Related
A few moments ago I was trying to flash the stock ICS firmware to my SGH-I757M using Odin3 v1.85.
But, I made a serious mistake. I didn't notice that "Re-Partition" was checked for some odd reason. The flash failed.
I then restarted Odin and put my phone back into download mode and proceeded to try to re-flash the stock firmware.
It failed yet again.
This is the log from Odin:
Code:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I757MUGLH2_I757MOYCLH2_I757MUGLH2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> boot.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The phone now shows the following error: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
I tried flashing just CWM and that won't work either. Kies also does not connect to the phone.
CharlieMPK said:
A few moments ago I was trying to flash the stock ICS firmware to my SGH-I757M using Odin3 v1.85.
But, I made a serious mistake. I didn't notice that "Re-Partition" was checked for some odd reason. The flash failed.
I then restarted Odin and put my phone back into download mode and proceeded to try to re-flash the stock firmware.
It failed yet again.
Click to expand...
Click to collapse
See if this helps
ysrini said:
See if this helps
Click to expand...
Click to collapse
So, I read through the guide and it does not refer to the SGH-I757M.
Is there something that I'm missing? I don't want to further my issue.
I bricked my SGH-i757m galaxy s2 hd lte
I tried to install Cyanogenmod 10 onto my sgh-i757m but it seems I may have used the wrong links to download the .zip files. I followed standard procedure in recovery mode (factory reset, clear cache) and instead of rebooting my phone just turned off. I had plenty of battery life (over 50%) and I cannot even start recovery mode!
No download mode, no recovery & no signs of life from phone ? Try a jig (highly unlikely to work). Also try King Rat's 'hotboot' method to try & jump start the phone (search). Otherwise, service centre for motherboard replacement or perhaps try a JTAG repairer (assuming it can be JTAG'd).
After looking at many XDA pages and other android related forums I have not found a problem to my solution which has left my phone unusable for two months.
My phone is stuck at the Samsung boot screen, it is not looping, it just stays there when the phone turns on - indefinitely, I CAN enter both recovery mode and download mode (a lot of people with similar problems cannot enter recovery) but when attempting to flash anything at all I get a NAND write start failure regardless of the cable, computer and version of Odin I use. I have attempted to use a few PIT files but these get stuck at the "REPARTITION" stage and I am forced to unplug the phone to try again. The phone is rooted and I cannot as many of you will know send it back to Samsung (still in warranty) due to the flash counter being greater than zero.
If there is any further information required please ask.
hawkar13 said:
After looking at many XDA pages and other android related forums I have not found a problem to my solution which has left my phone unusable for two months.
My phone is stuck at the Samsung boot screen, it is not looping, it just stays there when the phone turns on - indefinitely, I CAN enter both recovery mode and download mode (a lot of people with similar problems cannot enter recovery) but when attempting to flash anything at all I get a NAND write start failure regardless of the cable, computer and version of Odin I use. I have attempted to use a few PIT files but these get stuck at the "REPARTITION" stage and I am forced to unplug the phone to try again. The phone is rooted and I cannot as many of you will know send it back to Samsung (still in warranty) due to the flash counter being greater than zero.
If there is any further information required please ask.
Click to expand...
Click to collapse
Which recovery?
What else does it say in Download mode?
wangdaning said:
Which recovery?
Click to expand...
Click to collapse
CWM recovery
rootSU said:
What else does it say in Download mode?
Click to expand...
Click to collapse
Here is the log from Odin v3.07 using a stock rom:
==================================================================================
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMC2_I9300OXAEMC2_1042335_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
==============================================================================================
Service repair Nand damaged .
jje
Sorry, I meant on the phone screen
Sent from my GT-I9300 using Tapatalk 2
Did you get any further with this? I can't get into recovery mode but download mode is showing the product name correctly, unlike with many of the others. Is all hope lost for my NAND / Phone?
velkrosmaak said:
Did you get any further with this? I can't get into recovery mode but download mode is showing the product name correctly, unlike with many of the others. Is all hope lost for my NAND / Phone?
Click to expand...
Click to collapse
Try flashing a recovery with Odin or reflash stock ROM
slaphead20 said:
Try flashing a recovery with Odin or reflash stock ROM
Click to expand...
Click to collapse
Tried that, but Odin fails when it gets to start writing to the NAND. Any other ideas?
velkrosmaak said:
Tried that, but Odin fails when it gets to start writing to the NAND. Any other ideas?
