I just recently finished porting and compiling the gummy rom from source to the motorola defy but i can't get it to boot probably ... i can boot it through 2nd boot but i get an android.process.com error
Logcat - [email protected]:~$ adb logcat
- waiting for device -
--------- beginning of /dev/log/main
I/ARMAssembler( 1117): generated scanline__00000077:03545405_00000000_00000000 [ 36 ipp] (50 ins) at [0x409e21e8:0x409e22b0] in 183106 ns
I/ARMAssembler( 1117): generated scanline__00000077:03545405_00000A05_00000000 [ 37 ipp] (58 ins) at [0x409e22b8:0x409e23a0] in 152588 ns
I/ARMAssembler( 1117): generated scanline__00000077:03545405_00000A08_00000000 [ 37 ipp] (59 ins) at [0x409e23a8:0x409e2494] in 183105 ns
I/init ( 1996): == init.rc: on init -----------------------
I/init ( 1997): == mapphone: on init ----------------------
I/init ( 1998): == mapphone: on init ----------------------
I/init ( 2023): == init.rc: on fs -------------------------
I/init ( 2024): == mapphone: on fs ------------------------
I/init ( 2066): == init.rc: on post-fs --------------------
I/init ( 2067): == mapphone: on post-fs -------------------
I/init ( 2077): == init.rc: on post-fs-data ---------------
I/init ( 2078): == mapphone: on post-fs-data -------------------
I/init ( 2102): == mapphone: on early-boot ----------------
I/init ( 2103): == init.rc: on boot -----------------------
I/run-parts( 2106): kernel.sched_latency_ns = 10000000
I/run-parts( 2106): kernel.sched_min_granularity_ns = 1000000
I/run-parts( 2106): vm.dirty_ratio = 0
I/run-parts( 2106): vm.dirty_background_ratio = 5
I/run-parts( 2106): vm.vfs_cache_pressure = 100
I/run-parts( 2106): vm.oom_kill_allocating_task = 1
I/run-parts( 2106): vm.min_free_kbytes = 4096
D/AndroidRuntime( 2123):
D/AndroidRuntime( 2123): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<<
D/AndroidRuntime( 2123): CheckJNI is OFF
E/dalvikvm( 2123): ERROR: must specify non-'.' bootclasspath
W/dalvikvm( 2123): CreateJavaVM failed: dvmClassStartup failed
E/AndroidRuntime( 2123): JNI_CreateJavaVM failed
I/run-parts( 2106): Zipaligning...
I/run-parts( 2106): Zipalign complete! Runtime: 00:00:01
I/run-parts( 2106): kernel.sched_latency_ns = 10000000
I/run-parts( 2106): kernel.sched_min_granularity_ns = 1000000
I/run-parts( 2106): vm.dirty_ratio = 0
I/run-parts( 2106): vm.dirty_background_ratio = 5
I/run-parts( 2106): vm.vfs_cache_pressure = 100
I/run-parts( 2106): vm.oom_kill_allocating_task = 1
I/run-parts( 2106): vm.min_free_kbytes = 4096
I/boot ( 2163): Set 32mb of RAM free.
I/mountsd ( 2167): Checking filesystems..
I/run-parts( 2106): e2fsck 1.41.11 (14-Mar-2010)
I/run-parts( 2106): /dev/block/mmcblk0p2: recovering journal
I/run-parts( 2106): /dev/block/mmcblk0p2: clean, 11/124928 files, 26309/498900 blocks
Can anyone help me please???
Thanks
Related
Hey all, I have this rom running on my photon, and can not get netflix to work. log cat shows -
E/OMXNodeInstance( 1419): OMX_GetExtensionIndex failed
E/OMXNodeInstance( 1419): OMX_GetExtensionIndex failed
W/ ( 1419): Warning message AMessage(what = 'omx ', target = 384) = {
W/ ( 1419): int32_t type = 0
W/ ( 1419): void *node = 0x161
W/ ( 1419): int32_t event = 3
W/ ( 1419): int32_t data1 = 1
W/ ( 1419): int32_t data2 = 117440527
W/ ( 1419): } unhandled in root state.
Any idea how to fix?
Somehow last night my phone (Galaxy S4 running AOSP 4.4.2) crashed and now it wont reboot. It just sticks on the screen with the four colours animation for ever. I tried deleting the Cache, and Davilik Cache but it has not fixed the problem .. after this is went through the Upgrading Android process for all the apps but then stuck on "Starting Apps" .. so pretty clearly some application is starting and has a problem and so my phone wont boot .. but is there anyway of finding out which application it is?? Im aware I can wipe data and start again but would like to solve the problem without this if its possible. I also tried re-flashing my ROM but it didnt help.
