Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This Project consists of the build.prop tweaks, init.d tweaks and many other tweaks which are specially made for our Xperia devices after a complete research on various scripts and tweaks.
Almost each and every tweak is explained clearly by Spex in his Project fluid™ so the same explanation is being done here.
You can implement in your ROM build without my permission... just give me proper credits that's enough
Please give your valuable feedback.
Credits:
Spex
Jeeko
zeppelinrox
pikachu01
iONEx
LENAROX
smokin1337
Exit_Only
idcrisis
imbawind
slaid480
smokin1337
[email protected]
darky
devilpera64
lpy
totiadrenalin
lambgx02
doomlord
Hero
If i have forgot someone else please PM me will add your credits
Please rate the thread a 5* if you feel my work is good enough and give me a Thanks
Build.Prop Tweaks
BUILD.PROP
Requirements:
A Rooted android device running Android 2.3 or above
Installation:
Method- I
1. Open "Root Explorer" and click the R/W
2. Go to /system/build.prop
3. Backup yout current build.prop
4. Long-press on Build.Prop and you’ll see a pop up
5. Text Editor
6. Type in those few line of words below into the last line of the text then save
7. reboot and enjoy
Method- II
1. Open "Root Explorer" and click R/W
2. Go to /system and copy build.prop to your sd card
3. Copy build.prop to your pc
4. Move build.prop again to /system and change permission
Tweaks:
Render using GPU and GPU Tweaks:
Code:
[SIZE="2"]
#enable harware egl profile
debug.egl.profiler=1
#16BIT transparency , Smother Scrolling
persist.sys.use_16bpp_alpha=1
#debug.composition.type=gpu
debug.composition.type=c2d
debug.performance.tuning=1
debug.enabletr=true
debug.qctwa.preservebuf=1
dev.pm.dyn_samplingrate=1
video.accelerate.hw=1
ro.vold.umsdirtyratio=20
debug.overlayui.enable=1
debug.egl.hw=1
ro.fb.mode=1
hw3d.force=1
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
ro.sf.compbypass.enable=0
#Enable tile rendering
debug.enabletr=true
persist.sys.composition.type=gpu
#3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0[/SIZE]
Media Quality:
Code:
[SIZE="2"]ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=0
ro.media.codec_priority_for_thumb=so[/SIZE]
Liquid Smooth Ui:
Code:
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
Noise Cancellation:
Code:
#Noise Cancellation Off
htc.audio.alt.enable=0
htc.audio.hac.enable=0
Sensor Sleep:
Code:
# For sensor sleep control
ro.ril.sensor.sleep.control=1
Unlock fps limit:
Code:
debug.egl.swapinterval=0
Qualcomm tweaks:
Code:
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
Screen Glitches fix:
Code:
debug.gr.numframebuffers=3
Disable debugging notify icon on statusbar:
Code:
persist.adb.notify=0
EHRPD Support :
Code:
ro.config.ehrpd=true
Disable boot animation for faster boot :
Code:
debug.sf.nobootanimation=1
3G network for speeding up :
Code:
ro.ril.set.mtu1472=1
Disable Logers (safe battery + performance gain)
Code:
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
Better scrolling responsiveness
Code:
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Touch tuning :
Code:
### Touch tuning ###
touch.presure.scale=0.001
System prop for tethering denied:
Code:
ro.tether.denied=false
Enable Hardware 3D :
Code:
hw3d.force=1
Phone will not wake up from hitting the volume rocker:
Code:
ro.config.hwfeature_wakeupkey=0
Unlock phone by menu key:
Code:
ro.config.hw_menu_unlockscreen=false
Save power while phone is in sleep mode:
Code:
ro.ril.disable.power.collapse=1
Better scrolling:
Code:
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
Support for ipv4 and ipv6.:
Code:
persist.telephony.support.ipv4=1
persist.telephony.support.ipv6=1
Better battery life:
Code:
pm.sleep_mode=1
usb_wakeup=enable
proximity_incall=enable
power_supply.wakeup=enable
ro.config.hw_power_saving=1
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
persist.sys.use_dithering=0
#improve battery under no signal -- need test
ro.mot.eri.losalert.delay=1000
Bravia Engine:
Code:
ro.service.swiqi.supported=true
persist.service.swiqi.enable=1
Xloud Engine:
Code:
ro.semc.sound_effects_enabled=true
ro.semc.xloud.supported=true
persist.service.xloud.enable=1
media.xloud.enable=1
media.xloud.supported=true
More precisely incall volume control:
Code:
ro.config.vc_call_vol_steps=15
Increase overall scrool speed and enable rotation to 270 degree:
Code:
windowsmgr.max_events_per_sec=170
windowsmgr.support_rotation_270=true
Better signal reception:
Code:
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
Enable 16 BIT:
Code:
debug.fb.rgb565=1
VM tweak:
Code:
ro.vold.umsdirtyratio=20
Better in call voice quality:
Code:
ro.ril.enable.amr.wideband
Signal Tweaks:
Code:
persist.cust.tel.eons=1
ro.ril.gprsclass=10
ro.ril.hsdpa.category=8
ro.ril.hsupa.category=6
ro.ril.hsxpa=1
net speed tweaks:
Code:
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
Wireless Tweaks:
Code:
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
Google DNS Tweak -- fastest DNS service:
Code:
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.dns1=8.8.8.8
net.dns2=8.8.4.4
Website Bypass:
Code:
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
DalvikVM:
Code:
dalvik.gc.type=precise
dalvik.vm.dexopt-data-only=1
#Enables register map for tracking objects to garbage collect. Might give a little more RAM at the cost of a few CPU cycles.