Click to expand...
Click to collapse
Requires a new motherboard .
jje
I've been running wanamlite 14.6 (JB 4.1.2) on my Galaxy S2 i9100 for a few months without problems.
Yesterday, my phone turned off before I'd expect the battery to have run out. I charged it overnight and when I tried to turn it on this morning, it got to my lock screen (with battery indicator at the top) then went black and rebooted. The same thing happened about five times, so I went into the PhilZ recovery and did the Wipe Data/Factory Reset. When I rebooted, it got as far as the SAMSUNG logo with the blue swirl, then hung for a few minutes, before restarting and doing the same again. After a few restarts it gets to the "Samsung Galaxy" welcome screen in a foreign language with "Izberite jezik" written above the drop-down (despite the fact that I chose English as the installation language). This screen appears for a couple of seconds (and does not respond to touch) before rebooting again.
I've tried:
Re-flashing the ROM
Factory Reset (again)
Reinstalling the Siyah Kernel
Could anyone let me know what my next steps should be? This is my first rooted phone, and I haven't got a clue how this happened, or how to proceed...
Thanks in advance.
Flash a stock firmware via odin....
Sent from my GT-I9100 using xda premium
Thanks for the reply.
I've just tried that with Odin 3.07 and and I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5
Odin gets stuck at "SetupConnection.."
I've tried a different cable, and a different USB port to no avail.
Plenty more to try, not just usb port and cable. Click the link in my signature and follow the guide there to troubleshoot.
Sent from a galaxy far, far away
I suggest trying once more flash ROM ，link：http://forum.xda-developers.com/showthread.php?t=2365701
I've tried downloading the firmware from the hotfile links in the post wufang640 linked to. Each time I get to 99% (after quite a while) it says "one second remaining" and then seems to hang. I've tried this in Firefox and IE and I get the same problem. Could this be antivirus related (I'm running Avast)?
I've downloaded the file again, using mega.co.nz, and this time the download completed successfully.
I unzipped the ZIP file and copied the I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 and the SS_DL.dll files to my C:\
I tried to open the ...tar.md5 file in 7zip but I get the following message:
"There is no correct record at the end of archive"
Does this mean the download failed (again)?
I tried to flash the file again on three different computers, with three USB cables (generic, official SGS2 cable, official SGS3 cable). I also tried all combinations of cable and computer and USB port.
Although the phone is detected by Odin - i get the "Added" message - it hangs every time on "SetupConnection.."
With Odin v3.04 I get this message:
<OSM> I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
With Odin v3.07 I get this:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9100XWLSW_I9100XXMS2_I9100XEULS5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
I can still get into the PhilZ recovery tool, and have access to the WanamLite 14.6 rom image on my external SD card. When I try to install this, I still get the foreign language "Samsung Galaxy" welcome message as before. I've tried so many things now, I have no idea if I'm rooted, not rooted, or what's going on.
Any further help, as ever, appreciated!
So I was trying to unroot my phone, to be able to play that new mobile nintendo game of all things and in the process of that got myself stuck in a boot loop, with my wits I tried on my own to get my phone out of the loop. With the TWRP recovery thing in hand I had mangaed to complete wipe my device I think. So now, it will load up to the sprint screen and sit there. I can boot up into TWRP and into the download mode; I don't think I can boot into the stock recovery thing. I tried to use Odin to get a OS onto my device but it said this "<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
And on my phone it had said
SW REV CHECK FAIL DEVICE 3 BINARY 1
Please help me on this, I would rather not just have a soft bricked phone out of my own stupidity.
also not really sure what fastboot is but I don't think I can access it, When i try to hold the power vol up, down. It just turns the phone off (?) and shows the battery charging.
If you can go into recovery mode you just adb push a rom from your pc.
http://highonandroid.com/android-ro...r-android-in-a-bootloop-with-no-os-using-adb/
StillLiam said:
So I was trying to unroot my phone, to be able to play that new mobile nintendo game of all things and in the process of that got myself stuck in a boot loop, with my wits I tried on my own to get my phone out of the loop. With the TWRP recovery thing in hand I had mangaed to complete wipe my device I think. So now, it will load up to the sprint screen and sit there. I can boot up into TWRP and into the download mode; I don't think I can boot into the stock recovery thing. I tried to use Odis to get a OS onto my device but it said this "<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925PVPU1AOCF_G925PSPT1AOCF_G925PVPU1AOCF_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
And on my phone it had said
SW REV CHECK FAIL DEVICE 3 BINARY 1
Please help me on this, I would rather not just have a soft bricked phone out of my own stupidity.
