Hi !
Have ****** up my phone bootloader.
When connecting through usb it shows " Zeus Flash Device ".
Have tried other usb ports and run as administrator through Win XP.
Reinstalled XP and downloaded se companion and no luck.
For my bad i didnt make any backup.Omnius showing that
Code:
Action journal
15:58:04 Identify
15:58:04 Shows detailed information about the connected phone.
15:58:04 Operating system: Microsoft Windows XP Professional Service Pack 3 (build 2600)
15:58:04 Application version: 0.37.4575
15:58:04 . The action name is 'Identification'
15:58:04 Selected phone type: ST15
15:58:04 Selected connection method: USB ROM
15:58:04 i Instructions
15:58:04 i 1. Make sure the phone battery is charged to at least 50%.
15:58:04 i 2. Switch off the phone!
15:58:04 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
15:58:04 i 4. Connect the testpoint to phone's ground (battery negative pole, metallic circuit shielding, GND) and leave it connected!
15:58:04 i 5. Shortly press the power button!
15:58:04 i 6. Disconnect the testpoint!
15:58:04 i 7. Connect the cable to the phone!
15:58:04 [picture]
15:58:04 . The action started waiting for the user
15:58:13 . The action finished waiting for the user
15:58:13 Connecting via Zeus USB Flash Device (USB4)...
15:58:13 Device driver version: 2.2.0.5
15:58:13 Qualcomm ROM ID: 06010100900000
15:58:13 Sending loader...
15:58:14 Waiting for loader response...
15:58:14 . The action started waiting for the user
15:58:15 . The action finished waiting for the user
15:58:15 Connecting via SEMC USB Flash Device (USB4)...
15:58:15 Device driver version: 2.2.0.5
15:58:15 Detected chipset: MSM7X30
15:58:15 Boot mode: ROM
15:58:15 Device ID: 52E24E9680E5A984239268E08CE9C5DFC6B5CA90
15:58:15 Minimum loader AID: 0001
15:58:15 Phone rooting status is unknown.
15:58:15 i Unsigned flashing is disabled.
15:58:15 Sending loader...
15:58:15 Waiting for loader response...
Additional details
---
2F B4 6E 69 5C EB 9C F5 36 FD 40 C1 3A DB D8 84
D9 94
---
S1TOOL is showing that
Code:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
PROCESSING ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_LOADER VER "R4A062"
LOADER AID: 0001
can't get S1 command header
LOADER NOT RESPONDING
Elapsed:55 secs.
Sry for my english !
I ve the answer:
After remov tespoint, insert the batterie and click on test point ready
Related
I bought a second hand x10i, not knowing that they put in the unlocking code too many times! (SIM lock Network 0)
Allready flashed the SE with another rom, but like I allready found on xda, that is not the sollution for any lock.
Who can help me????
u got phone locked or sim locked...??
Z3US911 said:
u got phone locked or sim locked...??
Click to expand...
Click to collapse
It is simlocked... But I don't know what kind of provider.
Flashing other software doensn't helped and I'm afraid that I bought something useless now. (except for parts)
No local area unlocking service can help me, they all say it's hardlocked.(putting the unlockcode too many times) But there has to be some way, or....???
mike20112 said:
It is simlocked... But I don't know what kind of provider.
Flashing other software doensn't helped and I'm afraid that I bought something useless now. (except for parts)
No local area unlocking service can help me, they all say it's hardlocked.(putting the unlockcode too many times) But there has to be some way, or....???
Click to expand...
Click to collapse
Omnius:
Action journal
17:17:32 Identify
17:17:32 Shows detailed information about the connected phone.
17:17:32 Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 1 (build 6001), 32-bit
17:17:32 Application version: 0.20.3728 (beta)
17:17:32 . The action name is 'Identification'
17:17:32 Selected phone type: Xperia™ X10
17:17:32 Selected connection method: USB EROM
17:17:32 i Instructions
17:17:32 i 1. Make sure the phone battery is charged to at least 50%.
17:17:32 i 2. Switch off the phone!
17:17:32 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
17:17:32 i 4. Press and hold the return back button, then connect the cable to the phone!
17:17:32 . The action started waiting for the user
17:17:56 . The action finished waiting for the user
17:17:56 Connecting via SEMC USB Flash Device (USB5)...
