could try running the ruu exe on windows if you haven't tried it yet.
Sent from my HTC Vigor

So, an update-
I flashed the RUU through fastboot (thanks, con247), it went fine but it still just shows the white HTC screen, goes black, then shows the white HTC screen again.
I am going to try unlocking again, flashing a new recovery and reinstalling a basic rom. At this point though, I have a bad feeling.
Has anyone seen anything like this!?!?!? It seems like something internal tweaked, but what would cause only that part (i guess \system, \data or something) to fail?
Thanks all for any help!!!

iaRIVR said:
So, an update-
I flashed the RUU through fastboot (thanks, con247), it went fine but it still just shows the white HTC screen, goes black, then shows the white HTC screen again.
I am going to try unlocking again, flashing a new recovery and reinstalling a basic rom. At this point though, I have a bad feeling.
Has anyone seen anything like this!?!?!? It seems like something internal tweaked, but what would cause only that part (i guess \system, \data or something) to fail?
Thanks all for any help!!!
Click to expand...
Click to collapse
Can you get back to fastboot by holding power and volume down? If so get to command prompt through platform-tools then type fastboot boot boot.img
that should hopefully get you to your rom. Thats what worked for me anyway.

If that fails
iflawdya said:
Can you get back to fastboot by holding power and volume down? If so get to command prompt through platform-tools then type fastboot boot boot.img
that should hopefully get you to your rom. Thats what worked for me anyway.
Click to expand...
Click to collapse
if you dont know the button combination use ADB
ENTER
ADB REBOOT FASTBOOT
or try
ADB REBOOT RECOVERY
then press your home key for a few seconds. choose wipe data. then reboot
hope this helps.

I helped him last night and the issue was resolved.

con247 said:
I helped him last night and the issue was resolved.
Click to expand...
Click to collapse
You the man!

con247 said:
I helped him last night and the issue was resolved.
Click to expand...
Click to collapse
Having the same problem with a friends phone...could you give some instruction on what you did?

If your on the GB firmware, run the Ruu.exe, you should be able to pull the battery and run from fastboot.
If your on an ics leak, con worked some magic so I could s-off, then run the GB Ruu. Check to see if wifi works, mine is c still broken and I will have to get a clnr. The easiest fix might be to just call for a replacement.
Sent from my ADR6425LVW using Tapatalk 2