Click to expand...
Click to collapse
When i did this go into twrp and clear delvik. Cache. System
Sd card. And usb check em all coach.
Do it then reboot system and quickly press (power - volume down - and menu key all at once. Download a completely stock rar and install it using odin .
The id005 thing is all good . Dont mess with settings jusy navigate to .tar and flash
ilqs said:
If you can go into recovery mode you just adb push a rom from your pc.
Click to expand...
Click to collapse
As I had said up there I cant boot into recovery mode, whenever I try to my phone just boots into TWRP.
bipolargroup said:
When i did this go into twrp and clear delvik. Cache. System
Sd card. And usb check em all coach.
Do it then reboot system and quickly press (power - volume down - and menu key all at once. Download a completely stock rar and install it using odin .
The id005 thing is all good . Dont mess with settings jusy navigate to .tar and flash
Click to expand...
Click to collapse
I'm not sure I can get a rom in there through Odin, As I had posted up there whenever I tried to do that it gave me that error.
I would really appreciate some help here, been over 12 hours of me trying to fix it on my own. To no avail.
try samsung smart switch. it will download the original firmware that came with the phone and flash it for you..
success123 said:
try samsung smart switch. it will download the original firmware that came with the phone and flash it for you..
Click to expand...
Click to collapse
How do I do that? Does it require my phone to boot?
as digital tumbleweed passes through
StillLiam said:
As I had said up there I cant boot into recovery mode, whenever I try to my phone just boots into TWRP.
Click to expand...
Click to collapse
Did you see the link? If you can access TWRP you are good. Just follow the guide.
StillLiam said:
How do I do that? Does it require my phone to boot?
Click to expand...
Click to collapse
http://samsungsmartswitch.org/ download it from here. put your phone into download mode and follow the steps
download it from here. put your phone into download mode and follow the steps[/QUOTE said:
I tried using Smart Switch and it didn't recognize my phone. I had tried putting my model number and serial number in on it too in the emergency software thing, didn't recognize it.
Click to expand...
Click to collapse
Shooot. Well id do this if you can still get into twrp you really are safe. Click on twrp and i think under Home advamced. Find the fix file permissions. Do it "JUST IN CASE" .i had this happen to me
Then folllow the post here at this link
Click Me Stock Firmware This worked for me when i was Bricked .No os . No nothing . What do you have to lose
ADB Sideload in worst case
Your last but 100% working hope once executed the right way will be the use of ADB Sideload within TWRP which is your obvious recovery. You will need either a SDcard (not for S6 and Edge), a USB with a direct usb cord, or a PC with USB cord to do this. For PC you will need the ADB SideLoad drivers for your phone model to be installed on your PC. Once installed you can connect your phone via USB to your PC and run the ADB SideLoad executable which will run in a CMD window. I don't know the exact commands anymore, but long story short, you want to push the OS install package (Self-installing OS NOT WITH CUSTOM INSTALL MENU) to your phones internal memory which after you'll need to execute by using TWRP. This i have done myself after i hard bricked my S6 edge the first day i got it. I used (by accident) Nand Erase including every other erase to get it back to work which just only put me to more trouble having me to use ADB SideLoad. I hope this bare information helps you out since i can feel the pain you are going through having to know you may have permanently lost your phone lol... Report back if it helped or if you need any more information regarding ADB SideLoad.
- GhostGurio
Try some other original cable. N try flashing via odin.
Also there sometimes u need to flash with pit file. Not sure though.
I had same problem with my s4. Failing at nand write.
In my case cable thing worked.
[GUIDE] A320FL Unlock Solution >> FRP >> Update >> Oreo >> Root + Debloat + Files
Hey Friends,
since i had some trouble with this Device, and even missed the Correct Files, i want to explain a Solution which worked for me.
First Update to the newest FW, download @Samobile or @samfrew
i had taken the DBT from Germany. [A320FLXXS3CRK1]
since you have updated to the Last FW the Device has Binary v.3. that means otherwise,
that you can use this Combination ROM with every other FW which is on Binary v.3
Enter Bootloader Mode and flash the FW with Odin 3.13.1 >> use - BL - AP - CP - HOME_CSC
When finished Booting up the Device, Power-Off, or Press Vol - Home and Power, till Bootloader Mode,
now just press once Vol +)
In Bootloader Mode, Flash now the Combination FW,
Flash the File in - AP -.
