I have installed Hdrog3n ICS and for most of the apps in market it shows not compatible...
what shld i do?
sunny_ag said:
I have installed Hdrog3n ICS and for most of the apps in market it shows not compatible...
what shld i do?
Click to expand...
Click to collapse
have u changed ur DPI? since std dpi is 240 and anything below most apps do not recognise it hence revert back to 240dpi
if its std 240 dpi then delete ur google a/c then reboot and setup ur a/c afresh and see
Sun90 said:
have u changed ur DPI? since std dpi is 240 and anything below most apps do not recognise it hence revert back to 240dpi
if its std 240 dpi then delete ur google a/c then reboot and setup ur a/c afresh and see
Click to expand...
Click to collapse
i have changed it to 240 dpi, but the market still says incompatible app
sunny_ag said:
i have changed it to 240 dpi, but the market still says incompatible app
Click to expand...
Click to collapse
delete the play store data and cache reboot and check also try 2 delete ur a/c and sett it afresh and check
thanks buddy that helped...
sunny_ag said:
thanks buddy that helped...
Click to expand...
Click to collapse
ur welcome ma8 u can pm me for any issues
sunny_ag said:
I have installed Hdrog3n ICS and for most of the apps in market it shows not compatible...
what shld i do?
Click to expand...
Click to collapse
its because you changed Density..
LCD density modder pro will help if you too hard for you to follow manual steps.
safepacket said:
its because you changed Density..
LCD density modder pro will help if you too hard for you to follow manual steps.
Click to expand...
Click to collapse
Reading comprehension fail.
Related
is there Anyway 2 change the Screen resolution permanently ??
i tried a couple of apps .. it only changes the resolution till the Boot .
and it actually Boots after every time i change the resolution " density " of the phone ...
...
hope u guys gimme some good useful Adviced about that ..
one more thing ..
i need the files of the firmware .24 so i can flash my phone 2 them ..
.6 sucks .. ;\ ..
Cheers ..
Hey (;
If you wanna change your density just edit /system -> build.prop in root explorer and change the density value..
To complete this, do a restart and everything is fine for u
Sent from my X10mini Pro using XDA App
kvNN_ said:
Hey (;
If you wanna change your density just edit /system -> build.prop in root explorer and change the density value..
To complete this, do a restart and everything is fine for u
Sent from my X10mini Pro using XDA App
Click to expand...
Click to collapse
THANK U MAN !! ..
that worked like CHARM .. o.o ..
oh damn it .. i posted this Thread in the Wrong section =S ..
..
THANKS AGAIN !! .. ;D
Sira. said:
THANK U MAN !! ..
that worked like CHARM .. o.o ..
oh damn it .. i posted this Thread in the Wrong section =S ..
..
THANKS AGAIN !! .. ;D
Click to expand...
Click to collapse
its work for me but no statusbar..pliz help me
azadtaufiq said:
its work for me but no statusbar..pliz help me
Click to expand...
Click to collapse
Hey guys root tools allows you to change the lcd density with a click of a button but the only thing is it doesnt yet support our small density value (110/120). But as was mentioned a few posts back just edit it in the build.prop for now.
The only two values you should use are 110 and 120. Anything higher and you may not be able to change it back with ease. Anything lower wont be too bad, but, if you put it too low then it may become too small to read.
I had this smae problem a few weeks back. I changed mine on purpose to see what happens and it wasnt good. Screen went so big i had to pull the build.prop using adb and then push it back to the phone again. It took me ages to figure out what it was originally set to.
Cheers,
evilbarcode.
hi everyone...Even though i have enough free space on my phone i cannot install applications anymore. it tells me that there is not enough free space. i am using criskelo coustom rom in my phone(gt-i9300). Could any one know what is the problem.?? please healp..
mukhia said:
hi everyone...Even though i have enough free space on my phone i cannot install applications anymore. it tells me that there is not enough free space. i am using criskelo coustom rom in my phone(gt-i9300). Could any one know what is the problem.?? please healp..
Click to expand...
Click to collapse
Clear Google play cache under all programs
Casanoaa said:
Clear Google play cache under all programs
Click to expand...