Related

S-off achieved, but now phone's a brick

I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
lithium630 said:
I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
Click to expand...
Click to collapse
Get one of the old GB RUU's and run it on your phone. Start again. If your phone was truly bricked, it wouldn't power on and you wouldn't get an LED light when it was plugged in.
lithium630 said:
I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
Click to expand...
Click to collapse
This is an easy one, or would have been when you were on the black screen. Well the internal storage fix scares me, but hopefully that wont matter. Typically all you need to do is get the PH file from your rom and place on sd card, boot into hboot, and run the update I believe, then reboot.
This title needs to be edited as it's misleading.
lithium630 said:
I managed to get s-off, but my phone would not boot. I was stuck on a screen that said "JuopunutBear" with an arrow. I did the internal storage fix, now the phone is really screwed. I'm stuck on a white screen with "HTC". I can't boot to recovery and the PC won't recognize phone so ADB commands don't work. Any help would be appreciated.
Click to expand...
Click to collapse
Relax. The S-off process blows out your recovery. You didn't brick your phone.
Put a recovery image on your SD card, go into hboot (from a powered down state, power button and volume down) and let 'er reload recovery. If you can't get the file on your SD card through your phone, pop the SD card into a card reader attached to your PC and stick it on there that way.
Once that's done, remove the image file from your SD card, put your fav ROM on it, and install it from recovery.
You may need to fix your SD card's mount points. Within the thread on S-off, there's a link to the process.
None of the commands work because the phone is not recognized. I cannot boot to hboot. Uh oh.
I had the same screen. Pull the battery and reboot into hboot, volume down+power and run the s-off program again. Something didn't finish and it will pick up where it left off in my experience.
lithium630 said:
None of the commands work because the phone is not recognized. I cannot boot to hboot. Uh oh.
Click to expand...
Click to collapse
What happens when you press power+volume down?
Edit: Also, if you're phone turns on, you're not bricked. It's pretty hard to brick this phone.
tekhna said:
What happens when you press power+volume down?
Edit: Also, if you're phone turns on, you're not bricked. It's pretty hard to brick this phone.
Click to expand...
Click to collapse
Yeap just pull the battery and power on with power and volume down.
This kinda stuff you'll be fine with. Just don't get too creative with "repairs" that aren't posted in here.
tekhna said:
What happens when you press power+volume down?
Edit: Also, if you're phone turns on, you're not bricked. It's pretty hard to brick this phone.
Click to expand...
Click to collapse
As I understand it, the only way to brick a phone is to bork a radio installation.
Dude...pull your battery, put it back in, then power and volume down at the same time. If you can get to hboot, life is good.
After about 30 battery pulls I was able to get to hboot. I have no idea what the issue was. Finally got the phone booting now. I appreciate the replies.
lithium630 said:
After about 30 battery pulls I was able to get to hboot. I have no idea what the issue was. Finally got the phone booting now. I appreciate the replies.
Click to expand...
Click to collapse
Awesome, glad to hear. Did the s-off work?
tekhna said:
Awesome, glad to hear. Did the s-off work?
Click to expand...
Click to collapse
Sure did. Took me a little while to get the wire trick right. I just noticed the sd card is not recognized. I see the fix on the thread. That will be tomorrows project.
Constant reboots
I am able to install roms, but I get constant reboots, every few minutes at best. I tried a few different ICS ROMS. I am running the latest firmware. I BELIEVE with s-off I shouldn't have to flash PH98IMG.zip. I tried fixing permissions also but it has not helped.
How did you get the latest firmware and radios without running the PH98IMG.zip? The ics roms you are installing won't update your firmware.
Sent from my ADR6425LVW using Tapatalk 2
Chillerman said:
How did you get the latest firmware and radios without running the PH98IMG.zip? The ics roms you are installing won't update your firmware.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
I relocked the phone and updated it a couple weeks ago. Maybe I need to try it again.
lithium630 said:
I relocked the phone and updated it a couple weeks ago. Maybe I need to try it again.
Click to expand...
Click to collapse
Well the newest leak came out 5/7 and the one before that 5/2 so only a week ago. I would download the newest from Android Police and follow the instructions they give to install, then flash a recovery and install a rooted Rom for this firmware like Scott's.
Sent from my ADR6425LVW using Tapatalk 2
lithium630 said:
I relocked the phone and updated it a couple weeks ago. Maybe I need to try it again.
Click to expand...
Click to collapse
I don't know why you relocked...I think there's a thread about not so good things happening to those who relock after S-off. I downloaded and installed the 5/5 leak as PH98IMG after I S-off'd and reflashed the recovery.
I'm pretty sure my hboot said "locked" straight out of the gate after I did the S-off deed.
douger1957 said:
I don't know why you relocked...I think there's a thread about not so good things happening to those who relock after S-off. I downloaded and installed the 5/5 leak as PH98IMG after I S-off'd and reflashed the recovery.
I'm pretty sure my hboot said "locked" straight out of the gate after I did the S-off deed.
Click to expand...
Click to collapse
Nothing bad happens, you just don't ever get back to "locked" without doing S-off again. You're just at "relocked" like the old days. S-on with an eng hboot on the other hand will brick your device.
That aside, there's no need to unlock if you're S-off. Either flash a patched hboot or just flash a PH98IMG.zip of AmonRa if you don't need fastboot commands (I did the latter).
I flashed the last firmware before S-off. I followed the instructions given. I flashed the latest firmware today and this damn thing still reboots constantly. I flashed the 5-7 firmware then the Venasaur Rom.
lithium630 said:
I flashed the last firmware before S-off. I followed the instructions given. I flashed the latest firmware today and this damn thing still reboots constantly. I flashed the 5-7 firmware then the Venasaur Rom.
Click to expand...
Click to collapse
You need to try installing the radio firmware or just install the complete RUU again. And install a clean copy of the rom, not a nandroid backup. Wipe data, cache, dalvic cache, and system before flashing the rom.
Send me a private message if you would like and I'll help you get it figured out on gtalk.

EVO 3D Cannot Get Bootloader, Just Recovery...HELP!

