Software update confirmation issue - Galaxy S II Q&A, Help & Troubleshooting

Hi,
I´ve just installed stock ICS on my GS2 and whenever I try running the disclaimer for the software update and confirm that I "accept all the terms above" I get a "registering the device" msg for a couple of seconds and then a msg with an exclamation mark saying "software update - processing failed".
Any thoughts?
I have build IML74K, baseband I9100XXKP8, version 4.0.3. Before you ask I am connected to the wifi.
I moved to stock so that I could upgrade to 4.0.4 officially and now I cannot upgrade via phone or KIES (it does detect the phone but it says "your device does not support software upgrading via kies")

ok first u need more space on ur main drive on pc,and wen u faced updating pblm do a factory reset and u moved frm ics to stock and then kies says no update tht means the flashing was not good ,so again flash to stock an c if ur ,pda,modem,csc r all correct...then connect to kies if still facing prblm then install kies drivers in kies for phone....cheeerz

Would you happen to know if there are any 4.0.4 ODIN roms available out there?

Related

[Q] phone is not updating via kies

My Galaxy s 2 has gingerbread 2.3.3 it has
PDA:KE8
PHONE:KE2
CSC:KE2(INU) Indian version
new update has
PDA:KE3
PHONE:KE4
CSC:KE3(INU)
but when download complete via kies , it not abe to update as it says failed to convert in upgrade mode. any one having same issue? any one has here offcial indian version upgrade ? please provide me link for offcial rom for this update.
i have the same problem
first go to the firewall and make kies connect to net
and when you start kies start as administration "right click and run as administration"
or you can update through odin.
nic007rvs said:
My Galaxy s 2 has gingerbread 2.3.3 it has
PDA:KE8
PHONE:KE2
CSC:KE2(INU) Indian version
new update has
PDA:KE3
PHONE:KE4
CSC:KE3(INU)
but when download complete via kies , it not abe to update as it says failed to convert in upgrade mode. any one having same issue? any one has here offcial indian version upgrade ? please provide me link for offcial rom for this update.
Click to expand...
Click to collapse
You need to make sure that usb debugging is off. That being said, Kies sucks big time. If you want to use Kies try the wireless version seems to be a bit better.
There's a update to Kies available. I went to use it last night & a big update came through ?
Phone not syncing to kies in the 1st place!!
My phone doesn't want to connect to kies, it's written connected on the phone but still gives the connecting to device msg on kies on the PC, kept waiting and waiting, but nothing!
I tried with usb debugging method, the storage medium could be read. But no way with Kies!!!
What's wrong?? Please advice me what to do?
Install latest Kies .
jje
As has been suggested try the wireless version also make sure the phone is connected before you open Kies.
Is there some setting in your phone preventing Kies from connecting.
I've only got my S2 a few days so I'm not really into it yet.
I find that Kies is very very slow in connecting.Seems to take forever but it was quite fast over Bluetooth.
I'm also havin same problem but in my case I cant upgrade firmware via Wifi...
Actually I lost my data cable (though ordered a new one today) but yesterdar a new version of kies came and when connected via wifi ... the upgrade firmware window popped up...
but when I tried upgrading it downloaded some components (Preparing firmware ...) and then on my phone I saw tht its already disconnected n after a few sec an error came up (in kies) saying "FirmwareUpdate has stopped working" .... Interestingly kies application keeps running after this error but disconnected... I've google a lot on this but no luck (I thnk most of d ppl pref to upgrade it via usb and not wifi) ...
Also tried reinstalling kies and "factory reset" phone but no avail.
Plz help as i deadly need this upgrade (as my battery's draining very heavily on wifi.. may be this upgrade improves smthng... )

Can't update firmware via kies

Hi,
something went wrong in the update I did to KE7:
after updating, the device showed some console and it was said "update aborted" if i remember right
i then restarted the device and plugged to the computer, and now kies doesn't know what firmware I have.
Is it ok? If not, what should I do?
thanks

[Q] Anyone having problems to conect UK SGS2 Stock Firmware to the new Kies 128

Hi, since this morning after update of Kies i cant conect my SGS2, the windows find it (cause i can transfer files from phone and SD) but Kies said "cant iniate service on the phone", anyone getting this issue after update ? Thx?
Tzi1983 said:
Hi, since this morning after update of Kies i cant conect my SGS2, the windows find it (cause i can transfer files from phone and SD) but Kies said "cant iniate service on the phone", anyone getting this issue after update ? Thx?
Click to expand...
Click to collapse
uninstall kies and reinstall.
Just tried that whit no sucess.
Try to Reboot the phone
Tzi1983 said:
Hi, since this morning after update of Kies i cant conect my SGS2, the windows find it (cause i can transfer files from phone and SD) but Kies said "cant iniate service on the phone", anyone getting this issue after update ? Thx?
Click to expand...
Click to collapse
Had the exact same problem after installing the latest Kies version 2.0.2.
I just disconnected the USB , then did a reboot. It worked.
U could also try reinstalling the drivers. Tools -> Install driver
Since I updated Kies my phone isn't supported for firmware upgrades anymore. I have the DBT german stock Rom whenever I start Kies and connect my phone it's recognized but Kies tells me that it's "not supported for firmware upgrade".
Any ideas or help please?
Sent from my GT-I9100
problem with kies
Had this problem as well,but have now sorted it out..first uninstall kies and and the drivers folder which is separate to keis.. then go to samsung site for sg2, and down load kies from there, when you have reinstalled kies, then plug the usb
lead into your phone and it will reload the drivers, it solved the problem for me. .

Problem with kies and galaxy s3, please help me

There is a message whenever i connect the mobile phone and search for updates by Samsung Kies
the message says (The device does not support receiving software updates)
what is the Problem?
How to solve this problem?
ps. I already install and usinstall kies still the same.(asian stock firmware)
Kies on Windows or Mac Osx????
Ignore the message and wait for an update to be available for your phone .
Do not expect an update for your individual phone to be available if no update has been released for your phone product code etc .
jje

[Q]Help needed regarding updating and usb connection problem

hii...
I am using official android 2.3.6 firmware on my galaxy s2.
whenever I connect my phone via usb, the touch screen doesn't react to the touch.
I am also having a problem when I am trying to update my phone to the
pda:lp7 phone:lpa csc:lp9 version of the firmware.
I am using Kies 2.3.2.12064_9.... when i connect the usb the screen on my phone become unreactive and when i try to update the firmware.. it shows that the updater is not responding...
please help me out...i hve tried it many times but i am nt able to succeed in updating the firmware..
aaravchandra02 said:
hii...
I am using official android 2.3.6 firmware on my galaxy s2.
whenever I connect my phone via usb, the touch screen doesn't react to the touch.
I am also having a problem when I am trying to update my phone to the
pda:lp7 phone:lpa csc:lp9 version of the firmware.
I am using Kies 2.3.2.12064_9.... when i connect the usb the screen on my phone become unreactive and when i try to update the firmware.. it shows that the updater is not responding...
please help me out...i hve tried it many times but i am nt able to succeed in updating the firmware..
Click to expand...
Click to collapse
try reinstallimg kies and drivers

Categories

Resources