Click to collapse
i did try that....but the same problem ocures...i even tried installing apps from sg3 toolkit and it dosent work either....is there any other ways? and thank you for ur reply..!
mukhia said:
i did try that....but the same problem ocures...i even tried installing apps from sg3 toolkit and it dosent work either....is there any other ways? and thank you for ur reply..!
Click to expand...
Click to collapse
try also to clear
Google services framework and google play cache and reboot
it did work for me
Casanoaa said:
try also to clear
Google services framework and google play cache and reboot
it did work for me
Click to expand...
Click to collapse
It is still now working....do u know any other ultimate options..?
mukhia said:
It is still now working....do u know any other ultimate options..?
Click to expand...
Click to collapse
hmm yes to do a factory reset. But how did this problem happen to you?
Cos he tried to patch devs apps. They work very hard to bring u there work
How to fix? Don't rip them off!
Sent from my GT-I9300 using xda premium
Boot to recovery wipe cache advanced wipe dalvik fix permissions .
Or factory reset .
Even better restore Nandroid backup .
jje
Casanoaa said:
hmm yes to do a factory reset. But how did this problem happen to you?
Click to expand...
Click to collapse
well before factory resst ,i forgot to tell u that i can now download and install apps from play store...but while manuly installing apps using packeg installer and through sg3 toolkit the same thing happens again ... dose it make ne sense to u? and the problem occured while updating apex launcher from web..! thank u for ur help..!!
mukhia said:
well before factory resst ,i forgot to tell u that i can now download and install apps from play store...but while manuly installing apps using packeg installer and through sg3 toolkit the same thing happens again ... dose it make ne sense to u? and the problem occured while updating apex launcher from web..! thank u for ur help..!!
Click to expand...
Click to collapse
No i haven't done the same but no problem. Press thanks button if i have helped
Sorry for writing here but I am not authorized to write in the same post. I hope I could be able in near future
I need to know how to root the new MIUI 2.8.3 ?
Thanks for every one worked on it
Regards
sherifaly said:
Sorry for writing here but I am not authorized to write in the same post. I hope I could be able in near future
I need to know how to root the new MIUI 2.8.3 ?
Thanks for every one worked on it
Regards
Click to expand...
Click to collapse
is there any application that called superuser or supersu ?
On the home screen you will see tools folder, open it then find permission (the icon like paper script) open that then choose manage root permission
Sent from my PC36100 using Tapatalk 2
nom051205 said:
On the home screen you will see tools folder, open it then find permission (the icon like paper script) open that then choose manage root permission
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
I did that but it doesnt work , Also I flashed the superuser in this thread http://forum.xda-developers.com/showthread.php?t=997581
It always says superuser deny the apps.
Also regaridng battery I see you mention that it stays for only 5 hours , it stays with me for 20 hours with regular conditions & I am using battery deffender.
If I have any other comments I will mention it but we must root it
Again thanks for the good job
This rom is already pre-rooted no need to flash any thing as we generally do in stock roms.......
I think you have flashed some superuser.....so i think you need to re- flash the rom-(***do make a clean rom flash asper rom developer***)
Now after rom instal just instal root explorer......
Now as soon as u open root explorer a menu popup will apear it is just like superuser pop up ...(only the diffrence is this pop up will apear for 20sec...and contains so many warning message all u need to click next every time) (****refer attached images ****)
After this step you can see root folder .....
For every application which asks for root permission. U need to do this .....
Adi.
sherifaly said:
I did that but it doesnt work , Also I flashed the superuser in this thread http://forum.xda-developers.com/showthread.php?t=997581
It always says superuser deny the apps.
Also regaridng battery I see you mention that it stays for only 5 hours , it stays with me for 20 hours with regular conditions & I am using battery deffender.
If I have any other comments I will mention it but we must root it
Again thanks for the good job
Click to expand...
Click to collapse
Now that weird, I have no issue with su on mine, maybe you should reflash the rom?
Sent from my PC36100 using Tapatalk 2
nom051205 said:
Now that weird, I have no issue with su on mine, maybe you should reflash the rom?