I cannot get into regular bootloader. It just either sits and stalls, goes to HTC screen, or just straight to recovery. This has happened on and off before but I was always able to get it after a few tries. I've been trying for 2 days since the new ICS was released by Sprint but it's been no go.
I believe I have 1.5 Hboot, but I can't tell for sure because I can't access it. I had to take the long route when I had to root with the HTC unlock thing, etc.
I've tried to get to HBoot using QuickBoot app and using the menu option within TWRP 1.1 and now 2.2 (thought that might be the problem, but guess not)...still just stalls and nothing happens after reset
I've been using only rooted OTA's on my phone and only rooted for bloatware removal and wifi tether. No custom roms. No ICS leak.
The buttons of course work. As soon as I take my finger off of the Down volume button, the phone will activate and boot up normal in some cases.
I don't know if this is causing other issues with my phone as it self reboots or freezes a few times a week. I was looking forward to ICS update because I was hoping it would fix the reboots and freezing. Everything else works fine with the phone.
Any help would be greatly appreciated.
try "adb reboot bootloader" and see if your phone gets into bootloader.
mnomaanw said:
try "adb reboot bootloader" and see if your phone gets into bootloader.
Click to expand...
Click to collapse
Don't you have to be in Bootloader to get the adb commands to work? I tried using fastboot to connect and no go.
brokenmouse said:
Don't you have to be in Bootloader to get the adb commands to work? I tried using fastboot to connect and no go.
Click to expand...
Click to collapse
Look under settings/battery or power saver and uncheck fastboot?
Then you can actually get into hboot.
AFAIK, adb commands work in android, fastboot commands work in bootloader.
just make sure USB DEBUGGING is checked in settings.
When that happens to me, I remove the battery for about a minute, put it back in, hold down volume down, then hold power. It will boot right to bootloader.
Save the Drama for your Mama with Tapatalk 2
coal686 said:
When that happens to me, I remove the battery for about a minute, put it back in, hold down volume down, then hold power. It will boot right to bootloader.
Click to expand...
Click to collapse
This caused a lot of trouble for me trying to flash MeanRom and Tribulattifather's ICS OTA with 4EXT because it kept trying to go into bootloader after the install to do the "smart install" or whatever. The phone would just black out upon reboot and sit there or if I tried doing bootloader manually, it would go straight to recovery again. I was up until 4 in the morning trying to get my phone to fully boot last night...never did.
Brought my phone to work today and left it off nearly all day. I thought I was seriously screwed and would have to do a RUU update/unbrick from work. Lo and behold it went into bootloader first try.
I'm restoring a backup now through TWRP 2.2 (because it doesn't have the smart install feature). We'll see if
What do you think is causing these problems? I don't want anything crazy...just a solid ICS rom or rooted OTA. Most ROMs I read suggest using 4EXT to flash, but I'm afraid of running into this again. Any suggestions or thoughts?
as mentioned above, installed the TWRP 2.2 from bootloader and restored a backup (that worked a long time ago). Now i'm having the same issue I had last night. It won't boot up at all except to recovery again.
For most people, being s-off is the best thing to do. S-on and ICS tend to bootloop. For some reason, 4ext and flash image GUI don't seem to work well in ICS either for some.
Have you tried flashing a GB ROM?
Save the Drama for your Mama with Tapatalk 2
I'm going to have to figure out how to get back to complete stock. Everytime I flash a rom...doesn't matter what it is, the phone will say the flash is done, then reboot to...NOTHING...just a black screen. I've let it sit and nothing happens.
Followed a guide on androidcentral that had a nice restore to stock guide. Did the RUU from my computer and now it's acting normal again. It must've been really messed up because when I had it talking to ADB and did the reboot reloader command (as someone stated), the screen was solid black, though the RUU still saw it.