dalvik.vm.dexopt-flags=m=v,o=y
dalvik.vm.jniopts=forcecopy
dalvik.vm.lockprof.threshold=500
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.verify-bytecode=false
Launcher tweaks: Testers needed
Code:
# Keep launcher in memory
ro.HOME_APP_ADJ=1
# Won't let memory managers to kill Launcher
ro.PERCEPTIBLE_APP_ADJ=2
#ro.HOME_APP_MEM=2048
Kernel Tweaks: (Should speed things up a bit)
Code:
# Disable error checking
ro.kernel.checkjni=0
ro.kernel.android.checkjni=0
Allow purging of assets (System can free more Ram when needed):
Code:
persist.sys.purgeable_assets=1
Disabling Strict mode:
Code:
# Disable strict mode checking
persist.android.strictmode=0
Disable WiFi calling for EU models:
Code:
ro.ril.enable.ganlite=0
Decrease dial out delay:
Code:
ro.telephony.call_ring.delay=0
ring.delay=0
Decrease time for screen off/on during call:
Code:
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
Makes streaming videos stream faster:
Code:
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
For quick boot mode:
Code:
# persist.sys.shutdown.mode=hibernate
ro.config.hw_quickpoweron=true
Hide debuging icon from taskbar:
Code:
persist.adb.notify=0
persist.service.adb.enable=1
For the default value of aGPS:
Code:
ro.ril.def.agps.mode=2
ro.ril.def.agps.feature=1
Enable egl profiler - enable harware egl profile:
Code:
debug.egl.profiler=1
enable/disable data in roaming:
Code:
#ro.com.android.dataroaming=true
ro.com.android.dataroaming=false
Script Tweaks
Special Thanks to @Jeeko bro for the PurePerformances™X | Golden Edition
One of the best scripts ever made on XDA
SCRIPTS
Requirements:
rooted phone
android 2.3+ ( 4.0 recomended)
kernel/rom with init.d support
5mb free in system
busybox
NANDROID BACKUP!! thanks @shprakash bro for reminding
FEATURES:
Android performances improved at 360°
- Radically improved management ram on android (Lags...adios!)
- Script lightweight and revised to be adapted to this engine
- Improves a lot the graphics: of course Pure Graphic™HD, Pure Dithering Plus™ and... AOSPA 3.60 system tweaks
- Scan multimedia time drastically reduced
- Network Improvements, 3G experience even in 2G modality
- All SQlite database optimized
- Enable hardware features turned off by default for a better experience on entry level devices
- Greatly increases the score AnTuTu: Try it to believe it!!
- Reduces the startup time of Android
- A version for stock rom and one for CM, to squeeze any roms!
- Allows you to play ported games without lags
- Cleans the system every 24 hours, thecache every week and the Dalvik every month (cronos easter egg)
- Automatically Zipalign on each boot (sensitive to the user)
Battery:
Drastically decreased the drainage of battery
- Check the activities that consume too much battery stop them with PureWakelocks™
- When the phone is charging reduces system services for faster charging
- The battery is calibrated on every boot
- Disable animation of the system when the battery is nearly exhausted
- Improvements in build.prop as regards the part of consumption
Graphics, Screen, Images
Enables a non-aggressive dithering to save CPU
- When you lock the device, the engine makes sure that the GPU is turned off
- Enables deep sleepalso in the bugged rom
- Parts of bravia engine
- parts of CrossBreeder (credits to dev)
- parts of Adrenaline Engine (credits to dev)
- PureGraphics HD
- V6 supercharger
- Generates video entropy (like seeder)
CPU, Governors, I/O Schedulers
Slightly improves the scaling of the frequencies (for better results you need a good kernel)
- Lightens the load on the CPU switching the workload to GPU rendering
- Enable the swap partition in Android (experimental)
Don't have init.d tweaks in your ROM??
Well you can integrate them in your ROM by just clicking on this link : Integrate init.d tweaks!!
Thanks to @sidharth.gtm for providing the link and Ryuinferno for the init.d thread please click a THANKS for the dev!
DOWNLOADS:
Install the stock version on your stock firmware or stock based ROM of your phone....
Download: PurePerformances™X
Uninstall: PurePerformances™X-Uninstaller
if your device don't have gingerbread or ICS officially, install the CM version (This also applies to the AOSP)
For CMx.x, Lewa Os, MIUI, etc Download:
PurePerformances™X_CM_Others.1.4.zip
Pleask click a thanks for @Jeeko for this awesome scripts
Thread Open for commenting guys
BANNERS:
Code:
http://img855.imageshack.us/img855/3836/9h4o.png
Code:
http://img694.imageshack.us/img694/7223/1lbq.png
The thread is now open for commenting guys! Thanks @Spex for helping me always
wow, fantastic. will try now
Nice work aneel... Keep up the good work
Sent from my ST15i using xda app-developers app
Help wanted
Hey friend I am using [ROM][CM10.1 + SONY 4.2.2][ALL MDPI] JellyVanilla EX 4.1.Can I apply it to my rom?If yes,How do i do so.Can you please simplify the installation method you mentioned?Do i need to flash the tweak zip file i downloaded for CM.X.X. you attached.
Please help.I am not an expert.
Thanking you in advance
Regards,
Siddhesh:cyclops:
shprakash said:
Nice work aneel... Keep up the good work
Sent from my ST15i using xda app-developers app
Click to expand...
Click to collapse
Thanks alot bro.. :good:
Siddhesh Sapre said:
Hey friend I am using [ROM][CM10.1 + SONY 4.2.2][ALL MDPI] JellyVanilla EX 4.1.Can I apply it to my rom?If yes,How do i do so.Can you please simplify the installation method you mentioned?Do i need to flash the tweak zip file i downloaded for CM.X.X. you attached.
Please help.I am not an expert.
Thanking you in advance
Regards,
Siddhesh:cyclops:
Click to expand...
Click to collapse
since you are on CM 10.1.. download the zip for CM x.x and install via cwm bro thats it... but make sure that your ROM support init.d tweaks
Thanks for the work bro!
