Related
Ok I'm all set now, I got everything flashed, but now I sill have question.
I started with the ENG H boot then I wen to the safer hacked one.
I'm looking for ROMS now and they have a PH98IMG file. Is that the kernel or updated firmware? I wouldn't want to flash different firmware right?
also what about the old firmware patch for ICS roms?
http://forum.xda-developers.com/showthread.php?t=1614180
Do I need to be using that as Im still on the GM H boot?
and finally what about mainver errors? since Im s off will that still warn me?
I just want to be careful not to do anything I shouldn't now that most of the safety nets are gone.
Also sorry of my questions are silly, its late at work and I've been starting at this screen all day. Its time to go.
thanks
loki993 said:
Ok I'm all set now, I got everything flashed, but now I sill have question.
I started with the ENG H boot then I wen to the safer hacked one.
I'm looking for ROMS now and they have a PH98IMG file. Is that the kernel or updated firmware? I wouldn't want to flash different firmware right?
also what about the old firmware patch for ICS roms?
http://forum.xda-developers.com/showthread.php?t=1614180
Do I need to be using that as Im still on the GM H boot?
and finally what about mainver errors? since Im s off will that still warn me?
I just want to be careful not to do anything I shouldn't now that most of the safety nets are gone.
Also sorry of my questions are silly, its late at work and I've been starting at this screen all day. Its time to go.
thanks
Click to expand...
Click to collapse
ROMs generally will never have firmware present unless it specifically states otherwise (perhaps somebody will release one after an OTA if there's a new firmware update). Prior to last week, we all had S-ON (well most of us) so all ROMs came with a script that would dump the boot.img (kernel and RAMdisk) into a PH98IMG.zip, then reboot to bootloader so you can flash it.
Use the old firmware patch for ICS ROMs only if you are on HBOOT 2.11 or lower.
I'm not sure about mainver issues... I don't think they matter now... but if you do get that error there's a simple fix thats been around for awhile.
I am on 2.11 so I would need the patch. Is it ok to use even it I'm not on am ics Rom, should I flash it just in case or wait until I need it.
Yeah I was kinda thinking the same thing about the mainver. Not sure either though
Sent from my ADR6425LVW using Tapatalk
loki993 said:
I am on 2.11 so I would need the patch. Is it ok to use even it I'm not on am ics Rom, should I flash it just in case or wait until I need it.
Yeah I was kinda thinking the same thing about the mainver. Not sure either though
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
The patch is apart of the system so you only flash it when you are going to run a ics Rom based on the ics firmware. You already have the patch files in the Rom you are running if its GB. But when you flash a new Rom the system is wiped which is why you need to flash the patch. I hope I explained that ok.
Sent from my HTC Vigor
Thanks for this thread, answered some of my nagging questions
Andro X said:
The patch is apart of the system so you only flash it when you are going to run a ics Rom based on the ics firmware. You already have the patch files in the Rom you are running if its GB. But when you flash a new Rom the system is wiped which is why you need to flash the patch. I hope I explained that ok.
Sent from my HTC Vigor
Click to expand...
Click to collapse
I understand, its ok. You right though dont know what I was thinking, of course the system gets wiped.
Im debating which ROM to run now. I was going to go with one of the BAMFs, but I also would mind a senseless ROM either.
Is it wrong that I actually kinda like Sense, I just wish it didnt bog the phone at times.
Also I thinking its probably best to say on the 2.11 firmware, that way I can still run GB if I want and go to ICS ROMS too if I want with the patch.
I like sense too especially since this is my first HTC phone so its something different for me. I had Motorola's in the past. I'm on GB firmware with the eng hboot and running ics Clean Rom.
Sent from my HTC Vigor
Well Sense is certainly an upgrade for me from TouchWiz....I miss a few things but overall it is better...
I think you would be happy with CleanROM, extremely fast and reliable ICS build. You would never know it wasn't stock.
I have my own silly question...why do I need htcdev unlocked to get s-off. Just rooted and s-offed my of MT4G for the fun of it. Seems like we should be able to s-off without official unlock support
Sent from my ADR6425LVW using xda premium
Geoi1006 said:
I have my own silly question...why do I need htcdev unlocked to get s-off. Just rooted and s-offed my of MT4G for the fun of it. Seems like we should be able to s-off without official unlock support
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
Not sure about MT4G, but I don't think the control bear program can access everything it needs on the Rezound without being unlocked. Just a guess mind you .
