Related
Hi guys, I was trying to flash new ROM via CWM. However, cwm wasn't able to read the zip file saying something about script is not supported blah blah blah... Browsing thru xda forum, I found out that this problem has caused due to the cwm version(recently updated to cwm3.0.0.8) , or at least I want to believe it this way. So lastnight I ended up finding a thread started by jt1134 which I basically helped out lots of ppl who were struggling with similar problem as mine. But the thing is when I was trying to download the files, cwm-recovery-ALL.zip and cwm-recovery-ALL odin. The download links were broken giving me an error message. So guys, if anyone has the files I beg of you to share it pleaseeeeeeeee.
to shorten it down, the link is broken, I think. So if anyone has the files I beg of you to share it thank you..............
Hello jjalhjy
I will make this easy for the both of us!
Direct your browser to this link:http://forum.xda-developers.com/showthread.php?t=999802
Once there scroll down to the 5th post (#5) where I linked both the page you referenced (broken links) and a link to a working download of the ".tar" file (was earlier! ).
If you need the .zip file scroll down to post 9 (#9) where I have linked it.
A quick guide to getting you flashed.
*note* I am assuming you cannot use .zip files due to the incompatible script error! This is for using odin.
1. Put phone in download mode via the power menu if on superclean. If not turn off the power, pull battery, plug into computer, hold "down" on the volume rocker till the yellow triangle "download" screen appears
2. download the ".tar" version of cwr all
3. Launch odin
4. Click the PDA button and search for the ".tar" file and select it -> then hit "ok"
5. Run the file in odin, wait for the phone to reboot.
6. put your battery back in and test recovery mode to see how it looks!
*whew*
good luck!
Wow that was a fast reply! Thank you! A quick question tho, 1. Do you know if I have to uninstall ROMmanager and delete update.zip file in my sd card before I even start flashing via using odin. 2. After following your instruction step by step, and let's say if it works. Do I still need to download ROMmanager? 3. I remember reading someone's thread in xda saying it is always necessary to flash new cwm after flashing a ROM (I always have it done using ROMmanager but now things have changed, obvisouly. So yea, how would I flash new CWM after flashing a ROM from now?
Sorry if these questions sound so newbyyyy hehe and thanks again!
jjalhjy said:
1. Do you know if I have to uninstall ROMmanager and delete update.zip file in my sd card before I even start flashing via using odin.
Click to expand...
Click to collapse
It is advised (so I have read) that you should not use ROM manager with the Fascinate. While it is a powerful tool, it is just not 100% Fascinate friendly yet. Also I have never had to remove/mess with the update.zip on my SD card. Heck as far as I know you can delete it after using ODIN with the new cwr-all.
jjalhjy said:
2. After following your instruction step by step, and let's say if it works. Do I still need to download ROMmanager?
Click to expand...
Click to collapse
No. I would use the Development Thread here in the fascinate section for your ROMS. ROM manager is just not made for us.....yet!
jjalhjy said:
3. I remember reading someone's thread in xda saying it is always necessary to flash new cwm after flashing a ROM (I always have it done using ROMmanager but now things have changed, obvisouly. So yea, how would I flash new CWM after flashing a ROM from now?
Click to expand...
Click to collapse
I personally have never done this. To the best of my knowledge (and real life experience) cwr-all (red version) is the current and most up-to-date version (for the Fascinate). Once I ODIN-ed over the cwr-all I have not updated it once. You should be fine to flash it and flash ROMs as you please!
Dude, thanks A LOTTTTTT
I want to flash recovery.img posted by Cyanogen on G+. I can find no instructions to fastboot. Does fastboot at all works on Galaxy Tab 10.1? If yes how?
Thanks.
you need sdk set up on your computer to use fastboot here is an easy way to set up
http://forum.xda-developers.com/showthread.php?t=1474895
sean1984 said:
you need sdk set up on your computer to use fastboot here is an easy way to set up
http://forum.xda-developers.com/showthread.php?t=1474895
Click to expand...
Click to collapse
I have sdk installed. Adb work fine with tablet and Evo 3d. Fastboot works with Evo 3D.
I am unable to get nvflash to work. Some tablets seems to not to get nvflash.