Sent from my WT19i using xda premium
good work dude . does this Update for Spex Thread or Completely Different ?
Xperia~Man said:
good work dude . does this Update for Spex Thread or Completely Different ?
Click to expand...
Click to collapse
Thanks man! did i say any where that it is a update of spex's thread?? lol just the thread "looks" match.. other than that its entirely different... from his "scripts" and yeah build prop might match because i've gathered almost 20-25 types of build.prop tweaks and posted the best out of the best tweaks for our devices...
Aneel said:
Thanks man! did i say any where that it is a update of spex's thread?? lol just the thread "looks" match.. other than that its entirely different... from his "scripts" and yeah build prop might match because i've gathered almost 20-25 types of build.prop tweaks and posted the best out of the best tweaks for our devices...
Click to expand...
Click to collapse
hehe . no problem man . as you said threads were similar
But Yeah keep good work :good:
Bro... Awesome work :good: i tested on CM10.1 legacy xperia and got the antutu benchmarks as 6895 on first boot
Work the tweak "ro.HOME_APP_ADJ=1" in ICS really?
Sent from my WT19i using xda premium
That is the reason why i added testers needed bro
Sent from my Xperia Z using xda app-developers app
this mod is awensome, but it have one thing that i don`t like - it disable crt off mod in cm 10.1 :/
I just lost my framework's JB animations after flashing these scripts
See the features list bro... i think animations get disabled for better performance
However try this also... first install the scripts and once they are installed .. reboot the device and clear cache and dalvik cache and flash your framework-res.apk and see
Sent from my Xperia Z using xda app-developers app
Aneel said:
See the features list bro... i think animations get disabled for better performance
However try this also... first install the scripts and once they are installed .. reboot the device and clear cache and dalvik cache and flash your framework-res.apk and see
Sent from my Xperia Z using xda app-developers app
Click to expand...
Click to collapse
i tried to flash animations after scripts, but no luck same thing lost my lovely animations
gmp009 said:
i tried to flash animations after scripts, but no luck same thing lost my lovely animations
Click to expand...
Click to collapse
bro it's mentioned in the features that animations would be disabled if you have a low battery and i'll probably edit that in few hours.. and give one more add-on
Hi guys this Guide will show you how to make your own build of your system
You Need:
1-Root
2-Root explorer
Important:
Changing your build may cause to get a continues boot so if that happen to you reflash the zip
This zip is a flashable zip that made for xperia p users to restore there original build don't use it on other Model
Click here to download
Things you can change
ro.build.version.release=change the current Build version
ro.product.model=change your phone model
ro.product.brand=change your brand
Mods you can add:
Those info are taking from other ROM BUILD like DARK ROM or MOON ROM or NEUTRON v 1.9
Code:
#Graphics acceleration tweaks
debug.egl.hw=1
debug.compbypass.enable=1
dev.pm.dyn_samplingrate=1
debug.mdpcomp.maxlayer=3
debug.mdpcomp.logs=0
Code:
#Disable USB Debugging PopUp
persist.adb.notify=0
Code:
#Allow to free more ram
persist.sys.purgeable_assets=1
Code:
#Better Touchscreen Responsiveness
touch.pressure.scale=0.7
touch.size.bias=67.00
touch.size.scale=18.22
Code:
#Smoother video watching
video.accelerate.hw=1
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=false
media.stagefright.enable-http=true
If you want more Get Thise Rom Build and Read
LeoLawliet presents..
- PenberRom5 -
Fine tuned and tweaked for better battery life, performance, smoothness, and responsiveness
This ROM is mainly based on PenberRom2, which I started working on at CM Forums.
To be honest the main difference between the two is PenberRom2 was based on PACman ICS 4.0.4, while PenberRom5 is based on PACman JB 4.3.
Other than that, the whole idea behind both ROMs is the same, a custom ROM based on my preference and what enhancements I use.
It's already tweaked and fine tuned, I saved you all the trouble of having to do it yourselves
Here's a list of what has been added:
Smart Launcher included
Replaced DSP Manager with ViPER4Android FX
Supercharged services.jar (launcher stays in memory + better multitasking)
boost in performance
swap2cache terminal script creates a 64mb swapfile in /cache with swappiness set to 40
swap2data terminal script creates a 128mb swapfile in /data with swappiness set to 40
increased responsiveness
better battery life
faster boot
zipalign apk's on boot
defrag databases on boot
entropy tweak
I/O scheduler tweaks
sleeper tweaks
hardware rendering tweaks
improved sdcard read/write speed
disables logger
disables journalism
disables vsync
ADJ tweaks
vm tweaks
ram tweaks
graphics rendering tweaks
video/music streaming tweaks
various useful terminal scripts (I'll mark those down)
custom bootanimation + UI sounds
increased jpeg + video recording quality
3D performance enhancement tweaks
call tweaks
scripts to clean database & zipalign apps
cpuramcheck script to monitor CPU/RAM usage in realtime using the terminal emulator
Stabilized FPS through a build.prop tweak (kinda risky, comment out if you have graphic glitches. Thanks LENAROX!!)
Click to expand...
Click to collapse
As usual, I will leave a disclaimer. I will NOT be held responsible if this causes any damage to your device,
you are responsible for making a nandroid backup in the case that a bootloop occurs.