Sent from my PC36100 using Tapatalk 2
Click to expand...
Click to collapse
I followed what jyeshta001 mentioned and it goes fine with me.
The point now that the screen turnes with some colors ( you can enter VPN and you will see it ). also it is very laggy and it make many restarts. aslo headset problem still exists,the automatic brightness & buttons lighting during press on it.
I have a question abour RAM as most of time it works with 100MB free only ( can we make any thing with that )
Finally Thanks to jyeshta001 for his replay.
Thanks to nom051205 for the rom and we hope to see further development
I have some time to support but I dont have any experince in roms editing so if you can advice with some links I could support.
Best regards
sherifaly said:
I followed what jyeshta001 mentioned and it goes fine with me.
The point now that the screen turnes with some colors ( you can enter VPN and you will see it ). also it is very laggy and it make many restarts. aslo headset problem still exists,the automatic brightness & buttons lighting during press on it.
I have a question abour RAM as most of time it works with 100MB free only ( can we make any thing with that )
(QUOTE=sherifaly;32178538)
Use rom tool box pro / a strong startup manager so that u can control unwanted application running form the begining for startup.....
For head set one use a wedget called "toggle to head set" from playstore.
For lagness use any CPU tool like set CPU and set frequency as "1xx to 1xxx " and the governor to "on demand" (but drains battery)
For button lights "root dim " aPK. Will help u to some extend ......
For random colours on screen we will have to w8 "Nom bro" will bring a patch ....soon .....
Adi!™
Click to expand...
Click to collapse
jyeshta001 said:
sherifaly said:
I followed what jyeshta001 mentioned and it goes fine with me.
The point now that the screen turnes with some colors ( you can enter VPN and you will see it ). also it is very laggy and it make many restarts. aslo headset problem still exists,the automatic brightness & buttons lighting during press on it.
I have a question abour RAM as most of time it works with 100MB free only ( can we make any thing with that )
(QUOTE=sherifaly;32178538)
Use rom tool box pro / a strong startup manager so that u can control unwanted application running form the begining for startup.....
For head set one use a wedget called "toggle to head set" from playstore.
For lagness use any CPU tool like set CPU and set frequency as "1xx to 1xxx " and the governor to "on demand" (but drains battery)
For button lights "root dim " aPK. Will help u to some extend ......
For random colours on screen we will have to w8 "Nom bro" will bring a patch ....soon .....
Adi!™
Click to expand...
Click to collapse
Thanks my friend I will try all
But now the market is mentioning the device is not compatible with this app , what shall I do ??? knowing that I changed the resoluation to 180 DPI.
Thanks in advance
Click to expand...
Click to collapse
sherifaly said:
jyeshta001 said:
Thanks my friend I will try all
But now the market is mentioning the device is not compatible with this app , what shall I do ??? knowing that I changed the resoluation to 180 DPI.
Thanks in advance
Click to expand...
Click to collapse
Open the build.prop(this file is in system folder) in text editor of root explorer and add following lines at the end of build prop page ...
ro.product.model=GT-N7000
ro.product.manufacturer=samsung
Then save &exit ....after that you should do a reboot.
Now check ur market compatability .... if this is not working then change the model number and manufacture name to some other one..... on above lines....
Give us the feedback if it is not working.....ok
Adi™
Click to expand...
Click to collapse
jyeshta001 said:
sherifaly said:
Open the build.prop(this file is in system folder) in text editor of root explorer and add following lines at the end of build prop page ...
ro.product.model=GT-N7000
ro.product.manufacturer=samsung
Then save &exit ....after that you should do a reboot.
Now check ur market compatability .... if this is not working then change the model number and manufacture name to some other one..... on above lines....
Give us the feedback if it is not working.....ok
Adi™
Click to expand...
Click to collapse
Thanks again my friend it works fine.
I will check the mentioned progarms & give my feed back.
Best regards
Click to expand...
Click to collapse
sherifaly said:
jyeshta001 said:
Thanks again my friend it works fine.
I will check the mentioned progarms & give my feed back.
Best regards
Click to expand...