Thanks for any help in advance.
If it helps anybody help me, I plugged my phone into usb while it is stuck in the bootloop and ran
adb logcat *:E .. here is the result
--------- beginning of /dev/log/system
--------- beginning of /dev/log/main
E/DataRouter( 198): USB Interface is open with 0x9
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 1 of 10
E/macloader( 210): CID info file will be created!!!
E/wcnss_service( 221): CAL file not found
E/wcnss_service( 221): Failed to open wcnss device : No such file or directory
E/mm-camera( 211): qcamsvr_start: old_mode = 3f
E/INSTHK ( 249): Checked...
E/PPDaemon( 217): Failed to open the config file!
E/PPDaemon( 217): Panel type: 8
E/rmt_storage( 223): Remote storage service is not supported on mdm target
E/AT_Distributor( 212): Failed to init ATD
E/mm-camera( 211): qcamsvr_load_gesture_lib Error opening gesture library
E/mm-camera( 211): Cannot init Gesture library
E/mm-camera( 211): camera_plugin_create_func: handle = 0xb6c10008, client_open_fn = 0xb6c0d565, destroy_fn = 0xb6c0db99
E/QC-time-services( 220): Daemon:genoff_boot_tod_init: Unable to set TOD at boot up
E/QC-time-services( 220): Daemon: Unable to set TOD at boot up
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/Diag_Lib( 195): Diag_LSM_Init: Failed to open handle to diag driver, error = 13
E/QCNEA ( 214): CnE Standard Version 4.01
E/QCNEA ( 214): CnE Pro Version 1.01
E/QCNEA ( 214): Cne WQE Version 0.1
E/QCNEA ( 214): Cne NSRM Version 1.01
E/Sensorhubs( 207): couldn't find 'ssp_context' input device
E/Sensorhubs( 207): SSPContext: open sensorhub device failed(-1)
E/PRDrmPlugIn( 202): PRDrmPlugin:RDrmPlugin
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::create
E/PRDrmPlugInImp( 202): PRDRMPluginAPI::SetEventHandler
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 2 of 10
E/PRDrmPlugIn( 202): PRDrmPlugin:nGetSupportInfo, uniqueId = 0
E/Sensorhubs( 207): couldn't find 'gesture_sensor' input device
E/MediaPlayerFactory( 203): calling dlopen on FACTORY_LIB
E/MediaPlayerFactory( 203): calling dlsym on pFactoryLib for FACTORY_CREATE_FN
E/MediaPlayerFactory( 203): registering DASH Player factory...
E/QualcommCamera( 203): Qint android::get_number_of_cameras(): E
E/alsa_mixer( 203): Control open failed
E/ ( 203): [ACDB RTC]->rtc init done!->result [0]
E/Diag_Lib( 203): actp_diag_init: call diag init function with B50181DD
E/ ( 203): [ACDB ACPH]->actp diag init done!
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 148
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/ACDB-LOADER( 203): done with conversion, anc config size is 74
E/AndroidRuntime( 201): cannot open customer xml file
E/AndroidRuntime( 201): /system/csc/customer.xml can't open file
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 3 of 10
E/ICD ( 194): There is no file or permission.
E/BootAnimation( 613): Could not open '/sys/devices/w1_bus_master1/w1_master_check_id'
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 4 of 10
E/EmojiFactory_jni( 201): Failed to load libemoji.so: dlopen failed: library "libemoji.so" not found
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 5 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 6 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 7 of 10
E/Sensors ( 768): getName gyro_sensor name file open error.
E/GyroSensor( 768): GyroSensor : getName of gyro_sensor failed.
E/TemperatureHumiditySensor( 768): Failed to open send_accuracy sysfs
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/MagneticSensor( 768): enable, 122, data_fd = -1
E/GyroSensor( 768): enable, 148, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/TemperatureHumiditySensor( 768): enable, 216, data_fd = -1
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/Sensors ( 768): sensors__get_sensors_list gyro_sensor name file open error.