Credit goes out to these guys
AntonX - for CM10.2 ROM
mateo1111 - for PACrom JB 4.3 ROM
twinnfamous - for porting PACrom JB 4.3 with everything fully working, it's the base ROM I'm using
Pizza_Dox - for gm & hc scripts, 02SDCardAccel, 97ramscript, 20vmlt, 82Sleepers, RNGD, Cache_Cleaner
ViPER520 and zhuhang - for ViPER4Android FX
Chainfire - for some scripts. 01-GPU_touchrender, libncurses.so
ImbaWind - for Adrenaline Boost script
Spex - for some build.prop edits and some code from his startup scripts, I started out with his collection of tweaks
zeppelinrox - for services.jar patcher & terminal scripts. [vac, zepalign]
LENAROX - you made the cpuramcheck script possible, and you are also responsible for 20vmlt. Thanks
The rest I honestly don't remember but if you feel that you deserve credit, message me and I will give you proper credit where it should be given.
kuma82 - for the 90kuma script & WiFi fix (only needed in older builds, twinnfamous fixed the bug)
artit - for AROMA Installer base setup
Click to expand...
Click to collapse
And once again because I can't tell you how annoying it is for someone to screw up their own device for not following instructions carefully and then blame someone else..
I will NOT be held responsible if this causes any damage to your device, you are responsible for making a nandroid backup in the case that a bootloop occurs.
Enjoy
Downloads
HOW TO INSTALL:
Code:
* Download the Rom and Gapps
* Reboot to Recovery
* Wipe data/factory reset
* Wipe system
* Flash the ROM and then Gapps
* Reboot your phone
* Enjoy
____________________________________________________________________________________________
HOW TO UPDATE:
Code:
* Download the latest version
* Reboot to Recovery
* Wipe dalvik cache and cache
* Wipe system
* Flash the ROM and then Gapps
* Reboot your phone
* And enjoy the latest version of PAC
____________________________________________________________________________________________
DOWNLOADS
============================================================
ROM
============================================================
Code:
[B][COLOR="Green"]11/21/2013[/COLOR][/B]
[B]Mirror #1[/B] [URL="http://d-h.st/9Rj"]Dev-Host[/URL] (Please use this mirror)
[B][COLOR="Green"]11/14/2013[/COLOR][/B]
[B]Mirror #1[/B] [URL="http://d-h.st/7z4"]Dev-Host[/URL] (Please use this mirror)
[B][COLOR="Green"]10/31/2013[/COLOR][/B]
[B]Mirror #1[/B]: [URL="http://d-h.st/6x1"]Dev-Host[/URL] (please use this mirror)
[B][COLOR="Green"]10/19/2013[/COLOR][/B]
[B]Mirror #1[/B]: [url="https://app.box.com/s/061mnjqso4p3g69ztj45"]Box[/url] (please use this mirror)
[B]Mirror #2[/B]: [URL="https://db.tt/DlWpG2oo"]Dropbox[/URL] (thanks DjSidEShoW)
============================================================
Google Apps & Add-ons
============================================================
Code:
[B]Slim AROMA Gapps[/B]: Get it [URL="http://www.slimroms.net/index.php/downloads/dlsearch/viewdownload/383-addons/6370-slim-aroma-selectable-gapps-4-3-build-2"]here.[/URL]
Install what you want, you have that option now
[B]UltraSlim Gapps[/B]: [URL="http://d-h.st/users/ronin79/?fld_id=27074#files"]here[/URL].
Only 11mb, no extra clutter
[B]IRS Starter Pack[/B]: for ViPER4Android FX. Get the latest files [URL="http://forum.xda-developers.com/showthread.php?t=2216193"]here[/URL].
(optional)
[B]Google Home Add-on[/B]: Get it [URL="http://d-h.st/TJ8"]here[/URL].
I recommend you install Gapps first.
Click to expand...
Click to collapse
Misc./Discontinued
LeoLawliet presents..
- PenberEngine -
Tweaks for everyday use
These tweaks are already included in PenberRom5,
This is just for anyone who wishes to have the additional tweaks for a different device.
- Download -
10/06/2013
- build.prop tweaks -
Also included already, use on whatever ROM you like
Code:
### LeoLawliet's new tweaks 9/15/2013 ###
# Misc Tweaks
debug.gr.swapinterval=0
debug.performance.tuning=1
dev.pm.dyn_samplingrate=1
persist.adb.notify=0
persist.service.adb.enable=1
persist.sys.use_dithering=1
persist.sys.purgeable_assets=1
qemu.hw.mainkeys=0
ro.min_pointer_dur=1
ro.sec.proximity.delay=0
sys.mem.max_hidden_apps=15
# Battery Tweaks
pm.sleep_mode=1
ro.ril.disable.power.collapse=1
# Unlocks Screen using Menu Button
ro.config.hw_menu_unlockscreen=true
# Kernel Tweaks
ro.kernel.checkjni=0
# Ram Tweaks
persist.sys.purgeable_assets=1
# Kills Loging
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
profiler.force_disable_ulog=1
profiler.force_disable_err_rpt=1
# Media Streaming Optimizations
media.stagefright.enable-player=true
media.stagefright.enable-meta=true
media.stagefright.enable-scan=true
media.stagefright.enable-http=true
media.stagefright.enable-aac=true
media.stagefright.enable-qcp=true
media.stagefright.enable-record=true
# Camera & Media Tweaks
ro.media.enc.jpeg.quality=100
ro.media.dec.jpeg.memcap=8000000
ro.media.dec.jpeg.memcap=20000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=75
ro.media.enc.jpeg.quality=100
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
ro.media.cam.preview.fps=25
ro.media.codec_priority_for_thumb=so
# CM9 Tweaks
hwui.disable_vsync=true
hwui.render_dirty_regions=false
# Voice Optimization
ro.ril.enable.amr.wideband
# Better Telephony Settings
ro.config.vc_call_vol_steps=15