Geoi1006 said:
I have my own silly question...why do I need htcdev unlocked to get s-off. Just rooted and s-offed my of MT4G for the fun of it. Seems like we should be able to s-off without official unlock support
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
You have to be rooted to acquire s-off. Up until this point you had to be unlocked to acquire root. Now, if you are s-off you can root without unlocking. It's a vicious circle! Lol!
I just haven't gotten to unlock since I don't have home internet access
Sent from my ADR6425LVW using xda premium
So my ReZound is getting way too hot and there are so many different threads with different opinions.
I just want a straight and bold answer...
Verizon care or not if the phone says Re-Locked?
Will I get in trouble or what?
Why take the chance ? Run the release update , then relock and no way in hell would they know . I returned four phones already and not once have they said any thing
Sent from my ADR6425LVW using xda app-developers app
Kratz17 said:
So my ReZound is getting way too hot and there are so many different threads with different opinions.
I just want a straight and bold answer...
Verizon care or not if the phone says Re-Locked?
Will I get in trouble or what?
Click to expand...
Click to collapse
They do not care. I've returned one no issues.
jmichaels1982 said:
Why take the chance ? Run the release update , then relock and no way in hell would they know . I returned four phones already and not once have they said any thing
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I'm S-Off too. So just run the latest gb ota. Then s-on and relock.
In that particular order or...?
do Not not not not lock with jumper hboot. Run the ruu twice , the official gb one , that will restore your hboot , then relock , easy process will save you potential headaches
ask not what your developer can do for you, ask what you can do for your developer.
Yea all you gotta do is RUU back to GB then your fine you don't need to relock because the RUU does that. You can also leave it S-OFF because some are like that anyways I left the one I sent back S-OFF.
Also you only need to run the RUU once as long as when it's done all the items say "ok" next to them.
Sent from my Sense 4 ICS Rezound
Ok thank you guys I'm gonna do that
Let's say your on the latest leak and need to send in for warranty will the s- off process work on that leak?
Sent from my ADR6425LVW using xda premium
so far all of the hboots and ruu are exploited so yes, even with the lates ics leak ( not sure about .13 though , but mine was on the .10 leak ). so s-off , ruu to gb then s-on , I CAN NOT EMPHASIZE HOW IMPORTANT IT IS TO ONLY S-ON AFTER YOU PUT BACK THE STOCK H-NOOT
jmichaels1982 said:
so far all of the hboots and ruu are exploited so yes, even with the lates ics leak ( not sure about .13 though , but mine was on the .10 leak ). so s-off , ruu to gb then s-on , I CAN NOT EMPHASIZE HOW IMPORTANT IT IS TO ONLY S-ON AFTER YOU PUT BACK THE STOCK H-NOOT
Click to expand...
Click to collapse
+1 but you really don't need to S-ON to return it.
Sent from my Sense 4 ICS Rezound
How are we supposed to s-on after running an ruu? Is there another way to do it besides the write secureflag command; I thought stock, locked hboot's don't accept fastboot commands?
Sent from my ADR6425LVW using Tapatalk 2
yes it does
DbZ Gokuu said:
How are we supposed to s-on after running an ruu? Is there another way to do it besides the write secureflag command; I thought stock, locked hboot's don't accept fastboot commands?
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
it does accept commands, just not all of them, this one does accept the write secure, try it, it never failed me.
If I'm S-On and on the latest ICS RUU, I can't RUU to gingerbread without S-Off, right? Is the safest thing to do to just install a stock gingerbread rom with some sort of patch?
Edited to add: I'm also on the 2.25 Hboot, which I can't S-Off from, right?
As long as your just returning it to Verizon just flash a stock rom or ruu and they won't notice/care. If you ever had to warranty it with htc though I would lock it down and return the whole phone to normal.
Man, this is good news. I have a hardware issue but I thought that being unlocked meant I'm screwed. I'll run the GB RUU to clear any evidence of being unlocked and request my warranty replacement.
