[Q] Tried to flash TWRP, now looks bricked :( - HTC EVO 3D

Hey guys, Today I just finished downgrading to HBOOT 1.4 and got up and running fine on TWRP 1.1.1 and ViperRom's new ICS build. I wasn't having any issues at all. I started reading about TWRP2 though, and felt like checking it out. So I downloaded GooManager and searched for TWRP and got openrecovery-twrp-2.1.3.blob. I touched it to download and it immediately went into recovery to install. However, as soon as it rebooted, it came up with TWRP 1.1.1's logo and a scrolling status bar. This lasted about 2 seconds and then the phone shut off. I left it as is hoping it would come back for about 10 min but nothing. I removed the battery and put it back in and tried to reboot. Booting to system and booting to recovery give zero response and ADB controls don't seem to recognize the device when plugged into USB. Can anybody help? TWRP2 doesn't seem to have a thread here and their site has limited resources for help.
thanks.

Can you boot into the bootloader (hold power and down on startup)?

no I cannot. Phone is completely unresponsive. I didn't think trying to flash a recovery would cause complete system failure.. wth

Just to be clear, before you call it a brick, did you remover battery for 10 seconds and then try to get to the bootloader. Hold down the volume first then the power button and keep holding both until the bootloader pops up. Just making sure...

yeah I did. Pulled the battery, left it out while I went and ate something, then plugged in the HTC charger and tried to reboot and nothing. Tried putting the battery back in and doing the same thing. I guess It's time to go to sprint and beg for mercy

Same thing happened to me. My phone is completely unresponsive after I tried to update to TWRP 2.1. I was on AOKP milestone 5a. The computer responds when I connect the USB, but the phone will not boot at all.
EDIT: Computer doesn't respond either. Think I'm headed to the nearest Sprint store ASAP.

Connect your device to your computer then go into your adb directory in cmd and type. "adb reboot-bootloader" (without the quotation marks)

Are you s-off ? And does the phone show up as qhusb_dload in device manager ? If it does it is bricked. If you still have s-on it can be fixed if you are s-off i am sorry to say you have to get a new phone. I have a phone now that is s-off and bricked and i cant recover it as of now but i am working on it, if i succeed i will post how to do it.
I would recommend trying to keep the bricked phone in case there is a way to unbrick eventually then you have another phone to play with. I just claimed my insurance and told them i dropped the phone in a porta-john at work and i wasn't about to fish it out. So they told me dont worry about sending the bricked phone in and i got my new one next day.

Related

[Q] Recovery & Flashboot issues. help is appreciated [SOLVED]

First off id like to say thanks in advance to any replies and also apologize if this has been posted previously (i searched and could not find anything that was helpful) I lurked around these forums when i had my x1 and im hoping you guys can be as helpful for me as you are for everyone else. anyway onto the issue
I used the superboot method to root my ATT US Streak. My intentions were to update to 2.1 following the steps in the "eclair working on my u.s. unlocked streak!" thread (wont let me put a link since its my first post)
after using fastboot to root the phone will boot up and function fine but recovery and fastboot no longer work. i tried flashing Koush's custom recovery and other things that require fastboot and the terminal just says "sending..." nothing happens no errors or anything, the cmd prompt just sits there and i need to remove the battery to reboot the device.
i then downloaded the Rom Manager apk from the market and flashed the clockwork recovery from there (it said i did anyway). when i load the recovery from boot (volume keys + power and its the stock recovery) and chose option 2 to flash modaco custom rom or even the stock dell rom it just goes to a black screen and i once again need to remove the battery to reboot.
the phone itself is still functioning fine when it boots up and everything works the way it should other than the home, menu, and back button lights flash in random orders, thats just annoying though. again any help is appreciated
so what should i try next?
EDIT: woke up this morning and now the device will not turn on. i tried starting to fastboot and recovery but still nothing. plug it into my pc and i get the "found new hardware wizard" for a Qualcomm CDMA Technologies MSM.
first real brick? ha that would be my luck
EDIT 2: a kid just ran through my work, grabbed my phone and threw it on the ground. it screwed up the 30 pin connector on the phone and the charger. im going to hurt somebody. phone is booting again though... put sd card back in and still boots fine
SOLVED: Dont know the technical reasons behind it but i had to reinstall the drivers and switch usb ports for every fastboot and recovery procedure
removed SD card and its booting up normally. any thoughts?