ro.config.vc_call_steps=20
ro.telephony.call_ring.delay=0
ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
ro.mot.buttonlight.timeout=0
# Google DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
# TCP Tweaks (might break WiFi)
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspda=4096,87380,256960,4096,16 384,256960
net.tcp.buffersize.hspa=4096,87380,256960,4096,163 84,256960
# Wireless Conection Tweaks (might break WiFi)
net.ipv4.ip_no_pmtu_disc=0
net.ipv4.route.flush=1
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fack=1
net.ipv4.tcp_mem=187000 187000 187000
net.ipv4.tcp_moderate_rcvbuf=1
net.ipv4.tcp_no_metrics_save=1
net.ipv4.tcp_rfc1337=1
net.ipv4.tcp_rmem=4096 39000 187000
net.ipv4.tcp_sack=1
net.ipv4.tcp_timestamps=1
net.ipv4.tcp_window_scaling=1
net.ipv4.tcp_wmem=4096 39000 187000
# 3d performance
persist.android.strictmode=0
ro.min_pointer_dur=1
ro.secure=0
# 16BIT Support
debug.fb.rgb565=1
# 16BIT Transparency
persist.sys.use_16bpp_alpha=1
# Graphic Tweaks
ro.product.gpu.driver=1
debug.gr.swapinterval=0
# Better scrolling responsiveness
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
# Better Touch Responsiveness
touch.presure.scale=0.001
# Dalvik Tweaks
dalvik.vm.heapstartsize=8m
dalvik.vm.heapgrowthlimit=64m
dalvik.vm.heapsize=256m
dalvik.vm.dexopt-flags=m=y,v=n,o=n
dalvik.vm.stack-trace-file=/data/anr/traces.txt
dalvik.vm.lockprof.threshold=500
dalvik.vm.execution-mode=int:jit
dalvik.vm.jmiopts=forcecopy
dalvik.vm.dexopt-data-only=1
# Enable Qualcomm tile rendering (Hardware Rendering)
debug.enabletr=1
persist.sys.composition.type=gpu
# enable harware egl profile
debug.egl.profiler=1
# FPs Booster
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Graphic Optimization
debug.gr.numframebuffers=3
ro.min_pointer_dur=1
# Hardware 2D & 3D Rendering
hw3d.force=1
hw2d.force=1
# Nitro Lagg Nullifier
ENFORCE_PROCESS_LIMIT=false
MAX_SERVICE_INACTIVITY=false
MIN_HIDDEN_APPS=false
MAX_HIDDEN_APPS=false
CONTENT_APP_IDLE_OFFSET=false
EMPTY_APP_IDLE_OFFSET=false
MAX_ACTIVITIES=false
ACTIVITY_INACTIVE_RESET_TIME=false
MAX_RECENT_TASKS=false
MIN_RECENT_TASKS=false
APP_SWITCH_DELAY_TIME=false
MAX_PROCESSES=false
PROC_START_TIMEOUT=false
CPU_MIN_CHECK_DURATION=false
GC_TIMEOUT=false
SERVICE_TIMEOUT=false
MIN_CRASH_INTERVAL=false
# Pro-Tuned ADJ 1.2 by LENAROX.
ro.FOREGROUND_APP_ADJ=0
ro.VISIBLE_APP_ADJ=4
ro.PERCEPTIBLE_APP_ADJ=3
ro.HEAVY_WEIGHT_APP_ADJ=2
ro.SECONDARY_SERVER_ADJ=1
ro.BACKUP_APP_ADJ=5
ro.HOME_APP_ADJ=6
ro.HIDDEN_APP_MIN_ADJ=7
ro.EMPTY_APP_ADJ=15
#Ultimate Assassin Mode!
#ro.SECONDARY_SERVER_ADJ=15
#ro.HIDDEN_APP_MIN_ADJ=3
# Qualcomm Display Settings (Qualcomm devices ONLY!!)
com.qc.hardware=1
debug.qc.hardware=true
debug.qctwa.preservebuf=1
debug.qctwa.statusbar=1
# Rapid Boot Technology 1.1 (Reduces bootup time)
persist.sys.shutdown.mode=hibernate
ro.config.hw_fast_dormancy=1
ro.config.hw_quickpoweron=true
# Rendering Tweaks
debug.composition.type=c2d
debug.egl.hw=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
debug.performance.tuning=1
debug.sf.hw=1
dev.pm.dyn_samplingrate=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
video.accelerate.hw=1
# Sensor Sleep Control
ro.ril.sensor.sleep.control=1
# Smoothens UI
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
### End of LeoLawliet's new tweaks 9/15/2013 ###
any screenshots?
noob.gamer said:
any screenshots?
Click to expand...
Click to collapse
It's basically PACrom JB 4.2.2 but heavily modified. It looks exactly the same.
I still need to add the finishing touches before anything. I should have it done and uploaded within the next few hours.
Edit: Uploaded and posted, check the 2nd post.
Edit2: Don't download yet, it bootloops and I know why. I'll fix it right now.
Everything should be fixed now
New one still bootloops
Sent from my LG-P769 using xda app-developers app
I know, I'm working on it x__x
This is an older one I made but I didn't have time to test it.
http://d-h.st/9ju
Still needs work and my WiFi sucks, can't even upload anything :/
Sent from my LG-P769 running PACrom JB 4.3 using Tapatalk 2
Why did You upload this without testing? BTW, Your engine is preety nice, it really boost my phone, can i add some of tweaks to my rom? :3
unn.
Unn113 said:
Why did You upload this without testing? BTW, Your engine is preety nice, it really boost my phone, can i add some of tweaks to my rom? :3
unn.
Click to expand...
Click to collapse
I did test it, I guess it's just having issues with the latest CM10.1 lol
My apologies guys, I'm gonna make this right. And glad you like the engine tweaks, yes you may use them but please link back to the engine post and give credit
These tweaks work 100% flawless on PenberRom5, I may just release that instead.
Sent from my LG-P769 running PACrom JB 4.3 using Tapatalk 2
Still working on it, I'll give you guys an update when it's working. I'm sorry, the new tweaks aren't doing so well. I might as well revert to the old ones that did work for now.
Edit: Annnndddd it works!!
Uploading at the moment.
leolawliet said:
Still working on it, I'll give you guys an update when it's working. I'm sorry, the new tweaks aren't doing so well. I might as well revert to the old ones that did work for now.