Click to collapse
Regarding market also LCD density modder pro willl solve the problem
New problem appears , Viber & Tango are not working after searching I found some body mentioned a problems with mic ( in custom roms)
Any ideaes about that
Click to expand...
Click to collapse
sherifaly said:
sherifaly said:
Regarding market also LCD density modder pro willl solve the problem
New problem appears , Viber & Tango are not working after searching I found some body mentioned a problems with mic ( in custom roms)
Any ideaes about that
Click to expand...
Click to collapse
yes viber, tango, skype not working only on those custom roms which are based on 2.3.7 and also all ics roms
Click to expand...
Click to collapse
citric_acid said:
sherifaly said:
yes viber, tango, skype not working only on those custom roms which are based on 2.3.7 and also all ics roms
Click to expand...
Click to collapse
who says skype not working? you better search carefully... there are workaround for 2.3.7 already...
Click to expand...
Click to collapse
deysmacro said:
citric_acid said:
who says skype not working? you better search carefully... there are workaround for 2.3.7 already...
Click to expand...
Click to collapse
okay, so did you try that trick, i think after trying you shouldn't have said that, even though what about those who does'nt want to credit there accounts, also ive mentioned about 4.0.4 roms, i know that they won't work on them since they're still on development stage so its better to stay on 2.3.3 for frequent voiper's
Click to expand...
Click to collapse
citric_acid said:
deysmacro said:
okay, so did you try that trick, i think after trying you shouldn't have said that, even though what about those who does'nt want to credit there accounts, also ive mentioned about 4.0.4 roms, i know that they won't work on them since they're still on development stage so its better to stay on 2.3.3 for frequent voiper's
Click to expand...
Click to collapse
Yes also viber is orking in 2.3.7 I tries it in Longhorn & others
Click to expand...
Click to collapse
hi guy
can help me with this problem
look the video
http://www.gulfup.com/?U3FhlZ
I can't watch your video. You shoud upload to youtube
ok
ok dear
http://youtu.be/cJm2D3Fa5H4
mimoun103 said:
hi guy
can help me with this problem
look the video
http://www.gulfup.com/?U3FhlZ
Click to expand...
Click to collapse
you've changed your DPI and are running tablet mode.
Change it back to stock. or if you are not sure how you got here, then install an app that changed DPI and change it to the stock Xperia ZU dpi.
Stock = 320 DPI
ok
hamdogg said:
you've changed your DPI and are running tablet mode.
Change it back to stock. or if you are not sure how you got here, then install an app that changed DPI and change it to the stock Xperia ZU dpi.
Stock = 320 DPI
Click to expand...
Click to collapse
when i changed it to stock. the navigation bar disappeared
mimoun103 said:
when i changed it to stock. the navigation bar disappeared
Click to expand...
Click to collapse
some setting isn't working. Reflash the FTF and then jacki's kernel to obtain root. Thats the best way to get it brand new
ok
hamdogg said:
some setting isn't working. Reflash the FTF and then jacki's kernel to obtain root. Thats the best way to get it brand new
Click to expand...
Click to collapse
thanks dear
ilove tablet mod
but no chance to get it in kitkat
closed for being a duplicate
Ok so basically i was changing dpi, doing some cganges xmiui and then i found a veru stubbon probs that wont go at any cost!! So what is that the launcher icons have another small weird thing and the icons themselves are weird. Check out the video and the screen shoots and please tell me how to fix it..
https://youtu.be/69g6Cor9K18
You changed dpi with dpi changer app?
You must change in build.prop
And change or add line ro.sf.lcd_density=420
Denis:) said:
You changed dpi with dpi changer app?
You must change in build.prop
And change or add line ro.sf.lcd_density=420
Click to expand...
Click to collapse
Root essentials shell command mode
Androbots said:
Root essentials shell command mode
Click to expand...
Click to collapse
Have you tried my method?
It works nkw?
Denis:) said:
Have you tried my method?
It works nkw?
Click to expand...
Click to collapse
Mab i just did a factory reset and that bug still exists. What can i do please tell me!!!!!!!!!