Error with new SD card - Galaxy S II Q&A, Help & Troubleshooting

Hey. I bought a new _cheap_ SDHC card online, 32gb... When I put it in my phone, the phone gets pretty slow while there's a notification saying "Preparing SD card" "Checking for errors."
Now it stays there for a long while and the phone gets very hot... Is the card defect or is there something that can be done?

Have a look for H2testw

Well the problem is that i can't mount the card since i don't have a card reader...

Please forgive me for not being psychic, you didn't say that originally.

No need to be hostile man.

Anyways, i let my phone run for a few hours, still nothing...
Does anyone have any idea? The phone IS rooted, so that might have something to do with it, gonna try to unroot it today to see if that makes any difference.

this happened to once, I bought a 32 GB from amazon and it was cheap. It was a disaster, all my data I stored in it was erased spontaneously. I returned it and had a refund. My guess, the sd_card is inferior

y don u get a cardreader an check for eerors or format an c....or u can set usb debugging and do tht if dont hav card reader...some use 64gb card wiv no prblm..

You don't need a card reader to check for errors if you don't have one. Just plug your phone with the card in it into a computer and search for your card in windows explorer and check for errors there. You can also format it from there also.

I managed to check it on a card reader today, windows does recognize something is going but doesn't allow me to format it or do anything except change the drive letter basically... When i check it through computer -> manage -> disk management it shows it as a MBR? Why is that and any way to go around it?
Oh and i can't access the card while it's in my phone at all, it just keeps looking for errors and doesn't mount it?

preparing SD Card and checking for errors
I am also having the same problem, My sd card always shows the message Preparing sd card and checking for errors in galaxy fit and I have formatted it in my pc and then tried all the other methods like deleting the msdos file from system/bin etc but still the problem persists. would there be any problem with my phone of sd card slot kindly reply