Im currently s-on unlocked running Clean rom 4.5 developers edition and my hboot version is 2.10 with the GB patch. I've been thinking about attempting s-off but so far the one step I need to figure out is how to get back to a stock gb or ics rom (prerequisite to performing s-off I believe)
What are my options here? Do I need to re-lock my phone, run a ruu, then unlock again?
Is there a zip file I can flash to get a stock rom loaded without re-locking then unlocking?
Any help or advice is greatly appreciated, thanks in advance!
Jbear s-off wants a stock rooted phone because it is too much for their tech support people to deal with all the many ROMs in existence.
A Rom that is close to stock like cleanrom has a good chance of working with the jbear s-off process, but I do not know for sure.
Since you have gingerbread firmware, you should use the gingerbread rezound jbear download, IF you decide to attempt it.
On the other hand we have official ics now, and you might as well move onto it rather than using gingerbread firmware and a ROM that will never get updated because the author moved on to buy a different smart phone.
The ics ruu will do a factory reset and wipe the internal sdcard. The removable microSD card should be left untouched. you will need to relock the bootloader to run the ruu, but it easy to relock with hansoon's all in one toolkit if you have saved your htcdev.com unlock bin file.
Here is the official ics ruu file, if you decide to install it.
http://www.androidpolice.com/2012/0...cream-sandwich-ruu-for-final-ota-3-14-605-12/
regards,
Howard
Thanks for the response! I've downloaded the ruu for ics & I still have the htc unlock code. I will give this a try hopefully this weekend
Sent from my ADR6425LVW using xda app-developers app
Is juniperbear working on a S-Off file for the newest RUU 4.03.605.2 or should we just use the 3.14 to get S-off then install the newest RUU 4.03
troy7548 said:
Is juniperbear working on a S-Off file for the newest RUU 4.03.605.2 or should we just use the 3.14 to get S-off then install the newest RUU 4.03
Click to expand...
Click to collapse
I was on 605.2 when I used juniperbear's method.
I recommend using an insulated paper clip. I got s-off after 2 tries on my wife's phone.
Which download from juopuntobear did you use with the 605.2 ics?
It doesn't look like it is supported on their site...
Sent from my ADR6425LVW using xda app-developers app
bkhorn said:
I was on 605.2 when I used juniperbear's method.
I recommend using an insulated paper clip. I got s-off after 2 tries on my wife's phone.
Click to expand...
Click to collapse
I tried a paperclip and it would not take. I ended up using a piece of 20 gauge wire from an old RC battery pack. Worked then.
Sent from my ADR6425LVW using Tapatalk 2
Anyone? Which jupontobear download do you use with the latest 605.2 ics?
Sent from my ADR6425LVW using xda app-developers app
1967ls2 said:
Anyone? Which jupontobear download do you use with the latest 605.2 ics?
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
the one for ics .5
Perfect, I will make sure to download that one when trying this.
Sent from my ADR6425LVW using xda app-developers app
Alright, I got my refurb, and have unlocked it. It has the .12 Firmware. I can't find a simple way to root the new firmware. Nils 1 click root isn't helping. What can i do to root it. I have Amonra Recovery, and stock rom..Any help is appreciated.
Download superSU and flash in amonra. You should be good to go.
Sent from my ADR6425LVW using xda app-developers app
I had been reading so many different guides that I was suffering from information overload. I couldn't believe I overlooked something so simple. Thanks for the,quick reply, and it shows it doesn't take someone with a lot of posts to help someone who usually is a old hat at this.
Sent from my ADR6425LVW using Tapatalk 2
confused semi-noob, please help
Currently running rezrom ex v.3.4 with ics 3.11.605.22. I have seen this question asked a few times in different places throughout the forum but am still a little unsure as to what is best or whether it matters at all. I've heard it is best to return to stock rom before attempting s-off but I've also heard that others with my rom have not had any problems. So if I s-off with my current rom, and it works, I will still have root and be able to flash the most current ruu, right? Where as if I were to try to flash the most current ruu now, I would have to first relock the bootloader, then once on the new ruu, I would have to unlock from htcdev again and flash amon ra again and re-root before being able to s-off. If I have this right, then there is no real downside (besides it possibly not working) to trying to s-off now with my current rom. In fact, it would be less time consuming and less confusing, correct? I've been trying to read everything possible on getting my phone to s-off, but I think at this point, I'm just getting more confused with the more I read.