[Q] Unab;e to install ICS RUU before installing Nils' Business

Hey everyone,
So I have successfully HTC Unlocked my Rezound bootloader, installed Amon Ra, and then installed and booted the CM9 unofficial. Problem was that CM9 wasn't quite as cooperative as I'd hoped - it is unofficial, after all, and so I decided to abandon that in favor of Nils' Business ROM. Here's where I ran into issues.
I have tried everything in every order I can find online and think of, including Nils' writeup. So, for the life of me, I cannot get the leaked ICS RUU to boot (4.03.605.2 as listed in his instructions on XDA). Install runs fine every time I do it from the relocked (I checked) stock HBOOT, all steps included. Every time it reboots (and I've tried forcing it back into hboot to do the install a second time) it just goes to the white HTC screen and starts boot looping. Tried it a million ways, no go. Also worth noting - the stock recovery doesn't install properly, either. Some'fin is hinky, here.
So I've tried just "assuming" it went fine anyhow and then proceeding with the install for Nils' ROM and same deal, no go, although with one difference. With Nils' ROM, it does display the boot splash screen "Nils Business ROM" or what have you about 1 out of every 4 "boots" in the loop cycle, and then reboots again.
I think I am going to perform S-OFF tomorrow if I have the time, and then try it again using the S-OFF instructions, but I would sincerely appreciate any help from you all. Honestly, I'm at near wit's end with this device, and I don't want to be, I enjoy this chase too much, but I *really* want the reward at the end of it, lol.
Any help is deeply appreciated.
- Katie
Re: [Q]
I'm guessing because of the corrupted recovery, you have a bad download of the RUU. Try re downloading and check the md5 hash for a match. The ruu should reboot itself after the first pass and end up in bootloader again for the second pass.... If not then after the first pass just hold down power + vol down to get back to bootloader.
Hope this helps
Sent from my ADR6425LVW using xda app-developers app
Make sure that you have a booting ROM before you s-off. You will cause yourself all kinds of heartache if you don't.
Using an sd card reader on a pc, check md5 of your RUU zip file. If it checks out good, put the sd back in your rez and do an hboot power on and accept the update again. Report back with your findings. Also you will need to re-unlock your hboot after and install your recovery again.
Snuzzo said:
Using an sd card reader on a pc, check md5 of your RUU zip file. If it checks out good, put the sd back in your rez and do an hboot power on and accept the update again. Report back with your findings. Also you will need to re-unlock your hboot after and install your recovery again.
Click to expand...
Click to collapse
Hey, thanks. Yeah, the RUU does check out just fine against an MD5SUM.
nm.... just read your original post again and you say you did relock the phone. I was hoping it was something simple like that that was overlooked.
Carry on...
feralicious said:
Nothing to see here, folks, move along.
Click to expand...
Click to collapse
Right now, I cannot S-OFF because it requires a working stock image, and I'll be lucky to get anything more than CM9 unofficial working here.
You're too fast, now my bad post lives on...
So, when theh RUU failed, you unlocked again, flashed a custom recovery and tried to flash Nils' ROM?
Do you have a nandroid you can try to restore? Even if its the cm9 ROM at least to see if you can get it back to a working phone?
feralicious said:
You're too fast, now my bad post lives on...
So, when theh RUU failed, you unlocked again, flashed a custom recovery and tried to flash Nils' ROM?
Do you have a nandroid you can try to restore? Even if its the cm9 ROM at least to see if you can get it back to a working phone?
Click to expand...
Click to collapse
Well that's the trick. CM9 didn't work well enough to even be worth backing up. I'm trying to reinstall it again now just to see if I get there - and it looks like I will. Once I'm back up with that, I'm not sure where to go from there. The phone barely worked under CM9. Really hoping to get Nils' ROM on there, since it gives all the nice features of a stock device without the bloatware. Even if I never get S-OFF, I'll be perfectly happy with just Nils' software.
How about this... did you wipe everything before running the RUU? There's CleanWipe in the Development forum you can flash it from recovery and it will wipe everything 5 times!
This shouldn't make any difference, but there's also a different RUU, the OTA that's not global. You might try that one instead. I'm convinced that sometimes things are just voodoo even when they should be completely logical. That's definitely the case at work on the Avid systems I use.
Here's the link to it:
http://androidfiles.org/ruu/?dir=Vigor
feralicious said:
How about this... did you wipe everything before running the RUU? There's CleanWipe in the Development forum you can flash it from recovery and it will wipe everything 5 times!
This shouldn't make any difference, but there's also a different RUU, the OTA that's not global. You might try that one instead. I'm convinced that sometimes things are just voodoo even when they should be completely logical. That's definitely the case at work on the Avid systems I use.
Here's the link to it:
http://androidfiles.org/ruu/?dir=Vigor
