Wifi was working fine at stock firm (original rom). Suddenly it stopped working.
When i tap on Wireless&Networks > Wifi, the status remains "turning on" for a few seconds and then shows "Error".
I've tried some things without success, then i decided to clean all the system, and flash a custom ROM for my device, such as EUViewpad7 v1.7b.
Flash was successful, but the problem persists.
My original configuration
Vpad7 w/ Android 2.2.1
Baseband version PR3.7_125
Kernel version Apps_2.6.32.9
Build number 1008_3_240
SWVer=3.240
Model: FM6-0001
HWVer=107
My new configuration
Vpad7 w/ Android 2.2.2
Baseband version PR3.7_125
Kernel version Apps_2.6.32.9
Build number 4027_3_420
SWVer=3.240
Model: FM6-0001
HWVer=107
Does anyone have an idea? Is it a hardware problem?
thanks
U must flash stock rom 2.2.2 with - SUT 1.7 - root - CWM - before flash EU rom, I'm found this problem, too. It's may like alot to do, but it not take a time than 20 minute.
Sent from my ViewPad7 using xda premium
indyend said:
U must flash stock rom 2.2.2 with - SUT 1.7 - root - CWM - before flash EU rom, I'm found this problem, too. It's may like alot to do, but it not take a time than 20 minute.
Sent from my ViewPad7 using xda premium
Click to expand...
Click to collapse
ok. I'll do that as soon as i can find that stock rom.
The root procedure could be done using SuperOneClick 1.7 too?
thanks for the Glimmer of hope!
indyend said:
U must flash stock rom 2.2.2 with - SUT 1.7 - root - CWM - before flash EU rom, I'm found this problem, too. It's may like alot to do, but it not take a time than 20 minute.
Sent from my ViewPad7 using xda premium[/QUOTE
I flashed the official viewpad's stock firm 3.62, which was downloaded from viewsoniceurope web site. (http://forum.xda-developers.com/showthread.php?t=1279231). After have done it using SUT 1.7 my old CWM recovery mode was changed to the original recovery mode. (Android system recovery utility <3e>).
System was restarted with success.
unfortunately, my device's wi-fi problem keeps not working. Click wi-fi to turn it on, but status is "Turning on" for a few seconds and then shows "Error". I've tried several times, but don't work.
Would be that a hardware problem?
Click to expand...
Click to collapse
lucadiq said:
indyend said:
U must flash stock rom 2.2.2 with - SUT 1.7 - root - CWM - before flash EU rom, I'm found this problem, too. It's may like alot to do, but it not take a time than 20 minute.
Sent from my ViewPad7 using xda premium[/QUOTE
I flashed the official viewpad's stock firm 3.62, which was downloaded from viewsoniceurope web site. (http://forum.xda-developers.com/showthread.php?t=1279231). After have done it using SUT 1.7 my old CWM recovery mode was changed to the original recovery mode. (Android system recovery utility <3e>).
System was restarted with success.
unfortunately, my device's wi-fi problem keeps not working. Click wi-fi to turn it on, but status is "Turning on" for a few seconds and then shows "Error". I've tried several times, but don't work.
Would be that a hardware issue?
Click to expand...
Click to collapse
I think so...after four ROM's (always wiping cache/data).
1) Store/stock rom v3.24
2) EUViewpad71.7b
3) Newest/updated stock rom v3.62
and now...
4) kwbr_Viewpad7_4.2
Click to expand...
Click to collapse
Wifi Error Turning on
I've found that if i save and backup my sdcard then use clockworkmod to repartition or clear the dalvik cache etc it works fine.. I think if you tried out multi different ROM then it is just left over stuff in the sdcard that cause these problems.
Related
This is for people who wanna go from Stock GB and based ROM's to Old Baseband ROMs (mik's CM7, Andy's Phoenix, Froyo, etc).
For the vice Versa, just flash the Old BaseBand Back.