[Q] I bricked my Rezound need help

At first, I apologize if i didn't see this kind of thread. I was looking for solution for a couple of weeks and didn't find anything that would help...
My Rezound is S-OFFed with 2.27 hboot and CWM recovery (the one befor CMW6.*****).
I dodn't know what made me try flashing CMW 6.*** but i did. Right after i flashed CMW 6, i went to "advanced" and rebooted recovery.
This is where weird thing happend: My phone just turend off. I tried to turn it on but i doesn't do anything.
While in Windows, if i connect my phone it shows up as QHSUSB_DLOAD
I tried:
pulling out/in the battery - didnt help
Connecting charger and turning the phone on without battery and holding vol - - didn't help
I also tried " [UNBRICK]Wanna unbrick your Rezound? (9/8, Episode VI, Return of The Zip)" and ended up with something like " device isn't found". I tried it in Urbundu 12.04
Ivanov4912 said:
At first, I apologize if i didn't see this kind of thread. I was looking for solution for a couple of weeks and didn't find anything that would help...
My Rezound is S-OFFed with 2.27 hboot and CWM recovery (the one befor CMW6.*****).
I dodn't know what made me try flashing CMW 6.*** but i did. Right after i flashed CMW 6, i went to "advanced" and rebooted recovery.
This is where weird thing happend: My phone just turend off. I tried to turn it on but i doesn't do anything.
While in Windows, if i connect my phone it shows up as QHSUSB_DLOAD
I tried:
pulling out/in the battery - didnt help
Connecting charger and turning the phone on without battery and holding vol - - didn't help
I also tried " [UNBRICK]Wanna unbrick your Rezound? (9/8, Episode VI, Return of The Zip)" and ended up with something like " device isn't found". I tried it in Urbundu 12.04
Click to expand...
Click to collapse
Can you boot into bootloader? Pull battery and put it back in and hold down power+vol down. If so cant you just flash a new recovery?
It sounds like your phone is stuck in Download Mode, that is used by the older RUU EXE files... you run it from your PC and just walk through the steps to install the firmware. Perhaps trying one of those, they can be downloaded here: http://mobile-overload.com/topic/53-ruu-htc-rezound-ruu-roundup/ but I think the newest EXE version you will get is 2.1.605.11 which is Gingerbread. It will return your phone to bone stock Gingerbread, S-ON, stock recovery, and all that good stuff, but it might work and get you running again.
It's the glitch that you get when you install cwm on a rezound, you can't charge your battery. Look it up on xda they have a solution.
That's the thing. It doesn't work at all.
Sent from my SCH-I535 using xda premium
Here's the link to save your ass.
http://forum.xda-developers.com/showthread.php?t=1711408
If you need to buy another I can sell you mine 230 + shipping obo
mforminio7 said:
Can you boot into bootloader? Pull battery and put it back in and hold down power+vol down. If so cant you just flash a new recovery?
Click to expand...
Click to collapse
The phone doesn't work at all. It doesn't even turn on.

Some help is needed - phone is stuck...

Alright so I've been running UKB and Cubed kernel for the last 6 days without issue. I've had some random reboots and the phone locking up, but I was just going to deal with it until ViperDNA came out. So this morning comes and I unlock my phone and the phone reboots within 2 minutes. Comes to the lock screen and is completely stuck... Alright it happens. I hard reboot the phone (holding down power and volume down buttom) and reboot the phone. Still, it is frozen at the lock screen. Phone is coming up in ADB devices, but it cannot accept any commands. I reboot into recovery (CWM 6.0.2.1) and try to clear cache/dalvik. Reboot the phone and it's still stuck at the lock screen. I go into fastboot and push the stock kernel, phone boots gets to the lock screen, starts of fine and then locks again. I don't have any earlier restores to go to on the phone as I shifted them to my HDD to save a little space. I feel like an idiot now. Any help would be appreciated.
I also tried to sideload ViperDNA via CWM and it isn't showing up the device in ADB.
EDIT: Also while in Fastboot the computer shows the device as attached via Removable hardware as Android 1.0 it just wont let me sideload or push anything other than a kernel.
This happened to me at one point.. I had to re lock the phone in the all in one tool and reunlock and start fresh.. No problem since
With help from Dr_demento on the IRC channel I was able to get the phone booting again. For future reference of people running into this issue, formatting data helps. You'll unfortunately lose everything, but it's better than locking the phone and then unlocking it again.