How do i put my tablet in Fastboot mode?
donniezazen said:
I want to flash recovery.img posted by Cyanogen on G+. I can find no instructions to fastboot. Does fastboot at all works on Galaxy Tab 10.1? If yes how?
Thanks.
Click to expand...
Click to collapse
don't take offense to this, but I think if you're asking questions like this about a pre-alpha, you might just want to hold off. Or just use on of the Kangs and flash with CWM.
donniezazen said:
I want to flash recovery.img posted by Cyanogen on G+. I can find no instructions to fastboot. Does fastboot at all works on Galaxy Tab 10.1? If yes how?
Thanks.
Click to expand...
Click to collapse
I m in a trouble i want to install Android on my htc kaiser with wm 6.5 but failed i want to install by heret.exe method dont need to remove my wm so i tried method for 2.1 eclair ,2.2 foroyo and 2.3 gingerbread after penguin it stucks with dont mount sd card in 2.1 eclair and something like system.img failure in foroyo 2.2
I have .tgz file for both 2.3 gingerbread and foroyo for kaiser while one .tgz file is full hardware functionality i searched on net .Now plz tell me what to do to run by heret.exe file
donniezazen said:
I want to flash recovery.img posted by Cyanogen on G+. I can find no instructions to fastboot. Does fastboot at all works on Galaxy Tab 10.1? If yes how?
Thanks.
Click to expand...
Click to collapse
I installed CM9 ([ROM][GT-P7500] CM9 KANG (ICS Preview) ) on my Galaxy Tab P7500 just yesterday evening, and so far I'm REALLY impressed by the performance and functionality.
I had some problems during the process and I thought I could share my experiences with you and give a short briefing on how to flash this stuff.
SHORT REVIEW
The ROM is superb. Even though it's half way there with some unimplemented things, the speed of the browser, the font rendering and overall look&feel make it impossible to return to honeycomb.
TESTED WORKING
1) OS in general
2) 3G, WIFI
KNOWN NOT TO WORK
1) Camera does not start
2) Some Trebuchet(CM9 launcher) menus in the settings not yet implemented
3) Screen rotation animations start with a blank screen
WHAT I DID
I started with rooted 3.2 Stock ROM and a battery 75% charged. I don't think rooting the tab beforehand is necessary, as you're going to overwrite the bootloader with CWM anyway.
1) I used Odin 1.85 and flashed Clockwork Recover Mod from Droidbasement, they even have the Stock IO recovery available there too!
- You need to power down the tablet, power it back up and hold both power and volume down buttons when the "samsung galaxy tab 10.1" logo comes visible
- Press volume up button to choose "Download mode"
- Start Odin on your computer, and select the Clockwork mod recovery file in the "bootloader" field
- Connect the tablet using the USB cable, Odin should recognize the device
- Press "Start" to begin the download
2) I transferred the four files listed in mabalito's thread to my tablets storage root folder
3) I booted the tablet to recovery mode
- (Power down, power up)
- Press volume down and power simultaneously when "galaxy tab 10.1" is visible
- Select recovery mode by first pressing power down, the pressing power up
- Select Wipe dalvik cache from advanced menu
- Select factory data wipe from the main menu
- Select apply update from sdcard
- Select apply update from .zip, repeat this step for files 1) GT-P7500-CM9-KANG-020712-maba, 2) GT-P7500-CM9-KANG-012912-maba-kernel-modules 3) Gapps 4) GT-P7500-CM9-KANG-maba-voicesearch-fix
4) Reboot the tablet, you should see the CM9/ICS bootscreen (it hung quite long there for me for some reason, and I got a bit worried, 15mins waiting just did the trick)
5) Enjoy! The ROM is awesome!
slack04 said:
don't take offense to this, but I think if you're asking questions like this about a pre-alpha, you might just want to hold off. Or just use on of the Kangs and flash with CWM.
Click to expand...
Click to collapse
I guess I just have to learn it.
Guys thanks for your responses but do pay attention to the question. No offence but don't hand me oranges when I ask for apples.
donniezazen said:
Guys thanks for your responses but do pay attention to the question. No offence but don't hand me oranges when I ask for apples.
Click to expand...