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 8 of 10
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 9 of 10
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/kickstart-qcks( 226): Couldn't find "/dev/mdm", 10 of 10
E/kickstart-qcks( 226): '/dev/mdm' was not found
E/kickstart-qcks( 226): ERROR: Can't bring MDM9K out of reset
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_ucm( 203): EC_REF_RX mixer ctl: SLIM_RX
E/alsa_mixer( 203): Control open failed
E/ ( 203): csd_client_service_init: Invalid rx device 0, setting to handset
E/ ( 203): csd_client_service_init: Invalid tx device 0, setting to handset
E/alsa_ucm( 203): Invalid current verb value: Inactive - -1
E/alsa_ucm( 203): No valid device Speaker found
E/alsa_ucm( 203): Control device not initialized
E/alsa_ucm( 203): Control device not initialized
E/alsa_pcm( 203): cannot open device '/dev/snd/pcmC0D0p', errno 2
E/ALSADevice( 203): open: Failed to initialize ALSA device 'hw:0,0'
E/AudioHardwareALSA( 203): Device open failed
E/QMI_FW ( 203): xport_open: socket creation failed - 1
E/AudioPolicyManagerBase( 203): Not output found for attached devices 00000003
E/AudioPolicyManagerBase( 203): Failed to open primary output
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/AudioPolicyManagerBase( 203): getDeviceForStrategy() speaker device not found for STRATEGY_SONIFICATION
E/Audio_Control_CSC( 203): /system/csc/sales_code.dat ==> cannot open file
E/AudioPolicyService( 203): couldn't init_check the audio policy (No such device)
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QMI_FW ( 220): QMUXD: WARNING qmi_qmux_if_pwr_up_init failed! rc=-1
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init: qmi_client_get_service_list returned -2num_services 0
E/QC-time-services( 220): Daemon:genoff_modem_qmi_init:retry count exceeds limitQMI init failed continuing withoutserver
E/QC-time-services( 220): Daemon: QMI init failed, QMI calls inactive
E/QC-time-services( 220): Daemon: Time-services: Waiting to acceptconnection
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/QMI_FW ( 203): open_lookup_sock_fd: Lookup sock fd creation failed
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=0
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=18
E/QMI_FW ( 203): QMUXD: Service_id=20 not found over conn_id=37
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_get_next_module: getSensorHubList: count= 2
E/SensorHubManager( 768): JNI: sensorhubs_enabledisable: delay= 0
E/EventHub( 768): could not get driver version for /dev/input/mice, Not a typewriter
E/ConnectivityService( 768): Error in networkAttributes - ignoring attempt to define type 17
E/ConnectivityService( 768): Ignoring protectedNetwork 14
E/MobileDataStateTracker( 768): default: Ignoring feature request because could not acquire PhoneService
E/MobileDataStateTracker( 768): default: Could not enable APN type "default"
F/SystemServer( 768): BOOT FAILURE Creating Connectivity Engine Service
F/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
F/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
F/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
F/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
F/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
F/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
F/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
F/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
F/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/SystemServer( 768): Failed to load CNE class
E/SystemServer( 768): java.lang.ClassNotFoundException: Didn't find class "com.quicinc.cne.CNE" on path: DexPathList[[],nativeLibraryDirectories=[/vendor/lib, /system/lib]]
E/SystemServer( 768): at dalvik.system.BaseDexClassLoader.findClass(BaseDexClassLoader.java:56)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:497)
E/SystemServer( 768): at java.lang.ClassLoader.loadClass(ClassLoader.java:457)
E/SystemServer( 768): at com.android.server.ServerThread.initAndLoop(SystemServer.java:572)
E/SystemServer( 768): at com.android.server.SystemServer.main(SystemServer.java:1263)
E/SystemServer( 768): at java.lang.reflect.Method.invokeNative(Native Method)
E/SystemServer( 768): at java.lang.reflect.Method.invoke(Method.java:515)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:1264)
E/SystemServer( 768): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:1080)
E/SystemServer( 768): at dalvik.system.NativeStart.main(Native Method)
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/WifiStateMachine( 768): Unexpected BatchedScanResults :null
E/wpa_supplicant( 1981): wpa_driver_nl80211_driver_cmd: failed to issue private commands
E/ActivityManager( 768): Attempt to launch receivers of broadcast intent Intent { act=android.net.ConnectivityService.action.PKT_CNT_SAMPLE_INTERVAL_ELAPSED flg=0x4 (has extras) } before boot completion
Hello, here is my problem,
I have always ported the miui rom to my thl w200 device.
in the latest builds, after porting it to my phone I get stuck at bootlogo.
I did a logcat but cant really find what causes this.
someone can look at it and help me?
--------- beginning of /dev/log/main
I/Resize ( 86): The size of data already meet the request.
I/Resize ( 86): Partition has been resized,so nothing to do!