If you don't have a Recovery yet
Install ROM manager and Install CWM Recovery, the Latest one will will be installed as u update it, atm the latest one is 5.x
Reboot into recovery and then make a Nandroid Backup. Now if u do anything wrong bla bla u can just restore your backup :_D [You Have not Flashed Baseband yet and don't do it yet!]
Now download your Fav ROM whatever it is, and Put it on your SD card, keep it outside as it will be easier to find. and ofc don't forget to Backup your Contacts and whatever you might need.
Now you are ready to Test the New ROM.
Reboot Into Recovery and wipe
Cache
Dalvik
Battery Stats
do a WIpe/Data/factory Reset
and finally goto mounts and Storage-> Format System
now come back and Say Install Zip from SDCARD
Choose the Zip
IT will do the update and say Process Complete
now Reboot Your Phone.
Your Phone Will Boot into your New ROM.
BUT: if its a Old Baseband Based ROM, you will not get GSM/Data Working don't Panic/Worry
Test the ROM, See the Features Check out the Camera/Wifi/Tether and all the possible things you expected to see and work.
If you are Satisfied with it now u can get ready to Flash the Old Baseband, if you are not Satisfied Reboot into Recovery and Restore your Backup.
--FLASHING OLD BASEBAND---
WARNING: 1'ce you do this (flash Old Baseband) Even u Restore your Nandroid Backup you wont get ur GSM/DATA back you will have to Flash the New Baseband if u wanna get your Stock GB working(New Baseband ROMS). so Proceed only if you are sure of Keeping the New ROM :-D (Old Baseband ROM you just Installed/Tested)
Keep the Tools Ready: 1. the LGMDP-v1.5.exe utility! and 2. the v10 Baseband
Enable USB Debugging on your Phone
Connect your Phone yo your Computer via USB and goto Device manager and Disable the LG Virtual Modem
open LGMDP-v1.5.exe
Select Port : Choose your Phone and Click on Connect
Under the IMAGE folder choose the Location where you Unzipped the Baseband (v10 is Old v20 is New)
u'l get 2 Errors Ignore that Close the Window and Click on Download
the Process will take around 5 mins.
now Dont Do Anything to Your Phone/
Go Grab a Cup of Coffee or Walk your Dog, anything waste those 5mins and come back :-D
You will get a Confirmation that the Process is Complete
Switch On Phone if Its Not Started
If Everything Went Correct you Will Have GSM working on your Phone
for Data Connectivity Please Input Your Settings Like Access Point Bla bla in the Network Setup
--------------
Now!: if you dont wanna stay on the Old Baseband ROM you can go Back to the New Baseband ROMS ofc just follow the Baseband Instructions Above and Instead of Choosing the v10 Image Choose the v20 Image
do that and u'l be On the NEw Baseband :-D
-------------
Conclusion: You Can Flash BaseBand first and then ROM or ROM first and then Baseband
Hope i Helped :-D
Links
Old BaseBand
New Baseband
LGMDP-v1.5 Tool
Changing Kernel and updating ROM to newer version:
Wipe Dalvik Cache,Cache and Battery Stats.
Changing ROM : FormatSystem, Wipe Data(<- Or Else u'l get a Gazillion FC's) and the Above3 then Install your ROM
I Have Stock ROM i wannna go Custom ROM
1. Root your Phone (gingerbreak should do the job)
2. Install ROM Manager
3. Flash Latest CWM from ROM Manager
4. Download the ROM u want
5. Flash it Via CWM
If Your Data/GSM Dosn't Work :- U have Wrong Baseband :- Refer to 1st Post
Installing ROM
1. mounts and storage -> system-format
2. Clear Data
3. Clear Dalvik Cache,Battery Stats and Cache
4. Choose Zip to Apply Update
5. Reboot!
Enjoy :-D
Do u quarrel with yourself or what
Thank you so much
Sent from my LG-P500 using XDA App
Will that tool get the stock ROM IF it comes to p500?