Click to collapse
not sure why people aren't giving you a direct answer but here:
you don't need the recovery.img for that to work...i just tried it.
all you need to do is to go into the update.script in the zip file, and remove the line that says "get assert" or something like that with notepad...save....put back in the zip file (you may need to first unzip it for it to work....then re-zip it again.)
hope this is apples for you!
ezcats said:
not sure why people aren't giving you a direct answer but here:
you don't need the recovery.img for that to work...i just tried it.
all you need to do is to go into the update.script in the zip file, and remove the line that says "get assert" or something like that with notepad...save....put back in the zip file (you may need to first unzip it for it to work....then re-zip it again.)
hope this is apples for you!
Click to expand...
Click to collapse
Thanks, their are no differences compared to Kangs. Are their? Will give it a try later when I get bored. I just flashed Roman's b24.
donniezazen said:
Thanks, their are no differences compared to Kangs. Are their? Will give it a try later when I get bored. I just flashed Roman's b24.
Click to expand...
Click to collapse
nope...just cm fixes and more settings.
i rooted my phone yesterday and every thing went perfect but now today it wont boot it just flashes lg logo then flashes again with lg logo then says security error. can anyone please help
Dsmforlife92 said:
i rooted my phone yesterday and every thing went perfect but now today it wont boot it just flashes lg logo then flashes again with lg logo then says security error. can anyone please help
Click to expand...
Click to collapse
did you unlock too?
edit: did u do a backup after rooting? can you get to recovery?
jimi_pooh said:
did you unlock too?
edit: did u do a backup after rooting? can you get to recovery?
Click to expand...
Click to collapse
just installed root not unlocked how do you get stock
recovery
anyone please
anyone please i can get in reset screen and download mode
Dsmforlife92 said:
anyone please i can get in reset screen and download mode
Click to expand...
Click to collapse
normally its up volume and power when the phone is off that should get you to the bootloader but not sure if you can get there if not unlocked check out carretts thread on rooting and unlocking
jimi_pooh said:
normally its up volume and power when the phone is off that should get you to the bootloader but not sure if you can get there if not unlocked check out carretts thread on rooting and unlocking
Click to expand...
Click to collapse
i got into download mode what can i do next
Your bootloader is locked. You'll have to LGNPST.
There instructions here:
http://forum.xda-developers.com/showthread.php?t=2006946
Be sure to follow all the steps.
Dsmforlife92 said:
i got into download mode what can i do next
Click to expand...
Click to collapse
dude you might have to do the following
Alternatively, you can use LGNPST to restore a factory image. You need to obtain the following files: LGNPST-PhantomPhreak53.zip, LGNPST_ACG_2.2.3_Lab.zip, and LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip. Follow the following steps (please note: I am less experienced with this process and find it much more tedious. Also, IMHO, I don't think the people you're returning the phone to will care if you leave some minor traces of your unlocking shenanigans. I think the process above this is more than sufficient and simpler). Credits go to Jhoopes517 for this process, he showed me how to do it in his thread.
(Install LG USB drivers)
Extract LGNPST_ACG_2.2.3_Lab.zip, run the installer. Open file explorer to C:\Program Files\LG Electronics\LGNPST and replace the current LGNPST_ACG.exe with the one in the extracted folder (if you are on a 64-bit version of windows, go to C:\Program Files (x86)\LG Electronics\LGNPST)
Extract LGNPST-PhantomPhreak53.zip and run LGNPST_GenericModels_Ver_5_0_12_0.exe and then run LGNPST_Components_Ver_5_0_20_0.exe
In file exlorer, navigate to C:\LG Electronics\LGNPST and copy over the "Models" folder from the extracted Phantom zip folder
Run cmd as administrator and execute the following
Code:
regsvr32 "C:\LG Electronics\LGNPST\Models\LGNPST_LS970.dll"
Extract LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip and change the extension of the .tot file to .bin
Connect phone to computer, power off, and then power on, holding down the power button and both volume buttons
Run the newly replaced LGNPST_ACG.exe from step 2. Select the DLL from step 5 and the .bin from step 6.
Press Start
If LGNPST errors out at 85%, turn your phone off and hold the power button until the phone powers on, then release. DO NOT disconnect the cable before LGNPST is done doing its thing. Your phone may reboot. This is OK.
jimi_pooh said:
dude you might have to do the following
Alternatively, you can use LGNPST to restore a factory image. You need to obtain the following files: LGNPST-PhantomPhreak53.zip, LGNPST_ACG_2.2.3_Lab.zip, and LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip. Follow the following steps (please note: I am less experienced with this process and find it much more tedious. Also, IMHO, I don't think the people you're returning the phone to will care if you leave some minor traces of your unlocking shenanigans. I think the process above this is more than sufficient and simpler). Credits go to Jhoopes517 for this process, he showed me how to do it in his thread.