17:17:56 Device driver version: 2.2.0.5
17:17:56 Detected chipset: QSD8250
17:17:56 Boot mode: EROM
17:17:56 EROM version: 1226-2253 R8A013
17:17:56 IMEI: 35941903056964
17:17:56 Device ID: BE70549D23DBAA05C58C43921042EA140C2AE6E0
17:17:56 Minimum loader AID: 0001
17:17:57 Minimum software AID: 0001
17:17:57 Minimum EROM AID: 0001
17:17:57 Minimum customization AID: 0001
17:17:57 Minimum simlock AID: 0001
17:17:57 Serial number: CB511GMQT6
17:17:57 Color: Red SEMC
17:17:57 Phone model (from TA): X10i
17:17:57 Current CXC (from TA): 1227-4612_2.1.A.0.435
17:17:57 Current CDA (from TA): 1232-9897_R8B
17:17:57 Current FS (from TA): WORLD-1-4-8_2.1.A.0.435
17:17:57 Network lock: 20408-*, 20412-*
17:17:57 Sending loader...
17:17:57 Waiting for loader response...
17:18:01 Flash chip ID: 002C-00B3
17:18:01 Memory card present: 8GB
17:18:01 Turning off the phone...
17:18:03 i Please disconnect battery and cable from the phone!
17:18:03 s Successfully done.
17:18:03 . The action entered shutdown phase
17:18:03 . The action reported success
Additional details
---
35 EF BA 94 4B 2A 9D 10 B1 78 4F 8C 43 4A C7 9C
79 1C
---
[/code]
Flashed it again, now to gingerbread.... Still that hardlock. Does anyone know if it's possible to do a bypass or something???
Action journal
05:33:01 Identify
05:33:01 Shows detailed information about the connected phone.
05:33:01 Operating system: Microsoft Windows Vista Home Premium Edition Service Pack 1 (build 6001), 32-bit
05:33:01 Application version: 0.20.3728 (beta)
05:33:01 . The action name is 'Identification'
05:33:01 Selected phone type: Xperia™ X10
05:33:01 Selected connection method: USB EROM
05:33:01 i Instructions
05:33:01 i 1. Make sure the phone battery is charged to at least 50%.
05:33:01 i 2. Switch off the phone!
05:33:01 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
05:33:01 i 4. Press and hold the return back button, then connect the cable to the phone!
05:33:01 . The action started waiting for the user
05:33:52 . The action finished waiting for the user
05:33:52 Connecting via SEMC USB Flash Device (USB5)...
05:33:52 Device driver version: 2.2.0.5
05:33:52 Detected chipset: QSD8250
05:33:52 Boot mode: EROM
05:33:52 EROM version: 1226-2253 R8A013
05:33:53 IMEI: 35941903056964
05:33:53 Device ID: BE70549D23DBAA05C58C43921042EA140C2AE6E0
05:33:53 Minimum loader AID: 0001
05:33:53 Minimum software AID: 0001
05:33:53 Minimum EROM AID: 0001
05:33:53 Minimum customization AID: 0001
05:33:53 Minimum simlock AID: 0001
05:33:53 Serial number: CB511GMQT6
05:33:53 Color: Red SEMC
05:33:53 Phone model (from TA): X10i
05:33:53 Current CXC (from TA): 1227-4612_3.0.1.G.0.75
05:33:53 Current CDA (from TA): 1241-1846_R1C
05:33:53 Current FS (from TA): WORLD-1-4-8_3.0.1.G.0.75
05:33:53 Network lock: 20408-*, 20412-*
05:33:53 Sending loader...
05:33:53 Waiting for loader response...
05:33:54 Flash chip ID: 002C-00B3
05:33:54 Turning off the phone...
05:33:56 i Please disconnect battery and cable from the phone!
05:33:56 s Successfully done.
05:33:56 . The action entered shutdown phase
05:33:57 . The action reported success
Additional details
---
35 EF BA 94 4B 2A 9D 10 B1 78 4F 8C 43 4A C7 9C
79 1C
---
[/code]
Hello everyone, I hope you can help me here:
I think some moron has bricked this beautiful X10a and it won't boot however its still goes in to flash mode.
Long story short:here is what I have done so far after many hours digging through this forum :
1. Swapped the battery from working X10 (got 3 original X10 batteries)
2. Left the phone plugged to charger for 10 hours (got two original SE wall chargers)
3. Screen has been tested and it works (I've used donor X10).
4. Flashed firmware (1.6 + 2.1 + 2.3.3 & baseband according to compatibility chart) with latest FlashTool.
5. Attempted to repair firmware via SEUS with no luck (software is up to date). Lunched SEUS&Companion from different PC with same results.