Related

How to format micro SD

Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Sniuk said:
Hi,
I would like to format my micro SD card, but I don't know how to.
I know that there is an option that says " clear storage" but it is for internal storage only ? or can format as well the sd card?
I haven't any card reader on my pc, so I have no idea about how to do it from Hermes itself. .
REgards
Click to expand...
Click to collapse
Keep your micro sd in card reader , you can format it only from pc.(buy one card reader)
if you want format micro sd from device , you need a 3d part application , but from pc is better.
Regards
Imdantes
The resco explorer, has a format storage card utility
I have done it already, and works fine.
pocket mechanic works well, also finds errors, cleans up, makes coffee etc
If you're on XP, just right go into disc management, find the card, right click, and choose format...likely a similar method on Vista, but I haven't used it.
No third party tools needed, etc.
Edit, oops my bad, I misread that you didn't have a card reader for the pc.
Another vote for Resco explorer btw, I couldn't live without it.
Well, I got 4GB Micro SD. Formatting (FAT32) done through PC but never been possible through Artemis by any of the softwares mentioned here. The SD works fine under windows, but I gatta take it out in every new ROM or Radio flashing. Is there any way to make it being seen by Artemis DOS system?
Thanks
problem with my 4gig micro sd
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
nio.elsinore said:
hey guys...
about this topic...
i have a problem..
i have a 4gig micro sd for dopod 838 pro..
i think.. i had a virus the problem is..
i can no longer see the storage card neither on my phone nor on my pc...
how can i get to format it?..
at first it was working just fine but all of a sudden i can no longer show the sd...
what can i do?..
pls. help...
salamat!!/thanks!!/arigto!!/
Click to expand...
Click to collapse
Delete the folder "MSMETADATA" on your storage card and do a soft reset and that should work
Unless of course the sd card has failed... I had one or two do that... All you have, if the pc won't recognise to format, is a lump of plastic.... You'll have to get a new one...
phone no longer recognizes sdhc card
Okay, guys I flashed my hermes this morning with this
http://rapidshare.com/files/2179382...1.255.1_102_6275_1.38.00.10_108_Ship.exe.html and now it no longer recognizes any of my micro sd nor my micro sdhc cards. They come up on the computer but not on the device. I even installed the sdhc.777 cab and it still doesn't work. Help please...
refuse2bstopped, try a different os... If that doesn't work you may have a broken or misaligned pin in your usb reader on the Hermes. It may also just be dirty or have some corrosion on it. If you want to clean it use a cotton bud and some isopropyl alcohol (surgical spirits). DON'T USE METHYLATED SPIRITS... It leaves a residue.
Cheers...
sir...
im just wondering if my mini sd is busted and it has no use anymore..
why can my camera still recognize that there is still a memory card installed in to my unit that its even asking me to either save the picture's towards my unit or mmc
im just wondering if it can still be recognized by my unit can i still fix it/format it so that i could use it again...??
i know your the expert on this that's why i thought of asking you this..
thanks for reading my msg'
I like to look at things step by step
1. SD card isn't recognised by Hermes - not even detected...
2. Camera detects it - did you try taking a few pictures and seeing if it actually wrote them to the card? I had a phone that registered the card but kept throwing up "sd card corrupt" every time I tried to use it.
3. Does a PC recognise the sd card when inserted into a card reader? If you don't have 1 I'd make this a priority to get, a friend of mine bought one off ebay for $5 AUD including postage...
If the pc recognises it maybe you should reformat it fat32. remember to backup any data first...
4. If the pc and camera have no problem then I'd start suspecting the Hermes... I have two sd cards so I have no problems testing but you may need to either get a smaller card - I use a 512 for flashing the os, or find someone who can lend you theirs to test. If the 2nd card reads then either the card is bung or the Hermes has a problem with it (incompatibility has been known to happen). Clean the card reader as best you can with isopropyl alcohol and a piece of cloth. There may be some type of corrosion or dust on the sd card reader contacts.
These are the steps I have taken to work out if the sd card or Hermes is a fault. Generally I find its the card (happened once to me and once to a friend).
Hope this helps...
Cheers...
Been through this. Very recently, actually. Like, last night.
I don't have a microSD reader and I found myself needing to reformat my microSD in my Hermes to FAT32. I was trying to do SD flashes. Long story.
Anyway, know what I did? I used WM5torage. As long as your ROM is functional and your SD card isn't wasted, activate WM5torage and have WinXP format your "USB Mass Storage Device" for you through My Computer. It only affects the SD card.
I mean, it worked for me.
sd 2gb
i have i sd 2gb card, my pc can see it and use it but only on fat format. i cant format fat32, i get an error(not able to complete). i cant see or use it at all on my phone. (the only selection i have to format (on my pc) is fat,fat32, default unit size)
please help, so i can use the card on my pc and phone
edit:i have searched and the only thing i saw was prog. to format sd, that prog let my pc to see the card, but lost the ability to see it in my phone. (sorry i dont remember what the prog was)
A very good (shareware) 3rd party programm comes from softwinter (storage tools)
rgs
If the PC picks it up, right click on the sd card and select format. Make sure its fat32 though. Easiest thing to do... NO 3rd party apps needed...
i guess i wasnt clear enough. my pc comes up with an error "not able to compleate" when i try to format my card in fat32 (that is when it is in my pc), but i can format fat (but thats no help for me). if i put the card in my device, it doesnt see it, so if i link my device to pc, pc doesnt see the card. so still cant format via pc.
i tried 3rd party as noted, as i thought, if my device cant see it the app cant see it.
thanks for trying, but still in the same boat.
it is a new card too, im woundering if i bought a bum card and i should return it for a new.
any suggestions welcome
Reboot pc then try again... I've had this happen too and a reboot seemed to fix the problem. Just a psychotic computer problem...Sometimes pcs can be..... TROUBLE..
Cheers...
i tried that again, still doesnt work. but i did see autoplay run this time, i think that may be my prob.. 2 progs. trying 2 run on the same source at the same time. now trying to find a way 2 shut it off (like i really need it anyway)