(Install LG USB drivers)
Extract LGNPST_ACG_2.2.3_Lab.zip, run the installer. Open file explorer to C:\Program Files\LG Electronics\LGNPST and replace the current LGNPST_ACG.exe with the one in the extracted folder (if you are on a 64-bit version of windows, go to C:\Program Files (x86)\LG Electronics\LGNPST)
Extract LGNPST-PhantomPhreak53.zip and run LGNPST_GenericModels_Ver_5_0_12_0.exe and then run LGNPST_Components_Ver_5_0_20_0.exe
In file exlorer, navigate to C:\LG Electronics\LGNPST and copy over the "Models" folder from the extracted Phantom zip folder
Run cmd as administrator and execute the following
Code:
regsvr32 "C:\LG Electronics\LGNPST\Models\LGNPST_LS970.dll"
Extract LGE970AT-00-V10o-ATT-US-SEP-29-2012-0.zip and change the extension of the .tot file to .bin
Connect phone to computer, power off, and then power on, holding down the power button and both volume buttons
Run the newly replaced LGNPST_ACG.exe from step 2. Select the DLL from step 5 and the .bin from step 6.
Press Start
If LGNPST errors out at 85%, turn your phone off and hold the power button until the phone powers on, then release. DO NOT disconnect the cable before LGNPST is done doing its thing. Your phone may reboot. This is OK.
Click to expand...
Click to collapse
i tried to get the phantom files in irc but no one ever replies to me
Dsmforlife92 said:
i tried to get the phantom files in irc but no one ever replies to me
Click to expand...
Click to collapse
ive never had to go back to stock sorry.
You can also buy the freegie app at Google Play for $1. It will install your choice of CWM or TWRP recovery for you.
Pony Express said:
You can also buy the freegie app at Google Play for $1. It will install your choice of CWM or TWRP recovery for you.
Click to expand...
Click to collapse
My phone wont boot only goes into download mode
Sent from my GT-N8013 using xda premium
Since you can get to download mode. You can run the lgpnst go to The channel name is #lg-optimus-g when you go to http://webchat.freenode.net and log in once you do Then type "!info lgpnst" and they will help
Sent from my Optimus G
REDFOCZ said:
Since you can get to download mode. You can run the lgpnst go to The channel name is #lg-optimus-g when you go to http://webchat.freenode.net and log in once you do Then type "!info lgpnst" and they will help
Sent from my Optimus G
Click to expand...
Click to collapse
Yea i did just waiting for a response im wondering why it did this it was running great then all of the sudden it turned off i did freeze two apps to stop ota updates maybe that caused issue
Sent from my Galaxy Nexus using xda premium
Yeah that odd it happened after the fact, I ran into the issue while rooting didn't have it in MTP mode and had to go into download mode to fix it. Did you flash any mod packs or roms after rooting and unlocking
Sent from my Optimus G
REDFOCZ said:
Yeah that odd it happened after the fact, I ran into the issue while rooting didn't have it in MTP mode and had to go into download mode to fix it. Did you flash any mod packs or roms after rooting and unlocking
Sent from my Optimus G
Click to expand...
Click to collapse
No nothing just rooted the phone and froze those 2 apps
Sent from my Galaxy Nexus using xda premium
I wish I could be of more help, but I don't know what would be causing this. Good luck though.
Sent from my Optimus G
REDFOCZ said:
I wish I could be of more help, but I don't know what would be causing this. Good luck though.
Sent from my Optimus G
Click to expand...
Click to collapse
Thanks still no luck with the files no one is answering me
Sent from my Galaxy Nexus using xda premium
Sent you a pm with the link to the file from the IRC, please no not post on the open forum
Sent from my Optimus G
xda premium
LG Optimus L7
Due to the original thread created by BGDonLINE (Maintained by pkatsaras) being a bit unorganized over time I have decided to create a new thread to hopefully give new users a place to go.