Click to expand...
Click to collapse
I did try wiping everything first. No luck. I will try the CleanWipe tomorrow, because right now, whatever my issues are, I'm being prevented from solving them since I can't S-OFF and I can't even seem to get a working ROM to make the phone worth having! Ugh.
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Flyhalf205 said:
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Click to expand...
Click to collapse
Oh yeah! Try that. Someone else was having trouble and did it that way and it worked. Here's instructions, just make sure you use PH98IMG and not whatever is used in the instructions since it was written up for a different phone.
http://androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
Also, once you get your phone back to stock make a nandroid as soon as you flash the recovery again so you'll have that to go back to if you have any more issues.
Flyhalf205 said:
And you can try installing it under fastboot oem ruu instead of the ph.zip file
Sent from my HTC Rezound...
Click to expand...
Click to collapse
Thank you, your magnanimity! Seriously, lol, you're gracing my thread just by being here. :victory:
feralicious said:
Oh yeah! Try that. Someone else was having trouble and did it that way and it worked. Here's instructions, just make sure you use PH98IMG and not whatever is used in the instructions since it was written up for a different phone.
http://androidforums.com/incredible-all-things-root/487280-easier-way-flash-pb31img-files.html
Also, once you get your phone back to stock make a nandroid as soon as you flash the recovery again so you'll have that to go back to if you have any more issues.
Click to expand...
Click to collapse
Thanks for the clicky, Feralicious. Same results, unfortunately. I'm going to try doing the RUU flash of Nils' ROM instead. Do you guys know where I can get the ICS firmware by itself? I cannot be sure that it's actually flashed right, unfortunately.
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Flyhalf205 said:
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Click to expand...
Click to collapse
I'll do that stuff and let you know. Thank you!
Yes, I am on 2.27 HBOOT.
Point of interest, though possibly unsurprising. When I send the lock command, it locks and reboots, but says "Failed" in my command window screen. Sure this is probably normal since the phone might just reboot before responding to the computer, but possibly an issue.
I believe that is the image I tried before, but I'll do it again both ways to be certain and report back soon! :good:
ncc74656m said:
Yes, I am on 2.27 HBOOT.
Point of interest, though possibly unsurprising. When I send the lock command, it locks and reboots, but says "Failed" in my command window screen. Sure this is probably normal since the phone might just reboot before responding to the computer, but possibly an issue.
I believe that is the image I tried before, but I'll do it again both ways to be certain and report back soon! :good:
Click to expand...
Click to collapse
My DNA said something about failing when I locked it. But it locked just fine.
Since it is failing.
fastboot oem rebootRUU
fastboot oem lock ----if unlocked
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
Should work Maybe
Flyhalf205 said:
Your HBOOT is 2.27 and it should say relocked????
It should since you flashed the 4.03.605.2 RUU. The only RUU you will be able to flash since your S-ON is the one found here http://www.androidfilehost.com/?fid=9390034591667978440
The other RUU will fail because you can't downgrade. So the link above(The Global RUU) will that fail or completely install 100%??
If it does install 100% and boot loops still. Take out the sdcard. Boot into the HBOOT and perform a factory reset inside of HBOOT/Fastboot(NOT IN RECOVERY)
Report your status
Click to expand...
Click to collapse
Ok, so, this part including a factory reset got me to "HTC Quietly Brilliant" screen, but then it bootloops again. Tried factory resetting again to no avail. Trying the second part.
Flyhalf205 said:
EDIT
The link listed above for the RUU. Other way of installing it which is a great way to look at the status of everything.
Boot into Fastboot
fastboot oem rebootRUU
fastboot oem lock
fastboot flash zip rezound_AndroidPolice_4.03.605.2_PH98IMG.zip
fastboot reboot
Click to expand...
Click to collapse
Same thing as before unfortunately. :/ Performed a factory reset afterwards to be safe - no go. Everything shows OK though in both this and the above install. *shrug*
Flyhalf205 said:
EDIT2:
If you can't get it installed or it did. Just go ahead and unlock again. Flash custom recovery. Install a rom. Flash the boot.img in fastboot. Factory reset. and then see if it boots. If still not working. hit me up on google chat [email protected]
Click to expand...
Click to collapse
Proceeding with another attempt at installing CM9, I guess. Maybe the first one got hosed. If I get it booting in any form, I'll Nandroid it before trying anything else.
ncc74656m said:
Proceeding with another attempt at installing CM9, I guess. Maybe the first one got hosed. If I get it booting in any form, I'll Nandroid it before trying anything else.
Click to expand...
Click to collapse
I really wouldn't see why you would need a Sense rom to get s-off. I would imagine it would just need su and busybox installed. But nandroid then try a sense rom again. Make sure you flash the boot.img through fastboot