missing files on micro SDHC after transfer

Hi, i have my HTC hero rooted with the last Villainrom 12.0.0, i recently bought a new micro sd card 32gb and i dont know why but after i transfer data to my sd card i can see it, taste it, use it with no problems, but when i put the sd card into my phone some files get missing, i dont know why, but they just dissapear, may get into some kind of trash folder hidden into the card, but they are just gone...
i tried eather mounting the sd from my phone trough USB and retrieving the card from the phone and pluging it into the sd card reader in my pc, it doesnt matter, the problem stays.
i thougt may be it was some problem with the partition, i had the partition to use apps2sd, ext3 and all the crap, but the issue was still there, then i formatted in my pc fat32, still the problem, and finally formatted trough my phone fat32 and the problem persists, i dont know if maybe some software on my phone is making this happen or anything...
i dont know what to think, i know my sd card is ok becouse i used it filled with data and had no problems before...
please help me.... im gonna cry
I have exactly the same problem with my HD2... trying to upgrade from 8bg micro SD to 2gb micro SD.... everything copies across (or so it seems) however all the files in the 'program files' folder haven't come across, nor has my TOMTOM gps folder files..... ?
I've tried everything I can think of, why can I not copy card to card via my PC.... I'm sure it was simple when I changed from 2gb to 8gb cards.
Any help very much appreciated.

SD Card won't mount

I've looked at the other threads on this but, none seem to match my problem.
I've a 16 GB MicroSD card in my S2. S2 is not-rooted running stock ROM.
This card used to mount ok. It no longer will.
In Settings->Storage, space reported is unavailable (because it's not mounted).
I can run Format SD Card option which returns quickly.
Running Mount SD Card, it's says Mount in Progress but it never completes.
If I put the card into an SD card reader, it looks fine. FAT32 formatted card, with approx 16GB available.
Any ideas?
PeteW said:
I've looked at the other threads on this but, none seem to match my problem.
I've a 16 GB MicroSD card in my S2. S2 is not-rooted running stock ROM.
This card used to mount ok. It no longer will.
In Settings->Storage, space reported is unavailable (because it's not mounted).
I can run Format SD Card option which returns quickly.
Running Mount SD Card, it's says Mount in Progress but it never completes.
If I put the card into an SD card reader, it looks fine. FAT32 formatted card, with approx 16GB available.
Any ideas?
Click to expand...
Click to collapse
I had similar problems with two other sd cards.
First running without any problem, and then suddenly the message appeared that the sd card is empty or not connected.
In both cases, the sd card was broken.
But in my cases, the sd card could not be used in a USB adapter by PC either.
As the sd cards were nearly new, I could make a warranty replacement and now I have got a card which works fine for about two months.
You can check this, by switching the sd card into another phone.
And use another sd card in your phone.
If the other card will work in your phone and your sd card will have issues in the other phone too, replace the broken sd card.
Good luck !
P.S.: You should format the sd card with your phone and not by your PC.
Other MicroSD Card works
It_ler said:
You can check this, by switching the sd card into another phone.
And use another sd card in your phone.
If the other card will work in your phone and your sd card will have issues in the other phone too, replace the broken sd card.
P.S.: You should format the sd card with your phone and not by your PC.
Click to expand...
Click to collapse
Thanks for the response. I should have said that another 4GB card worked in the phone ok. This did lead me to think it was a card problem. However, he fact it works via a PC indicates otherwise.
Will try it in another phone.
Just throw it away?
Has anyone seen this before i.e. not working in phone but ok in SD reader?
If so, did you manage to resurrect it? Or is it time to throw it out?
PeteW said:
Has anyone seen this before i.e. not working in phone but ok in SD reader?
If so, did you manage to resurrect it? Or is it time to throw it out?
Click to expand...
Click to collapse
Try this. Settings>Application>Development
Check usb debugging.
Connect phone to pc. In notification bar click "usb connected" message, and click on "connect usb storage" button. You won't see the sd card mounted in pc!
Now disconnect phone, reboot. It might mount
See if there's any luck.
Since you're not rooted, solutions are quite limited in numbers
droidphile said:
Try this. Settings>Application>Development
Check usb debugging.
Connect phone to pc. In notification bar click "usb connected" message, and click on "connect usb storage" button. You won't see the sd card mounted in pc!
Now disconnect phone, reboot. It might mount
See if there's any luck.
Since you're not rooted, solutions are quite limited in numbers
Click to expand...
Click to collapse
Tried disconnecting and rebooting in 2 senses of the word
1. Hitting the disconnect usb storage button on screen
2. unplugging the usb cable.
Unfortunately, neither worked.
i'm having this problem now both on internal and external sdcard... it wont even mount on recovery... i'll try see if i can this done.. Windows damages everything.. i made a cleanup of the sdcard and a format..