I think the firmware got stuck somehow at the Flash chip, see Omnius dump below:
Code:
Action journal
09:24:23 Identify
09:24:23 Shows detailed information about the connected phone.
09:24:23 Operating system: Microsoft Windows XP Professional Service Pack 2 (build 2600)
09:24:23 Application version: 0.23.3995
09:24:23 . The action name is 'Identification'
09:24:23 Selected phone type: Xperia™ X10
09:24:23 Selected connection method: USB EROM
09:24:23 i Instructions
09:24:23 i 1. Make sure the phone battery is charged to at least 50%.
09:24:23 i 2. Switch off the phone!
09:24:23 i 3. Remove the phone battery and wait at least 5 seconds before reinserting it!
09:24:23 i 4. Press and hold the return back button, then connect the cable to the phone!
09:24:23 . The action started waiting for the user
09:24:38 . The action finished waiting for the user
09:24:38 Connecting via SEMC USB Flash Device (USB2)...
09:24:38 Device driver version: 2.2.0.5
09:24:38 Detected chipset: QSD8250
09:24:38 Boot mode: EROM
09:24:38 EROM version: 1226-2253 R8A013
09:24:38 IMEI: 359XXXXXXXXXX
09:24:38 Device ID: 63D7E28330CE580224E502FB63A7366DBBA404A0
09:24:38 Minimum loader AID: 0001
09:24:38 Minimum software AID: 0001
09:24:38 Minimum EROM AID: 0001
09:24:38 Minimum customization AID: 0001
09:24:38 Minimum simlock AID: 0001
09:24:38 Serial number: CB511LLKW7
09:24:38 Color: Red SEMC
09:24:38 Phone model (from TA): X10a
09:24:38 Current CXC (from TA): [COLOR="red"]1227-4612_3.0.1.G.0.75[/COLOR]
09:24:38 Current CDA (from TA): 1234-4820_R5B
09:24:38 Current FS (from TA): [COLOR="Red"]WORLD-1-2-5-6_2.1.A.0.435[/COLOR]
09:24:38 The phone is not locked to a network.
09:24:38 Sending loader...
09:24:38 Waiting for loader response...
09:24:39 Flash chip ID: 002C-00B3
09:24:39 Turning off the phone...
09:24:41 i Please disconnect battery and cable from the phone!
09:24:41 s Successfully done.
09:24:42 . The action entered shutdown phase
09:24:42 . The action reported success
Additional details
---
35 EF BA 94 4B 2A 9D 10 B1 78 4F 8C 43 4A C7 9C
79 1C
---
please let me know if this baby can be cured, or its absolutely dead .....
thanks, brutus*
Need x10 mini SEMC Driver for windows 7 x64
Installed sony companion! and no driver
help!
18/020/2011 01:20:16 - INFO - Searching Xperia....
18/020/2011 01:20:16 - INFO - Found at USB\VID_0FCE&PID_ADDE\5&11CE2340&0&8
18/020/2011 01:20:16 - INFO - Start Flashing
18/020/2011 01:20:16 - INFO - VER="R8A029";DATE="20100601";TIME="12:17:00";
8/020/2011 01:20:16 - INFO - Flashing loader
18/020/2011 01:20:16 - ERROR - Error flashing. Aborted
18/020/2011 01:20:16 - INFO - Now unplug the device and power it on
18/020/2011 01:20:16 - INFO - Then go to application settings
18/020/2011 01:20:16 - INFO - turn on Unknown Sources and Debugging
Welcome to S1 identify tool
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
PROCEDURE STOPPED BY USER
Elapsed:6 secs.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Xperia Mini,E15 Xperia X8,U20 Xperia Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A029"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): E10i
SOFTWARE VERSION: 1235-3408_2.1.1.A.0.6
CUSTOM VERSION: 1236-0516_R5B
FILESYSTEM VERSION: WORLD-1-8_2.1.1.C.0.0
SERIAL NO: BY9008T2YR
SEMC SIMLOCK CERTIFICATE
Elapsed:8 secs.
If your using a flash tool, you need to install gordens gate driver that comes with the flash tool.