Sent from my LG-P500 using XDA App
QUOTE=vlt96;18649194]Will that tool get the stock ROM IF it comes to p500?
Sent from my LG-P500 using XDA App[/QUOTE]
Noo i don thin so, just the old baseband
jabbeboy said:
QUOTE=vlt96;18649194]Will that tool get the stock ROM IF it comes to p500?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Noo i don thin so, just the old baseband[/QUOTE]
No so it can get you back to the new baseband, but if a newer baseband(the 4.0) comes to p500, but i don't think it comes, will it update?
Sent from my LG-P500 using XDA App
vlt96 said:
Noo i don thin so, just the old baseband
Click to expand...
Click to collapse
No so it can get you back to the new baseband, but if a newer baseband(the 4.0) comes to p500, but i don't think it comes, will it update?
Sent from my LG-P500 using XDA App[/QUOTE]
4.0 Baseband is not out idk when it wil be out
atm we just have 2 Basebands
all Custom ROMS of 2.3.x ( non Official [2 major 1's that are Andy's Phoenix and mik's CM7 ] ) are on the Old Baseband
and All the Original Gingerbread Based ROMS 2.3.3 are using the New Baseband.
4.0x <- nothing till date
and if u wanna Flash Stock GB just get the Zip file and Flash it like like u flash any other ROM
/wipe data
/format system
Flash ZIp
gnsxp said:
No so it can get you back to the new baseband, but if a newer baseband(the 4.0) comes to p500, but i don't think it comes, will it update?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
4.0 Baseband is not out idk when it wil be out
atm we just have 2 Basebands
all Custom ROMS of 2.3.x ( non Official [2 major 1's that are Andy's Phoenix and mik's CM7 ] ) are on the Old Baseband
and All the Original Gingerbread Based ROMS 2.3.3 are using the New Baseband.
4.0x <- nothing till date
and if u wanna Flash Stock GB just get the Zip file and Flash it like like u flash any other ROM
/wipe data
/format system
Flash ZIp[/QUOTE]
Ok tnx
Sent from my LG-P500 using XDA App
Flashed it, had lots of errors and nothing was clear on that pc tool, but a reboot did the job after that
Sent from my LG-P500 using XDA App
vlt96 said:
Flashed it, had lots of errors and nothing was clear on that pc tool, but a reboot did the job after that
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
FLashed it :-> ok
Had a lots of Errors :-> Where? the LG Tool?
Nothing was clear on the PC Tool :-> Wasn't CLear as in not in english?
Reboot did the job after that :-> Problem Solved? what got solved?
*confused
gnsxp said:
FLashed it :-> ok
Had a lots of Errors :-> Where? the LG Tool?
Nothing was clear on the PC Tool :-> Wasn't CLear as in not in english?
Reboot did the job after that :-> Problem Solved? what got solved?
*confused
Click to expand...
Click to collapse
Im confused too, but it was succes...
Sent from my LG-P500 using XDA App
gnsxp said:
This is for people who wanna go from Stock GB and based ROM's to Old Baseband ROMs (mik's CM7, Andy's Phoenix, Froyo, etc).
For the vice Versa, just flash the Old BaseBand Back.
If you don't have a Recovery yet
Install ROM manager and Install CWM Recovery, the Latest one will will be installed as u update it, atm the latest one is 5.x
Reboot into recovery and then make a Nandroid Backup. Now if u do anything wrong bla bla u can just restore your backup :_D [You Have not Flashed Baseband yet and don't do it yet!]
Now download your Fav ROM whatever it is, and Put it on your SD card, keep it outside as it will be easier to find. and ofc don't forget to Backup your Contacts and whatever you might need.
Now you are ready to Test the New ROM.
Reboot Into Recovery and wipe
Cache
Dalvik
Battery Stats
do a WIpe/Data/factory Reset
and finally goto mounts and Storage-> Format System
now come back and Say Install Zip from SDCARD
Choose the Zip
IT will do the update and say Process Complete
now Reboot Your Phone.