D/ADB_SERVICES( 158): install_listener('tcp:5037','*smartsocket*')
D/ADB_SERVICES( 158): adb_main(): pre init_jdwp()
D/ADB_SERVICES( 158): adb_main(): post init_jdwp()
D/ADB_SERVICES( 158): Event loop starting
D/ADB_SERVICES( 158): transport: 0xf67520 init'ing for usb_handle 0xf67498 (sn='')
I/ADB_SERVICES( 158): transport: usb
D/ADB_SERVICES( 158): transport: (null) registered
D/ADB_SERVICES( 158): transport: (null) (16,17) starting
W/ADB_SERVICES( 158): (null): starting transport input thread, reading from fd 17
W/ADB_SERVICES( 158): (null): starting transport output thread on fd 17, SYNC online (2)
D/ADB_SERVICES( 158): recv: SYNC 00000001 00000002 0000
W/ADB_SERVICES( 158): (null): transport SYNC online
E/ccci_mdinit(0)( 121): md_init ver:1.00
E/ccci_mdinit(0)( 120): md_init ver:1.00
I/6620_launcher( 117): open device node succeed.(Node:/dev/stpwmt, fd:3)
I/6620_launcher( 117): keypersist.mtk.wcn.combo.chipid)-value0x6628),chipId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): chiId:0x6628
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): set chipId(0x6628) to HIF-SDIO module
I/6620_launcher( 117): Info:key:mt6620.defAnt value:mt6620_ant_m3.cfg
I/6620_launcher( 117): Info:key:mt6628.defAnt value:mt6628_ant_m1.cfg
I/6620_launcher( 117): NULL is returned, eighter EOF or error maybe found
I/6620_launcher( 117): close /system/etc/firmware/WMT.cfg succeed
I/6620_launcher( 117): index:1, chipId:0x6628
I/6620_launcher( 117): STP Mode is not set, fetching default mode...
I/6620_launcher( 117): chipId(0x6628), default Mode(1), strlen(gWmtCfgName)(39), wmtCfgFile(/system/etc/firmware//mt6628_ant_m1.cfg)
I/6620_launcher( 117): HifConfig:0x0001, wmtCfgFile:/system/etc/firmware//mt6628_ant_m1.cfg
I/6620_launcher( 117): keyro.build.type)-valueuser)
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): MCU patch folder path: /system/etc/firmware/
I/6620_launcher( 117): Common Interface: UART mode
I/6620_launcher( 117): uart name ttyMT2
D/MsensorDaemon( 151): Msensor deamon statr!!!!!!!!!!!!
D/MsensorDaemon( 151): msensor demon start process detect demon name = memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): msensor demon start process detect demon prop = init.svc.memsicd3416x
D/MsensorDaemon( 151):
D/MsensorDaemon( 151): start_msensor_demon
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
E/MsensorDaemon( 151): [99] ''
D/permission_check( 145): permission check ver:0.01
D/permission_check( 145): Empty, not decrypt!
D/permission_check( 145): change_md_nvram_attr++
--------- beginning of /dev/log/system
E/POAD ( 155): boot_mode = 0
E/POAD ( 155): update boot reason = 0
D/permission_check( 145): new_ver file exist!!!
D/permission_check( 145): change_md_nvram_attr--0
I/stp_dump( 143): ==>main
I/stp_dump( 143): stp_dump_ctrl_iface_trace_logger_sendto_fd succeed
E/stp_dump( 143): [STP_DBG] family id = 19
I/stp_dump( 143): sending dummy command
I/stp_dump( 143): set sock number to 9
I/stp_dump( 143): addr.sun_path:stp_DIR=/data/misc/stp_dump GROUP=stp
I/stp_dump( 143): Using existing control interface directory.
E/stp_dump( 143): mkdir (/data/misc/stp_dump) succeed
I/stp_dump( 143): ctrl_interface_group=1000 (from group name 'stp')
I/stp_dump( 143): chown (/data/misc/stp_dump) succeed
I/stp_dump( 143): CTRL: chmod[/data/misc/stp_dump] succeed
E/stp_dump( 143): ctrl_iface bind(PF_UNIX) failed: Address already in use
E/stp_dump( 143): ctrl_iface exists, but does not allow connections - assuming it was leftover from forced program termination
D/stp_dump( 143): Successfully replaced leftover ctrl_iface socket '/data/misc/stp_dump/stpd'
I/stp_dump( 143): set sock number to 10
I/stp_dump( 143): stp_dump_ctrl_iface_init succeed.
I/stp_dump( 143): ==>main222
I/busybox ( 114): run-parts: /system/etc/init.d: No such file or directory
D/wlanLoader( 144): checkSupport 0x6628
D/wlanLoader( 144): Match 0x6628
D/wlanLoader( 144): Get the correct chip version mt6628
D/wlanLoader( 144): Get chip Version mt6628.
D/wlanLoader( 144): DRIVER_MODULE_PATH is /system/lib/modules/wlan_mt6628.ko
D/MsensorDaemon( 151): HAVE_LIBC_SYSTEM_PROPERTIES
D/MsensorDaemon( 151): memsicd3416x running
D/MsensorDaemon( 151): Msensor deamon2 statr!!!!!!!!!!!!