Sent from my U20i using xda premium
I'm also using windows7 64bit, got no problem with SEMC driver, got it from SEUS and the driver install it self when doing "turn-off, press back button, plug-in usb" sequence for the first time.
same as here too, what step2 do i need to do, thank you ;')
hey guys i really need help. it been almost 4 months since i had this problem and until now i cant fix it. i unlocked the simnetwor by omnius se software and it worked great then i unlocked BL and then i just lost network signal. i have tried lots of sim cards with other networks and its still the same with all NO NETWORK or cant sign into selected network so now i get the phone info by omnius and it shows me that which is really annoying me ...
read the line before simlock rigin:
Code:
Action journal
22:06:00 Identify
22:06:00 Shows detailed information about the connected phone.
22:06:00 Operating system: Microsoft Windows 7 Ultimate Edition Service Pack 1 (build 7601), 32-bit
22:06:00 Application version: 1.38.4753
22:06:00 . The action name is 'Identification'
22:06:00 Selected phone type: Xperia™ X10
22:06:00 Selected connection method: USB EROM
22:06:00 i Instructions
22:06:00 i 1. Make sure the phone battery is charged to at least 50%.
22:06:00 i 2. Switch off the phone!
22:06:00 i 3. Remove the phone battery and wait at least 5 seconds, then insert the battery back to the phone!
22:06:00 i 4. Press and hold the return back button, then connect the cable to the phone!
22:06:00 . The action started waiting for the user
22:06:06 . The action finished waiting for the user
22:06:06 Connecting via SEMC USB Flash Device (USB1)...
22:06:06 Device driver version: 2.2.0.5
22:06:06 Detected chipset: QSD8250
22:06:06 Boot mode: EROM
22:06:06 EROM version: 1226-2253 R8A033
22:06:06 IMEI: 01259000518403
22:06:06 Device ID: 2C1EC52657B7CD4B02ADE7033B9E9D9AB2A66233
22:06:06 Minimum loader AID: 0001
22:06:06 Minimum software AID: 0001
22:06:06 Minimum EROM AID: 0001
22:06:06 Minimum customization AID: 0001
22:06:06 Minimum simlock AID: 0001
22:06:06 Serial number: CB511TB9A3
22:06:06 Color: Red SEMC
22:06:06 Phone model (from TA): X10i
22:06:06 Current CXC (from TA): 1227-4612_3.0.1.G.0.75
22:06:06 Current CDA (from TA): 1241-1846_R1C
22:06:06 Current FS (from TA): WORLD-1-4-8_6.0.B.0.743
22:06:06 i >>>>>>>>The phone is not locked to a network<<<<<<<<<<
22:06:06 i Simlock origin: Omnius
22:06:06 Sending loader...
22:06:06 Waiting for loader response...
22:06:08 Flash chip ID: 002C-00B3
22:06:08 Memory card present: 8GB
22:06:08 Turning off the phone...
22:06:10 i Please disconnect battery and cable from the phone!
22:06:10 s Successfully done.
22:06:10 . The action entered shutdown phase
22:06:10 . The action reported success
so please guys can anyone help me?
thanks
This known issue for some users/devices, perhaps below similar topic could help :
http://forum.xda-developers.com/showthread.php?t=1338459
FYI
Regards
Bares said:
This known issue for some users/devices, perhaps below similar topic could help :
http://forum.xda-developers.com/showthread.php?t=1338459
FYI
Regards
Click to expand...
Click to collapse
thanks man i found out that nothing will work with me because i simunlocked phone with omnius so i have to unlock the Bootloader with omnius too and that what i did 5 h ago and its working great.. thanks for your replay... btw if anyone read this post and did what i did.
DO NOT FLASH ANYTHING TO YOUR PHONE USING FLASHTOOL, USE OMNIUS FOR IT AND ITS FREE ANYWAY TO FLASH STUFF... if u used flashtool, u will lose your signal again ..
MooDy
I have using custom firmwares for few months.. Lastly I was using MiniCM9-3.0.4.. When I was using the phone the suddenly went blank.. After few mins the screen was ok and then within a minute again it went blank.. I removed and inserted the battery and switched on the phone.. The phone vibrated and the lcd light came.. the mobile restarts and then the same thing happens.. Note: the notification led light does not show.. I used sony update service but it dint work out.. Is there any solution?