Notice: I am not responsible for anything that may happen to your device and anything that you choose to do is your responsibility
The L7 has had its bootloader unlocked thanks to payback and bryk2010 on the 4pda.ru forums, and cwm thanks to many users on the previous thread (thanks will be given once I figure out all those involved)
[I will post any important Information regarding the L7 if need be right here and will change the title if it is important]
Post 2: Custom ROM List
Post 3: Instructions to unlock Bootloader and flash CWM [Updates regarding CWM and Kernel will be found here]
Post 4: Flashing and Rooting Stock Firmware’s
Let me know if anything is missing
CM10 is now available as nightlies (Warning these are early builds and may be unstable) These are CWM Flashable Click Here (As far as I know this must be flashed over V10K)
Thanks to pkatsaras for maintaining the original thread it is a valuable source of information
Custom/Rooted Stock ROM List:
KDZ Flasher
Cyan-Optimus by Abhinandh Ajay
SimpleBlue by SNX
V10K Stock, Rooted, Unlocked Bootloader, CWM, Deodexed KDZ Flashable by Homero2
Rooted and Deodexed V10J Stock (Spain) by -XoRoX-
CWM
Stock V10K Rooted, Zipaligned and Deodexed by usmandreat - (WiFi Fix - CWM Flashable)
CyanogenMod 10 Nightlies thanks to payback and any others involved (Flash over V10K only) (Link Above)
I will add more as I find them, Feel free to let me know of any not on the list
Instructions for flashing Bootloader and CWM
(I am unsure if Root is needed although I would expect it to before this so if you encounter issues root your phone)
1. Download L7_CWM.zip (credits to NormanD for zip)] and extract it to C:
2. Plug you L7 into the computer via USB cable. Make sure you have USB debugging enabled.
3. Go into the C:\L7CWM folder and run Flash_Bootloader.bat your phone will then restart once it has run Flash_Recovery.bat – Once these are both done you will have the unlocked bootloader and touch recovery
WARNING: Flashing a Stock Recovery will remove both of these
Flashing and Rooting Stock Firmwares
You can download any Stock Firmware from the link below
LG Optimus L7 - Stock Firmware List
Guide to flashing KDZ downloaded
1) Download this folder -> KDZ_FWFLASHER.zip and unzip it
2) Download the latest drivers for the device from LG site (Windows USB Drivers) -> www.lg.com
3) Enable USB Debugging mode on you device
4) Go System Settings -> Connectivity -> PC Software
5) Open the folder you unzipped the KDZ and run the file KDZ_FWD_UPD.exe
6) Close the device and put it in Emergency Mode (Push Volume Up+Power at the same time until the device vibrates and then release them)
7) Plug the device in the PC via USB
8) Go to the KDZ screen at your PC and choose Type: 3GQCT and Phone Mode: EMERGENCY
9) In the unzipped fiolder above, choose the file .kdz you've downloaded from the website
10) Click Launch software update and the flashing begins.
Rooting Instructions
For V10A, C and I (Make work on others but untested)
Download V10ACIROOT.7z, extract it the with your phone plugged in and development mode active run RUNME.bat
Your phone will now be rooted
I will post the hard way at a later time
Placeholder (Just in Case)
Thanks Man!!!!! :good::good:
only one little question what are the button combination to enter in CWM ?
Not sure will ask now
Sent through my Galaxy S from the back of a magical flying potato
turn off the phone than push vol + , vol - , home button and power button in the same time and keep pushed until phone shows lg logo and vibrate, after vibrate release the all buttons..
Sent through my Galaxy S from the back of a magical flying potato
Latrop said:
turn off the phone than push vol + , vol - , home button and power button in the same time and keep pushed until phone shows lg logo and vibrate, after vibrate release the all buttons..
Sent through my Galaxy S from the back of a magical flying potato
Click to expand...
Click to collapse
thanks for quick reply!
One Noob Question
will i lose my CWM recovery if i flash firmware though KDZ?
Yes
Sent through my Galaxy S from the back of a magical flying potato
Latrop said:
Yes
Sent through my Galaxy S from the back of a magical flying potato
Click to expand...
Click to collapse
One question, can we root v10k?