D/MsensorDaemon( 151): open demon attr err = No such file or directory
E/stp_dump( 143): table == NULL || table->table == NULL
E/stp_dump( 143): table == NULL || table->table == NULL
D/wlanLoader( 144): Success to insmod the /system/lib/modules/wlan_mt6628.ko
I/thermal_repeater( 154): START+++++++++ 154
I/thermal_repeater( 154): Success to write 154 to /proc/wmt_tm/tm_pid
I/thermal_repeater( 154): Fail to chmod ffffffff
I/thermal_repeater( 154): Enter infinite loop
I/AEE/AED ( 122): Built Jan 30 2013 19:35:15
D/AEE/AED ( 122): ChangeAEEWorkMode: 3
I/AEE/AED ( 122): AED config
I/AEE/AED ( 122): mode '3'
I/AEE/AED ( 122): exp level '1
I/AEE/AED ( 122): dal enable '0'
I/AEE/AED ( 122): db count '20'
I/AEE/AED ( 122): db storage '1'
I/AEE/AED ( 122): SMP Info => 1
I/MobileLogD( 123): [void change_permission()] set mobile_log_d is in root user, adjust caps for its thread
I/MobileLogD( 123): mobilelog start after boot, mode:0
D/MobileLogD/cache( 123): init cache configure items....
D/MobileLogD/cache( 123): value of ro.build.type:user.
I/installd( 140): installd firing up
D/PQ ( 130): PQ init start...
D/PQ ( 130): PQ test...
I/ ( 137): ServiceManager: 0x41661698
D/PQ ( 130): PQ init end !
E/AEE/LIBAEE( 122): Can't remove file /sdcard/mtklog/aee_exp/temp: No such file or directory
E/AEE/LIBAEE( 122): Can't remove file /data/aee_exp/temp: No such file or directory
V/AEE/AED ( 122): ETB buffer length = 512
I/AEE/AED ( 122): wdt_status = 2, fiq_step=0
I/AEE/AED ( 122): reboot_reason = 0
V/AEE/AED ( 122): ETM start
D/installd( 140): LBE is enabled, starting...
D/NVRAM ( 152): NvRAMAgent created
E/NVRAM ( 152): Haman, serviceManager work well
D/NVRAM ( 152): NvRAMAgent Service is now ready
I/DPFD ( 149): [DPFD] main start ...
I/DPFD ( 149): [DPFD] set priority to RR:268435540
I/DPFD ( 149): [int adjustPriority()] set dpfd is in root user, adjust caps for its thread
D/DPFD ( 149): [DPFD] Wait Request.....
I/DMAgent ( 147): DMAgent created
I/DMAgent ( 147): [DMAgent]register OK.
D/DMAgent ( 147): DMAgent Service is now ready
D/MobileLogD( 123): write "mobilelog start after boot, mode:0" to mblog
E/installd( 140): Failed to load liblbesec.so
I/installd( 140): add service shelld success!
W/installd( 140): service start entry 'shelld', flag :0
W/installd( 140): starting 'shelld'
E/ccci_fsd(0)( 118): md_fsd Ver:v1.00
I/Hald ( 133): Hald 1.1011 starting
D/ccci_fsd(1)( 118): /dev/ccci_fs is opend(600).
D/ccci_fsd(1)( 118): Check OTP...
D/Hald ( 133): Create ResetManager
D/Hald ( 133): Size of initial message: 6
D/Hald ( 133): [MTK_WIFI] family id = 20
D/Hald ( 133): Reset Manager Prepare Dummy command
D/Hald ( 133): Reset Manager Send Command for binding
D/Hald ( 133): Start ResetManager
E/ccci_fsd(0)( 119): md_fsd Ver:v1.00
E/ccci_fsd(2)( 119): /dev/ccci2_fs is not enabled(2).
D/MobileLogD/cache( 123): config autostart=0 same as current value
D/MobileLogD/cache( 123): config logpath=/mnt/sdcard same as current value
D/MobileLogD/cache( 123): config logsize=300 same as current value
D/MobileLogD/cache( 123): config AndroidLog=1 same as current value
D/MobileLogD/cache( 123): config KernelLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
D/MobileLogD/cache( 123): config BTLog=1 same as current value
E/MobileLogD/cache( 123): cant get true log path through property
E/MobileLogD/cache( 123): true path is /mnt/sdcard
D/MobileLogD( 123): create local socket server success
D/Vold ( 116): Check whether nvram restore ready!