Your Phone Will Boot into your New ROM.
BUT: if its a Old Baseband Based ROM, you will not get GSM/Data Working don't Panic/Worry
Test the ROM, See the Features Check out the Camera/Wifi/Tether and all the possible things you expected to see and work.
If you are Satisfied with it now u can get ready to Flash the Old Baseband, if you are not Satisfied Reboot into Recovery and Restore your Backup.
--FLASHING OLD BASEBAND---
WARNING: 1'ce you do this (flash Old Baseband) Even u Restore your Nandroid Backup you wont get ur GSM/DATA back you will have to Flash the New Baseband if u wanna get your Stock GB working(New Baseband ROMS). so Proceed only if you are sure of Keeping the New ROM :-D (Old Baseband ROM you just Installed/Tested)
Keep the Tools Ready: 1. the LGMDP-v1.5.exe utility! and 2. the v10 Baseband
Enable USB Debugging on your Phone
Connect your Phone yo your Computer via USB and goto Device manager and Disable the LG Virtual Modem
open LGMDP-v1.5.exe
Select Port : Choose your Phone and Click on Connect
Under the IMAGE folder choose the Location where you Unzipped the Baseband (v10 is Old v20 is New)
u'l get 2 Errors Ignore that Close the Window and Click on Download
the Process will take around 5 mins.
now Dont Do Anything to Your Phone/
Go Grab a Cup of Coffee or Walk your Dog, anything waste those 5mins and come back :-D
You will get a Confirmation that the Process is Complete
Switch On Phone if Its Not Started
If Everything Went Correct you Will Have GSM working on your Phone
for Data Connectivity Please Input Your Settings Like Access Point Bla bla in the Network Setup
--------------
Now!: if you dont wanna stay on the Old Baseband ROM you can go Back to the New Baseband ROMS ofc just follow the Baseband Instructions Above and Instead of Choosing the v10 Image Choose the v20 Image
do that and u'l be On the NEw Baseband :-D
-------------
Conclusion: You Can Flash BaseBand first and then ROM or ROM first and then Baseband
Hope i Helped :-D
Links
Old BaseBand
New Baseband
LGMDP-v1.5 Tool
Click to expand...
Click to collapse
Did it in 1 go!! thnx
I have a problem with LGMDP app because after i select the baseband the start button freezes , even if i select the run as administrator button when i start the LGMDP
I've been waiting for 30mins+ and nothing happened!
The LGMDP says" Trying to communicate with phone and the phone is in emergency mode!
KoulisHHH said:
I've been waiting for 30mins+ and nothing happened!
The LGMDP says" Trying to communicate with phone and the phone is in emergency mode!
Click to expand...
Click to collapse
30mins u say? Last time I did it actually the 1st time I did Iit that happened ... ok don't blame me of anything screws up but......if u waited like 30mins unplug the phone and press the power that should do the trick I remember I did it last time like that so give it a try
killerash said:
I have a problem with LGMDP app because after i select the baseband the start button freezes , even if i select the run as administrator button when i start the LGMDP
Click to expand...
Click to collapse
Using win7x64?
gnsxp said:
30mins u say? Last time I did it actually the 1st time I did Iit that happened ... ok don't blame me of anything screws up but......if u waited like 30mins unplug the phone and press the power that should do the trick I remember I did it last time like that so give it a try
Click to expand...
Click to collapse
nope,nothing.I'm running the program as admin,and I'm flashing the old baseband nad I hace also tryed flashing the new one....:S
Thanks for the guide, I had to redo my baseband for an CM7 Rom. Just annoying you have to switch to the new baseband for Gingerbread.
This a tricky business, I am happy with Mike's CM7 with gsm fix
My son has one of these ph's...
Soonish I will install recovery using odin & then make a nandroid of his stock rom...
once we have that done I'm guessing he'll want to try a custom rom
do I need to flash a 2.2 stock rom before trying CM7??