I wish I had an answer for you. Im in the same boat as you, read a lot, still confused.
I think im in boat number two, re lock, flash newest ics ruu, unlock, try to s-off, but what im not 100% sure of is which juopuntobear to download & use.
Post back in the thread if you are able to s-off with the rom your running. Maybe I will try with the rom im running & just say screw it.
Sent from my ADR6425LVW using xda app-developers app
re
You are supposed to use the version that is current with the ruu that your running. For instance, mine is the early ics leak. If you update to a more current ruu when reverting to stock, you should choose one that jb made a exploit for (v. 3.13..., or 3.14...). Of course, I'm still semi-noon so this is just my best educated guess from my studying of these forums. I would be very grateful if one of the devs would correct me though... Please.
i did it!
So I decided to s-off with my current Rom installed. It worked but my phone didn't recognize my ext sd. I tried all the fixes available and nothing worked, so instead, I flashed the newest ruu. That fixed my problem but I didn't have recovery anymore. I found a ph98img for an older version of amon ra and replaced the IMG file in the zip with a recent version and edited the text file to show my current mainver. I flashed the new ph98img rough bootloader and now have amon ra and was able to flash a new Rom. The reason I used a ph98img was because I was no longer around a pc to flash it through fastboot. It all worked great but took a bit of time.
Nice! Glad it all worked out. I guess I would need to download juopuntobear for gb & try that.maybe I will give it a try.
Sent from my ADR6425LVW using xda app-developers app
I have Hboot 1.15, Fresh EVO OS. And used the Regaw Autoroot following the OTA Update. I heard you can do this using fastboot or HTCdev, but I'm not sure how to do this... And could not find any answers (My concern is that the new FRESH updates use the new radios, and I updated to it, but can't flash the new radios)
If this has already been answered I apologize, but I couldn't find it.
Thank you for the help!
Dude there's threads all over the forum about this issue. Just spend 2minutes looking and you'll be all set
Sent from my EVO using xda app-developers app
You can't update radios if you are s-on hboot 1.15. Your only option to update the radios is to relock and take the ota or install the new ruu. Then unlock again, install twrp, and then install your favorite rom. As many will state, never take the ota because you may loose ability to get s-off in the future. This may be true, but there is no s-off solution for your hboot anyway so you might as well bite the bullet now and live in the present instead of waiting for something that may never happen in the future.
Interesting. All right Thanks for your help. And as for there being threads "all over" I was getting conflicting reports, since I saw on one page where it was possible to flash using HTCdev with S-on, but there was no link or instructions given.
To address ur main concern, there is no need to update your radios. If you want to run a rom that is based off the latest update all u need to do is make sure your kernel matches the kernel in the rom. You can update your kernel with Flash img GUI, found in the app store. Just download the rom u want open flash img GUI select the rom and choose to flash kernel img. Once complete, wipe and flash rom. Njoy!
Sent from my EVO using Tapatalk 2
eddy0090 said:
To address ur main concern, there is no need to update your radios. If you want to run a rom that is based off the latest update all u need to do is make sure your kernel matches the kernel in the rom. You can update your kernel with Flash img GUI, found in the app store. Just download the rom u want open flash img GUI select the rom and choose to flash kernel img. Once complete, wipe and flash rom. Njoy!
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
I would HIGHLY suggest against flash gui if you haven't properly learned to fast boot flash it
Sent from my EVO using Tapatalk 2
Rxpert said:
I would HIGHLY suggest against flash gui if you haven't properly learned to fast boot flash it
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Then how do i proceed to relock my bootloader if I am 1.5 so i can receive the OTA?
Fastboot OEM lock
This stuff is in my guide, I wish more people would actually read it lol
someoneshero34 said:
Interesting. All right Thanks for your help. And as for there being threads "all over" I was getting conflicting reports, since I saw on one page where it was possible to flash using HTCdev with S-on, but there was no link or instructions given.
Click to expand...