Edit: Annnndddd it works!!
Uploading at the moment.
Click to expand...
Click to collapse
Tweaks work great. I added the build prop ones first and notice improvement in antutu. So I went ahead and flashed pender engine tweaks and that made it even better. I dont use no-frills CPU tuner because the port im running has performance app built in settings with overclocking options. This is great my pac4.3 port is running greater than before. And the sounds u added to the touch is cool. I havent tried the launcher yet. Thank you for these tweaks.
My last Benchmark score
By the way, ROM released
Sent from my LG-P769 running PenberRom5 using Tapatalk 2
Disabled logger, disables journalism? What are these?
Sent from my LG-P769 using Tapatalk 4
Disabled logger - You can't do a logcat. Disabled journalism - better ram management.
Sent from my p760 powered by CarbonROM 4.3.
Unn113 said:
Disabled logger - You can't do a logcat. Disabled journalism - better ram management.
Sent from my p760 powered by CarbonROM 4.3.
Click to expand...
Click to collapse
Exactly and both tweaks boost performance, I also recommend deleting the selinux init.d script for further increase in performance.
Looks like a good ROM with all those features... have you encountered any bugs or problems so far?
Also, your download link gives an error "The user hosting this content is out of bandwidth."
optimusl9 said:
Looks like a good ROM with all those features... have you encountered any bugs or problems so far?
Also, your download link gives an error "The user hosting this content is out of bandwidth."
Click to expand...
Click to collapse
That means my bandwidth limit was exceeded, too many downloads. I'm working on a new build probably tonight at work. Much better optimizations, this is my last benchmark
Sent from my LG Optimus L9 running PenberRom5 using Tapatalk 2
leolawliet said:
That means my bandwidth limit was exceeded, too many downloads. I'm working on a new build probably tonight at work. Much better optimizations, this is my last benchmark
Sent from my LG Optimus L9 running PenberRom5 using Tapatalk 2
Click to expand...
Click to collapse
Good to hear. Please excuse me while I try the painful, stabbing myself with a knife process of unlocking the bootloader on P769. Be right back... by tomorrow... I hope.
This Thread is closed and no longer being updated
I've Started New Project (BT4A)
Check it out LINK [Updated]
Just For Rooted DevicesVPN and Security entrance FC bug , fixed
The best build.prop tweak for Grand Prime 5.0.2 & 4.4.4
but Works for any smart phone running 4.3 & 4.4.2 & 4.4.4 & 5.0.1 & 5.0.2 & 5.1.1 & 6.0.1
Tested Devices :
SM-G530H/DV
SM-G530H/DS
SM-G530FZ
SM-G530BT
SM-G530F
SM-G530M
SM-G360
SM-G531 (all variants)
SM-S920L
S7582 S Dous 2
LG G2 (d801)
SM-G5308W
Idol 3
Redmi 3/Pro/S/S Prime /X
Almost all of devices:good:
Waiting for feedbacks ...
Before doing anything plz backup your main build.prop located in root/system/build.prop and save it on the PC
Here is some Enhancements:
- Supreme Battery life (even more in idle)
- Better internet browsing & download speed (NEW2016)
- Smoother experience
- Google DNS
- Better Microphone
- More Ram
- Better signal reception
- Wireless Tweaks
- Smoother video streaming and tweak media
- Faster Boot-Animation FPS (Just compare)
- Better call voice quality
- Game tweaks
- Qualcomm Tweaks
For Grand Prime:
1. Find this line"ro.pip.gated=0" at the end of build.prop as U can see its the last line
2. Copy all of these lines just below the "ro.pip.gated=0"
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
For other phones :