Yes, check the post #1844 at the LG Optimus l7 development thread for a step by step guide
Can I use this on a LG L7 p708? from Mexico?...
thanks
As far as I know it has different hardware so no but I'll double check on that
Sent from my GT-I9000 using xda premium
CM9 and 10 released I will update main post in the next hour or two
Sent from my GT-I9000 using xda premium
I installed this CM 10 on my wife's LG P708G, but I cant use the camera, anyone knows how to make it work?
You'll have to reflash stock there is no cm10 for p708
Sent from my GT-I9000 using xda premium
To the OP, thanks for making this thread it helps a lot of noobs out there.
Since you started this I would like to request or suggest if you dont mind. Can you add also some of the developments of LG L7 from 4pda.ru.
By this, it will much easier for non russian to understand and also we dont need to go to translator.
Here's the link:
1. LG Optimus L7 - Flashing Cyanogen Mod (OS 4.1.2)
2. Embellishments LG Optimus L7, Font replacement, icons, and various tweaks and modifications
And lastly, it would be nice no questions here. This should be more of a guide and tutorials. Q&A should be ask on the proper forum.
Thanks and hope it not too much for you.
I don't have time to edit this thread due to exams if a moderator sees this could you close it, its out of date now anyway
Sent from my GT-I9000 using xda premium
Hi guys! This thread is for those who want to fix the baseband "XXXX" problem on their Ace 2. You can check your baseband number in "Settings"->"About phone"
If you think it's gonna take too much to do it, just feel free to look for another way to fix your problem, but the way I did it, I didn't have any problems, so it's your decision whether to do it or not.
So let's start:
Charge your battery before this. Use TriangleAway to reset the flashcounter, in case it's increased.
PART 1 (downgrade to GB) (Optional- you could skip to Part 2, but if the problem is still there, then it means the "modemfs" file will work only with this version of GB I uploaded bellow):
1. You have to downgrade to GingerBread, so download this: I8160XXLK6 and extract it.
2. Download Odin: Odin3_v1.83.zip Install your drivers as well, if you don't have them.
3. Turn on USB Debugging mode from "Developer options"
4. Enter "download mode" by long pressing vol down + home + power, then press volume up again when you see the warning screen.
5. Open Odin as admin
6. Connect your phone through the usb cable and wait till the ID:COM section turns yellow.
7. Click on PDA and choose "CODE_GT-I8160XXLK6_CL1211243_REV00_SEC_KEY_LK6_4G.tar.md5" from the extracted archive. For I8160P download this :CODE_GT-I8160P_I8160PXXLK2_CL1211774_REV00_user_SEC_KEY_XLK2_4G and put it at PDA after you extract it.
Click on CSC and choose "CSC_GT-I8160-MULTI-CSC-0XELF1_SEC_KEY_4G.tar.md5". Then click on PIT and choose “GT-I8160_EUR_XX_4G.pit”.
“Re-Partition”, “Auto-Reboot” and “F Reset Time” options have to be selected as well. (tick re-partition if you have a 3 files stock GB; don't tick it if you have a one file stock ROM--- these are the rules)
8. Click "Start" and wait till everything is finished.
9. Configure you device, till you get to the main screen.
10. Download flashable supersu update_su.zip and copy it to the external sdcard.
11. Enter recovery mode (vol up + home + power button), and click on "apply update from sdcard" (or something similar) and choose the "update_su" file
12. Reboot and after that, download "Android terminal emulator" from Google Play Store.
PART 2 (repairing the baseband). The "modemfs.img.md5" file was extracted from a GingerBread ROM so I don't know if would work if you tried to put it on a Jelly Bean. That's why I added "Part 1" above:
13. Download this Ace2modemfs.img.md5.zip and extract it.
14. Copy the extracted file ("modemfs.img.md5") to your sdcard (internal)
15. Now open the "Android terminal emulator"
16. Type in what is between the quotes: "su". Click on Grant (Allow, or whatever)
then "dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2".
17. After that, close the terminal and reboot the phone. Go to settings-> about phone and check to see if you still have baseband "XXXX". if you don't, go to recovery mode and make a "wipe data".
After everything is finished use Samsung Kies to update to JellyBean. This way you'll be sure that you get the correct update.
With the exact same steps from above, I managed to fix my baseband. I'm not 100% that it will work for you too, but I'm 95% sure that it will. So follow the steps carefully and you'll be good.
If someone tried only PART 2 and worked on a Jelly Bean, just tell me and I'll delete the first part, which is basically a tutorial for GB downgrade.