Boot loop....not rooted

Ok snoot sure if anyone has experienced this but randomly after using my phone this morning I noticed it was getting really warm in my pocket. I took it out only to realize I am stuck in a boot loop. I can hold volume down and power and get into hboot, but none of the options....even factory reset do anything, just sends the phone into another boot loop. The kicker is that I have never even attempted to REIT my phone yet. Any suggestions other than going to Verizon and taking my chances there?
Have you tried holding down the power button for 10 seconds to hard reboot the device?
If that doesn't work, try getting the phone into the bootloader, connect it to your computer and try to flash an RUU from there. There's a link to the download for it in the development section, along with guides on how to use it. If you can't flash the RUU, post back here and we can help with that, but if the RUU flashes successfully and it still boot loops, there's probably not much to do except take it back.

Bricked Lg V10 Need Help!

I was on my phone when suddenly it just booted off for no reason, weird right? So now it just stays on the "LG" boot up screen and now do anything. I've tried everything and done everything right (as far as I know) before I get into that let me tell you what my device can do as of now:
Devices DOES have fastboot oem unlock done
Phone was rooted as well and working perfectly (or so I thought until this happened)
ADB doesn't seem to work, but fastboot when connected to the computer does.
Ex: ADB devices (blank)
but fastboot devices (shows phone connected)
I've tried rebooting into recovery (Power + down) doesn't do anything, however, {Power + down} then finger off power then {Power + down} again takes me to "factory reset" option, if done so the phone just hangs and removing battery on way to take it back to fastboot on pc, or bootloop again.
I've done the following steps using [LG-H901] Stock .img Files (Boot, System, and Recovery)
Code:
fastboot flash system system.img
then
fastboot flash boot boot.img
and finally
fastboot flash recovery recovery.img
I've tried booting the phone and still gets me stuck on bootloop, and doing the same {Power + down} gets to the same "factory reset" option only then freezes my phone if I agree to do so.
Is there something I've done wrong or incorrect? I will provide as much info as requested.
Thanks guys!
Update: Phone booted up to lockscreen after finishing "Android is starting..." procedures, then kept bootlooping and it is now doing "Android is starting.." procedures again. I'll keep it updated if it keeps doing so or anything of the sort.
Did you reply YES when trying to enter recovery? It will ask 2 times and bith times answer YES ... And if you DO have TWRP installed it will boot into twrp recovery.
Double0EK said:
Did you reply YES when trying to enter recovery? It will ask 2 times and bith times answer YES ... And if you DO have TWRP installed it will boot into twrp recovery.
Click to expand...
Click to collapse
This is the weirdest thing, phone worked for a bit then shuts off and does the same thing. all files and everyhing was in tact. ANy main reason behind this? I am desperate not to delete everything because i have important photos on there that were still there when it re-started again right now.
So to recap: At the moment doing the {factory reset} got me as far as using phone for like 2 minutes before ****ting out and sending me on a bootloop yet again.
Important Questions:
On all my other devices I am able to connect via usb and read devices, but on this phone I get the message when connecting to my computer "LGE Android MTP Device: Failed" whats this about?
Is there any way to save internal photo album images other than getting this to boot up and pray it stays on long enough to transfer data?
UPDATE 2: Phone has booted up and not froze (yet)? Testing to see if it will keep working so far so good. Unfortunately all my **** was deleted which bummed me out, would have honestly prefered to lose a $600 phone than all the family, friend, ext photos I had on my phone I made the huge mistake of saving to internal memory and never backing up. Smh.
Update 3: Phone is back at it again with the bootloop. I have no idea what is wrong, I've repeated the steps twice and phone doesn't seem to let up. It's fine until I hit that restart or shutdown button then it goes into bootloop heaven. I'm guessing this phone is done for? On an unrelated note it did fall on me, but worked fine afterwards, it was just sudden when it started doing this. Unless anyone has more suggestions I'd be glad to hear them. As of right now, this phone is toast.
You tube how to bake phones in the oven.
It could fix some potentially loose solders..or since everything was already wiped you should get a warranty replacement.. Should still be under factory warranty.
Double0EK said:
You tube how to bake phones in the oven.
It could fix some potentially loose solders..or since everything was already wiped you should get a warranty replacement.. Should still be under factory warranty.
Click to expand...
Click to collapse
I am thinking the warranty route. Is there anything specific I should do before doing so? I hear having "fastboot oem unlock" {Bootloader Unlocked} voids the warranty. Is this true that you might know of? Either way thanks I appreciate the information.
Sorry so late..
But you can try to fastboot oem lock it.

Categories

Resources