1. Find last line of build.prop
2. Copy all of these lines just below the last line
3. Save the changes and set the permissions to rw-r-r
4. Reboot and enjoy
#ADD
mot.proximity.delay=25
pm.sleep_mode=1
ro.config.nocheckin=1
ro.lge.proximity.delay=25
# Better Responsiveness & Speed
windowsmgr.max_events_per_sec=90
ro.max.fling_velocity=15000
ro.min.fling_velocity=8000
touch.pressure.scale=0.1
# More RAM
persist.sys.purgeable_assets=1
persist.service.pcsync.enable=0
persist.service.lgospd.enable=0
#Hardware Power Saving
ro.config.hw_power_saving=true
#Disable Miscellaneous Android Logging Stuff
debugtool.anrhistory=0
profiler.debugmonitor=false
profiler.launch=false
profiler.hung.dumpdobugreport=false
#Enable ADB Debugging By Default & Disable USB Debugging Popup
persist.adb.notify=0
persist.service.adb.enable=1
persist.service.debuggable=1
persist.sys.usb.config=mtp,adb
#Disable Logers
ro.config.htc.nocheckin=1
ro.config.nocheckin=1
#Disable Kernel Error Checking
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
# Other Tweaks:
ro.config.combined_signal=true
#DHA tunning
ro.config.dha_tunnable=1
#Disable Strict Mode Checking
persist.android.strictmode=0
#Better signal reception
persist.cust.tel.eons=1
ro.config.hw_fast_dormancy=1
#For Sensor Sleep Control
ro.ril.sensor.sleep.control=1
#Faster Boot-Animation FPS
boot.fps=20
#Enable Quick Power-On Mode To Reduce Boot-Time
ro.config.hw_quickpoweron=true
persist.sys.shutdown.mode=hibernate
#Disable Scrolling Cache For Faster Scrolling
persist.sys.scrollingcache=3
ro.securestorage.knox=false
#security.mdpp=none
#security.mdpp.result=none
wifi.supplicant_scan_interval=220
# Video Acceleration Enabled And HW debugging
debug.performance.tuning=1
# GOOGLE DNS
net.dns1=8.8.8.8
net.dns2=8.8.4.4
net.rmnet0.dns1=8.8.8.8
net.rmnet0.dns2=8.8.4.4
net.ppp0.dns1=8.8.8.8
net.ppp0.dns2=8.8.4.4
net.wlan0.dns1=8.8.8.8
net.wlan0.dns2=8.8.4.4
net.eth0.dns1=8.8.8.8
net.eth0.dns2=8.8.4.4
net.gprs.dns1=8.8.8.8
net.gprs.dns2=8.8.4.4
# Dialing Tweaks
ro.telephony.call_ring.delay=0
ro.lge.proximity.delay=25
mot.proximity.delay=25
# Smoother video streaming and tweak media
media.stagefright.enable-meta=true
media.stagefright.enable-record=false
# Increase camera's photo and video recording quality
ro.media.dec.aud.wma.enabled=1
ro.media.dec.vid.wmv.enabled=1
# Support For IPV4 and IPV6
persist.telephony.support.ipv6=1
persist.telephony.support.ipv4=1
# Better image quality, lower performance.
persist.sys.use_dithering=1
# Better call voice quality.
ro.ril.enable.amr.wideband=1
debug.enabletr=true
debug.overlayui.enable=1
debug.qctwa.preservebuf=1
hw3d.force=1
ro.config.disable.hw_accel=false
ro.fb.mode=1
ro.sf.compbypass.enable=0
ro.vold.umsdirtyratio=20
persist.sys.composition.type=c2d
persist.sys.ui.hw=1
# System prop to select MPQAudioPlayer by default on mpq8064
mpq.audio.decode=true
# Better Scrolling responsiveness and speed
ro.min_pointer_dur=1
# Miscellaneous Tweaks for performance
ro.config.hw_menu_unlockscreen=false
ro.mot.eri.losalert.delay=1000
ro.telephony.sms_segment_size=160
# Hardware 2D & 3D Rendering
hw2d.force=1
# 3d performance
ro.secure=0
# Other Tweaks
ro.config.hw_new_wifitopdp=1
vm.dirty_ratio=90
vm.dirty_background_ratio=70
vm.vfs_cache_pressure=10
vm.min_free_kbytes=4096
#Minimum brightness of your screen
ro.lcd_min_brightness=1
# System Tweaks
ro.HOME_APP_ADJ=1
# Qualcomm Tweaks
debug.qctwa.statusbar=1
debug.qc.hardware=true
com.qc.hardware=true
debug.qctwa.preservebuf=1
# Disables data sent and logging
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# DalvikVM
dalvik.vm.verify-bytecode=false
dalvik.vm.execution-mode=int:fast
dalvik.vm.checkjni=false
dalvik.vm.dexopt-data-only=1
dalvik.vm.lockprof.threshold=250
dalvik.vm.dexopt-flags=m=y
dalvik.vm.jmiopts=forcecopy
# Performance
debug.kill_allocating_task=0
force_hw_ui=true
ro.debuggable=1
# Saves some battery without reducing performances
power.saving.mode=1
# Battery save
ro.ril.disable.power.collapse=0
ro.ril.power_collapse=1
power_supply.wakeup=enable
profiler.force_disable_ulog=true
profiler.force_disable_err_rpt=true
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
# Increase some Performance
ro.product.gpu.driver=1
ENFORCE_PROCESS_LIMIT=false
ro.wmt.blcr.enable=0
# Bass audio props for Lolipop
tunnel.decode=false
persist.sys.media.use-awesome=1
sys.keep_app_1=com.bel.android.dspmanager
ro.audio.samplerate=48000
ro.audio.pcm.samplerate=48000
af.resample=52000
# Game tweaks
persist.sys.NV_FPSLIMIT=60
persist.sys.NV_POWERMODE=1
persist.sys.NV_PROFVER=15
persist.sys.NV_STEREOCTRL=0
persist.sys.NV_STEREOSEPCHG=0
persist.sys.NV_STEREOSEP=20
# Increase jpg quality to 100%
ro.media.enc.jpeg.quality=100
# Force GPU Rendering on 2d Operations
debug.sf.hw=1
debug.egl.profiler=1
debug.egl.hw=1
debug.composition.type=c2d
# Hardware Acceleration Enabled
video.accelerate.hw=1
# Enable 16bit Transparency
persist.sys.use_16bpp_alpha=1
#NEW
# Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
#End
U can Use Root Explorer app or notepad++ to edit your build.prop
Remember to set the permission to rw-r-r after editing ( If you don't do it your device gonna brick)
Technically it has to work with any phone with Android L but I am not responsible for any damage
Please always pay attention to risk of soft bricking
If something goes wrong use your backup build.prop to get the default settings
Does it work for your phone ? U tell me ( with details )
Send me feedbacks about your phone and I am gonna put it in the Tested List
XDA:DevDB Information
Best build.prop tweaks 4.4.4 & 5.0.2 & 5.1.1 (updated-Jan2016), Tool/Utility for the Samsung Galaxy Grand Prime
Contributors
adblocker
Version Information
Status: Stable
Current Stable Version: 1.2.1
Stable Release Date: 2015-11-01
Created 2015-08-27
Last Updated 2016-10-28
Reserved
Working great on my G530FZ
Hi.my phone is g530h.plz linke of lp rom for me. (To test this build prop)
Sent from my SM-N9005 using Tapatalk
G530 fz
Hello
G530 fz ?
Office. Fab said:
Hello
G530 fz ?
Click to expand...
Click to collapse
working !
roozbeh158 said:
Hi.my phone is g530h.plz linke of lp rom for me. (To test this build prop)
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Your Base band is HXX ! you got to wait for that !
working fine on my G530H
can someone make it flashable zip or something i copied all the lines but after reboot i stuck on black screen
Crimmy20 said:
can someone make it flashable zip or something i copied all the lines but after reboot i stuck on black screen
Click to expand...