I think that you can just install jb rom and after that from recovery the zip file.
manthes said:
I think that you can just install jb rom and after that from recovery the zip file.
Click to expand...
Click to collapse
What I said above was the method I tried and it worked. I'm sure there are other methods to do that but I haven't tried them cause this one worked for me.
dragos281993 said:
What I said above was the method I tried and it worked. I'm sure there are other methods to do that but I haven't tried them cause this one worked for me.
Click to expand...
Click to collapse
hi i just got your pm i managed to fix this issue after searching for hours using the modemfs files fluffi444/djmaniac posted. id just like to add that going back to stock isn't 100% necessary. i restored a rom backup i recommend copying only the files you dont have in fluffi444 modemfs when i copied the whole modemfs file i kept getting random drops in reception i noticed a certain .cfg file didnt seem to have the correct permissions. hope this maybe useful to people with this annoying issue.
***Big thanks to fluffi444/djmaniac for providing modemfs files***
Thx for your work, dragos..
I think its good to put al this different ways together in one thread, if you don't mind.
For whom, who needs only the MODEM FS via CWM flashable zip you'll find my post on Android-Hilfe here:
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7835468
fluffi444 said:
Thx for your work, dragos..
I think its good to put al this different ways together in one thread, if you don't mind.
For whom, who needs only the MODEM FS via CWM flashable zip you'll find my post on Android-Hilfe here:
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7835468
Click to expand...
Click to collapse
It's better as a "team", of course. This thread was just one way to solve an issue that it's kinda annoying. So, the more solutions, the better.
How do you got this "xxxx" error? Dont wanna to make same mistake. Thanks
nusko_x said:
How do you got this "xxxx" error? Dont wanna to make same mistake. Thanks
Click to expand...
Click to collapse
I think by flashing with Odin a version of Jelly Bean 4.1.2 that wasn't for my phone. I tried to go from MG2 to MF1. I also remember that I managed somehow to format "modemfs" in recovery, so it's one of these two things.
Thanks bro.
nusko_x said:
Thanks bro.
Click to expand...
Click to collapse
No problem, man.
******
dragos281993 said:
Hi guys! This thread is for those who want to fix the baseband "XXXX" ..... GB downgrade.
Click to expand...
Click to collapse
-rom in russian :/
cant continue
update_su.zip ... shows error :/
MODERATORS, PLEASE CLOSE THIS THREAD !!! I've been using a different device for a few months now, so I can't help those who encounter any errors, following my instructions.
before close have find all thet I need
http://www.sammobile.com/firmwares/download/27460/I8160XXNB1_I8160TMSNB1_TMS.zip/
search there are more COMPLETE ZIPS with PDA,CSC,MODEM !!!! not only PDA as common on links in forums like this :/
kjub6 said:
before close have find all thet I need
http://www.sammobile.com/firmwares/download/27460/I8160XXNB1_I8160TMSNB1_TMS.zip/
search there are more COMPLETE ZIPS with PDA,CSC,MODEM !!!! not only PDA as common on links in forums like this :/
Click to expand...
Click to collapse
You spamming many threads with quite confusing remarks, not really readable posts, and more...
Don't expect any help if you writing like this... I suggest that you start to post your questions more structured...
This suggestion is not only for this post - also and mainly for the bunch of post from you during the last few days.
I really tried to help you but refused, after you came up again and again with a changed situation.
Maybe its time to show you what you've done the last days:
http://forum.xda-developers.com/search.php?searchid=322856854
am deeply sorry to whole comunity was not my point to spamm ... but there was no answer and the confusion was big
and when someone can help me I can delete all messages no problem and clean it up ...
imagine how confusing it is when your main phone breaks down .... :/ ... was really hard for me too
once again sorry for this mess
need PHONE md5 to flash my phone to remove baseband :/ xxxxxxx
kjub6 said:
once again sorry for this mess
need PHONE md5 to flash my phone to remove baseband :/ xxxxxxx
Click to expand...