Click to collapse
Yup. Sorry about my response. I reread it and it does sound a harsh to me now. Anyways you got the info you need so good luck with your phone and sorry again
Sent from my EVO using xda app-developers app
om4 said:
Fastboot OEM lock
This stuff is in my guide, I wish more people would actually read it lol
Click to expand...
Click to collapse
LOL - I've never seen you guide before, I will definetly open it print it/ and read it. It is appreciated.:highfive::good:
I'd also suggest against taking the ota, but that's just me.
Sent from my EVO using Tapatalk 2
S-on hboot 1.12
Ok, so I'm rooted, s-on with hboot 1.12. I was able to do the firmware update and update the radios. I've read like crazy and I'm not seeing anywhere I can update the PRI without s-off. Is this correct? One thread said I can flash anything since I'm hboot 1.12 so I'm confused.
hppowers said:
Ok, so I'm rooted, s-on with hboot 1.12. I was able to do the firmware update and update the radios. I've read like crazy and I'm not seeing anywhere I can update the PRI without s-off. Is this correct? One thread said I can flash anything since I'm hboot 1.12 so I'm confused.
Click to expand...
Click to collapse
If you're on hboot 1.12, I suggest using lazypanda to get s-off right away before doing anything else.
"We're coming from a pure power source"
metalfan78 said:
If you're on hboot 1.12, I suggest using lazypanda to get s-off right away before doing anything else.
"We're coming from a pure power source"
Click to expand...
Click to collapse
I'm a little bit hesitant to do that since I've read it can go crazy wrong and I'm not as savvy with the phones as the folks on the forums. Do I have to though in order to update my PRI?
I'm not sure, I've been s-off since I got the phone.
"We're coming from a pure power source"
I am S-ON HBoot 1.15. Is it possible to flash HTC Stock recovery, go to stock rooted rom, use OTA root Keeper and take the new OTA?
You don't need OTA root keeper because your going to have to do HTC dev to unlock the device again.
With that being said I wouldnt recommend taking the OTA or running the ruu to update because you'll be on the new hboot
Sent from my EVO using Tapatalk 2
Not to mention the new base for stock has introduced a few of its own issues that the new firmware/hboot can not fix. Several people have attempted to downgrade thinking its the best alternative and brick their phones in doing so. The new firmware doesn't change much anyway
Hi guys,
Im sorry if this irritated your eyes.
Im new with android and i got my phone from my friend, a second hand phone.
Can you please let me know about my phone information about my phone ROM, and i read about kernel also hete in forum?
I did attached a screenshot. Thanks in advance.
Sent from my ADR6425LVW (i did change the phone name but that still appears)
Vascoti said:
Hi guys,
Im sorry if this irritated your eyes.
Im new with android and i got my phone from my friend, a second hand phone.
Can you please let me know about my phone information about my phone ROM, and i read about kernel also hete in forum?
I did attached a screenshot. Thanks in advance.
Sent from my ADR6425LVW (i did change the phone name but that still appears)
Click to expand...
Click to collapse
Seems stock, we need a screenie of the kernel and baseband version to tell you what firmware version you have although it looks like the ics ota.
Boot into bootloader by
1. Pull battery and replace
2. Hold volume down + power until hboot shows up
3. Look at s off/s on status, radio versions and if it says unlocked or tampered at the top.
Tampered means there is a custom recovery installed and probably rooted, this is good if you wanna flash a ROM.
Sent from my ADR6425LVW using xda app-developers app
Hi squirrel!
Thanks for your explanation.
I wil do it now.
Wait me.. (lol..)
Many thanks!
Sent from my ADR6425LVW
Hi mate,
Got the ss using wifey's phone camera.
Please let me know. And can i do more with this rom or should i flash it and change it?
Thanks!
Sent from my ADR6425LVW
I have another ss from the setting thingy..
Hehe.. Many thanks for explanation.
Sent from my ADR6425LVW
Looks like you have the leaked global ics ruu firmware from mid 2012 and a rom based on it. Since you are still s-on, you may find it difficult to revert back to anything older (such as the official ics). The kernel looks to be the one included in the leaked ruu as well.
Hi mate,
Is that mean something? Bad or good maybe?