[Q] MicroSD card issue

Hello there,
I just bought a 32GB Class 10 Samsung MicroSD card.
After inserting it, I made sure the phone sees it, and the computer sees it.
So I started transfering files to it...
Every time I try to transfer files to it, the cards sort of unmount, the computer stops seeing the External/Internal storage drivers info (0/0 KB and no files).
I realized I might be needing to format it, so I went to recovery and formatted the external card. Still no good...
If I don't try to transfer files, the internal sd card still works fine.
Am I formatting it wrong? or some other issue? Did I buy a faulty card?
Thanks!
P.S. Some info incase needed:
Using Galaxy S2 obviously, Resurrection Remix ICS 4.04
My PC is running XP SP3
[edit]
Added some pictures to demonstrate what I mean.
Pic 1: Before copy and after I get an error (pic 2) what my PC shows me
http://i45.tinypic.com/34fxkxl.jpg
Pic 2: The error I get, doesn't mean much except that the pc doesn't recognize the storage device, but just for the heck of it.
http://i49.tinypic.com/2ryhpgj.jpg
PoOoZaQ said:
Hello there,
I just bought a 32GB Class 10 Samsung MicroSD card.
After inserting it, I made sure the phone sees it, and the computer sees it.
So I started transfering files to it...
Every time I try to transfer files to it, the cards sort of unmount, the computer stops seeing the External/Internal storage drivers info (0/0 KB and no files).
I realized I might be needing to format it, so I went to recovery and formatted the external card. Still no good...
If I don't try to transfer files, the internal sd card still works fine.
Am I formatting it wrong? or some other issue? Did I buy a faulty card?
Thanks!
P.S. Some info incase needed:
Using Galaxy S2 obviously, Resurrection Remix ICS 4.04
My PC is running XP SP3
[edit]
Added some pictures to demonstrate what I mean.
Pic 1: Before copy and after I get an error (pic 2) what my PC shows me
http://i45.tinypic.com/34fxkxl.jpg
Pic 2: The error I get, doesn't mean much except that the pc doesn't recognize the storage device, but just for the heck of it.
http://i49.tinypic.com/2ryhpgj.jpg
Click to expand...
Click to collapse
try formating ur memory card and retry
PoOoZaQ said:
Am I formatting it wrong? or some other issue? Did I buy a faulty card?
Click to expand...
Click to collapse
If unsure about the quality of your SD card google for h2testw. It is a Windows test software you can use to test your SD card.
Tried formatting it... still no good.
And h2test tries to copy a file repeatedly and after some time it also gets stuck like I do manually...
I was running into the exact same issue as you with an SD card awhile back. Tried many, if not all of the suggestions listed here. Sometimes, the cards just die on you, especially at the most inopportune times...
Sent from my DROID RAZR using Tapatalk 2
Open CMD
Type format [letter_of_external_card]: /x
ex.
format E: /x
and wait.
Then format again (through Windows Explorer) with this settings:
FAT32
default allocation size
fast formatting checked
and share the results.
PoOoZaQ said:
Tried formatting it... still no good.
And h2test tries to copy a file repeatedly and after some time it also gets stuck like I do manually...
Click to expand...
Click to collapse
Failure of h2test is normally due to defective hardware.
For SD cards I do not really know but when it comes to USB sticks there are many around that are just cheap crap. You could for instance buy a 8GB stick that will happily accept 8GB of data but only store 4-6GB!. This is where h2test comes into play: it will not only write but also read and therefore check if the data written was really stored in the flash.
PoOoZaQ said:
Hello there,
I just bought a 32GB Class 10 Samsung MicroSD card.
Click to expand...
Click to collapse
Class 10? That card might be just too fast for your hardware.
I'm using Sandisk 32GB Class 4 and never had any problems.
I have tried some Class 6 and Class 8 cards with very various results.
Only class 8 card I found correctly working in my device was Memorex, but it was only 4GB.
So I gave up on fast cards...
its fake or corrupt,did you buy the samsung off a retailer , you always test flash with h2testw before you use it, speed is not the issue,i got a class 10 32gb i had many 16,256,4gb fakes, only 3.7 gb usable droped down to 1kb write then windows couldnt read the storage so you reformat again.