Screen Replacement - Phone won't boot

Replaced the screen on my Rezound and now I cannot get past the HTC white splash screen.
I can get in to BOOTLOADER and I found the VIGOR image on the SDCARD. It attempts to install but still can't get past the HTC splash screen.
Any help would be appreciative.
Is your phone rooted/unlocked? Can you get into fastboot or recovery? What ROM were you running?
acejavelin said:
Is your phone rooted/unlocked? Can you get into fastboot or recovery? What ROM were you running?
Click to expand...
Click to collapse
I was running CleanROM Standard. S-ON, with root. If I go in to RECOVERY the screen hits the HTC Flash then goes blank.
Thanks for the quick reply, hope to get back up and running soon.
Something is definitely messed up, so you can't even get into recovery?
Sounds like you lost your flash somehow. Can you "fastboot boot recovery.img" of TWRP or Amon Ra (I assume you were using AR since you were on CleanROM), and browse the partitions and see if the files are there? My best guess is you are gonna have to start clean, flash recovery, flash rom, fastboot flash boot boot.img, and see what happens. If that fails I would look at flashing the corresponding RUU to your Hboot version.
Ok.. I will give it a try. I have the Rezound All-In-One Toolkit, so I should be able to do this without any issues.
If I am wrong in my assumption, please let me know.
AzBrewsky said:
Ok.. I will give it a try. I have the Rezound All-In-One Toolkit, so I should be able to do this without any issues.
If I am wrong in my assumption, please let me know.
Click to expand...
Click to collapse
Ok.. This is what happened.. I removed my SDCARD and loaded BOOTLOADER. I went in to FASTBOOT and ran Hasoon's All In One kit for the Rezound and flashed recovery. I attempted to go in to RECOVERY and I get a blank screen. What I did notice is the loading bar on the right side of the screen never showed it was loading anything. The phone went to black screen, then nothing.
Until I can get in to RECOVERY, I can't load a ROM.
I even went to the command prompt and attempted to run it there, with no luck.
Update: OK.. I thought I would start over with the All In One tool. Seems my token key had changed. I got a new TokenID file from HTC and unlocked the bootloader (even though it was already unlocked) and ran the recovery. But I still get the same issue when entering in to recovery...
FML..
Skip the all in one tool kit... it's nice but you need to do this manually. Use the Fastboot commands to BOOT recovery manually, not flash it.
fastboot boot recovery.img (or whatever the name of the recovery image file is)
acejavelin said:
Skip the all in one tool kit... it's nice but you need to do this manually. Use the Fastboot commands to BOOT recovery manually, not flash it.
fastboot boot recovery.img (or whatever the name of the recovery image file is)
Click to expand...
Click to collapse
Manually attempted everything.. Lock, Unlock, fastboot boot, fastboot flash recovery, and nada..
AzBrewsky said:
Replaced the screen on my Rezound and now I cannot get past the HTC white splash screen.
I can get in to BOOTLOADER and I found the VIGOR image on the SDCARD. It attempts to install but still can't get past the HTC splash screen.
Any help would be appreciative.
Click to expand...
Click to collapse
I replaced my screen and had EXACTLY the same problem. My phone was fine for a couple of days and then this problem started. I have tried fastboot, loading zips from the ext card, everything you have tried except Hasoon's AIO. Nothing worked. I am also S-on & rooted. I was running Infection 8.2.1 and TWERP 2.6.3.0. I haven't flashed anything in many weeks. I didn't install any new apps. When I boot I get the htc flash screen for a few seconds and then a black screen.
geronimo48 said:
I replaced my screen and had EXACTLY the same problem. My phone was fine for a couple of days and then this problem started. I have tried fastboot, loading zips from the ext card, everything you have tried except Hasoon's AIO. Nothing worked. I am also S-on & rooted. I was running Infection 8.2.1 and TWERP 2.6.3.0. I haven't flashed anything in many weeks. I didn't install any new apps. When I boot I get the htc flash screen for a few seconds and then a black screen.
Click to expand...
Click to collapse
So you are in the same boat as I.. Nothing has worked..
I bought a used phone from Craigslist and have it running now.. I will be installing a ROM soon and then claiming insurance on the busted phone and pay the extortion fee to get another one.. I will end up with two Rezounds (I love this phone) and rooting them both and either have one for a backup or sell it to a friend for pennies on the dollar (what are friends for?)..
Otherwise I now consider it dead.. I will trash this phone to insure my insurance company can't start it to see that it has been rooted. Screw them..
Best of luck on your phone, but I have spent too much time on this one.. Better luck next time for us both..
MODS - CLOSE THIS THREAD

HTC EVO 3D - Long Story - Trying to get back to GB with issues (Details in thread)

Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help

Categories

Resources