So the step is make it s-off, flashing the rom, and.... Am i right?
I dont get any trouble with thia phone. I just want to know are there any better setting than i have? If not maybe i'll stick with this one. (for battery and performance maybe)
Looking forward from you all...
Sent from my ADR6425LVW
gr8nole said:
Looks like you have the leaked global ics ruu firmware from mid 2012 and a rom based on it. Since you are still s-on, you may find it difficult to revert back to anything older (such as the official ics). The kernel looks to be the one included in the leaked ruu as well.
Click to expand...
Click to collapse
I dont want to revert back to official. I want to move forward as long it will give me a benefit by changing the phone settings/installed i have now.
If you please willing to tell me the step, i'll do the rest myself.. Hehe.
Wich is first? Make it s-off?
Thanks..
Sent from my ADR6425LVW
Vascoti said:
I dont want to revert back to official. I want to mobe forwars as long it will give mr a benefit by changing the phone settkng i have now.
If you please willing to tell me the step, i'll do the rest myself.. Hehe.
Wich is first? Make it s-off?
Thanks..
Sent from my ADR6425LVW
Click to expand...
Click to collapse
1. S-off. You may have to relock to perform the s-off. I can't remember. Go do your research before starting.
2. Flash venom Rom. This is an ics Rom with zero bugs.
3. Flash the team bamf kernel (made by same developer) this kernel will increase your battery life by about 50%
Good luck
Sent from my s-off Rezound
Piaband said:
1. S-off. You may have to relock to perform the s-off. I can't remember. Go do your research before starting.
2. Flash venom Rom. This is an ics Rom with zero bugs.
3. Flash the team bamf kernel (made by same developer) this kernel will increase your battery life by about 50%
Good luck
Sent from my s-off Rezound
Click to expand...
Click to collapse
Oke Piaband..
So the s-off first.
Thanks mate.
Going to start a little adventure here on forum.
Sent from my ADR6425LVW
S off might come off as confusing..
It's not necessary some kernels will flash via ph98img (the bootloader will search for this and ask you to install the update)
Joelz (maker of viperrez and bamf kernel) has implemented this in his rom and kernel.
If your s on, normally you would need a computer to flash the boot.img separately via fastboot commands (search more about using adb and fastboot)
Sent from my ADR6425LVW using xda app-developers app
Vascoti said:
Oke Piaband..
So the s-off first.
Thanks mate.
Going to start a little adventure here on forum.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
You don't need to s-off. S-off makes flashing a ROM a little easier by automatically flashing the kernel afterwards, but as was mentioned, these days a lot of ROMs make the kernel file for you and the phone goes to hboot and you just accept the update and it flashes it for you.
s-off makes it easier to brick your phone. So it may be better to stay s-on until you get the hang of the Rezound way of doing things. I'm s-on and on the same global leak and I have no problem with it. The ROM I run, EclipticRez makes a PH98IMG file for the kernel so it's easy peasy.
So you are probably ready to flash a ROM. But I would check what recovery you have on there. Boot into bootloader as you did before then navigate to recovery. The two main ones used for the Rez are Amon Ra and TWRP. Amon Ra is currently at v3.16, I don't know about TWRP but you can find it in the Development section and find out. Then once you know you have the latest recovery you can flash a ROM. There should be instructions in the thread for how to flash the ROM and if you need the kernel separately the dev usually posts it for download, otherwise you have to pull it out of the ROM and flash it using fastboot.
Seems a lot to learn.
But, thank you guys.
I will keep searching the forum to find out more info before i decide to flash.
Thanks for al advices and nice to know you all here.
Sent from my ADR6425LVW
feralicious said:
You don't need to s-off. S-off makes flashing a ROM a little easier by automatically flashing the kernel afterwards, but as was mentioned, these days a lot of ROMs make the kernel file for you and the phone goes to hboot and you just accept the update and it flashes it for you.
s-off makes it easier to brick your phone. So it may be better to stay s-on until you get the hang of the Rezound way of doing things. I'm s-on and on the same global leak and I have no problem with it. The ROM I run, EclipticRez makes a PH98IMG file for the kernel so it's easy peasy.