If so, which stock rom should I be using... I'm from New Zealand btw (next to Australia).
T.I.A
Pre-requisites:
Visit the Basebands thread and make sure that you are using a baseband that is recommended for CyanogenMod.
You need a rooted phone, ClockworkMod Recovery (first time users must flash with Odin), and ROM Manager. For more information on all three items, see the Getting started with ROM Manager & ClockworkMod section in post #2.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1149110
In order to avoid flashing 2.2 then going to CM7 you will need first the correct baseband for your region and flash it with Odin before flashing CM7 port by MADTEAM. I hope that this was helpful
chillvisio said:
http://forum.xda-developers.com/showthread.php?t=1149110
In order to avoid flashing 2.2 then going to CM7 you will need first the correct baseband for your region and flash it with Odin before flashing CM7 port by MADTEAM. I hope that this was helpful
Click to expand...
Click to collapse
Thanx for reply ^^
but...my sons ph is stock 2.1, so it already has correct baseband
You're saying I can go straight to CM7 (from 2.1) as long as I flash correct baseband along with CM7 install?
Once I have CWM installed & everything backed up I'll give it a nudge
King_Rat said:
Thanx for reply ^^
but...my sons ph is stock 2.1, so it already has correct baseband
You're saying I can go straight to CM7 (from 2.1) as long as I flash correct baseband along with CM7 install?
Once I have CWM installed & everything backed up I'll give it a nudge
Click to expand...
Click to collapse
I understand, but you already need the 2.2 baseband version before installing CM7 port. It won't work with 2.1 baseband. Just go to madteam.co forum and grab the latest baseband version for your region, then flash it, and finally flash the CWM.
Stuck @ Odin ^^
chillvisio said:
I understand, but you already need the 2.2 baseband version before installing CM7 port. It won't work with 2.1 baseband. Just go to madteam.co forum and grab the latest baseband version for your region, then flash it, and finally flash the CWM.
Click to expand...
Click to collapse
Odin won't detect ph??
Cable is working... (can get into kies)
Ph is in download mode...
Drivers are installed (those for when ph is awake [auto installed via Win 7] & those from Samsung site when ph is in download mode [manually installed])
Must be the OPS file!!
I need one for GT I5500...
when I select the OPS that came in archive from the 'How to install CWM & CM7' thread... it shows I5500 @ the top of tool & not GT-I5500 from the images in the guide...
Please advise
These are the steps that I'm using to flash stock and other ROMs: http://forum.xda-developers.com/showpost.php?p=13958380&postcount=2
You have to pass the three key combination in order to enter "download mode". After you are in, you will like to load the OPS file which is named EUROPA_v1.0.ops. Choose "one package" in Odin options in the left and load the baseband that you've downloaded at the baseband thread in "One package" down in the right. Then connect the phone and the spot called "Com port mapping" will light up in yellow which means that not only that your phone has been detected, but it is ready to be flashed. Now click the "Start" button and wait a few seconds. Your phone will restart and probably will bootloop. Take out the battery and place it back in a few seconds later. Go to download mode again and load the CWM tar as "one package". Then flash again.
After the phone restarts you will be within the ClockworkMod recovery. Now it is time to place the update and gapps (should your son need google apps package for some reason) in the root folder of your microSD card (or in some folder called eg. CyanogenMod). Flash the CM update, wipe all data, cache, dalvik, battery stats, fix permissions, restart and you will see the blue skating robot. If you have a bootloop, redownload the update file for CM and reupload it to to sd card... now you are using the CM port by psyke83
chillvisio said:
I understand, but you already need the 2.2 baseband version before installing CM7 port. It won't work with 2.1 baseband. Just go to madteam.co forum and grab the latest baseband version for your region, then flash it, and finally flash the CWM.
Click to expand...