Click to collapse
OK... try this... For CWM...Flashable zip (DJM is me)
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7835468
OR
for ODIN (for PDA) - Ace2Nutzer is a friend
http://www.android-hilfe.de/root-cu...xxxx-kein-mobiles-internet-2.html#post7902328
OR
Begin from scratch (all data is away) and flash 3-parted GB FW according to your Phone - Do factory reset - After that any JB FW u like.
http://forum.xda-developers.com/showpost.php?p=53921158&postcount=8
BUT: This is nothing else as the OP said in 1 post actually....
thx a lot the first flashable zip worked excelent ... I made all other recoveries before but no success ... but am not argueing that it was late and I was not concentrates ... so mistakes could had been done ... its possible
thank you for your help
Hey guys i did everything as tutorial says and everything is almost ok. I have baseband name but still no signal
dragos281993 said:
Hi guys! This thread is for those who want to fix the baseband "XXXX" problem on their Ace 2. You can check your baseband number in "Settings"->"About phone"
If you think it's gonna take too much to do it, just feel free to look for another way to fix your problem, but the way I did it, I didn't have any problems, so it's your decision whether to do it or not.
So let's start:
Charge your battery before this. Use TriangleAway to reset the flashcounter, in case it's increased.
PART 1 (downgrade to GB) (Optional- you could skip to Part 2, but if the problem is still there, then it means the "modemfs" file will work only with this version of GB I uploaded bellow):
1. You have to downgrade to GingerBread, so download this: I8160XXLK6 and extract it.
2. Download Odin: Odin3_v1.83.zip Install your drivers as well, if you don't have them.
3. Turn on USB Debugging mode from "Developer options"
4. Enter "download mode" by long pressing vol down + home + power, then press volume up again when you see the warning screen.
5. Open Odin as admin
6. Connect your phone through the usb cable and wait till the ID:COM section turns yellow.
7. Click on PDA and choose "CODE_GT-I8160XXLK6_CL1211243_REV00_SEC_KEY_LK6_4G.tar.md5" from the extracted archive. For I8160P download this :CODE_GT-I8160P_I8160PXXLK2_CL1211774_REV00_user_SEC_KEY_XLK2_4G and put it at PDA after you extract it.
Click on CSC and choose "CSC_GT-I8160-MULTI-CSC-0XELF1_SEC_KEY_4G.tar.md5". Then click on PIT and choose “GT-I8160_EUR_XX_4G.pit”.
“Re-Partition”, “Auto-Reboot” and “F Reset Time” options have to be selected as well. (tick re-partition if you have a 3 files stock GB; don't tick it if you have a one file stock ROM--- these are the rules)
8. Click "Start" and wait till everything is finished.
9. Configure you device, till you get to the main screen.
10. Download flashable supersu update_su.zip and copy it to the external sdcard.
11. Enter recovery mode (vol up + home + power button), and click on "apply update from sdcard" (or something similar) and choose the "update_su" file
12. Reboot and after that, download "Android terminal emulator" from Google Play Store.
PART 2 (repairing the baseband). The "modemfs.img.md5" file was extracted from a GingerBread ROM so I don't know if would work if you tried to put it on a Jelly Bean. That's why I added "Part 1" above:
13. Download this Ace2modemfs.img.md5.zip and extract it.
14. Copy the extracted file ("modemfs.img.md5") to your sdcard (internal)
15. Now open the "Android terminal emulator"
16. Type in what is between the quotes: "su". Click on Grant (Allow, or whatever)
then "dd if=/sdcard/modemfs.img.md5 of=/dev/block/mmcblk0p2".
17. After that, close the terminal and reboot the phone. Go to settings-> about phone and check to see if you still have baseband "XXXX". if you don't, go to recovery mode and make a "wipe data".
After everything is finished use Samsung Kies to update to JellyBean. This way you'll be sure that you get the correct update.
With the exact same steps from above, I managed to fix my baseband. I'm not 100% that it will work for you too, but I'm 95% sure that it will. So follow the steps carefully and you'll be good.
If someone tried only PART 2 and worked on a Jelly Bean, just tell me and I'll delete the first part, which is basically a tutorial for GB downgrade.
Click to expand...
Click to collapse
this was also my problem.but i cannot download the modemfs.img.md5. can you still help me?
royaleperson said:
this was also my problem.but i cannot download the modemfs.img.md5. can you still help me?
Click to expand...
Click to collapse
Sorry buddy, I moved on to a different device a long time ago. Of i remember correctly this guy fluffi had a similar thread. Go check it out.
Sent from my Nexus 4 using Tapatalk