So you are probably ready to flash a ROM. But I would check what recovery you have on there. Boot into bootloader as you did before then navigate to recovery. The two main ones used for the Rez are Amon Ra and TWRP. Amon Ra is currently at v3.16, I don't know about TWRP but you can find it in the Development section and find out. Then once you know you have the latest recovery you can flash a ROM. There should be instructions in the thread for how to flash the ROM and if you need the kernel separately the dev usually posts it for download, otherwise you have to pull it out of the ROM and flash it using fastboot.
Click to expand...
Click to collapse
Hi feralicious,
Will check it soon.
And can i back to you with questions?
I was a BlackBerry user and ita really easy to Upgrading. Now imma lil bit mad. Haha!
(Was thinking about i installed my o2 stealth years ago and was an easy task by following this forum thread without asking or a single post.
Now droid make it harder to do..)
Sent from my ADR6425LVW
Squirrel1620 said:
S off might come off as confusing..
It's not necessary some kernels will flash via ph98img (the bootloader will search for this and ask you to install the update)
Joelz (maker of viperrez and bamf kernel) has implemented this in his rom and kernel.
If your s on, normally you would need a computer to flash the boot.img separately via fastboot commands (search more about using adb and fastboot)
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I got win7 64bit.
Didnt search it yet because lil bit busy moving.
Well, i hope it wont be a problem instaling all driver and other thing to do flash, etc.
Wish me luck..
This is my first droid.. If this running well maybe will flash wifey's samsung g-tab 10.1 LOL....
Sent from my ADR6425LVW
feralicious said:
You don't need to s-off. S-off makes flashing a ROM a little easier by automatically flashing the kernel afterwards, but as was mentioned, these days a lot of ROMs make the kernel file for you and the phone goes to hboot and you just accept the update and it flashes it for you.
s-off makes it easier to brick your phone. So it may be better to stay s-on until you get the hang of the Rezound way of doing things. I'm s-on and on the same global leak and I have no problem with it. The ROM I run, EclipticRez makes a PH98IMG file for the kernel so it's easy peasy.
So you are probably ready to flash a ROM. But I would check what recovery you have on there. Boot into bootloader as you did before then navigate to recovery. The two main ones used for the Rez are Amon Ra and TWRP. Amon Ra is currently at v3.16, I don't know about TWRP but you can find it in the Development section and find out. Then once you know you have the latest recovery you can flash a ROM. There should be instructions in the thread for how to flash the ROM and if you need the kernel separately the dev usually posts it for download, otherwise you have to pull it out of the ROM and flash it using fastboot.
Click to expand...
Click to collapse
Mate,
It only show me blue texts around.
Wich menu should i execute?
I did a restore menu before it only asking permission to restore without any info what kind of file to restore.
Any other solution how do i find out?
I have a rom toolbox and when i go to rom mamagement and flash recovery, please see attached file. That is all the list i got.
Edit: meh,,, you mention TWRP before.
Yes it is TWRP. So i need to find the latest one on forum and compare it with mines, right?
Sent from my ADR6425LVW
Hi guys,
Is this my custom recovery type?
I only seen worldclockmod there..
Please find picture attached.
And can i change it to amon ra?
Or once installed it cant be change anymore? If yes maybe im going to install amon ra because it looks more familiar?
Sent from my ADR6425LVW
Vascoti said:
Hi guys,
Is this my custom recovery type?
I only seen worldclockmod there..
Please find picture attached.
And can i change it to amon ra?
Or once installed it cant be change anymore? If yes maybe im going to install amon ra because it looks more familiar?
Sent from my ADR6425LVW
Click to expand...
Click to collapse
Yes that is your recovery. I personally like TeamWins recover because I hate using vol to scroll.
Sent from my HTC6435LVW using xda app-developers app
kaliblazin707 said:
Yes that is your recovery. I personally like TeamWins recover because I hate using vol to scroll.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
You do realize that you can use the 4 buttons at the bottom (Home, menu,...) to scroll and select in Amon Ra, right? Much easier than using the volume and power buttons.
So guys...
Can i change it to amon ra?
I got a little food tutor how to s-off.
But i want to unroot first.
Well, i will be back soon when the phome wont booting. LoL
Sent from my ADR6425LVW