D/NVRAM ( 128): g_i4CFG_File_Count: 25
D/NVRAM ( 128): NVM_Init Max Lid: 43
D/NVRAM ( 128): Total nvram Lid number is 43
I/Netd ( 125): Netd 1.0 starting
W/InterfaceController( 125): Warning (Cannot load library: load_library(linker.cpp:745): library "/system/lib/libnetcmdiface.so" not found) while opening the net interface command library
D/agps ( 142): [agps] WARNING: [Main] mtk_agpsd is running ver=0.46
D/agps ( 142): [agps] WARNING: [Main] mkdir failure for /data/agps_supl/log reason=[File exists]
D/MtkAgpsNative( 142): SuplRawLog.bEnable:0
D/MtkAgpsNative( 142): SuplRawLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplRawLog.szFile:agps_raw.log
D/MtkAgpsNative( 142): SuplSslLog.bEnable:0
D/MtkAgpsNative( 142): SuplSslLog.szPath:/sdcard
D/MtkAgpsNative( 142): SuplSslLog.szFile:agps_ssl.log
I/MtkAgpsNative( 142): Enter up_int_init
I/MtkAgpsNative( 142): Enter mtk_agps_up_init
D/MtkAgpsNative( 142): FS_CreateDir: /data/agps_supl
W/MtkAgpsNative( 142): -> errno(EEXIST) => dir already exists
D/MtkAgpsNative( 142): ############ mtk_agps_up_init --> agps_disable_enalbe_times = 1 ############
Click to expand...
Click to collapse
I think my i9100 (16 GB model) has a serious KitKat addiction issue...
I've tried to switch from SlimSaber 4.4.4 to a 5.1 ROM and the phone just gets stuck on the first boot. Since I can't access the logcats on the first boot i don't know what is causing the phone to get stuck.
Here's what i tried and came up with the same result:
- From a KitKat ROM -> Flash a 5.0.4 one with a full wipe before and /system format, or just a data / cache / dalvik wipe
- From various TWRP / CWM KitKat Recovery -> FULL format on ALL partitions on the phone (sdcard included) -> Flash 5.0.4 / 5.1
- From a KitKat ROM -> Flash a 5.1 one with a /system format before and a data / cache / dalvik wipe after
- From various TWRP / CWM KitKat / Lollipop Recovery -> Flash a 5.0.4/5.1 one with data / cache / dalvik wipe before and / or after
Note: Some of the flashing tries were ROM only, others were ROM + Gapps (and + SuperSU in some cases).
Basically I've tried many combinations of flashing and the freaky phone just hangs on first boot (and yes I've waited more than 20 minutes for the phone to boot and it doesn't pass the animation screen).
However... If I flash any KitKat ROM the phone boots perfectly fine!
I'd appreciate any help solving this issue as I don't know any KitKat Annonymous Android Addicts Association in my area
I got this log on a first boot logcat-enabled ROM:
Code:
--------- beginning of main
I/lowmemorykiller( 1860): Using in-kernel low memory killer interface
W/auditd ( 1858): type=2000 audit(0.0:1): initialized
I/auditd ( 1858): type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
W/auditd ( 1858): type=1404 audit(0.0:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
W/vold ( 1862): type=1400 audit(0.0:4): avc: denied { search } for name="/" dev=mmcblk0p1 ino=2 scontext=u:r:vold:s0 tcontext=u:object_r:efs_file:s0 tclass=dir
--------- beginning of system
I/Vold ( 1862): Vold 2.1 (the revenge) firing up
D/Vold ( 1862): Volume sdcard0 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 1862): Volume sdcard1 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 1862): Volume usbdisk0 state changing -1 (Initializing) -> 0 (No-Media)
I/Cryptfs ( 1862): Check if PFE is activated on Boot
E/Cryptfs ( 1862): Cannot open footer file /efs/metadata for get
E/Cryptfs ( 1862): Error getting crypt footer and key
D/Vold ( 1862): Volume sdcard0 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 1, PARTN 1
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 2, PARTN 2
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 3, PARTN 3
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 4, PARTN 4
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 5, PARTN 5
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 6, PARTN 6
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 7, PARTN 7
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 0, PARTN 8
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p8' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 1, PARTN 9
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p9' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 2, PARTN 10
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p10' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 3, PARTN 11
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p11' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 4, PARTN 12
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p12' has a different major than its disk!