Click to collapse
Dude!! I flashed the baseband from madteam and now I'm in boot loop
Knew it sounded fishy
baseband on my moto is changed after rom install... not before
I'd appreciate if you could point me to a stock firmware that I can flash with Odin or tell me the key combination to get into recovery mode so I can restore the backup I made...
Edit: Found a English stock 2.2 rom which I flashed using Odin...
Can't we get into recovery with a key combo?? Seems odd
Here is the sequence of upgrading from 2.1 to CM7 port:
Plan B
1. flash baseband for 2.2 (or flash 2.2 itself and it will replace 2.1 baseband with 2.2 one)
2. flash CWM and it will reboot in recovery mode
3. install CM7 from update file from goo-inside.me...
or:
Plan A (psyke83 prefers this one)
1. root 2.1
2. install GooManager from G Play Store
3. open GooManager, check for updates, download update and enter recovery to install CM7
It looks like you've just completed step 1 from Plan B. Now it's time to visit download mode again and proceed with step 2, then step 3 and you are running CM7.
I tried going from stock 2.1 to CM7...my G5 is from the Middle East, with XSG product code so it was sitting on 2.1 since I bought it...
No matter how many times I tried going into recovery, performing the "4 wipes" and then installing in the correct sequence, it wouldnt leave boot loop...to top it up, my stock JJ2 rom flashed using Odin was also boot-looping...
I only rescued my phone by first flashing i5500XXJED and then going back to my stock ROM...
Was this because I didn't go from 2.2 to CM7?
got CM7 on it no probs ^^
tried reboot via power menu options & ph stuck at boot!?
Spent the better part of next 2 hours getting back to working 2.2...
will try suggestions below...
Edit: CM7 on & working ^^ going to stay away from 'Reboot' option though ;-P
Well, should you find CM7 not stable enough, just go with 2.2 until a stable CM7 relase is up.
You could also try this one: http://www.madteam.co/forum/development/(beta-released)-mad-rom-2-5/
Sms text is white on white... Swiping up turns text black.
The biggie is no lock screen?!
Any one got a fix for this bug?
King_Rat on tap
We've settled on clean rom ^^
visually it's bit of a dogs breakfast
Extra large slider tabs!? Baby blue on baby blue!? No theme engine? (anyone know how to manually install this??)
Functionality seems to be good ^^ couple of the games he likes have a screen time-out glitch...
Otherwise all is good
Hello All,
I have vibrant which is runing on 2.2 and I want to root it and update it. I have successfully root it via superoneclick and install rom manger from play store. I have select flash clockworkmod recover option like in image 01 as when i m trying to click samsung galaxyS Vibrant option nothbut ing was happening. so I clicked second option and it shows some progress and then give me successfully installation msg. Then I clicked to reboot into recovery but it will take me to the stock recovery like image 03 and when I clicked reinstall packages it gives me error like image 04 also when I tried to install clockworkmod recovery via other devices which are not in list it will give me msg like image 05. I have tried both method but I am unable to go in to clockworkmod recovery. Can any one help into this that how I will fix this thing ?
Thanks in advance
more images
guys I have found one solution for the issue on:
http://forum.xda-developers.com/showthread.php?t=833423
I tried it but after doing this when I go to stock recovery and click on reinstall packages phone will restart and boot into stock recovery again any help ?
imk79 said:
guys I have found one solution for the issue on:
http://forum.xda-developers.com/showthread.php?t=833423
I tried it but after doing this when I go to stock recovery and click on reinstall packages phone will restart and boot into stock recovery again any help ?
Click to expand...
Click to collapse
The easiest way is to use the update.zip boot into stock recovery and keep hitting reinstall packages I normally have to do it three or four times. Make sure you have a new ROM to flash so that when it goes into clockwork finally you can flash it and keep root. If you don't flash a new ROM it will automatically take you to stock recovery every time you try to reeboot recovery
Sent from my SGH-T959 using xda app-developers app
ok after spending full day I am able to flash this rom on my vibrant:
http://forum.xda-developers.com/showthread.php?t=1900590
but the first issue which I faced is that battery drain out very quickly ? Do I need to hard rest it at least once after flashing the rom ?
imk79 said:
ok after spending full day I am able to flash this rom on my vibrant:
http://forum.xda-developers.com/showthread.php?t=1900590
but the first issue which I faced is that battery drain out very quickly ? Do I need to hard rest it at least once after flashing the rom ?