Click to collapse
I think u didn't change the permissions ! please change the permissions after editing to rw-r-r or 0644 with the app
do i need set permissions to the build.prop file or for the system folder? and if i made changes app just backed up my original build.prop should i need to delete it ? sorry for my silly questions
G530BT?
This should go in general section not here.
it wont work on kitkat right ?
sorry im just new to this
AJexplorer said:
it wont work on kitkat right ?
sorry im just new to this
Click to expand...
Click to collapse
working on the kitkat too
Crimmy20 said:
do i need set permissions to the build.prop file or for the system folder? and if i made changes app just backed up my original build.prop should i need to delete it ? sorry for my silly questions
Click to expand...
Click to collapse
just the build.prop file !
set it to rw-r-r
math_natividade said:
G530BT?
Click to expand...
Click to collapse
should work ! but I am not sure :0
adblocker said:
should work ! but I am not sure :0
Click to expand...
Click to collapse
How about SM-G530H?
genesisbaliw said:
How about SM-G530H?
Click to expand...
Click to collapse
Working 100%
dcduartee said:
Working great on my G530FZ
Click to expand...
Click to collapse
Confirm!It works well in my G530FZ
Tanks
:good:
Hi, guys! New user here and let's start!
Well, I own a tablet which the model is Innovator 7DTB41...
I bought it from Greece!
Although I found out that model's name varies at Amazon which there is named Hipstreet 7DTB41-8GB Electron 7" (Quad Core 1.3GHz Google Certified Android 5.1 (Lollipop) Tablet 8GB -Black). I'm sure 99% that Amazon's link have right specs with the other link from E-shop that i bought it!
The images from Amazon, like volume button, power button, port micro USB, port auxiliary are the same position with my tablet! If that tells something!
At first, the tablet was rooted to remove bloatware, and I tweaked the build.prop...The tweak settings I'll write them below... the problem is that suddenly the internal storage went from (read-write) to (read-only) and when I was changed back to read-write with ES file explorer it didn't do something.. So I decided to give a reboot if this fixes the problem...After the reboot, the OS disappeared and more simple it does not boot...
Also, it has recovery and I just boot into that! The choices that were given to me is 7
Android system recovery <3e>
7DTB41_20170119
1. Reboot system now
2. apply update from ADB
3. wipe data/factory reset
4. wipe cache partition
5. reboot to bootloader
6. power down
7. View recovery logs
Recovery system v5.0
E: failed to mount /mnt/internal_sd (No such device)
Tweak Settings:
#Faster Scrolling
ro.max.fling_velocity=12000
ro.min.fling_velocity=8000
#Liquid Smooth Ui (not the custom rom)
persist.service.lgospd.enable=0
persist.service.pcsync.enable=0
ro.ril.enable.a52=1
ro.ril.enable.a53=0
#Better internet browsing & download speed
net.tcp.buffersize.default=4096,87380,256960,4096, 16384,256960
net.tcp.buffersize.wifi=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.umts=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.gprs=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.edge=4096,87380,256960,4096,163 84,256960
net.tcp.buffersize.hspa=6144,87380,524288,6144,163 84,262144
net.tcp.buffersize.lte=524288,1048576,2097152,5242 88,1048576,2097152
net.tcp.buffersize.hsdpa=6144,87380,1048576,6144,8 7380,1048576
net.tcp.buffersize.evdo_b=6144,87380,1048576,6144, 87380,1048576
# Saves some battery without reducing performances
wifi.supplicant_scan_interval=497
pm.sleep_mode=1
power.saving.mode=1
ro.ril.disable.power.collapse=0
ro.vold.umsdirtyratio=20
# Increase general Performance
debug.performance.tuning=1
# Increase some Performance
ro.secure=0
persist.sys.use_16bpp_alpha=1
ro.product.gpu.driver=1
ro.min.fling_velocity=8000
# Reduce the black screen time of the proximity sensor
ro.lge.proximity.delay=15
mot.proximity.delay=15
# Increase camera's photo and video recording quality
ro.media.dec.jpeg.memcap=8000000
ro.media.enc.hprof.vid.bps=8000000
ro.media.enc.hprof.vid.fps=65
#Better RAM managment
ro.HOME_APP_ADJ=1
Disables built-in error reporting.
profiler.force_disable_err_rpt=1
profiler.force_disable_ulog=1
#Disables logcat
logcat.live=disable
#Faster boot.
ro.config.hw_quickpoweron=true
#Disables error checking.
ro.kernel.android.checkjni=0
ro.kernel.checkjni=0
#Disables sending of usage data.
ro.config.nocheckin=1
#Disable strict mode checking.
persist.android.strictmode=0
#build.prop tweaks for improved performance
debug.performance.tuning=1
Thanks for reading until now!!
Sorry for any mistakes! I cannot put links! :/
angel1998 said:
So I decided to give a reboot if this fixes the problem...After the reboot, the OS disappeared and more simple it does not boot...
Also, it has recovery and I just boot into that! :/
Click to expand...
Click to collapse
Γειά σου φίλε!!!
Have to keep it in English though for everybody to understand. If system partitions got messed up trough the process you described, well... Chances are you might need to flash full stock...
However... Since you can get to stock recovery, can you do a factory reset? Does it work? Or does it come back giving you a whole bunch of red lettered errors? If that is the case full stock flashing is the solution...
Unfortunately, I personally can't think of a way to make this work without losing your data. But, hey... You won't through away the device!!!
Post a little more info if you wish, or update on how you are doing with the device, so others can also help. Also please check your private messages.
Well, guys, I gave up, cause Windows doesn't recognize the tablet in download mode or in bootloader, and I had to mess finding drivers which are not easy with this whatever brand name is and i sent it to the shop i bought, and they will give me a replacement!
Special thanks to r&xp for helping me at private messages!