D/Vold ( 1862): Volume sdcard0 state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/Vold ( 1862): Volume sdcard1 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 9, PARTN 1
D/Vold ( 1862): Volume sdcard1 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/slim ( 1917): Welcome to Android 5.1.1 / SlimKat Slim-5.1.1.alpha.0.1-UNOFFICIAL-20150509-0944
I/SurfaceFlinger( 1863): SurfaceFlinger is starting
I/SurfaceFlinger( 1863): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 1863): loaded /system/lib/egl/libEGL_mali.so
I/run-parts( 1869): /data/system: No such file or directory
D/libEGL ( 1863): loaded /system/lib/egl/libGLESv1_CM_mali.so
W/ls ( 1935): type=1400 audit(0.0:5): avc: denied { search } for name="wifi" dev=mmcblk0p10 ino=16399 scontext=u:r:sysinit:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir
I/run-parts( 1869): /data/misc/wifi/wpa_supplicant.conf: Permission denied
I/SELinuxLabel( 1937): data is unlabeled, fixing...
W/ls ( 1938): type=1400 audit(0.0:6): avc: denied { getattr } for path="/system/bin/surfaceflinger" dev=mmcblk0p9 ino=24672 scontext=u:r:sysinit:s0 tcontext=u:object_r:surfaceflinger_exec:s0 tclass=file
I/run-parts( 1869): /system/bin/surfaceflinger: Permission denied
D/libEGL ( 1863): loaded /system/lib/egl/libGLESv2_mali.so
I/run-parts( 1869): /system/priv-app/GoogleServicesFramework.apk: No such file or directory
I/SELinuxLabel( 1944): /data relabel starting...
E/ ( 1863): Device driver API match
E/ ( 1863): Device driver API version: 23
E/ ( 1863): User space API version: 23
E/ ( 1863): mali: REVISION=Linux-r3p2-01rel3 BUILD_DATE=Wed Oct 9 21:05:57 KST 2013
I/gralloc ( 1863): using (fd=14)
I/gralloc ( 1863): id = s3cfb
I/gralloc ( 1863): xres = 480 px
I/gralloc ( 1863): yres = 800 px
I/gralloc ( 1863): xres_virtual = 480 px
I/gralloc ( 1863): yres_virtual = 1600 px
I/gralloc ( 1863): bpp = 32
I/gralloc ( 1863): r = 16:8
I/gralloc ( 1863): g = 8:8
I/gralloc ( 1863): b = 0:8
I/gralloc ( 1863): width = 56 mm (217.714279 dpi)
I/gralloc ( 1863): height = 93 mm (218.494629 dpi)
I/gralloc ( 1863): refresh rate = 60.38 Hz
I/run-parts( 1869): SELinux: Loaded file_contexts from /file_contexts
I/run-parts( 1869): SELinux: Skipping restorecon_recursive(/data)
I/SurfaceFlinger( 1863): Using composer version 1.0
I/SurfaceFlinger( 1863): EGL information:
W/SurfaceFlinger( 1863): Ignoring duplicate VSYNC event from HWC (t=0)
I/SurfaceFlinger( 1863): vendor : Android
I/SurfaceFlinger( 1863): version : 1.4 Android META-EGL
I/SurfaceFlinger( 1863): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_reusable_sync EGL_KHR_fence_sync EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable
I/SurfaceFlinger( 1863): Client API: OpenGL_ES
I/SurfaceFlinger( 1863): EGLSurface: 8-8-8-8, config=0x60000014
I/SurfaceFlinger( 1863): OpenGL ES informations:
I/SurfaceFlinger( 1863): vendor : ARM
I/SurfaceFlinger( 1863): renderer : Mali-400 MP
I/SurfaceFlinger( 1863): version : OpenGL ES 2.0
I/SurfaceFlinger( 1863): extensions: GL_EXT_debug_marker GL_OES_texture_npot GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_depth24 GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_EXT_blend_minmax GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_ARM_mali_program_binary GL_EXT_shader_texture_lod GL_EXT_robustness GL_OES_depth_texture_cube_map
I/SurfaceFlinger( 1863): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 1863): GL_MAX_VIEWPORT_DIMS = 4096
E/cutils-trace( 1863): Error opening trace file: No such file or directory (2)
I/SELinuxLabel( 1948): /data relabel complete
D/SurfaceFlinger( 1863): Set power mode=2, type=0 flinger=0x40c82000
I/SELinuxLabel( 1956): /cache relabel starting...
I/run-parts( 1869): SELinux: Loaded file_contexts from /file_contexts
I/run-parts( 1869): SELinux: Skipping restorecon_recursive(/cache)
I/SELinuxLabel( 1959): /cache relabel complete
D/SurfaceFlinger( 1863): SF. shader cache generated - 26 shaders in 48.281040 ms
D/libEGL ( 1955): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 1955): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 1955): loaded /system/lib/egl/libGLESv2_mali.so
E/ ( 1955): Device driver API match
E/ ( 1955): Device driver API version: 23
E/ ( 1955): User space API version: 23
E/ ( 1955): mali: REVISION=Linux-r3p2-01rel3 BUILD_DATE=Wed Oct 9 21:05:57 KST 2013
E/cutils-trace( 1955): Error opening trace file: No such file or directory (2)
E/BootAnimation( 1955): couldn't find audio_conf.txt
W/BootAnimation( 1955): Audio service is not initiated.