Reboot.
the Device Boots up, that usually takes some Time longer, dont worry, just listen to sum muzik..
.. now you are in Factory Mode, you have nothing to do here more, but feel free to look around.
when youre finished watching digits and technician stuff, power off the device and enter Bootloader Mode.
Back in Odin, switch back to the FW you have Downloaded before, flash again but only that files:
BL - AP - Home_CSC NOT CP !
Reboot Device, now you can see its usable again and no nagging setup procedere.
To finish the whole Process you have to power off the Device again and go in Bootloader Mode.
start Odin once again, now you flash all Files >> BL - AP - CP - Home-CSC
Thats it, setup your Device and enjoy.
#####
to Root it, do the following:
Open Odin 3.13.1, start Device in Bootloader Mode, in Odin under Options deactivate Reboot option.
Now Flash TWRP 3.2.3 Recovery in - AP -
Since Device wont reboot by itself, you have to push: Vol - Home Power Buttons till Display go off,
then fast switch your finger from Vol - to Vol + (keep other Buttons pressed)
now you enter TWRP Recovery.
here you swipe to allow changes in filesystem.
now check the Wipe Options and choose on the right side >> Data >> you have to write "yes" and the process starts.
when finished, connect the Device to your Laptop or Desktop,
now look @ your Device, you have to grand access the computer to use Filesystem of the Device.
Now copy the following files to Device:
1. decrypt fs script: no-verity-no-encrypt
2. to clean up a bit: debloat script
3. and of course: superuser
Install all Zip Files with Installer in Recovery. Do it in the Order like its written up there.
You can do the following (seem to TWRP has a Problem to save Settings, to solve, you can change to File Manager in TWRP
and give the Folder TWRP >> chmod 755, the move it from /sdcard to /
REBOOT.
If you like, now activate:
Developer Mode (click in Settings Device Info several times on Build Number to activate DevMode)
OEM Unlock
ADB Debugging
Now you can maybe Install:
BusyBox
FDroid
LuckyPatcher
AdAway ...
xposed Framework:
Installer: download
Framework v.90 beta 3: download
Install Framework zip in Recovery.
I hope i could help someone and appreciated to be part of this forum.
pS: its a pity that there so a little ammount of custom rom for this device out there.
I wish you all a very good start to the New Year!
..and always remember, there's nothing out there what we cannot solve!
Download All Files you need here:
Salut :highfive:
Cannot download files.
Thanks, forens1c!
I was ready to give your solution a try but unfortunately could not download any of the files from MEGA. It asks for a decryption key of which I am unaware.
Could you please help me.
Thank you.
fixed sorry
Zemont said:
Thanks, forens1c!
I was ready to give your solution a try but unfortunately could not download any of the files from MEGA. It asks for a decryption key of which I am unaware.
Could you please help me.
Thank you.
Click to expand...
Click to collapse
now it works sry.
Thank you
Yes, it works!
Thanks.
Another stupid question
Is it relevant that an external SD card is present in the phone during the flashing/rooting procedure?
Should I take it out or leave it?
Thank you.
Great stuff
It works very well. Thanks a lot!
Hello friends,
i have a problem with a Rev 3 firmware. I was not able to flash a combination rom. But this helped me. But anyway im stucked after this. I flash exactly how it is decriped here: BL - AP - Home_CSC NOT CP ! But as soon the device reboots there is written that it was a unallowed try to reset the phone. And i must go through the normal setup procedere.
I have no clue what is wrong or different. I tried at least 5 times with allways the same rresult. If someone has an idea...
Hi, why are there two firmwares ("stock" and "combination") that need to be flashed? Can I use just the stock firmware?
shears said:
Hi, why are there two firmwares ("stock" and "combination") that need to be flashed? Can I use just the stock firmware?
Click to expand...
Click to collapse
Combination file needs to be flashed first because it removes the frp lock.
After that, you flash the stock firmware because the combination firmware is only a repair/test type of rom, with limited functionality.
where can i get combination file for A320FLXXU3CRL1? i have passed the first step successfully. now i need the combination file to flash it in AP.
help pls
Hello forens1c,
thanks for your post, good and comprehensive! Just one thing that you might add for others, which have a sim lock on their devices as me.