Click to expand...
Click to collapse
Question is which ROM are you using
Sent from my SGH-T959 using xda app-developers app
how do I check this ? I have downloaded the zip from the link which I have added in previous post its based on 4.1.
Go to settings>about phone.
BTW, you are running an old, no longer supported version of miui.
Also I wouldn't use ROM manager at all.
Eat Play Google
I have a Galaxy i9100 from a uncle wich stoped to work, he said it sudenly stop and it doesn't want to come alive again
the reality, it was stuck on the samsung logo page, so i come with Vol+Power+Key to the recovery mode to make a wipe cache partition first (what did not solve the problem) and a data/factory wipe afterwards,
It worked, but only for a while, after I set up wifi and google acount and start download the samsung update, the mobile restart after few seconds and got stuck again the logo screen.
Wiped three times, always the same, after couple minutes of usage, it restart and got stuck
Also, it fails to load the "desktop", both the icons and the application menus
all I guess, is that the internal memory got corrupted or fails in some way,
how could I make a "memtest" or what else I can do to check if the mobile could be repaired?
the recovery mode says "Android system recovery <3e>" and it allows to apply updates from ADB, from external storage and from cache. Could I apply some update to make it work?
as I got told after an "interrogation", my uncle was using one of this "cleaner" and was removing own samsung apps becouse "I never using them" and suddenly got dead
that shouldn't be a problem if the internal memory is ok after making a factory reset, isn't it ?
If he used some root cleaner then not. Just try to download the firmware and update it with odin or check my link with xwms1 flashable zip in my signature. Then you only need to do if you are on stock to flash philz kernel temporary or the other one and reboot.
My build is included with stock kernel so no changes made. If you want full stock flash odexed. Cause all the normal official versions were odexes I believe
Goodluck with your uncles phone.
Sent from my GT-I9100 using Tapatalk
What Android version was installed on the phone? Do not say it was on 4.0.4, because then there is a big chance you bricked it by applying the factory reset ...
Sent from my Nexus 7 using xda app-developers app
AndDiSa said:
What Android version was installed on the phone? Do not say it was on 4.0.4, because then there is a big chance you bricked it by applying the factory reset ...
Click to expand...
Click to collapse
Not sure, I suppose the last one, because when I tried to update with Kies, it say me it is up to date
wulsic said:
If he used some root cleaner then not. Just try to download the firmware and update it with odin or check my link with xwms1 flashable zip in my signature. Then you only need to do if you are on stock to flash philz kernel temporary or the other one and reboot.
My build is included with stock kernel so no changes made. If you want full stock flash odexed. Cause all the normal official versions were odexes I believe
Click to expand...
Click to collapse
before read your comment, I found this two tutorials :
http://mobilenetworkcomparison.org.uk/tutorial-how-to-restore-the-stock-samsung-galaxy-s2-rom/#stock
http://mobilenetworkcomparison.org.uk/tutorial-rooting-and-installing-cyanogenmod-with-odin/#odin
Well...
If I instal Cyanogenmod, it works flawlessly, so, I tought everything was in place.
Then I installed the stock rom, and it fails again as earlier, stuck on loading "SAMSUNG" logo
once more Cyanogenmod, and then working
once more stockRom, and then stuck
so, I give my uncle with cyanogenmod, and he say that "this new operative system is more difficult and ugly than the other one..."
problem is, sort of, solved, but how comes I can't make the stock Rom working while cyanogenmod work ok ?
Hey,
I have since become a S3 ... I have rooted it and wanted to play another Rome.