S1 Tool Result:
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A028"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): U20i
SOFTWARE VERSION: 1235-3411_2.1.1.A.0.6
CUSTOM VERSION: 1240-8044_R5B
FILESYSTEM VERSION: WORLD-1-8_2.1.1.A.0.6
SERIAL NO: CB511Q62FS
SEMC SIMLOCK CERTIFICATE
Elapsed:9 secs.
Wait.. Your bootloader is locked.
First, download Sony Update Service and repair your phone
Then, re-root and unlock bootloader as described here: http://forum.xda-developers.com/showthread.php?t=1254225
Happy Holidays!
pongnamu said:
Wait.. Your bootloader is locked.
First, download Sony Update Service and repair your phone
Then, re-root and unlock bootloader as described here: http://forum.xda-developers.com/showthread.php?t=1254225
Happy Holidays!
Click to expand...
Click to collapse
He did the repair, didn't you notice? The S1Tool output even states he's running 2.1.1.A.0.6. (Which, by the way, does not relock the bootloader. Although it may display the capital 'R' again after a repair, you can still flash custom kernels.)
Maybe he should let the phone charge overnight and try again.
Flashtool error msg:
26/049/2012 06:49:35 - INFO - Device connected in flash mode
26/049/2012 06:49:48 - INFO - Selected U20_nAa-14_2.6.29.6-nAa-14.ftf
26/049/2012 06:49:48 - INFO - Preparing files for flashing
26/049/2012 06:49:48 - INFO - Please connect your device into flashmode.
26/049/2012 06:49:49 - INFO - Opening device for R/W
26/049/2012 06:49:49 - INFO - Reading device information
26/049/2012 06:49:49 - INFO - Unable to read from phone after having opened it.
26/049/2012 06:49:49 - INFO - trying to continue anyway
26/049/2012 06:49:49 - INFO - Start Flashing
26/049/2012 06:49:49 - INFO - Processing loader
26/049/2012 06:49:49 - INFO - Checking header
26/049/2012 06:49:49 - INFO - Ending flash session
26/049/2012 06:49:49 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
26/049/2012 06:49:49 - ERROR - Error flashing. Aborted
SmG67 said:
He did the repair, didn't you notice? The S1Tool output even states he's running 2.1.1.A.0.6. (Which, by the way, does not relock the bootloader. Although it may display the capital 'R' again after a repair, you can still flash custom kernels.)
Maybe he should let the phone charge overnight and try again.
Click to expand...
Click to collapse
n.santhanakrishnan said:
Flashtool error msg:
...
26/049/2012 06:49:49 - INFO - Start Flashing
26/049/2012 06:49:49 - INFO - Processing loader
26/049/2012 06:49:49 - INFO - Checking header
26/049/2012 06:49:49 - INFO - Ending flash session
26/049/2012 06:49:49 - ERROR - Error in processHeader : 995 : The I/O operation has been aborted because of either a thread exit or an application request.
26/049/2012 06:49:49 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
hmm, ok, maybe your bootloader got locked again, but that usually does not happen.
Download this, it's stock 2.1 firmware, flashable with flashtool on a locked bootloader.
If it makes your phone work, unlock the bootloader again and continue.
I flashed it but it does not help.. B/w I think its not 2.1 but 2.0 S1Tool Results after flashing
Welcome to S1 tool.
That is small and crippled subset of SETOOL2 service tool.
TO CONNECT NEXT PHONES
X10 Xperia,E10 Mini,E15 Xperia X8,U20 Mini Pro
LT15 Xperia ARC,MT15 Xperia NEO,R800 Xperia PLAY
PRESS AND HOLD "BACK" BUTTON...
ST18 Xperia RAY,ST15 Xperia Mini,SK17 Xperia Mini Pro
PRESS AND HOLD "Volume Down" BUTTON...
PLEASE ATTACH TURNED OFF PHONE NOW
RUNNING S1_EROM VER "R8A028"
SOFTWARE AID: 0001
LOADER AID: 0001
FLASH ID: "00EC/00BC"
LOADER VERSION: "R4A045"
MODEL (from GDFS): U20i
SOFTWARE VERSION: 1235-3411_2.0.A.0.504
CUSTOM VERSION: 1238-0199_R3B
FILESYSTEM VERSION: WORLD-1-8_2.0.A.0.504
SERIAL NO: CB511Q62FS
SEMC SIMLOCK CERTIFICATE
Elapsed:20 secs.