It would be good to have a warning "Do not upgrade to the latest firmware unless needed!!", because you cannot downgrade the bootloader anymore.
If you are on U3 odr S3, 2 or 1 cannot be flashed.
Now I know, but it is already to late for me. But maybe for someone else!
All the best from Vienna,
Michael. (abokabadi at gmail com)
a3 2017 frp unlock
Thanks forensic,
at the end your guide wins!!!!
Thanks to Forensic:
https://forum.xda-developers.com/sa...20fl-2017-unlock-solution-frp-update-t3884971
I made here only just a few notes more…...
Enter Bootloader Mode and flash the FW with Odin >> use - BL - AP - CP – HOME_CSC
1)if flash with home_csc failed and you must flash only with Home
maybe you have next ROM release, like me, but not ok for frp unlock(use only HOME_CSC)!!
When finished Booting up the Device, Power-Off, or Press Vol - Home and Power, till Bootloader Mode, now just press once Vol +)
In Bootloader Mode, Flash now the Combination FW,
Flash the File in - AP -.
Reboot.
the Device Boots up, that usually takes some Time longer, dont worry.
.. now you are in Factory Mode(Combination rom), you have nothing to do here.
Back in Odin, switch back to the FW you have Downloaded before, flash again but only that files:
BL - AP - Home_CSC NOT CP !
Reboot Device, now you can see its usable again and no google FRP !!!!!!!.
2)only now you can see in download mode the famous little tiny letters:
FRP modeFF
before I always seen:
FRP MODE: ON
You have to understand that is not a clear procedure, and only at last, …..without hope, you can see the FRP mode: OFF.
To finish the whole Process you have to power off the Device again and go in Bootloader Mode.
start Odin once again, now you flash all Files >> BL - AP - CP - Home-CSC
Thats it, setup your Device and enjoy.
Use only the right file!!!
rom
DBT-A320FLXXS3CRK1-20181123100810
combination
COMBINATION_OXA_FA60_A320FLXXU3ARI1_OXAFAC_CL11575786_QB19737033_REV00_user_mid_noship.tar.md5
U3 with S3 remember
Worked like a Charm. Thanks!
Dont Know Why but didnt Work in Mine Case
1.Flashed Firmware
2.Flashed Combo
3.Flashed Firmware Without CP and HOME CSC
4. FRP Still ON
Member report as working solution but in mine case didnt work, strange
samMobile sucks with there payment... whats wrong with them? i cant get any fw with premium
martin_weber said:
samMobile sucks with there payment... whats wrong with them? i cant get any fw with premium
Click to expand...
Click to collapse
Try Updato.com or shell.boxwares.com
Updato for the newest and for different country / branding,
Boxware has Combination file ,Sboot, ENGboot, stock recovery, etc.
sometimes the DL speed is horrible sometimes you have it in a few minutes, you just have to try
or just google the AP like A320FLXXS3CRK! and you'll find enough sources with good download speed for free
martin_weber said:
samMobile sucks with there payment... whats wrong with them? i cant get any fw with premium
Click to expand...
Click to collapse
Use samfirm or frija for PC. It can download firmware at full speed.
abokabadi said:
Now I know, but it is already to late for me. But maybe for someone else!
Click to expand...
Click to collapse
Did you meanwhile found a combination firmware that works with latest bootloader updates ?
Unfortunately not flashable because bootloader version (3) is older than the one on the device (4). Is there a newer combination firmware?
I have been having no luck with an a320fl. any ideas why this is happening?
Edit: I was using the wrong version of odin. this has been solved.
this is what odin logs during a flash:
odin after flashing a firmware:
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1207)..
<ID:0/008> File analysis..
<ID:0/008> skip file list for home binary
<ID:0/008> sboot.bin.lz4
<ID:0/008> param.bin.lz4
<ID:0/008> cm.bin.lz4
<ID:0/008> boot.img.lz4
<ID:0/008> recovery.img.lz4
<ID:0/008> system.img.lz4
<ID:0/008> userdata.img.lz4
<ID:0/008> modem_debug.bin
<ID:0/008> cache.img.lz4
<ID:0/008> hidden.img.lz4
<ID:0/008> Home Binary Download
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> modem.bin
<ID:0/008> Transmission Complete..
<ID:0/008> Now Writing.. Please wait about 2 minutes
<ID:0/008> Receive Response from boot-loader
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)