D/BootAnimation( 1955): Use save memory method, maybe small fps in actual.
D/BootAnimation( 1955): Use save memory method, maybe small fps in actual.
I was having the same problem for weeks until I stumbled on this post:
http://forum.xda-developers.com/showpost.php?p=60473209&postcount=1106
Attached the PhilZ-kernel for flashing after the concerning PIT-file was flashed successfully. This kernel allows to format the Preload-partition from recovery. This is needed, that you don't stuck in a bootloop, after flashing a custom LolliPop-ROM.
Click to expand...
Click to collapse
I flashed PhilZ kernel, wiped the /pre-load, /data, /system, /cache, flashed another TWRP kernel, then finally successfully flashed cm12.1. I'm not sure why the attached PhilZ failed to flash cm12.1, perhaps the recovery is not updated.
Hope this helps.
Hi there!
Im trying to build Touchwiz Lollipop stock kernel with 4.9+ toolchain for my Samsung Galaxy J5 (2015), but it seems that it doesnt work. The phone gets stuck at phone`s logo, it is not even reaching the bootanimation.
It happened same when i tried to build CM kernel with 4.9+ toolchain.
The toolchain version im using is Linaro 4.9 by Cristopher. I also tried UBER 4.9 and some others, but still no luck.
On Marshmallow it is working fine, unlike Lollipop.
Here is a logcat: MEDIAFIRE / PASTEBIN.
Here is the stock kernel source: GITHUB.
And i think this is the problem, which is seems to loop:
Code:
E/QSEECOMAPI: ( 1252): Error::ioctl call query if app is loaded failed with ret = -1, errno = 22
D/QSEECOMAPI: ( 1252): QSEECom_get_handle sb_length = 0x2000
W/Atfwd_Sendcmd( 301): AtCmdFwd service not published, waiting... retryCnt : 5
I/ServiceManager( 930): Waiting for service SurfaceFlinger...
E/QSEECOMAPI: ( 1252): Error::ioctl call query if app is loaded failed with ret = -1, errno = 22
E/QCOMKeyMaster( 1252): Loading keymaster app /firmware/image keymaste failied with ret -6
E/keystore( 1252): could not open keymaster device in keystore (Operation not permitted)
E/keystore( 1252): keystore keymaster could not be initialized; exiting
There is also this:
Code:
E/QSEECOMAPI: ( 444): Error::Load image request failed ret = -1, errno = 512
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /system/etc/firmware/tbase.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /firmware/image/mc_v2.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /system/etc/firmware/mc_v2.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /firmware/image/mobicore12.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /system/etc/firmware/mobicore12.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
D/QSEECOMAPI: ( 444): QSEECom_load_external_elf
E/QSEECOMAPI: ( 444): Error::Cannot open the file /firmware/image/mobicore.mdt
E/QSEECOMAPI: ( 444): Error::Loading image failed with ret = -1
Also:
Code:
E/Adreno-GSL( 252): <ioctl_kgsl_driver_entry:485>: open(/dev/kgsl-3d0) failed: errno 12. Out of memory
E/Adreno-EGL( 252): <egliInitState:676>: gsl library open failure
W/Adreno-EGL( 252): <qeglDrvAPI_eglInitialize:375>: EGL_NOT_INITIALIZED
After a google search, i have understood that QSEECOM is related to encryption, but im not even using that.
Do you have any idea or tips?
Thank you!
Robert.
Hey. Have same issue on my Galaxy A3 (qseecom issue). How to fix?
vl_w said:
Hey. Have same issue on my Galaxy A3 (qseecom issue). How to fix?
Click to expand...
Click to collapse
No idea... I couldnt find anything and gave up on it.
I would like to know the solution if you manage to solve the problem...
PS: By the way, when you post in some thread, quote the post or mention the user so he gets notification.
#Henkate said:
No idea... I couldnt find anything and gave up on it.
I would like to know the solution if you manage to solve the problem...
PS: By the way, when you post in some thread, quote the post or mention the user so he gets notification.
Click to expand...
Click to collapse
4.8 - working
4.9 - phone stay on boot-animation... Logs same that in 1st post.
Google search not find solution...
I think easier will move drivers to CAF latest kernel and use it w/o any bugs