First I flashed my Carbon ... that was wonderful, but I had no wifi. Then I tried another Rom (with aroma installer). When I had WiFi, but since I have the menu did not like it and it was me too many Samsung Apps.
Now I have flashed me the Resurrection Remix, but the S3 boots constantly new to the CWM.
The same I have with CM11.
What am I doing wrong please?
lolamarcel said:
Hey,
I have since become a S3 ... I have rooted it and wanted to play another Rome.
First I flashed my Carbon ... that was wonderful, but I had no wifi. Then I tried another Rom (with aroma installer). When I had WiFi, but since I have the menu did not like it and it was me too many Samsung Apps.
Now I have flashed me the Resurrection Remix, but the S3 boots constantly new to the CWM.
The same I have with CM11.
What am I doing wrong please?
Click to expand...
Click to collapse
You need to install exactly like below don't miss any steps
-Installation-
1.- Wipe data / factory reset (mandatory if you coming from STOCK OR 4.2.X version or another ROM)
2.- Install the Main ROM
3- install gapps
4.- When you're back on recovery go to Advanced
5.- Wipe Dalvik Cache
6.- Fix Permissions
7.- Wipe Cache Partition
8.- Reboot
If it still not working flash TWRP recovery and use that to flash the rom
Hey,
I just did it. Then came the Samsung logo, phone restarts and I'm back in the CWM.
Have just flashed TWRP reboot (via CWM) Recovery and but still have CWM.
Grrrrrr ...... what for now
Better download official firmware from Sammobile and install thru Odin. Then Root and carry on with your favorite custom rom.
Yes I agree with KSKHH if problem still there return to stock with odin and start again..
tallman43 said:
Yes I agree with KSKHH if problem still there return to stock with odin and start again..
Click to expand...
Click to collapse
How are you doing? Your phone is working now?
Hey,
so suck an official firmware and flash it with Odin ... then the CWM away again?
If I then use the rooten begin I play me but come back on automatically, or not?
lolamarcel said:
Hey,
so suck an official firmware and flash it with Odin ... then the CWM away again?
If I then use the rooten begin I play me but come back on automatically, or not?
Click to expand...
Click to collapse
Steps:
Install ORIGIANAL firmware via ODIN
Don't need to root
INSTALL CUSTOM RECOVERY
Copy desired ROM into memory card (or intrernal, if dont have memory card)
Wipe all
Install
Profit
Hey,
I have now taken me this firmware:
I9300XXUGML2_I9300DTMGML2_I9300BOUGMK3_HOME.tar
Odin started, specified in the PDA tar file, made my S3 in the download mode, USB cable ran ... it was detected and was also flashed. Now I sit for at least 10 minutes and nothing happens.
The Samsung logo always changes its color and the LED on the top left light blue.
lolamarcel said:
Hey,
I have now taken me this firmware:
I9300XXUGML2_I9300DTMGML2_I9300BOUGMK3_HOME.tar
Odin started, specified in the PDA tar file, made my S3 in the download mode, USB cable ran ... it was detected and was also flashed. Now I sit for at least 10 minutes and nothing happens.
The Samsung logo always changes its color and the LED on the top left light blue.
Click to expand...
Click to collapse
Boot into recovery then factory reset..
hey,
exactly these thoughts I had just as well.
Meanwhile, I have written this text did something on the screen ... the phone goes again.
Thanks to all
So now just flash a recovery and then flash as usual custom of Rome?
Edit:
GT-I9300
Android 4.3
Baseband I9300BOUGMK3
Kernel: 3.0.31-2303192 [email protected]#1 FriDec 13 21:55:31 KST2013
Build: JSS15J.I9300XXUGML2
Edit2:
Hey,
so, now I have successfully flashed TWRP and tested.
Now I'll try to flash CM11 ... hopefully it starts this time also
Edit 3:
so, now it has worked wonderfully.
Thanks again for the help