SD card problem

Hi guys im having a bit of drama with my sd card and my samsung galaxy tab a 10.1 running android 7.0 unrooted
I first noticed this yesterday as utorrent kept throwing me an error during my download, when i selected the sd card as the download location i noticed it said app data then once i changed the location to internal app data things worked fine.
I tried to delete the failed download but a little error message came up unable to delete so i formated my sd card and it asked for me to select a file to allow write function, i moved my downloads over to the sd card then continued with another download. utorrent has again failed halfway through then upon looking it has actually wiped my sd card completely nothing shows up but apparently i have used 2.8gb but theres no files.
ive been looking around and ive been seeing bits about sd write function being removed after kitkat but i cant seem to find anything about my sd card being wiped or why i cant delete files. Please could someone help me understand whats what or point me in the direction of a thread that explains all this.
thanks in advance
bones10187 said:
Hi guys im having a bit of drama with my sd card and my samsung galaxy tab a 10.1 running android 7.0 unrooted
I first noticed this yesterday as utorrent kept throwing me an error during my download, when i selected the sd card as the download location i noticed it said app data then once i changed the location to internal app data things worked fine.
I tried to delete the failed download but a little error message came up unable to delete so i formated my sd card and it asked for me to select a file to allow write function, i moved my downloads over to the sd card then continued with another download. utorrent has again failed halfway through then upon looking it has actually wiped my sd card completely nothing shows up but apparently i have used 2.8gb but theres no files.
ive been looking around and ive been seeing bits about sd write function being removed after kitkat but i cant seem to find anything about my sd card being wiped or why i cant delete files. Please could someone help me understand whats what or point me in the direction of a thread that explains all this.
thanks in advance
Click to expand...
Click to collapse
E.g. SanDisk forces some of their usb pen drives into a permanent read-only state when the pen drive detects that it is damaged. Once this happens, this cannot be undone. It is a mechanism to try to save the data. Perhaps your sd card is damaged and something similiar occured? It sounds like a broken/damaged sd card. If you don't need the data on the sd card, you may try to format the sd card with your pc and then again format it with your mobile device. If this fails, it is likely that the sd card is damaged.
Paul2017 said:
E.g. SanDisk forces some of their usb pen drives into a permanent read-only state when the pen drive detects that it is damaged. Once this happens, this cannot be undone. It is a mechanism to try to save the data. Perhaps your sd card is damaged and something similiar occured? It sounds like a broken/damaged sd card. If you don't need the data on the sd card, you may try to format the sd card with your pc and then again format it with your mobile device. If this fails, it is likely that the sd card is damaged.
Click to expand...
Click to collapse
Thanks for the reply but tbh ive been really busy getting bits sorted for my holiday i forgot to update my post, turns out its the sd reader in the tablet at fault which is a bit annoying as its the 1st time ive used it in the 8 months ive owned the tablet. Its the 2nd fault to develop with the tablet 1st fault was unresponsive touch screen tight out the box that was repaired now i need to wait until i return from my holiday to have the reader fixed, luckily an OTG and sd reader works like a charm.

Categories

Resources